Military Engineer Services Tender

Supply only integral waterproofing compound of approved make complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L, brick work with fly ash bricks old size, straight or curved on plan exc. 6.0M mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for preparation of New Surface plastered surface of walls, applying two coat of cement base paint over coat of primer on walls complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in Concrete, brick work masonry, etc. and portion making good disturbed ground complete all as specified and directed

Dismantling of chain link fencing of any description and type complete all as directed

Excavation in post hole (or similar hole) each n exc 0.50 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n. exc 25 cm etc and getting out soft/ loose soil complete all as specified and directed

M&L for PCC 1:3:6 type B2 using 40 mm graded stone aggregate as in foundations filling and mass concrete filling, etc complete all as specified

S&F for mild steel work as in posts and struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified

S&F mild steel framed work as in doors / gates / steel frames / chowkats etc. of angle or other section with gusset plates, rails, braces, etc., complete conforming to Grade E - 410 (Fe 250), drilled for fixing of steel sheeting or other covering including necessary welding etc and fixing in position complete, all as specified & directed.

S&F in repair galvanised two strand steel barbed wire with 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rail strain-ing bolts including, securing or tying at crossing with and provision of galvanised mild steel wire, staplesor steel pins, etc. complete all as specified and as directed .

S&F for Concertina Coil Punched type 600mm dia , Central core wire - made from high tensile , spring steel - high carbon wire conforming to IS 4454/Part-/Garde-Sm duly hot dipped galvanized with diameter staring from 2.50mm, UTS 1670N/mm2, heavy zinc coating with minimum 230gms per srm. Razor punched tape - galvanized steel strip As per IS 513/D.D Grade/2004, with concertina clips heavy duty J clipsto be used for making concertina coilswhich is made from steel Fe410.

Supply only Chain Link MS galvanized fencing of any size and any type as approved complete all as specified and directed

Fixing Only Chain Link fencing including line wires, any mess, size and type to any type of standards, rails, straining bolts, etc including provision of binding wires, complete all as specified and directed

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer surfaces including preparation of surfaces all as specified and directed.

Dismantling of Trellis work (Jafri)/RCC jali complete all as specified and directed

M&L for Providing precast cement concrete type B-O using 12.50 mm graded stone aggregate louvres and jallies set in CM 1:4, 35mm thick (measured solid), including all mould- ings but excluding framecomplete all as specifed and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar works etc ; not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floors & roofs etc n exc 20cm wide & sides of RCC/PCC bands in walls, horizontal or sloping, & similar work exc 10cm but exc 20cm wide complete all as specified and directed

M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking and binding with Mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per Item No 24 above but 6mm to 8mm dia ditto

M & L for RCC Type B0 1:2:4(12.5mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in lintel up to 1.5m clear span, cills, steps, bands, coping including weathering, slightly rounded or champhered, angle and throating as directed and other similar work all as specified including necessary form work complete all as specified and directed.

M&L for Broken glass coping on top of walls in cement mortar 1:3 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M & L Exterior wall tile joint free coloured tiles in vertical surfaces 7mm- 8 mm ,set and joiunted in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed in cement mortar 1:3 complete all as specified and directed.

Dismantling of stone slabs and tiles laid dry of any description or thickness in floor, aprons etc complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block, ruberised, glossy finish any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed.

M&L for sand under floor or paving laid in layers not exc 15cm thick, spread, levelled and rammed complete all as specified and directed.

M & L for coloured chequered tile glass moulded glossy finished of size 300x300x25mm thick set and jointed in neat cement slurry and pointed with mixture of white & gray cement in equal portion & no pigment over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for heavy duty exterior vitrified tiles of size 300 x300x10mm laid over 15 mm thick screed bed in CCM 1:6 jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile complete all as specified and directed

M&L 75 mm thick cement concrete type D2, 1:4:8 (40mm graded stone aggregate) as in sub-floors, sub-bases, etc.; all as specified

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in lintel up to 1.5m clear span, cills, steps, bands, coping including weathering, slightly rounded or champhered, angle and throating as directed and other similar work all as specified including necessary form work complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thick above or below ground level complete all as specified and directed

Supply and fix in replacement cast aluminium heavy pole designer leg and border designer base finished with polyurethene paint ( with prior treatments) diamtr of one leg is approx 76mm outer dia for spiogot entry 60mm oe nos "T" shaped bolts with nuts and washers provided for concrete foundation, total length of the pole incl base and legs ( basex03 Nos legs) is 2463 MM (aPPRX 8 FIT 1 INCH) WITH FULLY CAST ALUMINIUM FINISH POLYURETHANE PAINT( WITH PRIOR TREATMENTS) SQUARE JUNCTION WITH MAX PROJECTION BREADTH OF 625MM suitable for two no of post top lanterns with polyurethane ( with prior treatments) paint with arylic window cover total length 533mm and breadth 228mm B-22 brass provided with aluminium cover incl PCC 1:2:3 (SIZE 600X600X600MM) FOUNDATION, NUTS BOLTS INCL ALL ELECTRICAL CONNECTION complete all as specified and directed by Eng-in-charge.

Supply and fix in replacement Fully cast aluminium body finished with polyurethane paint (with prior treatments) with acrylic window of total length 533mm (21 inches) & max breadth 228mm (9 inches) ,spigot entry 62mm with 15W LED bulb INCL ALL ELECTRICAL CONNECTION complete all as specified and directed by Eng-in-charge.

Supply and fixing in replacemnt suspended linear fixture with 65mm widthx62mm heightx1158mm length 4' standalone LED channel CRCA powder coated housing with high efficicency polycarbonate/PS diifuser of min 2600 lm @ 23 watt ,115 lm/watt,CRI80, PF=0.95, sdcm=5, surge protection 4KV, ripple factor5% with accessories kit all as specified and directed by Eng-in-Charge.

Supply and fix in replacement 45W Pressure die cast aluminium housing street light with system lumen of 6300 lm and system efficacy of 140 lm/w, IP-66,IK-10 single piece die cast incl spigot, dia 48-76mm,LED lifetime (L70B50) 75k Hrs with integrated optical cover. Street light should have standalone lighting control system with AUTO ON/OFF based on DUSK/DAWN timings,preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, incleds dimming profile for energy savings,drift not exceedind max 2mins/year, clock retention upto five yeras, auto switching off secondary power for module,dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminiarie incl driver and astro module,surge protection as perIEC 61000-4-5 all as specified and directed by engineer in charge.

Supply and fixing in replacement of Solar integral AIO streetlight with Aluminium housing, reliable & robust construction with IP65 & IK08 protection. The luminare Lithium /LifePo4 Battery capacity min 20Ah@3.2V or 20w4.5v pv panel power CRI =70, System Efficacy 165lm/W, & Minimum Lumen 4000 system wattage should not be more than 25W ± 2%, if wattages increases then the size of battery & panel shall also be increased in similar percentage to maintain equal autonomy of the system. Weight not more than 2.32 kg . The fixture should have in microwave motion sensor &sensor dealy time 18 seconds Life class of LED 50000hrs@ .complete all as specified and directed by the Engr-in-Charge.

Supply and fixing in replacement of LED Strip light warm white colour incl 6 Nos of extra adapter complete all as specified and directed by the Engr-in-Charge

Supply and fixing of Solar integral AIO streetlight with Aluminium housing, reliable & robust construction with IP65 & IK08 protection, suitable for OD 50/60mm bracket, having Min 8500 system lumens, suitable for 24hrs (2 Nights) Autonomy.The luminaire should work on Hybrid mode with priority for solar,in case solar charging is not available then it should automatically switch to AC grid supply for reliable operation . Dimming pro􀅾le: First 1 hr - On motion: 100%, Without motion: 30%, next 3 hrs - On motion: 60%, Without motion: 20%, next 6 hrs - On motion: 30%, Without motion: 10%, Rest of the night: On motion: 50%, Without motion: 30%. Lithium Pherrophosphate Battery capacity min 30AH@12.8V or 384Wh & Battery Temp range -20-+60℃. Panel capacity min 75Wp, CRI =70, System Efficacy 180lm/W, & system wattage should not be more than 47W ± 1%, if wattages increases then the size of battery & panel shall also be increased in similar percentage to maintain equal autonomy of the system. Life class of LED System 50000hrs@L70. LED Make: CREE/ NICHIA/ LUMILEDS/ OSRAM. CE Certified, charger efficiency 90% and standards IEC62109-1, IEC61547, CISPR15, IEC62093, IEC61347-2-13, EN50530, IEC62384. The PV module should be made up of crystalline silicon solar cells "Mono-Crystalline" and must have a certificate of testing conforming to IEC 61215 Edition II / BIS 14286 & IEC 61730-1,2 IEC60598, Operating temp 0 Degree C to 50 Degree C, certifying above given parameters all reports shall be from In-house NABL or IECQ or any international accredited Laboratory.

Supply and fixing 1X9 Watt square shaped integral decorative LED (warm white)Bollard polycarbonate diffuser and IP 65 ,IK 07,Bigger dia of 76 mm 750mm height Housing AL PIPE SURGE PROTECTION 4KV protection and mounting of fitting with PCC foundation all as directed.Note: All civil work and earth work for fixing the pole is included in the item rate and NO EXTRA payment will be done to the contractor.

Supply and fixing 1X10 Watt square shaped integral decorative LED (warm white) ,body of stainless steel with CNC cutting of approved design AND COVERED WITH ACRLYIC sheet and UV-PROOF powder coating, glass diffuser, matt black Bollard light of height 800mm and 160mm width, 4KV protection and mounting of fitting with PCC foundation all as directed.Note: All civil work and earth work for fixing the pole is included in the item rate and NO EXTRA payment will be done to the contractor.

Supply and fix Solar- powered flame light 0.88W LED, 3000K large, new generation, energy saving, environmental friendly, long life aesthetically designed IP 65 & IK-07 protection, die-cast aluminium landscape luminaire with high power LED as light source all as per directed. Note: All civil work and earth work for fixing the pole is included in the item rate and NO EXTRA payment will be done to the contractor.

Supply and fixing of Solar integral AIO Post-top luminaire with solid polycarbonate housing, reliable &robust construction with IP65 protection, suitable for pole entry dia of 60mm, having Min 3000 system lumens, suitable for 12hrs (Dim mode) Autonomy. Lighting mode selectable for 2H/4H/6H along with the CCT 3000K/4000K/6500K by remote. Lithium Pherrophosphate Battery capacity min 14.4Ah@3.2V. Panel capacity min 13Wp, CRI =70, System Efficacy 165Lm/W & system wattage should not be more than 18W ± 2%, if wattages increases then the size of battery & panel shall also be increased in similar percentage to maintain equal autonomy of the system. Microwave Motion Sensor 5.8GHz, =25mW. Life class of LED System 25000hrs@L70. LED Make: CREE/ NICHIA/ LUMILEDS/ OSRAM. CE Certified, charger efficiency 90%. The PV module should be made up of crystalline silicon solar cells "Mono-Crystalline" and must have a certificate of testing conforming to IEC 61215 Edition II / BIS 14286 & IEC 61730-1,2 IEC60598, Operating temp 0℃ to 55℃, certifying above given parameters all reports shall be from In-house NABL or IECQ or any international accredited Laboratory. all as specified and directed by engineer in charge.

S & F in replacement street light GI bracket of 1.2 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of flat iron 40 x 6mm with nuts bolts & washers for fixing on wall complete necessary fixing arrangements on pole incl taking out old U/S bracket as directed.

Supply and fix in replacement of integrated SOLAR LED Wall light 3W , SYSTEM EFFICACY, 100 lm/wat , lumen output of 300, cri.70 6500K with IP 54 ,on board mode switch comprises of polycarbonate cover, etc complete all as specified and directed.

Supply and fix in replacement of integrated SOLAR up and down LED Wall light 3W , inbuilt panel battery,100 lumen ,3000 CCT, 3 TO 4 HOURS BACKUP ,IP-54 ,on board mode switch comprises of polycarbonate cover, etc complete all as specified and directed.

Supply and fix in replacement LED tube light fittings 1200 mm, 20 W (Warm white) higher energy saving decorative ultra slim square profile LED lighting fixture with extruded without powder coating enviromental friendly, energy efficient complete all as specified and directed.

Supply and fix in replacement LED tube light fittings 600 mm,10/12W higher energy saving decorative ultra slim square profile LED lighting fixture enviromental friendly, energy efficient complete all as specified and directed.

Supply, install, test and commissioning in replacement factory made THERMOPLASTIC/HDPE CABLE JUNCTION BOXES IP 66/67 “weather proof”, with terminals for outdoor installation (with knockouts for cable entry) of min size 205 x 255 x 112 mm depth with cable entry size of 10-25 sqmm with terminal incl Aluminium bus bar of 63amp----04 Nos and MCB SP 6amp-----01 No. complete fixed on wall all as specified and directed.

Supply and fixing recess mounting LED light fitting 2'x2' luminaire architectural recessed luminaire with CRCA housing and Molded PC diffuser with an unique angular optics for making the illumination easy on eyes for light comfort in office areas with UGR=19. The luminaire should have a color consistency SDCM 5, CRI 80 and choice of CCT: 5700K. Luminaire shall be designed to emit at least 3000 lumens and an efficacy of atleast 120Lm/W and maximum system wattage of 36 Watt, designed for ambient temp 45 deg C. The metallic electronic driver shall have a power factor 0.95, THD 10%, 4KV internal surge protection and the Ripple factor should be 5% to minimise the Flicker and Stroboscopic effect and Fixture should have an operating voltage range of 140-270VAC incl all as specified and directed by engineer in charge.

Supply and fixing Sensor based recess mounting LED light fitting 2'x2' luminaire architectural recessed luminaire with CRCA housing and Molded PC diffuser with an unique angular optics for making the illumination easy on eyes for light comfort in office areas with UGR=19. The luminaire should have a color consistency SDCM 5, CRI 80 and choice of CCT: 5700K. Luminaire shall be designed to emit at least 3000 lumens and an efficacy of atleast 120Lm/W and maximum system wattage of 36 Watt, designed for ambient temp 45 deg C. The metallic electronic driver shall have a power factor 0.95, THD 10%, 4KV internal surge protection and the Ripple factor should be 5% to minimise the Flicker and Stroboscopic effect and Fixture should have an operating voltage range of 140-270VAC incl It should have over voltage protection @320V Cut-off with auto restart features. complete all as specified.

S & F in replacement Al cable 2 core armoured cable 6sqmm armoured cable complete all as specified and directed.

S & F in replacement Al cable 2 core armoured cable 10sqmm armoured cable complete all as specified and directed.

M &L for Excavation in trenches not exc 1.5 m wide and not exc 1.5m deep for laying of pipe, cable etc and getting out in soft/loose complete all as specified and directed.

M&L for Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and directed.

M &L for Removing surplus excavated material to a distance not exc 50 meter and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.

M&L for sand cushioning for protection of cables complete all as specified and directed.

Supplying & laying common bricks sub class B for LT cable for protection of cable complete all as specified and directed.

S & F in replacement Al cable 2 core cable 4 sqmm service cable complete all as specified and directed.

S & F in replacement Al cable 2 core cable 6 sqmm service cable complete all as specified and directed.