Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date26 Nov 2024
Closing Date17 Dec 2024
Tender Amount₹ 46,80,000
Costs
EMD
₹ 93,600Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_680015_2Tender No
GE/JHA/TOK/75 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
M&L for plain cement concrete (1:2:4) Type B-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete for embedding post complete all as specified as directed
4.2
-
-
M&L for joint free, Vitrified Ceramic tiles of light shade 8 to 10 mm thick (square/rectangular) polished , area of each tile exc 0.42 but n.exc 1.00 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.
110
-
-
All as per item No.-05 here-in-above but on vertical surfaces such as skirting/dado over and including 10mm thick rendering in CM 1:4, complete all as specified and as directed.
11
-
-
M&L for non skid ceramic coloured tiles , 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed.
10
-
-
M&L for ceramic colour tiles in vertical surface of size 350 X 250 x 7/600x300x7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as specified and as directed.
60
-
-
M&L for heavy duty exterior tiles of light shade 8 to 10 mm thick, polished , area of each tile n exc 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.
120
-
-
M&L for heavy duty coloured steps tiles dark shade 8 to 10 mm thick polished , area of each tile exc 0.42 but n.exc 1.00 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.
80
-
-
M & L for Granite (of any type) tiles 16-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
80
-
-
Ditto as per item No. 11 here-in-before but in skirting over and including 10 mm thick backing coat in CM 1:4 complete all specified and directed.
8
-
-
Dismantling stone slabs and tiles of any description or thickness laid , bedded and pointed in any mortar as in floors, aprons etc. complete all as specified and directed.
2.35
-
-
M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
10
-
-
M & L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.
1.5
-
-
M&L 16-20 mm thick granite slab of any type , tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all specified and directed.
12
-
-
Demolition of brick work built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as specified and directed.
7.3
-
-
M&L for brick work with old size fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.
7
-
-
M&L for half brick thick wall with old size fly ash bricks, straight or curved on plan to any radius built in cement mortar 1:4, complete all as specified and directed.
20
-
-
M&L for 10 mm rendering thick in CM (1:6) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement), complete all as specified and directed.
57
-
-
M&L for rendering 15mm thick in two coats (1st coat 10 mm thick in CM 1:6 & 2nd coat 5 mm thick in CM 1:4 with WPC ) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed. Notes: WPC in 5 mm thick 2nd layer plaster measured and paid separately.
22
-
-
Supply only liquid water proofing compound, mixed in CM as per manufacturer instruction, complete all as specified and directed. Make : Dr Fixit LW+ or equivalent
1
-
-
M & L 25 mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations, kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including designer edge binding tape of required width, including dismantling of old cupboard boarding of any description all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges shall be paid separately)
25
-
-
M & L 18 mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations, kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including designer edge binding tape of required width, including dismantling of old cupboard boarding of any description all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges shall be paid separately)
25
-
-
M&L for second class hard wood plain, solid, straight chowkhats and frame, wrought framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixing, complete all as specified and directed.
0.12
-
-
S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 40 mm, complete all as specified and directed
32
-
-
S & F brass drawer/shutter handles fancy type , projection drop (50mm to 65mm) on screwed platey complete all as specified and directed
20
-
-
Dismantling asbestos cement (corrugated or semicorrugate etc) sheet in roof covering, complete all as specified and directed.
159
-
-
Dismantling framed timber scantling 40.0 sqcm and over in section in any position as in framed / unframed works such as roof purlins, rafters, fillets, ridges etc as in roof/ ceiling, complete all as specified and directed.
0.64
-
-
Dismantling framed timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.
105
-
-
M&L for structural steel Fe-410-W(Gde-E-250) quality A for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed.
2190
-
-
S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed.
225
-
-
S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 150 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and directed.
12
-
-
S & F Plain, galvanised, mild steel sheeting 1.0 mm thick , in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
27
-
-
Dismantling of wall / ceiling boards (fiber, pulp, insulation etc) / insulation boards /slabs/blankets of any thickness including cover fillets etc, complete all as specified and directed.
190
-
-
S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5mm dia GI wire from roof/Slab/truss incl wall/perimeter runner/channel of 15 mm size with and incl 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm, duly fixed in ceiling frame work, complete all as specified and directed.
100
-
-
M & L for Gl frame work of grid size 605x605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including supply and fixing 10-12 mm thick seamless finish plaster of paris ceiling (Gypsum anhydrous) to flat surface over and including metal frame work including putty, applying interior acrylic emulsion etc. complete all as specified and directed.
90
-
-
Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each complete all as specified and as directed.
29
-
-
All as per item No. 38 here-in-above but not exc 1.5 sqm each complete all as specified and as directed.
2
-
-
Taking down shutters of any description not exc 01 Sqm each, complete all as specified and directed.
10
-
-
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm (± 5 mm tolerence in dimension) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners incl in this item of required dia and length complete as per direction of Engineer-in-Charge.
30
-
-
S&F Factory made single 35 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.
8
-
-
M&L 30mm thick factory made solid WPC (Wood plastic composit) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fie again of the shall be as per manufacture instruction complete all as specified and complete all as specified and complete all as specified and directed.
4
-
-
S&F of aluminium alloy anodized sliding door bolt 300mm (aldrop bolt) length with hasp staple and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all specified and directed
6
-
-
S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21 anodized complete all specified and directed
18
-
-
S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed.
12
-
-
S&F of 150mm aluminum handle cast type anodized complete all specified and directed.
12
-
-
S&F of mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and directed
2
-
-
S&F of 140 mm door stopper of aluminium body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed.
6
-
-
M&L for powder coated ( minimum thickness of powder coating not less than 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates, fabricated out of powder coated aluminium hollow square or rectangular section of required size incl necessary joining cleats, fixing screws etc complete, having size of frame for doors 100mm x45mm x 3.18 mm thick; for window 104mm x 45mm x 3mm thick; for ventilators 59mm x 33mm x 2.5mm, complete all as specified and directed.
45
-
-
M&L for powder coated ( minimum thickness of powder coating not less than 50 micron) aluminium door shutters, aluminium section for top rail and styles 85mm x 45mm x 2.0mm thick; bottom rail 100mm x 45mm x 2mm thick and lock rail 100mm x 45mmx 2.0mm thick incl necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, incl powder coated aluminum hinges, powder coated aluminum snap beading, screws, handle , particle board, ACP sheet etc, complete all as specified and directed.
6
-
-
S&F of glass, tinted type, 5.5 mm thick, each panes not exc 0.5 sqm, suitable for aluminium window / Ventilators / door opening and similar work, complete all as specified and directed.
5.4
-
-
S & F brass Mortice lock, vertical type, size 100 mm, 4 Lever Type Duly fixed to Aluminium door complete all as specified and directed.
3
-
-
M & L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
3
-
-
S & F in repair aluminium (Extruded section) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 60 to 80 kg complete all as specified and as directed.
3
-
-
S&F powder coated ( minimum thickness of powder coating not less than 50 micron) aluminium window shutter (three track shutter) sliding type with frame of powder coated aluminium channel section suitable for sliding aluminium shutters weighing 0.55Kg/M of three channel including necessary joining cleats glazing clips rubber packing Powder coated aluminium shop beading screws with two shutter Including 5mm thick coloured glass and one shutter with wiremesh of 0.56 mm in nominal dia of wire average width of aperture 1.18 mm, including necessary locking arrangement and handle etc; as specified etc complete all as specified and directed.
107
-
-
S&F of 4 mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, duly fixed metal clip /bidding as required, complete all as specified and directed.
48
-
-
S&F of stainless steel wire cloth 0.56 mm in nominal dia of wire average width of aperture 1.18 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed.
48
-
-
M&L for powder coated ( minimum thickness of powder coating not less than 50 micron) aluminium ventilator shutters, louver type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc, complete all as directed.
11
-
-
S&F of 3 mm thick sheet figured glass pin headed type, not exc 0.50 sqm in each pane, duly fixed with metal clip/ beads as required, complete all as specified and directed.
7.7
-
-
S& F toughned glass transparent type as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, including chrome or SS finished profile, roller hanger, patch fitings, hinges, handle, handrails etc and other necessary fixture and fittings as required to make arrangements fully functional complete all as specified and directed.
24
-
-
S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
2
-
-
S&F of PVC waste pipe 32 mm dia 750 mm long with for wash hand basin or for kitchen sink, complete all as specified and directed.
2
-
-
S&F PVC floor trap of 75 mm outlet, jointing to waste pipe, complete all as specified and directed.
2
-
-
S&F of ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and directed.
6
-
-
S&F of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and directed.
6
-
-
S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and directed.
6
-
-
S&F of PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and directed.
6
-
-
S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.
2
-
-
S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.
2
-
-
S&F SS grating of round shape dome type 4" to 5", floor trap traps etc, complete all as specified and directed.
2
-
-
S & F 15 mm bore Galvanized Steel tubes, medium grade fixed to walls and ceilings or laid in floors, concealed or open incl cutting of grooves including taking up or down with connections and fittings all as specified and directed
20
-
-
S & F in repairs 15 mm bore Bib taps long body fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
4
-
-
S & F in repairs 15 mm bore stop/angle cock fancy type,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
2
-
-
M&L in repair for stainless steel curtain rod 25mm dia with fancy caps/lobs and wall mounting bracket cutting in to length required at site complete all as specified and directed by Eng-In-Charge
Note: Bracket and end caps/lobs are included in quoted rate.
55
-
-
S&F in reapir Health faucet (ABS Body) chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified with wall flange made of cast copper alloy, complete all specified and directed.
2
-
-
M&L for 5 mm rendering thick in CM (1:3) on fair faces of concrete surfaces in ceiling finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirting etc including racking out joints hacking for key scrubbing down with water etccomplete all as specified and directed.
40
-
-
M&L for preparation of new plastered of ceiling surface and applying two coats of interior acrylic emulsion, over a coat of chalk whitening primer over and incl a layer 3mm thick of wall care putty on ceiling to get even and smooth level finish on new plastered surface of ceiling surface, complete all as specified and as directed.
40
-
-
M&L for 10 mm rendering thick in CM (1:6) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirting etc including racking out joints hacking for key scrubbing down with water etccomplete all as specified and directed.
100
-
-
M&L for preparation of new plastered of wall surface and applying two coats of interior acrylic emulsion, over a coat of chalk whitening primer over and incl a layer 3mm thick of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed.
142
-
-
M&L for rendering 15mm thick in two coats (1st coat 10 mm thick in CM 1:6 & 2nd coat 5 mm thick in CM 1:4 with WPC) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirting etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. Note: WPC in 5 mm thick 2nd layer plaster measured and paid separately.
50
-
-
M&L for preparation of surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint (weather proof) of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. complete all as specified and directed.
Note : The contractor shall produce batch certificate & delivery challans directly from paint manufacturer to establish the authenticity of the material. The batch testing certificate shall be brought at the site along with paint manufacturer's drums with seal intact.
72
-
-
M&L for complete removal of existing treatment and preparation of surfaces of walls by scrapping/sand paper rubbing and finally washing with watering and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint (weather proof) of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. complete all as specified and directed.
Note : The contractor shall produce batch certificate & delivery challans directly from paint manufacturer to establish the authenticity of the material. The batch testing certificate shall be brought at the site along with paint manufacturer's drums with seal intact.
1000
-
-
M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated surfaces of wall and applying two coat of interior acrylic emulsion over a coat of chalk whitening primer, over a layer of (JK/Birla) 3.0 mm thick wall care putty to get smooth and level finish, complete all as specified and directed.
650
-
-
M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated ceiling surfaces and preparation of ceiling surface and applying one coats of interior acrylic emulsion, over a coat of chalk whitening primer over and incl a layer 3mm thick of wall care putty on ceiling to get even and smooth level finish on new plastered surface of ceiling surface, complete all as specified and as directed.
200
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
8
-
-
S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
800
-
-
M&L for preparation of new steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed
164
-
-
Supply & Fix stainless steel magnetic catcher fancy type for kitchen cabinet / drawer complete all as specified and directed by Engineer-in-Charge.
20
-
-
Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in hard/ldense soil complete all as specified and directed by Engineer-in-Charge.
75
-
-
Excavation of post holes in hard/ldense soil each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25 cm, watering, levelling and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed by Engineer-in-Charge.
14
-
-
M&L for PCC (1:5:10) type E2 as in foundation (40 mm graded agg) as in foundations, filling on mass concrete for Post holes, Pillars,columns complete all as specified and directed by Engineer-in-Charge.
0.57
-
-
S& F Steel work in tubular/ hollow section trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed by Engineer-in-Charge.
1400
-
-
M&L Hardcore of gauge n.exc 63mm brokan stone or boulder, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.
9
-
-
M&L 100mm thick PCC 1:3:6 type C-2 using (40mm graded aggregate) as in sub base floor complete all as specified and directed by Engineer-in-Charge.
120
-
-
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engineer-in-Charge.
121
-
-
Supply & Fix welded steel wire fabric not exc 4 Kg per Sqm fixed to wood or steel members complete all as specified and directed by Engineer-in-Charge.
2
-
-
M&L 100mm thick PCC 1:4:8 type D-2 using (40mm graded stone aggregate) as in sub base floor complete all as specified and directed by Engineer-in-Charge.
5
-
-
M&L 40mm thick PCC 1:2:4 type B-1 using (20mm graded stone aggregate) as in sub base floor complete all as specified and directed by Engineer-in-Charge.
5
-
-
S & F 38mm wide and 3mm thick glass dividing strips inserted in position complete all as specified and directed
4.5
-
-
M & L for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and directed
15
-
-
M&L for 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and as directed. (Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.)
8.5
-
-
S&F 25mm thick lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing complete all as specified and directed
31
-
-
S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed
55
-
-
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, removing materials for taking credit and making good disturbed surfaces of walls, floors, etc with cement plaster, putty and paint to match with the existing surface complete all as specified and directed.
241
-
-
M&L for Point wiring with 1.5 Sqmm FRLSH insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLSH insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of electrogalvanised steel modular terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with modular frame plate with cover of any size as per site requirement for mounting switches, sockets, fan regulator etc complete all as specified and directed for the following points :-
-
-
-
One light / ceiling fan / exhaust fan / point controlled by one switch
169
-
-
One 6A socket point controlled by one switch on independent board
27
-
-
One 6A socket point controlled by one switch on same board
13
-
-
All as per item No. 106.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm FRLS copper wires.
16
-
-
All as per srl item No. 107 here-in-before but with 4 sq mm FRLSH copper wire with 4 Sqmm FRLSH copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board.
16
-
-
M&L for sub main wiring along with earth wire with FRLSH insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc including taking down existing unserviceable sub main wiring of any description complete all as specified and directed for the following sizes:- (Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length)
-
-
-
2runs x 4 sqmm(Ph & N) + 1run x 4 sqmm(earth wire)
250
-
-
2runs x 6 sqmm(Ph & N) + 1run x 6 sqmm(earth wire)
250
-
-
M&L for sub main wiring along with earth wire with FRLSH insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc complete all as specified and directed for the following sizes:- 2runs x 4 sqmm(Ph & N) + 1run x 4 sqmm(earth wire)
(Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length)
25
-
-
Notes for item No. 106 to 110 (i) Quoted rate shall deemed to include the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface.
(ii) If any beam / column / Rock wall is encountered while cutting chases, that particular portion may be provided with PVC casing & capping or surface conduit for drawing cables and surface PVC gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) No cutting shall be done on ceiling for laying PVC conduit for ceiling fan point wiring. Surface conduit or PVC casing capping may be used in that portion.
-
-
-
Supply and fix of Modular switch 1 way 6A, 1 module 240V, 50Hz complete all as specified and directed.
209
-
-
Supply and fix of Modular switch 1 way 16A, 1 module 240V, 50Hz complete all as specified and directed.
32
-
-
Supply and fix of Modular fan regulator step type in 5 steps, 240V, 50Hz complete all as specified and directed.
15
-
-
Supply and fix of Modular Socket, 6A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed.
40
-
-
Supply and fix of Modular Socket 6A/16A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed.
32
-
-
Supply and fix in Lamp holder, angle type with metal ring, PVC/Polycarbonate body including complete all as specified and directed.
4
-
-
S&F 7W White LED retrofit lamp suitable for B-22 holder base with polycarbonate diffuser and aluminium heat sink.
4
-
-
S&F of Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed.
165
-
-
Supply and fix of modular MCB protected plug and socket board in sheet steel enclosure with 25A rated mini MCB and 20A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board any description and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed.
10
-
-
Supply and fix of integrated LED batten 20 watt, 4 feet long, full white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed.
26
-
-
Supply and fix of LED street/security light fitting 35 watts with high efficiency long life LEDs with In-built electronic driver and surge protection upto 10 Kv complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including provision of GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable of size 0.5 sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and as directed.
4
-
-
Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof gypsum ceiling including connecting up with three core flexible copper complete all as specified and directed.
111
-
-
Supply and fix of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately.
2
-
-
All as per item No. 123 here-in-before but SPN, 12 way, 230 V, 1 phase, AC
Note: MCBs shall be measured and paid separately.
3
-
-
All as per item No. 123 here-in-before but SPN, 8 way, 230 V, 1 phase, AC
Note: MCBs shall be measured and paid separately.
4
-
-
Supply and fix of MCCB 100A, 16 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release complete all as specified and directed.
2
-
-
Supply and fix of MCB 40A, 10 KA, SPN, 'C' curve, 240 V, 50 Hz complete all as specified and directed.
7
-
-
Supply and fix of MCB 6 - 32A, 10 KA, single Pole, 'C' curve, 240 V, 50 Hz complete all as specified and directed.
60
-
-
M&L for earthing complete with galvanized iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level connecting to GI wire 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electrical plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- (i) The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh, protection pipe, earth wire up to 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II. (ii) Contract must ensure earthing test result less than 5 Ohm and submitted test report to Engr-in-Charge.
4
-
-
Supply , laying and fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 35 sq mm 3.5 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc including taking down existing service cable of any description complete all as specified and directed.
200
-
-
Supply, laying and fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 25 sq mm 4 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc including taking down existing service cable of any description complete all as specified and directed.
80
-
-
Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge.
210
-
-
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for laying of GI Pipe and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.
42.5
-
-
Returning, filling in, including leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-in-Charge.
36
-
-
Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.
6.5
-
-
Supply, installation, testing and commissioning of Semi automatic control panel for Oxygen gas accordance to international standerds.It should be CE and ISO certified/400 LPM with designed manifold must have two stage pressure reduction regulators, with audio visual alarming systems. The semi automatic must have heavy duty regulators with adjusting knobs- 02 Nos, electrical control gauge-2 Nos, intermediate pressure regulator-1 Nos,intermediate pressure gauge -1 No complete all as specified and directed by Engr-in-Charge.
1
-
-
Supply, installation, testing and commissioning oxygen manifold consist of 2 rows of 2 No of class D- type bulk oxygen cylinders (1 set) and two rows of 1 No of class D type bulk oxygen cylinders for emergency. The manifold should be so designed that it shall suit easy cylinder changing and positioning with NRV for changing of Oxygen gas cylinder without closing the bank complete all as specified and directed by Engr-in-Charge.
1
-
-
Supply and Fixing of Single Gas Manifold for Oxygen gas The manifold should be so designed that it shall suit easy cylinder changing and positioning with NRV for changing of Oxygen gas cylinder without closing the bank complete all as specified and directed by Engr-in-Charge.
1
-
-
Supply, installation, testing and commissioning of Bed head panel unit for providing a safe, efficient means of delivering services to patients / staff in ward applications. The Bed head panel unit should meet the following criteria:- (i) Robust designe in extruded aluminium sections. (ii) Ability to house imported medical terminal units and electrical sockets. (iii) Smooth curved surfaces,and choice of base color and fascia plates. (iv) Each Bed head panel of 3ft length should have having provision of outlet as per department, top and bottom rail and provision of nurse call system complete all as specified and directed by Engr-in-Charge.
18
-
-
Supply and Fixing of BS Type Medical Gas Outlet for Oxygen gas shall be manufactured according to EN737-1 and ENB737-6. The outlet shall be Gas specific by indexing each front service panel to a gas specific pin indexing on the respective identification rough-in-module. The outlet of positive and negative pressure, shall consist of a primary and secondary check valves. Outlet shall be manufactured with 175 mm long, type K, 9.5 MM (3/8") OD copper inlet pipe for positive pressure, Type K, 12.7 MM, (1/2") OD copper outlet pipe for negative pressure. Outlet shall be silver brazed to the outlet body. Front (latch valve) assembly shall be ENB737-6 type.
6
-
-
Supply and Fixing of BS Type Medical Gas Outlet for Vaccum shall be manufactured according to EN737-1 and ENB737-6. The outlet shall be Gas specific by indexing each font service panel to a gas specific pin indexing on the respective identification root in moduled. The outlet of positive and negative pressure, shall consist of a primary and secondary check valves. Outlet shall be manufactured with 175 mm long, type K, 9.5 MM (3/8") OD copper inlet pipe for positive pressure, Type K, 12.7 MM, (1/2") OD copper outlet pipe for negative pressure. Outlet shall be silver brazed to the outlet body. Front (latch valves) assembly shall be ENB737-6 type.
6
-
-
Supply and Fixing of Isolation Valve 12mm for Oxygen gas, valves having quarter turn handle opening, size suitable for 12mm OD coper pipe will have screwed ends and brass adopter suitable for copper pipe. Valves will be manufactured by as ISO- 9001 certified company complete all as specified and directed by Engr-in-Charge.
12
-
-
Supply and Fixing of Isolation Valve 15mm for Oxygen gas, valves having quarter turn handle opening, size suitable for 15mm OD copper pipe will have screwed ends and brass adopter suitable for coper pipe. Valves will be manufactured by as ISO- 9001 certified company complete all as specified and directed by Engr-in-Charge.
4
-
-
Supply and Fixing of Isolation Valve 22mm for Oxygen gas, valves having quarter turn handle opening, size suitable for 22mm OD coper pipe will have screwed ends and brass adopter suitable for coper pipe. Valves will be manufactured by as ISO- 9001 certified company complete all as specified and directed by Engr-in-Charge.
1
-
-
Supply and Fixing of Base Mounted Vaccum Pump with duplex 2 HP and 280 ltrs Tank vaccum pump free aired delivery to section approx 90% of P.D. maximum working pressure 29" of Hg or 730mm of Hg, single stage, with M.I. chanel frame complete with V-belt drive, belt guard etc. Electrical motor 2HP, 3 phase -01 No, 3/4" BS stainless steel valves with PTFE seat and quarter turned openable handle for pump isolation-1 No, silencer at vaccum pump discharge end -01 No, vaccum fiolter size 6" x 12" long with drain valves and housing cromplated - 01 No,inter connection coper piping of suitable sizes - 01 set and vaccum gauge - 01 No complete all as specified and directed by Eng in charge.
1
-
-
Supply and Fixing of 12mm x 0.7mm thick copper pipe for Oxygen gas, copper pipe used will be solid drawn, seamless, de- oxidized, non- arsenic, half hard, tampered and degreased, manufactured as per EN 737/BS 2871, part 1, table - X of 1971 and chemical composition as per BS-6017 of 1981, table to, Cu-DHP. The supply of pipes will be accompanied with manufacturers test certificates for the physical property of copper pipes and their chemical compositions. Pipes sizes will be used as per HTM 2022 standerds complete all as specified and directed by Engr-in-Charge.
30
-
-
All as per Item No 146 here in before but of size 15mm OD x 0.9mm thick.
40
-
-
All as per Item No 146 here in before but of size 22mm OD x 0.9mm thick.
30
-
-
Supply and Fixing of BPC Flow Meter with Humidifiers for Oxygen gas, the oxygen folwmeter with tubing nipple/ humdifier bottle should comply with HTM 02- 01 / ISO- 7396 - 01 standers. It should be CE certified. Back pressure compensated flow meter for accurate gas flow measurement with following features: Controlled within a range of 0-15 LPM should meet strict precision and durability standerd. The flowmeter body should be made of brass or nickel chrome plated material, the humdifier bottle made of unbreakable and reusable poly carbonate/ poly sulfied material auto clavable at 121" centigrade complete all as specified and directed by Engr-in-Charge. .
6
-
-
Supply and Fixing of Ward Vaccum Unit for Oxygen gas the vaccum unit will include vaccum regulator along with - 760mm of Hg vaccum gauge of 21/2" size dial, 600 ml capacity reusable plastic collection bottle with overflow safety trap with plastic slide wall mounted type complete all as specified and directed by Engr-in-Charge. .
6
-
-
Supply and Fixing of Probe for Oxygen gas Outlet shall be manufactured with 175 mm long, type K, 9.5 MM (3/8") OD copper inlet pipe for positive pressure, Type K, 12.7 MM, (1/2") OD copper outlet pipe for negative pressure. Outlet shall be silver brazed to the Probe body shall be ENB737-6 type. complete all as specified and directed by Engr-in-Charge.
6
-
-
Supply and Fixing of Probe for Vaccum Outlet shall be manufactured with 175 mm long, type K, 9.5 MM (3/8") OD copper inlet pipe for positive pressure, Type K, 12.7 MM, (1/2") OD copper outlet pipe for negative pressure. Outlet shall be silver brazed to the Probe body shall be ENB737-6 type. complete all as specified and directed by Engr-in-Charge.
6
-
-
Supply and Fixing of 6M switch socket for Oxygen gas complete all as specified and directed by Engr-in-Charge.
6
-
-
Supply and Fixing of flameproof cum waterproof LED Bulk head light fiting of 15W,IP-66 protection of cast aluminium alloy material and heat and impact resistance toughen 'A' clear glass having anticorrosive epoxy powder coated finish complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size, complete all as specified and directed by Engr-in-Charge.
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%