Military Engineer Services Tender

M&L for scraping & preparation of new/old treated horizontal concrete or bituminous roads, pavements surfaces not exceeding 10 cm width or girth with wire brushes etc and painting lines, dashes, strips, circles and other markings with one coat of water thinable/matt finished road marking retro reflective paint with glass beads, white/orange/yellow/black or any other colour as approved by GE using mechanical pavement marking machine (Air/Airless spray applications as per IS 164) line lazer 5900 of M/s Graco or equivalent as approved by GE complete all as specified and as directed by the Engineer-in-charge. Make: Apcotrack manufactured by Asian paints/ guide line of Berger or equivalent make as specified as approved by GE. Note:- Thickness of paint shall be minimum 240 micron (Dry film thickness) for each coat after application. Specification of the machine is as under:- Graco line lazer 5900 with 2 guns and the maximum GPM(LPM) : 1.60 (6.0), PSI (Bar) : 3300 (227), Engine cc (HP) : 160 (5.5) and maximum tip size : 0.043 or Graco line lazer 200 HS with 2 guns and the maximum GPM(LPM) : 2.15 (8.14), PSI (Bar) : 3300 (227), Engine CC (HP) : 200 (6.5) and maximum tip size : 0.047.

M&L for writing letters or figures or squares (Block, Roman, Italic or Indian) of any height and of any width with synthetic enamel paint including preparation of surfaces complete all as specified and as directed by Engr-in-charge. Make : Asian Paint/Berger or equivalent.

M&L for complete removal of existing thermoplastic / water base paint layer (any number of layers) over concrete, black bituminous pavements surfaces by mechanial means including removal & cleaning etc complete all as specified and directed by Engr-in-charge.