Military Engineer Services Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date18 Feb 2025
Closing Soon11 Mar 2025
Tender Amount₹ 46,85,300
Costs
EMD
₹ 93,706Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_698377_1Tender No
GE/E/LKO/T-60 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering and also including taking down of existing wind tie where if required complete all as specified and as directed.
210
-
-
... More
M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
330
-
-
... More
M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
40
-
-
... More
Dismantling textile covering incl frames (if any) and cover fillets (measured flat and not girthed) complete all as specified and as directed.
160
-
-
... More
S&F 605 x 605 mm GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling sectin (Not exc 1.2m length) of 0.55 mm thick ness having kurled web of 50mm and flanges of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 6mm dia gI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified and as directed.
160
-
-
... More
S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed.
160
-
-
... More
M&L for 4 mm thick asbestos fibre cement building boards (E- Board) fixed or laid/inserted to timber/GI/Aluminium frame work with screws complete all as specified and directed.
160
-
-
... More
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.
739
-
-
... More
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finishing even and smooth without using extra cement complete all as specified and as directed.
300
-
-
... More
Ditto all as per item 12 above but 15 mm thick on other than fare faces of brick work in CM 1:6 complete all as specified and as directed.
434
-
-
... More
M&L for preparing new surfaces of walls and applying two coat of Oil bound distemper on new surface complete all as specified and as directed.
384
-
-
... More
Ditto- as per item No 14 above but two coat of cement base paint on wall over a coat of primer complete all as specified and directed by Engr-in-Charge.
250
-
-
... More
Dismantling of timber scantling 40 sqcm and over in section, in any position such as in rafter, purlins etc in unframed work complete all as specified and as directed.
1
-
-
... More
S&F second class hard wood (sal) in timber scantling clean sawn as in unframed work complete all as specified and as directed.
1
-
-
... More
M&L for preparing surface of wood and wood based material, new or old of any description and girth not otherwise described and treated with two coat of creosote oil complete all as specified and as directed.
2
-
-
... More
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n.exc 4 Sqm each including iron mongary complete all as specified and directed.
21
-
-
... More
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each including iron mongary complete all as specified and directed.
11
-
-
... More
S&F 2nd class hard wood plain, soild chowkhats and frames wrought,framed rebated on the solid rounded or chamfered put together with glue pined at joints at site complete all as specified and as directed.
0.3
-
-
... More
S&F 30 mm thick flush shutters, solid core constructed with block board core and plywood face panels commercial type on both side complete all as specified and as directed.
5
-
-
... More
S&F 30 mm thick 2nd class hard wood locally fabricated glazed and skelton window or ventilator shutter open rebated and prepared to receive glass etc divited into square with plain chamfered or rounded, mitred beads for securing glass/gauge complete all as specified and as directed. in SSR Part-I 1991 section 8 clause 8.20 (b) complete all as specified and as directed.
5
-
-
... More
S&F mild steel work as in framed work as in grill with ends of bars shouldered and riveted or fixed in spike framed guard bars confirming to Fe-410-0 or Fe 310-0 complete all as specified and as directed.
30
-
-
... More
S&F 100 mm long. mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed
8
-
-
... More
Ditto as per item no 25 but 200 mm long complete all as specified and as directed.
6
-
-
... More
S&F 150mm size mild steel pressed handles, oval type ISI marked stove enamelled black complete all as complete all as specified and as directed.
6
-
-
... More
Ditto as per item no 27 but 100 mm size .complete all as specified and as directed.
8
-
-
... More
S&F 100 mm size butt hinges, ISI market medium weilght cold rolled mild steel and fixed complete all as specified and as directed
9
-
-
... More
Ditto- as per item no 29 but 75 mm size.complete all as specified and as directed.
12
-
-
... More
S&F sheet glass 3 mm thick ordianary quality and galzing with wooden beads or oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and as direcetd at site.
4
-
-
... More
S&F mild steel work as in hold fast made out of flat iron 25mm x 5 mm including necessary welding or fixing with nut and bolts complete all as specified and as directed
20
-
-
... More
M&L for preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
20
-
-
... More
M&L for preparing new steel surfaces over 10 cm width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
5
-
-
... More
S&F Anodised aluminium frame work for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.
10
-
-
... More
S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beading screws etc. complete all as specified and as directed.
1.75
-
-
... More
S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips rubber packing anodized aluminium snap beading screws, anodized aluminium fittings such as peg stays 150 mm long (1 No.) hinges type B-21 100 mm long (2 No) suitable handle (1 No) complete all as specified and as directed.
3.1
-
-
... More
M&L for 4.8 mm thick sheet glass, ordinary quality in squares exc. 0.5 Sqm in each pane.complete all as specified and as directed.
4
-
-
... More
S&F Aluminium die cast body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed.complete all as specified and as directed.
1
-
-
... More
M&L for brick work built in cement and sand mortar 1:6 with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified and as directed.
10
-
-
... More
S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and as directed.
3
-
-
... More
Demolition of cement concrete (below or above ground level) n exc 15 cm thickness complete all as specified and as directed.
2
-
-
... More
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of oil emulison distemper (OBD), complete all as specified and as directed.
100
-
-
... More
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of cement base paint, complete all as specified and as directed.
100
-
-
... More
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of one coat of white wash on ceiling, complete all as specified and as directed.
100
-
-
... More
M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and as directed.
200
-
-
... More
M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area.complete all as specified and as directed.
40
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for.complete all as specified and as directed.
3
-
-
... More
S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.complete all as specified and as directed.
300
-
-
... More
Excavating in post holes soft/loose soil (or similr holes) not exc0.5 Cum getting out returning filling in and reamming earth or broken rubble mixed with earth around, in lyers not exceeding 25 Cum watering and removing surplus soil to a distance no exc 50m and making good surfaces complete all as specified and as directed.
16
-
-
... More
Surface dressing n exc 15 cm deep in soft/loose soil.complete all as specified and as directed.
300
-
-
... More
M&L for 75mm thick cement concrete type C2, 1:3:6 (40mm graded stone aggregate) as in sub-floors, sub-bases and plinth protection , etc.;complete all as specified and as directed.
225
-
-
... More
M&L for providing and laying 60 mm thick factory made chamfered edge cement concrete paver blcok of M-35 grade with approved colour, design & pattern as in footpath, parks.lawn, drive ways or light traffic parking etc of required strength, thickness & size/shape, made by table vibratory method using PU moud , laid in required colour & pattern over and including 25 mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engr-in- Charge.
150
-
-
... More
M&L for rendering 10mm thick in CM 1:3 fair surface of ceiling finished surface even and smooth without using extra cement complete all as specified and directed.
5
-
-
... More
M&L for preparation of newly plastered surfaces and applying two coat of oil emulsion distemper (OBD) over 2 mm wall care putty on wall, approved shade/tint complete all as specified and directed.
50
-
-
... More
M&L for preparation of new surface of wall and applying two coats of cement based paint white or tinted complete all as specified and directed.
50
-
-
... More
M&L for Prepration new plastered surfaces and applying two coat of white wash on ceiling complete all as specified and directed.
5
-
-
... More
Removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removing the same to the places complete all as specified and directed.
180
-
-
... More
Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for in this Schedule complete all as specified and directed.
8
-
-
... More
M&L for cement concrete type B-1, 1:2:4 (20mm graded aggregate) on roof slab complete all as specified and directed.
8
-
-
... More
M&L for rendering 10mm thick on fair faces of concrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound finished even and smooth without using extra cement . (Liquid water proofing compound to be measured paid separately) complete all as specified and directed.
180
-
-
... More
Supply only Liquid water proofing compound complete all as spesified and directed.
5
-
-
... More
M&L for Waterproof coating providing and applying waterproofing treatment to sound, moisture free concrete surface using Nitoproof 600PF manufactured by Fosroc Chemicals India Pvt Ltd. Nitoproof 600PF shall be liquid applied single component pitch free polyurethane coating capable of bridging substrate cracks up to 2 mm. It shall be applied in two coats at coverage rate of 2kg/sqm. The membrane formed shall confirm to following minimum properties: 1) Elongation : 400% as per ASTM D412 2) Tensile Strength : 2.5 N/mm2 as per ASTM D 412 3) Adhesion in-peel test : 50 N as per ASTM C- 836 4) Recovery from 350% elongation : 95% as per ASTM D 412 5) Water Vapour Transmission 2.3mm film: 0.6 g/m2/hr 6) Initial Hardness Shore A : min 60 as per ASTM D 2240 7) Root resistant : protection screed required No geotextile recommended in between layers as it decreases elongation property of material Membrane Termination shall be done 300 mm above floor level. System includes supply, Surface preparation (crack treatment, coving etc), application and termination of coating all complete as per the fosroc methodology.
180
-
-
... More
Demolition of reinforced cement concrete as in self etc (reinforcement cut as reqiured to faciliate demolition) complete all as specified and directed.
1
-
-
... More
Providing of earth filling with approved earth,spreading, leveling & compecting n exc. 30 cm thick Layer, watering, ramming/rolling and finishing to required size, shape,etc.n exc. 1.5m high from base inc bringing of approve earth.complete all as specified and directed.
45
-
-
... More
M&L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.
22.5
-
-
... More
M&L for 100 mm thick PCC type D-2 1:4:8 (40mm graded stone aggregate) for sub base.complete all as specified and directed.
150
-
-
... More
S&F exterior tiles (heavy duty) of superior quility 400x400x10-12MM thick of approved size/design/shade set and jointed in neat cement slurry & pointed in white or coloured cement to match as in floor over and including 20mm thick screed bed in cm 1:4 complete all as specified and directed.
150
-
-
... More
Dismantling of stone slabs and tiles of any description or thickness in floors, platform, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
3
-
-
... More
M&L for 20 mm thick granite (of any type and colour ) work (table rubbed and polished ) in steps, Jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite complete all as specified and directed.
30
-
-
... More
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
50
-
-
... More
S&F vitrified ceramic tiles dark/light shade digital tiles/(double charged), 10mm thick (square/ rectanglar) polished , exceeding 0.18 sqm of each tiles not exceeding 0.38 sqm, in floors etc. laid over 15mm thick screed bed 1:6 , set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed.
130
-
-
... More
M&L Glazed ceramic tiles (coloured) in vertical surfaces 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.
30
-
-
... More
M&L for machine cut kota stone slab flooring 19-20mm thick over cement screed bed 15mm thick in CM 1:6, base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
50
-
-
... More
M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
10
-
-
... More
S&F exterior tiles (heavy duty) of superior quility 400x400x10-12MM thick of approved size/design/shade set and jointed in neat cement slurry & pointed in white or coloured cement to match as in floor over and including 20mm thick screed bed in cm 1:4 complete all as specified and directed.
124
-
-
... More
S&F for false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) False ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2% , humidity S&F for fully perfortated 12mm thick micro tegularedged or 10mm thick squre edged GRG(Glass Fibre Reinforced Gypsum) false ceilijng tiles at all heights with GRC false ceiling tiles of size 595x595 mm of approved texture design and patterns having moisture content less than 2%, humidity resistance of 99% NRC 0.50 to 0.75 as per IS 8225:1987. Noncmbustible as per BS476(para4 )-1970 and light reflectance of 85% ( minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15x32mm of length 1200 mm and 3000 mm, cross-T of size 15x 32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to from grid module of size 600x600mm, suspended from ceiling using galvanizedmild steel items (galvanized @ 80 grams per sqm) i.e 50mm long 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level aduster of length and L- shape leveladjuster of size 85x25x2 mm Galvanised iron perimeter wall angle of size 24x24x0.40 of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center and 40mm long dry wall wood screw. The work shall be carried out as per direction of the Engineer-in-Charge complete all as specified and directed.
100
-
-
... More
S&F 85x45mm single rebated factory made 100% solid WPC prelem both side (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum complete all as specified and directed.
10
-
-
... More
S&F 65x100 mm single rebated factory made 100% solid WPC prelem both side (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum complete all as specified and directed.
25
-
-
... More
S&F Factory made 30 mm thick 100% solid WPC (Wood Polymer Composite) solid both side 14 micron Flush door shutter wit 10mm deep CNC moulding design of required size comprising of virgin PVC resin of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
16
-
-
... More
Providing & fixing of vajra series windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy-duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self-expanding, screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes. (Make: Elixir Met Form Pvt Ltd or equivalent or as approved by concerned GE
16
-
-
... More
S&F powder coated aluminium anodised frame/chowkat of Alu door fixed with rawal plug and screw or wire expansion hold fasteners complete all as specified and directed.
15
-
-
... More
Providing and fixing powder coated aluminium partly glazesd and partly paneled sliding door shutter using 1.50mm thick standered door section having size of styles, top rails 83x44mm where as bottom rails will be made up of 100x44mm Make: Jindal/Hindalico including necessary joining cleats glazing clips, rubber packing, anodized aluminium snap beading screws, anodized aluminium fittings such as 100mm long 3 No. aluminium hinges B-21 ,type 01 No. aluminium tower bolt 200mm long and one no mortise lock 100mm size 4 levers (vertical type) and 01 No 300mm size long aluminium sliding bolt and 02 No fancey type fiber glass 150mm dia circular handle shall be provided to each door and glazing of top panel shall be made of 5.50 thick sheet glass and pannelling shall be provided with 6 mm thick HPL board with both side choice laminations, complete all as specified and directed.
5
-
-
... More
S&F 250 mm long aluminium alloy sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts complete all as specified and directed.
6
-
-
... More
S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.complete all as specified and directed.
12
-
-
... More
S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.complete all as specified and directed.
4
-
-
... More
S&F 125 mm size aluminium alloy handles fabricated type extruded section ,ISI marked complete all as specified and directed.
4
-
-
... More
S&F 150 mm size aluminium alloy handles fabricated type extruded section ,ISI marked complete all as specified and directed.
12
-
-
... More
S&F Butt hinges 125 mm stainless steel hinges medium weight and fixed complete all as specified and directed.
18
-
-
... More
S&F Butt hinges 100 mm extruded aluminium alloy with galvanised mild steel hinges pin anodised type B-21 and fixed to PVC frame complete all as specified and directed.
6
-
-
... More
S&F for in repair capacity 1000 ltrs three layer rotational moulded polyethylene water storage tank cylindrical hoisted & fixed in position incl dismantiling water tank complete all as specified and directed.
1
-
-
... More
S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density Plastic ball Screwed for iron pipe and fixed (Minimum weight -210 gms. complete all as specified and directed.
1
-
-
... More
S&F 15 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down old pipe complete all as specified and directed.
50
-
-
... More
S&F 20 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down old pipe complete all as specified and directed.
20
-
-
... More
S&F in repair Vitreous china squatting pan Orissa pattern size 580x440 mm white with P or S trap front or back inlet with integral foot rests (excluding flushing cistern and flush pipe ) complete all as specified & directed.
2
-
-
... More
S&F 10 Litres capacity PVC valveless syphonic action type flushing cistern low level, white with inlet ball valve float and handle including brackets connection to pipes and fixing of lever if any joint between flushing pipe and socket of WC pan pre-made complete all as specified and directed.
2
-
-
... More
S&F Vitreous china wash hand basin white angle back size 550x400 mm including 32 mm dia CP waste coupling long screwed shank fly nut flanged end and embedded in lead to waste pipe excluding piller taps complete fixed specified and directed by enginner -in-charge fixed as in repair
1
-
-
... More
S&F Vitreous china urinal, Half stall type white(excluding flushing cistern flush pipe and washte pipe) compete including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60cm long brass screws pointing around urinal back in cement fixiing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe including connections to flushing pipe and outgoing pipes fixed in repair.complete all as specified and directed.
1
-
-
... More
S&F 110mm PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.
2
-
-
... More
S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or wall including down complete all as specified and directed.
10
-
-
... More
S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or in floor/wall complete all as specified and directed. by Engineer-in-charge.
3
-
-
... More
S&F 110mm bore PVC (SWR) bends, any radius.complete all as specified and directed.
4
-
-
... More
S&F PVC (SWR) bends any radius of 75 mm dia complete all as specified and directed.
3
-
-
... More
S&F PVC (SWR) 75mm floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
2
-
-
... More
S&F 15mm dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, scresed down screwed for iron pipe or for brass ferrule and fixed both ends for iron pipe or for unions complete all as specified and directed.
5
-
-
... More
S&F in repair 15 mm dia Pillar tap cast copper alloy chromium plated fancy type with capstan head and cup screwed down screwed for G I pipe or for brass ferrule complete all as specified and directed.
1
-
-
... More
S&F 15mm dia fancy type chromium plated angle valve/cast copper ally screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed to GI Pipe.complete all as specified and directed.
2
-
-
... More
S&F CP brass towel rails 20 mm dia and 600 mm long fixed as in repair incl chromium plated brass screw and wooden / cleats complete all as specified and directed.
1
-
-
... More
S&F in repairs bevelled edge mirror of selected quality 5mm thick glass mounted on fixed to stainless steel fastener 50mm long spacer/wooden plugs with chromium platated brass screw and cup washers complete all as specified and directed.
1
-
-
... More
S&F PVC connection of 15 mm bore 600 mm long with brass coupling on both ends of superior quality all as specified.PTMT nuts fixed as in repair.complete all as specified and directed.
5
-
-
... More
S&F in repairs 32 mm dia Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms) complete all as specified and directed.
1
-
-
... More
S&F in repairs 32mm dia PVC waste pipe approx 900mm long for sink/WHB complete all as specified and directed.
2
-
-
... More
M&L for cement concrete type D2 1:3:6 (40mm graded aggregate) in foundation, filling and mass concrete.complete all as specified and directed.
1
-
-
... More
S&F M.S framed work such as post, purline truss etc with ends of bars sholdered and /or riveted into spikes framed guard bars/railing complete all as specified and directed.
250
-
-
... More
S&F for mild steel as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of FE410-W (Gde E-250) complete all as specified and directed.
900
-
-
... More
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete complete all as specified and directed.
5
-
-
... More
Excavation in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil.complete all as specified and directed.
15
-
-
... More
M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation complete all as specified and directed.
5
-
-
... More
M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius built in cm 1:4 complete all as specified and directed.
10
-
-
... More
M&L for PCC type B0 1:2:4 (using 12.5mm graded aggregate) as in coping complete all as specified and directed.
1
-
-
... More
M&L for cement concrete type B1 1:2:4 (20mm graded aggregate ) as in surface channels and drains complete all as specified and directed
2
-
-
... More
Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete using extra cement including necessary forms mould mitred /stopped ends etc complete all as specified and directed.
40
-
-
... More
Removal of excavated material n.exc 50 m and depositing where dircted at a level not exc 1.5 mtr above the strating point , complete all as specified and directed.
12
-
-
... More
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of oil emulison distemper (OBD), complete, all as specified & as directed.
400
-
-
... More
Complete removal of existing treatment by scrapping with Trucare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour. NOTE: Work Executed by OEM under the Provision of MOU
250
-
-
... More
M&L waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1mm, over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and . Sanding of the putty surface with TruCare Wall Sander: L- 01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM not less than 1500, sannding pad of 240 Grit or above having dia of 7"/9" to make the surface free from dust etc. by skilled labour.
Step 1) Mix the putty powder by adding 40-50% water and mix it with Trucare Putty mixer(Trucare Putty mixier with min 1400 W power havinng mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute).
Step 2)Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Trucare Graco Spray Machine(Model: EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041" Step (3) Allow 6-8 hrs time to dry the putty surface. NOTE: Work Executed by OEM under the Provision of MOU
250
-
-
... More
M&L for one coat of acrylic water based exterior grade primer @0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application Trucare Graco or equivalent having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent quotes as per manufacturer instructions complete all as specified and directed. NOTE: Work Executed by OEM under the Provision of MOU
250
-
-
... More
M&L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up Resistance with low VOC less than 50 G/L , Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine of paint application of Trucare Graco or equivalant having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint with 8 years performance warranty from Manufacture and instructions complete all as specified and directed.. NOTE: Work Executed by OEM under the Provision of MOU
250
-
-
... More
Taking down carefully copper/aluminium point wiring ( light, fan, socket , bell or power) complete including all electrical fittings & fixtures(DBs,submain,cables etc) all as specified and directed by Engineer-in-charge.
213
-
-
... More
Taking down carefully Ceiling fan/wall fan/Exhaust fan and diposited in AGE EM yard as directed by Engineer-in-charge without any extra cost in safe custudy for BER or otherwise complete all as specified and as directed.
61
-
-
... More
Taking down carefully any Light fittings/fixtures any size complete including all (electrical fittings & fixtures etc) complete all as specified and as directed. by Engineer-in-charge.
52
-
-
... More
Material and Labour for point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multi stranded copper conductor single core cable 1100 volts grade in and including PVC conduit with accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP complete all as specified and directed.
Note :- Sunken box/cover plate for modular switches, sockets etc will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate.and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall complete all as specified and as directed.
145
-
-
... More
All as per Item No 132 hereinbefore but for One 5 A socket outlet on independent Board complete all as specified and as directed.
35
-
-
... More
All as per Item No 132 hereinbefore but for One 5 A socket outlet on same Board complete all as specified and as directed.
13
-
-
... More
All as per Item No 132 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor complete all as specified and as directed.
20
-
-
... More
Supply and fix frame plate with match covert three module complete all as specified and as directed.
45
-
-
... More
All as per item No.136 above but six module complete all as specified and as directed.
23
-
-
... More
All as per item No.136 above but eight module complete all as specified and as directed.
15
-
-
... More
All as per item No.136 above but twelve module complete all as specified and as directed.
19
-
-
... More
Supply and fix terminal box suitable for three modular plat of size 100X75x50 mm including cutting, grooving and plastering etc. complete all as specified and as directed.
45
-
-
... More
All as item No 140 above but four modular plat of size 128X75x50 mm including cutting, grooving and plastering etc. complete all as specified and as directed.
4
-
-
... More
All as item No 140 above but six modular plate of size 210X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.
23
-
-
... More
All as item No 140 above but eight modular plate of including cutting, grooving and plastering etc. complete all as specified and as directed.
13
-
-
... More
All as item No 140 above but twelve modular plate of including cutting, grooving and plastering etc. complete all as specified and as directed.
20
-
-
... More
Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one module complete all as specified and as directed.
193
-
-
... More
Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module complete all as specified and as directed.
20
-
-
... More
Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module complete all as specified and as directed.
48
-
-
... More
Supply and fix Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module complete all as specified and as directed.
20
-
-
... More
Supply and fix Modular Regulator 230V AC 50 HZ SP two module all as specified. complete all as specified and as directed.
10
-
-
... More
S & F in replacement factory made distribution board SP & N 8 way double door fabricated of CRCA sheet with metal door (IP-43 protection) bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as a incomer and 6 SP MCBs as outgoing complete all as specified and directed conforming to IS: 8623 along end box for above DB complete all as specified & directed.
4
-
-
... More
Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 160 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SPN, AC, 240 volt of 40 Amp, "C" curve, 10 KA breaking capacity - 16 Nos.
1
-
-
... More
Supply and fix in replacement factory made distribution board 4 way TPN DB Double door with metal double door (IP-43 protection) fabricated of CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps bus bar, Neutral bar, Standard din rail,earth bar and cable ties for cable management, top and bottom removable gland plates with provn for MCB TPN and 12 SP MCBs outgoing complete all as specified and conforming to IS :8623 along with cable end box for above DB complete all as specified & directed.
1
-
-
... More
Supply and fix in repair MCB SP 230V, 6-32 Amps capacity complete all as specified and as directed.
108
-
-
... More
Supply and fix in repair MCB SPN 230V, 32 to 63 Amp capacity complete all as specified and as directed.
14
-
-
... More
Supply and fix in repair MCB TPN 415V, 63 to 100 Amp capacity complete all as specified and as directed.
2
-
-
... More
S&F Ceiling rose PVC polycarbonate complete all as specified and as directed.
90
-
-
... More
Supply and fixing of wall/surface mounted integrated batten LED light luminaire of 4ft length with a system wattage of 20-22W with a nominal system lumen output of 2000-2200 lumens and a minimum system efficacy of 100Lm/W. CCT shall be 6500K and CRI ≥ 80. Housing shall be extruded aluminimum with powder coating & with IP20 protection, The luminaire shall meet IP20 rating with surge protection of 2.5KVA, THD ≤10% and PF ≥ 0.95, complete all as specified and as directed.
20
-
-
... More
Supply and fixing recess mounting LED light fitting 2'x2' luminaire architectural recessed luminaire with CRCA housing and Molded PC diffuser with an unique angular optics for making the illumination easy on eyes for light comfort in office areas with UGR=19. The luminaire should have a color consistency SDCM 5, CRI 80 and choice of CCT: 5700K. Luminaire shall be designed to emit at least 3000 lumens and an efficacy of atleast 120Lm/W and maximum system wattage of 36 Watt, designed for ambient temp 45 deg C. The metallic electronic driver shall have a power factor 0.95, THD 10%, 4KV internal surge protection and the Ripple factor should be 5% to minimise the Flicker and Stroboscopic effect and Fixture should have an operating voltage range of 140-270VAC complete all as specified and as directed. by engineer in charge.
32
-
-
... More
Supply and fix in replacement LED gate light of 40/45W LED Postop luminaire with aluminium pressure die-cast mounting spigot & polyester powder coating in addition to a specific weathering resistance treatment, color RAL7011. Non-yellowing transparent Polycarbonate UV-protected round symmetrical diffuser with circular radial pattern for glare-free and even light distribution. High Efficiency long life LED module with efficacy of 100Lm/W, CCT 4000K, and CRI 70. Powered by built-in electronic driver with THD 10%, 4kV inbuilt surge protection, high cut-off at 325V & auto-restart, including 8hrs. protection from 440V (P2P). Suitable for pole mounting having OD of 60 mm and height of 6 meters. Fixture lumen efficacy 4500 Lm, IP66 (no glue), IK05, PF0.95, Operating voltage range: 140- 277V, complete all as specified and as directed. by engineer in charge.
6
-
-
... More
Supply and fixing in replacement of Solar integral AIO streetlight with Aluminium housing, reliable & robust construction with IP65 & IK08 protection. The luminare Lithium /LifePo4 Battery capacity min 20Ah@3.2V or 20w4.5v pv panel power CRI =70, System Efficacy 165lm/W, & Minimum Lumen 4000 system wattage should not be more than 25W ± 2%, if wattages increases then the size of battery & panel shall also be increased in similar percentage to maintain equal autonomy of the system. Weight not more than 2.32 kg . The fixture should have in microwave motion sensor &sensor dealy time 18 seconds Life class of LED 50000hrs@ .complete all as specified and directed by the Engr-in-Charge.
5
-
-
... More
Supply and fix in replacement 45W Pressure die cast aluminium housing street light with system lumen of 6300 lm and system efficacy of 140 lm/w, IP-66,IK-10 single piece die cast incl spigot, dia 48-76mm,LED lifetime (L70B50) 75k Hrs with integrated optical cover. Street light should have standalone lighting control system with AUTO ON/OFF based on DUSK/DAWN timings,preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, incleds dimming profile for energy savings,drift not exceedind max 2mins/year, clock retention upto five yeras, auto switching off secondary power for module,dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminiarie incl driver and astro module,surge protection as perIEC 61000-4-5 complete all as specified and as directed. by engineer in charge.
5
-
-
... More
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm X 3.5 core complete all as specified and as directed. by the Engr-in-Charge.
230
-
-
... More
Excavation in trenches not exc 1.5 m wide and not exc 1.5m deep for laying of pipe, cable etc and getting out in soft/loose complete all as specified and directed.
50
-
-
... More
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and directed.
35
-
-
... More
Removing surplus excavated material to a distance not exc 50 meter and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.
23
-
-
... More
M&L for sand cushioning for protection of cables complete all as specified and directed.
16
-
-
... More
Supplying & laying common bricks sub class B for LT cable for protection of cable complete all as specified and directed.
2.9
-
-
... More
Supply and fixing 400 mm sweep Wall fan, 230 V with all fixing accessories complete all as specified and as directed.
18
-
-
... More
Supply and fixing 40 Amps 3 pole ASTRONOMICAL time switch Digital Timelite distribution board Aesthetically appealing with locking facility IP54 degree of protection Switch On-Off street lights on time scheduling basis by incorporating ananalog/digital time switch and contactor Rating of contactor depends on the luminaires and wattage of lighting loads Range includes from 16A to 110A with analog/digital time switch complete all as specified and as directed. by Eng-in-Charge.
1
-
-
... More
Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through & including PVC Conduit pipe 20 mm dia with all fittings including taking down old sub main wiring complete all as specified and as directed.
470
-
-
... More
Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings including taking down old submain wiring complete all as specified and as directed.
390
-
-
... More
Supply and fixing of Exhaust fan heavy duty 450 mm sweep AC single phase, 230/240 volts 50 Hz with louvers and making connection from ceiling rose with twisted copper flexible wire 23/0.076 mm complete all as specified and as directed.
Note:- Making of hole incl cutting and matching with the existing wall is incl in the item rate.
6
-
-
... More
Taking down carefully Submain wiring any size complete including all electrical fittings & fixtures etc all as specified and directed by Engineer-in-charge.
430
-
-
... More
Supply and fix TV Socket 1 Module Modular all as specified and directed by Eng-in-Charge
2
-
-
... More
Supply and fixing of wall/surface mounted integrated batten LED light luminaire of 4ft length with a system wattage of 20-22W with a nominal system lumen output of 2000-2200 lumens and a minimum system efficacy of 100Lm/W. CCT shall be 6500K and CRI ≥ 80. Housing shall be extruded aluminimum with powder coating & with IP20 protection, The luminaire shall meet IP20 rating with surge protection of 2.5KVA, THD ≤10% and PF ≥ 0.95,
12
-
-
... More
Supply and fixing recess/surface mounting LED light fitting of 20/25 watt white powder coated CRCA housing with LEDs.,efficacy 100 lumen/watt,CRI80 and pf0.9,surge protection 2.5 KV, Seamless front frame with flat white high transmission acrylic cover complete all as specified and directed. by engineer in charge.
23
-
-
... More
Supply and fix 45W Pressure die cast aluminium housing street light with system lumen of 6300 lm and system efficacy of 140 lm/w, IP-66,IK-10 single piece die cast incl spigot, dia 48-76mm,LED lifetime (L70B50) 75k Hrs with integrated optical cover. Street light should have standalone lighting control system with AUTO ON/OFF based on DUSK/DAWN timings,preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, incleds dimming profile for energy savings,drift not exceedind max 2mins/year, clock retention upto five yeras, auto switching off secondary power for module,dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminiarie incl driver and astro module,surge protection as perIEC 61000-4-5 incl MS Clamps and bracket of 40mm dia and farsnut for fixing the light all as specified and directed by engineer in charge.
12
-
-
... More
Supply and fix in repair of MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.
4
-
-
... More
Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SPN, AC, 240 volt of 40 Amp, "C" curve, 10 KA breaking capacity - 08 Nos.
1
-
-
... More
Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20amps SPN MCB complete all as specified and directed.
5
-
-
... More
Supply and fixing storage water heater (Geyser) of capacity 50 ltrs, 230 volts, power consumtion 230V, vertical type, Rated pressure 5.6 bar pressure rating more than 8 bar suitable for high rise buildings,rust and shock proof ABS Outer body for lomg life,Stainless steel inner tank of 304 grade,65 MPa bar pressure,automatic shut off including four nos of rag bolts and making the elctrical / water supply connection including testing after installation complete all as specified and directed by Engr-in-Charge.
1
-
-
... More
Supply and fixing ceiling fans ( COPPER WINDING) complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed. Note:- Down rods of suitable length( 4feet,5 feet or 6 feet) is incl in the item rates and no extra payment will be done to the contractor for the same.
10
-
-
... More
Supply & fix HDPE pipe DWC grade 80mm bore in trench/ wall/floor for protection of Cable including making good of the distubed surface all as specified and directed.
110
-
-
... More
Supply and fix of lithium based energy efficient integrated all-in-one solar street light of Min 18 Watt plus/minus 2% ( Min 3000 lm) IP-65 &IK-08,pressure die cast, battery capacity min 20Ah@ 12.8V or 256Wh, panel capacity min 60 Wp with duly polyurethane coating (camaflouge colour),encases with monocrystaline solar PV panel of 65-67 WP(170/180 lm/watt) lamp with aluminium reflector for better light distribution CRI70 COLOUR TEMPERATURE 5700-6500K microcontroller basedcharge controller cum driver automatic diming function (first four hour at full brightness and rest of time at lower light level with PIR motion sensor dusk to dawn operation suitable to working temperature -10 to 55 C weight not less than 14-16 kg with adjustable MS clamp suitable for pole wall mounting etc complete as req protection short circuit overload reverse polarity and battery protection firm should provide vital parameter test report from NABL accredited lab and should be made in India with CE and ROHS complaint.
4
-
-
... More
Supply and fixing steel body Exhaust fan 300 mm sweep AC single phase, 230/240 volts 50 Hz with louvers and making connection from ceiling rose with twisted copper flexible wire 23/0.076 mm complete all as specified and directed.
2
-
-
... More
Material and labour Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS rounds 1.5 kgs, funnel ,watering pipe etc. all specified and directed including testing on completion.
1
-
-
... More
Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 20 cm girth.complete all as specified and directed.
40
-
-
... More
S&F energy saving ceiling fan of 1200 mm sweep of 330-370 RPM, 220-240 volts, AC, 50 Hz, ISI marked with five star rating including hanging with the help of fan hook, down rod up to 04 feet and connecting up with provn of 3 core copper flexible cable of size 1.5 sqmm from ceiling rose to fan complete all as specified and directed. Make : Havells, Model: ES-50 Premium or Usha, Model: Energia Star ISI or Crompton Greaves, Model: Empower 50
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%