Military Engineer Services Tender

Supply & spreading local sand obtained from ganga river in trenches for cable cushioning complete all as specified and directed.

Supply & laying /paving of dry well burnt bricks of sub class ‘B’ laid flat of whole brick over the cable after spreading the sand for cable protection complete all as specified and directed.

Cutting & Chasing required on concrete block /path/tile /floor/ wall not exceeding 20 cm girth to concealed the cable/GI wire and making good to disturbed surface with cement mortar 1:3 including facing / finishing where as required to match with existing surfaces complete all as specified and directed.

Taking out unserviceable cable any type from trenches,pole, road,duct etc including necessary joints(U/S)fittings and pipes etc complete all as specified and directed

Supply & fix in replacement of GI tubing light grade 40 mm dia with all fitting and fixed complete to wall laid in trenches floor, road crossing and fixing arrangement complete for under ground cable protection including such as MS flats iron clamp nut & bolts washers all as directed and specified.

Supply and laying in trenches /on wall/duct/drawn through conduit XLPE insulated, armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional are 10 Sqmm 2 core complete all as specified and directed

Supply and laying in trenches /on wall/duct/drawn through conduit XLPE insulated, armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional are 16 Sqmm 2 core complete all as specified and directed

Supply, fixing and testing in replacement of Old unserviceable/ worn out flood light fitting by LED flood light 150/170 watt 240 volt with secondary optics made in pressure die cast housing a LED flood light high efficiency in built integrated electronic LED driver complete with IP 65/66 protection complete all as specified and directed including all accessories complete.

Supply, fixing and testing in replacement of Old unserviceable/ worn out flood light fitting by Turbo LED flood light 120 Watt, 240 volt with secondary optics made in pressure die cast housing and heat sink in aluminium extursion with IP 66 protection high efficiency in built integrated electronic LED driver complete with IP 65/66 protection complete all as specified and directed including all accessories complete.

Supply and fixing in replacement of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete .

Supply and fixing in replacment of LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing in replacment LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed including all accessories complete .

Supplying and fixing in replacment of 1100 volts grade heavy duty cable PVC insulated aluminium solid conductor of size 6 sqmm , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified.

All as per serial item No. 17.00 but for twin core cable of size 10 sqmm.

S&F in replacement of old U/S eixting street Light Timer complete with new Automatic street light Control panel with Infrared Sensor based Nature switch based on natural light lux level with suitable power Contactor,MCB and should be enclosed in pole/wall mountable enclosure made of Rust proof,Electric shock proof, Termite proof and FR grade special polycarbonate enclosure conforming to IP66 having both sensor and manual operation option. The contactors, MCBs and circuit wiring should suitable enough to take load of 8 KW per phase , 3 phase, 415 Volts A/C complete all as specified.

All as per serial item No. 19.00 but for single phase, 230 volts supply Timer switch panel for load upto 8 KW.

Disconnecting and taking out existing junction box of any description and in any position on poles or fixed in the plinth of poles and supplying and fixing in position new MS Sheet/ CRCA sheet junction box with hinged cover system, corrosion resistant, waterproof, duly painted with two coats of synthetic enamelled paint over a coat of red oxide primer of approx size 250mm X 200mm. The box shall be provided with and including 10 cm long aluminium bus bar of size 20x3 mm size 2 Nos mounted on porcelain insulators including one No. MCB SP of ‘C’ series, 5/6 Amps of Make Legrand/L&T/ Siemens and connecting the bus bars to cables with using suitable GI nut, bolts and washers and aluminium lugs etc fixed on pole using 30x5 mm clamps, nuts, bolts & washers etc complete all as specified and directed by Engineer-in-Charge. Note :- The contractors quoted rates for the above items are deemed to include for fixing the box in position with suitable MS clamps and/or necessary PCC as per site requirement.

Supply & fixing bldg/pole light bracket made out 32 mm dia bore G.I pipe, light grade of length not less than 1.5 Mtr, bend to required shape for holding the fitting including Clamps 50x6 mm Flate Iron ,Nut & Bolts for supporting the brackets and taking down the old bracket from existing pole/building.

M&L for preparing scraping the old painted surfaces and applying one coat of aluminium paint on steel tubular swaged poles and swan neck /bracked, chanels/angles including making/pasting three nos cricular strips of 300 mm wide yellow & black colour with synthetic reflected enamel paint and marking /stencil writing of pole numbers with black paint complete and all as specified and directed.

Trimming/cutting of all trees branches and cleaning of bushes around the overhead conductor span upto 3.0 mtr distance both side from nearest conductor/Earth wire at LT overhead line including cleaning of site and removing trimmed material upto 1km distance all as directed at site by Engineer-in-Charge

Disconnection, taking down and opening for replacement of unserviceable parts such as drivers including changing connecting wires, cleaning, removing carbon from joints and refixing after rectification of defects of street lights /security lights/post top lantern/flood lights any type, size, capacity to poles/sentry posts/top of buildings complete all as specified and directed. Note : Cost of drivers replaced should be paid serarately under their relevant items.

Supply only in replacement MCB SP 6 to 32 Amps 10 KA 'C' Series, 240 V all as specified.

Supply and fix PVC spiral spacers for 3 wire LT overhead lines complete all as specified and direected by Engineer-in-Charge.

Supply only Drivers for 60/ 70 watt LED Fitting all as specified and directed at site.

Supply only Drivers for 90/100 watt LED Fitting all as specified and directed at site.

Supply only Drivers for 150 watt LED Fitting all as specified and directed at site.

Supply only Drivers for 200 watt LED Fitting all as specified and directed at site.

Material and labour for repair of LED glow sign board any size including replacement of acralic/PVC sheet, letters any type and fixing with glue, including driver if required at site complete testing and fixing at existing location all as required and directed.