Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date21 Dec 2024
Closing Date11 Jan 2025
Tender Amount₹ 48,61,000
Costs
EMD
₹ 98,000Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Repair Replacement Of Old Unserviceable Street Light Fitting Flood Light Highmast Light Junction Box Painting Of Lt Ht Poles
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_689904_1Tender No
GE/RND/T-78/AGR/2024-2025Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://mes.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Supply and spread clean dry sand for cable cushioning in trenches all as specified in clause 19.75 of SSR Part-I complete all as specified and as directed. Note :- Punned thickness shall be measured and paid.
103.25
-
-
... More
M&L for brick, subclass 'B' well burnt, laid dry flat in trenches for protection of cable with a maximum gap of 10 mm between two consecutive brick over LT cable, complete all as specified and as directed.
11.5
-
-
... More
Excavation in trenches not exceeding 1.5 m deep & not exceeding 1.5 m wide and getting out in soft / loose soil including leveling and ramming complete all as specified and as directed.
272
-
-
... More
Returning, refilling in trenches exvcavated soils, including spreading leveling & well ramming in layers not exceeding 25 cm thick complete all as specified and directed.
136.3
-
-
... More
Removal of excavated surplus soil to a distance n.exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.
136.1
-
-
... More
Dismantling and taking down unserviceable street light / security light fitting/hanger light(highbay type) of 30/45/48/60/70/90/120 watt from existing Bldg or Street light pole after disconnecting all electrical connections for repair or replacement of unserviceable parts and re-fixing the same after making it serviceable or fixing new light including all electrical connections complete all as specified and directed. Note :- If new light is fixed it will be measured and paid separately.
150
-
-
... More
Dismantling and taking down unserviceable High mast lantern complete set ( 9 Nos x 180 watt / 8 Nos x 180 watt ) from high mast pole after disconnection all electrical connections and refixing the same after making it serviceable including all electrical connections complete all as specified and directed.
4
-
-
... More
Dismantling and taking down unserviceable street light driver of 30/45/48/60 watt from existing LED street light after disconnecting all electrical connections for repair or replacement of unserviceable parts and re-fixing the same after making it serviceable and including all electrical connections complete all as specified and directed.
45
-
-
... More
S&F in repair New generation energy saving and environmental friendly long life LED street light fitting 45 Watt,made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 complete all as specified and directed.
20
-
-
... More
S&F in repair LED Energy saving, environment friendly, long life, exclusive innovative die-cast aluminium flood light 180 Watt, with highly efficient LEDs as light source, suitable for highlighting architectural features or retail spaces complete all as specified and directed.
16
-
-
... More
M&L for Wiring for circuit/submain wiring witg 2 run of 1.5 sqmm, FRLS PVC insulated single core, copper conductor for phase and neutral and 1 run of same size of copper conductor for earth wire, in PVC Conduit of size 20 mm dia including fixing clamp, nuts, bolts, screw etc and connectiin up with street light/ security light/ junction box, including dismantling/ taking down of old unserviciable wiring circuit from existing Pole, complete all as specified and directed by Engr- in-Charge.
150
-
-
... More
Disconnecting the all electrical connections from street light junction box/timer panel and taking out the loop of XLPE UG cable of any size and connecting to the street light junction box/ timer panel after cutting the faulty/burnend out end and opening of UG cable loop complete all as specifed and directed.
Note:-
1.Taking out the old brick and relaying the same after opening of loop shall be included in quoted rate.
2.Exavation work as required for LT cable ( Depth upto than .5 M from GL and width not less than .4 M) shall be included in the quoted rate.
3.Sand as required will be measured and paid seperately.
4.Material required for electrical connections such as lugs,cable gland ,PVC tape etc shall be included in the quoted rate.
40
-
-
... More
S& F Integral LED aviation light 10 watt luminiaries comprising of aluminium housing with polycornonate enclosure including connecting up with twin core twisted flexible copper conductor cable including taking out the old one all as specified and directed. Note: Cutting,drilling,welding,GI nuts,bolts and washers as required for fitting of LED aviation light at the place of conventional aviation light shall be included in quoted rate.
3
-
-
... More
M & L for old painted surfaces of LT/HT Steel tubular poles of any size shape and height complete and applying synthetic enamel paint with alternate block of white /black upto 5 feet height from ground level including writing the pole No with black enameled paint of size 70 mm wide and 100 mm height, and applying two coats of aluminium paint on the balance portion of pole after necessary preparation of surfaces and cleaning the vegetation approximately 4 square meter around the pole including following works complete all as specified and directed. (a) Cross arms (each pole 2 Nos).
(b) 45/50 mm dia bracket (each pole 1 Nos) including clamps Note :- for items 17 (a), (b) Two coats of aluminimum paint will be applied and deemed to be included into quoted rate .
170
-
-
... More
Supply and erecting in true vertical position steel tubular swaged poles type 410 SP-22 (8.5 meter long) complete with CI base plate pole cap,finial taper plug,bolts, nuts, washers etc including painting with two coats of synthetic enamel paint over a coat of red oxide primer including taking out old unserviceable pole complete all as specified and directed. Note: (i) The portion above coping shall be painted in alternative bands of black & white colours starting with black colour (each band of 30 CM wide) by two coats of Synthetic enamel paint upto 1.5 meter height and the cost of same shall be deemed to be included in the quoted rate.
(ii) The pole numbers etc shall be enumerated on the poles and the cost of writing letters with synthetic enamel paint shall be deemed to be included in the rate quoted. (iii) PCC shall be measured and paid seperately.
(iv) The rates also include drilling of holes in steel tubular poles for continuous G.I. earth wire etc. to the required size and number.
(v) Excavation and removing surplus soil is deemed to be included in quoted rates.
10
-
-
... More
M&L for PCC 1:2:4 type B1 (using 20 mm graded agregrate) as in coping in foundation of pole including necessary form work complete all as specifies and directed.
1.9
-
-
... More
M&L for PCC 1:3:6 type C2 using 40 mm graded agregrate as in foundation in mass concreting of pole including necessary form work complete all as specifies and directed.
6.6
-
-
... More
M&L for GI pipe (light grade) with all fittings laid in trenches/wall complete for protection UG cable when crossing the road of size 40 mm bore complete all as specifies and directed.
54
-
-
... More
M&L for boring of holes by manually / machine under road, pavement, hard standing by trenches for laying of 40 mm GI pipe for cable laying, complete all as specified and directed. Note :- GI Pipe will be measured and paid serparately.
30
-
-
... More
S&F street light bracket made out GI Tubing, 40 mm dia medium grade of length 1.5 Mtr rendering bend of 120 degree including 2 pairs of clamps 30mm X 5 mm including nuts,bolts,washers including painting with two coat of synthetic enamel paint over a coat of red oxide primer on external surface of brackets complete all as specified and directed.
40
-
-
... More
Material and Labour for earthing complete with Steel earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded by 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron earth wire 4.00 mm dia by means of GI nuts, bolts and washers. GI wire shall be laid in 20 mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following provisions complete all as specified and shown in electrical plate No 3 of SSR Part-I & including testing on completion and taking out old materials of earthing :-
(a) GI wire of 4 mm dia. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits)
(c) Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1, exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel TMT bar 75mm centre to centre both ways with 2 Nos MS handles of 12mm dia mild steel TMT bars suitable for carrying of pit cover.
(d) All PCC work shall be in 1:2:4 type B-1 using 20mm graded stone aggregate.
25
-
-
... More
M& L for fixing junction box made of plastic material of size suitable to accommodate 4 bus bar and MCB ,conical cable gland aluminium lugs, Protection Class IP 65,04 nos aluminium bus bar of size 25x3 mm for three phase and neutral including 01 nos 06 Amps MCB SP for controlling street light and 2 Nos MS clamp of size 30x5 mm complete with nut, bolt and washers for mounting the junction box on street light pole complete all as specified and directed
50
-
-
... More
Supply & fixing PVC insulated aluminium conductor 4.0 Sqmm 2 Core cable with 1x4.0 sqmm PVC instulated aluminium conductor as earth wire for service connection of street light from junction box of LT electric pole complete all as specified and directed.
900
-
-
... More
Supply & fixing PVC insulated aluminium conductor 10 Sqmm 2 Core cable with 1x10 sqmm PVC instulated aluminium conductor as earth wire for service connection complete all as specified and directed.
250
-
-
... More
S&F MCCB TPN 630 Amp,36 KA Amp 415 Volts, 50 Hz suitable as per existing sample and connection with copper lugs including taking down old unserviceable complete all as directed.
2
-
-
... More
S&F MCCB TPN 400 Amp,36 KA 415 Volts, 50 Hz suitable as per existing sample and connection with copper lugs including taking down old unserviceable complete all as directed.
2
-
-
... More
S&F MCCB TPN 250 Amp,36 KA 415 Volts, 50 Hz suitable as per existing sample and connection with copper lugs including taking down old unserviceable complete all as directed.
2
-
-
... More
S&F MCCB TPN 160 Amp 415 Volts, 50 Hz suitable as per existing sample and connection with copper lugs including taking down old unserviceable complete all as directed.
8
-
-
... More
S&F MCCB TPN 125 Amp 415 Volts, 50 Hz suitable as per existing sample and connection with copper lugs including taking down old unserviceable complete all as directed.
24
-
-
... More
S&F MCCB TPN 63 Amp 415 Volts, 50 Hz suitable for existing and connection with copper lugs including taking down old unserviceable complete all as directed.
8
-
-
... More
S&F MCCB TP 250 Amp,36 KA 415 Volts, 50 Hz suitable as per existing sample and connection with copper lugs including taking down old unserviceable complete all as directed.
4
-
-
... More
S&F MCCB TP 160 Amp 415 Volts, 50 Hz suitable as per existing sample and connection with copper lugs including taking down old unserviceable complete all as directed.
6
-
-
... More
S&F MCCB TP 125 Amp 415 Volts, 50 Hz suitable as per existing sample and connection with copper lugs including taking down old unserviceable complete all as directed.
6
-
-
... More
S&F MCCB TP 63 Amp 415 Volts, 50 Hz suitable for existing and connection with copper lugs including taking down old unserviceable complete all as directed.
8
-
-
... More
S&F MCB TPN 63 Amp,C curve, 415 Volts, 50 Hz suitable for existing and connection with copper lugs including taking down old unserviceable complete all as directed.
17
-
-
... More
S&F MCB TPN 32 Amp,C curve, 415 Volts, 50 Hz suitable for existing and connection with copper lugs including taking down old unserviceable complete all as directed.
13
-
-
... More
S&F MCB SPN 32 Amp,C curve, 415 Volts, 50 Hz suitable for existing and connection with copper lugs including taking down old unserviceable complete all as directed.
13
-
-
... More
M&L for preparation of old painted steel surface of any description, over 10cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
70
-
-
... More
M & L for preparation of old painted surface of steel surface of any description, over 10cm in width or girth apply one coat of synthetic enamel paint complete all as specified and directed.
70
-
-
... More
S & F LED indicating light ( R,Y,B ) of LT panel suitable for 230 V ,50 Hz as per existing sample including taking out the old unserviceable complete all as specified and directed. .
20
-
-
... More
S & F Voltmeter for LT panel along with selector switch having four positions suitable for upto 600 V ,50 Hz as per existing sample including taking out the old unserviceable complete all as specified and directed.
20
-
-
... More
S & F Ammeter for LT panel along with CT and selector switch suitable for upto 200 Amp ,50 Hz as per existing sample including taking out the old unserviceable complete all as specified and directed.
20
-
-
... More
S & F steel lock for LT electric panel in place of old unserviceable lock inclding taking down the old unserviceable as per existing sample complete all as specified and directed.
20
-
-
... More
S & F sdoor hinges for LT electric panel in place of old unserviceable lock inclding taking down the old unserviceable as per existing sample complete all as specified and directed.
30
-
-
... More
Supply installation testing and commissioning of street light panel single phase SWADEEP-66-5KW1P or equivalent as approved by GE suitable for max load of 5 KW with natureswitch sensor and hensel enclosure conforming to IP 66,25 amp MCB suitable and including mounting on wall/pole for control street light/aviation light including connections with the cable gland aluminium lug, MS FIixing clamp ,cutting the hole in wall of suitable size including taking out the old main switch/MCB/MCCB complete all as specified and directed.
2
-
-
... More
Supply installation testing and commissioning of street light panel three phase SWADEEP-66-5KW3P or equivalent as approved by GE suitable for max load of 5 KW with natureswitch sensor and hensel enclosure conforming to IP 66,25 amp per phase MCB suitable and including mounting on wall/pole for control street light/aviation light including connections with the cable gland aluminium lug, MS FIixing clamp ,cutting the hole in wall of suitable size including taking out the old main switch/MCB/MCCB complete all as specified and directed.
2
-
-
... More
Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron strip of 25x4 mm by means of Copper nuts, bolts and washers. Strip laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following complete all as specified and shown in electrical plate No 3 of SSR Part-I & testing on completion :-
(a) GI strip of size 25mm x 4mm. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits)
(c) Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel bar 75mm centre to centre with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover.
24
-
-
... More
S & F TPN DBs double door vartical type suitable for incomer MCCB 125 Amps TPN as incomer and 12 Nos MCB SP as outgoing 415 Vol,50Hz including taking down the old unserviceable complete all as specified and directed. Note: Cost of MCCB and MCB will be measured and paid seperately.
14
-
-
... More
S&F MCB’s single pole, 10 KA ,6 Amp to 30 Amp 240 Volts,and of ''B'' series with required wiring connections and lugs etc including taking down old unserviceable complete all as directed.
112
-
-
... More
S&F MCB’s single pole and neutal,32 Amp to 40 Amp 240 Volts,and of ''B'' series with required wiring connections and lugs etc including taking down old unserviceable complete all as directed.
48
-
-
... More
Supply and fixing LT panel board outdoor type, double door cubical compartment pedestal mounting type fabricated CRCA sheet of 3.15 mm thick outer sheet and 2.00 mm thick inner sheet with both side open type, suitable for 3 phase 4 wire system, 415 volt with insulted Copper bus bar of size suitable to carry 1.5 times current of main MCCB incomer should be provided to length/width of the panel for free and fair connection of the cable for MCCB, finished with powder coated, dust vermin proof, ventilated compartment door and necessary including arrangement for fixing on wall indoor with the following items including connection with suitable capacity of copper wire for internal wiring and connecting to LT UG cable using suitable size of lugs and testing and commissioning with foundation, including taking out the old U/S panel board from position and removing from site and make all electrical connection with existing outgoing/incoming cable to the new panel with suitable size lugs complete all as directed:-
Incoming:
a) MCCB 125 Amps ,25 kA, TPN 415 Volt ,Thermally adjustable - 01 Nos
b) Copper Bus bar chamber strip size mm suitable for 250 Amps including insulator , hylem sheet , cable connection etc
c) Indicator lamp LED type (RYB) –01 Set.
d) Volt meter Digital type 0-500V with selector switch. One set.
e) Amps meter Digital type 0-500 A with CT & selector switch. 01 No. One set
Outgoing:
a) MCCB 63 Amps ,25 kA, TPN 415 Volt ,Thermally adjustable - 05 Nos "b) MCC DP 32 Amps -01 Nos
"
c) All interconnections between the main bus bar as well as outgoing MCCB shall be carried out with TPN copper bus bar of rating not less than 1.5 times rated capacity of outgoing individual MCCB
"Note :(i) Panel should be manufactured from CPRI approved firm only. (ii) Panel platform should be 1.5 ft hight from ground level (iii) connecting of existing UG cable as per site requirement"
2
-
-
... More
Supply and fixing LT panel board outdoor type, double door cubical compartment pedestal mounting type fabricated CRCA sheet of 3.15 mm thick outer sheet and 2.00 mm thick inner sheet with both side open type, suitable for 3 phase 4 wire system, 415 volt with insulted Copper bus bar of size suitable to carry 1.5 times current of main MCCB incomer should be provided to length/width of the panel for free and fair connection of the cable for MCCB, finished with powder coated, dust vermin proof, ventilated compartment door and necessary including arrangement for fixing on wall indoor with the following items including connection with suitable capacity of copper wire for internal wiring and connecting to LT UG cable using suitable size of lugs and testing and commissioning with foundation, including taking out the old U/S panel board from position and removing from site and make all electrical connection with existing outgoing/incoming cable to the new panel with suitable size lugs complete all as directed:-Incoming:
a) MCCB 250 Amps ,25 kA, TPN 415 Volt ,Thermally adjustable - 01 Nos
b) Copper Bus bar chamber strip size mm suitable for 250 Amps including insulator , hylem sheet , cable connection etc
c) Indicator lamp LED type (RYB) –01 Set.
d) Volt meter Digital type 0-500V with selector switch. One set.
e) Amps meter Digital type 0-500 A with CT & selector switch. 01 No. One set
Outgoing:
a) MCCB 160 Amps ,25 kA, TPN 415 Volt ,Thermally adjustable - 02 No
b) MCCB 125 Amps ,25 kA, TPN 415 Volt ,Thermally adjustable - 02 Nos c) MCCB 63 Amps ,25 kA, TPN 415 Volt ,Thermally adjustable - 01 Nos
"d) MCC DP 32 Amps -01 Nos
"
e) All interconnections between the main bus bar as well as outgoing MCCB shall be carried out with TPN copper bus bar of rating not less than 1.5 times rated capacity of outgoing individual MCCB
"Note :(i) Panel should be manafactured from CPRI approved firm only. (ii) Panel platform should be 1.5 ft hight from ground level (iii) conecting of existing UG cable as per site requirement"
3
-
-
... More
S&F in repair New generation energy saving and environmental friendly long life LED street light fitting 60 Watt,made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07. complete all as specified and directed.
20
-
-
... More
Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed
15
-
-
... More
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub flooring on existing sub base surfaces of OH tank,pump houses finished cement concrete surface even and fair without using extra cement including necessary form work and concrete (PCC) to be cast in alternate bays complete all as specified and directed. complete all as specified and directed.
15
-
-
... More
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.
150
-
-
... More
M&L for moorum filling floors or pavings laid in layers n exc 15 cm thick ,spread, levelled, and blind earth and rammed in cluding watering all as
specified and directed.
6
-
-
... More
Taking down cement/ lime plaster of any description on brick work or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
50
-
-
... More
M&L for 15mm thick rendering on surfaces of brick work or stone walling in CM 1:6 finishing the surface even and fair complete all as specified and directed.
50
-
-
... More
Supplying, laying, jointing & testing of 1100 volts grade, heavy duty, LT XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed,3.5 Core, 185 Sqmm nominal cross section in service connections laid in loops /ducts, along wall /pole or under floor /road or laid in trenches including taking out old unserviceable cable complete all as specified and as directed.
40
-
-
... More
All as per ser item No. 63.00 above but 120 Sqmm 3.5 Core.
100
-
-
... More
All as per ser item No. 63.00 above but 95 Sqmm 3.5 Core.
120
-
-
... More
All as per ser item No. 63.00 above but 70 Sqmm 3.5 Core.
60
-
-
... More
All as per ser item No. 63.00 above but 50 Sqmm 3.5 Core.
150
-
-
... More
All as per ser item No. 63.00 above but 35 Sqmm 3.5 Core.
200
-
-
... More
All as per ser item No. 63.00 above but 25 Sqmm 4 Core.
300
-
-
... More
Supplying, laying, jointing & testing of 11000 volts grade, heavy duty, HT XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed, 3 Core, 95 Sqmm nominal cross-section in service laid in loops /ducts, along wall /pole or under floor /road or laid in trenches connections including taking out old unserviceable cable complete all as specified and as directed.
110
-
-
... More
S&F in repair cable jointing kit for 11 KV (earthed) grade cable, for straight through hot shrink type joint complete with jointing material and accessories suitable for 3 Core XLPE armoured aluminium conductor cable of 95 Sqmm complete all as specified and directed.
2
-
-
... More
S&F in repair Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm complete all as specified and as directed.
4
-
-
... More
S&F in repair Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm complete all as specified and as directed.
4
-
-
... More
S&F in repair cable jointing kit for 1.1 KV (earthed) grade cable for straight through Heat shrink type joint complete with jointing material and accessories suitable for 3.5 Core XLPE armoured aluminium conductor cable of 120 Sqmm complete all as specified and as directed.
4
-
-
... More
S&F rapair cable jointing kit for 1.1 KV (earthed) grade cable for straight through Heat shrink type joint complete with jointing material and accessories suitable for 3.5 Core XLPE armoured aluminium conductor cable of 95 Sqmm complete all as specified and as directed.
4
-
-
... More
S&F rapair cable jointing kit for 1.1 KV (earthed) grade cable for straight through Heat shrink type joint complete with jointing material and accessories suitable for 3.5 Core XLPE armoured aluminium conductor cable of 70 Sqmm complete all as specified and as directed.
3
-
-
... More
S&F in repair Copper lugs, E-blot size 10.5 mm, suitable for 25 sqmm 3.5 core to 120 sqmm 3 core cable including crimping/ connecting with UG cable and panel board complete all as specified and directed.
120
-
-
... More
Supply ,installation, testing and commissioning of canopy headed HT 11K volt grade, 3 phase, , AC, 50 cycle, feeder piller box size 1200x1000x1000 mm, factory made outdoor pedestal type double door, fabricated out of 3.15 mm thick CRCA sheet with powder coated painting in side and outside of approved shade ,locking arrangement with duplicate keys two earthy terminal suitable cable gland for all incoming and outgoing cable grouting of feeder pillar box 15 cm above ground level by providing 90 cm long angle iron of size 50x50x6 mm welded on all the four comers embedded in PCC (1:2:4) using 20 mm graded stone agg upto 30 CM deep and 45 CM above from normal ground level complete all as specified and directed incl the following components:- (a) The panel will be having copper bus bar of size 400×40×6 mm 03 strips with porcelain HT long post insulator
4
-
-
... More
S&F in replacement busbar chambers 200 Amps 6 way, 415 Volts, complete all as specified and directed.
2
-
-
... More
S&F in replacement busbar chambers 400 Amps 6 way, 415 Volts, complete all as specified and directed.
2
-
-
... More
Material and labour for GI earting wire of size 4mm dia galvanised iron or steel wire including nesassary welding and connecting with existing earthing system including taking out the old on complete all as specified and directed.
60
-
-
... More
M & L for Galvanised iron tubing,15 mm bore, light grade with all fittings for protection of GI Earth wire including all fixing accessories complete all as specified & directed.
50
-
-
... More
S&F in repair on load change over switch in existing LT Panel including enclosure, 1000 Amp, 4 pole with advance neutral including making cable connection to the change over switch, fixing on wall/ floor with mild steel fastener, nut/bolts complete all as specified and directed.
1
-
-
... More
S&F in repair on load change over switch including enclosure, 400 Amp, 4 pole with advance neutral including making cable connection to the change over switch, fixing on wall/ floor with mild steel fastener, nut/bolts complete all as specified and directed.
2
-
-
... More
M & L for filtration/dehydration transformer oil of transformer capacity 50 KVA to 630 KVA indoor/outdoor type, pole mounted / plinth mounted in situ till achieve dielectric strength min 40 KV at 4mm gap complete all as specified and as directed.
1100
-
-
... More
M & L for topping up/replacement of transformer oil with new transformer oil suitable for working voltage 11000 volts grade including necessary dehydration to achieve dielectric strength min 40 KV at 4mm gap complete all as specified and as directed. Note for ser item No 1 & 2 :- (a) New transformer oil to be bought in company sealed ISI marked container with or original test certificate (b) Filtration /dehydration of transformer oil shall be carried out at the location where transformer is installed and necessary filter/dehydration plant having pressure gauge, hour meter, temperature gauge to be brought at site by contractor (c) During process of filtration of oil, transformer shall be on load.
200
-
-
... More
M&L for silica gel grain in the breather assembly of transformer complete all as specified and directed
Note :- Silica gel will be supplied in breather assembley as per existing size and cost is deemed to be included in quoted rates.
12
-
-
... More
S&F LT bush insulator complete with outer bushing studs made out of brass including oil seal ,gaskets as per existing sample for three indoor/outdoor type transformer of cap for upto 630 KVA (set of four) including taking out the old complete all as specified and directed.
(a) Cost of minor spares i.e. nut bolt and washer if required to complete the job is deemed to be included in quoted rates.
2
-
-
... More
S&F HT bush insulator complete with outer bushing stud, made out of brass including oil seal ,gaskets as per existing size for indoor/outdoor transformer of cap for upto 630 KVA for 11K / 440 Volts including taking out the old all as specified and directed (Set of three)
(a) Cost of minor spares i.e. nut bolt and washer if required to complete the job is deemed to be included in quoted rates.
2
-
-
... More
Supply and Fixing Packing gasket for top cover and terminal box for HT and LT side as per existing sample for out door/indoor type transformer including nuts, bolts and washer etc all as specified for upto 630 KVA transformer (after draining out transformer oil and refilled to the same transformer). (a) Cost of minor spares i.e. nut bolt and washer if required to complete the job is deemed to be included in quoted rates.
4
-
-
... More
M&L for painting of transformer outer surface with one coat of synthetic enamel paint for transformer capacity 100-250 KVA after preparation of old painted surface using sprayer complete all as specified and directed. Note:- (i) During process of painting transformer will be under shut down for the period and the rate deemed to be included for running the sprayer machine with own arrangement by the contractor (ii) After completion of painting HT/LT bushing, oil inspection glass and name plate to be made clean using volatile cleaner, complete all as specified and directed.
4
-
-
... More
All as per item No 91.00 above but capacity of transformer 400-630 KVA.
2
-
-
... More
M&L air break switch gang operated device HT 11 KV triple pole outdoor type with 12 insulator 200 Amps rating with drop out fuse assly with fuse carrier and the fuse element mounted on insulator and steel frame mechanically operated with operating mechanism consisting of operating rod of 25mm bore light grade GI pipe of suitable length operative from ground level and with locking arrangement with MS flat iron clamp 50 x 6 mm including MS channel of suitable size and length to fixing GOD including nuts, bolts and washers all as specified and as directed including taking out old unserviceable complete all as specified and as directed.
2
-
-
... More
S&F pin type insulator, porcelain vitreous white, brown or green insulator including one galvanized mild steel spindle two galvanized iron washers and one galvanized iron nut 100mm height 65 mm dia for working pressure 1100 volts including desmantling old unserviceable insulator complete all as specified and as directed.
15
-
-
... More
M&L aluminum conductor steel reinforced (ACSR) including copper binding wire complete all as specified and as directed.
0.5
-
-
... More
Supply & fixing/crimping in replacement of old/overheated jumpers/service connection with Bimetallic PG Clamp of aluminum alloy with GI nut & bolt and conducting jelly, suitable for weasel / Mink or any other ACSR Conductor including taking out the old complete all as specified and required at site or as directed.
6
-
-
... More
M&L Cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and as directed.
0.5
-
-
... More
Material and labour for cutting bushes, grass throny, small plants/ trees up to height 5m in and around the E/M installation and electric FPB and including surface dressing and removing the material outside Defence land complete all as specified and directed.
80
-
-
... More
S&F in repairs lightning arrestor HT,11 KV, 10 KA expulsion type complete with all fittings,transmission class complete all as specified and as directed.
3
-
-
... More
S & F Disc type insulator, porcelain, vitreous 145mm high and 255mm dia ball and socket type, white, brown or green 'Two-in-series' assembly for tension with tension clamps for conductors, working pressure 11000 volts including taking down old unserviceable insulator complete all as specified and as directed.
12
-
-
... More
S & F steel tubular swaged pole complete with cast iron base plate finial taper plug,bolts,nuts,and screw as specified type SP-55 (11.0 metres long) including fixing of cross arms ,insulators and all electrical cables/ACSR conductors/earthwires and painting with two coats of aluminium paints over a coat of red oxide primer of pole as per sample including taking out the old unserviceable complete all as specifies and directed. Note: (i) The portion above coping shall be painted in alternative bands of colours starting with blue colour (each band of 30 Cm wide) by two coats of Synthetic enamel paint upto 1.5 meter height and the cost of same shall be deemed to be included in the rate quoted.
(ii) The pole numbers etc shall be enumerated on the poles and the cost of writing letters with synthetic enamel paint shall be deemed to be included in the rate quoted. (iii) PCC and exavation and removing surplus soil shall be measured and paid seperately.
(iv) The rates also include drilling of holes in steel tubular poles for continuous G.I. earth wire etc. to the required size and number.
2
-
-
... More
Disconnecting & taking out non functional VCB of circuit current 30 Amps and busbar current 400 Amps, 50 Hz, Panel Type : UN1 VAC for 11 KV Make : Crompton Greaves dismantling / opening of the VCB for servicing / overhauling, taking out and removing unserviceable /defective parts including cleaning & servicing ,greasing, oiling of the parts etc and replacement of unserviceable parts with new one, reassembling the VCB after overhauling / servicing and its testing complete all as specified and directed by Engineer-in-Charge. Notes :- (i) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced parts shall be measured and paid for separately.
6
-
-
... More
Supply only Tripping Coil 24 / 110V DC Suitable for VCB 11000. Volt. of 400 Amp, 3.5 MVA all as per Sample.
2
-
-
... More
Supply only Closing Coil 24 / 110V DC Suitable for VCB 11000. Volt. of 400 Amp, 3.5 MVA Sample.
2
-
-
... More
Supply only Segment Gear Suitable for VCB 11000. Volt. of 400 Amp, 3.5 MVA Sample.
2
-
-
... More
Supply only Spring Charging Moter 220V. Suitable for VCB 11000. Volt. of 400 Amp, 3.5 MVA Sample.
2
-
-
... More
Supply only Tripping Latch / Saft Suitable for VCB 11000 Volt. of 400 Amp., 3.5 MVA all as per Sample.
2
-
-
... More
Supply only Closing Lactch / Lever Suitable for VCB 11000 Volt.
of 400 Amp, 3.5 MVA all as per Sample.
2
-
-
... More
Supply only TNC Switch Suitable for VCB 11000 Volt. of 400 Amp, 3.5 MVA all as per Sample.
2
-
-
... More
Supply only Auxiliary Switch 6 No-6NC Suitable for VCB 11000 Volt. of 400 Amp., 3.5 MVA Sample.
2
-
-
... More
Supply only Panel Spout Set, 11 KV Suitable for VCB 11000 Volt., of 400 Amp. 3.5 MVA Sample.
6
-
-
... More
Supply only Jaw Contact Suitable for VCB 11000. Volt. of 400 Amp, 3.5 MVA Sample.
2
-
-
... More
Supply only Insulator Type - Resin Cast Epoxy, Size - 61mm/130mm 11kV Suitable for VCB 11000. Volt. of 630 Amp, 3.5 MVA all as per Sample.
20
-
-
... More
Supply only Vacuum Intrepter 11kV Suitable for VCB 11000. Volt. of 400 Amp, 3.5 MVA Sample.
1
-
-
... More
Supply only Current Transformer (C.T) Resin Cast Epoxy, 11kV Suitable for VCB 11000 Volt. of 400 Amp., 3.5 MVA all as per Sample.
3
-
-
... More
Supply only Potential Transformer (P.T), Dry Type Resin Cast Epoxy, 11kV Suitable for VCB 11000 Volt. of 400 Amp., 3.5 MVA all as per Sample.
2
-
-
... More
Supply only LED Indigation Lamp 240V. DC Red, Green and White, 11kV Suitable for VCB 11000. Volt. of 400 Amp, 3.5 MVA Sample.
10
-
-
... More
Supply only LED Indigation Lamp 220V. DC Blue, 11kV Suitable for VCB 11000. Volt. of 400 Amp, 3.5 MVA Sample.
10
-
-
... More
Supply only Protection 3 Phase Over Current + Earth Fault Relay, 11kV Suitable for VCB 11000 Volt. of 400 Amp., 3.5 MVA all as per Sample.
2
-
-
... More
S&F DC power pack for VCB AC input 90-270 Volts DC output-24 V complete
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%