Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Electrical Works
Eprocure
Opening Date23 Nov 2024
Closing Date14 Dec 2024
Tender Amount₹ 50,00,000
Costs
EMD
₹ 1,00,000Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Maint And Repairs Of Dg Sets, Sewage Treatment Plant And Lift Wells And Allied
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_685374_1Tender No
94152/MRT/2024-25/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
MAINT AND REPAIRS OF DG SETS, SEWAGE TREATMENT PLANT AND LIFT WELLS AND ALLIED WORKS UNDER AOR OF AGE E/M-I UNDER GE (NORTH) MEERUT CANTT
BOQ Items
All as per Srl item No 01.00 above but Cap 193M³/ Hr with 7.5HP motor complete all as specified and directed.
2
-
-
All as per Srl item No 01.00 above but Cap 49M³/ Hr with 3HP motor complete all as specified and directed. Note for Item No. 1.00 to 4.00:- (i) Spare parts will be deemed to be included in above quoted rate, like Injection rings,distance ring, pressing ring, O-ring, tensioning element,oil seal, splash guard, intermediate guard, lock nuts and gaskets, washers, nut bolts etc .
(ii) Spare parts like Bearing/bushes Lube oil for compressor, V belts will be measured and paid seperately under relevant item of Sch A.
2
-
-
Supply only Ball bearing suitable for above Air compressor of 600 M3/Hr, 20HP capacity complete all as specified and directed.
3
-
-
Supply only Ball bearing suitable for above Air compressor of 515 M3/Hr, 15HP capacity complete all as specified and directed.
2
-
-
Supply only Ball bearing suitable for above Air compressor of 515 M3/Hr, 7.5HP/5 HP capacity complete all as specified and directed.
2
-
-
Supply only Lube oil for Air compressor (air blower) Servo 320 complete all as specified and directed.
75
-
-
Supply only 'V' belt suitable for above Air compressor of 600 M3/Hr, 20HP capacity complete all as specified and directed.
4
-
-
Supply only 'V' belt suitable for above Air compressor of 515 M3/Hr, 15HP capacity complete all as specified and directed.
2
-
-
Supply only 'V' belt suitable for above Air compressor of 515 M3/Hr, 7.5HP/5 HP capacity complete all as specified and directed.
3
-
-
M&L removing the submersible pump set (non clog) from existing position, Shifting to authorized workshop for repair work, dismantle / open, removing the burnt winding, cleaning rotor / stator, re-winding the motor with F class insulation super enameled copper wire of size equivalent to the original winding including insulated packing materials, Varnishing, Drying, including replacement of both water seal, fill with new lube oil upto required level etc., checking of seat and replacement of seat ring ,checking for smoothness of motor running and clearance between impeller and casing ring and casing cover re-assembling the pumpset, installing back to the original position, testing and commissioning by thorough checking of electric circuit for proper protection of motor and run on full load for 4 hrs continuous running for the motor capacity of upto 3HP of any make with a warranty/guarantee of 06 months and the contractor rewinding the same without any extra cost to the deptt from the date of completion of testing hours complete all as specified and directed.
3
-
-
All as per Srl item No 13.00 here-in-before but of 4.0 HP to 7.5 HP capacity complete all as specified and directed.
5
-
-
All as per Srl item No 13.00 above but of 10HP to 15 HP capacity complete all as specified and directed.
5
-
-
All as per Srl item No 13.00 above but of 20HP to 25HP capacity complete all as specified and directed.
2
-
-
All as per Srl item No 13.00 above but of 30HP upto 40HP capacity complete all as specified and directed.
Note for Item No. 13 to 17:- (i) Spare parts will be deemed to be included in above quoted rate, like gun metal neck ring, water seal compound and rubber bushes, and gaskets, washers, nut bolts etc .
(ii) Spare parts like Bearing/bushes, impeller will be measured and paid seperately under relevant item of Sch A.
1
-
-
Supply only Non clog impeller suitable for and upto 3HP submersible pump set complete all as specified and directed.
3
-
-
All as per Srl item No 18.00 above but of 5.0 HP to 7.5 HP capacity complete all as specified and directed.
3
-
-
All as per Srl item No 18.00 above but of 10HP to 15 HP capacity complete all as specified and directed.
3
-
-
All as per Srl item No 18.00 above but more than 15HP upto 20HP complete all as specified and directed.
2
-
-
All as per Srl item No 18.00 above but more than 25HP upto 30HP complete all as specified and directed.
2
-
-
All as per Srl item No 18.00 above but of 30HP upto 40HP capacity complete all as specified and directed.
1
-
-
Supply only upper/lower or back to back roller or Ball bearing suitable for and upto 3HP non clog submersible pump/Mono block pump set set complete all as specified and directed.
6
-
-
All as per Srl item No 24.00 above but more than 3HP upto 5HP complete all as specified and directed.
2
-
-
All as per Srl item No 24.00 above but of 5.0 HP to 7.5 HP capacity complete all as specified and directed.
2
-
-
All as per Srl item No 24.00 above but 7.5HP upto 10HP complete all as specified and directed.
2
-
-
All as per Srl item No 24.00 above but of 10HP to 15 HP capacity complete all as specified and directed.
5
-
-
All as per Srl item No 24.00 above but of 20HP to 25HP capacity complete all as specified and directed.
3
-
-
All as per Srl item No 24.00 above but of 30HP upto 40HP capacity complete all as specified and directed.
2
-
-
Supply only Stainless steel bush suitable for and upto 3HP non clog submersible pump set complete all as specified and directed.
2
-
-
All as per Srl item No 31.00 above but of 5.0 HP to 7.5 HP capacity complete all as specified and directed.
3
-
-
All as per Srl item No 31.00 above but of 10HP to 15 HP capacity complete all as specified and directed.
2
-
-
All as per Srl item No 31.00 above but of 20HP to 25HP capacity complete all as specified and directed.
2
-
-
All as per Srl item No 31.00 above but of 30HP upto 40HP capacity complete all as specified and directed.
2
-
-
M&L for dismantling and removing the motor of the mono block / coupled Pump set or Air compressor from existing position, Shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator, re-winding the motor with super enameled copper wire of size equivalent to the original winding including insulated packing materials, Varnishing, Drying etc and installing back to the original position, testing and commissioning by thorough checking of electric circuit for proper protection of motor and run on full load for 4 hrs continuous running for the capacity of motor upto 3HP of any make with a warranty/guarantee of 06 months and the contractor rewinding the same without any extra cost to the deptt from the date of completion of testing hours complete all as specified and directed.
2
-
-
All as per Srl item No 36.00 above but more than 3HP upto 5HP complete all as specified and directed.
2
-
-
All as per Srl item No 36.00 above but more than 5HP upto 7.5HP complete all as specified and directed.
2
-
-
All as per Srl item No 36.00 above but more than 7.5HP upto 10HP complete all as specified and directed.
2
-
-
All as per Srl item No 36.00 above but more than 10HP upto 15HP complete all as specified and directed.
2
-
-
All as per Srl item No 36.00 above but more than 15HP upto 20HP complete all as specified and directed.
1
-
-
All as per Srl item No 36.00 here-in-before but more than 20HP upto 30HP complete all as specified and directed.
1
-
-
M&L for Dismantling and removing the mono block / Coupled pump set from the existing position after disconnecting the inlet/outlet pipe connections, disconnecting the electric supply cables and transporting to repair work shop complete, opening the pump side, servicing the pump set including cleaning the shaft including replacement of worn out bearing, bushes, check nut, shaft sleeves etc. and installing back to the original position, testing and commissioning on full load for 4 hrs continuous running for the capacity of pump upto 3HP complete all as specified and directed.
4
-
-
All as per Srl item No 43.00 above but more than 3HP upto 5HP complete all as specified and directed.
2
-
-
All as per Srl item No 43.00 above but more than 5HP upto 7.5HP complete all as specified and directed.
1
-
-
All as per Srl item No 43.00 above but more than 7.5HP upto 10HP complete all as specified and directed.
2
-
-
All as per Srl item No 43.00 above but more than 10HP upto 15HP complete all as specified and directed.
2
-
-
All as per Srl item No 43.00 above but more than 15HP upto 20HP complete all as specified and directed.
2
-
-
All as per Srl item No 43.00 above but more than 25HP upto 30HP complete all as specified and directed.
Note for Item No. 43.00 to 48.00:- (i) Spare parts will be deemed to be included in above quoted rate, like gun metal neck ring, rubber coupling/metal coupling and rubber bushes, and gaskets, washers, nut bolts etc .
(ii) Spare parts like Bearing/bushes, impeller will be measured and paid seperately under relevant item of Sch A.
1
-
-
Supply only brass bush of suitable size for and upto 3HP mono block/Coupled pump set complete all as specified and directed.
2
-
-
All as per Srl item No 50.00 here-in-before but more than 3HP upto 5HP complete all as specified and directed.
2
-
-
All as per Srl item No 50.00 above but more than 5HP upto 7.5HP complete all as specified and directed.
2
-
-
All as per Srl item No 50.00 above but more than 10HP upto 15HP complete all as specified and directed.
2
-
-
All as per Srl item No 50.00 above but more than 15HP upto 20HP complete all as specified and directed.
2
-
-
All as per Srl item No 50.00 above but more than 25HP upto 30HP complete all as specified and directed.
1
-
-
Supply only new impeller of suitable size for and upto 3HP mono block / Coupled pump set complete all as specified and directed.
2
-
-
All as per Srl item No 56.00 here-in-before but more than 3HP upto 5HP complete all as specified and directed.
1
-
-
All as per Srl item No 56.00 here-in-before but more than 5HP upto 7.5HP complete all as specified and directed.
1
-
-
All as per Srl item No 56.00 here-in-before but more than 7.5HP upto 10HP complete all as specified and directed.
2
-
-
All as per Srl item No 56.00 here-in-before but more than 10HP upto 15HP complete all as specified and directed.
2
-
-
All as per Srl item No 56.00 here-in-before but more than 15HP upto 20HP complete all as specified and directed.
2
-
-
All as per Srl item No 56.00 here-in-before but more than 25HP upto 30HP complete all as specified and directed.
2
-
-
M&L in repairs for Gland packing of thickness upto 14mm complete all as specified and directed.
3
-
-
M&L in repairs Air Release valve, suitable size for mono block / Coupled pump set, made out of brass, as per site complete all as specified and directed.
3
-
-
M&L for cleaning and desiIting the sewage lift well of capacity 70 to 100 Cum, dewatering the complete well, removing All the deposited sludge, soil and other material from the well including bailing / pumping out muddy water from the well by manually or by providing suitable pump sets from bottom level of well, scrapping out the scales / deposits from inner surface of the well throughly, washing with bleaching powder and soda ash, cleaning / bailing out settled materials completely by any means and removing sludge to a distance up to 3 km out side of defence land limit and dispose off in low lying area including dewatering as required including whitewash the inner side of sump, painting with existing color on outside & writing 'Tank cleaned on ......(date) with 10 cm size white letter on black surface by engaging skilled artist using first quality synthetic enamel paint complete all as specified and directed.
3
-
-
All as per Srl item No 65.00 here-in-before but more than 100 CuM upto 200 CuM capacity lift well complete all as specified and directed.
4
-
-
All as per Srl item No 65.00 above but more than 200 CuM upto 350 CuM capacity lift well complete all as specified and directed.
1
-
-
All as per Srl item No 65.00 above but for Equilisation tank of 300 to 400 Cum capcity complete all as specified and directed.
2
-
-
All as per Srl item No 65.00 above but for Equilisation tank of 150 to 200 Cum capcity complete all as specified and directed..
1
-
-
All as per Srl item No 65.00 above but cleaning of complete Stilling chamber, Coarse screen chamber, Grit chamber upto 10 Cum capacity complete all as specified and directed.
2
-
-
All as per Srl item No 65.00 here-in-before but MBBR tank of volume more than 50Cum to 100Cum complete all as specified and directed.
2
-
-
All as per Srl item No 65.00 here-in-before but MBBR tank of volume more than 25 Cum to 50 Cum complete all as specified and directed.
2
-
-
All as per Srl item No 65.00 here-in-before but STP secondary tube settler tank of volume 200 Cum at SRC complete all as specified and directed.
1
-
-
All as per Srl item No 65.00 here-in-before but STP secondary tube settler tank of volume upto 112 Cum complete all as specified and directed.
2
-
-
All as per Srl item No 65.00 here-in-before but Sludge tank of size 10mx10mx4.5m complete all as specified and directed.
1
-
-
All as per Srl item No 65.00 here-in-before but Sludge tank of volume upto 115 Cum complete all as specified and directed.
2
-
-
All as per Srl item No 65.00 here-in-before but STP CC tank(Chlorine contact) upto 25Cum complete all as specified and directed.
2
-
-
All as per Srl item No 65.00 here-in-before but Treated water tank of upto 20 Cum capacity complete all as specified and directed.
1
-
-
All as per Srl item No 65.00 here-in-before but Treated water tank of size 15mx15mx4mtr apprx complete all as specified and directed.
Note for item No 65.00 to 78.00 :- Contractor is to arrange his own diesel pump, T&P etc for cleaning purpose and minor spares and consumables like small screws, washers, grease, cleaning agents, consumables etc. is deemed to be included in the cost. The unit rate quoted deemed to be including draining of water with mechanical equipment and working in water and mud etc. The unit rate quoted deemed to be include All safety precautions which shall be taken while working in STP tank / under ground sump. Making good to the damages during the cleaning of the tank is sole responsibilty of the firm.
1
-
-
M&L for opening of all the inspection door of existing Dual Media filter of size 3050 x 2800mm and Activated carbon filter of size 3150 x 2800 mm, taking out / removing the existing totally impregnated / out lived internal filling filter media, layer wise, without any mixing of each other layer, cleaning the entire filter throughly and painting with two coats of epoxy based anti corrosive paint internally and two coats of synthetic enamel paint externally, and segregation of filter media received from DMF / ACF, opening of Header strainer pipe SS wire mesh for filtration of waste water received from chlorine contact tank (sewage treatment plant) cleaning of strainer pipe and incl replacement of worn out pipe of same size and fixing of cleaned filter media in layers and setting back the filters for its proper function and testing complete all as specified and directed.
1
-
-
M&L for opening of all the inspection door of existing Dual Media filter of capacity suitable upto 730 KLD STP, taking out / removing the existing totally impregnated / out lived internal filling filter media, layer wise, without any mixing of each other layer, cleaning the entire filter throughly and painting with two coats of epoxy based anti corrosive paint internally and two coats of synthetic enamel paint externally, and segregation of filter media received from DMF, opening of Header strainer pipe SS wire mesh for filtration of waste water received from chlorine contact tank (sewage treatment plant) cleaning of strainer pipe and incl replacement of worn out pipe of same size and S&F of new filter media as per existing pattern with suitable quantity media in (cum) of different layers of fine sand ,coarse silex aggregate and filtration sand and setting back the filters for its proper function and testing complete all as specified and directed.
1
-
-
M&L in repairs for 300mm dia ERW MS Pipe including specials, as per IS not less than 5.4 mm thick duly painted with 2 coats of Anti Corrossive Synthetic enamel paint over a coat of Zync Chromate complete incl necessary welding works etc. complete all as directed. Make:- Tata/Jindal/Surya Roshni Ltd
8
-
-
All as per Srl item No 82.00 above but 200 mm dia complete all as specified and directed. Make:- Tata/Jindal/Surya Roshni Ltd
15
-
-
All as per Srl item No 82.00 above but 150 mm dia complete all as specified and directed. Make:- Tata/Jindal/Surya Roshni Ltd
30
-
-
All as per Srl item No 82.00 above but 100 mm dia complete all as specified and directed. Make:- Tata/Jindal/Surya Roshni Ltd
20
-
-
M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars of bore of pipe 200mm dia complete all as directed
10
-
-
M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars of bore of pipe 300mm dia complete all as directed
12
-
-
M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars of bore of pipe 400/450mm dia complete all as directed.
Note:- Earth work will be measured and paid seperately under relevant items of sch.
12
-
-
M&L in repairs for 20mm bore GI tubing medium grade incl all fittings cutting and threaded in any length laid in trenches or fixed to walls complete all as specified and directed. Make:- Tata/Jindal/Surya Roshni Ltd
120
-
-
All as per Srl item No 89.00 here-in-before but 25 mm dia complete all as specified and directed. Make:- Tata/Jindal/Surya Roshni Ltd
80
-
-
All as per Srl item No 89.00 above but 40 mm dia complete all as specified and directed. Make:- Tata/Jindal/Surya Roshni Ltd
50
-
-
All as per Srl item No 89.00 above but 80 mm dia complete all as specified and directed. Make:- Tata/Jindal/Surya Roshni Ltd
35
-
-
M&L in repairs for HDPE pipe of pressure rating 10 Kgf / Sqcm incl all fittings in any length with fusion joint laid in trenches / fixed to walls all as directed of size 100mm bore complete all as specified and directed. Make:- Astral Ltd (Brand-HDPE Pro)/Finolex/RC Plasto Tanks & Pipe Pvt Ltd
45
-
-
All as per Srl item No 93.00 above but 80mm bore complete all as specified and directed. Make:- Astral Ltd (Brand-HDPE Pro)/Finolex/RC Plasto Tanks & Pipe Pvt Ltd
25
-
-
All as per Srl item No 93.00 above but 50mm bore complete all as specified and directed. Make:- Astral Ltd (Brand-HDPE Pro)/Finolex/RC Plasto Tanks & Pipe Pvt Ltd
20
-
-
All as per Srl item No 93.00 above but 25mm bore complete all as specified and directed. Make:- Astral Ltd (Brand-HDPE Pro)/Finolex/RC Plasto Tanks & Pipe Pvt Ltd
25
-
-
S&F in repairs for hand gear butterfly valve with CI Disc and neoprene lining, 150mm dia ISI Marked, of pressure rating not less than 15Kg/cm² flanged type including necessary heavy duty gasket, GI Bolts, GI Nuts, GI Washers etc. complete all as specified and directed.
3
-
-
All as per Srl item No 97.00 above but 100mm dia complete all as specified and directed.
4
-
-
All as per Srl item No 97.00 above but 80mm dia complete all as specified and directed.
4
-
-
M&L in repairs Dual plates CI wafer type Non Return / Check Butterfly valve, 100 mm bore tested to pressure of 15Kg/Sqcm flanged type including necessary heavy duty gasket, GI Bolts, GI Nuts, GI Washers etc. complete all as specified and directed. Make:- Kejriwal/BIR/Upadhyay/Zoloto/Kirloskar
3
-
-
M&L for preparing the surface by scrapping the old painting and removing the grease, oil, dirt, algae etc. Painting of outer surfaces of MS pipes with one coat of black paint over a coat of Zinc Chromate complete incl its MS supports / clamps / nuts / bolts and marking / writing flow arrows and name with white paint by skilled painter All as directed of size 300 mm dia complete all as specified and directed.
50
-
-
All as per Srl item No 101.00 above but 200mm dia complete all as specified and directed.
60
-
-
All as per Srl item No 101.00 above but 150mm dia complete all as specified and directed.
70
-
-
All as per Srl item No 101.00 above but 100mm dia complete all as specified and directed.
90
-
-
All as per Srl item No 101.00 above but 80mm dia complete all as specified and directed.
90
-
-
All as per Srl item No 101.00 above but 20 to 50mm dia complete all as specified and directed.
120
-
-
M&L for preparing the surface by scrapping the old painting and removing the grease, oil, dirt, algae etc. Painting of outer surfaces of MS gate of size upto 2x2 mtr apprx with one coat of black paint over a coat of Zync Chromate complete all as specified and directed.
8
-
-
M&L for preparing the surface by scrapping the old painting and removing the grease, oil, dirt etc, Spray painting with one coat of super enameled anti corrosive paint of approved colour, over a coat of auto primer on external metallic surfaces incl frame / base channel complete all as directed for Air Compressor upto Cap 515M³/ Hr including motor of capacity upto 15HP complete all as specified and directed.
7
-
-
All as per Srl item No 108.00 here-in-before but for Air Compressor Cap 847 M³/ Hr including motor of capacity 25 HP complete all as specified and directed.
4
-
-
All as per Srl item No 108.00 above but for Air Compressor Cap 600 M³/Hr including motor of capacity 30 HP complete all as specified and directed.
2
-
-
All as per Srl item No 108.00 above but centrifugal pumpset, monoblock or coupled of capacity upto 7.5 HP complete all as specified and directed.
12
-
-
All as per Srl item No 108.00 above but 10HPto 20HP complete all as specified and directed.
6
-
-
S&F in repair and connect, MCB SP 6 to 32 A, AC, 240V,10KA 'C' curve ISI Marked complete all as specified and directed. Make:- HPL/IndoAsian/Havells
30
-
-
S&F in repair and connect, MCB SPN, 32A, AC, 240V, 10KA 'C' curve ISI Marked complete all as specified and directed.
Make:- Havells/HPL/Indo Asian
6
-
-
S&F in repair and connect MCB TPN/4P, 16 to 32A, AC, 415V, 10KA 'C' curve ISI Marked complete all as specified and directed.
Make:- Havells/HPL/Indo Asian
10
-
-
S&F in repair and connect, MCB TPN/4P, 40 to 100A, AC, 415V,10KA 'C' curve ISI Marked complete all as specified and directed. Make:- Havells/HPL/Indo Asian
6
-
-
S&F in repairs and connect, Motor Protection Circuit Breaker 3 pole, 415 V, 50/63 Amps, with over load relay range 40 to 80 Amps complete all as specified and directed. Make:- L&T, ABB, Schneider
6
-
-
All as per Srl item No 117.00 above but 25 Amps with over load release range 20 to 32 Amps complete all as specified and directed. Make:- Havells/HPL/Indo Asian
7
-
-
S&F in repairs and connect, Single Phase Preventer suitable for motor protection complete all as specified and directed. Make:- Havells/HPL/Indo Asian
20
-
-
S&F in repairs and connect, 3 phase Contactor 10 Amp 415V with 230V coil complete all as specified and directed. Make:- Havells/HPL/Indo Asian
15
-
-
S&F in repairs and connect, 3 phase Contactor 16 Amp 415V with 230V coil complete all as specified and directed. Make:- Havells/HPL/Indo Asian
12
-
-
S&F in repairs and connect, 3 phase Contactor 25 Amp 415V with 230V coil complete all as specified and directed. Make:- L&T, ABB, Schneider
9
-
-
S&F in repairs and connect, 3 phase Contactor 32/40 Amp 415V with 230V coil complete all as specified and directed. Make:- L&T, ABB, Schneider
10
-
-
S&F in repairs and connect, 3 phase Contactor 50/60 Amp 415V with 230V coil complete all as specified and directed. Make:- L&T, ABB, Schneider
9
-
-
S&F in repairs and connect, 3 phase Contactor 63/80 Amp 415V with 230V coil complete all as specified and directed. Make:- L&T, ABB, Schneider
5
-
-
S&F in repairs and connect, NO-NC auxiliary contact block suitable for 10 to 25A 3 phase contactors complete all as specified and directed. Make:- L&T, ABB, Schneider
7
-
-
S&F in repairs and connect, NO-NC auxiliary contact block suitable for 32 to 63A 3 phase complete all as specified and directed. Make:- L&T, ABB, Schneider
8
-
-
S&F in repairs and connect, No volt coil 230V, suitable for 3 phase 415V Contactors complete all as specified and directed. Make:- L&T, ABB, Schneider
6
-
-
S&F in repairs and connect, Plug in control relay 8 pin 24V DC/240 volts AC 9.5 KΩ with socket & clamp base two/three Change over in build mechanical indicator/latching facility and 1 NO-1NC, suitable for AC/DC complete all as specified and directed.
5
-
-
S&F in repairs and connect, over load Relay 3 Phase, 415V, 1.4 Amp to 6.0 Amp complete all as specified and directed.
6
-
-
S&F in repairs and connect, over load Relay 3 Phase, 415V, 25 Amp to 40 Amp complete all as specified and directed.
6
-
-
S&F in repairs and connect, DOL starter suitable for upto 5HP motor, 3 Phase, 415 V, with 1Ø preventer and thermal relays complete all as specified and directed. Make:- Havells, L&T, Crompton
4
-
-
S&F in repairs and connect, DOL starter suitable for upto 10HP motor, 3 Phase, 415 V, with 1Ø preventer and thermal relays complete all as specified and directed. Make:- Havells, L&T, Crompton
4
-
-
S&F in repairs, fully automatic star delta motor starter suitable for 15 to 22 HP pumpset, 3 phase, 415 V with relay range of 45 to 75 Amps incl enclosure complete all as specified and directed. Make:- Havells, L&T, Crompton
4
-
-
S&F in repairs, fully automatic star delta motor starter suitable for 30 / 40 HP pumpset, 3 phase, 415 V with relay range of 45 to 75 Amps incl enclosure complete all as specified and directed. Make:- Havells, L&T, Crompton
2
-
-
S&F in repair copper cable 1.5 Sqmm copper multistandard PVC insulated FR, 1100V grade complete all as specified and directed. Make:- Havells/Polycab/Grandlay/Finolex
90
-
-
S&F in repair copper cable 2.5 Sqmm copper multistandard PVC insulated FR, 1100V grade complete all as specified and directed. Make:- Havells/Polycab/Grandlay/Finolex
90
-
-
Supply only insulation tape roll 20 mm wide 15 Mtr long ISI mared complete all as specified and directed. Make: Steelgrip / Kinjal / Anchor
40
-
-
S&F in repairs, 1100 volts grade heavy duty PVC sheathed stranded Aluminium conductor twin core cable flat or circular of size 6 Sqmm. complete all as specified and directed.
200
-
-
S&F in repairs, 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16KA with Thermal - Magnetic Release. complete all as specified and directed. Make:- Havells/HPL/ IndoAsian/L&T
6
-
-
All as per Srl item No 140.00 here-in-before but 100Amps complete all as specified and directed. Make:- Havells/HPL/ IndoAsian/L&T
4
-
-
All as per Srl item No 140.00 above but 200Amps 25KA complete all as specified and directed. Make:- Havells/HPL/ IndoAsian/L&T
2
-
-
S&F in replacement of Post Top Lantern with acrylic dome suitable for and incl B22 LED lamp12 Watts complete all as specified and directed. Make:- Havells/Philips/Bajaj/Crompton
8
-
-
S&F in repairs, testing Volt meter 0-500 Volts, 96mm x 96mm, digital type with three way ON / OFF rotary type selector switch complete all as specified and directed. Make: AE/ Rishab/Meco/Enercon.
7
-
-
S&F in repairs, testing Amp meter 0-400 Amps, 96mm x 96mm, digital type with three way ON/OFF rotary type selector switch complete all as specified and directed. Make: AE/ Rishab/Meco/Enercon.
7
-
-
S&F in repairs, testing pilot lamps LED type with integral circuit & cluster LED suitable for operating at 240 /220 Volts complete all as specified and directed. Make: BCH/C & S Electric /L&T / Siemens.
24
-
-
S&F in repairs, Pressure Gauge, 100mm dia, 0-14 Kg/cm² pressure rating complete all as specified and directed. Make: Lub/Meco/H Guru/Pfizer
8
-
-
All as per Srl item No 147.00 here-in-before but 0-21 Kg/cm² complete all as specified and directed.
5
-
-
Supply and Laying in trenches or fixed to wall / pole, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade laid in trenches/ fixed in wall / pole of cross sectional area of cable 10 Sqmm 2 core incl taking down old unsv cable complete all as directed. Make:- Polycab/havells/Grandlay/Finolex
150
-
-
All as per Srl item No 149.00 here-in-before but 16 Sqmm 4 core complete all as specified and directed. Make:- Polycab/havells/Grandlay/Finolex
180
-
-
All as per Srl item No 149.00 above but 35 Sqmm 3.5 core complete all as specified and directed. Make:- Polycab/havells/Grandlay/Finolex
150
-
-
All as per Srl item No 149.00 above but 50 Sqmm 3.5 core complete all as specified and directed. Make:- Polycab/havells/Grandlay/Finolex
140
-
-
All as per Srl item No 149.00 above but 95 Sqmm 3.5 core complete all as specified and directed. Make:- Polycab/havells/Grandlay/Finolex
Note for item No 149.00 to 153.00 :- Excavation & earth work shall be measured & paid separately.
100
-
-
Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for laying of Cable or Pipe, electric pole, stay assembly etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/ losse soil complete all as specified and directed.
120
-
-
M&L for cutting hard standing / Road cutting for taking up or laying of LT UG cable upto a depth of 15 cm and after laying of cable, well ramming to the excavated soil and repair the cutting / excavated portion of road by providing PCC (1:2:4) type B1 (using 20mm graded stone aggregate) complete all as specified and directed. Note: Excavation below the depth of 15 cm shall be measured and paid seperately under relevant items.
5
-
-
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/ losse soil complete all as specified and directed.
82.7
-
-
Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point in soft/ losse soil complete all as specified and directed.
37.3
-
-
Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable / cable duct. (Only punned thickness shall be measured for payment purpose) complete all as specified and directed.
32
-
-
M&L for laying burnt clay fly ash old size bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over under ground cable for protection complete all as specified and directed.
3.5
-
-
M&L for Galvanized steel tubing, light grade, with all fittings of size 40 mm dia for protection of cable including taking down old, rusted & corroded unsv Galvanized steel tubing complete all as specified and directed.
80
-
-
M&L for Galvanized steel tubing, light grade, with all fittings of size 80 mm dia for protection of cable including taking down old, rusted & corroded unsv Galvanized steel tubing complete all as specified and directed.
100
-
-
S&F in replacement, heavy duty cloth strips of filter press as per existing frame with 500 GSM and complete over hauling of filter press incl testing complete all as specified and directed
2
-
-
S&F in replacement, Rotometer / Air flow indicator as per existing at site including required minor spares and T&P complete all as specified and directed
2
-
-
M&L for removing of manhole cover, cleaning / removal of sludge / solid wastes / debries in any quantity from any depth which is blocking the smooth flow of sewage lines , well flushing, incl disposal of removed sludge / waste material to designated local body approved places and refix the man hole cover in same position complete all as specified and directed. Note: Necessary T&P and consumables shall be inclusive in the rate quoted.
250
-
-
M&L for removing of manhole cover, cleaning / clearing the blocks of sewage lines by providing using split bamboo / solid pvc pipes or any other means for removal of blockage by debries / sludge / solid waste including well flushing for smooth gravity flow of sewage and refix the man hole cover in same position for 300 mm to 400 mm dia RCC / SGSW pipe complete all as specified and directed.
550
-
-
All as per Srl item No 165.00 above here-in-before but 150mm to 250mm dia complete all as specified and directed.
Note for Item No 164.00 to 166.00 :- Necessary T&P and consumables shall be inclusive in the rate quoted.
1350
-
-
M&L for precast RCC rectangular man hole cover of size 100cm x 45cm x 7.5cm thick made out of PCC 1:2:4 type B1 using 20 mm stone aggregate with 8 mm dia steel rod, 75mm c/c incl binding wire and 2 Nos of lifting handle moveable type incl dismantling of old broken and removal of debries from site complete all as specified and directed.
60
-
-
All as per Srl item No 167.00 here-in-before but circular of size 80cm dia x 7.5cm thick complete all as specified and directed.
50
-
-
M&L for Structural Steel Work, made out of Fe 410-W (Gde-E-250) quality-A Rolled Mild Steel Channel, Angle or Tee Sections, MS sheet with hinges & locking arrangements etc. cut to shape / ordinary length, drilled and countersunk for Screws / Bolts, including bending and welding duly painted with 2 coats of Anti Corrossive Synthetic enamel paint over a coat of Zync Chromate as in framed work with MS Sheet cover complete all as specified and directed.
1174
-
-
M&L for Cement concrete for coping / support / foundation of GI pipes, Pumpsets etc. incl necessary breaking or digging of floor, Type B1, 1:2:4, using 20 mm graded stone aggregate incl necessry form work and finish to exposed surface complete all as specified and directed.
2
-
-
S&F in replacement, medium duty manually operated chain pulley block 1 Ton capacity, 10 Mtr standard lift complete all as specified and directed.
12
-
-
Supply and fix for AC variable frequency device for 5 hp, 3 phase motors, IP20, power supply 415 +- 20 %, frequency 50 Hz, designed for steady speed error, fast torque rise and protection from resonance vibrations, the device provides an output current and freuency range as desired as per ground with 5 horsepower motors and all as specified and directed.
9
-
-
S&F in replacement, HDPE virgin FAB PP white/black media Cylindrical/circular shape - wagon wheel design having external fins , surface area - 350m2/m3 ,non toxic ,having specific gravity of 0.9-0.92 gms/cm3, voltage greater 98%, media fill range 25-55 % particle complete all as specified and directed. Make : M/s Ion exchange/M/S Thermax Ltd/M/S Rudraksha Envirotech
650
-
-
Supply only DWPE (Dewatering Polyelectrolyte) powder, pack of 10/25 Kg in polythene bags/HDPE drums complete all as specified and directed.
280
-
-
Supply only CHLORINE 65%-70% calcium based granular, disinfectant for STP water, pack of 40/45 Kg in HDPE drums complete all as specified and directed.
400
-
-
Supply only Sodium Hypo Chloride (10%) in Liquid form, as purifier of STP water, packing in 50 Ltr Can complete all as specified and directed.
2400
-
-
Supply only Calcium Hydroxide (Lime, 80-85%) in Powder form as pH Booster for STP water, packing in 40 Kg Sacks complete all as specified and directed.
1000
-
-
Supply only Bacteria culture in PVC shells suitable for MBBR type plant complete all as specified and directed.
173
-
-
S&F in replacement of Hexagonal (Chevron) shape tube settler media made out of UV stabalized virgin base PVC , height 700 mm after fixing , cross section of horizontal 120 mm and vertical 48 mm , tongue and groove fixed 1.0 mm thick having plan settling area of 12 - 14 m2/m3 , minimum weight of 64 Kg/m3 including taking out existing unseviceable media of any decription , replacement of Unsv Mild steel supporting frame and draining out of sludge complete all as specified and directed. Make:- M/s Ion exchange/M/S Thermax Ltd/M/S Rudraksha Envirotech. Note : Rate of Replacement of Mild steel supporting frame and draining out of sludge will be included in item.
6
-
-
Supply & fixing in replacement of Tube settler V notch in 150 mm x 150 mm C section suitable length in mm long made out of mild steel epoxy coated including taking out existing V notch of any decription complete all as specified and directed. Make:- M/s Ion exchange/M/s Thermax Ltd/M/s Rudraksha Envirotech
5
-
-
Supply only DAP fertilizer for day to day use in sewage treatment plant complete all as directed.
700
-
-
Supply only Molasses (Sheera) for day to day use in sewage treatment plant complete all as directed.
500
-
-
Supply only Poly aluminium chloride chemical for day to day use in sewage treatment plant complete all as directed.
300
-
-
S&F of LT submersible copper conductor cable of size 16 sqmm 3 core complete all as specified and directed. Make:- Polycab/Grandlay/Havells
90
-
-
S&F of LT submersible copper conductor cable of size 6 sqmm 3 core complete all as specified and directed. Make:- Polycab/Grandlay/Havells
65
-
-
S&F of LT submersible copper conductor cable of size 10 sqmm 3 core complete all as specified and directed. Make:- Polycab/Grandlay/Havells
90
-
-
M&L for cutting and removing of grass/bushes etc of any height grown inside STP premises and surrounding lift wells to keep the site clean and to carryout day to day maint and operations safely, grass cutting to be done as per site requirements & to the satisfactory level all as directed.
1800
-
-
S&F street/security light fitting of any description, supply, fix and connect 45 watts LED integrated street / security light fitting with All accessories alongwith 32 mm GI bracket with suitable clamps, bolts, nuts & washers incl provision of two core 2.5 Sqmm stranded Aluminium conductor cable of suitable length complete all as specified and directed.
16
-
-
Taking down unsv street light loop-in and loop out box by disconnecting electrical connection and removing existing clamps, nuts, bolts, and washers and supply, fix and connect, factory made out door type syntex street lihgt loop-in and loop out box comprising with suitable size of bus bar, insulators, connectors etc and with one C curve 6 Amp MCB SP, one PVC way connector etc. incl suitable size clamps, nuts, bolts & washers complete all as specified and directed.
15
-
-
M&L for Scraping, cleaning and preparation of old surfeces of steel tubular pole (9 Mtr long) complete and applying one coat of aluminium paint over a coat of Zinc Chromate complete all as specified and directed.
16
-
-
M&L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (Earth pit not less than 2.25M deep below ground level) with top edge of earth plate 1.5M deep below normal ground level connected to GI earth strip 32x6mm by means of bolts, nuts,check nuts and washers of galvanised iron or steel incl necessry excavation, earth work in any type of soil, 1:3:6 type C1 PCC chamber, RCC chamber cover, watering pipe, funnel etc All as shown in electrical plate No 3 of SSR part I connected to earthing test point All as indicated including testing on completion complete all as specified and directed.
Note:- Earth strip upto 7.5mtr deemed to be included in above quoted rate.
7
-
-
All as per Item No 191.00 above but earthing with 4mm dia GI earth lead wire complete all as specified and directed.
Note:- Earth strip upto 7.5mtr deemed to be included in above quoted rate.
12
-
-
S&F fine bubble air diffuser of size 3" dia, 1 mtr long complete all as specified and directed.
4
-
-
Repair and servicing of Dozing pump (0.5HP/1HP) & incl replacment of minor spare parts for smooth function of the pump complete all as specified and directed.
3
-
-
M&L for attending complaints by deploy an expert/ skilled technican to check the fault of Electric control panels of any type installed at STP & Liftwells for any non functional of electronic/ electric control switches, metering equipment, circuit control wiring and rep/ replacement of necessary items to bring the panel system into serviceable state all as directed.
Note:- Spare parts measured and considered under relevant item of Sch'A'.
20
-
-
M&L Earthing with copper plate of size 60cm x 60cm x 3.15mm thick electrode and 20x3 mm copper strip as earthing lead, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level.connected to copper earth strip by means of bolts, nuts, check nuts and washers all as shown in electrical plate No 5 connected to earthing test points all as described in MES schedule Part I including excavation, earth work concrete pit with 50mm thick RCC cover in RCC 1:2:4 type B-1 duly reinforced with MS bars 6mm dia @ 150C/G both ways and pit chamber in PCC 1:2:4 TYPE B-1 with 2 No's suitable lifting handles of 12mm MS bar and GI protection pipe of 20mm dia and watering pipe 20 mm dia with washer funnel with wire mesh, test point and extra length up to 7.5 mtr (beyond 7.5 mtr will be measured seperately) connected to main switch board/terminal block complete all as specified and directed. Note :- On testing after completion if desired earth resistance not morethan 1.5 Ohms is not obtained the earthing will be redone at no extra cost.
5
-
-
M&L test point terminal block made of gun metal or phosphoras of size 75 x 75 x 25mm drilled and screwed including 3 No's 08 mm dia, 25mm long hex heat screws including sheet metal box of suitable size complete all as specified and directed.
130
-
-
M&L for fixing the Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed.
220
-
-
M&L for making good the damaged portion of PCC work, with suitable PCC 1:2:4 type B-1 including of chamber cover as per site requirement complete all as specified and directed.
60
-
-
M&L earth continuity of main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required of size 20 x 3mm copper strip with fixed saddles complete all as specified and as directed.
110
-
-
M&L earth continuity of main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required of size 25 x 3mm aluminium strip with fixed saddles complete all as specified and as directed.
160
-
-
S&F of Flame proof light fitting batten including LED tube of 20W of CIMFR certified, IP 65 protected complete all as specified and directed.
6
-
-
S&F of Flame proof lintegral well glass light fitting suitable to fixed on wall of capcity 60W, IP 65/66 protected complete all as specified and directed.
4
-
-
S&F flame proof rotary switch for ON & OFF flame proof lighting of 10A rating, IP 65/ 66 protect complete all as specified and directed.
10
-
-
S&F flame proof switch socket combine of 16 to 32A rating, IP 65/66 protect complete all as specified and directed.
4
-
-
S&F in replacement horizontal double mounting siren range 1.5 KM audible ,AC 230V, including suitable HP motor complete all as specified and directed.
2
-
-
M&L for servicing cum rep/rewinding of electric siren of single phase/three phase of any type and capcity motor including testing to the satisfactory function of Siren/hooter complete all as specified and directed.
4
-
-
Supply and fixing Mechanical seal for CRI Vetical Pump complete all as specified and directed.
15
-
-
Supply and fixing water level controller with 3 mtr wire length complete all as specified and directed.
20
-
-
Draining out the old engine oil from DG set, cleaning of sump deposits and rectifying leakages if any, by means of welding, brazing and cleaning and servicing of engine complete all as specified and directed.
200
-
-
Supply and filling of new engine oil 10W-30 complete all as specified and directed. Make : Servo/Castrol
220
-
-
M&L for Taking down radiator from DG Set of any type /make of capacity 15 to 82.5 KVA from base mounting, cleaning /descaling by using of air compressor and cleaning with suitable stain removal detergent along with chemical etc and rectifying water leakage by means of welding / brazing, after cleaning, descaling and rectifying of leakage etc. including renewal of all connecting parts i.e radiator hose pipe with clamps, bolts, nuts washers, rubber bush packing material etc and re-assembling the radiatorand fixing with DG set properly in original position, checking the alignment, making proper hose connecting, testing for smooth operation complete all as specified directed.
Note :- The cost of renewed parts is deemed to be included in unit rate quoted by contractor. No extra cost shall be paid to the contractor for the same.
8
-
-
M&L for taking out of injector of DG Set of any type/make of capacity 10 KVA to 82.5KVA disconnection and opening of fuel injector assembly, carrying complete overhauling/ servicing fuel injector system, including renewal of injector kit checking of pressure complete for each injector and re-assembling the same in original positon by making proper fuel connnection and testing for smooth operation complete all as specified directed.
Note: Cost of renewal of parts to be measured and paid seperately.
5
-
-
Supply only Nozzle holder for 15 to 82.5 KVA complete all as specified and directed.
3
-
-
Supply and fixing in repair high pressure fuel line suitable for DG set of capacity 15KVA to 82.5 KVA complete all as specified and directed.
2
-
-
M&L for Opening /taking out of fuel injection pump (FIP) of DG Set of any type/make of capacity 15 KVA to 82.5 KVA, disconnecting of fuel injector line, carrying complete overhauling /servicing of injecor pump, calibration of fuel pump as per manufacturer instruction , assembling of the same with DG Set properly in original position, checking the allignment, making proper fuel connection including renewal of unserviceable/defective minor parts like seal, 'O' ring, fuel pump gaskit, gear, technometer, bushing, technometer cover, fuel pump, gear housing, fuel pump gear etc and testing for smooth operation complete all as directed, after renewal of following major parts if found defected/unserviceable :- Note Following items measured & Paid seperately.
3
-
-
Supply only Plunger complete all as specified and directed.
2
-
-
Supply only Plunger Barel complete all as specified and directed.
6
-
-
Supply only Control rod complete all as specified and directed.
2
-
-
M&L for Removal of self starter motor from the DG Set of capacity 15 KVA to 82.5 KVA, strip opening the starter for the renewal of minor parts like bush gear, "O" ring assembly, bush set, sealing kit, including assembling and re fixing at site complete all as specified and directed. After renewal of following major parts if found defected/unserviceable. Note:- Following items measured & Paid seperately.
3
-
-
Suply only Armature complete all as specified and directed.
2
-
-
Supply only Solenoied switch complete all as specified and directed.
3
-
-
Supply only Field Coil complete all as specified and directed.
2
-
-
S&F (in repairs) of fuel shut down solenoied valve kit including takingout old valve assy and making all connection testing for smooth operation in any type DG Set complete all as specified and directed.
3
-
-
M&L for 'B' check kit of DG set 15 KVA to 82.5 KVA complete all as specified and directed.
12
-
-
S&F ( in repairs) element Air cleaner for DG set cap 10 KVA to 82.5 KVA complete all as specified and directed.
10
-
-
S&F (in repairs) Radiator cap suitable for DG set of any type /make and capacity complete all as specified and directed.
12
-
-
S&F (in repairs), V belt suitable for DG Set 15 KVA to 82.5 complete all as specified and directed.
12
-
-
M&L for top up of concentrated form coolent in radiator of DG Set of any type/Make and capacity, complete all as specified and directed. Make :-Bosch, feelit guard & equalient
Note: Measurement shall be done only in concentrate form of coolant.
12
-
-
S&F (in repairs) Fuel hose flexible with matallic tape from fuel tank to filter, filter to FIP including allied nut bolt washer and coupling for DG set 15 KVA to 35 KVA with and including taking out old hose and making all connection testing for smooth operation all as specified and directed.
5
-
-
S&F (in repairs) of radiator hose pipe suitable both inlet and outlet of 15 KVA to 82.5 KVA DG Set with including taking out old hose and making all connection, testing for smooth operation complete all as specified and directed.
6
-
-
Taking out and S&F (in repair) of 12V, 60 AH Battery tubular complete all as specified and directed. Make:- Exide/Amaron/Luminous
3
-
-
Taking out and S&F (in repair) of 12V, 150 AH Battery tubular complete all as specified and directed. Make:- Exide/Amaron/Luminous
2
-
-
Taking out and S&F (in repair) of 12V, 100 AH Battery tubular complete all as specified and directed. Make:- Exide/Amaron/Luminous
3
-
-
Taking out and S&F in repair of battery terminals made of brass, suitable for battery of any type /make and capacity, complete all as specified and directed.
20
-
-
Taking out and S&F in repairs of PVC insulated multi stranded copper conductor single core unsheathed cable of size 70 sqmm, 1100 volts grade for battery lead Red and Black colour complete all as specified and directed. Make:- Polycab/Havells/Grandlay
15
-
-
Taking out and S&F (in repairs) thermostat with new thermostat alongwith complete assy for DG set connection complete all as specified and directed.
5
-
-
Taking out and S&F (In repairs) Water Temp Meter of any type and all as specified and directed .
4
-
-
Taking out and S&F (in repairs) OIL PRESSURE METER of any type complete all as specified and directed.
5
-
-
Taking out and S&F (in repairs) OIL TEMP METER of any type complete all as specified and directed.
5
-
-
Taking out and S&F (in repairs) High Cylinder Temperature (HCT) Switch of any type and size of DG Set complete all as specified and directed.
4
-
-
Taking out and S&F (in repairs) Low lube oil pressure (LLOP) Switch of any type and size of DG Set complete all as specified and directed.
3
-
-
M&L for taking down of existing fuel from fuel tank by any means, removing of sludge and sediments deposited inside the fuel tank by repeatedly washing by using of chemical & detergent with air compressor including rectifing of leakage if found and refixing the same in position as per direction of engineer in charge by testing all as specified and directed. (capacity 15 KVA to 82.5 KVA DG Sets)
2
-
-
Opening and taking out of cylinder head 15 KVA to 82.5 KVA capacity DG Set Renewal of inlet and exhaust valve, valve guide sets and lapping of valve machining job, pressure testing including renewal of unserviceable parts, reassembling complete testing as required.
3
-
-
S&F battery charger suitable for charging of battery 12 Volts 100/150/60 AH with charging current 0-10 Amps, input voltage 230 Plus complete all as specified and directed.
3
-
-
Renewal of anti viberation mounting pad B series of any type or capacity complete all as directed induly taking out old US material complete all as specified and directed.
2
-
-
Taking out old US material and S&F distilled water in sealed packing for DG 12 volts battery complete all as specified and directed.
70
-
-
S&F (in Replacement) of fauty battery charging sets 12V DC automatic type, fixed in DG set /panel with transformer and rectifier etc including rewiring of faulty control completer all as specified and directed.
2
-
-
M&L for Repair of DG set panel board by means of painting by power coated with proper fixing of nut, bolts, hinges, welding and fixing of necessary door lock set of DG sets of any capacity with handle including double key. The repair of panel will also include making good and dressing up of cables of change-over switch systematically and all other allied connections complete all as specified and directed.
3
-
-
S&F in repairs/maintenance of Automatic voltage Regulator (AVR) suitable for DG Set of 15 KVA to 82.5 KVA capacity with and including taking out old AVR , replacement of all minor and major parts like Ics, Rectifier, dioddes, capacitors, resistance, relay printed circuit board etc and making all connection testing for smooth operation complete all as specified and directed.
3
-
-
Renewal of Expension bellow for exhaust of DG Set any type any capacity and complete all as specified and directed.
2
-
-
M&L for carrying out complete overhauling /servicing and repairing of existing AMF panel by suitable connections and control wiring of DG Set panel, AMF Panel, control panel including checking and rewiring faulty electrical circuit using 1.5 sq mm FRLS copper conductor making all concections to CTs, push button, digital volt meter, digital amp meter and renewal of LED indicator and testing for smooth operation of any capacity complete all as specified and directed.
5
-
-
S&F in replacement of Automatic voltage Regulator (AVR) suitable for DG Set of 82.5 KVA capacity with and including taking out old AVR and making all connection testing for smooth operation complete all as specified and directed.
1
-
-
S&F in replacement of Automatic voltage Regulator (AVR) suitable for DG Set of 63 KVA capacity with and including taking out old AVR and making all connection testing for smooth operation complete all as specified and directed.
1
-
-
Suply only FRLS copper conductor 1.5 Sqmm suitable for contro wiring of panel complete all as specified and directed. Make: Polycab, Havells, Finolex etc.
100
-
-
Renewal of asbestos rope of 19 mm dia around of the exhaust pipe of diesel engine any capacity complete all as specified and directed.
18
-
-
Dismantling AC alternator assembly of any capacities including taking out of worn out windings of Rotor and stator incl rewinding the coils with suitable guage of super enamelled winding wire of copper , renewal of insulation materials, heat varnishing, connecting leads and terminal plates all as required to make serviceable of the DG and including reassembling the same after necessary. The item rate includes shifting of altternatos from location to workshop and back to the installation complete all as directed Note : - Winding coils of super enameled copper shall be measured & paid separately under relevant item of the schedule.
1
-
-
Supply of copper winding for item No-255 above as per existing guage complete all as specified and directed.
70
-
-
M&L Earthing complete with galvanised mild steel earth plate electrode 600x600x6mm thick, burried directly in ground to a depth not less than 4.5 metres deep below ground level with top edge of earth plate not less than 3.75 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI strip 32 x 6 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected , GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20mm dia bore GI pipe 'medium grade' as water pipe from earth chamber to upper edge of earth plate, GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 8mm dia @ 150 c/c both ways with 6mm dia MS round bar as in lifting handles, and mild steel angle iron frame 40mmx40mmx5mm for pit cover ,excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate number 3 of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.
5
-
-
Supply & fixing exhaust fan ,steel body AC single phase , 230 V of size 450 mm sweep with , blades and frame and louvers complete all as specified and directed. Make:- Crompton, Orient, Khaitan, Usha, Havells
3
-
-
Supplying, fixing and testing ( in repairs) 200 Amps, 415V, 4 pole off load changeover switch with sheet metal enclosure, front operated, 50 Hz, fixed to walls/ panels with suitable size clamps, nuts, bolts and washers complete all as specified and directed including making connections and testing complete all as specified and directed. Make:- Havells, L&T, Schneider
1
-
-
S&F in repair and testing 100 Amps, 415V, 4 pole off load changeover switch with sheet metal enclosure, front operated, 50 Hz, fixed to walls/ panels with suitable size clamps, nuts, bolts and washers complete all as specified and directed including making connections and testing complete all as specified and directed. Make:- Havells, L&T, Schneider
1
-
-
S&F in repair and testing 63 Amps, 415V, 4 pole off load changeover switch with sheet metal enclosure, front operated, 50 Hz, fixed to walls/ panels with suitable size clamps, nuts, bolts and washers complete all as specified and directed including making connections and testing complete all as specified and directed. Make:- Havells, L&T, Schneider
2
-
-
S&F in repair and testing 32 Amps, 415V, 4 pole off load changeover switch with sheet metal enclosure, front operated, 50 Hz, fixed to walls/ panels with suitable size clamps, nuts, bolts and washers complete all as specified and directed including making connections and testing complete all as specified and directed. Make:- Havells, L&T, Schneider
4
-
-
S&F (in repair) DC (Excitor) after removal of for 12 V DC from the DG Set of capacity 15 KVA to 82.5 KVA , and renewal of minor parts like bush, "O" ring assembly , bush set, sealing kit,including assembling and re fixing at site complete all as specified and directed.after renewal of following major parts if found defected/unserviceable. Note:- Following items measured & Paid seperately.
2
-
-
Supply only Stator complete all as specified and directed.
1
-
-
Supply only Rotor complete all as specified and directed.
1
-
-
Supply only Exciter complete all as specified and directed.
2
-
-
Supply only Rectifier plate with diod assembly complete all as specified and directed.
1
-
-
Supply only Slip ring voltage regulator complete all as specified and directed.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%