Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Eprocure
Opening Date4 Nov 2024
Closing Date4 Dec 2024
Tender Amount₹ 3,93,70,000
Costs
EMD
₹ 4,69,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Summary
Addn Altn Cum Spl Repairs To Certain Or Md Accn At Grass Mandi
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_682398_1Tender No
CEBZ/MRT/T-24 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Demolition of cement concrete of ground floor n exc 15 cm in depth in any position nototherwise specifically provided for.
33
-
-
M&L 75 mm thick cement concrete 1:3:6 type C-2 using (40 mm graded stone agg) as in sub base
350
-
-
M&L coloured Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and no pigment laid over including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
350
-
-
Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each.
612
-
-
Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each.
504
-
-
Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm MS sheets complete all as specified & directed.
540
-
-
Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm MS sheets complete all as specified & directed.
1075
-
-
S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
657.36
-
-
M&L for built in steel cup board with pressed steel frame of size 75 mmx45mmx1.25 mm th with pressed steel shutter 1mm th Godrej pattern fixed to masaonary wall by hold fast made out of 25x3 mm flat iron including ms hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray including locking arragement painting with two coats of synthetic enamel paint over one coat of red oxide primer with two coats of syntetic enamel paint over one coat of red oxide primer all around on steel surface of frame & shutter and making good disturbed portion in cm 1:3 or pcc 1:2:4 complete all as specified.
269.28
-
-
M&L factory made gauged shutter shall be made out of angle iron 35x35x5mm and 25x25x5mm and 1.5mm thick, 10mm Square bars grill complete with stainless steel fly proof wire mesh having 0.63mm nominal dia wire and 1.4mm average with aperture including two coats of synthetic enamel paint over a coat of red oxide as shown on drawing all specified and directed by Engr-in -charge.
189.54
-
-
S&F for factory made 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.
1010.8
-
-
Supply and fixing for 35mm thick glazed and skeleton shutters of 2nd class hardwood open nebated and prepaired to receive glass gauge etc, (with sash bars) edgeg of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.20(a) complete all as specified and directed
97.27
-
-
Supply and fixing for stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple complete all as specified and directed by Engr-in-charge.
28.5
-
-
M&L for powder coated aluminium anodised window sliding type (3 shutters type) with sash bars, aluminium sections weighing 0.55 Kg/m(min) including stainless steel wiremesh , necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings such as, hinges, handles, including anodised aluminium frame, with one or more rebates including S&F 5 to 6 mm thick black glass including taking down existing window all as specified & directed by Engr-in-charge.
432
-
-
Supply and fixing powder coated aluminium ventilator made out of hollow extruded aluminium sections as mentioned below half fixed with froasted glass and half portion with openable sutter glazed with tinted glass 5 mm thick fixed with glazing clips rubber beading / gasket anodised aluminium beading screws and lock type handles of size 75 mm 2 Nos aluminium tower bolts 150 mm long etc complete all as specified and directed by Engr-in-charge.
Shutter top and bottom size : 37.50 x 15 x 1.60 mm thick
Shutter inner lock size 37.50 x 15 x 1.60 mm
Shutter side (handle) size 37.50 x 15 x 1.36 mm
Chowkat bottom size : 50.30x26x1.20 mm
Chowkat top & sides : 50.30x15x1.00mm
Make (i) Anodised aluminium section : Jindal/HINDAL Co/INDAL Co
(ii) Glass : SAINT GOBAIN/MODI GUARD/TATA
62.21
-
-
S&F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
160
-
-
Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified & directed.
576
-
-
S&F aluminium anodised tower bolts 150mm long, of extruded section.
432
-
-
S&F Mild steel sliding bolt 300 long plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified & directed
324
-
-
S&F Stainless steel butt hinges 100mm in size complete all as specified and directed.
459
-
-
S&F mild steel barrel tower bolt stove enameled black with bright bolt 200 mm long.all as specified & directed
792
-
-
Supply and fixing mild steel pressed handles oval type stove enamelled black of size 125 mm complete all as specified and directed by Engineer-in-Charge.
674
-
-
M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over and including a coat of pink primer (by spraying) all as specified & directed
571.11
-
-
M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel (by spraying) all as specified & directed
661.5
-
-
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc.
6.5
-
-
M&L for 18 to 20 mm thick udaipur green Stone factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.
130
-
-
M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete over 15mm thick screed bed in CM 1:4 all as specified
146.25
-
-
All as per item No 30 above but factory made bull nosed as in riser of steps, skirting/dadolaid over 10mm thick in cm 1:6 complete all as specified.
112.5
-
-
Material and labour for 18 mm thick Multi layer waterproof plywood (Make-Radium/sunrise or equivalent fixed with screws to timber frame work for cabinet car case both sides covered with o.80mm thick decorative laminates, "Mica" type 1 of surface finished , colour and pattern as approved fixed with approved adhesive as per makers instructions complete all as specified & directed.
348.75
-
-
S&F Auto hinges for cabinet case (Make ; KARF/HETICH)
576
-
-
S&F 150 mm size stainless steel bright finish handle for cabinet shutter
576
-
-
Supply and fix 150mm size helical door spring including roller and plate fixed with screws to wooden or welded to iron chowkat complete all as specified and directed.
360
-
-
S & F 25 mm stainless steel curtain rod with fancy type bracket.and ring complete all as specified and directed.
729
-
-
Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc.
8978.25
-
-
M & L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.
4440
-
-
M & L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth with out using extra cement complete all as specified & directed.
3937.5
-
-
M&L Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified.
600.75
-
-
Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition)
6.15
-
-
M&L Form work to sides and soffits of beams lintels etc finished rough
16.65
-
-
M & L RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in beams, lintels over 1.5 m span etc
4.32
-
-
M & L reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:6.including all neccesary formwork & finishing exposed concrete surface all as specified and directed
3.42
-
-
Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poining in cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc
1350
-
-
S&F mild steel deformed bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.
1395
-
-
Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises.
8370.6
-
-
M&L Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cemnt to match including 15 mm th screed bed in cm 1:6
628.02
-
-
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring all as specified
2823.49
-
-
S&F non skid ceramic tiles coloured of 7 to 8 mm (squre/ rectungular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement complete all as specified and directed.
2195.47
-
-
All as per item No 50.00 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
414
-
-
S&F Coloured Glazed ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete, all as specified
2309.62
-
-
Taking up or down steel tubing and connection 15 mm bore pipe and removing from site.
1386
-
-
All as per Sl Item No.53 here-in-before but 20 mm bore pipe.
1340
-
-
S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore.
1386
-
-
All as per item No. 55 above but 20 mm bore pipe.
1340
-
-
S&F triple layer 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and incl dismantling water tanks & removing complete all as specified.
72
-
-
S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete.
72
-
-
S&F in repair bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule (Make: Cera, Jaquar, Pearl)
360
-
-
S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron complete all as spd & directed. (Make: Cera, Jaquar, Pearl)
288
-
-
S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.
72
-
-
Supply and fixed in repair of PVC low level flushing cistern 10 litre capacity valveless syphonic action type white i as approved incl ball valve float valve and handle,32 mm dia flush pipe complete
72
-
-
S&F as in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified.
72
-
-
Supply & fix in repair PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.
288
-
-
Supply and fixing in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and wasters incl bedding in cement mortar to dwarf walls or incl fixing cantilever brackets and connecting union to pipe over all size (915mmx460mm bowl size 410x330x160mm) complete all as spd & directed. Make Hindustan/JINDAL
72
-
-
S&F in repair Brass chromium plated shower rose 125mm size all as specified and directed (make: Jaquar/cera/pearl or equivalent)
72
-
-
S&F in repair CP brass soap dish complete all as specified
72
-
-
Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 75mm bore as in waste and rain water pipes complete all as specified & directed.
94.5
-
-
Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed.
774
-
-
Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed.
72
-
-
Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed.
225
-
-
S & F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof.
162
-
-
S&F Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.fixed in repair)
144
-
-
Material & labour for sunken slab treatment comprising of the following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance n.exc. 250mm compete all as specified and directed.(b) Material & labour for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Material & labour for applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Material & labour for applying bitumin grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) Material & labour for 25mm thick plastering in CM 1:4 using water proofing compound (WPC) @ 3% by weight of cement. on wall of sunken floor (f) Material & labour for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g) Supply & fix of 32mm dia GI pipe medium grade, 450m long 9(for draining out the water) all as directed by engineer-in-Charge
22
-
-
M & L for cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finihes with and incl material and labore in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 /Bk work in CM 1:4 as required at site and as directed by Engr-in-Charge
120
-
-
S&F factory made 600 x 450 mm beveled edge mirror 5.5mm thick of selected quality glass and fixed to wooden plugs with chromium plated brass screws and cup washers (In repairs)
72
-
-
S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair. (Make: Jaquar, Pearl, Cera)
72
-
-
M&L PCC 1:3:6 type C-0 (using 12.5 mm greded agg) for hold fast pressed steel frame etc.
16.65
-
-
S&F (in repair)chromium plated towel rail 20mm dia D type 600 mm long as a approved quality.complete all as specified and directed.
72
-
-
Taking down old existing water proofing treatment any type from the top of RCC/ arch slab, including PCC padding or plaster, tiles, mud etc, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.
2082.8
-
-
Material and Labour for 20mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface and wall (WPC will be measured and paid seperately as supply only rate).
2082.8
-
-
Supply only liquid water proofing compound
75
-
-
Material & Labour for 40mm thick average thickness of PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement all as specified and directed.
1750
-
-
Material & labour for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed. (including existing water tank on roof disconnected and after cleanig same position connecting)
332.8
-
-
Material & labour for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with finally finish the top by providing PCC tiles of size (200x200mm) and (20-22mm) thick machine made laid on cement sand mortar (1:4) screed 12mm thick. The joint of the tiles shall be grouted and flush pointed with cement sand mortar (1:3) mixed with integral water proofing compound complete all as spd & directed.
1553.92
-
-
Supply and fixing PVC heavy duty waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed
144
-
-
S&F stainless steel plate rack of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one all as specified and directed Make : Bluestar/ Nirali/ Pearl.
72
-
-
M & L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered upto 3.5m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account).
153
-
-
M & L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account)
99
-
-
M&L of factory made fibre glass reinforced plastics (FRP) CHAJJA 4mm thick of M//s VHATT Fibre ways industries pvt ltd, M/sThakurella enterprises, M/s RD India Sahibabad, M/s DNGK Fibreways Pvt ltd brand in required colour and size and design made by resin transfer moulding (RTM machine technology, resulting in void free comact laminate in single peice having smooth gradual slope, curvature for easy drainage of water and duly reinforced by two nos vertically and one no horizontally by 250mmx2mm thick MS flat with 12mm inbuilt hole for grouting on the existing wall alongwith the 50mm flanges duly inserted and sealed in the wall complete in one single peice casted monolithically incuding all necessary fittings etc fixed in any position and height complete.
72
-
-
M&L injecting chemical emulsion for Post Constructional Anti-termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.
252
-
-
Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors
819
-
-
S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete GDE Fe 410-S
900
-
-
M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified.
1040
-
-
Supply & fix wall mixer with over head shower chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes complete all as specified and directed. (Make: Cera, Jaquar, Pearl)
72
-
-
S&F sink mixer with swinging spout (Wall mounted model) complete all as spd & directed. (Make: Cera, Jaquar, Pearl)
72
-
-
S&f Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long
72
-
-
Supply and fix glass corner shelf fancy type made of 6 to 7 mm thick sheet glass of size 250mmx250mm fixed with chromium plated brackets complete all as specified and directed.
72
-
-
Supply & fix in repair 50 mm wide rubber beading for doors of required size complete all as specified & directed.
234
-
-
S&F factory made 600 x 450 mm beveled edge mirror 5.5mm thick of selected quality glass and fixed to wall by wooden plugs with chromium plated brass screws and cup washers
72
-
-
M&L for 18 to 20 mm thick black granite factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.
105.32
-
-
M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and directed.
595
-
-
Preparation of new plastered surface of wall by applying 2mm thick water proofing exterior graded wall putty and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed.
9090
-
-
Preparation of old surface after complete removal of existing treatment by mechanical means and applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed.
2565
-
-
M& L preparing plastered new surfaces of ceiling and applying 2mm thick wall care putty and two coats of oil emulsion distemper on ceiling surface
600.75
-
-
All as ser item No. 105.00 above but one coat on old ceiling surface.
2014
-
-
M & L preparation of new plastered surface of wall and applying two coats of exterior emulson paint (weather proof) using using roller over and including applying 2mm thick putty after finishing the wall surfaces complte all as specified and directed.
3937.5
-
-
M&L applying two coats of exterior emulson paint on old surface (weather proof) using spray gun machine over and including applying 2mm thick putty after scraping surface by mechanical means and finishing the wall surfaces complte all as specified and directed.
2565
-
-
Demolition of brick work built in cement morter including all quoins, arches, pillars etc, complete.
18.5
-
-
Demolition and breaking up of drain pipe salt glazed stoneware of 150mm bore set in cement mortar complete all as specified and directed.
365
-
-
M & L 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed as specified
365
-
-
M & L Concrete bed to drain pipes including packing under and completely surrounding
pipes with concrete after they are laid and tested; in for 150mm dia pipe.
365
-
-
Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and getting out complete in soft / loose soil for demolition of existing sewage pipe and laying of new pipe line.
82.95
-
-
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft / loose soil.
64.45
-
-
Removing excavated materials n exc 50 mtrs and deposited where directed at a level n exc 50 mtr where directed n exc 1.50 m above the starting point.complete all as specified and directed.
39.23
-
-
M & L Brickwork with fly ash modular bricks, straight or curved on plan exc 6m mean radius, built in 1:6
11.7
-
-
M&L brick work with sub class' B' bricks (except bricks) of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6.
6.8
-
-
M&L for applying 15mm thick rendering using ready mix plaster bags on brick or concrete surface of external/internal wall finished even and smooth. Note: contractor is required to deposite ready mix bags for 100% CA quantity to Engr-in-Charge with in 15 days of acceptance of contract. Make: Ultratech, Rediplaster, Birla, Aeccrocem.
145.8
-
-
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm pipe
72
-
-
Demolition of reinforced cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground level) reinforced.
2.59
-
-
M & L mild steel deformed or twisted bar(TMT bar)10mm dia and cover cut to length bent to shape reqd, incl, cranking benching spirally for copying for columns hooking ends and bending with and including MS wire annealed wire not less than 0.9 mm dia.
408.5
-
-
M&L for pcc 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work
2.59
-
-
RCC Septic Tank designed to carry sewage and slugge water, excavation in any type of soil PCC 1:4:8 below foundation, RCC M-30 Design Mix in walls, Base Slab, Baffle walls and Roof Slab including beams etc with Vent Shaft, manhole openings with cover connection etc, complete with effective depth of 1.5 meter and overall depth 3 meter for 150 user conventional.
2
-
-
Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconneting pipes of RCC/DWC complete filled with bricks of size 3.6M dia x 4.5M effective depth.
2
-
-
Excavating in post holes ( or similar holes) each in soft/loose soil not exc. 0.50 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm all as specified and directed.
130
-
-
M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in bed block for fixing of pintal hinges ad hold fast, coping etc all as specified and directed.
11.85
-
-
S&F Structural steel framed work as in ornamental type gates of angle or other section for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts etc. complete to be prepared for hanging or sliding complete steel conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.
1985
-
-
Mild steel work as in fencing posts and struts, fixed independently, cut and bent to shape as directed including all necessary welding, drilling for holes, notching for wire flat iron fillets for securing barbed wire or chain link fencing etc and similar work quality conforming to Fe 410-O or Fe 310-O complete all as specified and directed.
1795
-
-
Supply only Chainlink MS galvanisd fencing any size or type
2385
-
-
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc, including provision of binding wire all as specified and directed.
720
-
-
S&F Mild steel bolts purpose made with hexagonal or square head one end other end and screwed the other n'exc 15cm long and dia of neck 12 mm, conforming to relevent IS all as specified and directed.
110
-
-
M&L Preparing and applying two coats of synthetic enamel paint on new steel /iron surfaces over a coat of red oxide.
60
-
-
S & F MS round bar including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 all as specified and directed.
1395
-
-
S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc wind ties for foof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe-290 Gde E-165 complete all as spd & directed.
750
-
-
ITEAMS OF E/M
-
-
-
Taking down carefully copper/aluminium point wiring light, fan, socket or power point complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings, bell push, bell buzzer etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
152
-
-
Taking down unserviceable main switch, DBs with MCBs any size and capacity including making good disturbed surface of wall complete all as specified and directed.
34.95
-
-
Taking down light duty Exhaust fan metal body with sturdy steel bird cage,double ball bearing and heavy duty motor copper winding, metal blades and fixing accessories 230 Volt and any sweep and depositing to MES store yard for keeping in safe custody complete all as specified and directed.
100
-
-
Taking down water heater vertical storage type 25 Ltrs capacity having stainless steel inner tank with glass enamelled coating , closed /ventilated type, 240 volts, glass coated heating element complete with all accessories and depositing to MES store yard for keeping in safe custody complete all as specified and directed.
200
-
-
Taking down and disconnecting ceiling fan of any size, sealing cable end, dismentalling blades, make one set of three blades and depositing to MES store yard for keeping in safe custody and refixing after completion of work as per requirement complete all as specified and directed.
205.9
-
-
M & L for point wiring using 1.50 sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded (FRLS-H) copper conductor cable in proper colour coding drawn into and including non metallic rigid PVC conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed, sunk cast iron or 1.6 mm thick pressed steel terminal box for mounting fittings i.e, normal piano switch / sockets incl cover plate with frame and covered with 3 mm thick white bakelite / laminated hard glossy surface sheet top cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size stranded FRLS-H copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed for the following: - Note: also includes inverter wiring with one run of inverter wire 1.5 sqmm all alongwith circuit also included.
-
-
-
One tube light/Bulb/ security light/ bell point controlled by one, one way switch 05 / 06 Amps.
992.75
-
-
One fan point controlled by one, one way switch 05 / 06 Amps.
992.75
-
-
OneExhaust fan point controlled by one, one way switch 05 / 06 Amps.
992.75
-
-
One Wall fan point controlled by one, one way switch 05 / 06 Amps.
992.75
-
-
All as per serial item no. 140 here-in-before but with 2.5 sqmm nominal crosssectional area copper conductor cable for one 5/6 Amps socket on independent board point controlled by one, one way switch 5/6 Amp.
1131.39
-
-
All as per serial item no. 140 here-in-before but with 2.5 sqmm nominal crosssectional area copper conductor cable for one 5/6 Amps socket on same board point controlled by one, one way switch 5/6 Amp.
290.8
-
-
All as per serial item no. 140 here-in-before but with 2.5 sqmm nomonal crosssectional area copper conductor cable for one light/fan point given from 5/6 Amps socket on same board point controlled by one, one way switch 5/6 Amp.
1131.39
-
-
M & L for power point wiring of copper cable FRLS grade,multi stranded 2.5 Sqmm size for 15/16 Amps socket outlet on independent board with 2.5 Sqmm size of copper cable FRLS-H grade,multi stranded earth conductor cable in proper colour coding drawn into and including non metallic rigid PVC conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed, sunk cast iron or 1.6 mm thick pressed steel terminal box for mounting fittings i.e, modular switch / sockets incl cover plate with frame and covered with 3 mm thick white bakelite / laminated hard glossy surface sheet top cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 2.50 sqmm size stranded FRLS-H copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed.Note for item No 146,147 :- Switch, Socket out-let etc will be measured and paid separately.
1131.39
-
-
Supply and fixing normal piano flush type switch 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.
120.8
-
-
Supply and fixing normal piano flush type socket outlet 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.
142.6
-
-
Supply & fixing of normal piano flush type socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed .
224.6
-
-
Supply and fix in normal piano flush type switch 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed.
218.4
-
-
Supply and fixing normal piano flush type bell push flush type , 5 amps , 240 volts complete all as specified and directed.
134.1
-
-
Supply and fixing ding dong bell,AC , 230 volts ,Single pole complete all as specified and directed.
357
-
-
Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate complete all as specified and directed.
106.5
-
-
Supply and fixing Led lamp 9 watt suitable for batten/ angular holder complete all as specified and directed.
113
-
-
Supply and fixing decorative wall mounted LED tube light fitting 20 watt with polycarbonate housing and integrated electronic driver with all accessories and fixing material complete all as specified and directed.
465
-
-
Supply and fixing decorative LED tube light fitting 10 watt wall mounted with extruded polycarbonate ,integrated lamp & driver with opal diffuser and decorative end plates complete with all accessories and fixing material complete all as specified and directed.
408
-
-
Supply and fix decoratiive wall light fixture made up of polycarbonate body with and including 10 watt led lamp complete all as specified and directed.
540
-
-
Supply and fixing 25 W LED security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver with die cast aluminium housing IP 66 protection with lens embedded PC cover including security light brackets made of 32 mm dia GI pipe medium grade upto 0.9 mtr long bend to shape at 100-120 degree including flat iron clamps and suitable nuts and bolts grouted in wall including all material required for fitting complete all as specified and directed.
1447
-
-
Supply and fixing LED back lit Bulk Head luminaires surface mounted IP 66 protection 10 watt complete all as specified & directed.
991
-
-
Supply & fixing of ceiling rose, 3 terminal , PVC/polycarbonate isolated body complete all as specified & directed.
65.7
-
-
S & F of sub main wiring alongwith earthwire for two single core 6.00 sqmm size sub main wiring with one single core 6.00 sqmm size earthwire drawn into and including one run 25 mm or higher dia PVC conduit fixed concealed. PVC insulated PVC unsheathed multi-stranded copper conductor cable FRLS in and including PVC conduit medium grade ISI marked, fixed concealed of size as mentioned below complete with all conduit all accessories / fittings as required at site and connecting of earthwire to common earth dolly complete all as specified and directed.
Note :- Three run of 6.00 sqmm copper cable and one run of conduit shall be measured as one unit.
259.2
-
-
Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.
1669
-
-
Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 40 Amps, 10kA and making connections complete all as specified & directed.
208
-
-
Supply & fixing MCB, SPN, AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed.
408
-
-
Supply and fix MCCB 4 pole,100 Amps 25 kA with fixed overload and fixed short circuit setting Ics= 100% Icu complete all as specified & directed.
3016
-
-
Material and labour for earthing with galvanised steel earth plate electrided 600 X 600 X 6 mm thick buried in ground (earth pit not less than 2.25 mtr depth below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth lead wire 4.0 mm dia by means of bolts nuts chek nuts and washers of galvanized iron or steel earth lead wire protected by and including 15 mm dia GI pipe medium grade pipe for protection and 20 mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earth work as in soft/loose soil, concrete pit in PCC (1:3:6) type c1, pre cast RCC 1:1:5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 100 mm CC both way and 2 No, lifting handle made of 12mm dia TMT bar and set in cement mortor (1:4), funnel wire nesh, char-coal or coke and salt in alternate layer, testing etc complete all as specifide in electrical plate No. 3 of SSR Pt-1 all as specified and directed.
12
-
-
Supply and fixing light duty Exhaust fan made of metal body complete with louvers shutter, voltage 230 V, 50 Hz, Rpm 1200, copper winding and fixing accessories 230 Volt and 300mm sweep with and including making hole of suitable size in the wall, plastering the surface making good damaged portion with plaster in CM 1:4 incl recolouring complete all as specified and directed.
2200
-
-
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor ( BLDC).
2649.47
-
-
Supply Install and testing water heater vertical storage type 25 Ltrs capacity having stainless steel inner tank with glass enamelled coating BEE 5 star rating, closed /ventilated type, 240 volts, glass coated heating element complete with all accessories, including fixing arrangement with syitable size of fastner, nuts, bolts and washer etc incl making good disturbed surface with plaster in CM 1:4 complete all as specified and directed. Note:- Installation of geyser includes all connected items eg. PVC pipe for connection of inlet and outlet complete.
10029.54
-
-
Supply and fixing wall mounting fan 300 mm sweep high speed with control and PVC blades complete all as specified and directed.
2577
-
-
Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison for fixing of 1 No MCCB and 12 Nos MCB's inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed.
8190
-
-
Supply, installing, testing and commissioning of LT out door type factory made(CPRI Approved ), junction box of size 750mmX600mmX500mm (over all dimension ) with mild steel angle iron of size 50X50X6mm vertical frame and legs with mild steel Angel iron 600x50X6 mm in horizontal sides of the frame LT Junction box (KIOSK), outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system,The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15mm CRCA MS sheet and 50x50x6 mm thick angle iron frame work, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front & back opening type, with aprons for cable entry, and fixing danger notice plate made of 1.6mm thick mild steel sheet, vitreous enameled white, of size 20 x 15cm with letter, figures and conventional skull bones in signal red colour and fixed front & back door pillar box etc with voltage and danger indiated in Hindi and English complete all as specified and directed.with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) stranded lock-2Nos with 3 keys.
2
-
-
Aluminium bus bar (LxWxH)400 x 10x50 mm with drilled holes for incoming /out going cable core connection including aluminium lugs ,GI bolts ,Nuts and washers of suitable size . Porcelain / synthetic bridge insulators, heavy duty with necessary steel / GI screws ,bolts, nuts and washers -08 Nos , complete all as specified and as directed. , The platform shall be such that it is of a height 30 cm above the nearest road level. complete all as specified and directedincluding connections of all out going/in coming existing cables of size 25/35/50/95/120/ 150 sqmm by drawing /digging out cable from loops in trenches out side the Bldg inclusive of necessary excavation and earth work as required and relaying the cables with retrieved bricks and providing new sand cushioning and crimping suitable size lugs for terminal connections of cables, necessary brick foundation with plastering to the Panel board with control switches complete all as specified and as directed Engr-in-Charge (NOTE:-1 Panel should be 61439 Panel Builder should Submit All Certificate Before Executing the job.)
-
-
-
Supply, installing, testing and commissioning, factory made and tested . LT feeder pillar box (KIOSK) 1200mm x1000x600mm size, outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated aluminum bus bars 800 Amps rating installed on porcelain insulators. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15mm CRCA MS sheet and 50x50x6mm thick angle iron frame work and legs with mild steel Angel iron 600x50X6 mm in horizontal sides of the frame , powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front opening type, with aprons for cable entry, and fixing danger notice plate made of 1.6mm thick mild steel sheet, vitreous enameled white, of size 20 x 15cm with letter, figures and conventional skull bones in signal red colour and fixed front & back door LT panel etc with voltage and danger indiated in Hindi and English with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) stranded lock with 2 keys, internal wiring with PVC insulated, stranded copper conductor, FRLS cables, IS-694 marked of adequate size but not less than 1.5 Sqmm.
1
-
-
The platform shall be such that it is of a height 30 cm above the nearest road level. complete all as specified and directedincluding connections of all out going/in coming existing cables of size 25/35/50/95/120/ 150 sqmm by drawing /digging out cable from loops in trenches out side the Bldg inclusive of necessary excavation and earth work as required and relaying the cables with retrieved bricks and providing new sand cushioning and crimping suitable size aluminium lugs for terminal connections of cables, necessary brick foundation with plastering to the Panel board, All out going feeders shall be connected by cable through suitable size gland plate / glands.& The various feeders shall be indicated by 50 mm size letters in synthetic enamel white paint with control switches complete all as specified and as directed Engr-in-Charge , The scope of work includes the following: (NOTE:-1 Panel should be 61439 Panel Builder should Submit All Certificate Before Executing the job.)
-
-
-
(I) Incoming :- (i) MCCB 4 Pole, Microprocessor Based 630A, Breaking capacity 36 KA, 415 V, 50 Hz with OL, SC, EF protection, Ics = 100% Icu, confirming IEC 60947, -01 Nos along with Spreader terminals (Make : Siemens: / L&T/ Legrand & Equivalent Schneider )
(ii) Digital Amps/volt /PF meter 0-500 volts with selector switch - 01 No (Make : Siemens: / L&T/ Legrand & Equivalent Schneider )
(iii) Indicator lamp LED type (R, Y, B) complete with fuse -01 Set (Make : Siemens: / L&T/ Legrand & Equivalent Schneider ) II) Outgoing :-
(i) MCCB 4 Pole, Thermal Magnetic Based 250A, Breaking capacity 16 KA, 415 V, 50 Hz with OL, SC, EF protection, -02 Nos along with Spreader terminals (Make : Siemens: / L&T/ Legrand & Equivalent Schneider )
(ii) MCCB 4 Pole, Thermal Magnetic Based 200A, Breaking capacity 16 KA, 415 V, 50 Hz with OL, SC, EF protection, -02 Nos along with Spreader terminals (Make : Siemens: / L&T/ Legrand & Equivalent Schneider )
(iii) MCB TPN 63 Amp C-Curve -2 No (Make : Siemens: / L&T/ Legrand & Equivalent Schneider )
-
-
-
Supply, installing, testing and commissioning, factory made and tested . LT feeder pillar box (KIOSK) 1200mm x1000x600mm size, outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated aluminum bus bars 600 Amps rating installed on porcelain insulators. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15mm CRCA MS sheet and 50x50x6mm thick angle iron frame work and legs with mild steel Angel iron 600x50X6 mm in horizontal sides of the frame , powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front opening type, with aprons for cable entry, and fixing danger notice plate made of 1.6mm thick mild steel sheet, vitreous enameled white, of size 20 x 15cm with letter, figures and conventional skull bones in signal red colour and fixed front & back door LT panel etc with voltage and danger indiated in Hindi and English with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) stranded lock with 2 keys, internal wiring with PVC insulated, stranded copper conductor, FRLS cables, IS-694 marked of adequate size but not less than 1.5 Sqmm.
1
-
-
The platform shall be such that it is of a height 30 cm above the nearest road level. complete all as specified and directedincluding connections of all out going/in coming existing cables of size 25/35/50/95/120/ 150 sqmm by drawing /digging out cable from loops in trenches out side the Bldg inclusive of necessary excavation and earth work as required and relaying the cables with retrieved bricks and providing new sand cushioning and crimping suitable size aluminium lugs for terminal connections of cables, necessary brick foundation with plastering to the Panel board, All out going feeders shall be connected by cable through suitable size gland plate / glands.& The various feeders shall be indicated by 50 mm size letters in synthetic enamel white paint with control switches complete all as specified and as directed Engr-in-Charge , The scope of work includes the following: (NOTE:-1 Panel should be 61439 Panel Builder should Submit All Certificate Before Executing the job.)
-
-
-
(I) Incoming :- (i) MCCB 4 Pole, Microprocessor Based 400A, Breaking capacity 36 KA, 415 V, 50 Hz with OL, SC, EF protection, Ics = 100% Icu, confirming IEC 60947, -01 Nos along with Spreader terminals (Make : Siemens: / L&T/ Legrand & Equivalent Schneider ) (ii) Digital Amps/volt /PF meter 0-500 volts with selector switch - 01 No (Make : Siemens: / L&T/ Legrand & Equivalent Schneider ) (iii) Indicator lamp LED type (R, Y, B) complete with fuse -01 Set (Make : Siemens: / L&T/ Legrand & Equivalent Schneider ) (II) Outgoing :- (i) MCCB 4 Pole, Thermal Magnetic Based 160A, Breaking capacity 16 KA, 415 V, 50 Hz with OL, SC, EF protection, -02 Nos along with Spreader terminals (Make : Siemens: / L&T/ Legrand & Equivalent Schneider ) (ii) MCCB 4 Pole, Thermal Magnetic Based 200A, Breaking capacity 16 KA, 415 V, 50 Hz with OL, SC, EF protection, -02 Nos along with Spreader terminals (Make : Siemens: / L&T/ Legrand & Equivalent Schneider ) (iii) MCB TPN 63 Amp C-Curve -2 No (Make : Siemens: / L&T/ Legrand & Equivalent Schneider )
-
-
-
Supply, installing, testing and commissioning, factory made and tested . LT feeder pillar box (KIOSK) 900mm x800 x 500mm size, outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated aluminum bus bars (LxWxH) 400 x 10 x50 mm installed on porcelain insulators. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15mm CRCA MS sheet and 50x50x6mm thick angle iron frame work and legs with mild steel Angel iron 600x50X6 mm in horizontal sides of the frame, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front opening type, with aprons for cable entry, and fixing danger notice plate made of 1.6mm thick mild steel sheet, vitreous enameled white, of size 20 x 15cm with letter, figures and conventional skull bones in signal red colour and fixed front & back door LT panel etc with voltage and danger indiated in Hindi and English with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) stranded lock with 2 keys, internal wiring with PVC insulated, stranded copper conductor, FRLS cables, IS-694 marked of adequate size but not less than 1.5 Sqmm.
5
-
-
The platform shall be such that it is of a height 30 cm above the nearest road level. complete all as specified and directedincluding connections of all out going/in coming existing cables of size 25/35/50/95/120/ 150 sqmm by drawing /digging out cable from loops in trenches out side the Bldg inclusive of necessary excavation and earth work as required and relaying the cables with retrieved bricks and providing new sand cushioning and crimping suitable size aluminium lugs for terminal connections of cables, necessary brick foundation with plastering to the Panel board, All out going feeders shall be connected by cable through suitable size gland plate / glands.& The various feeders shall be indicated by 50 mm size letters in synthetic enamel white paint and taking out of old skelton type panel with control switches complete all as specified and as directed Engr-in-Charge , The scope of work includes the following:- (Grass mandi) (NOTE:-1 Panel should be 61439 Panel Builder should Submit All Certificate Before Executing the job.)
-
-
-
I) Incoming :- (i) MCCB 4 Pole, Thermal Magnetic Based 160A, Breaking capacity 16 KA, 415 V, 50 Hz with OL, SC, EF protection, -01 No along with Spreader terminals (Make : Siemens: / L&T/ Legrand & Equivalent Schneider )
(i) Digital Amps/volt /PF meter 0-500 volts with selector switch - 01 No (Make: Siemens/Schneider/legrand /AE/SELEC) (ii) Indicator lamp LED type (R, Y, B) complete with fuse -01 Set (Make: Siemens/Schneider/legrand /AE/SELEC) (II) Outgoing :-
(iii) MCB TPN 100 Amp C-Curve -5 No (Make : Siemens: / L&T/ Legrand & Equivalent Schneider )
-
-
-
M&L for plate earthing for LT panels equipments complete with galvanised mild steel plate electrode 60 cm x 60 cm x 6.3 mm thick buried directly in ground vertically (in earth pit not less than 3.5 m below normal ground level) with the top edge of the earth plate at a depth not less than 2.75 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth strip 32 x 6 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth plate at one end and connected to metallic bodies of HT/LT equipments etc at the other, earth strip encased in and including 40mm bore GI light grade pipe with all fittings from top of electrode to body of equipment fixed with and including 25 x 3mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-O using 12 mm graded crushed stone aggregate excavation & earth work and RCC cover complete all specified and shown in electrical plate No 5 of SSR Pt-I.
11
-
-
Taking out old unsv any type Over head line and Supply, laying, jointing, testing and commissioning LT underground cables, 1100 volts grade, XLPE insulated and PVC sheathed, heavy duty armoured, with multistranded aluminium conductors, IS-7098 (marked, laid in trenches / ducts / fixed on poles / walls / laid under roads / paths / drain / culverts or encased in GI pipe complete all as specified and directed. Cables of the following sizes:-(Note;- Rate quotted includes terminal Lugs / road cutting/ wall cutting/ floor cutting and making good damged portion matching with existing surface with all existing finishes.) (Note :- Excavation & earthwork, duct work, GI pipe for laying of cable and sand cushioning / cable protection covers etc are beyond the scope of this item and shall be measured & paid for separately under respective items of Sch `A')
-
-
-
16 Sqmm 4 core
400
-
-
50 Sqmm 4 core
600
-
-
95 Sqmm 3.5 core
350
-
-
240 Sqmm 3.5 core
175
-
-
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in Soft/Loose soil including trimming sides and bottom of trenches complete all as specified in the following type of soils:
240
-
-
Returning, filling-in, including spreading, watering and well ramming in layers not exceeding 25 cm thick each, in soft /loose soil complete all as specified in the following type of soils
133.5
-
-
Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.
106.49
-
-
Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables complete all as specified.
86.4
-
-
M & L Bricks for protection cover to under ground cable (with standard size fly ash bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10mm as directed.
9.6
-
-
Supply and laying galvanised steel water tubing, light grade, IS-1239 marked with all fittings (IS marked) and laid in trenches / under roads / in drains / fixed to poles/walls incl removing unsv pipes any type and size ( with required size flat iron clamp bolts, nuts and washers ) pipes of the following sizes :-
-
-
-
(a) 50 mm bore
20
-
-
(b) 80 mm bore
20
-
-
(c) 100 mm bore
12
-
-
M&L for auguring of hole suitable for passing 40mm to 100mm bore pipe in true horizontal position under road, PCC paths etc., by means of mechanical ring/ auger after doing ultrasound to prevent any damage to existing cables pipe line specified and directed coming in the route not exceeding 1.5 m in depth below existing surface level of road and not excd 30M in length complete all as specified. Note: Pipe shall be measured and paid separately under appropriate items and any dahage to existing cables of anytype shall be made good by the Bidder without any extra cost to department.
20
-
-
M&L Cutting of worn-out / burnt aluminium cable terminal lugs from the HT/LT cable , crimping of new aluminium cable core and fixing with transformer/ Panel MCCB terminal/ FPB/ JB/ pole/DBs/ stud including cutting/ dressing of cable, disconnecting under ground / OH line cable conductor , cutting down worn-out portion and refixing with suitable lugs complete , including under ground cables of any type and size for repairs including taking out underground cable loop from ground and making connections of restoration of electric supply complete all as specified and directed Engr-in-Charge .
Note:- (Excavation, earth work , taking out cable protection covers, and sand cushion and relaying the same shall be deemed included in the unit rate quoted by Contractor)
4
-
-
S&F pole mounting type junction box factory made of size 350x250x150mm of FRP sheet duly powder coated with front openable hinged door , locking arrangements, with 4 Nos aluminium bus bars 40 Amps rating mounted on porcelain insulator, cable glands and lugs consisting DP 6 Amps 'C' series (Make of MCB :Legrand / C&S / ABB) ,mounted on MCB rail -01 no. including mild steel flat iron clamp made out of 40x4mm FI, nuts, bolts and washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified Engr-in- Charge.
4
-
-
Supply & fixing Unplasticised PVC pipes of prssure rating 10Kgf/cmSq 20 mm bore and 3mm thick complete fixed on pole using suitable clamps nuts & bolts (not less than 03 Nos) complete all as specified and as directed
28
-
-
Supply & fixing 1.5 Sqmm three core (nominal area) PVC insulated and PVC sheathed multi stranded unarmed Copper conductor cable LT 1100 volt grade FRLS drawn through pole for connecting to street light and pole JBs with cable terminal (MAKE: HAVELLS,FINOLEX, MESCAB, KEI) pole wirings connecting up with streetlight feeder(Junction box) . complete all as Specified and directed Engr -in -Charge
36
-
-
S&F service main distribution (SMC JUNCTION BOX ) box minimum inside size 395 x 235 x 150 mm with Bus bar 200 amps 4 pole for distribution of multiple nos of service connection, (ISI marked )weather and moisture-proof, nuts and bolted bus bar system, 200 Amps capacity and fixing on pole/wall with suitable FI clamp nuts and bolt complete all as specified and directed. (Make : Mahendra/ Sintex and equivalent )
2
-
-
Dismantling old existing ACSR conductor of any type/size.
1.5
-
-
Dismantling old existing MS cross arms of any type/shape.
2
-
-
Dismantling old existing Insulators of any type/shape.
30
-
-
Excavation in trenches in soft/lose soil n.exc. 1.5 M wide & n.exc 1.5 M deep for laying of GI/CI pipe line & getting out including forming botton surface all as specified and directed.
280.02
-
-
All as per item No 210 above but in Hard /dense soil including cutting of roads/PCC floors etc.
30
-
-
Returning, filling-in trenches including spreading, levelling, watering and well ramming in layer n.exc. 250mm in any type of soil after the pipe laid & tested complete all as specified and directed.
300
-
-
Removing excavated surplus soil to a sistance n.exc 50 mtr and depositing where directed at a level n.exc. 1.5 m above the starting point all as specified and directed.
20
-
-
Cutting of existing CI pipes and reducing to required length before laying in position for insertion of new tees, branches etc complete all as specified and directed. For following size:- Note: Fitting will be measured and paid for seperately under respective item
-
-
-
100 mm dia bore
4
-
-
80 mm dia bore
4
-
-
Disconnecting and taking up old existing CI water tubing and connection /grade and in any position of trenches / under floors / on walls etc. including connected fitting / accessories and fixtures such as bend, Tee, Valve ectc. All as specified for the following sizes:-
-
-
-
100 mm dia bore
30
-
-
80 mm dia bore
60
-
-
Disconnecting and taking up old existing GI water tubing and connection /grade and in any position of trenches / under floors / on walls etc. including connected fitting / accessories and fixtures such as bend, Tee, Union, Valve ectc. all as specified for the following sizes:-
-
-
-
80 mm dia bore
60
-
-
50 mm dia bore
279
-
-
25 mm dia bore
180
-
-
20 mm dia bore
670
-
-
(e) 15 mm dia bore
200
-
-
M&L DI/CI special class B as per IS such as bends, tappers, any type branches cross all sockets and spigot collar caps, flanged and plug upto 250 mm bore all as specified and as directed.
160
-
-
S&F in replacement including testing and commissioning of PPRC pipe PN 16 Mpa/SDR 7.4 /SS 3 layer including fitting like elbow, union, flange, Tee and bend etc complete of following sizes all as specified and directed by Engr-in-charge:- Make: SFMC Pvt Ltd. Vectus Industries Ltd.
-
-
-
110 mm dia bore
28
-
-
90 mm dia bore
100
-
-
63 mm dia bore
222
-
-
32 mm dia bore
140
-
-
25 mm dia bore
540
-
-
20 mm dia bore
200
-
-
M &L PPR gate valve with iron wheel head for PPR pipe including tasting of following Make: SFMC Pvt Ltd. Vectus Industries Ltd.
-
-
-
(a) 63 mm dia bore
8
-
-
(b) 32 mm dia bore
5
-
-
(c) 25 mm dia bore
72
-
-
(d) 20 mm dia bore
5
-
-
Supply and fixing bib taps 15 mm dia, PTMT any colour, high pressure screwed for iron pipes and fixed to pipe (minimum weight) not less than 90 gms) fixed in repair complete all as specified and directed.
72
-
-
M&L cement concrete type B-1 1:2:4 (20mm grade stone aggregate) as in door cills, path and plinth protection (of any section) including chambers, weathering, throating etc and setting in mortar complete all as specified and directed.
3
-
-
S& F of galvanised fitting like TEE, Elbow, socket, union, reducer, nipple of suitable for existing GI tubing of size upto 50 mm for preventing leakage if any of make new branches connection complete all as specified and directed.
60
-
-
Taking down and supply and fix valves, sluice, flanged of class 1.6PN, 150mm (6") dia.
1
-
-
Taking down and supply and fix valves, sluice, flanged of class 1.6PN, 100mm (4") dia.
1
-
-
Taking down and supply and fix valves, sluice, flanged of class 1.6PN, 80mm (3") dia.
2
-
-
Boring of holes upto 260mm dia under road , payment, hard standing by trenchless technology using ultra sounding technique and necessary machine.
30
-
-
M& L for construction of brick masonary valve pit of size 1000x1000x1000mm incl necessary excavation and earth work and disposal of surplus soil upto 50m, BB work in CM 1:6, 10mm plastering internally in cement mortor 1.4, PCC 1:2:4 100mm thickat bottom and top wall as copling of valve pit, MS sheet 3mm thick cover double door fixed in angle iron frome 35mmx35mmx5mm and 40mmx40mmx5mm at bottom for accommodation cover duly embaded in PCC coping with 25x3mm FI lugs 30mm long, one on each side, 12mm dia MS handle made to shape, locking arrangement with 1 No. Lock with two keys NAVTL/Godrej/Harrison 50mm incl two coats of Synthetic enamel paint over a coat of red oxide zinc chrome primer on steel surface complete all as specified and shown on drawing.
3
-
-
M&L for contruction of brick masonary valve pit of size 750x750x600mm incl necessary excavation and earth work and disposal of surplus soil upto 50m, BB work in CM1:6, 10mm, plastering internally in cement mortor 1.4, PCC 1:2:4 100 mm thickat bottom and top wall as copling of valve pit, MS sheet 3mm thick cover double door fixed in angle iron frame 35mmx35mmx5mm and 40mmx40mmx5mm at bottom for accomadating cover duly embaded in PCC coping with 25x3mm FI lugs 300mm long, one on each side, 12mm dia MS handle made to shape locking arrangement with 1 No lock with two keys NAVTAL/Godrej/Harrison 50mm incl two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on steel surface complete all as specified and shown on drawing.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%