Military Engineer Services Tender

M&L applying evenly a tack coat with bituminous primer using paving bitumen of grade VG-10 @ 5 Kg per ten square metre complete all as specified and as directed.

M&L Providing bituminous premix semi dense asphaltic concrete 30 mm consolidated thickness with minimum 5.5 % binder content by weight of total mix, using paving bitumen VG-30 using hot mix plant and laid by using mechanical paver, rolled and compacted with 8 to 10 tonne power roller to required camber and gradient complete all as specified and as directed. Note :- (i) Work shall be executed as per approved design mix from NABL Govt approved lab /Govt Engg College as decided by GE. (ii) Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to the Government.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. Note:- (i) Road marking work shall be carried out in accordance with manufacture's instructions and as specified. (ii) Refer MORTH specification of Para 803.4.2.1 and 800.4.2.2 on bituminous surface in white colour or yellow colour and super imposed with glass beads confirming to BS 6088 and MORTH specification Para 803.4.3.3

S&F reflective road studs made out of tough polycarbonate and its reflective lance shall be made with polycarbonate microprismatic, retro reflective panel Amber red or white colour two way reflective electronically welded to the body of stud and overall size 100 x100mm x20mm, the lower surface of studs will be supported with 2 Nos nylon shanks each of length not less than 20 mm and load bearing capacity 20 ton and fixed with epoxy adhesive in road complete all as per manufactures instructions complete all as specified and as directed. Make:-Dark eye Cat part No DA52 Road stud or equvalent model and make as approved.

S&F in replacement of solar road stud LED based made of aluminum alloy shall minmum size 125mm x125mm x125mm (shank 60mm) with antiwist and rib 100% water proof according to IP 65 (CPRI tested) high effeincy mono-crystalline solar panel 2.4/0.3 watt one Ni-mh or Nicd rechargeble battery (1.2 V 1600MA) six super bright LED,S with 10000 to 18000 mcd (milicandela) maintenace fre view distance upto 1000 meters flash rate 2 Hz bearable weight not less than 10 Tonne complete all as specified and as directed. Make:- Dark Eye Model DHRUV or equvilent model and make as approved.

Demolition of concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Surface execavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and directed

M&L broken stone or bolders hard core of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L 150mm thick cement conbcrete 1:1.5:3 type A-1 using 20mm graded stone aggregate as in flooring,laid in alternate ways including necessary use and waste of form work, surface finished top layer with broom complete all as specified and as directed.

M&L forming construction joint 30 mm deep x 10 mm wide filled with sealing compound grade B complete all as specified and as directed.

M&L for forming contraction (Dummy) joint 65 mm deep x 10 mm wide filled with sealing compound grade B complete all as specified and as directed.

M&L for forming 12 mm thick expension joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade A for 150 mm thickness of concrete slab complete all as specified and as directed,

M&L 80 mm thickness M-40 grade Machine pressed precast Concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 complete all as specified and as directed.

M&L 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring complete all as specified and as directed.

M&L 25 mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation for pole and cable etc and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and exceeding 1.5 m but not exceeing 3 m in depth, for foundation for pole and cable etc and getting out in soft/loose soil complete all as specified and as directed..

Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cm as in soft/loose soil complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M&L for natural river sand as cushioning of cables including spreading and punning down complete all as specified and as directed. Note : Punned thickness shall be measured for payment purpose

M&L cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in mass concrete or foundation of Pole complete all as specified and as directed.

M&L cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping of pole including necessary use and waste of form work complete all as specified and as directed.

M&L 40mm dia bore galvanised iron light grade for cable protection and sealing both ends complete all as specified and as directed. Make:- Tata/ Jindal/ Prakash Surya.

M&L 50mm dia bore galvanised iron light grade for cable protection and sealing both ends complete all as specified and as directed. Make:- Tata/ Jindal/ Prakash Surya.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type 1, flat, size 250mm x 150mm x 40mm laid in trenches for cable protection complete all as specified and directed.

Supply, laying, jointing and testing XLPE cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 25 sqmm 3.5 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed. Make:- Finolex/ Gloster/ Polycab

Supply, laying, jointing and testing XLPE cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 16 sqmm 4 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed. Make:- Finolex/ Gloster/ Polycab

S&F in replacment 70 watt LED street light fitting , 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

S&F in replacment 40 watt Post top lantern LED type, 230V, AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

S&F in replacment 120 Watt LED flood light, 230V, AC outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrsion resistant complete with driver and lamp complete all as specified and as directed.

M&L applying two coat of aluminium paint by brush and zebra painting with synthetic enamel paint of 20cm wide with black and white colour for 1 metre from bottom to LT pole 8/9 m long (above ground) including preperation of old painted surfaces complete all as specified and as directed..

S&F SMC (Sheet moulding compound) Junction boxes of size 280mm X 170mm X 130 mm depth. The box shall provided with and including 4 Nos, 100 Amps aluminum bus bar mounted on porcelain insulators including one No. MCB SP 230 Volts 6 Amps connecting the bus bars to cables with using suitable size galvanised iron nuts, bolts and washers and aluminum lugs etc fixed on pole using flat iron clamp made out of mild steel flat iron 30mmx5mm complete all as specified and as directed . Make:- Sintex /Siemens/L&T /Havells/Standard as approved

S&F bracket made out of 40 mm dia galvanised iron pipe light grade, 0.75 m long bent to shape and size fixed to location with and incluing mild steel clamp made out of flat iron 30mmx5mm with galvanised iron nuts,bolts and washers as required complete all as specified and as directed .

S&F 8.5 m long Steel tubular swaged poles type 410 SP-22 complete with cast iron base plate, finial taper plug, bolts, nuts and screws complete all as specified and as directed.

S&F 2.5 sqmm three core PVC insulated, unsheathed multistranded copper conductor cable 1100 Volt grade draw from junction box to street light fitting complete all as specified and as directed.

Supply, installation, testing and commissioning 3 phase and neutral, 415 volts outdoor type, factory made, free standing on MS angle legs, platform mounting, dust and vermin proof cubical type (Double door type) , fully compartmentalized design with 4 Nos of aluminium bus bar of 100Amps capacity. LT Panel to be fabricated from 3.15 mm thick CRCA MS sheet with epoxy polyester powder coating paint of shade Siemens Grey (RAL-7032), each including supply and fixing the following :- Incoming (a) MCCB 63A, 4 pole,415V, 25 KA, 3 Phase,microprocessor based with overload protection adjustable rating of 30% to 100% in variable time rating short circuit protection adjustable typ range 400% to 1000% with variable time setting , ground fault adjustable in range 10% to 40% of variable time setting - 01No (b) Ammeter 96 mm square digital type with selector switch and CT including necessary connection of suitable size of copper wire -01 set (c ) Voltmeter 0-500V -01 No digital type 96 mm square with selector switch including necessary connection with suitable size of copper wire - 01 set (d) LED indicator lamp(R-Y-B)- 01 set Outgoing (a) MCB SPN 10 Amps-01 No (b) Astronomical Timer relay alongwith 63 Amps TP Contactor and 40 Amps MCB for each circuit for street light-01 (c) MCB TPN 32 Amps-01 No

Earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx 6 mm thick buried direcly in ground vertically to a depth not less than 2.25 meters below normal ground level with the top edge of earth plate not less than 1.5 meters below ground level connected to galvanized iron strip 25mmx4 mm by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No.3 of SSR part I-2009 and earth wire protected by galvanized pipe light grade 40mm bore and through test point, filling of adequate quantity of charcol and common salt including necessary earth work and excavation in any type of soil, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in chamber with cast iron earthing pit cover having size 300 mmx300 mm, weight not less than 7.5 Kg conforming to relevant IS with frame complete all as specified and directed and testing on completion.