Military Engineer Services Tender

Total amount of Sch 'A' Part IV (Garbage bin)

Total amount of Sch 'A' Part V (Internal Electrification)

Total amount of Sch 'A' Part VI (Internal Water Supply)

Total amount of Sch 'A' Part VII (External Electric Supply)

Total amount of Sch 'A' Part VIII (External Water Supply )

Total amount of Sch 'A' Part IX (Road, Path & Culvert)

Total amount of Sch 'A' Part X (Area Drainage)

Total amount of Sch 'A' Part XI (Sewage Disposal)

Total amount of Sch 'A' Part XII (Fencing Gate)

Total amount of Sch 'A' Part XIII (Misc items for rectification of defects)

Internal ELECTRIC SUPPLY ( SCHEDULE 'A" PART V(A) Material and labour for sheet metal enclosure of size 1200mm x 1200mm x 250mm for accommodating DB's, energy meters and timer for building security light control made out of 2mm thick MS sheet with two front openable doors fixed with suitable hinges and provision for locking arrangement, pretreated using seven tank process followed by powder coat painting of approved shade, provided with suitable gasket to make it dust vermin proof and IP-43 degree of protection including making holes at bottom/top for entry of cables and circuit/submain wiring and provision of suitable stainless steel gland for incoming cable complete grouted in brick/concrete wall with suitable hole fasts made up of 25mmx25mmx5mm angle iron and filling the gaps between box & wall with PCC 1:2:4 including fixing by reveting of 02 Nos sheetal metal danger notice plates of 415 Volts rating complete all as specified and directed by Engineer-in-Charge.

Material and labour for sheet metal enclosure of size 600mm x 500mm x 250mm for accommodating DBs, energy meter and timer for building security light control made out of 2mm thick MS sheet with single front openable door fixed with suitable hinges and provision for locking arrangement, pretreated using seven tank process followed by powder coat painting of approved shade, provided with suitable gasket to make it dust/ vermin proof and IP-43 degree of protection including making holes at bottom/top for entry of circuit/submain wiring complete grouted in brick/concrete wall with suitable hole fasts made up of 25mmx25mmx5mm angle iron and filling the gaps between box & wall with PCC 1:2:4 including fixing by reveling of 01 No sheet metal danger notice plates of 230 Volts rating complete all as specified and directed by Engineer-in-Charge.

SSupply and fixing MCCB distribution board double door type (for incoming MCCB & outgoing MCBs) TPN 4 way vertical type sheet steel powder painted with bus bar, neutral link & earth bar etc. and connecting up all incoming and outgoing cables/ circuit wiring complete all as specified and directed by Engineer-in-Charge. (Note: MCCBs & MCBs shall be measured and paid separately under relevant items of Schedule 'A'.

Supply and fixing MCB, SP, 'C' series, 6 - 32 Amps, 10 KA, 230 Volts complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB, SPN, 'C' series, 32 Amps, 10 KA, 230 Volts complete all as specified and directed by Engineer-in-Charge.

Supply and fixing analog type time switch 3 module size to work on 230 Volts, 50 Hz, AC supply suitable for street light control complete all as specified and directed by Engineer-in-Charge.

Supply and fixing electronic energy meter, tamper proof, single phase, 5-30 Amps rating, accuracy class 1.0 with LCD display including connecting incoming and outgoing circuits complete all as specified and directed by Engineer-in Charge. Make: L&T Cat No. WM101BC5DL0 or its equivalent in HPL/ Secure

Supply and fixing wall/ surface mounted LED batten light fitting, 20W LED 6000K (4 ft.), with extruded aluminium heat sink, control gear, Poly Carbonate extruded diffuser & integrated electronic driver. 230 V etc. complete with all accessories internally pre-wired and including connecting up with twin ore twisted flexible copper conductor cable with suitable size from ceiling rose to connector of fitting complete all as specified and directed by Engineer-in- Charge. Make: Havens Cat No. LHEXBXPNIN1W020 or equivalent in Philips/ Wipro/ GE Lighting

Supply and fixing wall/ surface mounted LED batten light fitting, 10W LED 6000K (2 ft.), with extruded aluminium heat sink, control gear, Poly Carbonate extruded diffuser & integrated electronic driver. 230 V etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector of fitting' complete all as specified and directed by Engineer-in- Charge. Make: Havells Cat No. LHEXBXPNIN1W010 or equivalent in Philips/ Wipro/ GE Lighting

Supply and fixing LED bulb 10 Watt suitable for B22 type lamp holder complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED street/security light fitting 30 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on concrete walls with • suitable MS clamps(02Nos) made up of 40mmx5mm MS flat, nuts, bolts and washers ad provision of 3 core, 1.5 sqmm copper cable from ceiling rose to connector of fitting complete all as specified and as directed. Make: Havells Cat No. LHEWEBP7PL6S030 or equivalent in Philips/Wipro/ GE Lighting

Supply and fixing ceiling fan 1200mm sweep, 5 star rated and ISI marked, three blades (Ivory Colour) with down rod and canopies but without regulator suitable for working on 230 volts, 50 Hz single phase supply including provision of 3 core twisted copper conductor cable of suitable gauge from ceiling rose to connector of ceiling fan complete all as specified and directed by Engineer-in-Charge. Make: Havells Model No. SS-390 or its equivalent in Crompton/ Usha/ Almonard

Supply and fixing heavy duty exhaust fan 300mm sweep, 900 RPM with metallic frame, metallic blades and metallic louvers suitable for working on 230 volts, 50 Hz single phase supply including provision of 3 core twisted copper conductor cable of suitable gauge from ceiling rose to connector of exhaust fan complete all as specified and directed by Engineer-in-Charge. Make: Havells/ Crompton/ Usha/ Ahnonard

Supply and fixing exhaust/ventilating fan 200mm sweep with non-metallic body suitable for working on 230 volts, 50 Hz single phase supply including provision of 3 core twisted copper conductor cable of suitable gauge from ceiling rose to connector of exhaust fan complete all as specified and directed by Engineer-in-Charge. Make: Havells/ Crompton/ Usha/ Almonard

INTERNAL WATER SUPPLY (SCHEDULE 'A' PART VI (A) Supply and fixing Health Faucet with Bib tap cotnbinatioi1, cast copper alloy with crutch or butterfly handle, screwed down, screwed for pipe or for brass ferrule of size 15mm bore dia complete all as specified and directed.

EXTERNAL ELECTRIC SUPPLY (SCHEDULE 'A' PART VII (A) Supply and fixing MCCB, 200 Amps, 4 Pole, 36 KA, 415 V, 5 Hz with MS sheet enclosure with inbuilt neutral link for TPN system fixed on existing panel with suitable fixing arrangement complete all as specified and directed by Engineer-in-Charge.

Supply, installation, testing and commissioning of outdoor type CPRI approved, cubicle panel board suitable for 3 phase 4 wire 50 Hz supply system factory fabricated made out of CRCA sheet of 3mm thick for outer shell and 2mm thick for inner shell with front and rear openable double leaf doors with locking arrangement complete with powder coat painting and suitable packing material for IP-5 degree of protection and confirming to IS:8623-1993 and including 50mmx50mmx6mm angle iron base frame of suitable size for mounting the panel board at a height of 450mm from GL and grouted on PCC foundation. The size of panel board shall be suitable for accommodating and including provision of following switchgears complete:- (a) Aluminium bus bar of 300 Amps rating for 3 phase and neutral with heat shrinkable coloured PVC sleeve insulation mounted on suitable insulators - 01 Set (b) MCCB, 200 Amps, 4 Pole, 36 KA - 01 No. (incoming) (c) MCCB, 63 Amps, 3 Pole, 25 KA - 06 Nos (d) MCB, SPN, 32 Amps, 'C' curve, 10 KA- 02 Nos. (e) Digital Voltmeter 0-500 Volts with selector switch - 01 No (f) Digital Ammeter 0-200 A with selector switch and CTs-1 sets (g) LED type pilot indicator lamps for R,Y,B phases - 01 Set of 3

M&L for shifting of LT pole 9 mtr long by taking down existing cross arms and ACSR conductor, insulators etc and re-fixing the same at other location complete all as specified and directed by Engineer-in-Charge. NOTE: Demolition of concrete, excavation & PCC for foundation and coping shall be measured and paid separately under relevant items

Supply and fixing LED street light fitting 45 watts builtin with electronic driver and LEDs housed in pressure die cast aluminium housing with toughened glass and silicon gasket for IP66 degree of protection including GI pipe bracket made up of 40mm dia medium grade GI pipe of. length 1.50m bent to required shape and fixing on steel tubular round poles with suitable MS clamps(02Nos) made up of 40mmx5mm MS flat, nuts, bolts and washers complete all as specified and as directed by Engineer-in- Charge. Make: Wipro Cat No. LR02-501-XXX-57-XX or equivalent in Philips/ GE Lighting

Supply and fixing SMC (Sheet Moulded Compound) outdoor type junction box of Sintex Model : GSJB 3020 (Outside Dimensions) with 20Amps rated two pole connector, one single pole MCB of 6 Amps rating mounted on DIN rail, stainless steel cable glands suitable for 10 sqmm, 2 core cable for incoming and outgoing cables including fixing on steel tubular round poles with 25mmx4mm MS clamps (02 Nos), nuts & bolts complete all as specified and as directed by Engineer-in-Charge.

EXTERNAL WATER SUPPLY (SCHEDULE 'A' PART VIII (A) Cutting existing 80mm dia bore steel tubing in position and screwing both ends for provision and insertion of 80mm x 80mm x 80mm dia bore GI Tee alongwith necessary GI unions and nipples as per site requirement complete all as specified and directed by Engineer-in-Charge.

Construction of valve chamber of size internal dimensions 900mm x 900mmx900mm built in 200mm thick walls with precast cement concrete solid blocks set in CM 1:4, rendering 10mm thick cem1ent plaster on fair faces of brick work finished even and smooth (with out using extra cement) and providing 3m thick MS plate hinged cover fixed to 50mmx50mmx6mrh thick angle iron frame work on chamber with locking arrarigement including necessary earth work, excavation, PCC bedding &coping, applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and two coats of white wash on concrete wall sui1aces complete all as specified and directed.

Construction of valve chamber of size internal dimensions 600mm x 600mmx700mm built in 200mm thick walls with precast cement concrete solid blocks set in CM 1:4, rendering 10mm thick cem1ent plaster on fair faces of brick work finished even and smooth (with out using extra cement) and providing 3m thick MS plate hinged cover fixed to 50mmx50mmx6mrh thick angle iron frame work on chamber with locking arrarigement including necessary earth work, excavation, PCC bedding &coping, applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and two coats of white wash on concrete wall sui1aces complete all as specified and directed.

Supply, install, testing and commissioning of chlorine dosing system consisting of high pressure single head gear motored adjustable dosing pump with accessories including lead tubing, connecting nuts, injection check valve, clay weight, ferrules etc alongwith 100 liter FRP tank with FRP lid & level gauge alongwith agitator with shaft and blade in plastic, mounted on tank complete all as per manual of water supply Govt. of India Chapter-8 and complete all as specified and directed

Supply only high strength chlorination chemical calcium based granular disinfectant for water treatment in 45 kg \plastic container complete all as per manual of water supply Govt. of India Chapter-8 complete all as specified and directed.