Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date1 Feb 2024
Closing DateCancelled
Tender Amount₹ 47,33,000
Costs
EMD
₹ 94,660Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_640050_1Tender No
9134/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed
42
-
-
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
338
-
-
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as sspecified and as directed .
180
-
-
Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point in soft / soil complete all as specified and directed .
155
-
-
M&L for PCC (1:4:8) Type D-2 using( 40mm graded stone aggregate ) as in foundations, filling and mass-concrete compete all as specified and directed.
5.43
-
-
M&L Brick work with subclass 'B' bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed
11.92
-
-
M&L for brick work with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls, built CM in 1:4 complete all as specified and directed.
39
-
-
M&L for RCC Nominal mix type B1 (1:2:4) using (20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, lintel band etc basement slabs, under- reamed piles and mass concrete complete all as specified and directed.
7.27
-
-
M&L for RCC Nominal mix type B1 (1:2:4) using (20 mm graded stone aggregate) as in columns complete all as specified and directed.
4.15
-
-
M&L for RCC Nominal mix type B1 (1:2:4) using (20 mm graded stone aggregate) as in chhajja complete all as specified and directed.
0.28
-
-
M&L for RCC Nominal mix type B1 (1:2:4) using (20 mm graded stone aggregate) as in lintel over 1.5m span complete all as specified and directed.
0.73
-
-
M&L for RCC Nominal mix type B-1 (1:2:4) using (20 mm graded stone aggregate ) as in Slabs supported on walls, beams and columns in floors, roofs beam, landings, balconies, canopies, deck slabs and in the shelves etc complete all as specified and directed.
5.85
-
-
M&L for RCC Nominal mix Type ype B0, 1:2:4 (12.5mm graded aggregate) as in Beams, cantilevers, bressumm ers, lintels over 1.5m span . Complete all as specified and directed.
3
-
-
Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed
46
-
-
Formwork to flats rough finish surface of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, lintel band and similar work; vertical or to batter complete all as specified and directed.
30.7
-
-
Formwork to flat rough finish surface of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed
69
-
-
Formwork to flat rough finish surface soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed
31.15
-
-
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finish surfaces complete all as specified and directed
72.35
-
-
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.
2136
-
-
Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. Complete all as specified and directed.
445
-
-
M&L Rendering 15 mm thick in CM 1:4 on fair faces of brick or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions (WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified and directed.
210
-
-
Supply only integral liquid water proofing compound complete all as specified and directed. Make :- Dr Fixit Pidiproof LW+ or equivalent in specified make
6.5
-
-
M&L Rendering 10 mm thick in CM 1:6 on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
120
-
-
M&L 5 mm thick rendering on concrete surfaces such as sides of roof beams, soffits of roof slab (ceiling )etc in CM 1:3, finished fair & smooth without using extra cement all as specified and directed .
33
-
-
M&L for 10mm thick rendering on fair faces of brick work or on concrete surface in CM 1:3 finished surface even and smooth without using extra cement, mixed with liquid water proofing compound @ 100 ml per 50 Kg of cement bag complete all as specified and asdirected. Note : WPC will be measured and paid separateiy.
132.7
-
-
M&L for roof treatment for in accessible / accessible roof including cleaning the the roof surface and applying bituminous primer @ 0.20 kg per sqm , providing and laying 4 mm thick APP water modified water proofing membrane not less than 4 kg per sqm reinforced with non woven polyster mat weighing not less than 800 N per sqcm trearing not of 180 N (by torch application method) with minimum of 10 cm side laps and 15 cm end laps by application of torch applying a coat of blown grade hot bitumen 90/15 grade over the membrane @ 1.20 kg /per sqm complete all as specified and directed
37.7
-
-
M&L for two coats of oil bound distember on walls surfaces over a coat of primar over 2 mm thick wall care putty after complete all as specified and directed.
256
-
-
M&L for three coats of white wash on ceiling surfaces complete all as specified and directed.
33
-
-
M&L for preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
206
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
104
-
-
M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed
2.7
-
-
M&L for Hardcore of broken bricks guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed
60.25
-
-
M&L for 100 mm thick cement concrete Type B-2 (1:2:4) using( 40mm graded stone aggregate ) as in sub base of floor compete all as specified and directed.
48.25
-
-
M&L for 25 mm thick cement concrete type B0 (1:2:4) using 12.5 mm stone aggregate as in sub base of floor tile all as specified and directed by Eng-in-Charge.
18.25
-
-
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed
121
-
-
M&L for rendering 10mm thick in CM 1:3 CM for dado / skirting on brick work finished fair and smooth for receiving tiles in vertical surfaces all as specified and directed
83
-
-
M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) et complete all as specified and as specified and directed
3
-
-
M&L for glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed
83
-
-
M&L 15 mm thick screed bed or bedding layer of mortar in CM 1:4 for laying floor finishes neat cement slurry with 3.00 kg of cement per sqm complete all as specified and directedby.
45
-
-
M&L for vitrified ceramic colours tiles 10 mm thick in light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
45
-
-
M&L for vitrified ceramic colours tiles 10 mm thick in light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
3.3
-
-
M&L Machine cut kota stone slab flooring 20-25mm thick over 1:6 cement screed 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (joint thickness not to exceed 1mm)
5.25
-
-
M&L Kota stone slab 20-25mm thick in, skirting laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete
1
-
-
M&L for cement concrete type C-2, 1:3:6, 75 mm thick (40mm graded aggregate) as in plinth prtection complete all as specified and as directed
10.25
-
-
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth
2.75
-
-
S&F steel water tubing 15mm bore medium grade galvanised with all fittings such as bends, tees, nipples, elbows, reducers, etc fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
9
-
-
S&F steel water tubing 20 mm bore medium grade galvanised with all fittings such as bends, tees, nipples, elbows, reducers, etc fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
12.4
-
-
S&F CP Grating 150 mm size complete all as specified and directed.
2
-
-
S&F PVC (SWR) P/S trap 125/110 mm,setting and jointing with solven tcement
1
-
-
M&L 75mm dia PVC (SWR) floor trap, plane with grating including jointing with solvent cement.
3
-
-
S&F Vitreous china squatting plate urinal, white (excluding flushing cistern, flush pipe and waste pipe)
1
-
-
S&F vitreous china wash down water closet pan (pedestal pattern with including trap, seat cover, including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floor complete all as specified and directed.
1
-
-
S&F Vitreous China wash basin white, flat back, including brackets size 550x400 mm complete all as specified and directed.
1
-
-
S&F 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
1
-
-
S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.
1
-
-
S&F PVC waste pipe 32mm dia, 60 cm long for WHB/Urinal with long screw shanks and fly nuts, flanges end bedded in red lead cement and other fixed complete.
2
-
-
S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
1
-
-
S&F 15mm bore bib taps, cast cpper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe fixed in repairs all as specified and directed . Make - Essco or equivalent
1
-
-
S&F brass chromium,Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
1
-
-
S&F 15mm, Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
1
-
-
S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
1
-
-
S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
1
-
-
S&F 15mm, Stop valves, angle cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
3
-
-
PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
3
-
-
S&F three layered Rotational moulded polyethylene 500 Ltr water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in white colour complete all as specified and directed.
1
-
-
M&L for cement concrete Type B-1, 1:2:4 (20mm graded stone aggregate) in roof for base of water storage tank complete all as specified and directed.
0.05
-
-
S&F soap dish, vitreous china white, approximate size 160X160X90 fixed to plugs with chromium plated brass screws complete all as specified and directed.
1
-
-
S&F in 20mm PVC Nipple suitable for HDPE Water tank (Min Wt 15mm-38gms) complete all as specified and directed.
1
-
-
S&F in 15mm PVC Nipple suitable for HDPE Water tank (Min Wt 15mm-38gms) complete all as specified and directed.
1
-
-
S & F ball brass valves high pressure with polyethylene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to 20 mm bore , complete all as specified and as directed.
1
-
-
M&L for 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
10
-
-
S&F PVC (SWR) bends any radius for 110 mm bore provided with access door, complete all as specified and directyed at site.
2
-
-
S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia, complete all as specified and directyed at site.
1
-
-
S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
8
-
-
S&F 75mm PVC (SWR) bends anyradius, complete all as specified and directyed at site.
3
-
-
S&F PVC (SWR) junction single, (single T) equal or unequal of 75 mm dia, complete all as specified and directyed at site.
2
-
-
Cutting into existing manholes for connecting new drains, making good to pipe 110mm dia and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm crushed stone aggregate ) surface smooth finished and reforming benching as required for internal dia of pipe 100mm complete all as specified and as directed.
1
-
-
Taking down chowkhats and frame but n.exc 1.5 Sqm each with shutters without taking off shutters from the frames, area n.exc 1.50 sqm each and removal to store including cutting holes for removal of hold fast complete all as specified.
4
-
-
Taking down chowkhats and frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters without taking off shutters from the frames, area n.exc 1.50 sqm each and removal to store including cutting holes for removal of hold fast complete all as specified.
2
-
-
S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
46
-
-
S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
9.1
-
-
S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
3.6
-
-
S&F Door closer hydraulically regulated, (Aluminium extruded section body) designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
5
-
-
S&F 5 mm thick sheet glass, selected quality for opening exc 0.5 sq m in each pane complete all as specified and directed
11.25
-
-
Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [ Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) Area not exceeding 2.00 sqm each
3
-
-
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded
2.4
-
-
S&F 5mm figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane
1
-
-
S&F 4.8mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
1
-
-
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
4.8
-
-
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
1.6
-
-
S&F Pressed steel frame size 105X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.omplete all as specified and directed
5
-
-
M&L Flush shutters, 30mm solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed
2
-
-
Preparing new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer of any description exc 10 cm width or girth complete all as specified
5
-
-
M&L PCC (1:3:6) type C1 as holdfast block, door frame filing, coping, bedblock etc complete all as specified and directed
0.5
-
-
S&F for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed
1
-
-
S&F 150mm, aluminium anodised, barrel tower bolts of extruded section and fix complete all as specified and directed.
3
-
-
S&F 150 mm Aluminium handles , cast type, anodisedetc.complete all as specified and directed.
4
-
-
S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed
114
-
-
M&L for preparation of previously untreated steel and iron surfaces of any description not otherwise described over 10 cm in width or girth and appiying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
38
-
-
M & L for providing reinforced concrete (1:2:4), type B-1, (using 20mm graded stone aggregate) as in drain cover set in cm (1:4) complete all as specified & directed.
1
-
-
PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate ) in benching and the like including weathering,slightly rounded or chamfered angles and throating as directed and necessary formwork complete all as specified and as directed .
0.12
-
-
M&L PCC 1:3:6 type C-2 ( using 40mm graded aggregate ) surface channel and drains , complete all as specified .
0.29
-
-
M & L for rendering 15mm thick in cm 1:4 on brick work/concrete surface, finished event smooth with using extra cement complete all as specified.
12.75
-
-
S&F plain mild steel wire, in fencing including straining and fixing to wood, concrete or steel posts , angle iron and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured)
1
-
-
Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
1.6
-
-
M&L 75 mm PCC (1:2:4 ) type B2 using 40 mm graded aggregate as in floors,hard standing, sub base floor finished the surface even and smooth without using extra cement and spike rolling to surface or making impressions of expanded metal whilst the concrete is green..
25
-
-
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar
0.3
-
-
M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete
3
-
-
M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed
30
-
-
S&F steel almirah on wall with 4 Nos 10 mm dia 100 mm long fasteners all as specified and directed almirah shall be of size 760 mm long, 440 mm wide and 900 mm high made of 1 mm thick mild steel sheet, Front shutter shall have two levees. A steel chromium plated handle shall be provided to the shutter.Handle shall be 100 mm long.A three way locking device shall be provided to front shutters.Each leave of front shutter shall be hinged with two numbers butt hinges 15 mm long and shutters shall be side hung, specification all as per FD 1032. and as per sample kept in AGE (AF) Varanasi. Fixing shall be done as directed by engineer-in-charge with standard workmanship. All steel surfaces shall be spray painted with standard workmanship. All steel surfacs shall be spray painted with two coats of synthetic enamei paint over one coat of primer after preparation of steel surfaces complete all as specified and directed.
6
-
-
S&F in repairs Stainless steel wirecloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.
30
-
-
Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50
0.1
-
-
S&F 18 mm thick HDMR (High density high moisture resistance) board of grade 1 quality make: Green ply, Action Tesa or other make as approved by GE of one side prelem and other side to suitable for high gloss finish mica of approved quality make :- Century or as approved by GE Fixed with screws, solvent cement/adhesive to make cupboard shutters, sides, top and bottom, shelves inside the cabinet and shutter or drawer including taking down of old shutters, sides top bottom. complete all as specified and directed.
49
-
-
S&F 75 mm size L/Z type stainless hinges fixed screws openable at 110 degree for cabinet shutter Make:- KAFF complete all as specified and directed.
80
-
-
S&F SS Designer Thali/Plate Comb of size 380x400x200mm make of Sleek (code-ASSTT380405200) or equivalent complete all as specified and directed.
2
-
-
S&F SS Designer Cup and Saucer basket of size 380x400x100mm make of Sleek (code-ASSTT380405100) or equivalent complete all as specified and directed.
2
-
-
S&F SS Perforated Curtlery basket of size 380x500x100mm make of Sleek (code-ASSTT380500100) or equivalent complete all as specified and directed.
2
-
-
S&F SS designer Basket of size 380x400x200mm make of Sleek (code-ASSTT380500100) or equivalent including dismantling of old basket .complete all as specified and directed.
10
-
-
S&F SS Grain Basket Trolley with bracket of size 360x505x230mm make of Sleek (code-ASSGBT360505230) or equivalent including dismantling of old basket complete all as specified and directed.
10
-
-
S&F SS dustbin-14 Ltr code-IHISG 2154, make of Sleek or equivalent as approved by GE. complete all as specified and directed.
2
-
-
S&F stainless steel handles of 150 mm size for kitchen cabinet shutter/drawer complete all as specified and directed.
67
-
-
S&F CP SS telescopic channel 20'' long, zink (35Kg) make- Sleek (Asian paint) code-HICH-1356) or equivalent dismantling of old telescopic channel .complete all as specified and directed.
52
-
-
S&F steel work in tubular Post/ trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St-240 including all necessary work as directed by Engr in Charge. Complete all as specified and directed.
1610
-
-
S&F pre-painted galvalume aluminium zinc coating GI based corrugated, steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
142
-
-
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any Green having tensile strength of 550 Mpa as in roof covering/cladding/drain to wall, fixed with self tapping screws as specified.
4
-
-
S&F steel windows or ventilators,Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.Complete all as specified and directed.
8
-
-
S&F figured glass,4mm thick, pin head type and glazing with oil putty in squares exc 0.5 sq. m in each
pane. Complete all as specified and directed.
7
-
-
S&F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete: gear operated type with bevel gear box and crank handle. Complete all as specified and directed.
7.5
-
-
M&L for moorum/red bajri filling in floors or pavings, laid in layers n.exc .15cm thick, spread, levelled and rammed including watering. Complete all as specified and directed.
6
-
-
M&L for cement concrete 75mm thick, Type D2, 1:4:8, 40 mm graded aggregate as in sub base of floor. Complete all as specified and directed.
35
-
-
M&L for cement concrete 40mm thick,Type B1, 1:2:4, 20 mm graded aggregate as in floor finishes.Complete all as specified and directed.
35
-
-
M&L for cement concrete 75mm thick, type C2, 1:3:6 (20 mm graded aggregate) as in plinth protection.Complete all as specified and directed.
20
-
-
Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' .Complete all as specified and directed.
0.8
-
-
Providing precast cement concrete louvres and jallies,Type B0, 12.5mm graded aggregate set in cement mortar 1:4, 25mm thick (measured solid), including all mouldings but excluding frame. Complete all as specified and directed.
24
-
-
Surface dressing n exc. 15 cm deep in soft/loose soil. Complete all as specified and dircted.
20
-
-
M&L for Cement concrete Type B1, 1:2:4, 40 mm graded in foundations, filling and mass concrete.Complete all as specified and directed.
0.22
-
-
M & L for power/sub main wiring with two runs of single core 2.5 sqmm size and one run of single core 1.5 sqmm (green colour as earth continuty conductor ) PVC insulated unsheathed multi stranded copper conductor cables drawn through and including PVC casing caping complete all as specified and directed.( Note - Two runs of 2.5 sq mm single core copper conductor and one runs of 1.5 Sq mm copper conductor shall be measured as one unit length.)
250
-
-
M&L light fan point controlled by one switch with PVC insulated, unsheathed , multi stranded, single core copper conductor FRLS ( Flame Retardant Low Smoke) cable 1.50 Sqmm suitable for fixing in concealed PVC conduit of size not less than 20 mm dia with metal flush boxes including white cover plate with frame of required module.Metal flush box should not less than 2 mm thick duly painted inside and outside with two coats of synthetic enamel paint over one coat of red oxide primer of required module suitable for housing modular switches, socket, fan regulator etc. PVC insulated, unsheathed, multi stranded, single core copper conductor FRLS cable 1.50 Sqmm used as earth wire to commen earth and connected to common dolly drawn in same conduit all as specified.
16
-
-
Supply & Fixing switch modular single pole, one way 6 Amp ,01 module, complete all as specified and directyed at site.
16
-
-
Supply & Fixing ceiling rose surface backlite 65X20 mm two to three terminals complete, complete all as specified and directyed at site.
16
-
-
Supply, fabricate, erect, testing and commissioning LT outdoor feeder pillar box 500x500x200mm totally enclosed weather and vermin proof, suitably ventilated, 440 Volts, 50HZ,AC supply, factory made, fully compartmentalized made out of 3.15 mm thick CRCA sheet for load bearing and 2.00 mm thick non load bearing portions, protection of enclosure IP-54 as per IS-2147 of 1962 complete with pre-treatment with approved colour including suitable angle iron/flat iron frame work/supports, danger notice board, excavation and earth work, PCC foundation etc, out door type, cubical type as required with and including the following, supplied fitted and connected internally and connected to existing earthing complete all as specified and directed. (a) Incoming:-
(i) MCB SPN 40 to 63 Amps 240 volts, 10 KA, "C" curve. -01 No (ii) 4 Nos bus bar of equal size of aluminium conductor with PVC coloured heat shrinkable type sleeves continuous rating 100 Amps mounted on non resin type insulators with CTs digital type ammeter 0-100 Amp-01 Nos and volt meter 0-500 Volts with selector switches , set of LED type indicating lamps R,Y,B. (b) Outgoing:-
(i) MCB SP 5 to 32 Amps 240 volts, 10 KA, "C" curve. -6 Nos.
(ii) Socket outlet 3/6 pin, 6/16 Amps outlet each controlled by MCB SP 16 Amps individually -02 Nos.
3
-
-
Supply and fix LED Flood light 60 W IP 66 ( LED efficacy not less than 130 lumen/watt) including necessary electric connection with twin core twisted flexible copper conductor cable of suitable size .Make Philips/Bajaj/Havells/Wipro/ HPL.
40
-
-
Supply and laying ,jointing and testing XLPE insulated extruded PVC outer sheath and inner sheath galvanized steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade conforming to IS 7089 (Pt I of 1988) laid in tranches/ pipe/duct/pole complete all as specified and directed size 10 Sqmm 2 core, complete all as specified and directyed at site.
60
-
-
Taking down the existing defective LT UG cable from trenches / pipes / pole for fault finding / replacement, all as specified and directed of any size between 10 Sq mm 4 Core, complete all as specified and directyed at site. ( Note-Excavation and earth work will be measured and paid seperately under relevant item. )
200
-
-
All as per item No. 147 above but size 120 Sqmm 3.5 core to 240 Sq mm 3.5 core, complete all as specified and directyed at site.
1350
-
-
Supply and laying ,jointing and testing XLPE insulated extruded PVC outer sheath and inner sheath galvanized steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade conforming to IS 7089 (Pt I of 1988) laid in tranches/ pipe/duct/pole complete all as specified and directed size 10 Sqmm 4 core.
200
-
-
All as per item No 149 above but size 120 Sqmm 3.5 core, complete all as specified and directyed at site.
250
-
-
All as per item No 149 above but size 150 Sqmm 3.5 core, complete all as specified and directyed at site.
550
-
-
All as per item No 149 above but size 240 Sqmm 3.5 core, complete all as specified and directyed at site.
550
-
-
Supply & laying sand cushioning for cable protection in trenches 8 cm before laying cable and 15 cm thick over the cable complete all as specified and ditected.
93
-
-
Supply & laying brick for protection of cable sub class 'B' laid dry flat across the cable with width equal to the length of whole bricks complete all as specified and ditected.
9
-
-
Material and Labour for boring, holes for inserting of 40/50/80 mm bore GI pope under the road/hard standing or any other location not less than 1200 mm deep complete all as specified and ditected.
120
-
-
M & L GI pipe 40 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.
48
-
-
M & L GI pipe 50 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.
30
-
-
M & L GI pipe 80 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.
66
-
-
Taking down existing old defective LT Panel / FP Box by disconnectiing its all elecetrical connections and by dismentelling foundation complete all as specified and directed at site by Engr-in-Charge.
5
-
-
Supply, install, connect & testing cubical outdoor type factory made double door , powder coated LT bus bar feeder pillar box having alluminium bus bar suitable for 200 amps 3 phase and neutral arrangement of size 500mm x 500mm x 200mm with MCCB 4 pole 100 A as incoming including provision of LED Indicating lamps (RYB) 01 set of 3. complete weather proof and vermin proof conforming to IP-54 made out of 3.15 mm thick CRCA sheet including provisions for ventilation and cable termination alley & two Nos suitable size of aluminum strip for body earthing all as per IS. It should be mounted on 40 x40 x 6mm angle frame with a clearance of at least 0.45 mtrs above GL and 0.30 mtrs below ground including required PCC for foundation complete all as specified and directed.
2
-
-
Supplying,installation,testing,commissioning of LT panel board 3 phase 4 wire system indoor type factory made free standing floor mounting with suitable clamp dust and vermin proof cubical type interlocking arangement ( IP- 55 protection) fabricated with 2 mm thick CRCA sheet with Anti corrosion coating & finally polyester powder coated of finite green fuly compartment with providing with suitable size of aluminum strip all as specified for the following. (a) Incomming :- (i) Incoming ACB with Microprocessor Release IPR E of 800 Amps, 4 Pole, 415 Volt with repturing capacity of 50 KA - 1 No. (ii) Digital type Amp Meter 0-800 Amp with CT's 03 Nos. (iii) Digital type voltmeter 0-500 Volts -01 No. (iv) Indicating lamps (RYB) 01 set of 3. (v) Copper bus bar rating 1200 Amps 3 phase neutral-01 set. (vi) Chamber for incoming & outgoing cable. (b) Outgoing :- (i) MCCB 400 AMPS 4 pole 415 Vollts 36 KA -01 No. (ii) MCCB 250 AMPS 4 pole 415 Vollts 36 KA -02 No. (iii) MCCB 200 AMPS 4 pole 415 Vollts 36 KA -03 No.
1
-
-
Supplying,installation,testing,commissioning of outdoor type LT panel board 3 phase 4 wire system ,415 Volts ,50 Hz factory made free standing , floor mounting dust and vermin proof cubical type interlocking arangement (IP- 55 protection) fabricated with 3.16 mm CRCA sheet with Anti corrosion coating & finally powder coate painting having thickness not less than 100 micronsof finite grey, fully compartmentalized with providing two Nos suitable size of aluminum strip for body earthing and including suitable PCC foundation all as specified for the following :- (a) Incomming :- (ii) MCCB 125 AMPS 4 pole 415 Vollts 36 KA -01 No. (iii) Digital type amp meter 0-200 Amp with CT's 03 Nos. (iv) Digital type voltmeter 0-500 Volts -01 No. (v) Indicating lamps (RYB) 01 set of 3. (vi) Aluminium bus bar rating 200 Amps 3 phase neutral-01 set (vii) Chamber for incoming & outgoing cable. (b) Outgoing :- (i) MCCB 100 AMPS 25 KA 415 Volts 4 pole -1 No. (ii) MCCB 63 AMPS 16 KA 415 Volts 4 pole -02 No. (iii) MCB TPN 32 AMPS C curve 415 Volts -01 No. (iv) Din rail multifunction digital timer switch Make GIC model 67DDTO -01 Nos. (v) Power contactor 4 pole 40 amps Make L & T Cat No. MCX 12 model No CS97014-01 Nos.
2
-
-
M&L earthing complete with galvanised steel earth plate 600X600X6.3 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.5 m below GL) connected with GI earth strip of 32X6 mm as earthing leads by means of bolts, nuts, check nuts and washers beside Welding / brazing at all joints as shown on drawings and including excavation, earth work. GI pipe light grade 40 mm bore for protection of GI earth strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed.
16
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements