Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Paints and Enamels
Furnitures and Fixtures
Eprocure
Opening Date14 Nov 2024
Closing Date5 Dec 2024
Tender Amount₹ 22,00,000
Costs
EMD
₹ 44,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_684011_1Bid Award Id
ViewTender No
8799/BKT/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Ditto- all as per item No 1 above as applicable but for back Stiffener.
10
-
-
... More
Ditto- all as per item No 1 above as applicable but for bottom stiffener.
10
-
-
... More
Ditto- all as per item No 1 above as applicable but for Arms.
10
-
-
... More
Ditto- all as per item No 1 above as applicable but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete all as specified and directed.
200
-
-
... More
Ditto- all as per item No 1 above as applicable but for Removal of u/s cane and supply and re-canning of chair writing/CBA with 2mm wide half round virgin premium white or approved colour plastic cane of approved make and quality except the border which shall be 3mm flat swide half round virgin premium white or approved colour plastic cane of approved make and quality and weaving must be in accordance to Godrej Pattern as shown on drawing FD-03(M)Sheet 1/1 complete all as specified and directed.
50
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF CHAIR WRITING:
Labour & Material for comprehensive including petty repair and fitment ( where no replacement of damaged part is required) of the chair writing / CBA by repairing, fitting & fixing the loosened parts and members of the item using nails, screws, metal strips etc to enhance the longevity and structural strength of the item or by repairing and fixing surface irregularities or defect by preparing and fixing the surface defects by applying putty, PoP etc and then applying atleast two coats of French polish as per procedure mentioned in the particular specification after proper cleaning and preparation of the surface and proper dyeing to match with existing surface etc. complete all as specified and directed.
25
-
-
... More
REPAIR TO CHAIR DINING :- Ditto-- all as per item 1 above as applicable but for chair dinning. All as mentioned above as applicable for S&F front leg (left or right ) made out with IInd class seasoned hard wood of size and shape as per existing chair or as per Drg complete all as specified and directed.
30
-
-
... More
Ditto- all as per item No 10 above as applicable but for rear leg (left or right)
30
-
-
... More
Ditto- all as per item No 10 above as applicable but for Front/Rear/Side members of seat.
30
-
-
... More
Ditto- all as per item No 10 above as applicable but for bottom stiffener
30
-
-
... More
Ditto- all as per item No 10 above as applicable but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete all as specified and directed.
600
-
-
... More
Ditto- all as per item No 10 above as applicable but for Removal of u/s cane and supply and re-canning of chair dining with 2mm wide half round virgin premium white or approved colour plastic cane of approved make and quality except the border which shall be 3mm flat swide half round virgin premium white or approved colour plastic cane of approved make and quality and weaving must be in accordance to Godrej Pattern as shown on drawing FD-03(M)Sheet 1/1 complete all as specified and directed.
150
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF CHAIR DINING:
All as per item no. 09 as applicable but for Chair Dining.
75
-
-
... More
REPAIR TO CHAIR EASY :- Ditto all as per items No 1 above but for chair easy. All as mentioned above as appicable for S&F front leg (left or right ) made out with IInd class seasoned hard wood of size and shape as per existing chair or as per Drg complete all as specified and directed.
16
-
-
... More
Ditto- all as per item No 17 above as applicable but for Rear leg (left and right)
16
-
-
... More
Ditto- all as per item No 17 above as applicable but for front/ rear/side members of seat Frame .
16
-
-
... More
Ditto- all as per item No 17 above as applicable but for top/ bottom/side members of Back Frame .
16
-
-
... More
Ditto- all as per item No 17 above as applicable but for bottom stiffner (front and Back below seat frame)
16
-
-
... More
Ditto- all as per item No 17 above as applicable but for arms (Left or Right)
16
-
-
... More
Ditto- all as per item No 17 above as applicable but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete all as specified and directed.
320
-
-
... More
Ditto- all as per item No 17 above as applicable but for Removal of u/s cane and supply and re-canning of chair easy with 2mm wide half round virgin premium white or approved colour plastic cane of approved make and quality except the border which shall be 3mm flat swide half round virgin premium white or approved colour plastic cane of approved make and quality and weaving must be in accordance to Godrej Pattern as shown on drawing FD-03(M)Sheet 1/1 complete all as specified and directed.
80
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF CHAIR EASY:
All as per item no. 09 as applicable but for Chair Easy.
40
-
-
... More
REPAIR TO TABLE 900 X 600 X 760MM WITH/WITHOUT DRAWER :- Labour & Material for dismantling/ opening of joints / removal / repair of damaged/ broken parts or member of Table 900mm x 600mm x 760mm with drawer or without drawer as mentioned below where required and provision of replacement of the same member and fixing it, applying filler or putty in the minor cracks, and atleast two coats of polishing with French polish to the whole repaired table ( Qty of each polished item will be measured and paid separately) as per procedure mentioned in the particular specification after proper cleaning and preparation of the surface and proper dyeing to match with existing surface etc and also including shifting, transporting and stacking of furniture and equipment at the site and furniture store or yard alike by the contractors' own arrangement and cost. All as mentioned above as applicable for S&F Table top of size 900 mm x 600 mm made of 18 mm BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete all as specified and directed.
10
-
-
... More
Ditto all as per item no. 26 above as applicable but for S&F leg made out of IInd class seasoned hard wood.
10
-
-
... More
Ditto all as per item no. 26 above as applicable but for S&F long rail made out of IInd class seasoned hard wood.
8
-
-
... More
Ditto all as per item no. 26 above as applicable but for S&F short rail made out of IInd class seasoned hard wood.
8
-
-
... More
Ditto all as per item no. 26 above as applicable but for S&F middle stiffener made out of IInd class seasoned hard wood.
10
-
-
... More
Ditto all as per item no. 26 above as applicable but for S&F side stiffener made out of IInd class seasoned hard wood.
10
-
-
... More
Ditto all as per item no. 26 above as applicable but for S&F drawers front panel made of 18 mm HDHMR board BWR type laminated with 1 mm thick laminate on one side and balancing white on other side
5
-
-
... More
Ditto all as per item no. 26 above as applicable but for S&F drawers back / side panel made of 18 mm HDHMR board BWR type laminated with 1 mm thick laminate on one side and balancing white on other side
10
-
-
... More
Ditto all as per item no. 26 above as applicable but for S&F drawers bottom panel made of 12 mm HDHMR board BWR type laminated with 1 mm thick laminate on one side and balancing white on other side
6
-
-
... More
Ditto all as per item no. 26 above as applicable but for S&F set of 2 of premium quality heavy duty soft closing telescopic channels of make: godrej / ebco / hettich / dorset or equivalent as approved and specified, including modification required in the drawers and cabinet for drawers for fixation of telescopic channel.
6
-
-
... More
Ditto all as per item no. 26 above as applicable but for S&F locks of approved make with min three SS keys for drawer for the table as per existing table design complete all as specified and directed.
10
-
-
... More
Ditto all as per item no. 26 above as applicable but for S&F chrome plated or brass knobs for drawer for the table as per existing table design complete all as specified and directed.
10
-
-
... More
Ditto all as per item no. 26 above as applicable but for S&F 'L' shaped metal sheet strip for fixation to the legs of the table for strengthening of the joints wherever required.
40
-
-
... More
Ditto all as per item no. 26 above as applicable but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete all as specified and directed.
40
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE 900 X 600 X 760MM WITH/WITHOUT DRAWER:
All as per item no. 09 as applicable but for TABLE 900 X 600 X 760MM WITH/WITHOUT DRAWER.
10
-
-
... More
REPAIR TO TABLE WRITING :-Ditto all as per items No 26 above but for Table writing. All as mentioned above as applicable for S & F top for table writing of 18 mm BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete all as specified and directed.
10
-
-
... More
Ditto all as per item no. 41 above as applicable but for S&F drawers front panel made of 18 mm HDHMR board BWR type laminated with 1 mm thick laminate on one side and balancing white on other side
5
-
-
... More
Ditto all as per item no. 41 above as applicable but for S&F drawers back / side panel made of 18 mm HDHMR board BWR type laminated with 1 mm thick laminate on one side and balancing white on other side
10
-
-
... More
Ditto all as per item no. 41 above as applicable but for S&F drawers bottom panel made of 12 mm HDHMR board BWR type laminated with 1 mm thick laminate on one side and balancing white on other side
5
-
-
... More
Ditto all as per item no. 41 above as applicable but for S&F premium quality heavy duty soft closing telescopic channels of make: godrej / ebco / hettich / dorset or equivalent as approved and specified, including modification required in the drawers and cabinet for drawers for fixation of telescopic channel.
10
-
-
... More
Ditto all as per item no. 41 above as applicable but for S&F locks of approved make with min three SS keys for drawer and door shutter for the table as per existing table design complete all as specified and directed.
10
-
-
... More
Ditto all as per item no. 41 above as applicable but for S&F Door shutter made of 18mm thick, HDHMR board BWR type laminated with 1 mm thick laminate on one side and balancing white on other side, with 4mm thick teak wood edging and auto soft closing 180 degree concealed hinges screwed and chrome plated or brass knob 35mm size.
6
-
-
... More
Ditto all as per item no. 41 above as applicable but for S&F Back of table writing made of 6mm ply wood BWR type laminated with 1 mm thick laminate balancing white on both side.
10
-
-
... More
Ditto all as per item no. 41 above as applicable but for S&F Side of table writing made of 18 mm thick HDHMR BWR type laminated with 1 mm thick laminate on one side and balancing white on other side.
10
-
-
... More
Ditto all as per item no. 41 above as applicable but for Partition shelf for cabinet made of 18 mm thick HDHMR board BWR type laminated with 1 mm thick laminate on one side and balancing white on other side
10
-
-
... More
Ditto all as per item no. 41 above as applicable but for S&F new legs made out of IInd class seasoned hard wood.
10
-
-
... More
Ditto all as per item no. 41 above as applicable but for S&F middle stiffener made out of IInd class seasoned hard wood.
10
-
-
... More
Ditto all as per item no. 41 above as applicable but for S&F side stiffener made out of IInd class seasoned hard wood.
10
-
-
... More
Ditto all as per item no. 41 above as applicable but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete all as specified and directed.
40
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF Table Writing:
All as per item no. 09 as applicable but for Table Writing.
10
-
-
... More
REPAIR TO TEAPOY :- Ditto all as per items No 26 above but for Teapoy. All as mentioned above as applicable for S & F top for teapoy made of 18 mm BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete all as specified and directed.
20
-
-
... More
Ditto all as per item no. 56 above as applicable but for S&F leg made out of IInd class seasoned hard wood.
60
-
-
... More
Ditto all as per item no. 56 above as applicable but for S&F long rail made out of IInd class seasoned hard wood.
30
-
-
... More
Ditto all as per item no. 56 above as applicable but for S&F short rail made out of IInd class seasoned hard wood.
30
-
-
... More
Ditto all as per item no. 56 above as applicable but for S&F middle stiffener made out of IInd class seasoned hard wood.
15
-
-
... More
Ditto all as per item no. 56 above as applicable but for S&F side stiffener made out of IInd class seasoned hard wood.
30
-
-
... More
Ditto all as per item no. 56 above as applicable but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete all as specified and directed.
80
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TEAPOY:
All as per item no. 09 as applicable but for teapoy.
20
-
-
... More
REPAIR TO TABLE PEG :- Ditto all as per items No 26 above but for Table Peg.
All as mentioned above as applicable for S & F top for table peg made of 18 mm BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete all as specified and directed.
40
-
-
... More
Ditto all as per item no. 64 above as applicable but for S&F leg made out of IInd class seasoned hard wood.
120
-
-
... More
Ditto all as per item no. 64 above as applicable but for S&F long rail made out of IInd class seasoned hard wood.
60
-
-
... More
Ditto all as per item no. 64 above as applicable but for S&F short rail made out of IInd class seasoned hard wood.
60
-
-
... More
Ditto all as per item no. 64 above as applicable but for S&F middle stiffener made out of IInd class seasoned hard wood.
30
-
-
... More
Ditto all as per item no. 64 above as applicable but for S&F side stiffener made out of IInd class seasoned hard wood.
60
-
-
... More
Ditto all as per item no. 64 above as applicable but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete all as specified and directed.
160
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE PEG:
All as per item no. 09 as applicable but for table peg.
30
-
-
... More
REPAIR TO TABLE CENTRE WITH SUNMICA / GLASS TOP :- Ditto all as per items No 26 above but for Table centre with sunmica top or glass top.
All as mentioned above as applicable but for S&F Top of Table Centre made out of 18 mm BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete all as specified and directed.
12
-
-
... More
Ditto all as per item no. 72 above as applicable but for S&F Leg of same shape and size as existing made out of Ist class hard wood (kiln seasoned teak wood).
40
-
-
... More
Ditto all as per item no. 72 above as applicable but for S&F Top long rail made out of IInd class seasoned hard wood.
20
-
-
... More
Ditto all as per item no. 72 above as applicable but for S&F Top short rail made out of IInd class seasoned hard wood.
20
-
-
... More
Ditto all as per item no. 72 above as applicable but for S&F Side stiffener made out of IInd class seasoned hard wood.
40
-
-
... More
Ditto all as per item no. 72 above as applicable but for S&F Middle stiffener or any other supporting wooden member made out of IInd class seasoned hard wood.
20
-
-
... More
Ditto all as per item no. 72 above as applicable but for S&F new toughened tinted or non tinted as directed ,glass 5 / 6 mm thick or as per existing size and shape & size similar to existing or as per requirement as specified and as directed duly shaped, chamfered, polished and edged made smooth, fixed to the table centre after due repair and polish complete all as specified and directed.
4
-
-
... More
Ditto all as per item no. 72 above as applicable but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete all as specified and directed.
48
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE CENTRE:
All as per item no. 09 as applicable but for table centre.
10
-
-
... More
REPAIR TO SOFA SET 4 SEATER/5 SEATER :-Labour & Material for dismantling/ opening of joints / removal / repair of damaged/ broken parts or member of Sofa Set 3 seater or 1 seater or 2 seater as mentioned below where required and provision of replacement of the same member or material and fixing it including removing of unserviceable tapestry, string dori, cushions, foam or padding, etc, applying filler or putty in the minor cracks, and atleast two coats of polishing with French polish to the whole repaired sofa ( Qty of each polished item will be measured and paid separately) as per procedure mentioned in the particular specification after proper cleaning and preparation of the surface and proper dyeing to match with existing surface etc and also including shifting, transporting and stacking of furniture and equipment at the site and furniture store or yard alike by the contractors' own arrangement and cost. All as directed by Engr-in-charge.
All as mentioned above as applicable but for S&F Arm of sofa set 3 seater or 1 seater or 2 seater made out of IInd class seasoned hard wood.
10
-
-
... More
Ditto all as per item no. 81 above as applicable but for S&F front leg (left or right) of sofa set single or 3 seater made out of IInd class seasoned hard wood duly french polished of size and pattern all as shown on drg.
10
-
-
... More
Ditto all as per item no. 81 above as applicable but for S&F rear leg (left or right) of sofa set single or 3 seater made out of IInd class seasoned hard wood duly french polished of size and pattern all as shown on drg.
10
-
-
... More
Ditto all as per item no. 81 above as applicable but for S&F Side Stiffners of sofa set single or 3 seater made out of IInd class seasoned hard wood duly french polished of size and pattern all as shown on drg.
20
-
-
... More
Ditto all as per item no. 81 above as applicable but for S&F Middle Stiffners of sofa set single or 3 seater made out of IInd class seasoned hard wood. duly french polished of size and pattern all as shown on drg.
20
-
-
... More
Ditto all as per item no. 81 above as applicable but for S&F long rails of sofa set single or 3 seater made out of IInd class seasoned hard wood duly french polished of size and pattern all as shown on drg.
10
-
-
... More
Ditto all as per item no. 81 above as applicable but for S&F short rails of sofa set single or 3 seater made out of IInd class seasoned hard wood duly french polished of size and pattern all as shown on drg.
10
-
-
... More
Ditto all as per item no. 81 above as applicable but for S&F supporting members of sofa set single or 3 seater made out of IInd class seasoned hard wood duly french polished of size and pattern all as shown on drg.
20
-
-
... More
Ditto all as per item no. 81 above as applicable but for supply of new HR foam cushion Make-Sleepwell /Godrej /Kurlon / Duroflex or equivalent 100 mm thick 32 density duly 530mm W x 560 mm L x 100 mm Thick or as per drg covered duly approved complete all as specified and directed.
160
-
-
... More
Ditto all as per item no. 81 above as applicable but for supply of new cushion cover of superior quality tapestry cloth ( Leatherette or premium fabric velvet type as specified and approved) cover of specified colour and pattern with good quality zip/chain (Not less than Rs300/Mtr) alongwith inner cotton lining cloth cover with perfect fit for cushion of size 530mm W x 560 mm L x 100 mm Thick or as per drg, duly approved complete all as specified and directed. .
200
-
-
... More
Ditto all as per item no. 81 above as applicable but for comprehensive repair of sofa set 3 seater ( designer style or TP drg ) as per existing design by removing and replacing of old U/S tapestry Cloth / Leather / rexine cloth , hession Cloth,Old Spring, cushion / foam, doori & S&F new tapestry material ( Leather / leatherette / velvet cloth as per exisitng item), hssion Cloth, Springs, cushions / HR foams of Make-Sleepwell /Godrej /Kurlon / Duroflex or equivalent padding of density and make as directed, doori, etc along with any other wooden or metal or plywood parts of Sofa 3 seater as per existing item shape / size / design all as required complete all as specified and directed.
2
-
-
... More
Ditto all as per item no. 91 above as applicable but for comprehensive repair of sofa set 2 seater ( designer style or TP drg ) as per existing design.
2
-
-
... More
Ditto all as per item no. 91 above as applicable but for comprehensive repair of sofa set 1 seater ( designer style or TP drg ) as per existing design.
4
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF SOFA SET 3/2/1 SEATER:
All as per item no. 09 as applicable but for Sofa Set 3/2/1 seater.
2
-
-
... More
REPAIR TO TABLE DRESSING GENTS WITH MIRROR :-Ditto all as per items No 26 above but for Table dressing gents with mirror.
All as mentioned above as applicable but for Back side of the box of table with 12mm thick BWR grade plywood in one piece.
4
-
-
... More
Ditto all as per item no. 95 above as applicable but for Top of the box of table with 12 mm thick BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on both sides, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices.
4
-
-
... More
Ditto all as per item no. 95 above as applicable but for Bottom of box with 12 mm thick BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on both sides, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices.
4
-
-
... More
Ditto all as per item no. 95 above as applicable but for Sides and partition with 12 mm thick BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on both sides, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices.
4
-
-
... More
Ditto all as per item no. 95 above as applicable but for Drawers including replacement of Knobs with chrome plated or brass knobs complete all as specified and directed.
4
-
-
... More
Ditto all as per item no. 95 above as applicable but for Looking mirror with new mirror of 5.5 mm thick make - Swastika/Modiguard / Atul free from destruction and other defects with complete teak wood frame enclosed with 6 mm thick plywood BWR type.
4
-
-
... More
Ditto all as per item no. 95 above as applicable but for Aluminum channel with standard aluminum channel having two 'U' shaped channels for sliding of plain glass of 5mm thick in qty as reqd for each table.
4
-
-
... More
Ditto all as per item no. 95 above as applicable but for Plain sliding glass 5mm thick with new sliding glass in qty as reqd for each table all as shown in drg.
8
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE DRESSING GENTS WITH MIRROR:
All as per item no. 09 as applicable but for Table dressing gents with mirror.
4
-
-
... More
REPAIR TO TABLE DRESSING LADIES WITH MIRROR:- Ditto all as per items No 26 above but for Table dressing ladies with mirror.
All as mentioned above as applicable but for Top of the table dressing ladies with 18mm thick prelaminated HDHMR board BWR type teak veneered face on top and other side commercial.
4
-
-
... More
Ditto all as per item no. 104 above as applicable but for Back of table with 12mm thick ply wood commercial type BWR.
4
-
-
... More
Ditto all as per item no. 104 above as applicable but for Side and partition with 12mm thick prelaminated HDHMR board BWR type teak veneered face on both side.
4
-
-
... More
Ditto all as per item no. 104 above as applicable but for Bottom 12mm thick commercial BWR plywood all as specified and as directed.
4
-
-
... More
Ditto all as per item no. 104 above as applicable but for drawers replaced with 6mm thick ply wood BWR type.
4
-
-
... More
Ditto all as per item no. 104 above as applicable but for replacement of unserviceable looking mirror with new mirror of 5.5mm thick Make - Atul, Modiguard or Golden fish free from all defects with complete teak wood frame enclosed with 6mm thick ply wood BWR type.
4
-
-
... More
Ditto all as per item no. 104 above as applicable but for Aluminum channel with standard aluminum channel having two 'U' shaped channels for sliding of plain glass of 5 mm thick in qty as reqd for each table.
4
-
-
... More
Ditto all as per item no. 104 above as applicable but for Plain sliding glass 5mm thick with new sliding glass in qty as reqd for each table all as shown in drg.
8
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE DRESSING LADIES WITH MIRROR:
All as per item no. 09 as applicable but for Table dressing ladies with mirror.
4
-
-
... More
REPAIR TO BOOK CASE SMALL WOODEN :- Ditto all as per items No 26 above but for book case wooden.
All as mentioned above as applicable but for top, side and bottom members for book case made of 19 mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.
5
-
-
... More
Ditto all as per items No 113 above as applicable but for shelves for book case made of 19 mm thick BWR grade HDHMR of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.
5
-
-
... More
Ditto all as per items No 113 above as applicable but for back for book case made of 06 mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.
5
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF BOOK CASE WOODEN:
All as per item no. 09 as applicable but for Book case wooden.
4
-
-
... More
REPAIR TO BED PLY WOOD TOP:- Ditto all as per items No 26 above but for bed plywood top.
All as mentioned above as applicable but for Removing of old unserviceable back rest of bed and S&F new back rest as per existing size and shape of IInd class hard wood incl polishing (two or more coats) over a coat of wood filler after preparation of surface.
5
-
-
... More
Ditto all as per items No 117 above as applicable but for Removing of old unserviceable foot rest of bed & S&F of foot rest made as per existing size and shape or as per Drg IInd class hard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface.
5
-
-
... More
Ditto all as per items No 117 above as applicable but for Removing of old ply top and S&F new ply top of 12mm thick BWR grade plywood of make: Greenply/ Archidply/ Century Ply or equivalent as approved.
10
-
-
... More
Ditto all as per items No 117 above as applicable but for Removal of old wooden stiffeners and S&F IInd class hard wood stiffeners of size 900 x 50 x 60mm suitable for bed all as shown in Drg incl polishing two or more coats of wood filler after preparation of surface etc.
10
-
-
... More
Ditto all as per items No 117 above as applicable but for Taking out old unsv long rail of bed plywood and providing of new long rail of IInd class hard wood of existing shape and size all as specified and Drg incl polishing two or more coats over a coat of wood filler after preparation of surface etc.
10
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF BED PLYWOOD TOP:
All as per item no. 09 as applicable but for Bed wooden plytop alongwith provision of metal L bend plate for supporting legs etc.
10
-
-
... More
REPAIR TO TABLE DINING 6/8 PERSONS :- Ditto all as per items No 26 above but for Table dining 6 or 8 seater.
All as mentioned above as applicable but for Top of table dining 6 seater of size 1500mm x 900mm or as per drg as per drg or existing table, made of 18mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.
10
-
-
... More
Ditto all as per items No 123 above as applicable but for Top of table dining 8 seater of size 1800mm x 900mm or as per drg or existing table, made of 18mm thick BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.
5
-
-
... More
Ditto all as per items No 123 above but for Long rail of table dining 6 seater made of IInd class hard wood.
10
-
-
... More
Ditto all as per items No 123 above as applicable but for Long rail of table dining 8 seater made of IInd class hard wood.
5
-
-
... More
Ditto all as per items No 123 above as applicable but for Short rail of table dining 6 or 8 seater made of IInd class hard wood.
15
-
-
... More
Ditto all as per items No 123 above as applicable but for legs of table dining 6 or 8 seater made of IInd class hard wood.
15
-
-
... More
Ditto all as per items No 123 above as applicable but for replacement of rubber or plastic shoes steel plated, with SS Screws to the bottom of each legs.
60
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE DINING 6 OR 8 SEATER:
All as per item no. 09 as applicable but for Table dining 6 or 8 seater.
10
-
-
... More
REPAIR TO SIDE BOARD :- Ditto all as per items No 26 above but for Side Board.
All as mentioned above as applicable but for Doors Double leaf made of 18mm thick BWR grade HDHMR board as per existing item or as directed, make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item. including replacement of butt hinges, knobs and hasp & stapple complete all as specified and directed.
4
-
-
... More
Ditto all as per items No 131 above as applicable but for Drawers of side board 18mm thick BWR grade HDHMR board with laminate as mentioned above.including replacement of CP Knobs, soft closing telescopic channel with fitment and fixation.
4
-
-
... More
Ditto all as per items No 131 above as applicable but for Long rail of side board made of IInd class hard wood of existing shape and size.
4
-
-
... More
Ditto all as per items No 131 above as applicable but for Short rail of side board made of IInd class hard wood of existing shape and size..
4
-
-
... More
Ditto all as per items No 131 above as applicable but for Back of side board made of 6mm thick ply wood commercial type BWR.
4
-
-
... More
Ditto all as per items No 131 above as applicable but for Top of side board made of 18mm thick BWR grade HDHMR board with laminate as mentioned above.
4
-
-
... More
Ditto all as per items No 131 above as applicable but for Sides of side board made of 18mm thick BWR grade HDHMR board with laminate as mentioned above..
4
-
-
... More
Ditto all as per items No 131 above as applicable but for Leg of side board made of IInd class hard wood of existing shape and size.
4
-
-
... More
Ditto all as per items No 131 above as applicable but for Partition of side board 18mm thick BWR grade HDHMR board with laminate as mentioned above.
4
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF SIDE BOARD:
All as per item no. 09 as applicable but for side board.
4
-
-
... More
REPAIR TO HAT STAND WITH MIRROR:-Ditto all as per items No 26 above but for Side Board.
All as mentioned above as applicable but for removing u/s brass or CP hooks in vintage design and supply & fixing Brass or CP hook in vintage design as per approved and specified design, shape, size and installing them on the repaired hat stand with mirror complete all as specified and directed.
20
-
-
... More
Ditto all as per items No 141 above as applicable but for replacement to unserviceable looking mirror with new mirror of 5.5mm thick Make - Atul, Modiguard or Golden fish free from all defects with complete teak wood edging enclosed complete all as specified and directed.
4
-
-
... More
Ditto all as per items No 141 above as applicable but for Back made of 18 mm thick Prelaminated HDHMR board BWR as per existing size / shape or as per drawing with teak wood edging all around.
4
-
-
... More
REPAIR TO COMPUTER TABLE: Ditto all as per items No 26 above but for Table computer MAP / TP.
All as mentioned above as applicable but for Top of 18mm thick exterior grade prelaminated HDHMR Board as per existing item with one side melamine face and balancing white on other side ISI marked with Ist class HW teak wood beading 4mm thick polishing with french polish (two or more coats) over a coat of wood filler / or PVC Edging duly fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete etc.complete all as specified and directed.
10
-
-
... More
Ditto all as per items No 144 above as applicable but for Keyboard Rack made of 18mm thick exterior grade prelaminated HDHMR Board as per existing item including SS/ Alumimium telescopic channel premium quality as required complete all as specified and directed.
10
-
-
... More
Ditto all as per items No 144 above as applicable but for Shelf / rack for CPU / other computer components as per existing size / shape or as per drawing made of 18mm thick exterior grade prelaminated HDHMR Board as per existing item
15
-
-
... More
Ditto all as per items No 144 above as applicable but for Rubber / Plastic premium quality Shoes fitted to the bottom of the frame / side / leg of the table.
40
-
-
... More
Ditto all as per items No 144 above as applicable but for Side of table computer made of 18mm thick exterior grade prelaminated particle board / MDF Board / Block Board
20
-
-
... More
Ditto all as per items No 143 above as applicable but for M&L for two coats of Painting with synthetic enamel paint of colour as directed after scraping and surface preparation and one coat of red oxide primer on metallic frame parts and two coats of Polishing after surface prepeartion with premium quality french polish on wooden parts.
10
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE COMPUTER:
All as per item no. 09 as applicable but for Table computer.
5
-
-
... More
REPAIR TO CHAIR DINING CUSHIONED :- Ditto all as per items No 01 above but for Chair dining cushioned.
All as mentioned above as applicable but for S&F front leg (left or right ) made out with IInd class seasoned hard wood of size and shape as per existing chair or as per Drg complete all as specified and directed.
8
-
-
... More
Ditto all as per items No 151 above as applicable but for rear leg (left or right)
8
-
-
... More
Ditto all as per items No 151 above as applicable but for Front/Rear/Side members of seat.
8
-
-
... More
Ditto all as per items No 151 above as applicable but for Stiffners.
16
-
-
... More
Ditto all as per items No 151 above as applicable but for replacement of rubber / plastic shoe of superior quality with steel plated screws of suitable size complete all as specified and directed.
160
-
-
... More
Ditto all as per items No 151 above as applicable but for Removing of existing U/S cushion from bottom seat of chair dining officers and S&F new HR foam cushion Make-Sleepwell/Godrej/ Kurlon, 75 mm thick 40 density duly covered with superior quality tapestry material ( Leatherette or velvet cloth as specified and approved) (Not less than Rs 300/Mtr) on top and cotton lining cloth on bottom of seat respectively including replacement of seat made of 12mm thick ply if required.
40
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF CHAIR DINING CUSHIONED:
All as per item no. 09 as applicable but for Chair dining cushioned.
40
-
-
... More
Material & Labour for preparation of old wooden surfaces and atleast two coats of polishing with French polish to the whole item as per procedure mentioned in the particular specification after proper cleaning and preparation of the surface and proper dyeing if required and directed alongwith anti termite and anti borer treatement to all the wooden parts of the item, etc complete all as specified and directed. To be noted: Qty considered below also include qty of items which are polished with french polish which is to be measured and paid separately for item no 1 to 155. All as mentioned above for Bed with ply wood top
15
-
-
... More
Ditto as per item no 157 above but for Chair writing/CBA
75
-
-
... More
Ditto as per item no 157 above but for Chair Easy
100
-
-
... More
Ditto as per item no 157 above but for Chair dining
200
-
-
... More
Ditto as per item no 157 above but for Sofa chair single seater
32
-
-
... More
Ditto as per item no 157 above but for Sofa set two seater
6
-
-
... More
Ditto as per item no 157 above but for Sofa set three seater
16
-
-
... More
Ditto as per item no 157 above but for Table 3'x2' with & without drawer
16
-
-
... More
Ditto as per item no 157 above but for Table writing
15
-
-
... More
Ditto as per item no 157 above but for Table dressing gents with mirror
6
-
-
... More
Ditto as per item no 157 above but for Table dressing ladies with mirror
6
-
-
... More
Ditto as per item no 157 above but for Table centre with Sunmica Top / Glass Top
20
-
-
... More
Ditto as per item no 157 above but for Table bed side
10
-
-
... More
Ditto as per item no 157 above but for Teapoy
30
-
-
... More
Ditto as per item no 157 above but for Table Peg
50
-
-
... More
Ditto as per item no 157 above but for Book case small
10
-
-
... More
Ditto as per item no 157 above but for Table dining 6 Pers
10
-
-
... More
Ditto as per item no 157 above but for Tabel dining 8 Pers
6
-
-
... More
Ditto as per item no 157 above but for Hat Stand Mirror Large /Small
10
-
-
... More
Ditto as per item no 157 above but for Chair dining cushioned
30
-
-
... More
PART 'B' : MAINT OF STEEL FURNITURE
REPAIR TO ALMIRAH STEEL LARGE/MED WITH SHELVES/ 1/2 H x 1/2S Labour & Material for repair / maint of almirah steel large/medium with shelves/ 1/2H x 1/2S by replacing / repair to the damaged, dented, broken or unserviceable part of the almirah as appended below complete all as specified and directed including supply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors' own arrangement complete all as specified and directed..
Removing of unserviceable locks and providing new locks of existing size and design such as 50 mm, Brass Lever 6 levers ISI marked Make: Harrisson Locks / Link Locks/ Godrej Locks/ Hettich / ebco or equivalent make duly approved by engr-in-charge with stainless steel keys in triplicate for Almirah large steel with shelves/ 1/2H x 1/2S and fixing including aligning and fitting them with existing 3 way locking system by riveting/ screw/ welding as required complete all as specified and directed..
80
-
-
... More
Ditto all as per items No 178 above as applicable but for replacement of unserviceable locks for Almirah Med / Small steel.
40
-
-
... More
Ditto all as per items No 178 above as applicable but for removing of unserviceable legs and providing new legs made out of 20 guage / 1mm thick MS CRCA sheet similar to existing shape, design & size & welding properly to almirah steel large with shelves / 1/2 H x 1/2 S as directed as per drg duly painted with two coats of synthetic enamel paint Olive green/ Smoke Gray or same as of existing colour as of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed by engr-in-charge, over a coat of red oxide primer by means of spray painting. All as directed by engr-in-charge.
10
-
-
... More
Ditto all as per items No 178 above as applicable but for almirah med steel.
6
-
-
... More
Ditto all as per items No 178 above as applicable but for repairing and fixing of shelves by making good of dents and removal of scratches etc and fixing to the almirah body by providing new clamps in qty 4 or as required or by welding for each shelf as per existing design or directed to adjusting / fixing the shelves.
20
-
-
... More
Ditto all as per items No 178 above as applicable but for removing of unserviceable shelves and providing and fixing the new shelves as per existing size and design made of 22 gauge MS CRCA sheet by riveting / clamps/ welding as per existing design complete all as specified and directed.
10
-
-
... More
Ditto all as per items No 178 above as applicable but for removing of unserviceable broken handles & providing new steel handle chromium plated similar to existing shape, size & design to almirah large/med steel with shelves / 1/2H x 1/2S & fix suitably complete all as specified and directed.
120
-
-
... More
Ditto all as per items No 178 above as applicable but for removing of unserviceable 3 way locking mechanism / device alongwith rods & clamps for top and bottom locking of doors and providing new 3 way locking mechanism / device with rod of 10mm dia MS bar made to existing shape, size and design including cover for lock and clamping as required for almirah large steel complete all as specified and directed.
20
-
-
... More
Ditto all as per items No 185 above as applicable but for almirah med steel.
10
-
-
... More
Ditto all as per items No 178 above as applicable but for Spray painting to both external & internal surfaces of almirah large steel with shelves / 1/2H x 1/2S with one coat of red oxide primer and after it, two coats of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed (where extensive paintwork to surface is required).
80
-
-
... More
Ditto all as per items No 187 above as applicable but for almirah med steel
40
-
-
... More
Ditto all as per items No 178 above as applicable but for painting either by spray painting or by brush as required according to environment and conditions to external or internal surfaces or both as directed of almirah large steel with shelves / 1/2H x 1/2S ( This item is for items where surface of almirah does not require extensive paint work or needs light or petty touchup etc) with one coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting complete all as specified and directed.
40
-
-
... More
Ditto all as per items No 189 above as applicable but for almirah med steel
30
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF ALMIRAH STEEL:
Labour & Material for comprehensive repair including petty repair and fitment/ Denting/ Straightening of body or part and alignment of Door etc ( where no replacement of damaged part is required) of Almirah Large / small/ med steel with shelves / 1/2 H x 1/2S or any part thereof as required including repair/ fixing of hinges with welding , etc complete all as specified and directed.
20
-
-
... More
REPAIR TO BEDSIDE LOCKER STEEL:
Labour & Material for repair / maint of bedside locker steel by replacing / repair to the damaged, dented, broken or unserviceable part of the bedside locker steel as appended below complete all as specified and directed including supply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors' own arrangement as directed and specified by engr-in-charge.
Removing of unserviceable Hasp & Staple and providing new Hasp & Steel of existing shape & size as approved by engr-in-charge and fixing by riveting/ screw as required complete all as specified and directed.
20
-
-
... More
Ditto all as per items No 192 above as applicable but for removing of unserviceable legs and providing new legs made out of 1mm thick MS CRCA MS sheet similar to existing shape, design & size & welding properly to bed side locker steel as directed as per drg duly painted with two coats of synthetic enamel / hammertone paint in Olive green/ Smoke Gray or same as of existing colour as approved and directed by engr-in-charge, over a coat of red oxide primer by means of spray painting.
6
-
-
... More
Ditto all as per items No 192 above as applicable but for Repairing of shelves by providing new clamps or by welding as per existing design or directed to adjusting / fixing the shelves.
6
-
-
... More
Ditto all as per items No 192 above as applicable but for Removing of unserviceable shelves and providing and fixing the shelves by riveting / clamps/ welding as per existing design complete all as specified and directed.
6
-
-
... More
Ditto all as per items No 192 above as applicable but for Spray painting to both external & internal surfaces of bedside locker steel with one coat of red oxide primer and after it, two coats of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed (where extensive paintwork to surface is required).
32
-
-
... More
Ditto all as per items No 192 above as applicable but for painting either by spray painting or by brush as required according to environment and conditions to external or internal surfaces or both as directed of bedside locker steel ( This item is for items where surface of almirah does not require extensive paint work or needs light or petty touchup etc) with one coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed.
24
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF BEDSIDE LOCKER STEEL:
Ditto all as per items No 191 above as applicable but for Bedside Locker steel.
10
-
-
... More
REPAIR TO BED HARD STEEL( MAP):
Labour & Material for repair / maint of bed hard steel ( MAP) by replacing / repair to the damaged, dented, broken or unserviceable part of thebed hard steel ( MAP) as appended below complete all as specified and directed including supply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors' own arrangement as directed and specified by engr-in-charge.
Removing of unserviceable plywood 12 mm thick and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked Make: Greenply/ Archid Ply/ Century Ply or equivalent as approved complete all as specified and directed.
30
-
-
... More
Ditto all as per items No 199 above as applicable but for M&L for scrubbing, derusting and applying two coat of synthetic Black enamel paint (spray painting) incl preparation of surface all as directed by Engr - In - charge for Bed hard steel.
30
-
-
... More
Ditto all as per items No 199 above as applicable but for Removing of unserviceable prelaminated PB / MDF / HDHMR 18 mm thick of head board of bed hard steel and supply and fixing 18mm thick prelaminated HDHMR Make:- Greenply/ Archid Ply/ Century Ply or equivalent all as per specified and complete all as specified and directed.
10
-
-
... More
Ditto all as per items No 196 above as applicable but for Removing of unserviceable prelaminated particle board 18 mm thick of foot board of bed hard steel and supply and fixing 18mm thick prelaminated HDHMR exterior grade of make Greenply/ Archid Ply/ Century Ply or equivalent as approved ISI Marked all as per specified and complete all as specified and directed.
10
-
-
... More
Ditto all as per items No 199 above as applicable but for S&F in repair rubber shoe black for 38mm Square pipe suitable for legs of Bed hard Steel.
120
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF BED HARD STEEL( MAP):
Ditto all as per items No 191 above as applicable but for Bed Hard Steel MAP.
10
-
-
... More
REPAIR TO BOOK CASE STEEL:
Labour & Material for repair / maint of bedside locker steel by replacing / repair to the damaged, dented, broken or unserviceable part of the bedside locker steel as appended below complete all as specified and directed including supply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors' own arrangement as directed and specified by engr-in-charge.
Taking out unserviceable handle and S&F of new chromium plated Steel handle of same size, size & design as existing complete all as specified and directed.
16
-
-
... More
Ditto all as per items No 205 above as applicable but for Taking out unserviceable locks and S&F new brass lever 4/6 lever lock of make: harrisson/ Link/ godrej/ hettich /Ebco or equivalent make duly approved by engr-in-charge with stainless steel keys in triplicate complete all as specified and directed.
12
-
-
... More
Ditto all as per items No 205 above as applicable but for Opening of shelves and cleats and denting of de-shaped portion / welding as required and refixing in same position complete all as specified and directed.
10
-
-
... More
Ditto all as per items No 205 above as applicable but for Removing of unserviceable/broken glass and S&F new glass 3 mm thick of existing shape and size or as shown on drawing and directed by Engr-in-Charge. Make: Modiguard/Atul/Swastik or equivalent duly approved by GE.
12
-
-
... More
Ditto all as per items No 205 above as applicable but for Spray painting to both external & internal surfaces of Book case steel with one coat of red oxide primer and after it, two coats of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed (where extensive paintwork to surface is required).
10
-
-
... More
Ditto all as per items No 205 above as applicable but for painting either by spray painting or by brush as required according to environment and conditions to external or internal surfaces or both as directed of Book case steel ( This item is for items where surface of almirah does not require extensive paint work or needs light or petty touchup etc) with one coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed.
5
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF BOOK CASE STEEL:
Ditto all as per items No 191 above as applicable but for book case steel.
5
-
-
... More
REPAIR TO CHAIR REVOLVING/ COMPUTER/EXECUTIVE GODREJ PATTERN : Dismantling and re-assembling with new components of the following unserviceable part/components of chair revolving steel alongwith providing of material and labour including fitment, repair, shifting and stacking of chairs at the site all as specified and directed by Engr-in-charge of the following :-
Hydraulic system complete set as approved by GE
120
-
-
... More
Ditto all as per items No 212 above as applicable but for Chair leg wheel made of plastic ( first quality / not recycled) as approved by GE
600
-
-
... More
Ditto all as per items No 212 above as applicable but for Side handle as per existing shape, size & design and as directed.
120
-
-
... More
Ditto all as per items No 212 above as applicable but for replacement of unserviceable plywood chair seat with supply and fixing of moulded / formed plywood chair seat made of BWR type plywood.
120
-
-
... More
Ditto all as per items No 212 above as applicable but for replacement of unserviceable plywood chair back with supply and fixing of moulded / formed plywood chair back L shaped made of BWR type plywood.
120
-
-
... More
Ditto all as per items No 212 above as applicable but for Removal of U/S Foam seat bottom & back complete and S&F new Foam make Sleepwell / Kurlon / Godrej or equivalent as approved by Engr-in-charge including removing and fixing of PVC edging all around as per existing shape, size and design as required.
120
-
-
... More
Ditto all as per items No 212 above as applicable but for Removal of U/S Cushion upholstery material and supply & fixing of superior tapestry upholstery material cloth in colour and pattern as approved for Seat back & bottom both (rate not less than Rs 250/Mtr) as approved by engr-in-charge as per existing shape, size & Design as directed including removing and fixing of PVC edging all around as per existing shape, size and design as required.
84
-
-
... More
Ditto all as per items No 212 above as applicable but for Removal of U/S Cushion upholstery material and supply & fixing of premium leatherette upholstery material in colour and pattern as approved for Seat back & bottom both (rate not less than Rs 350/Mtr) as approved by engr-in-charge as per existing shape, size & design as directed including removing and fixing of PVC edging all around as per existing shape, size and design as required.
36
-
-
... More
Ditto all as per items No 212 above as applicable but premium quality Wheel Base made of plastic ( first quality / not recycled) with complete set
120
-
-
... More
Ditto all as per items No 212 above as applicable but for Iron Base plate with complete set
120
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF CHAIR REVOLVING:
Ditto all as per items No 191 above as applicable but for Labour and material for comprehensive repair including petty repair and fitment (where no replacement of damaged part is required) of chair revolving.
60
-
-
... More
REPAIR TO CHAIR NON REVOLVING CUSHIONED /VISITOR / CHAIR WRITING (MAP):
Dismantling and re-assembling with new components of the following unserviceable part / components of chair visitor alongwith providing of material and labour including fitment, repair, shifting and stacking of chairs at the site all as specified and directed by engr-in-charge of the following :-
Removal of U/S Foam seat bottom complete and S&F new Foam make Sleepwell / Kurlon / Godrej or equivalent as approved by GE.
45
-
-
... More
Ditto all as per items No 223 above as applicable but for removal of U/S Foam seat back complete and S&F new Foam make Sleepwell / Kurlon / Godrej or equivalent as approved by GE.
45
-
-
... More
Ditto all as per items No 223 above as applicable but for Removal of U/S Cushion upholstery material and supply & fixing of superior tapestry cloth in colour and pattern as approved for Seat back & bottom both (rate not less than Rs 250/Mtr) as approved by engr-in-charge as per existing shape, size & Design as directed including removing and fixing of PVC edging all around as per existing shape, size and design as required.
25
-
-
... More
Ditto all as per items No 223 above as applicable but for Removal of U/S Cushion upholstery material and supply & fixing of superior tapestry cloth / premium leatherite cloth in colour and pattern as approved for Seat back & bottom both (rate not less than Rs 250/Mtr) as approved by engr-in-charge as per existing shape, size & Design as directed including removing and fixing of PVC edging all around as per existing shape, size and design as required.
20
-
-
... More
Ditto all as per items No 223 above as applicable but for replacement of unserviceable plywood chair seat with supply and fixing of moulded / formed plywood chair seat made of BWR type plywood.
45
-
-
... More
Ditto all as per items No 223 above as applicable but for replacement of unserviceable plywood chair back with supply and fixing of moulded / formed plywood chair back L shaped made of BWR type plywood.
45
-
-
... More
Ditto all as per items No 223 above as applicable but for Supply and Fixing of rubber shoes of premium quality as per existing shape, size & design for the chair non revolving visitor complete all as specified and directed.
180
-
-
... More
Ditto all as per items No 223 above as applicable but for M&L for scrubbing and derusting, denting / repairing of de-shaped portion of frame and metal strips and applying one coat of primer and over it two coat of synthetic enamel paint of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed (by spray painting) of approved colour incl preparation of surface complete all as specified and directed.
45
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF CHAIR VISITOR:
Ditto all as per items No 191 above as applicable but for Labour and material for comprehensive repair including petty repair and fitment ( where no replacement of damaged part is required) of chair visitor.
20
-
-
... More
REPAIR TO CHAIR VARANDAH CANNED / PVC SEAT & BACK (MAP) Dismantling and re-assembling with new components of the following unserviceable part/components of chair varandah steel alongwith providing of material and labour including fitment, repair, shifting and stacking of chairs at the site all as specified and directed by EIC of the following:
Comprehensive repairs to broken mild steel components of chair varandah with gas welding, including replacing broken/ worn out legs with new 20mm dia MS pipe 1.6mm thick 75mm to100mm long for each chair.
170
-
-
... More
Ditto all as per items No 232 above as applicable but for Removing of all u/s canes of chair varandah and supply & recanning with premium plastic cane of size 4mm / 6mm half round best quality as per IS-5378-1968 including Two coat of Synthetic Enamel White / approved colour paint of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed to complete frame before canning after derusting and surface preparation including shaping / repairing the deshaped portion of the frame of chair all as specified and shown on Drg. after preparation of steel surfaces.
120
-
-
... More
Ditto all as per items No 232 above as applicable but for S & F PVC rubber Shoe/Toe of best quality after removing the old un- serviceable shoes complete all as specified and directed.
680
-
-
... More
Ditto all as per items No 232 above as applicable but for Removing and replacing unserviceable seat back & seat bottom PVC moulded by fitting with new PVC moulded seat back & seat bottom of chair verandah including two coat of Synthetic Enamel paint White /approved colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed to complete frame of chair after derusting and surface preparation including shaping / repairing the deshaped portion of the frame of chair all as specified and shown on Drg No -. FD/MAP-II/06, Make of the PVC Seat & Back - AMKO, Classic or Equivalent as approved by GE.
( Note :- Both Seat back & Seat bottom of the chair verandah shall be replaced to form 1 unit for the purpose of payment to the contractor.)
40
-
-
... More
REPAIRS TO CHAIR TUBULAR STEEL WITH OR WITHOUT ARMS:
Dismantling and re-assembling with new components of the following unserviceable part / components of chair tubular steel CB alongwith providing of material and labour including fitment, repair, shifting and stacking of chairs at the site all as specified and directed by engr-in-charge of the following:
Gas welding to broken members of chair tubular steel with & without arms as directed.
40
-
-
... More
Ditto all as per items No 236 above as applicable but for Painting of MS members of chair tubular steel with and without arms with two coat of synthetic enamel paint of olive green/ smoke gray or colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed by engr-in-charge after duly preparation of steel surface complete all as specified and directed.
40
-
-
... More
Ditto all as per items No 236 above as applicable but for Taking out unserviceable seats from steel chair with & w/o Arms and S&F IInd class hard wood seat of existing size & shape and fixed with suitable bolts, nuts and washer including polishing, painting and recanning with polythene white cane half round of premium virgin quality as approved by engr-in-charge as per IS-5378 -1968 2mm wide and 0.3mm thick for seats & 4mm wide & 0.4mm thick for bordering including supply of cane and labour of canning complete all as specified and directed.
15
-
-
... More
Ditto all as per items No 236 above as applicable but for steel chair back.
15
-
-
... More
Ditto all as per items No 236 above as applicable but for Taking out repairable seats from steel chair with & w/o Arms and fixing back the existing seat after recanning with polyethelyne white cane half round of premium virgin quality as approved by engr-in-charge as per IS-5378 -1968 2mm wide and 0.3mm thick for seats & 4mm wide & 0.4mm thick for bordering including supply of cane and labour of canning complete all as specified and directed.
25
-
-
... More
Ditto all as per items No 236 above as applicable but for steel chair back.
25
-
-
... More
Ditto all as per items No 236 above as applicable but for Taking out US arms rest from steel chair with arms and supply and fixing chair arms rest with suitable bolts, nuts and washer
10
-
-
... More
Ditto all as per items No 236 above as applicable but for S&F in repair hard rubber shoe black 20mm dia suitable for bottom of steel chair with suitable size of steel screw
120
-
-
... More
Ditto all as per items No 236 above as applicable but for S&F in repair hard rubber cap black suitable for 20mm dia at top of steel chair complete all as specified and directed.
80
-
-
... More
CONVERSION OF GI CHARPOY NYLON NEWAR INTO CHARPOY GI PIPE PLY WOOD TOP AND REPAIR OF CHARPOY GI PIPE PLYTOP AND CHARPOY IP FOLDING HARD TOP
Removing of unserviceable nylon newar and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked Make: Greenply/ Archid Ply/ Century Ply or equivalent as approved by engr-in-charge and fixing same with two nos of flat iron strip of size 900x32x5mm, bolts nuts and washers bolts of size 5x65mm 12 nos round countersunk head bolts after drilling the three holes of each long rail and drilling two hole on each short rail and two hole in flat iron complete all as directed including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing, alignment of charpoy to the level, chamfering of the edges as required and directed complete including labour for handling, shifting of furniture and equipement on site as well as on yard by contractor's own arrangement complete all as specified and directed.
20
-
-
... More
Removing of unserviceable elbow of charpoy GI pipe and S & F three way GI elbow 32mm medium grade ISI marked complete all as specified and directed.
16
-
-
... More
Removing of unserviceable check nut of GI Charpoy and s&f new check nut 32mm bore 10mm thick suitable for charpoi GI pipe 32mm bore complete all as specified & directed.
16
-
-
... More
M&L for removing the threadless/broken long rails from chairpoy GI pipe 32mm and S & F new long rail of 32mm dia GI pipe medium grade 1.88 mm long threaded at both ends and fixed to existing three way elbow 32mm dia and all shown on drawing (GI pipe make : TATA /Jindal or equivalent as approved by GE).
24
-
-
... More
Taking out existing old broken short rail from chairpoy GI 32 mm dia and providing in position 1 nos short rails made out of broken long rail obtained from taking down above item No 27(d) including threading on both ends complete fixing all as specified and shown on drg (Note : U/S check nuts to be replaced in above item and measured and paid as supply only under relevant items.
16
-
-
... More
Taking out existing old broken legs from chairpoy GI 32mm dia and providing 01 Nos new legs in position made out of old broken long rail/ short rail obtained from taking down above item No 27 (d) & 27(e) and S & F 3mm thick and 40 mm dia MS plate welded at bottom of leg and two Nos MS clamp made out of 25x3mm size FI welded legs including threading on top and painting of clamp with two coat of synthetic enamel paint over a coat of oxide primer and complete all as specified and directed.
16
-
-
... More
Opening of joints of GI Chairpoy of 32 mm pipe where repaired and reassembling incl provision at bottom of legs shall be plugged with 3mm thick mild steel sheet welded to bottom of legs and hard wood plugs shall not be provided.
24
-
-
... More
Supply and welding 02 Nos flat iron 25mmx3mm mild steel clamp made to shown on drawing shall be welded to all galvanised iron legs. Bottom of lower clamp shall be 275mm from top of Horizontal rails. Bottom of lower clamp shall be plugged with 2mm thick mild steel sheet.
16
-
-
... More
Removing of U/S Flat Iron and providing and fixing of new flat iron strip of size 900x32x5mm by welding to the Long rail as shown in the drawing complete all as specified and directed.
16
-
-
... More
Removing of unserviceable Plywood and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked Make: KitPly/ Century/ Archid Ply or equivalent as approved by engr-in-charge and fixing same with bolts nuts and washers, bolts of size 5x65mm 12 nos round countersunk head bolts complete all as directed including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing complete all including labour for handling, shifting of furniture and equipement on site as well as on yard by contractor's own arrangement complete all as specified and directed.
80
-
-
... More
Removing of unserviceable Plywood and supply and fixing 12 mm thick ply wood commercial BWR HDHMR ISI marked Make: Geenply/ Archid Ply/ Century Ply or equivalent as approved by engr-in-charge and fixing same with bolts nuts and washers, bolts of size 5x35 mm 16 nos round countersunk head bolts complete all as directed including tightening of loose frame/fixing / repairing of charpoy GI pipe folding's component by riveting/ screwing / welding as required to make the frame fit for fixing complete all including labour for handling, shifting of furniture and equipement on site as well as on yard by contractor's own arrangement complete all as specified and directed.
10
-
-
... More
M&L for scrubbing, derusting and applying two coat of synthetic Olive green / silver gray or approved colour enamel paint of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed by engr-in-charge (by spray painting) incl preparation of surface by derusting , scraping and straigtening bent part part of metal frame including handling, shifting of furniture and equipement on site as well as on yard by contractor's own arrangement complete all as specified and directed for charpoy folding IP Ply Top.
10
-
-
... More
REPAIR TO CHARPOY MS BOX SECTION WITH PLY WOOD TOP :-
Removing of unserviceable plywood 12 mm thick and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked Make: Greenply/ Archid Ply/ Century Ply or equivalent as approved by GE and complete all as specified and directed.
50
-
-
... More
M&L for scrubbing, derusting, repairing the deshaped portion of the frame and applying two coat of synthetic enamel paint (spray painting) of black or approved colour incl preparation of surface complete all as specified and directed for Charpoy MS Box section with plywood top
50
-
-
... More
Ditto all as per items No 257 above as applicable but replacement of legs made of 16 gauge MS CRCA rectangular section pipe 25mm x 65mm
10
-
-
... More
Ditto all as per items No 257 above as applicable but replacement of short rails made of 16 gauge MS CRCA rectangular section pipe 25mm x 65mm
5
-
-
... More
Ditto all as per items No 257 above as applicable but replacement of long rails made of 16 gauge MS CRCA rectangular section pipe 25mm x 65mm
5
-
-
... More
S&F in repair rubber shoe black for 32mm Square pipe suitable for legs of Charpoy MS Box section with plywood top.
200
-
-
... More
REPAIR TO TABLE OFFICE (OFFICER / CLERK) STEEL:
Labour & Material for repair / maint of table office (officer/clerk) steel by replacing / repair to the damaged, dented, broken or unserviceable part of the table office (officer/clerk) steel as appended below complete all as specified and directed including supply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors' own arrangement as directed and specified by engr-in-charge.
Dismantling of unserviceable table top and providing new top for table office officer steel (1800mm x1200mm) made of 18mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.
4
-
-
... More
Ditto all as per items No 263 above as applicable but for table office officers (1680mm x 870mm)
12
-
-
... More
Ditto all as per items No 263 above as applicable but for table office clerk steel (1200mmx900mm)
34
-
-
... More
Ditto all as per items No 263 above as applicable but for gas welding to all broken joints / defects of table office officer/clerk metal structure.
50
-
-
... More
Ditto all as per items No 263 above as applicable but for Repairing to the drawers of table office officers /clerk steel, making good dents, proper alignment for smooth function of drawers including for removing of unserviceable locks of drawer as per existing shape and size and supply & fixing new 6 brass lever locks as per existing shape and size with key in triplicate as specified in drg
150
-
-
... More
Ditto all as per items No 263 above as applicable but for removing of unserviceable handle of drawer as per existing shape and size and supply & fixing new handle of drawer as per existing shape and size with key in triplicate as specified in drg
40
-
-
... More
Ditto all as per items No 263 above as applicable but for Spray painting to both inside & outside of whole body incl drawer & legs of Table office officer steel with two coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed by engr-in-charge including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed.
16
-
-
... More
Ditto all as per items No 269 above as applicable but for table office clerk steel
34
-
-
... More
Ditto all as per items No 263 above as applicable but for S &F of rubber shoe with new rubber shoe of superior quality with suitable size complete all as specified and directed.
200
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE OFFICE STEEL:
Labour & Material for comprehensive repair including petty repair and fitment (where no replacement of damaged part is required) of Table office steel including supply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors' own arrangement complete all as specified and directed..
20
-
-
... More
REPAIR TO TABLE STEEL 900 X 900 X 760 MM :-
Ditto all as per items No 263 above as applicable but for Dismantling of unserviceable table top and providing new top for table steel 900 mm x 900 mm x 760 mm made of 18mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.
30
-
-
... More
Ditto all as per items No 273 above as applicable but for Gas welding to all broken joints of table Steel 900mm x900mm x760mm including Cutting of worn out/broken legs of table steel and replace with new square MS pipe 1.6mm thick and supporting members as per and fixing with gas welding complete all as specified and directed.
30
-
-
... More
Ditto all as per items No 273 above as applicable but for S &F of rubber shoe with new rubber shoe of superior quality with suitable size complete all as specified and directed..
120
-
-
... More
Ditto all as per items No 273 above as applicable but for Spray painting to both inside & outside of whole body of Table steel 900 mm x 900 mm x 760 mm with two coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed by engr-in-charge including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed.
30
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE STEEL 900 MM x 900 MM x 760 MM:
Ditto all as per items No 272 above as applicable but for Table steel 900 mm x 900 mm x 750 mm.
10
-
-
... More
REPAIR TO TABLE 900MM X 600MM X 760MM WITH DRAWER /WITHOUT DRAWER STEEL
Ditto all as per items No 263 above as applicable but for Dismantling of unserviceable table top and providing new top for table steel 900 mm x 600 mm x 760 mm made of 18mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.
20
-
-
... More
Ditto all as per items No 278 above as applicable but for Gas welding to all broken joints of table 900mm x600mm x760mm with drawer/ without drawer Steel including Cutting of worn out/broken legs of table steel and replace with new square MS pipe 1.6mm thick and supporting members as per and fixing with gas welding complete all as specified and directed.
20
-
-
... More
Ditto all as per items No 278 above as applicable but for Repairs to the drawer of table steel making good dents, proper alignment for smooth function of drawer.
6
-
-
... More
Ditto all as per items No 278 above as applicable but for removing of unserviceable locks of drawer as per existing shape and size and supply & fixing new 6 brass lever locks as per existing shape and size with key in triplicate as specified in drg
6
-
-
... More
Ditto all as per items No 278 above as applicable but for removing of unserviceable handle of drawer as per existing shape and size and supply & fixing new handle of drawer as per existing shape and size with key in triplicate as specified in drg
6
-
-
... More
Ditto all as per items No 278 above as applicable but for Spray painting to both inside & outside of whole body of Table steel 900 mm x 600 mm x 760 mm with two coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed by engr-in-charge including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed.
20
-
-
... More
Ditto all as per items No 278 above as applicable but for S &F in repair /replacement of rubber shoe of superior quality with suitable size complete all as directed and specified in drg.
80
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE STEEL 900 MM x 600 MM x 760 MM:
Ditto all as per items No 272 above as applicable but for Table steel 900 mm x 600 mm x 760 mm.
10
-
-
... More
REPAIR TO TEAPOY VERANDAH
Ditto all as per items No 263 above as applicable but for Gas welding to all broken joints of teapoy varandah including Cutting of worn out/broken legs of teapoy varandah and replace with new square MS pipe 1.6mm thick and supporting members as per and fixing with gas welding complete all as specified and directed.
4
-
-
... More
Ditto all as per items No 286 above as applicable but for Spray painting to both inside & outside of whole body of teapoy varandah with two coat of synthetic enamel / hammertone paint in white / black or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Gloss or equivalent as approved and directed by engr-in-charge including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete all as specified and directed.
4
-
-
... More
Ditto all as per items No 286 above as applicable but for Dismantling of unserviceable top of Teapoy Varandah and providing new top for top of Teapoy Varandah size 900mm x 450mm , made of 18mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.
4
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TEAPOY VARANDAH:
Ditto all as per items No 272 above as applicable but for Teapoy Varandah.
2
-
-
... More
REPAIR TO TABLE BED SIDE (MAP):
Ditto all as per items No 263 above as applicable but for replacement of Ply wood of back side of Table bed side with 6mm thick plywood BWR type Including hard wood stopper .
40
-
-
... More
Ditto all as per items No 290 above as applicable but for Gas welding to broken joints of Table Bed side Steel Frame of 18mm square pipe.
40
-
-
... More
Ditto all as per items No 290 above as applicable but for replacement of complete Table Bed side CRCA Steel Frame made of 18mm square pipe 18 gauge thickness .
40
-
-
... More
Ditto all as per items No 290 above as applicable but for replacement of bottom drawers of table bed side made of 18mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item inccluding CP handles etc.
40
-
-
... More
Ditto all as per items No 290 above as applicable but for replacement of top drawer of table bed side made of 18 mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item including CP handle.
40
-
-
... More
Ditto all as per items No 290 above as applicable but for replacement of Top of table bed side made of 18mm thick BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.
40
-
-
... More
Ditto all as per items No 290 above as applicable but for replacement of soft closing premium quality heavy duty telescopic channel SS of existing size and of best quality of make Ebco / Hettich or equivalent as approved by GE
80
-
-
... More
Ditto all as per items No 290 above as applicable but for replacement of side of table bed side made of 18mm thick BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.
80
-
-
... More
Ditto all as per items No 290 above as applicable but for Replacement of rubber shoes with S & F new rubber shoe of superior quality of suitable size complete all as specified and directed.
160
-
-
... More
LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE BED SIDE MAP:
Ditto all as per items No 272 above as applicable but for Table Bed Side MAP.
30
-
-
... More
REPAIR TO TABLE CENTRE WITH GLASS TOP BRASS/STEEL :-
Removing of unserviceable/broken glass top of table centre brass, Steel and S &F 10mm thick tinted toughened glass top as approved by engr-in-charge of existing size / shape or as per drg as directed and specified with cornor / edges of the top of table rounded and chamfered as shown in drawing including vacum rubber shoes for the top of legs and PVC shoes for the bottom of the legs complete all as specified and directed.
2
-
-
... More
Derusting, scraping, surface preparation of the metal frame of table centre brass / steel and polishing / buffing / painting as required as per existing drg or complete all as specified and directed.
2
-
-
... More
MATERIAL & LABOUR FOR SURFACE PREPARATION & PAINTING :- M&L for scrubbing and derusting, denting of de-shaped portion and applying one coat of red oxide primer and over it two coat of synthetic enamel paint (spray painting) of approved colour or as per existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Gloss or equivalent as approved and directed by engr-in-charge incl preparation of surface by repairing dents, defects on surface by straightening, hammering , buffing, grinding, polishing etc and applying putty or POP to make the surface smoooth before painting woork etc all as directed by Engr-in-charge including transporting , shifting , handling of furniture and equipment at the site and yard as required by contractors' own arrangement for the following :-
Rack side 3/4 space steel with tray / rack side steel
10
-
-
... More
Ditto all as per items No 302 above as applicable but for Rack Steel 6 tier Open / Close
15
-
-
... More
Ditto all as per items No 302 above as applicable but for Rack Steel 900X450X2400mm / 6' x 2' x 6' / 6' x 2' x 5'/ Rack store steel / Rack Stationary Steel
10
-
-
... More
Ditto all as per items No 302 above as applicable but for Rack Pigeon Hole Steel
6
-
-
... More
Ditto all as per items No 302 above as applicable but for Chair Lobby 3 Seater steel with arms/ chair visitor 3 seater
10
-
-
... More
Ditto all as per items No 302 above as applicable but for Stool Steel 2' / 510 mm height
5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements