Military Engineer Services Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Healthcare and Medicine
Electrical and Electronics
Eprocure
Opening Date17 Jan 2025
Closing Soon25 Feb 2025
Tender Amount₹ 40,00,000
Costs
EMD
₹ 80,000Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Provn Of Room For Storing Ags Items, Modification To Exist Office At Amu, Provn Of Exhust Fans At Afsk, Provn Of 3 Phase Voltage Stablizers At Afnet , Phase Sequencer For Ot And Ct Scan And 3 Phase Connection At Patience Mess At 7 Afh Kanpur
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_693541_1Tender No
8734/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M & L for brick work with well burnt old size bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) brickwork should be in proper horizontal alignment mortar thickness should not be greater than 12mm all as specifed and directed by Engineer in Charge.
25.9
-
-
... More
M&L for RCC M-25 design mix as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete, complete all as specified. Concrete should have defined consistency and properly mixed as directed on site complete all as directed by Engineer in Charge
12
-
-
... More
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; lintel and similar work; vertical or to batter for rough finished surfaces of concrete. Formwork used should be made of new plank of timber with proper battening and bracing all as directed by Engineer in Charge.
68
-
-
... More
M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc. vertical or to batte all as directed by Engineer in Charge.
18
-
-
... More
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished flat surfaces complete all as specified.
63
-
-
... More
M&L for formwork to edges of concrete flats, treads, breaks in floors window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide for fair finished surfaces of concrete.
6
-
-
... More
M&L for RCC M-25 desgin mix as in columns, walls retaining walls basemetn walls and the like any thickness above top of footings including attached pilasters and buttresse complete all as specifed & directed by Engineer in Charge.
3
-
-
... More
M&L for RCC M-25 design mix as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed by Engineer in Charge
12
-
-
... More
M & L for mild steel bars 10 mm dia & over cut to length bent to shape required including, crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, quality confirming to TMT bars complete all as specified and directed by Engineer in Charge
2200
-
-
... More
All as per item No 12 here in before above but 6 to 8 mm dia as in stirrups
800
-
-
... More
Filling under floor with excavated material including spreading and levelling, watering and well ramming in layers n exc 25 cm thick complete all as directed by Engineer in Charge .
10
-
-
... More
M&L for 100 mm thick plain cement concrete type D-2, (1:4:8) using 40mm graded aggregate as in sub base surface finished fair and even complete all as directed by Engineer in Charge.
39
-
-
... More
S & F powder coated aluminium (minimum thickness of powder coating 50 micron) work for door with chowkhat/frame made with aluminium section with size 100x44x2mm thick and shutter of vertical style with section 84x44x2mm thick and top/middle/bottom rails of shutter made with 112x44x2mm thick over and including 5.5 mm thick tinted glass panes, including necessary fixing arrangement, joining cleats , glazing clips, rubber beading, floor door spring,tower bolts 200mm long, mortice lock 300 mm ,4 lever, rounded handles etc fixed to shutters complete all as specified and directed by Engr-in-charge.
5
-
-
... More
M & L for powder coated aluminium (minimum thickness of powder coating 50 micron) work for two track sliding window with frame of section No 20829 & 20830 of Jindal or equivalent make. The window shutters shall be of section No 20736 & 20738 of Jindal or equivalent make including supply and fixing 5 mm thick tinted glass, glazing clips, rubber beading alongwith roller, locking arrangement etc as required complete all as specified and as directed.
9
-
-
... More
M&L for Solid PVC frame (Single Rebated) of size 60mm x 30mm made ut of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing all as specified and directed by Engineer in Charge (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
5
-
-
... More
M&L for Factory made solid pannel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stile and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rail with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing to frame at site as per specification complete all as specified and directed.
2
-
-
... More
S & F 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed..
1
-
-
... More
S & F 150 mm long aluminium , anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
1
-
-
... More
S & F 150 mm long aluminium handles, cast type, anodised complete all as specified and directed.
2
-
-
... More
M&L for mild steel butt hinges medium weight of size 75mm ,ISI marked complete all as specified and directed by Engineer in Charge
3
-
-
... More
Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed by Engineer in Charge
1.1
-
-
... More
S & F sheet glass, 3 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as directed by Engineer in Charge
0.88
-
-
... More
M & L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.
130
-
-
... More
M & L for rendering 15mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.
90
-
-
... More
M & L, for rendering 5 mm thick on fair faces of concrete surfaces in cement mortar 1:3, finished even and smooth without usig extra cement all as directed by Engineer in Charge
40
-
-
... More
M&L for Non-skid heavy duty industrial tiles coloured 10 to 15 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.36 sqm, In floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over with and including 15mm thick screed bed in cm 1:6 complete all as specified and directed.
36
-
-
... More
M & L for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as directed by Engineer in Charge
5
-
-
... More
M & L for 75 mm thick cement concrete type C-2, 1:3:6 (using 40 mm graded aggregates) as in plinth protection surface finished even and smooth without using extra cement all as directed by Engineer in Charge.
39
-
-
... More
M & L for preparation of new undecorated surfaces of walls and applying 1 mm average thickness wall care putty to have surface even and smooth and applying two coat of Oil Bound Distemper over a coat of primer and , all as specified and directed.
90
-
-
... More
M & L for preparing new or unused plastered surface and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and as directed.
250
-
-
... More
S & F rotational moulded polyethylene water storage tanks (HDPE three layered) of capacity 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I(2009), including 300mm long 32/40mm overflow GI medium grade pipe all as specified and directed by Engineer in Charge.
1
-
-
... More
M & L galvanised steel water tubing 15mm bore medium grade with all fittings fixed complete to wall and ceiling or laid in floors all as specified and directed by Engineer in Charge
4
-
-
... More
All as per item 35 here in before but 20 mm dia complete all as specified and directed.
6
-
-
... More
S&F vitreous China wash basin, white or in matching colour of tiles , flat back, size 550 x 450 mm , excluding pillar tap 15 mm bore but including 32 mm dia waste coupling chromium plated brass and PVC waste pipe 750 mm long (Minimum), chain and plug and porcelain stopper, brackets for fixing any size, including cutting for and pinning in ends of brackets or erecting stand as directed by Eng in Charge
1
-
-
... More
Supply only pillar taps fancy type for 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as directed by Engineer in Charge.
1
-
-
... More
Supply , fix in repair pillar taps fancy type for 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as directed by Engineer in Charge.
1
-
-
... More
S&F 15 mm dia 450 mm long PVC connection including 02 Nos union on both ends screwed for iron pipes all as directed by Engineer in Charge.
2
-
-
... More
S&F bib taps 15mm bore, cast copper alloy, chromium plated, quarter turn screwed down, screwed for iron pipe or for brass ferrule and fixed all as directed by Engineer in Charge.
1
-
-
... More
S & F stop cock / angle valve cast copper alloy 15 mm bore fancy type chromium plated with crutch or butter fly handle screwed down high pressure for iron pipe or brass ferrule etc.all as directed by Engineer in Charge.
2
-
-
... More
S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as directed by Engineer in Charge. .
5
-
-
... More
S & F PVC (SWR) bends any radius 75 mm bore all as directed by Engineer in Charge.
2
-
-
... More
S & F PVC (SWR) plain floor trap 75 mm with grating including jointing with solvent cement all as directed by Engineer in Charge.
2
-
-
... More
S & F PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as directed by Engineer in Charge.
16.2
-
-
... More
S & F PVC (SWR) bends any radius 110 mm bore all as directed by Engineer in Charge.
2
-
-
... More
S & F PVC (SWR) junction single, (single T) equal or unequal 110 mm bore all as directed by Engineer in Charge.
1
-
-
... More
S&F PVC (SWR) vent cowl 110 mm bore all as directed by Engineer in Charge.
1
-
-
... More
S & F PVC (SWR) 'S'/'P' trap 110/110 mm bore all as directed by Engineer in Charge.
1
-
-
... More
S & F Vitreous China urinals, bowl type (back or corner wall type) , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement: fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe all as directed by Engineer in Charge.
2
-
-
... More
S & F Urinal partitions slabs terminating about 40 cm above floor line, fixed in repairs complete all as specified and directed.
1
-
-
... More
S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60 gms) complete all as specified and directed.
2
-
-
... More
M&L for Ball valves 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/2 0 mm - 210 g m s. /25 mm-455gms/40mm-690 gms) complete all as specified and directed.
2
-
-
... More
S &F 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
2
-
-
... More
M&L for Fancy type looking mirror full glass of size 45 cm x 60 cm with fixing arrangement with CP screw complete all as specified.
1
-
-
... More
M & L Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete complete all as specified and directed.
5
-
-
... More
M & L Preparation of new or previously untreated steel surfaces of any description, over 10 com width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
5
-
-
... More
Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sq mm 4 core complete all as specified and directed.
20
-
-
... More
Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sq mm 4 core complete all as specified and directed. .
10
-
-
... More
Supply and fix GI slotted cable tray 100 x 50 x 2 mm width including necessary supports & frame work all as specified and as directed.
10
-
-
... More
Supply & fixing cubical type vermin proof dust proof IP-44 factory made of CRCA sheet 2mm thick powder coated CPRI approved wall mounted LT electric distribution board totally enclosed with separate chambers for aluminium TPN bus bars of rating 1.5 times the capacity of incomer and digital volt and Ampere Meter complete internal wiring with suitable size of copper conductor multi standard. RYB LED indicating lamps etc. Suitable for 3 phase 415 Volt 50 Hz all as specified and directed by engineer in charge with the following (for package AC) all as directed by Engineer in Charge.
(a) Main incoming MCCB 3 pole 63 Amp 25 KA 415 V 50 Hz -01 Nos (b) Outgoing MCB 4 pole 40 Amp 10 KA 415 V 50 Hz -02 Nos
1
-
-
... More
Supply , install , commissioning and testing of Air Cooled Packaged Air Conditioners of nominal capacity of 8.75 TR, comprising of Hermetic/Semi - Hermetically sealed Reciprocating or Hermetically sealed Scroll Compressors with microprocessor based control, including copper refrigerant piping, electrical interconnection between indoor and outdoor units , suitable for operation on 407c / R-410a refrigerants and complete all as specified and directed.
2
-
-
... More
Supply and installation of supply air square ceiling diffusers, flush mounting , suitable for 4 way throw , core removable type powder coated with opposed blade damper. The frame and core shall be constructed from high quality aluminium profile with necessary hardware complete all as specified and directed.
0.9
-
-
... More
Supply and fixing aluminium extruded powder coated return/supply air grill with Volume control dampers with matching flanges horizontal fixed bar of 12 Nos. 1.2mm thick and 11.5 mm spacing with 0/15/30 degree deflection (ISI marked) complete all as specified and directed.
1
-
-
... More
Supply and fixing aluminium extruded powder coated return/supply grill without Volume control dampers with matching flanges horizontal fixed bar of 12 Nos. 1.2mm thick and 11.5 mm spacing with 0/15/30 degree deflection (ISI marked) complete all as specified and directed.
1
-
-
... More
Supply, assembly and erection of GI sheet with TDF flange rectangular/square duct made out of 'L' shaped hollow profile duly factory boxed including all accessories such as Corner, Cleat Carriage bolt, Gasket and appropriate sealant on longitudinl joints etc. complete of size 22 Gauge comprising of following as under:- (i) Ducts with reinforcement/strengthening.
(ii) Air tight joints. (iiI) Accessories such as splitter, damper, guide vane etc.
(iv) Hangers, Fastener and supports: Rectangular duct should be support from ceiling/wall with bracket/Gripple wire/Hanger etc. Selection should be as per site condition and drawing. (v) Painting with black colour paint for duct sides behind the grills. (vi) The gasket used in case for all ducts shall be fire retardant type.
24
-
-
... More
Supply and laying of thermal insulation of duct with 19mm thick nitrile rubber sheet insulation having density 50kg/cum and fixing with adhesive as per the recommendation of the manufacturer complete all as specified and directed.
25
-
-
... More
M&L for Providing Acoustic lining to the Supply/Return air duct by using resign Bonded Fiber Glass Wool with One Side factory laminated black glass woven cloth or black glass tissue. The density of insulation material shall of 32kg/m3 and thickness shall be 50mm Thick. Finally covered the insulation with 0.5 mm thick perforated aluminium sheet having approx 20-25% perforation with joints overlap and Screwed to the frame by means of brass metal screw. The perforated aluminium sheet shall be fixed by using GI nut bolts & washer to avoid metal contact. Coat of Primer Fevicol SR:998 contact glue shall be applied as per standard practice complete all as specified and directed.
8
-
-
... More
Supply & Fixing flexible canvass Connection for AHU's/package units to duct including zib superior quality complete all as specified and directed.
0.5
-
-
... More
Supply and fixing of GI. Volume Control Dampers with matching flanges complete complete all as specified and directed.
0.5
-
-
... More
M&L for concealed point wiring with PVC-FRLS insulated and unsheathed cable 1.5 Sqmm (Nominal area) multi-stranded copper conductor single core including PVC conduit medium grade of 20 mm dia concealed in walls and surface on ceiling with and including pressed steel concealed terminal boxes of appropriate size and top cover 3 mm thick of plastic laminated sheet ISI marked of desired colour , painting terminal boxes inside and outside with a coat red oxide primer complete with all accessories with and including 1.5 Sqmm PVC-FRLS insulated and unsheathed green colour multi-stranded copper conductor cable to common earth and connected to earth dolly complete all as specified and directed for the following points:- Note: Cutting chases in walls required for concealed conduit wiring shall be finished with cement mortar 1:4 and surface shall be matched with existing surface by using putty, plaster of paris etc. and applying finishing coat of existing treatment shall be deemed to be included in the unit rate quoted by the contractor: For One light/fan/bell/exhaust fan point controlled by one switch.
213
-
-
... More
One plug point on an independent board.
4
-
-
... More
One plug point on same board of light point.
2
-
-
... More
All as per item No. 1 here in before but for one power point, independent point with 2.5 Sqmm (Nominal area) PVC insulated and unsheathed copper conductor multi-stranded single core cable including green colour earth wire of size 1.50 Sqmm PVC insulated and unsheathed copper conductor multi stranded single core cable.
1
-
-
... More
M & L for sub main wiring with two single core 6 Sqmm copper conductor PVC insulated and unsheathed multi-stranded cable including PVC conduit medium grade of 25 mm dia, concealed in surface on walls for sub main connection and 2.5 Sqmm PVC insulated and unsheathed multi-stranded green colour copper conductor cable as a earth wire to common earth and connected to earth dolly complete all as specified and directed. Note: Cutting chases required for sub main wiring shall be finished with cement mortar 1:4 and surface shall be matched with existing shade of surface shall be deemed to be included in the unit rate quoted by the contractor.
25
-
-
... More
S&F of switch piano flush type 6 Amps single pole one way complete all as specified and directed.
217
-
-
... More
S&F of switch piano flush type 15 Amps 240 volts single pole one way complete all as specified and directed.
2
-
-
... More
S & F of socket outlet flush type , 5 pin 6 Amps, 240 Volts complete all as specified and directed.
4
-
-
... More
S & F of socket outlet 2 in 1, 6 pin 5 & 15 Amps, 240 Volts complete all as specified and directed.
2
-
-
... More
S & F of ceiling rose surface bakelite of three terminals 240 Volts complete all as specified and directed.
213
-
-
... More
S & F of fans ceiling complete with electronic regulator and accessories 230 Volt 1200 mm sweep BEE 5 star rated e
2
-
-
... More
S & F of sheet metal enclosure factory fabricated for MCB distribution board Single pole and neutral 240 Volts, 4 way with neutral and earth bus bar having IP-42 protection and double metal door concealed/flush to wall surface including making connections with thimbles as required complete all as specified and directed.
1
-
-
... More
S & F of MCB Single pole and neutral, 40 Amps, 10 KA, B curve, 240 Volts complete all as specified and directed.
1
-
-
... More
S & F of MCB Single pole 6 to 20 Amps 240 Volts, B curve, 10 KA, complete all as specified and directed.
2
-
-
... More
M & L for earthing with galvanised steel earth plate elect ode 600x600x6 mm thick buried directly in the ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below the ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts check nuts and washers of galvanised or steel all as specified or shown in electrical plate of SSR (Part-I) including necessary excavation, earth work, GI pipe 15 mm dia light grade for protection of galvanised iron earthing wire, GI pipe 20 mm dia light grade for protection of galvanised iron earthing wire, GI pipe 20 mm dia light grade watering pipe etc. including concrete chamber of PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) copping in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) internal surface of concrete chamber shall be plastered with 12 mm thick cement mortar 1:4 and 50 mm thick RCC cover in pre-cast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) duly reinforced with 8 mm dia 1 or bar @ 80 mm c/c both ways and charcoal dust, common salt etc. including testing after completion all as specified and directed.
1
-
-
... More
Supply and Fixing complete for recess mounting LED Panel 600x600 mm fittings made of CRCA powder coated finish LED used shall be SMD type and fixtures should have minimum efficiency at system level (Not chip level) 100 Im/watt ,life of fixture 50000 burning hours @ L-70% Lumen maintenance CCT up to 6500 CRI more than 80, PF 0.95 and operating voltage 140 volt to 270 volt internal surge protection 2.5 KV as IS 10322 and IEC 60598 system wattage 31-36 watt complete electronic driver with all internal electronic connection complete all as specified and directed.
6
-
-
... More
M&L for GI pipe medium grade ISI marked with all necessary fittings laid in trenches/floor / wall or ceiling of size 20 mm bore complete all as specified and directed by Engineer in Charge.
12
-
-
... More
All as per item No 88 but size 25 mm bore
21
-
-
... More
S&F in replacement of Gun Metal Gate valve ISI marked with Iron wheel, head screwed bothe ends for Galvanised Iron pipe for sizes 20 mm borecomplete all as specified and directed by Engineer in Charge.
65
-
-
... More
Supply Laying and testing of LT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sq mm 2 core laid in trenches / duct / laid on wall etc. incl. end termination suitable size lugs , thimbles glands nuts bolts, washers, insulation tape etc. complete all as specified and directed.
1
-
-
... More
Dismantling and taking out of tubular poles 9 mtr long swaged type carefully alongwith cast iron base plate, final taper plug, bolts, nuts & screws etc complete all as specified and directed.
1
-
-
... More
M & L for new tubular poles 9 mtr long swaged type complete with cast iron base plate, final taper plug, bolts nuts & screws etc. incl making connections complete with painting with 1 coat primer, 2 coats aluminium paint and writing number incl. PCC 1:4:8 type D2 using 40mm graded stone aggregate for foundation, filling and mass concrete and PCC 1:2:4 type B1 using 20mm graded stone aggregate for coping of pole all as specified and directed.
1
-
-
... More
Material & Labour for mounting bracket made out of galvanized iron medium grade of 40mm bore of pipe bended into required shape and size of 1.5 mtr including necessary flat iron clamps made out of 25x4 mm flat iron, nuts, bolts & washers suitable for steel tubular pole/on wall and painting of clamps, brackets etc. complete including making necessary connections complete all as specified and directed.
1
-
-
... More
S&F street light junction box 225 mm x 295 mm x 122 mm comprising of 4 nos of aluminium bus bars of suitable rating mounted on epoxy insulators with holes for incoming and outgoing cables, 2 Nos of MCB 16 A SPN , 2 nos cable gland and provision for inserting wires with suitable mounting arrangement on street light pole with MS clamps junction box having IP 66 protectio complete all as specified and directed.
1
-
-
... More
Supply and Fixing of PVC insulated wire copper conductor 1.5 Sqmm 3 core connected with street light to junction box for steel tubular pole complete all as specified and directed.
15
-
-
... More
S&F energy saving & environment friendly LED street light fittings made out of pressure die cast anodized aluminium housing of rating 90 watt with efficiency polycarbonate UV stablized cover with integrated lens to ensure asymmetrical light, IP 65 protection complete all as specified and directed.
1
-
-
... More
M&L RCC NP3 150 mm diameter Pipes laid on 150 mm thick P.C.C. (1:4:8) bed cradle with at depth 0.70 m to 1.65 m excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional.
20
-
-
... More
M&L Soakage wells of dia 1.2 m and 3.0 m depth excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM (1:6), RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size all as directed by Engineer in Charge
1
-
-
... More
M & L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as directed by Engineer in Charge.
2.5
-
-
... More
M & L PCC type B1 (1:2:4) using 20 mm graded stone aggregate in copings / benchings , string courses and the like including weathering, slightly rounded of chamfered angles and throating, as directed.
1
-
-
... More
S & F Phase sequence corrector cum protection system 415/440 Volt, 50 Hz with overload & short circuit protection, Contactor MNX suitable for 250 Amp load for phase sequence correction in motorized application, phase sequence relays of suitable capacity with complete wiring with copper wire of suitable size complete with incoming and out going cable connection with lugs, cable glands along with incoming MCCB of suitable size in a outdoor feeder pillar box of 3.15 mm thickness CRCA sheet factory made powder coated (CPRI approved) with in built by pass arrangement on panel all as specified and directed. Note:- (i) Panel shall be mounted on brick work plate form duly plastered and PCC copping work on top surface, height shall be 0.60 m above the GL and 0.40 M all around the FPB all as per direction of Engr-in-Charge. (ii) All incoming and out going cables shall be connected with suitable size of cable luggs and cable galands, Earthing terminals to be provide on panel.
1
-
-
... More
S & F Phase sequence corrector cum protection system 415/440 Volt, 50 Hz with overload & short circuit protection, Contactor MNX suitable for 200 Amp load for phase sequence correction in motorized application, phase sequence relays of suitable capacity with complete wiring with copper wire of suitable size complete with incoming and out going cable connection with lugs, cable glands along with incoming MCCB of suitable size in a outdoor feeder pillar box of 3.15 mm thickness CRCA sheet factory made powder coated (CPRI approved) with in built by pass arrangement on panel all as specified and directed. Note:- (i) Panel shall be mounted on brick work plate form duly plastered and PCC copping work on top surface, height shall be 0.60 m above the GL and 0.40 M all around the FPB all as per direction of Engr-in-Charge. (ii) All incoming and out going cables shall be connected with suitable size of cable luggs and cable galands, Earthing terminals to be provide on panel.
1
-
-
... More
Taking down & Re laying of LT cable obtained of any size and description. (Excavation , earth work, sand cushioning, bricks etc shall be included in quoted rates.)
14
-
-
... More
Supply & Laying in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 185 Sqm 3.5 core complete all as specified and directed by Engr-in-Charge.
10
-
-
... More
Supply & Laying in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 120 Sqm 3.5 core complete all as specified and directed by Engr-in-Charge.
100
-
-
... More
Supply and laying XLPE insulated amoured heavy duty electric cabel with alumnium conductor 1100 volts grade corss sectional area 50 sqmm 3.5 core complete all as specified and directed by Engr-In-charge.
230
-
-
... More
S & F sheet metal enclosure with 4 pole MCCB 63 amp 16 KA capacity wall mounted type with fixing arrangement in wall / angle iron frame incl welding work etc including making electrical connections and copper lugs to be provided at outgoing side of MCCB complete all as specified and directed.
1
-
-
... More
M & L for LT panel board outdoor type factory made and tested (CPRI approved) 415 volts 3 phase 4 wire 50 Hz AC supply having busbar chamber 400 Amps Aluminium strip TPN , installed on porcelain insulators, and copper conductor wiring, the panel shall be dust and vermin proof and made up of 3.15 mm CRCA mild steel sheet and 50x50x6 mm thick angle iron frame work, powder coated finish over one coat of red oxide primer out side and in side, front and rear opening type with aprons for cable entry with double door shutter and locking arrangement, internal wiring with PVC insulated solid copper conductor FRLS cables, IS-694 marked of adequate size but not less than 4 sq mm and suitable to accomodate and include the following acessories:- (a) INCOMMING:- (i) MCCB 4 pole 250 Amps 36 KA- 02 Nos. (ii)Volts meter digital type 0-500 Volts complete with selector switch - 02 Nos. (iii) Amps meter digital type complete with CT and selector switch- 02 Nos. (b) Change over switch 400 Amps - 01 No.
1
-
-
... More
(c) OUT GOING :- (i) MCCB 200 Amps 4 Pole 25 KA adjustable type -01 Nos.
(ii) MCCB 160 Amps 4 Pole 25 KA adjustable type -02 Nos.
(iii) MCCB 100 Amps 4 Pole 25 KA adjustable type -02 Nos.
(iv) MCCB 63 Amps 4 Pole 25 KA adjustable type -04 Nos.
(v) Indicating lamps on each out going and incoming feeders. Note:- (i) Panel shall be mounted on brick work plate form constructed with cement mortar (1:6) duly plastered and PCC copping work in (1:2:4) type B0 using 12.5mm graded stone aggregate on top surface, height shall be 0.60 above the GL and 0.40 m all around the FPB all as per direction of Engr-in-Charge. (ii) All incoming and out going cables shall be connected with suitable size of cable luggs and cable galands etc.
-
-
-
... More
S & F Voltage stablizer servo controlled suitable for automatic operation, three phase, floor mounted, naturally oil cooled & designed for input variation between 300 Volt to 480 Volt with output voltage stabilized at 415 V with accuracy ± 1 % and speed of correction not less than 6 volts per second for single phase and 13 volts per second for phase to phase of capacity 100 KVA conforming to IS. 9815 (Part-I) / 1994 (Reaffirmed 2019) with latest amendments with first filling of Transformer grade Oil confirming to IS: 335/IEC 296 and with necessary by pass arrangement by means of suitable capacity change over switch, fully automatic operation mode. All the three phases will be corrected independently, Suitable for Balanced or 100% Unbalanced Supply, Suitable for Balanced or 100% Unbalanced Load. The stabilizer should be designed as per tropical condition of 7 AFH, Kanpur. The stabilizer should have MCCB for OL & SC protection , Input phase reversal, Input single phasing Protection and phase sequence changing protection. LED indications for each phase input , each phase output, short circuit, and over load complete all as specified with following parameters and accessories as under :-
1
-
-
... More
(a) Input voltage Range:- 300 V to 480 V, 3 phase/4 wire AC, 50 Hz (b) Output Voltage:- 415 V ± 1 % (c) Frequency Range :- 50 Hz +/- 0.5% (d) Wave form distortion :- Nil and Output Wave form / td :- true (e) Response Time :- Less than 10 ms (f) No load current : Not more than 5 % of rated output current (g) Efficiency :- not less than 95 % (h) duty cycle: Continous 24x7 (j) Metering : Digital Input voltmeter with selector switch , Digital output voltmeter with selector switch, Digital Ammeter for R , Y, B input currents with selector switch (k) Cooling : Oil cooled Natural (l) Degree of Protection : IP-30 types. (m) Ambient temperature operation from -20° C to 50° C (n) Copper wound in CRGO laminations variable Auto transformers one for each phase. (o) Heavy duty AC synchronous motor for individual phase correction. (p) Solid-state electronic plug in PCB circuits for control. (q) Copper wound in CRGO laminations buck/boost transformer for each phase. (r) Control circuits for individual phase control. (s) Four nos. bi-directional detachable rollers of plan solid cast steel. (t) Protection: Single Phasing Prevention, Output Electronic Overload Protection, Phase reversal protection, Output Low and high Voltage Protection and Surge suppressor Protections (u) Rating Plate (v) Standard BIS Mark.
-
-
-
... More
In addition to above the stabilizer should be provided with Two Nos. Earthing terminals, Cable end boxes for incoming and outgoing side for terminating cables, Oil level indicator, filling & drain valve, lifting lugs, provision for Auto/Maanual control from the front panel. Complete all as specified and as directed by Engr-in-Charge. Note: (a) Any other relevant accessories as required at site as per IS to be provided. (b) Contractor should submit general arrangement drawing, drawing of combined name plate and technical details sheet to GE before purchase. (c) Stabilizer shall be provided with suitably rated MCCB/MCB and rate of necessary control and control wiring shall be inclusive of the quoted rates (d) Rate of first filling of transformer oil is inclusive of quoted rates.
-
-
-
... More
Supply and Laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor , 1100 volts grade cross sectional area 25 Sqmm 4 core complete all as specified and directed by Engr-in-charge.
200
-
-
... More
Supply, install , testing and commissioning of phase sequence corrector LT panel with 3.15 mm CRCA sheet factory fabricated body with powder coated outdoor type having suitable size canopy including mounting 60 cm above ground on MS angle iron frame of size 50mm x 50mm x 5mm including suitable size PCC platform complete with incoming and outgoing cable connection with lugs, suitable control wiring, cable glands with and including following complete all as specified and as directed:- (i) 400 amp cap Aluminium bus bar TPN (ii) Single phase preventor - 01 No (iii) Voltmeter, ammeter, frequency meter digital type (VAF meter) with CT coil and selector switch- 01 set (iv) Timer relay- 01 No (v) Control fuse 6 Amp - 04 Nos (vi) LED indicating lamp 04 Nos (vii) Auto/ manual selector switch including control wiring complete of 1100 volts, 50 Hz internal working voltage 12/14 volts, suitable for 100 KVA capacity load including 200 Amp contactor 02 No (viii) MCCB 250 Amps 4 pole 36 KA - 01 No for auto change of phase sequency adjustable low and high voltage protection system to protect the machinery
1
-
-
... More
S & F ventilating fan of 250mm sweep, including making necessary electrical connection complete all as specified and directed.
205
-
-
... More
M & L for making circular/rectangular holes suitable for fixing of 10" sweep Exhaust fans/ ventilating fan, by cutting the wall any thickness/ required circumstances for exhaust of air and including grouting of rag bolts and nuts complete including finishing of disturbed surfaces by using cement mortar 1:3 complete and coating of existing colour paint to match the existing surface complete all as specified and directed.
205
-
-
... More
S & F ceiling fan of 1200mm , BEE 5 Star rating sweep complete with fan blade , down rod, electronic regulator 5 step , 240 Volt complete all as specified and directed.
1
-
-
... More
Surface excavation not exc. 30 cm deep and average 15 cm deepand getting out complete all as specified and directed.
40
-
-
... More
Excavation in trenches soft & loose soil) n exc, 1.5 m wide and n exc 1.5 m ub depth for laying of UG cable including getting out all as specified & directed by Engr-in-Charge.
118.78
-
-
... More
Returning, filling in, including spreading, levelling, watering & well ramming in layers n exc 25 cm with any type of soil all as directed by Engineer in Charge.
76.62
-
-
... More
Removing excavated material n exc 50 m and depositing where directed at all level n. exc 1.50 m above the starting point all as directed.
63.15
-
-
... More
Supply and spreading ganga sand dry, clean in trenches as cushioning to underground electric cable provided with a layer of 80 mm deep before laying and 150 mm over cable laid in trenches complete all as specified and directed. Note Punned thickness shall be considered for measurement purposes.
24.63
-
-
... More
M&L for well burnt brick sub class B old size of 23 cm x 11.5 cm x 7.5 cm laying intrenches for cable protection complete all as specified and directed.
5120
-
-
... More
M&L for cutting of PCC/Hard standing/WBM road not exceeding 30 cm in width & not exceeding 60 cm in depth for passing of LT cable and making good for disturbed surface to match with the existing surfaces by using old and new material upto 15 cm in depth and 15 cm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate complete all as specified and directed.
16
-
-
... More
Supply and Laying in trenches / floor or fixed to pole /wall GI pipe light grade 50mm bore with fitting for protection of cable complete all as specified and directed.
9
-
-
... More
Supply and Laying in trenches / floor or fixed to pole /wall GI pipe light grade 40mm bore with fitting for protection of cable complete all as specified and directed.
18
-
-
... More
M & L for earthing complete with GI earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.50 m below normal ground level, connected to GI strip of size 32x6 mm as earth lead up to test point with suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregates , 40 mm thick precast RCC cover in 1:2:4 reinforced with expanded metal (weight not less than 4kg/sqm), and frame of angle iron 25x25x6 mm with lugs 02 nos with 6 mm dia MS bar handle made to shape, excavation and earth work in any type of soil and including light grade GI watering pipe 20 mm bore with funnel and wire mesh and light grade GI earth wire protection pipe 40mm bore upto main board complete as shown in electrical plate no 3 of MES schedule Part-I, connected to earthing testing point and testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) The unit rate includes GI pipe up to 7.5m for protection of earth lead. (ii) The unit rate includes main earthing lead/strip from earth electrode to test point up to 7.5 meter
14
-
-
... More
M & L for earth continuity conductor or main earthing lead/strip fixed to wall or burried in ground or drawn in conduit (pipe/fixed to poles) of any type or any other situation for loop earthing etc with GI strip of size 32 x 6 mm complete all as specified and as directed by Engr-in-charge.
20
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%