Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date15 Dec 2023
Closing DateCancelled
Tender Amount₹ 38,79,000
Costs
EMD
₹ 77,596Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MES_630121_1Tender No
8300/1205/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://defproc.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
M&L for salt glazed stone ware drain pipe 150mm grade 'A' laid in trenches and jointed in CM (1:1) complete all as specified and directed.
80
-
-
M&L for salt glazed stone ware drain pipe 200mm grade 'A' laid in trenches and jointed in CM (1:1) complete all as specified and directed.
240
-
-
M&L for concrete bed to drain pipes 150mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate complete all as specified and directed.
75
-
-
M&L for concrete bed to drain pipes 200mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate complete all as specified and directed.
235
-
-
M&L for precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slabs of drains, manholes, septic tanks, soakage wells etc. including placing in position and set in CM (1:6) complete all as specified & as directed by Engineer-in-charge.
Note: - Reinforcement shall be measured and paid for separately.
2
-
-
M&L for PCC 1:4:8 type D-2, using 40mm graded stone aggregate in foundation , filling and mass concrete all as specified.
2
-
-
M/L TMT steel bars 6 to 8 mm dia TMT bars over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including mild steel wire (annealed ) not less than 0.90 complete all as specified and directed.
250
-
-
M&L for Construction of soakage wells of size 2.4M dia x 3.0M deep including excavation in any type of soil complete all as specified and shown on drawings. Note :- (i) Effective depth should be measured from inlet of pipe.
(ii) HQ CEJZ Drawing No TD/2004/S-35 Sheet 1/1.)
1
-
-
M&L Plain cement concrete type B1 (1:2:4), using 20 mm graded crushed stone aggregate,40 mm thick , as as in floor and finished even and smooth using extra cement laid in alternate bay and joints filled with bituminous compound grade 'A' complete all as specified and directed.
60
-
-
Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. complete all as specified and as directed.
480
-
-
M&L for rendering 15 mm thick in CM 1:4 including water proofing compound on fair face of brick or concrete surface,finished even and smooth without using extra cement complete all as specified and directed.
80
-
-
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM in (1:4) finished fair and even external surface complete all as specified and directed.
330
-
-
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.
210
-
-
Supply only Liquid water proofing compound of approved complete all as specified and directed.
4
-
-
Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-charge.
12
-
-
M&L for Brick work with sub class ‘B’ old size burnt bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-charge.
27.5
-
-
All as per Srl item No 24.00 here-in-before but except brick.
Note : Old serviceable brick retrieved from serial item No 4.00 of BOQ here-in-before shall be used under this item.
2
-
-
M&L for rendering dubbing coat over irregular surfaces of chajjas roof projections / ceiling / facia etc average 15mm thick in CM (1:4) over cement slurry coat @ 3Kg/Sqm making the surface even followed by 5mm thick rendering in CM (1:3) furnished even & smooth including making of drip course as required complete including roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed.
Note : Rate for form work if required to be included in the quoted rate by the contrator.
20
-
-
M&L for preparartion of new plastered surfaces of walls and applying two coats cement base paint on walls complete all as specified and as directed.
90
-
-
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer prepartory to distemper complete all as specified and directed.
90
-
-
M&L for complete removal of existing treatment and preparartion of old surfaces of walls and applying two coats of cement based paint on walls etc complete all as specified and as directed.
250
-
-
M&L for complete removal of existing treatment and preparation of old surface of walls and applying two coat of distemper oil emulsion distemper on wall incl applying a coat of wall care putty to achieve smooth finish to wall etc complete all as specified and directed.
180
-
-
M&L for preparation of old painted surface of any discpription and applying one coat of exterior emulsion paint of Dark Shade, complete all as specified and directed.
50
-
-
M & L for Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks etc.
1.5
-
-
M&L Moorum/red bajri filling in floors or pavings, laid in layers not exc 15 cm thick spread, levelled and rammed including watering complete all as specified.
25
-
-
M&L 75 mm thick Cement concrete type D-2, (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified and directed.
115
-
-
M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) in floors complete all as specified and directed.
70
-
-
M&L for sand filling under floors or in foundation complete all as specified and directed.
2
-
-
M&L for Machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.
33
-
-
M&L for cement concrete (1:2:4) type B2 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railigs upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, sligtly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.
2
-
-
M&L for pre-polished chequered tiles (any colour) of size 30cm x 30cm x 25mm thick, with gray cement & pigment set, jointed and pointed in neat cement slurry in floors laid over and including 20mm screed bedding in cement mortar (1:4) complete all as specified and directed.
12
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.
243
-
-
M&L for vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed bed in CM (1:4) complete all as specified and directed.
225
-
-
All as per item No 43.00 (here-in-before) above but as in skirting over 10mm thick backing coat in CM (1:3) complete all as specified and directed.
18
-
-
M&L Coloured Glazed ceramic tiles in vertical surface 450x300x7 mm with highlighter thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick plaster in cement mortar (1:3) complete all as specified and directed.
50
-
-
M&L for Non skid Ceramic coloured tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles exc0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:4 complete all as specified and directed.
18.5
-
-
Taking up or down steel tubing and connections of 15 mm bore pipe complete all as specified and as directed.
65
-
-
Taking up or down steel tubing and connections of 20 mm bore pipe complete all as specified and as directed.
70
-
-
M&L for 15 mm nominal bore Mild steel galvanised water tubing, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
50
-
-
M&L for 20 mm nominal bore Mild steel galvanised water tubing, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
50
-
-
Fixing only 15mm bore old galvanised steel water tubing including cleaning with & including new fittings and fixed complete to walls and ceilings or laid in floors in new or old position complete all as specified and directed by Engineer-in-charge.
Note :- GI tubing retrieved vide item No 40 shall be used under this item.
15
-
-
Fixing only 20mm bore old galvanised steel water tubing including cleaning with & including new fittings and fixed complete to walls and ceilings or laid in floors in new or old position complete all as specified and directed by Engineer-in-charge.
Note :- GI tubing retrieved vide item No 41 shall be used under this item.
20
-
-
Taking down chowkhats with shutter (without taking off shutters from the frame) area exc. 1.50 Sqm but n.exc 4.00 sqm each complete all as specified and directed.
6
-
-
Taking down chowkhats with shutter (without taking off shutters from the frame) area not exc. 1.50 Sqm each complete all as specified and directed.
14
-
-
Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each complete all as specified and as directed by Engineer-in-charge.
2
-
-
S&F 125x60mm pressed steel frames for doors with one or more rebates including necessary lugs, hinges lock, strike plate etc complete all as specified and as directed.
15
-
-
S&F Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
15
-
-
M&L for cement concrete type C-1, (1:3:6) using 20mm graded aggregate as in bed block or filling of chowkhats including necessary form work complete all as specified and directed.
0.25
-
-
S&F 35 mm thick factory made plain framed, panelled shutter (any number of panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood (Hollock or Bonsum) complete all as specified and directed by Engineer-in-charge.
10
-
-
S&F 35mm thick factory made glazed and skeleton shutters made of second class hard wood (Bonsum/Hollock), open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I Section 8 Clause 8.24 (a) kiln seasoned and chemically pressure treated fixed to chowkat complete all as specified and directed by Engineer-in-charge.
8
-
-
S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length jointed with adhesive fixed to walls fixed with and including requisite Number of clamps made out of flat iron 25x4mm complete all as specified and as directed by Engineer-in-charge.
6
-
-
S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length jointed with adhesive fixed to walls fixed with and including requisite Number of clamps made out of flat iron 25x4mm complete all as specified and as directed by Engineer-in-charge.
5
-
-
S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with solvent joints laid In trenches or in floors complete all as specified and directed by Engineer-in-charge.
15
-
-
S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with solvent joints laid In trenches or in floors complete all as specified and directed by Engineer-in-charge.
10
-
-
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified & shown in relevant drawing of item No. 08095 in MES Schedule (Part-II) and directed by Engineer-in-Charge.
10
-
-
S&F Factory Made Solid PVC Moulded Door Shutters 35 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 5mm thick Moulded colour PVC Sheet on the front Face & 5mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR complete all as specified and directed.
3.2
-
-
S&F 150mm long stainless steel handles, oval type complete all as specified and directed.
18
-
-
S&F 150mm stainless steel barrel tower bolts with bright bolt and fixed complete all as specified and directed.
18
-
-
S&F stainless steel butt hinges 100mm complete all as specified and directed.
6
-
-
S&F 300mm stainless steel sliding door bolts, bolt type with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
6
-
-
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom
and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, complete all as specified and directed by Engineer-in-Charge.
60
-
-
S & F powder coated Anodised aluminium Sliding door section, aluminium sections weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws Anodise aluminium fitting such as including hinges 100 mm long (2 no) and suitable handle(2 No) & including roller for sliding complete.
10
-
-
S & F 5mm thick coloured ACP (Aluminium composit Pannel) sheet using aluminium partition including joining cleats for fixing etc.(colour of sheet approved by GE).
30
-
-
S&F 5.5mm thick sheet glass light colour selected quality fixed in door / window shutter cut to required size, area exceeding 0.50 Sqm in each pane and including solar control film reflective type sticked to glass panes as per manufacturer's instructions complete all as specified & directed by Engineer-in-charge.
32
-
-
S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified & directed by Engineer-in-charge.
5
-
-
S&F Mortice latch with two levers (vertical type), aluminium, anodised body and fixed complete all as specified and directed.
1
-
-
S&F Factory made steel windows with side hung shutters including box type hinges with steel handle & steel peg stay complete with glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as specified and directed.
15
-
-
S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified & directed by Eng-in-charge.
1.5
-
-
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 sq.m. in each pane complete all as specified and directed.
14
-
-
S&F 3 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and directed.
2
-
-
S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, cooler stand 12mm sq guard bar, framework of water tanks and similar works of quality Fe 290 (Gde E-165) etc complete all as specified and directed by Engineer-in-charge.
200
-
-
M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge.
195
-
-
M&L for applying a coat of two component elastomeric acrylic polymer modified cementitious water proofing coating, having properties of 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and sprinkle sand at 10-15 gram per sqft for better grip with plaster complete all as specified and directed.
40
-
-
M&L for preparation of steel surface already treated with primer over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
10
-
-
S&F in repairs vitreous china urinal Half stall type, white incl CP spreader screwed for iron pipe and fixed complete including providing and fixing plugs with and including 60mm long brass screws, pointed around urinal back in cement, fixing discharge pipe, flush pipe, grating and union for discharge complete all as specified and directed.
2
-
-
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with PVC sheet cover & 'P' OR 'S' trap complete all as specified and directed.
1
-
-
S&F CP Jet spray butter fly design fixed on EWC with stanless screw as approve complete all as specified and directed.
2
-
-
S&F in repair health faucet 2 in 1 with 1.5 mtr tube and hook of same complete all as specified and directed.
1
-
-
S&F in repair vitreous china squatting pan Orissa pattern, white of size 580x440mm with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, PCC filling and connection to trap and flushing pipe, antisyphonage pipe etc complete all as specified and directed by Engineer-in-charge.
1
-
-
S & F in repairs PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32mm bore and connection to WC pan complete all as specified and directed.
2
-
-
S & F in repairs Wall hung vitrous china wash hand basin with full pedestal size 550 x 400 mm screwed shank fly nut flange end including brackets and cutting for and pinning of hole including 32 mm dia chromium plated waste coupling and bottle trap complete all as specified and directed.
3
-
-
S&F in repair Glass shelf 450mm long x 100 mm wide including brackets fixed to wall with sleeves and screws complete all as specified and directed.
2
-
-
S&F in repair PVC bathroom cabinet mirror 450 x 350 mm complete all as specified and as directed.
2
-
-
S&F in repair bib taps cast copper alloy with screwed down for iron pipe or brass ferrule and fixed fancy type chromium plated 15 mm bore complete all as specified and as directed.
12
-
-
S&F in repair pillar taps 15mm bore cast copper alloy fancy type with capstan heads chromium plated scre-wed down high pressure with or without lettered hot' or'cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
3
-
-
S&F in repairs 15mm bore angle cock one way fancy type, chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and as directed.
8
-
-
S&F in repair two way angle cock, fancy type, chromium plated 15 mm bore screwed down, high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.
2
-
-
Dismantling of AC (corrugated or semi corrugated etc) sheets in roof covering complete all as specified and directed.
1890
-
-
M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.
70
-
-
M & L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.
1820
-
-
Dismantling timber scantlings 40 sq. cm and over in section in framed work, in any position complete all as specified and directed.
2.8
-
-
S&F steel work in tubular trusses including columns, special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1998 grade St-240 complete all as specified and directed.
3873
-
-
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
795
-
-
M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section ( not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm including providing and fixing designer decorative non asbestos sheet board 4mm thick complete all as specified and directed.
795
-
-
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed.
8.7
-
-
M&L for 75mm thick cement concrete type C-2, (1:3:6) using 20mm graded stone aggregate as plinth protection and finished surface even and smooth without using extra cement complete all as specified and directed.
49
-
-
S&F hollow corrugated shape PVC wall lining consisting of 5mm thick decorative colour PVC sheet inclusive of solvent cement and fixing and incl beading at sides on PVC frame as per specifications all as specifed complete all as specified and directed.
50
-
-
Taking down carefully or drawing out from conduit, existing copper / aluminium point wiring for light, fan, bell, socket, power point etc complete including fixture and fittings and making good the disturbed surfaces of wall/ceiling complete all as specified and as directed by Engineer-in-charge.
107
-
-
Material and labour for concealed type point wiring for light/fan with 2.5sq mm FR-LSH PVC insulated, unsheathed, single core multistranded copper conductor cable 1100 volts grade, conforming to IS 694 including 2.5 Sq mm FR-LSH PVC insulated unsheathed copper conductor wire as earth continuity conductor drawn through and including medium grade PVC rigid conduit not less than 20 mm dia with its accessories, galvanized pressed steel terminal boxes of thickness not less than 1.2 mm including 3mm thick laminated sheet cover with brass machine screw, washer, lugs for earthing etc and slot cutting in sheet for fixing switches/ socket/regulators etc complete all as specified and as directed.
Note:- (i) On RCC ceiling/column, false ceilling, AC/Metallic Sheet ceilling wiring to be done on surface with conduit/PVC casing capping and its accessories or in existing recessed conduit. (ii)The quoted rate is deemed to be included for the cutting & chasing.
(iii) Cutting chases on wall for concealed the conduit shall be made good using CM 1:4 and surface finished to match the existing surface & colour and rate is deemed to be included.
(iv) Maximum 08 nos of light/fan/bell points (not more than 2x6A sockets ) will have to be provided in each circuit from main MCB DB & Only 01 power point (Socket-outlets, 16 A) will have to be provided in each circuit from main MCB DB.
69
-
-
All as per Serial Item No 102.00 above here-in-before but one socket out let 5 pins 5 Amp on the independent board complete all as specified and directed.
12
-
-
All as per Serial Item No 102.00 above here-in-before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.
8
-
-
Material and labour for concealed type point wiring for light/fan with 2.5 sq mm FR-LSH PVC insulated, unsheathed, single core multistranded copper conductor cable 1100 volts grade, conforming to IS 694 including 2.5 Sq mm FR-LSH PVC insulated unsheathed copper conductor wire as earth continuity conductor drawn through and including medium grade PVC rigid conduit not less than 20 mm dia with its accessories, galvanized pressed steel terminal boxes of thickness not less than 1.2 mm including 3mm thick laminated sheet cover with brass machine screw, washer, lugs for earthing etc and slot cutting in sheet for fixing switches/ socket/regulators etc complete all as specified and as directed.
Note:- (i) On RCC ceiling/column, false ceilling, AC/Metallic Sheet ceilling wiring to be done on surface with conduit/PVC casing capping and its accessories or in existing recessed conduit. (ii)The quoted rate is deemed to be included for the cutting & chasing.
(iii) Cutting chases on wall for concealed the conduit shall be made good using CM 1:4 and surface finished to match the existing surface & colour and rate is deemed to be included.
(iv) Only 01 power point (Socket-outlets, 16 A) will have to be provided in each circuit from main MCB DB.
10
-
-
Material and labour for concealed type point wiring for light/fan with 4 sq mm FR-LSH PVC insulated, unsheathed, single core multistranded copper conductor cable 1100 volts grade, conforming to IS 694 including 4 Sq mm FR-LSH PVC insulated unsheathed copper conductor wire as earth continuity conductor drawn through and including medium grade PVC rigid conduit not less than 20 mm dia with its accessories, galvanized pressed steel terminal boxes of thickness not less than 1.2 mm including 3mm thick laminated sheet cover with brass machine screw, washer, lugs for earthing etc and slot cutting in sheet for fixing switches/ socket/regulators etc complete all as specified and as directed. Note:- (i) On RCC ceiling/column, false ceilling, AC/Metallic Sheet ceilling wiring to be done on surface with conduit/PVC casing capping and its accessories or in existing recessed conduit. (ii)The quoted rate is deemed to be included for the cutting & chasing.
(iii) Cutting chases on wall for concealed the conduit shall be made good using CM 1:4 and surface finished to match the existing surface & colour and rate is deemed to be included.
(iv) Maximum 08 nos of light/fan/bell points (not more than 2x6A sockets ) will have to be provided in each circuit from main MCB DB & Only 01 power point (Socket-outlets, 16 A) will have to be provided in each circuit from main MCB DB.
8
-
-
M&L for Sub main wiring with 2 runs of 6 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable drawn through and in existing surface / recessed PVC conduit and connecting incoming/outgoing electric connections and one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable as earth conductor including taking down old unsv submain wiring and making good the disturbed surfaces complete all as specified and directed. Note: Two runs of 6 Sqmm cable, one run of 6 Sqmm earth conductor and one run of PVC conduit of 32mm dia shall be measured and paid as one unit length.
90
-
-
S&F switch piano flush button single pole, one way 6 Amp 240 Volt complete all as specified and directed.
89
-
-
S&F switch piano flush button single pole, one way 16 Amp 240 Volt complete all as specified and directed.
10
-
-
S&F socket 6 amps 5 pin flush type, 230 volts complete all as specified and directed.
20
-
-
S&F socket out let, 6 pin 6 and 16 amps multi purpose 2 in 1 flush type 230 volt complete all as specified and directed.
10
-
-
S&F in replacement sheet metal enclosure Single pole & neutral with 2 pin and earth plug and socket 20A 240 Volt complete with one single pole MCB of cap 20/25 A, C series complete all as specified and directed.
8
-
-
S&F ceiling rose 63x30 mm three terminal, polycorbonate body complete all as specified and directed.
41
-
-
SS&F fan regulator electronic, five step type hum free suitable control speed of fan from 0 to 100% and connecting electrically all as required complete all as specified and directed.
10
-
-
S&F Angle/ batten holder polycorbonate type body suitable for batten fitting complete all as specified and directed.
4
-
-
S&F LED bulb of capacity 10/12 watts not less than 700 lumens output at 6500K colour temp, complete all as specified and directed.
4
-
-
Supply & fixing tube light fitting with surface and wall mounted decorative ultra slim round profile LED lighting fixture, 20 watt LED with entruded polycarbonate, environment friendly, energy efficient ready to use with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.
20
-
-
Supply & fixing bulk head decorative LED light fitting of 10 W, IP - 66, environmental friendly, ultra modern, energy saving, surface mounted complete all as specified and as directed.
6
-
-
Supply & fixing tube light fitting with surface and wall mounted decorative ultra slim round profile LED lighting fixture, 10 watt LED with entruded polycarbonate, environment friendly, energy efficient ready to use with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.
5
-
-
Supply & fixing in replacement security light with LED street light, 30 Watt, IP - 66, Impact resistance - IK07, colour temp- 5700 K, Class-I in pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management, sturdiness, excellent corrosion resistant, separate optical and control gear compartment & top opening for easy maintenance. Polyster powder coated grey after phosphochromate treatment High efficiency long life LED modules with SMD LED package mounted on MCPCB. Lumen efficacy of LED 110 lm/W with PC lens to ensure better uniformity of light distribution. Powered by Built-in, Potted electronic LED driver (SMPS based constant current supply) with lower THD, Output Open Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection upto 10 kV with external SPD & other safety tests as per IS 15885 Part-2/ Sec13 alongwith arm with single arm bracket OD 58 mm (max) with clamp, nut, bolts etc mounted on wall complete in all respect complete all as specified and directed.
8
-
-
Supply & fixing in replacement sheet metal enclosure MCB distribution board triple pole & neutral 415 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
1
-
-
Supply & fixing in replacement sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
3
-
-
Supply & fixing in replacement of MCB single pole 240 volt any rating from 6 to 32 amps, C series with rupturing capacity 10 KA complete all as specified and directed.
18
-
-
Supply & fixing in replacement of MCB Single Pole Neutral 240 volt any rating from 6 to 32 amps, C series with rupturing capacity 10 KA complete all as specified and directed.
3
-
-
Supply & fixing in replacement MCB SPN, 240 Volts, 40 Amps breaking capacity 10 KA (type B curve) all as specified and directed
12
-
-
Supply & fixing in replacement MCCB, 100 Amp, 4 Pole, 16 KA, adjustable thermal & fixed magnetic setting complete all as specified and as directed.
1
-
-
Supply and fixing BLDC ceiling fans, 5 star rated by Bureau of energy with service value of not less than 8.40, (26W±10%) with or without remote, with rated speed 350 Rev per min, air delivery 220 Cum/min complete with blades, down rods, electronic regulator and accessories, 230 volt, 1200 mm sweep, suitable for single phase supply complete all as specified and directed.
10
-
-
S&F in replacement LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
8
-
-
Supplying, laying, jointing, commissioning and testing XLPE insulated screened PVC bedded, armoured, heavy duty electric cable with stranded aluminium conductor 1100 volts grade of cross sectional area 16 sq mm 4 core confirming to IS-7098 (Part-I-1988) laid through wall / floors / on panels etc complete all as specified and directed by Engineer-in-charge.
50
-
-
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt, connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI pipe 20mm light grade for water filling including 15x20mm reducer socket funnel wire mesh, RCC cover with concrete 1:2:4 using 8 mm# bar@100 mm c/c both ways ,PCC chamber pit with PCC (1:3:6) type C-2 and excavation and earth work,disposal of suplus spoil to a dstance not exceeding 50mtrs all as specified and shown on electrical plate No. 3 of 2009 (Part-I) complete including taking down old unserviceable earthing complete all as specified and directed. Note :- The unit rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 7.5 meter above ground level.
2
-
-
Supply and fixing Exhaust fan metallic body of size 300 mm sweep, 50 Hz, AC 240Volt, 900 RPM, dynamically balanced impellers for smooth & vibration free operation, pre-lubricated double ball bearing for maintenance free running with aerodynamically designed & balanced blade, air delivery 1275 Cum/hr, noise level 40dB- 45dB and power consumption (50 W±10%) heavy duty single phase supply including mild steel louvers all as specified and directed.
8
-
-
Supply and fixing Geyser 25 ltr capacity in 5 Star rating, digital display, feather touch panel, shock safe plug, incoloy glass coated element, feroglass technology, PUF insulation 0.8 Mpa high working pressure, Whirlflow technology, IPX-4 protection suitable for, 50 Hz, AC 240Volt, single phase supply, white blue with overall length approx 620 mm with wall mounting accessories & 02 Nos SS-304 connections 600 mm long complete all as specified and directed.
8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements