Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date5 Oct 2024
Closing Date2 Nov 2024
Tender Amount₹ 45,50,000
Costs
EMD
₹ 91,100Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_678180_1Bid Award Id
ViewTender No
8779/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Addition/alteration to certain JCOs/OR married accommodation at 39 GTC Varanasi Cantt.
BOQ Items
M&L for providing, cement concrete 1:3:6 Type C-1 (using 20mm graded stone aggregate) in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.
Note : The rates include for use of formwork (straight or curved).
1.5
-
-
M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length bent to shape required incl cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
213
-
-
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling, and mass concrete, complete all as specified and directed.
0.9
-
-
M&L for brick work with old size fly ash bricks straight or curved on plan to any radius half brick thick wall built in CM (1:4) complete all as specified and as directed.
5.5
-
-
M&L for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1: 6 complete all as specified and as directed.
2.5
-
-
Dismantling brick tiles any size laid bedded and pointed in any mortar complete all as specified and as directed.
18.75
-
-
Demolition of mud or any other material of any description over RCC roof slab in any thickness and removing the same out side MOD land, complete all as specified and as directed.
7.5
-
-
M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in roof padding (levelling course), n'exc 25mm average thickness, finishing the surface fair & even complete all as specified and directed.
190
-
-
M&L for 10mm thick rendering in CM 1:3 on fair faces of concrete surfaces /roof top, mixed with liquid water proofing compound @ 200ml per 50 Kg cement, finished surface even and smooth without using extra cement complete all as specified and directed. Note :- Liquid WPC shall be measured and paid separately.
180
-
-
M&L for providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges all around periphery of the wall complete all as specified and directed.
1
-
-
M&L for applying high performance polyurethane liquid membrane waterproofing coating on roof in two layer complete as per manufacturer's instructions complete all as specified and directed. The treatment shall be carried out in following steps:-
(i) Step 1: clean the roof surface thoroughly to make it free of dust, dirt, grease, and other debris.
(ii) Step 2 : Fix the cracks on the surface bed by cutting it into the V section, followed by cleaning and filling with polyurethane-based crack filling compound and white cement in the ratio of 1: 2.
(iii) Step 3 : Substrate should be neutralized using the acid application to remove the alkalinity.
(iv) Step 4 : All joints, corners and RWP openings shall be properly repaired as per manufacturer's instructions. The material recommended by manufacturer shall be used and cost of same shall deemed included in quoted rates.
(iv) Step 5 : Apply a pack of polyurethane primer coat to the surface as an adhesive coat, and allow to dry completely for at least 8 hours.
180
-
-
Contd/...
(v) Step 6 : Two successive finishing coats with polyurethane liquid membrane must be applied by brush/roller/spray. Each coating must be dried for at least 12 hours before applying the subsequent coating. After Geotextile fabric of 40 GSM to be applied over first coat while first coat is still wet . This PU coating has to be continued 150 mm up the parapets or walls and at least 100 mm into the rainwater pipes.
(vi) The final polyurethane coating is sprinkled with a layer of 300 microns of sand.
(a) The contractor shall submit a guarantee of 10 years from the date of completion of work for waterproofing treatment along with manufacturer's guarantee. The amount @ Rs. 40 (Forty) per Sqm and subject to min of Rs. 4000/- shall be retained from final bill till the expiry of guarantee period. The contractor at his own option may furnish fix deposit receipt in lieu duly plaged in favour of GE (East) Prayagraj.
(b) The water proofing shall be carried out by authorised applicator of manufacturer. The name of applicator shall be got approved in writing from GE within 30 days since commencement of work.
-
-
-
Contd/...
(c) Liquid membrane @ 1.5 Kg/Sqm/ 2 coats and epoxy primer @ 0.15Kg/Sqm shall be applied. The liquid membrane shall strictly as per relevant IS code/BIS code.
(d) Each stage (preparation of surface, priming, Ist coat and 2nd coat) shall be got approved from GE in writing before execution of successive stage.
(e) Production of Purchase vouchers for full quantity duly defaced by Engg-in-charge is mandatory requirement for release of payment. The same shall be recorded in MB.
-
-
-
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
530
-
-
M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.
54
-
-
M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.
270
-
-
M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in vertical surface, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 Complete all as specified and directed.
27
-
-
M&L for Coloured Glazed ceramic tiles in vertical surface 450mm X 300mm X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick plaster in cement mortar (1:4) complete all as specified and directed.
179
-
-
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
5.51
-
-
M&L for machine cut kota stone slab (area not less than 0.30 Sqm and width not less than 0.50m each slab) in flooring, 18- 20mm thick laid over and including 20mm screed bedding in cement mortar (1:6), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
36.67
-
-
M&L for Kota stone slab (area not less than 0.30 Sqm and width not less than 0.50m each slab), 18- 20mm thick in riser of steps, skirting, dado and pillar laid over and incl 10mm thick plaster in cement mortar (1:3), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
9.2
-
-
M&L for 20 mm thick Granite slab (in single full length) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
9.2
-
-
M&L for Rounding to edges of stone slabs one edge/half rounded, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.
29
-
-
Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) incl chequered tiling and Paver blocks complete all as specified and as directed.
6
-
-
M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.
48
-
-
M&L for 1st quality non skid coloured ceramic Heavy duty tiles, 10 mm thick, area of each tile n exc 0.11 Sqm, set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.
36
-
-
M&L for 75 mm thick cement concrete 1:3:6 type-C-2 (using 40mm graded stone aggregate) in Sub floors, Sub bases, Floors and Pavings, etc, finished surface even and even and fair without using extra cement complete all as specified and as directed.
36
-
-
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
750
-
-
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4, mixed with liquid water proofing compound @ 200ml/50Kg cement complete all as specified and as directed.
NOTE: Liquid water proofing compound shall be measured and paid separately under respective item here-in-under.
380
-
-
Supply only Liquid water proofing compound complete all as specified and as directed.
30
-
-
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) complete all as specified and as directed.
320
-
-
M&L for rendering 5 mm thick on concrete surface in ceiling in CM 1:3 complete all as specified and as directed.
50
-
-
M&L for preparation of new plastered or unplastered surfaces of wall/ceiling to make free from dust, loose paint etc complete all as specified and as directed.
750
-
-
M&L for preparation of old painted surface by complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) using 80grade sanding pad and make the surface free from dust, loose paint etc complete all as specified and as directed.
1700
-
-
M&L for applying waterproof cement based putty @ 1 Kg (undiluted) per sqm over prepared surface of wall and sanding of the putty surface with mechanical wall sander using sanding pad of 240 Grit or above to make the surface even and smooth complete and make it free from dust etc. complete all as specified and directed.
2450
-
-
M&L for one coat of acrylic water based interior /exterior grade primer @ 0.9 ltr (undiluted)/10 sq mtrs mixed with water in 1:1 ratio complete all as specified and directed.
2450
-
-
M&L for two coats of Oil bound distemper paint using Airless spray technology complete all as specified and directed.
1550
-
-
M&L for two coats of water based premium acrylic smooth exterior emulsion paint of approved colour complete all as specified and as directed.
900
-
-
NOTES FOR SMART PERIODICAL UNDER ITEM NO. 36 TO 40 ABOVE:
(a) The paint shall have silicon additive & Color stay Technology, Excellent Dirt Pick up resistance, anti algal properties and low VOC (less than 50 gram/ litre) as per the LEEDS specifications, (b) Consumption of paint shall not be less than 1.79 Kg/10Sqm for two coats where as for primer it shall not be less than 0.90 ltr/10 Sqm for one coat. (a.) The smart periodical services shall be got executed through authorized applicator of manufacturer whom painting materials is proposed to use. The approval of GE in writing for name of applicator and MOU with him is mandatory requirement. before execution of work. (c) Production of Purchase vouchers for full quantity duly defaced by Engg-in-charge is mandatory requirement for release of payment. The same shall be recorded in MB. (d) No material brought st site shall be allowed to incorporate in the work without approval of GE in writing.
(e) All painting work i.e removal of existing treatment, application of putty, primer and paint, sanding putty surface etc shall be done through grinding or spray machine of appropriate capacity and specifications.
-
-
-
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.
75
-
-
S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
7.5
-
-
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
16.5
-
-
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.
40.5
-
-
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.
10.5
-
-
S&F 110mm PVC (SWR) bends any radius with access door complete all as specified and as directed.
6
-
-
S&F 110mm PVC (SWR) bends any radius complete all as specified and as directed.
6
-
-
S&F 75mm PVC (SWR) bends any radius complete all as specified and as directed.
6
-
-
S&F 75mm PVC (SWR) bends any radius with access door complete all as specified and as directed.
6
-
-
S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.
6
-
-
S&F 110mm PVC (SWR) vent cowl complete all as specified and as directed.
5
-
-
S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent complete all as specified and as directed.
18
-
-
S&F Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts (not less than 8mm dia and 75mm long) and securing ends of stays suitable for 75mm/100mm bore pipe complete all as specified and as directed.
9
-
-
S&F 75mm PVC (SWR) vent cowl complete all as specified and as directed.
9
-
-
M&L for Cutting chases pinning in brick walls, making good to facing where required and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades, shelves lintels etc. and cutting chases for concealed for water tubing or concealed conduit wiring etc and making good, cutting n.exc 10cm girth complete all as specified & directed.
75
-
-
Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe complete all as specified & directed.
102
-
-
S&F GI tubes 15mm bore medium grade with all fittings fixed to walls and ceilings or laid in floor complete all as specified & directed
84
-
-
M&L for refixing old steel tubing 15mm dia and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified & directed.
18
-
-
Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe complete all as specified & directed.
84
-
-
S&F 20mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed.
66
-
-
Refixing old steel tubing 20 mm dia and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified & directed.
18
-
-
S&F in repair 15 mm dia bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified & directed.
24
-
-
S&F in repair 15 mm dia angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified & directed.
24
-
-
S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden/PVC plugs with chromium plated brass screws and cup washers complete all as specified & directed.
6
-
-
S&F in repair Vitreous china wash down water closet pedestal pan white, closed pattern with recessed bottom including plastic water closet seat cover with mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.
6
-
-
S&F in PVC valve less, symphonic action type, flushing cistern 10 litres capacity, low level, white, with inlet ball valve float handle along with suitable flush pipe/bend including brackets, complete all as specified & directed.
6
-
-
S&F in repair brass chromium plated 2 way bib cock with wall flange 15 mm dia screwed down, screwed for iron pipes complete all as specified and directed.
6
-
-
S&F in repair Health faucet with ABS body with 8 mm dia 1.00 m long flexible tube and wall hook complete all as specified and directed.
6
-
-
S&F in repair 60cm long sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 12cm wide with chromium plated bracket guard and railing complete all as specified and directed.
6
-
-
S&F in repair kitchen or laboratory sinks with drainage board made of 1.00 mm thick stainless steel sheet with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified & directed.
6
-
-
S&F in repair vitreous china wash hand basin (WHB), white, flat back of size 550 x 400 mm excluding taps, waste chain and plug but including bracket, waste coupling of 32 mm size complete all as specified and directed.
6
-
-
S&F in repair Brass chromium plated shower rose 125 mm dia with shower arm complete all as specified and directed.
6
-
-
S&F in repair 500 litters capacity white colour double layer, ISI marked, rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces for inlet, outlet, washout, overflow, GI tank nipple and 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball, screwed for iron pipe complete all as specified and directed.
6
-
-
S&F in repair 20 mm dia Gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified & directed.
12
-
-
S&F in repair PVC connections, 15mm size with PTMT nuts of length 600mm complete all as specified & directed.
24
-
-
S&F in repair Kitchen rack plate of size 75 x 60cm, made of 1.00mm thick stainless steel sheet, pattern all as per sample kept with GE office complete all as specified & directed
6
-
-
S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
6
-
-
S&F in repair 15mm bore fancy type pillar tap cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered 'hot' or 'Cold' with long screwed shanks and fly nuts fixed to pipe complete all as specified and directed.
6
-
-
S&F in repair Stainless steel soap dish of approved make and model similar to sample kept in GE's office complete all as specified and directed.
6
-
-
M&L for sunken portion treatment in following steps and procedure given below:-
(a) Taking out complete filling from shuken portion including demolition of existing floor and underneath layers of any thickness and description compete.
(a) Making provision of drainage spout using 40mm dia bore light grade GI pipe up to outside of outer wall (Approx 450mm to 600mm long) including making hole in wall and sealed properly after putting spout pipe with rich cement mortar mixed with sealant compound.
(b) Clean the sunken surfaces (bottom and sides) thoroughly to make it free of dust, dirt, grease, and other debris. (c) Provide 50mm thick PCC 1:1.5:3 type A-0 (using 12.5mm graded stone agg) mixed with waterproofing chemical as per manufacturer instructions , laid in slope towards spout pipe. (d) 15mm thick cement plaster on vertical faces in CM 1:3 mixed with water proofing chemical. (e) Applying two coats of polyurethane liquid membrane waterproofing coating on vertical as well as horizontal surface.
(f) Drainage and water supply pipe shall test for leakage properly. If any leakage is observed the same shall be blocked/sealed properly before loose filling in sunken portion.
10
-
-
Contd/...
(g) Pond test for sunken portion shall carried out before filling singhals and test report duly signed by Enng-in-charge shall be kept in record. This stage shall be passed in writing by GE.
(h) Provide 20mm singhals aggregate as filter media, 150mm thick and than PCC1:5:10 type E-2 (using 0mm graded stone aggregate) of required thickness as sub base for floor
(j) Provide 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm grade stone aggregate) as base for receiving floor finish.
(k) Provision of non skid ceramic coloured joint less tiles (square/ rectangular), 7 to 8 mm thick, area of each tile exc 0.11 Sqm but n'exc 0.18sqm as in floors etc; over and including 15mm thick screed bed in CM (1.6), laid, jointing in neat cement slurry and pointed/filled with epoxy chemical mixed with pigment to match the shade of tiles complete all as specified and directed.
NOTE : (i) Chemical in various applications shall be shall be used as per manufacturer instructions.
(ii) Carpet area shall be measured for payment purpose.
-
-
-
S&F in repair 202 grade stainless steel drapery rod 20 mm dia with fixing brackets and fancy type finials /Lattos, complete all as specified & directed
Note : Brackets and finials/latto shall strictly as per sample kept in GE's office or as approved by GE.
75
-
-
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area not exc 1.5 Sqm each complete all as specified & directed
54
-
-
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified & directed
42
-
-
Dismantling boarding any description fixed in any position with nails or any other means complete all as specified and directed
36
-
-
S&F Continuous (piano) hinges, mild steel, bright finish or electro-galvanised, width of flaps 30mm (when open) complete all as specified and directed.
39
-
-
M&L for 18-19 mm thick pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified & directed.
36
-
-
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet reinforced with 19mm M.S. Square tube of 19 gauge, fixed in opening as per specification & drawing given on page No. 178 of SSR Part-II-2020 under section 8, complete all as specified and directed.
55
-
-
Factory made Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & given on page No. 179 of SSR Part-II-2020 under section 8, complete all as specified and directed.
15
-
-
S&F 125 x 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified & directed
116
-
-
S&F 105 x 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified & directed
57
-
-
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel /iron surfaces of any description, over 10cm in width or girth, not otherwise described including preparation of surface complete all as specified and directed.
52
-
-
M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in bed block and filling in back side of pressed steel door frames complete all as specified & directed
1.45
-
-
S&F 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.
38
-
-
M&L for 30mm thick, 2nd class hard wood glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.
20
-
-
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.
16
-
-
S&F 150mm Aluminium handles, cast type, anodised of pattern/design as approved by GE/sample kept in GE's office complete all as specified and directed.
75
-
-
S&F 200mm(bolt length) Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
72
-
-
S&F 250mm(bolt length) Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
18
-
-
M&L for applying one coat of synthetic enamel paint on old steel /iron surfaces of any description, over 10cm in width or girth, not otherwise described including preparation of surface complete all as specified and directed.
9
-
-
M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, over 10cm in width or girth, not otherwise described including preparation of surface complete all as specified and directed.
130
-
-
M&L for applying one coat of synthetic enamel paint on old wooden surfaces of any description, over 10cm in width or girth, not otherwise described including preparation of surface complete all as specified and directed.
3.3
-
-
S&F 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.
132
-
-
M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
300
-
-
M&L for fabrication and fixing aluminium window / ventilator, THREE TRACK, SLIDING TYPE including lock, jointing cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized aluminium fittings such as hinges, tower bolts, handles etc and 5.5mm thick ordinary plain glass and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed. The alluminum sections used shall be POWDER COATED of following specifications:-
(a) Section size 61.85 x 31.75x 1.2 mm thick for styles(top & bottom) & side rails Section size 44.45 x 44.45 x 1.2mm thick for lock rail of shutters.
10
-
-
M&L for fabrication and fixing aluminium window / ventilator, OPENABLE TYPE including lock, jointing cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized aluminium fittings such as hinges, tower bolts, handles etc and 5.5mm thick ordinary plain glass complete all as specified and directed.
The alluminum sections used shall be POWDER COATED of following specifications:-
(a) Section size 61.85 x 31.75x 1.2 mm thick for styles (top & bottom) & side rails Section size 44.45 x 44.45 x 1.2mm thick for lock rail of shutters.
28
-
-
M&L for fabrication and fixing aluminium window / ventilator, FIXED TYPE without sash bar, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and 5.5mm thick ordinary plain glass complete all as specified and directed.
NOTE : The alluminum sections used shall be POWDER COATED of size 61.85 x 31.75x 1.2 mm thick
7
-
-
S&F 140mm Floor door stopper of aluminium alloy body and tongue, with hard drawn steel spring complete all as specified and directed.
18
-
-
S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
12
-
-
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
2.7
-
-
S&F rolled mild steel work in roof trusses (framed), trussed, purlins, crane gantries, pillars, rails and fastenings and heavy bracket framing (beam, tee, angle, channel, Hollow or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde - E-250) quality - A complete all as specified and directed.
4200
-
-
S&F mild steel screw bolts of neck diameter 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and directed.
30
-
-
S&F pre-painted galvalume aluminium zinc coating GI based corrugated coloured steel sheet, 0.50mm thick having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
350
-
-
S&F pre-painted galvalume aluminium zinc coating GI based plain steel coloured sheet, 0.50mm thick having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
30
-
-
M&L for Cutting holes (superficial area n exc 150 sq cm) into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.
240
-
-
S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
6
-
-
M&L for providing damp proof layer on all external walls up to cill level (outside) in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementanious powder applying at the rate of 1.50 kg/ Sqm of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and directed.
Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved.
120
-
-
M&L for Plain cement concrete, 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels or drains, complete all as specified directed.
3
-
-
M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc, complete all as specified directed.
50
-
-
M&L for strengthening of RCC members like col, parapet, facia, ceiling etc. by re concreting through guniting pressure including necessary scaffolding in the following step, complete all as specified and directed:-
(a) Removing all loose/ decayed concrete by chiselling for exposing the reinforcement carefully and without disturbing the reinforcement, and clean the surface by sand blasting to make it dust free.
(b) Providing addl reinforcement by welding with existing reinforcement to support the existing week/corroded bars.
(c) Provide mild steel 12 gauge welded wire mesh of size 100 x100mm size and fixed properly to decayed concrete surface by tack welding/binding.
(d) Apply a coat of primer with using Araldite epoxy resins (manufactured by M/s Ciba Geigy Ltd/ FAIR BOND EP/SIKA or other approved manufacture) (e) 35-40mm thick M-20 PCC, type A-0 (using 12.5mm graded stone aggregate) by guniting process using guniting machine at a pressure of 2 to 3 Kg/Sqm mixed with SC plasticiser as per manufacturer's instructions) including stripping, floating with wooden strippers for proper dimension control.
12
-
-
Contd/...
(f) 10mm thick plaster in cement mortar 1:4 mixed with liquid water proofing compound @ 3% by weight of cement).
NOTE : (i) All surrounding walls, joinery and fitting shall be covered with polythene sheet during work. (ii) Any damage by the contractor shall be repaired/changed without extra cost with entire satisfaction of Engg-in-charge . The decision of Engg-in-charge shall be final and binding in this regard.
(iii) Welded mesh & addl reinforcement if required shall be measured and paid separately under respective item.
-
-
-
M&L for mild steel TMT bars 6 mm to 8mm dia cut to length bent to shape required incl cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.
10
-
-
S&F welded steel wire fabric weight not exc. 4kg /Sqm complete all as specified and directed.
10
-
-
S&F in repair 15 mm dia stop valves cast copper alloy chromium plated long shank(concealed type), screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.
6
-
-
Excavating in post holes (or similar holes) in any type of soil each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm ,watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed.
31
-
-
M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
1.97
-
-
M&L for mild steel work for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.
635.97
-
-
M&L for Mild steel round bars 10mm dia and over as wire links at Top, middle, & bottom of chain link fencing for securing, cut to length bent to shape required including cranking bending for hooping, complete all as specified and directed.
162.28
-
-
S&F chain link fencing made of 4mm dia GI wire and mesh size not less than 75mm x 75mm including provision of MS binding wires or fixing with nut and bolts with angle iron post complete all as specified and directed .
Note : MS bolt, line wire (round bar) and MS angle shall be measured and paid separately under respective item.
153.51
-
-
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed.
216
-
-
Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed.
18
-
-
Taking down carefully sub main wiring (any nos of wire and size) with earth wire , any description with all accessories complete all as specified and directed.
120
-
-
M&L for modular point wiring for one light point/ fan point with 1.5 sq.mm FRLS PVC sheathed/insulated multi stranded 1100 volts grade copper conductor cable in PVC conduit complete all as specified and directed.
NOTE:-
(i) PVC conduit shall be of 20mm dia (min), medium class and with it's all accessories.
(ii) Terminal box shall sunken type and suitable for modular switch/sockets of appropriate modules. (iii) Modular sheet and cover of suitable modules shall be provided
(iv) Proper colour code shall be followed for Phase, earth and neutral wire.
(v) Cutting chases in wall (in case of concealed or resseced type point wiring), if required, shall be measured and paid separately under respective item here-in-after. (vi) Point wiring shall strictly as per relevant code.
(v) Rates of all material required/mentioned above shall deemed included in quoted unit rate except switches, sockets, fan regulators, ceiling rose, lamp holders etc.
114
-
-
All as per item No 131 above but with 2.5 sqmm cable for one 5/6 Amp socket outlet point on independent board .
48
-
-
All as per item No 131 above but with 2.5 sqmm cable for one 5/6 Am1p socket outlet point on the same board with other switch.
26
-
-
All as per item No 131 above but for one bell/buzzer point controlled by one bell push switch.
6
-
-
All as per item No 131 above but for two way point control by 2x two way 5/6Amp switches.
4
-
-
All as per item No 131 above but with 4.0 sqmm cable for one 15/16 Amp socket outlet point on independent board
6
-
-
All as per item No 131 above but with 4.0 sqmm cable for one 15/16 Amp socket outlet point independently (for Geyser & AC) controlled by one earth plug and socket box in lieu of sunken box, moduler plate and cover.(Except sunken box, moduler plate and cover) Note: Earth plug and socket box shall be measured and paid seperatly.
12
-
-
S&F Modular switch flush type, single pole, one way, 5/6 Amps 230 Volts complete all as specified and directed.
188
-
-
S&F Modular 2-way switch, flush type, single pole, 5/6 Amp 230 Volts complete all as specified and directed.
4
-
-
S&F Modular bell push, flush type, single pole, one way 5/6 Amp 230 volts complete all as specified and directed.
6
-
-
S&F Modular socket outlet, flush type, suitable for 5/6 Amp, 2 module complete all as specified and directed.
74
-
-
S&F Modular switch, flush type 16 amps, single pole, one way complete all as specified and directed.
18
-
-
S&F Modular socket flush type suitable for 6/16 A, 2/3 pin, 2 module complete all as specified and directed.
18
-
-
S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
24
-
-
S&F in repair 12 watt LED retrofit lamp, warm white complete all as specified and directed.
16
-
-
S&F LED retrofit Inverter lamp of capacity 9 watt, power backup up to 4 hrs B-22 holder base with polycarbonate body and aluminium heat sink warm white complete including taking down old/ unserviceable CFL/bulb complete all as specified and directed.
8
-
-
S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface Bakelite sheet 63.50mm dia complete all as specified and directed.
96
-
-
S&F electric bell ding dong type AC 230 Volts, 50 Hz single pole complete all as specified and directed.
6
-
-
S&F fan regulator, modular type, 120 watt single phase complete all as specified and directed.
18
-
-
S&F sheet metal enclosure/Distribution board for MCBs, double door type, epoxy powder coated, factory made, Single Pole and Neutral (SPN), 8 way 240Volts with 200 Amps rated bus bar, with enclosure blank plates for unused way complete all as specified and directed.
6
-
-
S&F MCB SPN, 40 Amps, 240V, 10KA, 'B' curve complete all as specified and directed.
10
-
-
S&F MCB SP, 6-32 Amps, 240V, 10KA, 'B' curve complete all as specified and directed.
61
-
-
S&F LED Mirror light fitting, 10Watt, 2 feet long including LED lamp and making connection complete all as specified and directed.
6
-
-
S&F LED bulk head light fitting, 9/10Watt, including LED lamp and making connection complete all as specified and directed.
Make : Havels cat part No. : RUGBYGENXFTS10WLED865SSYMBOPC
or equivalent of Bajaj & Philips
6
-
-
S&F LED tube light fittings, 18 watt fixed to wall, complete all as specified and directed.
Make : Havels cat part No. : ENDURALINEARNEOBS20WLED865SPCSS
or equivalent of Bajaj & Philips
14
-
-
S&F LED tube light fittings, 20 watt with inbuilt battery backup fixed to wall firmly, complete all as specified and directed.
12
-
-
S&F LED wall light fixture, suitable for 15W TU retrofit LED bulb complete with all accessories including LED lamp complete all as specified and directed.
Make :Havells Cat No : CITY 3, LHDL06160099 or equivalent of Bajaj & Philips
18
-
-
S&F Road lighting luminaire, 35 Watt complete including LED Lamps with all accessories and bracket made out of 25mm bore GI pipe (light grade), 1.20 m long made to shape and fixed to existing pole or bldg by means of 2 Nos mild steel flat iron 40x6mm clamps with suitable size bolt, nuts & washers complete all as specified and directed. Make :Havells Cat No : ENDURASUNDOWNSL35WLED765PASYBOPC
or equivalent of Bajaj & Philips
4
-
-
M&L for GI electrode chemical earthing including RCC earthing pit having 450 x 450 Cl chamber cover complete all as specified and as directed by Engineer-in-Charge.
The earting shall comprising the following:-
(i) GI electrode shall be high conductive, corrosion resistant, CPRI tested maintenance free having pipe in pipe technology based. The dia of primary conductor (inner pipe) and secondary conductor (outer pipe) shall be of 40mm and 80mm respectively. The space between secondary and primary conductor of earthing electrode shall be filled with crystalline compound. The length of GI electrode shall be minimum 3000mm (3 meters) (ii) Earth resistance values should not be less than 3 Ohm and but EN voltage 02 V.
(iii) Dia of earth pit's bore hole shall not be less than 200mm and minimum 3.50m deep.
(iv) Around the earth electrode, earth pit bore hole should be backfilled with minimum 50 Kg of ground enhancement compound ERIC containing mixture of Silica sulphate, Alumina, Iron Oxide, titanium Oxide, Calcium Oxide, Sodium Oxide, Zink Oxide etc.
4
-
-
Contd/... (vi) Length of electrode may be increased with connecting extra 25x4mm GI strip. The total depth should not less than 3.50m without any extra cost to the department. (vii) The testing for earth resistance shall be carried out in the presence of Engg-in-charge and report duly signed by contractor and Enng-in-charge shall be kept in record.
Note : If 3 Ohm earth resistance values is not achieved at site, the contractor will addition grid system to achieve the desired result without any extra cost to the department.
Make Remedies / MRS agency. Model G-80
-
-
-
M&L for sub main wiring with two single core FRLS PVC insulated unsheathed multistranded copper conductor of size 6 Sqmm nominal cross sectional area and one run as continuous earth wire of similar description, drawn in and including 20mm dia 'medium grade' PVC concealed conduits (with fittings), complete all as specified and directed.
NOTE: Two run of main wire and one run of earth wire with conduit shall measured as One unit length.
119.5
-
-
Taking down carefully existing ceiling fan by disconnecting all electrical connection, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.
(NOTE: Fans shall be deposited by the contractor in AGE E/M Varanasi yard).
18
-
-
S&F in repair new exhaust fan heavy duty, st,eel body with steel blads, 250mm sweep, single phase 240 volt including making electrical connection and writing MES No with black paint complete all as specified and directed.
NOTE: Existing exhaust fans shall be deposited by the contractor in AGE E/M Varanasi yard
12
-
-
S&F two pin and earth plug and socket with one MCB single pole 20 to 32amps 'B' series 10KA in sheet metal enclosure and connecting complete all as specified and directed.
6
-
-
Supply, Installation, testing and commisioning of factory made LT distribution board, size not less than 1000x1000x150mm, cubical type, made out of 3.15mm thick CRCA steel sheet, totally enclosed duly painted with two coats of powder coated paint over a coat of red oxide primer (spray painting), wall mounted/ semi grouted in wall with locking arrangement and provision of tapping for incoming and outgoing electric connections with suitable size of lugs complete all as specified and directed. The LT panel enclose shall comprising of the following accessories:-
(i) Copper bus bar chamber TPN of 200 amps rating - 01 Nos (Set of four strip). (ii) Phase indicating lamp - 01 Nos (Set of three). (iii) Voltmeter (0-500V), three phase, digital type with inbuilt selector switch -01 Nos
(iv) Ammeter (0-300 Amps) three phase, digital type with inbuilt selector switch incl CT's - 01 Nos.
(v) MCCB four pole 415 volts AC 50 Hz, 160 amps, 25 KA, fixed magnetic and adjustable thermal release - 01 No.
1
-
-
Contd/...
(vi) MCB two pole 415 volts AC 50 Hz, 40 amps , 25 KA, fixed magnetic and adjustable thermal release - 04 No. (vii) fixing and connection of existing energy meter - 04 nos
(viii) Name slip holder on each compartment for identification of Accn - 04 Nos
(ix) Earthing terminals - 02 Nos
(x) MCB SPN 20A 10 KA C series - 01 Nos
Note : LT panel shall factory made and shall be from one of the manufacture mentioned in the List of makes under PS.
-
-
-
S&F BLDC ceiling fan, 1200 mm sweep, BEE 5 star rated, 230 V, 50 Hz, single phase AC supply with remote or electronic regulator unit for speed control and all remaining accessories complete all as specified and directed.
18
-
-
Supply, laying and testing (in replacement) 1.1 KV XLPE insulated PVC sheathed armoured Aluminium LT cable with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed.
120
-
-
Excavation in trenches in soft/loose soil not exceeding 1.5 M wide and not exceeding 1.5 Mtr deep and getting out complete all as specified and directed.
23
-
-
Returning filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft soil complete all as specified and directed.
13
-
-
Removing excavated surplus soil not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.
10
-
-
M&L for sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand up to 18 cm thick and consolidation complete all as specified and directed.
Note : Punned thickness i.e 18 cm shall only be measured for payment purpose.
7
-
-
Supply and laying dry well burnt locally available brick sub class 'B' old size bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed.
0.74
-
-
M&L for boring hole for passing cable through / insertion of 80/50mm dia GI pipe under PCC road/ taxi track/ runway/ hard standing up to the depth 450mm to 1200 mm complete all specified and as directed.
NOTES :-
(i) Cost of equipments, tools & plants, material required for boring shall deemed to be included in quoted unit rates. (ii) GI pipe shall be measured and paid separately under respective item.
15
-
-
S&F for 40 mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hard standing complete all as specified and directed.
NOTE : Excavation and earth work shall be measured & paid separately.
20
-
-
Taking down/dismantling of LT Panel steel enclosure with MCCB/MCB of any capacity including disconnection of existing energy meters and making good disturbed surfaces of walls to match the existing complete all as specified and directed.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements