Military Engineer Services Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Building Construction
Electrical and Electronics
Water Storage And Supply
Electrical Works
Eprocure
Opening Date22 Oct 2024
Closing Date21 Dec 2024
Tender Amount₹ 52,05,40,000
Costs
EMD
₹ 15,00,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Summary
Provn Of Otm Accn For Engr Regt At Jhansi Cantt (phase One Of Two Phases) (job Ser No. S/2990) Under Ge Jhansi
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_680716_1Bid Award Id
ViewTender No
CA NO. CEBZ / JHA / TOKEN / 01 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part- II (Ref prepriced schedule attached seperately)
1
1494321
-
... More
Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION AND HOT WATER SUPPLY WORKS as listed in Schedule ‘A’ Part- III (Ref prepriced schedule attached seperately)
1
7932233
-
... More
Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part- IV (Ref prepriced schedule attached seperately)
1
903223
-
... More
Lump sum price worked out by the contractor for EXTERNAL ELETRIC SUPPLY AND DG SET WORKS as listed in Schedule ‘A’ Part- V (Ref prepriced schedule attached seperately)
1
7457464
-
... More
Lump sum price worked out by the contractor for ROAD AND HARDSTANDING WORKS as listed in Schedule ‘A’ Part- VI (Ref prepriced schedule attached seperately)
1
7692752
-
... More
Lump sum price worked out by the contractor for AREA DRAINAGE WORKS as listed in Schedule ‘A’ Part- VII (Ref prepriced schedule attached seperately)
1
801264
-
... More
Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule ‘A’ Part-VIII (Ref prepriced schedule attached seperately)
1
2837286
-
... More
Lump sum price worked out by the contractor for RETAINING WALL CHAINLINK FENCING AND GATE WORKS as listed in Schedule ‘A’ Part-IX (Ref prepriced schedule attached seperately)
1
5159874
-
... More
Lump sum price worked out by the contractor for LIGHTNING PROTECTION & CHEMICAL EARTHING WORKS as listed in Schedule ‘A’ Part-X (Ref prepriced schedule attached seperately)
1
107288
-
... More
Lump sum price worked out by the contractor for SUMMER APPLIANCES WORKS as listed in Schedule ‘A’ Part-XI (Ref prepriced schedule attached seperately)
1
1131842
-
... More
Lump sum price worked out by the contractor for ARBORICULTURE WORKS as listed in Schedule ‘A’ Part-XII (Ref prepriced schedule attached seperately)
1
599538
-
... More
Lump sum price worked out by the contractor for BASEKT BALL, VOLLEY BALL, BADMINTON, FOOTBALL AND HOCKEY GROUNDS WORKS as listed in Schedule ‘A’ Part-XIII (Ref prepriced schedule attached seperately)
1
974644
-
... More
Lump sum price worked out by the contractor for DEMOLITION / DISMANTLING WORKS as listed in Schedule ‘A’ Part-XIV (Ref prepriced schedule attached seperately)
1
1403071
-
... More
Lump sum price worked out by the contractor for EXCAVATION, EARTH WORK AND SITE DEVELOPMENT WORKS as listed in Schedule ‘A’ Part-XV (Ref prepriced schedule attached seperately)
1
16842211
-
... More
SCH 'A' Pt - XVI (MISCELLANEOUS ITEMS)
-
-
-
... More
INTERNAL WATER SUPPLY WORKS NOTE:- For items of internal Electrifications notes given at the beginning of Sch ‘A’ Part-II ( INTERNAL WATER SUPPLY WORKS) shall also be applicable.
-
-
-
... More
Supply and laying jointing and testing GI tubing of 65mm bore medium grade with and including all medium grade galvanised iron fittings and fixing assessories such as tee, elbows, bends, sockets, unions, plugs and sockets, short pieces connector and back nuts, deminishing pipe , cap plugs etc fixed complete to wall and ceiling or laid in floors complete, ISI Marked all as specified and directed.
98.8
-
-
... More
S&F two way bib cock with wall flange quarter turn (low flow) 16mm dia make- Jaquor model No KUP-35041PMGE (1.3 LPM) or equivalent model of makes mentioned in Appendix C complete all as specified and as directed by Engr-in-Charge.
257
-
-
... More
S&F gun metal, globe or gate valve (ISI Marked) with iron wheel head, screwed both ends for iron pipe of 65mm bore complete all as specified and directed.
12
-
-
... More
S&F fancy type long body bib tap, cast copper alloy (ISI Marked) with cruth, or butterfly handle, chromium plated, screwed down, screwed for iron pipe or brass and fixed for 15mm bore pipe (Jaquar Model No KUP-35037PMGE (1.3 LPM) or equivalent model of makes mentioned in Appendix C).
209
-
-
... More
S&F pillar taps/cock cast copper alloy with capstan head, chromium plated, fancy type screwed down high pressure with or without lettered " HOT or COLD" complete all as specified and as directed for 15mm bore dia of pipe (Jaquar Model No KUP-35001PMG (2.5 LPM) or equivalent model of makes mentioned in Appendix C).
253
-
-
... More
S&F 15mm bore push cock for urinal for iron pipe fixed (Make: Jaquar Model No PRS-CHR-073 (1.5 LPM) or equivalent model of makes mentioned in Appendix C).complete all as specified and directed
119
-
-
... More
S&F for chromium plated urinal spreader for urinal for fixing with 15mm dia pipe (Jaquar Model No ALD-CHR-1043 or equivalent model of makes mentioned in Appendix C).
119
-
-
... More
S&F health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook with including making connections and fixed in position complete in all respect as specified with 1 mtr, flexible pipe 15mm bore (braided tube) & hook, complete all as specified and directed.
235
-
-
... More
S&F 15mm bore brass wall mixer (2 in 1) for mixing hot & cold water screwed down for iorn pipe including all fittings and flange etc, complete all as specified and directed (Make- Jaquar Model No FUS-29273UPR or equivalent model of makes mentioned in Appendix C).
9
-
-
... More
S&F 15mm bore brass WHB mixer (2 in 1) for mixing hot & cold water screwed down for iorn pipe including all fittings and flange etc, complete all as specified and directed (FLR-CHR-5167NBG-2.5 LPM or equivalent model of makes mentioned in Appendix C).
11
-
-
... More
S&F 15mm bore brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed (CON-CHR-309 KNG-2.5 LPM or equivalent model of makes mentioned in Appendix C).
1
-
-
... More
INTERNAL ELECTRIFICATION AND HOT WATER SUPPLY WORKS NOTE:- For items of INTERNAL ELECTRIFICATION AND HOT WATER SUPPLY WORKS notes given at the beginning of Sch ‘A’ Part-III ( INTERNAL ELECTRIFICATION AND HOT WATER SUPPLY WORKS) shall also be applicable.
-
-
-
... More
M&L point wiring for light point wiring complete with 1.5 Sq.mmm PVC insulation unsheathed muilt-starnded FRLSH copper conductor 1100 Volts grade draw through in and including 20 mm dia PVC conduit and conduit accessories, concealed in walls and terminated to and including provision of modular metal flush boxes (metal switch board of any type and size) with modular metal frame plate and white cover for housing switch, sockets, regulators etc, including 1.5 sqmm PVC insulated unsheathed multi-stranded FRLSH copper conducotor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed for the following points (Ser Item No 5.02 to 5.07) .
NOTE;- The quoted rate is deemed to inclusive of cost of metal flush boxes, modular white cover plate.
-
-
-
... More
One light point controlled by one way 6A modular switch.
2598
-
-
... More
One fan point controlled by one way 6A modular switch.
802
-
-
... More
One Exhaust fan point controlled by one 6 Amps one-way modular switch
149
-
-
... More
One bell point controlled by one modular 6A bell push switch
4
-
-
... More
One light point controlled by 6A, 2-way modular switches
8
-
-
... More
All as per Sl item No. 5.01 above, but with cable 1.5 sqmm for phase and neutral & 1.5 sqmm for earth continuity complete for 6 Amps socket point on same board complete all as specified and directed
201
-
-
... More
All as per Sl item No. 5.01 above, but with cable 2.5 sqmm for phase and neutral & 2.5 sqmm for earth continuity complete for 6/16 Amps socket point on independent board complete all as specified and directed
983
-
-
... More
S&F LED tube light fitting batten type, 20 W, 230v , efficacy 120 Lumens per watt, colour temprature 6500 K (Cool White), power factor greater than 0.90, polycarbonate body , CRI 80, IP rating IP 20,THDv within 5% and THDi (8-10%) and integrated electronic driver complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose all as specified and directed. Notes :- 1.The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and nothing shall be paid extra on this account. 2. Warranty for replacement of each LED Light fitting shall not be less than 05 years from the date of purchase. 3. Date of Purchase shall be marked on each fixture with permanent marker for redeeming warrenty benifits.
1791
-
-
... More
Supply & Fixing LED tube light fitting batten type. 10 W, 230v , efficacy 120 Lumens per watt, colour temprature 6500 K (Cool White), power factor greater than 0.90, polycarbonate body , CRI 80, IP rating IP 20, THDv within 5% and THDi (8-10%) complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size from ceiling rose all as specified and directed. Notes :- 1.The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and nothing shall be paid extra on this account. 2. Warranty for replacement of each LED Light fitting shall not be less than 05 years from the date of purchase. 3. Date of Purchase shall be marked on each fixture with permanent marker for redeeming warrenty benifits.
842
-
-
... More
S & F LED Security light fitting 25 Watt, luman efficacy of LED 140 lm/W, PF 0.95, THD 10%, colour temprature 6500K, CRI 70, system lumen not less then 2600 Lm, made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens with toughed glass having bottom separate driver compartment with IP 66 Protection and Impact resistant of IK 07 etc and all accessories previewed complete including mounting bracket of GI Pipe 40 mm inner dia light grade of required length and shape incl bending, forging or welding etc and suitable bolts and nuts with washers, including connecting with PVC insulated multi stranded copper flexible cable of size 0.5 sq mm three core from ceiling rose to fitting all as specified an directed.
148
-
-
... More
S & F LED Down light surface mount 10 Watt, luman efficacy of LED 140 lm/W, PF 0.95, THD 10%, colour temprature 6500K, CRI 70, system lumen not less then 1400 Lm, made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens with toughed glass having bottom separate driver compartment with IP 66 Protection and Impact resistant of IK 07 etc and all accessories previewed complete including mounting and connecting with PVC insulated multi stranded copper flexible cable of size 0.5 sq m three core from ceiling rose to fitting all as specified an directed.
719
-
-
... More
S & F LED Medium Bay light 50 Watt, luman efficacy of LED 140 lm/W, PF 0.95, THD 10%, colour temprature 6500K, CRI 70, made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens with toughed glass having bottom separate driver compartment with IP 66 Protection and Impact resistant of IK 07 etc and all accessories previewed complete including mounting and connecting with PVC insulated multi stranded copper flexible cable of size 1.0 sq m three core from ceiling rose to fitting all as specified an directed.
14
-
-
... More
S&F Sheet metal enclosure for pre wired distribution board double door, vertical type powder coated triple pole & Neutral (VTPN), 6 way , with out MCCB, IP 54, three phase 415 volt with 200 Amps rated tinned electrolytic copper bus bar with neutral link complete all as specified and directed.
5
-
-
... More
S&F Sheet metal enclosure for pre wired distribution board double door, vertical type powder coated triple pole & Neutral (VTPN), 4 way with out MCCB,IP 54, three phase 415 volt with 200 Amps rated tinned electrolytic copper bus bar with neutral link complete all as specified and directed.
7
-
-
... More
S&F MCCB, Four Pole 200A, with breaking capacity 25 KA , adjustable thermal and fixed magnetic type, ics=100%icu, 415 Volts including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.
2
-
-
... More
S&F MCCB, Four Pole 160A, with breaking capacity 25 KA , adjustable thermal and fixed magnetic type, ics=100%icu, 415 Volts including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.
1
-
-
... More
S&F MCCB, Four Pole 125A, with breaking capacity 25 KA , adjustable thermal and fixed magnetic type, ics=100%icu, 415 Volts including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.
1
-
-
... More
S&F MCCB, Four Pole 100A, with breaking capacity 16 KA , adjustable thermal and fixed magnetic type, ics=100%icu, 415 Volts including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.
1
-
-
... More
S&F MCCB, Four Pole 63A, with breaking capacity 16 KA , adjustable thermal and fixed magnetic type, ics=100%icu, 415 Volts including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.
5
-
-
... More
S&F MCCB, Four Pole 32A, with breaking capacity 16 KA , adjustable thermal and fixed magnetic type, ics=100%icu, 415 Volts including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.
2
-
-
... More
S&F MCB TPN 63A, with breaking capacity 16 KA , adjustable thermal and fixed magnetic type, ics=100%icu,415 Volts including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.
5
-
-
... More
S&F MCB TPN 32A, with breaking capacity 16 KA , adjustable thermal and fixed magnetic type, ics=100%icu, 415 Volts including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.
1
-
-
... More
S&F MCB TPN 25A, with breaking capacity 16 KA , adjustable thermal and fixed magnetic type, ics=100%icu, , 415 Volts including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.
1
-
-
... More
S&F MCB TP, 63A with breaking capacity 16 KA , adjustable thermal and fixed magnetic type, ics=100%icu, 415 Volts including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.
5
-
-
... More
S&F MCB TP, 32A with breaking capacity 16 KA , adjustable thermal and fixed magnetic type, ics=100%icu,, 415 Volts including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.
6
-
-
... More
S&F MCB TP, 25A with breaking capacity 16 KA , adjustable thermal and fixed magnetic type, ics=100%icu, 415 Volts including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.
1
-
-
... More
S&F MCB SPN 63 Amp, 240 volts with breaking capacity 10 KA , adjustable thermal and fixed magnetic type, ics=100%icu, 'C' series complete all as specified and directed.
4
-
-
... More
S&F MCB SPN 40 Amp, 240 volts with breaking capacity 10 KA , adjustable thermal and fixed magnetic type, ics=100%icu 'C' series complete all as specified and directed.
22
-
-
... More
S&F MCB SPN 32 Amp, 240 volts with breaking capacity 10 KA , adjustable thermal and fixed magnetic type, ics=100%icu 'C' series complete all as specified and directed.
83
-
-
... More
S&F MCB SPN 20 Amp, 240 volts with breaking capacity 10 KA , adjustable thermal and fixed magnetic type, ics=100%icu 'C' series complete all as specified and directed.
38
-
-
... More
S&F MCB SPN 10 Amp, 240 volts with breaking capacity 10 KA , adjustable thermal and fixed magnetic type, ics=100%icu 'C' series complete all as specified and directed.
6
-
-
... More
S&F MCB SP 63 Amps, 240 volts with breaking capacity 10 KA , adjustable thermal and fixed magnetic type, ics=100%icu 'C' series complete all as specified and directed.
4
-
-
... More
S&F MCB SP 40 Amps, 240 volts with breaking capacity 10 KA , adjustable thermal and fixed magnetic type, ics=100%icu 'C' series complete all as specified and directed.
22
-
-
... More
S&F MCB SP 6-32 Amps, 240 volts with breaking capacity 10 KA , adjustable thermal and fixed magnetic type, ics=100%icu 'C' series complete all as specified and directed.
1262
-
-
... More
M&L for 32 mm dia PVC conduit and conduit accessories, concealed in walls complete all as specified and directed
700
-
-
... More
S&F Modular Telephone RJ 11 Socket , 1 module in a concealed flush box in wall including connected items complete all as specified and as directed.
40
-
-
... More
S&F Modular LAN RJ 45 Socket , 1 module in a concealed flush box including connected items complete all as specified and as directed.
36
-
-
... More
S&F Timelite DB including 32 Amps 3 pole MCB, ML2 power contactor and programable digital time switch suitable for street light control all as speciefied and directed. NOTE- Make of DB, MCB power contactor and time switch should be same.
6
-
-
... More
M & L for flame proof 3 way lighting junctionbox in cast aluminium alloy LM-6 material size 3/4 “ ET 125 mm x75 mm dia, with terminals/connectors 6 Nos, 4 sq terminals with flanged cover earthlings external2 Nos, and internal-2 Nos 3/4” ET entry, hardware in stainless steel with anti corrosive epoxy powder coated with protection IP-65 equipment standard as per IS-2148/81, alongwith along with cable glands double compression flame proof heavy duty suitable for gas group I/IIA/IIB/IIC approved by CCE and certified by CMRI complete all as specified and directed by Engineers in charge. Note:- The rate quoted to be inclusive of brackets made of MS steel of suitable size for the above fittings.
3
-
-
... More
S & F flame proof fitting with retrofit luminarie of capacity 2 x 20 W LED lamp CMRI certified suitable for industrial lightning with IP 65 protection with heat resistant toughned glass complete including connection to junction box complete all as specified and directed. NOTE:- Supplying and fixing of necessary bracket for fixing above fittings shall be deemed to be included in quoted Rate.
32
-
-
... More
S&F flame proof Exhaust fan made out of metal body, AC single phase 230V, 300 mm sweep CMRI Certified complete suitable connection from ceiling rose all as specified and as directed.
3
-
-
... More
S&F flame proof flexible hose pipe, 500 mm length suitable for connection CMRI Certified complete all as specified and as directed.
35
-
-
... More
M & L flame proof distribution board SPN 8 way (totally enclosed dust and flame proof/jet pro of(IP-65 protection) including flame proof MCB SPN 20A-01 Nos, MCB SP 5-30A-06 Nos 240/440 volts AC 10KA suitable) for gas group I/IIA/IIB/IIC as per IS 2148 OF 1981 having degree of protection IP-55 as IS power coating having provision for one number of internal and two number of external screws for earthing also having O ring neoprene rubber gasket, hardware in external steel construction having two Nos ET 1 to 1/4 ET outgoing cable entry from bottom suitable for 200 amp aluminium bus bar type and 12 Nos 2.5/4 sqmm clip on type all as specified and certified flame proof by CMRI. NOTE:- supplying and fixing of necessary bracket for fixing above DB shall be deemed to be included in quoted Rate.
1
-
-
... More
M & L flame proof distribution board SPN 4 way (totally enclosed dust and flame proof/jet pro of(IP-65 protection) including flame proof MCB SPN 20A-01 Nos, MCB SP 5-30A-02 Nos 240/440 volts AC 10KA suitable) for gas group I/IIA/IIB/IIC as per IS 2148 OF 1981 having degree of protection IP-55 as IS power coating having provision for one number of internal and two number of external screws for earthing also having O ring neoprene rubber gasket, hardware in external steel construction having two Nos ET 1 to 1/4 ET outgoing cable entry from bottom suitable for 200 amp aluminium bus bar type and 12 Nos 2.5/4 sqmm clip on type all as specified and certified flame proof by CMRI. NOTE:- supplying and fixing of necessary bracket for fixing above DB shall be deemed to be included in quoted Rate.
1
-
-
... More
M & L for Flame proof switch socket and plug combined in LM-6 415 volt, 50 Hz ,16Amps, 2P+ earth phase certified as flame proof by CMRI Dhanbad suitable for gas group I/IIA/IIB/IIC as per IS-2148 of 1981, degree of protection IP-65 as per IS 2147/81, cable entry top and bottom 3/4” light gray in LM-6 construction complete all as specified and directed. Note:- The rate quoted to be inclusive of brackets made of MS steel of suitable size for the above fittings.
3
-
-
... More
EXTERNAL WATER SUPPLY WORKS NOTE:- For items of EXTERNAL WATER SUPPLY WORKS notes given at the beginning of Sch ‘A’ Part-IV (EXTERNAL WATER SUPPLY WORKS) shall also be applicable.
-
-
-
... More
Supply, laying and testing of Ductile iron pipe (Conforming to IS: 8329-2000), Centrifugally Cast (Spun) Pressure Pipe with Socket and Spigot ends suitable for Push-on-Joint incl jointing material, duly applied with Zinc Coating with finishing layer of Bitumen on external surfaces and Cement Mortar Lining with Bituminous Seal Coat on internal surfaces complete of size 150 mm bore class K-9 laid in trenches complete all as specified and directed .
550
-
-
... More
Supply & Installation testing and commissoning of monoblock centrifugal pump driven by induction motor of suitable capacity , Head 24 to 44 Mtr . capacity of 20 HP with following parameters:- 3000 RPM, 415 Volt, 3PH, 50Hz Discharge capacity 3200-1800 LPM, Bronze impeller , Motor body - Cast Iron,Stuffing Box seal Gland packed and base Frame of MS Febricated Type of Product- Non-self priming monoblock Pump complete all as specified and directed .
2
-
-
... More
Supply and fix Foot Valve conforming to IS 4038, 100 mm (4”) dia complete all as specified and directed
2
-
-
... More
Supply, installation, testing and commissioning of indoor type cubicle panel board, 3 phase, 4 wire, 415 V, 50 Hz, factory fabricated with 2.0mm thick CRCA sheet duly compartmentalized for each control gear, lockable/openable by keys, pretreated using seven tank process followed by powder coat painting of approved shade, provided with suitable gasket to make it dust/ vermin proof and IP-43 degree of protection. The panel shall be of suitable size including provision of following switch gears and control gear- (Pump House LT Panel)
(a) Main bus bar: TPN Aluminium bus bar 200 A - 01 Set
(b) Incomer: (i) MCCB, 63 A, 25 KA, 4 Pole - 01 No.
(c) Outgoing: (i) Motor Protection Circuit Breaker (MPCB), rotary type, 32 Amps, 3 Pole, 50 KA, with short circuit & overload protection along with Fully Automatic Star Delta (FASD) starter suitable for up to 20 HP 3 ph, 415 V, 50 HZ, AC motor along with LED pilot light indication lamps to indicate motor ON & OFF position - 02 Sets (ii) MCB SPN 32 Amps, 10 KA, 'C' curve - 03 Nos.
(iii) Digital Voltmeter with Selector switch - 01 Set.
(iv) Digital Ammeter with selector switch & CT's - 01 Set
(v) LED indication lamp R,Y,B - 01 Set of 03
1
-
-
... More
Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 4.0 sq mm, 3 core, 1100 Volts grade complete all as specified and directed .
30
-
-
... More
Supply, laying and testing of Ductile iron pipe (Conforming to IS: 8329-2000), Centrifugally Cast (Spun) Pressure Pipe with Socket and Spigot ends suitable for Push-on-Joint incl jointing material, duly applied with Zinc Coating with finishing layer of Bitumen on external surfaces and Cement Mortar Lining with Bituminous Seal Coat on internal surfaces complete of size 200mm bore class K-9 laid in trenches complete all as specified and directed .
50
-
-
... More
Supply, laying and testing of Ductile iron pipe (Conforming to IS: 8329-2000), Centrifugally Cast (Spun) Pressure Pipe with Socket and Spigot ends suitable for Push-on-Joint incl jointing material, duly applied with Zinc Coating with finishing layer of Bitumen on external surfaces and Cement mortar Lining with Bituminous Seal Coat on internal surfaces complete of size 100 mm bore class K-9 laid in trenches complete all as specified and directed .
1931
-
-
... More
M&L DI fittings /DI bend any type, radius and angles, tappers and type (straight, bend, increasing, decreasing, or double socket etc. Tee pipes single branch Y junction, double branch cross (all socket, socket and Spigot or flanged ends) collors, caps and plugs for the Pipes socket and Spigot for upto 200 mm bore pipe complete all as specified and directed .
610
-
-
... More
M&L DI fittings /DI bend any type, radius and angles, tappers and type (straight, bend, increasing, decreasing, or double socket etc. Tee pipes single branch Y junction, double branch cross (all socket, socket and Spigot or flanged ends) collors, caps and plugs for the Pipes socket and Spigot for 200mm but not exc. 300 mm bore pipe complete all as specified and directed .
200
-
-
... More
Construction of stone masonry valve pit for Sluice valve all as specified and as per directed by Engr-in-Charge including plastering, PCC in foundation, Excavation and earth work in any type of soil, MS sheet cover 3mm thick sheet with locking arrangement painted with two coat of anti corossive paint over one coats of red oxide primer of size 900x900x900mm (type 'A') as shown in Drg No. complete all as specified and directed .
1
-
-
... More
Construction of stone masonry valve pit for Sluice valve all as specified and as per directed by Engr-in-Charge including plastering, PCC in foundation, Excavation and earth work in any type of soil, MS sheet cover 3mm thick sheet with locking arrangement painted with two coat of anti corossive paint over one coats of red oxide primer of size 900x900x600 (type 'B') as shown in Drg No. complete all as specified and directed ..
3
-
-
... More
Construction of stone masonry valve pit for Sluice valve all as specified and as per directed by Engr-in-Charge including plastering, PCC in foundation, Excavation and earth work in any type of soil, MS sheet cover 3mm thick sheet with locking arrangement painted with two coat of anti corossive paint over one coats of red oxide primer of size 450x450x600 (type 'C') as shown in Drg No. complete all as specified and directed .
5
-
-
... More
EXTERNAL ELETRIC SUPPLY AND DG SET WORKS NOTE:- For items of EXTERNAL ELECTRIC SUPPLY notes given at the beginning of Sch ‘A’ Part-V (EXTERNAL ELETRIC SUPPLY) shall also be applicable.
-
-
-
... More
Supply, installation, testing and commissioning of step down transformer out door type suitable for plinth mounting complete with standard accessories/fittings suitable for HT 11KV 3 Phase and LT 433 volts 3 phase 4 wire , Dyn-11, copper wound, with off load tap changer having voltage variation of ±7.5% in step of 2.5 % continuous rating of capacity 500 KVA with temperature rise shall not exceed 45° C for transformer winding and 40° C for top oil complete conforming to IS 1180 (Part 1) : 2014 Energy Efficiency Level - 2 for transformer including necessary suitable size PCC plateform and comprising of following fittings :-
(a) Two earthing terminals for body earthing and two additional for neutral brought out on a bushing.
(b) Lifting lugs/hooks . (c) Rating and terminal marking plate.
(d) Silica gel breather .
(e) Drain - cum - sampling valve (3/4)" nominal thread with plug (f)Thermometer pocket with dial type thermometer.
(g) Oil filling inlet pipe with plug.
(h) Conservator with oil level gauge.
(j) First fill of oil up to appropriate level as recommended by manufacturer with fresh new oil. (k) Type of connection arrangement : MS cable termination box on LT side and open bushing on HT side. NOTE :- Plinth stone masonry platform as per manufacturer recommendations complete with standard fittings conforming to IS-1180 energy efficient and with ECBC Closset or latest IS complete all as specified and as directed. (Note:-Stone masonary platform will be measured and paid separately)
2
-
-
... More
Supply, installation, testing and commissioning of outdoor type cubicle panel board with tapered top, 3 phase, 4 wire, 415 V, 50 Hz, factory fabricated with 3.0mm thick for outer shell and 2.0mm thick for inside CRCA sheet duly compartmentalized for each control gear, front and rear openable system lockable/openable by keys from both sides, pretreated using seven tank process followed by powder coat painting of approved shade, provided with suitable gasket to make it dust/ vermin proof and IP-65 degree of protection. The size of panel shall be suitable for accommodating and provision of following switch gears and control gear- (Main LT Panel 'A' : Near Transformer)
(a) Main bus bar: TPN Copper bus bar, 1200Amps - 01 Set
(b) Incomer: (i) ACB, 800 A,4 Pole , 415 Volt - 01 No.
(ii) Digital Voltmeter with Selector switch - 01 Set.
(iii) Digital Ammeter with selector switch & CT's - 01 Set
(iv) LED indication lamp R,Y,B - 01 Set of 03
(c) Outgoing: (i) MCCB, 400 A, 36 KA, 3 Pole - 01 No
(ii) MCCB, 160 A, 25 KA, 3 Pole - 04 No (iii) MCCB, 63 A, 16 KA, 3 Pole - 04 No. (v) 4 pole contactor, 63 Amps - 01 No.
(vi) MCB TP, 32A, 10 KA - 01 Nos.
(vii) Astronomical time switch - 01 No
(viii) Auto/Manual selector Switch - 01 No.
(ix) Terminal block 3 Ph, 4 wire for incoming & outgoing - 01 set
1
-
-
... More
Supply, installation, testing and commissioning of outdoor type cubicle panel board, 3 phase, 4 wire, 415 V, 50 Hz, factory fabricated with 3.0mm thick for outer shell and 2.0mm thick for inside CRCA sheet duly compartmentalized for each control gear, front and rear openable system lockable/openable by keys from both sides, pretreated using seven tank process followed by powder coat painting of approved shade, provided with suitable gasket to make it dust/ vermin proof and IP-54 degree of protection. The size of panel shall be suitable for accommodating and provision of following switch gears and control gear- (LT Panel No. A1: Near OTM Accn)
(a) Main bus bar: TPN Aluminium bus bar 600 Amps - 01 Set
(b) Incomer: (i) MCCB, 400 A, 36 KA, 4 Pole - 01 No.
(ii) Digital Voltmeter with Selector switch - 01 Set.
(iii) Digital Ammeter with selector switch & CT's - 01 Set
(iv) LED indication lamp R,Y,B - 01 Set of 03
(c) Outgoing: (i) MCCB, 200 A, 25 KA, 3 Pole - 03 No. (iii) MCCB, 63 A, 16 KA, 3 Pole - 03 No
(iii) MCB, 32 A, 10 KA, TP - 01 Nos. (Iv) 4 pole contactor, 63 Amps - 01 No.
(v) Astronomical time switch - 01 No.
(viii) Auto/Manual selector Switch - 01 No.
(ix) Terminal block 3 Ph, 4 wire for incoming & outgoing - 01 set
1
-
-
... More
Supply, installation, testing and commissioning of outdoor type cubicle panel board, 3 phase, 4 wire, 415 V, 50 Hz, factory fabricated with 3.0mm thick for outer shell and 2.0mm thick for inside CRCA sheet duly compartmentalized for each control gear, front and rear openable system lockable/openable by keys from both sides, pretreated using seven tank process followed by powder coat painting of approved shade, provided with suitable gasket to make it dust/ vermin proof and IP-54 degree of protection. The size of panel shall be suitable for accommodating and provision of following switch gears and control gear- (LT Panel No. A2: Near ORs Cook House)
(a) Main bus bar: TPN Aluminium bus bar, 300 Amps - 01 Set
(b) Incomer: (i) MCCB, 160 A, 25 KA, 4 Pole - 01 No.
(ii) Digital Voltmeter with Selector switch - 01 Set.
(iii) Digital Ammeter with selector switch & CT's - 01 Set
(iv) LED indication lamp R,Y,B - 01 Set of 03
(c) Outgoing: (i) MCCB, 125 A, 25 KA, 3 Pole - 02 No.
(ii) MCB, 32 A, 16KA, TP- 02 Nos
(iii) 4 pole contactor, 63 Amps - 02 No.
(iv) MCB SP, 6-32A, 10 KA - 02 Nos.
(v) Astronomical time switch - 02 No.
(vi) Auto/Manual selector Switch - 02 No.
(vii) Terminal block 3 Ph, 4 wire for incoming & outgoing - 02 set
1
-
-
... More
Supply, installation, testing and commissioning of outdoor type cubicle panel board, 3 phase, 4 wire, 415 V, 50 Hz, factory fabricated with 3.0mm thick for outer shell and 2.0mm thick for inside CRCA sheet duly compartmentalized for each control gear, front and rear openable system lockable/openable by keys from both sides, pretreated using seven tank process followed by powder coat painting of approved shade, provided with suitable gasket to make it dust/ vermin proof and IP-54 degree of protection. The size of panel shall be suitable for accommodating and provision of following switch gears and control gear- (LT Panel No. A3: Near Adm Block)
(a) Main bus bar: TPN Aluminium bus bar, 300 Amps - 01 Set
(b) Incomer: (i) MCCB, 160 A, 25 KA, 4 Pole - 01 No.
(ii) Digital Voltmeter with Selector switch - 01 Set.
(iii) Digital Ammeter with selector switch & CT's - 01 Set
(iv) LED indication lamp R,Y,B - 01 Set of 03
(c) Outgoing: (i) MCCB, 125 A, 25 KA, 3 Pole - 01 No
(ii) MCCB, 63 A, 16 KA, 3 Pole - 04 Nos
(iii) MCB 32 A, 10KA, SPN - 06 No (iv) 4 pole contactor, 63 Amps - 01 No.
(v) MCB SP, 6-32A, 10 KA - 02 Nos.
(vi) Astronomical time switch - 01 No.
(vii) Auto/Manual selector Switch - 01 No.
(viii) Terminal block 3 Ph, 4 wire for incoming & outgoing - 01 set
1
-
-
... More
Supply, installation, testing and commissioning of outdoor type cubicle panel board, 3 phase, 4 wire, 415 V, 50 Hz, factory fabricated with 3.0mm thick for outer shell and 2.0mm thick for inside CRCA sheet duly compartmentalized for each control gear, front and rear openable system lockable/openable by keys from both sides, pretreated using seven tank process followed by powder coat painting of approved shade, provided with suitable gasket to make it dust/ vermin proof and IP-54 degree of protection. The size of panel shall be suitable for accommodating and provision of following switch gears and control gear- (LT Panel No. A4 : Near Offrs Mess)
(a) Main bus bar: TPN Aluminium bus bar 200 Amps - 01 Set
(b) Incomer: (i) MCCB, 125 A, 25 KA, 4 Pole - 01 No.
(ii) Digital Voltmeter with Selector switch - 01 Set.
(iii) Digital Ammeter with selector switch & CT's - 01 Set
(iv) LED indication lamp R,Y,B - 01 Set of 03
(c) Outgoing: (i) MCCB, 100 A, 25 KA, 3 Pole - 01 No
(ii) MCCB, 63 A, 16 KA, 3 Pole - 03 No.
(iii) MCB, 32 A, 10 KA, SPN - 01 No's .
(v) 4 pole contactor, 63 Amps - 01 No.
(vi) Astronomical time switch - 01 No.
(vii) Auto/Manual selector Switch - 01 No.
(viii) Terminal block 3 Ph, 4 wire for incoming & outgoing - 01 set
1
-
-
... More
Supply, installation, testing and commissioning of outdoor type cubicle panel board, 3 phase, 4 wire, 415 V, 50 Hz, factory fabricated with 3.0mm thick for outer shell and 2.0mm thick for inside CRCA sheet duly compartmentalized for each control gear, front and rear openable system lockable/openable by keys from both sides, pretreated using seven tank process followed by powder coat painting of approved shade, provided with suitable gasket to make it dust/ vermin proof and IP-54 degree of protection. The size of panel shall be suitable for accommodating and provision of following switch gears and control gear- ( PANEL B)
(a) Main bus bar: TPN Copper bus bar 1200 Amps - 01 Set
(b) Incomer: (i) ACB, 800 A, 4 Pole , 415 Volt - 01 No.
(ii) Digital Voltmeter with Selector switch - 01 Set.
(iii) Digital Ammeter with selector switch & CT's - 01 Set
(iv) LED indication lamp R,Y,B - 01 Set of 03
(c) Outgoing: (i) MCCB, 400 A, 36 KA, 3 Pole - 01 Nos.
(ii) MCCB, 250 A, 36 KA, 3 Pole - 01 Nos.
(ii) MCCB, 100 A, 16 KA, 3 Pole - 02 No
(iii) MCCB, 63 A, 16 KA, 3 Pole - 02 Nos.
(iv) MCB TP 32 A . 10 KA -01 Nos
(v) 4 pole contactor, 63 Amps - 01 No.
(vi) MCB SP, 6-32A, 10 KA - 02 Nos.
(vii) Astronomical time switch - 01 No.
(viii) Auto/Manual selector Switch - 01 No.
(ix) Terminal block 3 Ph, 4 wire for incoming & outgoing - 01 set
1
-
-
... More
Supply, installation, testing and commissioning of outdoor type cubicle panel board, 3 phase, 4 wire, 415 V, 50 Hz, factory fabricated with 3.0mm thick for outer shell and 2.0mm thick for inside CRCA sheet duly compartmentalized for each control gear, front and rear openable system lockable/openable by keys from both sides, pretreated using seven tank process followed by powder coat painting of approved shade, provided with suitable gasket to make it dust/ vermin proof and IP-54 degree of protection. The size of panel shall be suitable for accommodating and provision of following switch gears and control gear- (LT Panel No. B1: Near Storage Accn)
(a) Main bus bar: TPN Aluminium bus bar 400 Amps - 01 Set
(b) Incomer: (i) MCCB, 200 A, 36 KA, 4 Pole - 01 No.
(ii) Digital Voltmeter with Selector switch - 01 Set.
(iii) Digital Ammeter with selector switch & CT's - 01 Set
(iv) LED indication lamp R,Y,B - 01 Set of 03
(c) Outgoing: (i) MCCB, 63 A, 16 KA, 3 Pole - 07 Nos.
(ii) MCB , 32 A, 'C' Curved, SP 10 KA - 02
(iii) MCB TP 32 A , 10 KA - 01 Nos
(iv) 4 pole contactor, 63 Amps - 01 No.
(v) MCB SP, 6-32A, 10 KA - 02 Nos.
(vi) Astronomical time switch - 01 No.
(vii) Auto/Manual selector Switch - 01 No.
(viii) Terminal block 3 Ph, 4 wire for incoming & outgoing - 01 set
1
-
-
... More
Supply, installation, testing and commissioning of outdoor type cubicle panel board, 3 phase, 4 wire, 415 V, 50 Hz, factory fabricated with 3.0mm thick for outer shell and 2.0mm thick for inside CRCA sheet duly compartmentalized for each control gear, front and rear openable system lockable/openable by keys from both sides, pretreated using seven tank process followed by powder coat painting of approved shade, provided with suitable gasket to make it dust/ vermin proof and IP-54 degree of protection. The size of panel shall be suitable for accommodating and provision of following switch gears and control gear- (LT Panel No. B2: Near 'A' Veh area)
(a) Main bus bar: TPN Aluminium bus bar 600 Amps - 01 Set
(b) Incomer: (i) MCCB, 400 A, 36 KA, 4 Pole - 01 No.
(ii) Digital Voltmeter with Selector switch - 01 Set.
(iii) Digital Ammeter with selector switch & CT's - 01 Set
(iv) LED indication lamp R,Y,B - 01 Set of 03
(c) Outgoing: (i) MCCB, 100 A, 16 KA, 3 Pole - 04 Nos (ii) MCB TP 32 A, 10KA - 01 Nos (iii) 4 pole contactor, 63 Amps - 01 No.
(iv) MCB SP, 6-32A, 10 KA - 02 Nos.
(v) Astronomical time switch - 01 No.
(vi) Auto/Manual selector Switch - 01 No.
(vii) Terminal block 3 Ph, 4 wire for incoming & outgoing - 01 set
1
-
-
... More
Supply, installation, testing and commissioning of outdoor type cubicle panel board, 3 phase, 4 wire, 415 V, 50 Hz, factory fabricated with 3.0mm thick for outer shell and 2.0mm thick for inside CRCA sheet duly compartmentalized for each control gear, front and rear openable system lockable/openable by keys from both sides, pretreated using seven tank process followed by powder coat painting of approved shade, provided with suitable gasket to make it dust/ vermin proof and IP-54 degree of protection. The size of panel shall be suitable for accommodating and provision of following switch gears and control gear- (LT Panel No. B3: Near Religious Institute)
(a) Main bus bar: TPN Aluminium bus bar 200 Amps - 01 Set
(b) Incomer: (i) MCCB, 100 A, 25 KA, 4 Pole - 01 No.
(ii) Digital Voltmeter with Selector switch - 01 Set.
(iii) Digital Ammeter with selector switch & CT's - 01 Set
(iv) LED indication lamp R,Y,B - 01 Set of 03
(c) Outgoing: (i) MCCB, 63 A, 16 KA, 3 Pole - 04 Nos (ii) MCB, 6-32 A, 10KA, SPN - 05 Nos (iii) MCB TP 32 A , 10 KA -01 Nos
(iii) 4 pole contactor, 63 Amps - 01 No.
(iv) MCB SP, 6-32A, 10 KA - 02 Nos.
(v) Astronomical time switch - 01 No.
(vi) Auto/Manual selector Switch - 01 No.
(vii) Terminal block 3 Ph, 4 wire for incoming & outgoing - 01 set
1
-
-
... More
Supply, installation, testing and commissioning of outdoor type cubicle panel board, 3 phase, 4 wire, 415 V, 50 Hz, factory fabricated with 3.0mm thick for outer shell and 2.0mm thick for inside CRCA sheet duly compartmentalized for each control gear, front and rear openable system lockable/openable by keys from both sides, pretreated using seven tank process followed by powder coat painting of approved shade, provided with suitable gasket to make it dust/ vermin proof and IP-54 degree of protection. The size of panel shall be suitable for accommodating and provision of following switch gears and control gear- (LT Panel No. B4: Near Family welfare centre)
(a) Main bus bar: TPN Aluminium bus bar 200 Amps - 01 Set
(b) Incomer: (i) MCCB, 63 A, 25KA, 4 Pole - 01 No.
(ii) Digital Voltmeter with Selector switch - 01 Set.
(iii) Digital Ammeter with selector switch & CT's - 01 Set
(iv) LED indication lamp R,Y,B - 01 Set of 03
(c) Outgoing: (i) MCCB, 63 A, 16 KA, 4 Pole - 02 Nos (ii) MCB, 32 A, 10KA, SPN - 04 Nos (iii) MCB TP 32 A , 10 KA - 01 Nos
(iii) 4 pole contactor, 63 Amps - 01 No.
(iv) MCB SP, 6-32A, 10 KA - 02 Nos.
(v) Astronomical time switch - 01 No.
(vi) Auto/Manual selector Switch - 01 No.
(vii) Terminal block 3 Ph, 4 wire for incoming & outgoing - 01 set
1
-
-
... More
Supply and erection of Hot dip galvanized tapered octagonal pole of height 7.0 mtrs in single section having top dia 70mm and bottom dia 130mm made up of 3mm thick sheet and welded with a base plate of size 200mm x 200mm x 12mm thick and provided with 1000mm long single arm bracket of 32/40 mm dia made up of GI pipe light grade (suitable for street light) 15 degree of angle for mounting street light fitting complete with provision of 04 Nos of ‘J’ type foundation bolts of size not less than 20mm dia, 600mm long embedded in PCC foundation concrete as per manufacturer’s recommendation including necessary earth work, RFR etc complete.
100
-
-
... More
Design, supplying, installing, testing and commissioning of 150 KVAR Automatic Power factor Corrector (APFC) Panel of approx. size of 1800 X1100 X500mm factory made, cubical compartmentalized for each stage, outdoor type, IP 54 degree Protection, dust, vermin and weather proof, made out of CRCA MS Sheet of 3.15mm thickness, front openable with locking arrangement, fixed on 50x50x6mm angle iron 4 leg frame structure having 40cm ground clearance, duly grouted in P:C:C (1:2:4) complete panel powder coated with seven tank process from inside and outside, duly prewired with suitable size FRLS PVC insulated multistranded copper conductor wire for capacitor stages, metering & control accessories, earthing straps for connecting earth strips, cable entry from bottom and comprising the following:- (Contd...)
2
-
-
... More
(a) Bus Bar system- Aluminium bus bars of size 30X10mm for phases and 30 x 5mm for neutral duly provided with colour coded heat shrinkable PVC sleeves.
(b) Incomer – MCCB 160 Amp, 4 pole, 36 KA, ICS= 100% ICU, with adjustable thermal magnetic setting alongwith spreader terminals and rotary handle -01 No.
(c) MCB, TP 63 Amp, D Series, 415 volts-02 Nos
(d) MCB, TP 40 Amp, D Series, 415 volts-02 Nos
(e) MCB, TP 20 Amp, D Series, 415 Volts-01 No.
(f) MPP Capacitor, resin filled, heavy duty type for 3 phase 440 Volts & 50 HZ system of 50 KVAR capacity-02 Nos
(g) MPP Capacitor, resin filled, heavy duty type for 3 phase 440 volt & 50HZ system of 25 KVAR capacity-01No
(h) MPP Capacitor, resin filled, heavy duty type for 3 phase 440 volt & 50HZ system of 15 KVAR capacity-01No
MPP Capacitor, resin filled, heavy duty type for 3 phase 440 volt & 50 HZ system of 10 KVAR capacity-01No
(k) Capacitive duty contactor suitable for 50 KVAR Heavy duty Capacitor -02 Nos
(l) Capacitive duty contactor suitable for 25 KVAR Heavy duty Capacitor -01 No
(m) Capacitive duty contactor suitable for 15 KVAR Heavy duty Capacitor -01 No
(n) Capacitive duty contactor suitable for 10 KVAR Heavy duty Capacitor -01 No
prewired with suitable size copper wire- 01 No (Contd...)
-
-
-
... More
(o) 04- Stage Automatic power factor Correction relay- 01 No
(p) Digital volt meter 0 to 500 volt of size 96mmx96mm with inbuilt selector switch duly (q) Digital Amp meter 0 to 200 Amp of size 96mmx96mm with inbuilt selector switch and CTR duly prewired with suitable size copper wire- 01 No
(r) Indicator lamp indicating Cycle on with Amber sheds LED type -06 Nos
(s) Space Heater, 60 Watt, 230 volt Ac alongwith toggle switch- 01 Set
(u) ventilating fans of 6” sweep size alongwith filter & Thermostat switch, to dissipate the heat liberated by capacitor units complete with automatic switching ON and OFF of fan depending upon the temperature of the panel, suitable for 230 Volt, 50 HZ Ac -01 No. Note:- 1. The drawing for APFC panel shall be approved by GE before placement of order.
2. Any kind of brick work, PCC, Plastering etc as required during execution of work, is included in quoted rate and no extra cost will be paid in this effect.
-
-
-
... More
Supply and fix LED Step Bollard Light having step profile placed on top. Ideal for architectural outdoor lighting, typically giving off light from the sides, suitable to illuminate walkways, steps or pathway with rated power 10W cat ref LLSBL-10-W-B or eqivalent complete all as specified and directed by Engr-in-Charge.
10
-
-
... More
M&L for cutting of existing road / hard standing up to 15 cm depth for laying of pipe lines and making good the disturbed surfaces by providing PCC 1:2:4 type B-1 (using 20mm graded aggregate) after laying of pipes lines / cables and returning filling of soil, complete all as specified and directed. Note:- Excavation and earth work below road / hard standing will be measured and paid under relevant items.
5
-
-
... More
Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed.
4652
-
-
... More
Supply , Installation , testing and commissioning of Ecco Friendly , silent generating set Diesel Engine driven 40 KVA / 32KW at 0.8 power factor or nearest higher size , 415 volts AC , 3 Phase 50 Hz , 4 wire directly coupled alternator and Engine water cooled common base platform with in built fuel tank and including all excavation PCC foundation , anti vibration pads / dampers as per manufacturer instructions and as directed by manufacturer. The DG set shall be factory assembled by the OEM of the engine manufacturer and all components shall be accommodated in enclosure and other accessories comprising of the following:- (Contd...)
1
-
-
... More
Diesel Engine : Eco friendly for emmission and noice (CPCB NORMS-II COMPLIENCE ) Diesel Engine confirming to BS/IS standard devoloping suitable BHP @ the alternator of capacity 40 KVA/32 KW developing required power for rated KVA not less than 32 KW at 1500 RPM, 4 cylinders in-line, 4 stroke, radiator cooled, continuous duty with 10% overload capacity for any one hour in 12 hours of continuous running and consisting of following:-
a) Radiator cooled
b) Electrical Starter Motor 12 V DC.
c) 12 V battery, 90 AH rating with connecting leads and terminals
d) Battery Charging Alternator
e) Fuel System with electronic governor f) Full flow Spin-on lube oil filter
g) Duel fuel filter with water separator
h) Residential type silencer
j) Dry type air cleaner
k) Fly wheel and fly wheel housing
l) First fill of lube oil & Coolant (Contd...)
-
-
-
... More
Alternator : The Alternator shall be of capacity 40 KVA/ 32 KW, 415 Volts, at 0.8 pf(lag), 50 Hz, 3 phase, 4 wire system, suitable for operation at 1500 RPM. The Alternator shall be brushless type, screen protected, revolving field, self excited, self regulated through an AVR, copper wound, Class 'H' insulation, having ±1.0% voltage regulation (max) in static conditions and continuous duty operation. (Contd...)
-
-
-
... More
Mounting Arrangement: Engine and Alternator shall be mounted on a common MS fabricated base frame with Anti Vibration Mounting Pads. Base frame made out off suitable channel mounted on AVM pads as recommended by manufacture. Fuel tank of suitable capacity for contineous 8 Hrs of operation including all connection etc Provn of DG set foundation as recommended by manufacturer Accoustic enclosure meeting stringer MOEF/CPCB norms-II of 75 dBA @ 1 mtr at 75% load under free field condition with air inlet louvers poweder coated. Use of stainless steel hard ware and insulating materials shall meeting IS 8183 insulating materiala. Acoustic enclosure shall be as per manufacturer design. (Contd...)
-
-
-
... More
Fuel Tank: Integral fuel tank shall be of capacity not less than 810 Liters and provided with drain plug, air vent, inlet and outlet connection, level indicator and provision for cleaning. (Contd...)
-
-
-
... More
AMF Panel: AMF Panel of the DG set can be located inside the acoustic enclosure or outside the acoustic enclosure as per manufacturer's standard. The AMF panel shall be totally enclosed, dust, damp and vermin proof, cubicle type free standing floor mounted type made out of 1.6mm/2.0mm thick CRCA sheet for the panel located inside the acoustic enclosure. If the AMF panel has to be located outside the acoustic enclosure, the outer shell of the panel should be made out of 3mm thick CRCA sheet and provided with a canopy and the degree of protection shall be IP 54. The AMF Panel should be equipped with the following control gear and components:-
a) Power contactor-3/4 pole of suitable current rating with thermal overload relay - 02 Nos (for alternator and mains)
b) MCB / HRC fuse of suitable current rating for short circuit protection
c) Microprocessor based AMF module incorporating functions:- - Supply failure timer - Restoration timer - 3 Impulse automatic engine start/ stop logic - Mains/ Generator Voltage & Frequency sensing
d) Aluminium bus bars of suitable capacity with incoming/ outgoing terminals
e) Instrument fuses duly wired and ferruled
f) MCCB of suitable rating 3/4 pole with overload and short circuit protections - 02 No's (for alternator & mains)
g) Current Transformers of suitable rating
h) Microprocessor based generator set monitoring and control system with LCD display integrated with all Features, Functions and Protections of Engine and Alternator provided with separate LED indication lamps for each.
i) Auto/Manual selector provision (Contd...)
-
-
-
... More
Note :- (i) PCC foundation for DG set as per manufacturer's recommendations shall be measured and paid separately under relevant items of Schedule 'A'.
(ii) On successful installation, the DG set shall be subjected to load test as specified below :-
Phase-I : No-load test for 01 hour in the presence of Engineer-in-Charge.
Phase-II : Load test for 12 hours continuously (at 25% of full load for fist one hour, 50% of full load for second one hour, 75% of full load for third one hour, 100% load for next 08 hours and 110% of full load for last one hour). Resistive type load bank or Water Load, Fuel and testing instruments as required for load testing shall be arranged by the contractor and cost of the same shall deemed to be included in the quoted rate.
(iii) Phase-II load test shall be carried out in the presence of testing officer nominated by accepting officer or IEM.
-
-
-
... More
Design, Supply, install, testing and commissioning of grid connected roof top solar generation system of capacity 70 KWp AC capacity all as specified in PS and directed as per PS clause and specification as follows (FOR SINGLE LIVING ACCN):-
(A) Supply, Installation, testing and commissioning of 70 KWp SPV system comprisisng of 540/545/535 Wp solar photo voltic modules/array of high efficiency made of mono crystalline silicon solar PV cells with supply and fix of terminal box on the module having provision for opening & replacing the cable etc.as per direction of IEC. The general features of PV modules shall be as given below :- a) The module shall be made up mono crystalline silicon cells. b) The interconnected cells shall be laminated in vacuum to withstand adverse environmental conditions. c) The module frame is made of corrosion resistant materials, preferably having aluminium anodized finish.
d) The minimum clearance between the lower edge of the modules & the developed ground level shall be 300 mm.
e) Surge arresting devices to be provided at junction box and module shall be provided with bypass diode. f) The SPV module must be IEC 61215, IEC 61730 part I & part II, IEC 61701 certified from any of the accredited certifying agencies. g) Each solar PV module must be warranted by manufacturer at least 90% rated power at the end of 10 years & 80% at the end of 25 years. (Contd...)
2
-
-
... More
Note :- (i) Makes of panel provided shall be as per MNRE specification/ standard and registered in ALMM. (ii) 5% spare qty of modules shall be provided by the contractor for repair / replacement purpose. (iii) Additional module shall be provided / installed by the contractor to meet specified power output incase if the same not achived during testing and commissioning without any extra cost. (iv) Each PV module used in any solar power project must use a RF identification tag. The following information must be mentioned in the RFID used on each module:- (a) Name of the manufacturer of PV Module
(b) Name of the Manufacturer of Solar cells
(c) Month and year of the manufacture for solar cells and the module
(d) Country of origin (make in INDIA only) (e) I-Vcurve for the module
(f) Wattage, Im, Vm and FF for the module (g) Unique Serial No and Model No of the module
(h) Date and year of obtaining IEC PV module qualification certificate
(j) Name of the test lab issuing EC certificate
(k) Other relevant information on traceability of solar cells & module.
(l) Qty of PV module shall be decided as per OEM recommendation, design and layout drawing submitted to department duly approved by CWE Jhansi. (Contd...)
-
-
-
... More
(B) Module Mounting Structure (MMS)
Supply & fixing of the anti-corrosive factory made Gl structure on the RCC Roof for fixing of PV modules by fixing of suitable size fastner, spring washer, nuts & bolt. The minimum thickness of galvanization & mounting steel structure shall be as per IS 47592 & IS 2061-1992 respectively withstand the wind load of 180 Km/hr. as per IS 875. The array structure shall be fixed properly using maintenance free earthing kit. Note:-
(i)The total load for roof top SPV should be less than 60 Kg/m2. (ii) The design of module mounting structure complying load withstand as per relevant IS alongwith fixing arrangement on roof shall be submitted by the contractor duly vetted from IIT/NIT/Govt Engg college for approval by CWE. (iii) The material shall be corrosion resistant and electrolyticaly compatible with material used in module frame. (iv)The fasteners should be of stainless steel and should allow easy replacement of any module. (v) The minimum clearance of the structure from the roof level
should be 300 mm.
(Contd...)
-
-
-
... More
(C) Solar DC Cables:- (i) Supply & laying of 1.1kv single core multi stranded PVC FRLSH insulated & unsheathed copper wire/ copper cable for 3 ph supply in ISI marked PVC rigid conduit pipe by saddling as per direction of IEC. (For Solar Array DC supply connection). Note : (i) The size of cable shall be as per design given by OEM & approved by vender empanelled by DISCOM.
(ii) Cable should be passes through PVC rigid pipe and pipe should be fixed properly inside cable tray for easily maintenance, is included in quoted rate (D) DC Combine box
A DC combine box shall be used to combine the DC cables of the solar module array with DC fuse protection for the outgoing DC cables to the DC distribution box.
(Contd...)
-
-
-
... More
(E) Array junction boxes
The number of junction boxes as per design given by OEM are to be provided in the PV array for termination of coinnecting cables. All wire/cables must be terminated through cable lugs. Copper busbar/terminated blocks housed in the junction box conforming to IP 65 degree of protection with EPDM rubber gasket to prevent water entry. Junction boxes shall be mounted on the MMS such that they are easily accessible and protected from direct sunlight & harsh weather. (F) On Grid Power Conditioning unit ( Inverter) Supply & installation of 415V 3-ph, 50 Hz microprocessor DSP type grid connected Inverters which converts DC energy produce by the solar array to AC energy such that it synchronizes with the existing AC power source on site. Provisioning of power manager to get all parameter details. The Inverter shall have inbuilt MPPT (Maximum Power Point Tracker) feature so as to extract maximum power from PV modules & the MPPT units environmental testing should qualify IEC 60068-2 (1,2,14,30)/ Equivalent BIS standard. (The voltage variation of +/- 10% & frequency vatiation +/-3 Hz) Note :- (i) No of inverters shall be provisioned as per design given by OEM. (ii) Inverter should have internal protection arrangements against any sustainable fault in feeder line and against the lightning on feeder. (iii) Should have isolating transformer (iv) Inverter efficiency 97% (without inbuilt galvanic isolation) and 93% (with inbuilt galvanic isolation). (v) No load losses shall be less than 1% of rated power. (vi) The above quoted rate is inclusive of MS structure stand duly fixed on roof for placing inverter.
(Contd...)
-
-
-
... More
(G) Solar meter & Net meter
As per DISCOM requirement to be provided.
(H) AC Distribution Board
(i) Supply & installation of 415V 3-ph 50Hz AC distribution board control AC power from PCU/ Inverter & provided by nacessary surge arrestors system and solar energy meter (KWH) with IP65 protection and suitable capacity MCCBs.; Qty-01 No Note: ACDB shall be covered as per OEM design in such a way that structure must sustain 180 km/hr wind speed. The cost of provn for same is inclusive in quoted rate.
(J) AC Cables
(i) Distribution wiring in 1.1kv single core multi stranded PVC FRLSH insulated & unsheathed copper wire fixed on wall on PVC batten or saddle(For AC power supply from Inverter to AC distribution board Panel).
Note :- (i) The size of cable shall be as per design given by OEM & approved by vender empanelled by DISCOM.
(K) Protection
The system shall be provided with all necessary protection like earthing, lightening & surge protection as per relevant standard.
(L) Performance testing
Ratio between the theoretical energy outputs of the SPV plant is termed as performance ratio and is measured in accordance with IEC 61724. Based on prevailing climatic and temperature conditions in India, a performance ratio of 75% is expected for crystalline modules. (Contd...)
-
-
-
... More
(M) Other Misc items
As per requirement given by OEM and approved by DISCOM to be provided. (N) Earthing As per MNRE specifications to be provided. (O) Lightening protection
As per MNRE specifications to be provided. (P) Installation, Testing & Commissioning
As per safety norms of SERC/CEA to be provided. (Q) O&M and Warranty
5 years from the date of commissioning to be provided. Note: The quoted rate deemed inclusive of the following:-
(i) Transportation charges with Transportation Insurance for the all material of on grid solar roof top system including loading & unloading at site from workshop.
(Contd...)
-
-
-
... More
(ii) Insurance for the complete system for the 5 Years.
(iii) AMC-Suraksha which include 24 site Maintenance visits, Response time 2 hrs and turn around time 48 hrs, Monthly plant performance report. (v) Guarantee and warranty of Solar panel and connected devices is to be submitted to department. (vi) The report of generated unit of solar power on monthly basis is to be submitted to department.
(iv) As per performance obligation, the contractor shall maintain minimum capacity utilization factor (CUF) of 13%. The reprot shall be submitted by the contractor to accepting officer as per guidelines promulgated by SECI. (v) Satisfactorily testing and commissioning of the system is to be done by the contractor in presence of the rep of accepting officer and the report of the complete system is submitted to department.
-
-
-
... More
All as above item no. 7.26 to 7.33 but of 15 kwp AC capacity (ONE FOR OFFCR MESS AND ONE FOR ADMIN BLOCK).
2
-
-
... More
ROAD AND HARDSTANDING WORKS
NOTE:- For items of ROAD AND HARDSTANDING WORKS notes given at the beginning of SCHEDULE 'A' PART -VI ( ROAD AND HARDSTANDING WORKS) shall also be applicable.
-
-
-
... More
M&L for thermo plastic center or edge line marking (reflective type) of 2.5mm thickness of uniform finishing with machine conforming to BS 3262 (Part-I) 1989 read with most specification of 803 clause 4.2.1 and 4.2.2 on bituminous surface in white/yellow/red colour and super imposed with glass slam beats confirming to BS 6088 and most specification 803 clause 4.3.3 including cleaning of surface by removing all dust, dirt oil grease etc inclduing removing of existing marking with spirit/ keroscene/ gas burner or mechanically on bituminous surface complete all as specified and directed.
255
-
-
... More
SEWAGE DISPOSAL WORKS
NOTE:- For items of SEWAGE DISPOSAL WORKS notes given at the beginning of SCHEDULE 'A' PART -VIII (SEWAGE DISPOSAL WORKS) shall also be applicable.
-
-
-
... More
M&L for DWCPE(SN8) 180mm(OD) /163 (ID) mm bore of pipe laid and jointed on concrete bed 150mm thick , complete including testing etc. all as specified. (Concrete bed shall be measured and paid for separately).
192
-
-
... More
M&L DWCPE(SN8) 200mm(OD) /175 (ID) mm bore of pipe laid and jointed on concrete bed 150mm thick, complete including testing etc. all as specified. (Concrete bed shall be measured and paid for separately).
192
-
-
... More
M&L DWCPE(SN8) 300mm(OD) /175 (ID) mm bore of pipe laid and jointed on concrete bed 150mm thick,, complete including testing etc. all as specified. (Concrete bed shall be measured and paid for separately).
960
-
-
... More
Construction of Septic Tank with provn of excavation, in any type of soil, foundation in PCC 1:4:8, walls of fly ash brick masonry with top cover of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCI for 50 Users complete as per TD drawing (CEBZ/TD/76/2011 Sheet No 1/2 to 2/2) complete all as spd
1
-
-
... More
Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of of size 1.2m Dia and 3m Depth as per TD drawing (CEBZ/TD/78/2011 Sheet No 1/2 to 2/2) complete all as spd
1
-
-
... More
RETAINING WALL CHAINLINK FENCING AND GATE WORKS
NOTE:- For items of RETAINING WALL CHAINLINK FENCING AND GATE WORKS notes given at the beginning of SCHEDULE 'A' PART -IX ( RETAINING WALL CHAINLINK FENCING AND GATE WORKS) shall also be applicable.
-
-
-
... More
Prov of Steel gate 8.00 m wide in double leaf, including wicket gate and RCC pillars of excavation and earth work in any type of soil, formwork, RCC(M-25) for pillar , reinforcement bars, painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer, two coats of cement base paint over 5mm thick cm (1:4) plaster over pillars based on TD Dwgs No CEBZ/TD/43/2022 complete all as specified and as directed.
1
-
-
... More
Prov of Steel gate 5.50 m wide in double leaf, including RCC (M-25) pillars, excavation and earth work in hard/dense soil, formwork, RCC (M-25 Design mix) for pillar, reinforcement bars, painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer, two coats of cement base paint over 5mm thick cm (1:4) plaster over pillars based on TD Dwgs No CEBZ/TD/43/2022 complete all as specified and as directed.
2
-
-
... More
LIGHTNING PROTECTION & CHEMICAL EARTHING WORKS
NOTE:- For items of LIGHTNING PROTECTION & CHEMICAL EARTHING WORKS notes given at the beginning of SCHEDULE 'A' PART -X ( LIGHTNING PROTECTION & CHEMICAL EARTHING WORKS) shall also be applicable.
-
-
-
... More
S&F RCC heavy duty pin type insulators with provision of fastening on roof inc. Fatsening accessories and fastened Aluminium strip with nut and bolts of suitable size as directed by Engineer in Charge
150
-
-
... More
S&F integral LED aviation light fitting comprising of aluminium housing with polycarbonate enclosure, IP65, Operating Input Voltage Range 100-270 V, AC,10 System wattage(W) @240 V complete all as specified and directed.
1
-
-
... More
S&F Analog time switch with inbuilt battery backup, 3 module size, 24 hours program, programmable every 15 minutes, backup of 100 hours, current capacity 16A with polycarbonate enclosure for wall mounting complete all as specified and directed.
1
-
-
... More
SUMMER APPLIANCES WORKS
NOTE:- For items of SUMMER APPLIANCES WORKS notes given at the beginning of SCHEDULE 'A' PART -XI ( SUMMER APPLIANCES WORKS) shall also be applicable.
-
-
-
... More
Supply and Installed of Inverter type split Air conditioner electric driven with cordless remote control unit 230V cooling capacity 4500 kcal/Hour (1.5T). BEE 5 star Rating and incl inlet/outlet copper pipe for refrigent between indoor & outdoor unit and flexible copper wire of suitable size as recomonded by manufacturer, complete all as specified and as directed. Note:1. The one split type air conditioner is comprises of one indoor and one outdoor unit only. 2. The cost of making opening for passing through inlet and outlet copper pipes and electrical cord is included in quoted rate and no extra payment will be made to contractor in this effect. 3. The rates Quoted by the contractor shall be deemed to be inclusive of cost of all elements ,concerned with T & P , labour and other misc. item , requires for executing the work . No additional claims /payment against it shall be entertained at any stage of work.
15
-
-
... More
Supply and fixing of inverter type split Air conditioner electric driven with cordless remote control unit 230V cooling capacity 6000 kcal/Hour (2TR). BEE 5 star Rating or inverter technology with and incl inlet/outlet copper pipe for refrigent between indoor & outdoor unit and flexible copper wire of suitable size as recomonded by manufacturer, complete all as directed Note:1. The one split type air conditioner is comprises of one indoor and one outdoor unit only. 2. The cost of making opening for passing through inlet and outlet copper pipes and electrical cord is included in quoted rate and no extra payment will be made to contractor in this effect. 3. The rates Quoted by the contractor shall be deemed to be inclusive of cost of all elements ,concerned with T & P , labour and other misc. item , requires for executing the work . No additional claims /payment against it shall be entertained at any stage of work.
6
-
-
... More
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA complete all as specified and as directed.
15
-
-
... More
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and as directed.
6
-
-
... More
Supply and fix refrigerator, electric driven (single phase), capacity 310 Litres.BEE 5 star rated
16
-
-
... More
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA
22
-
-
... More
Supply and fix plastic body desert cooler electric driven (single phase), having nominal air flow capacity of 5000 CuM per hour (or nearest size).
102
-
-
... More
ARBORICULTURE WORKS
NOTE:- For items of ARBORICULTURE WORKS notes given at the beginning of SCHEDULE 'A' PART -XII ( ARBORICULTURE WORKS) shall also be applicable.
-
-
-
... More
Rough dressing of, the lawn area, flower beds, planter areas, shrubbery or ground cover areas, including trenching to a depth not exc 15 cm (averaging), breaking clods flooding with water uprooting weeds from area after 10 to 15 days of its flooding including disposal of uprooted vegetation/ removal of rubbish to a distance exc 500m and n exc 1.5 Km outside the MD land complete all as specified and as directed.
3000
-
-
... More
Supply and stacking of well decomposed cattle manure at site including royality and carriage upto all lead & lift complete all as specified and as directed
52.1
-
-
... More
Supply and stacking of good earth locally available fertile soil at slte (duly selved and free from pebbles, clogs, stones etc) Including royality and carriage upto all lead & lift complete all as specified and as directed
722
-
-
... More
Excavation of pits of slze 0.90x0.90x0.90 mtrs deep removing debris,weeds/roots etc with and including supplying & earth / filling locally available fertile soil good and cattle manure mix in 4:1 ratio,adding fertilizers provision of antitermite treatment at plantation time, supplying & planting of approved species minimum of 2 to 4 feet high trees/ plants ASHOKE Trees healthy sapling with well developed root system, replacement of causalitles upto the completion of the defects liability/maint period incl disposal of dead plants at a distance exc 250m and not exc 500m as directed by Engr in charge including flooding with water, and stakes (bamboo) 1.75 m high as support to sapling etc complete all as specified and as directed.
30
-
-
... More
All a s per srl item No 13.04 above but for BOTTLE PALM trees
30
-
-
... More
All as per srl item No 13.04 above but for SILVER OAK trees
27
-
-
... More
All as per srl item No 13.04 above but for BOTTLE BRUSH Tree
33
-
-
... More
All as per srl itemNoo 13.04 above but for PUTRENJIVA tree
56
-
-
... More
All as per srl item. No 13.04 above but for DELONIX REGLA (Gulmohar) trees
67
-
-
... More
Al as per srl item No 13.04 above but for BOUGAN VILEA tree
61
-
-
... More
All as per srl item No 13.04 above but for CHAKRASIA tree
63
-
-
... More
Excavation of pits of size 0.60x0.60x0.60 mtr deep removing debris, weeds/roots etc with and including supplying & earth / filling locally available fertile soil good and cattle manure mix in 4:1 ratio, adding fertilizers provision of antitermite treatment at plantation time, supplying & planting of approved species minimum of 4 to 5 feet high trees/plants Royal Palm Trees healthy sapling with well developed root system, replacement of causalities up to the completion of the defects liability/maint periods incl disposal of dead plants at a distance exc 250m and not exc 500m as directed by Engr in charge including flooding with water, and stakes(bamboo) 1.75 m high a s support to sapling etc complete all a s specified and as directed.
63
-
-
... More
All as per srl no. 13.12 above but for Fish Tall Palm
62
-
-
... More
Supplying & planting of approved species of Night Jasmin Shrubs, healthy sapling with well developed root system replacement of causalities up to the completion of the defects liability/maint periods incl disposal of dead plants at a distance exc 250m and not exc 500m as directed by Engr in charge supplying & filing good earth/soil and cattle manure mix in 4:1 ratio ,adding fertilizers with provision of antitermite treatment at plantation time including flooding with water & leveling etc complete all as specified and a s directed.
16
-
-
... More
All as per srl tem No 13.14 above but for Orange Jasmin Shrubs
10
-
-
... More
Supplying, laying and planting of Selection No. 1 Grass Lawn (100 live springs per sqm of area) succers in dibbling method and minimum green cover height of 1.5 inches over ground surface including providing, spreading and rolling of soil mixture of garden earth, manure to uniform ground covering complete all as specified and as directed, by the Engineer-in-Charge. Note- (i) The grass will be selected approved by the Engineer-in-Charge before plantation.
20
-
-
... More
Supplying & planting of approved species of ROSE healthy sapling with well developed root system replacement of causalities up to the completion of the defects liability/maint periods incl disposal of dead plants at a distance exc 250m and not exc 500m as directed by Engr in charge supplying & filing good earth/soil and cattle manure mix in 4:1 ratio ,adding fertilizers with provision of antitermite treatment at plantation time including flooding with water & leveling etc complete all as specified and a s directed.
16
-
-
... More
All a s per srl Item No 13.17 above but for GOLPHINIA
25
-
-
... More
All as per srl item No 13.17 above but for PLUM BAGO
24
-
-
... More
All as per srl item No 13.17 above but for CHANDNI
48
-
-
... More
All as per srl item No 13.17 above but for LARGER TOMIA
25
-
-
... More
All as per srl item No 13.17 above but for MURRAYA
10
-
-
... More
Surface excavation n. exc. 30 cm deep and averaging 15 cm deep and getting out in soft loose soil, size of pit 0.45 x 0.45 mtr deep hedge plants minimum of height 6 inches, type of hedges Golden duranta complete all as specified and as directed.
180
-
-
... More
All as per srl item No 43 above but for Thuja hedge
Note :-The hedges will be selected ,approved by the Engineer- in-Charge before plantation.
30
-
-
... More
Supply only of PCC Garden Pot of large size (length- 16/18", Height-14/16", Width- 16/18") complete all as spd and directed
25
-
-
... More
For Maintaince for Trees, plants, shrubs, climber, lawn grass etc
(i) Maintenance and supervision of trees, plants, shrubs,climbers, lawn grass etc including Watering, pruning Spraying of pesticides, insecticides in the desired pèriodicity, weeding, watering and replacing the dead plants/ grass with new plants/grass etc and periodical maintenanice & painting of trees guards from the certified date of completion of phase-work. The contractor will have to employ sufficent services of gardner to maint the above mentined/cage of trees, shrubs, hadges, climber, plants, lawn grass etc in all days except bonafide govt holidays on the daily basis maintence. (Trees, plants, shrubs, climber, lawn grass etc, planted /executed shall be maintained for 11 months )
11
-
-
... More
(ii) The maintainance period of grass is 11 months and during maintenane perlod the rate quoted Includes Waterlng, pruning, spraying of pesticldes (mythell parathlyon dust 2 % overy 26 gram for pit) fungicides,Insecticides, adding fertilisers, removing of weeds and stacking of grass sapllng preparatlon of grass basln. (iii) The contractor shall ensure that he is having tractor tanker, small tanker on rickshaw fitted wlth hose pipe etc for watering purposes and requisite equipments for spraying medicine on plants, ploughing the earth for weeding out unwanted growth/grass etc In running conditlon through out the perlod.
(iv) The follage & other unwanted Items shall be removed from the site to a plaçe as Maintenance and supervision of directed by GE/Englneer-in-charge
(v) The contractor shall be solely responsible in case of any accident for the risk involved in the work and nothing shall be paid by the department
(vi) The contractor shall not paid any additional payment for maint work is mentioned above for Sr 41 note (i) to (vi) and rate quaoted shall be deemed to inclusive of maint work as described above.
-
-
-
... More
BASEKT BALL, VOLLEY BALL, BADMINTON, FOOTBALL AND HOCKEY GROUNDS WORKS
NOTE:- For items of BASEKT BALL, VOLLEY BALL, BADMINTON, FOOTBALL AND HOCKEY GROUNDS WORKS notes given at the beginning of SCHEDULE 'A' PART -XIV (BASEKT BALL, VOLLEY BALL, BADMINTON, FOOTBALL AND HOCKEY GROUNDS WORKS) shall also be applicable.
-
-
-
... More
M&L for posts and struts mild steel tube works of dia 50-150mm fixed in concrete including cuttings tops to shape as directed, drilling holes notching for wire etc for different playgrounds and alike complete all as specified and as directed.
1126.79
-
-
... More
S & F Basket ball ring with net and fibre board 12 mm thick , made in one piece, non reflective, flat front surface fixed in frame with screws complete all as specified and as directed.
2
-
-
... More
M&L for 8 layer Sythetic acrylic coating to make all weather sythetic surface complete all as specified and as directed.
1020
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements