Military Engineer Services Tender

M&L for premix bituminous, macadam with binder content of 4% by weight of total mix using paving bitumen VG-30 grade, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed. Note- (i) Aggregates for Bitumnous works shall confirm to clause No 20 B 2.5 of SSR 2009 (Part-I (Specifications) with the following constrants :- Aggregate passing 26.5 mm IS Sieve- 100% Aggregate passing 13.20 mm IS sieve-60% to 80% Aggregate passing 4.75mm IS sieve-20% to 30% Aggregate passing 2.36 mm IS sieve-5% to 10%

M&L for Preparing of black top bituminous surfaces by brushing with brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with air pressure through air jet using air compressor to remove all loose dirt etc incl removing mud etc to a distance minimum 1.50m from edge of road and applying evenly a tack coat of bituminous primer using paving bitumen (VG-10) at the rate of 5 Kg per 10 Sqm of road surface by sprayer operated hot pressure mechanisum. bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content of paving bitumen (VG-30 grade) by weight of total mix, rolled and compacted, mixed in mechanical hot mixed plant and premixed material, laid with mechanical paver finished including rolling to required camber and gradient complete with 8 to 10 tone power roller to required compaction complete all as specified and directed.

Material and labour for painting lines, dashes, arrows letter, marking etc of 3mm thick film on new surface or previously treated road surface with hot applied retro-reflective thermoplastic road marking paint (white/golden/yellow) conforming to MORTH (Clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160°C including cleaning and drying the existing road surfaces to ensure dust, oil, grease and moisture free surfaces before applying the paint complete all as specified and directed. Make – Automark/Asian Paint/Berger

S&F in replacement metal tubular delineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 50mm dia mild steel pipe of 1200 mm height, duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector redium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4(150x150x300mm) type B-1 complete all as specified and directed.

Supply and fixing in replacement cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No DA 972.0 fixed with and including MS stud of suitable size as per manufactures instrucitons

Supply and fix in replacement solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mmx125mmx25mm shank 65mm) of high efficiency mono crystafie solar panel 2.4V/0.3 watt one Ni-ed rechargeable battery (1.2V/1600MA) conssisting of super bright LED with 10,000 to 18,000 mcd completed as per manufacturerers insturction etc all as specified and directed.

&F in replacement rubber speed breaker made from heavy duty rubber and polythylene with high resistance wear and tear property, height 3" for speed restriction, colours black and yellow combination, High reflective mark showing arrows in white marked on both side of yellow and black pieces, each side having end cap of size 250x500x75mm and middle size of the speed breaker as 500x500mm with four holes fixed with epoxy and heardner and bolts with epoxy and hardener as per manufacturers instructions complete all as specified & as directed.