Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Building Construction
Eprocure
Opening Date7 Nov 2024
Closing Soon5 Dec 2024
Tender Amount₹ 1,14,00,000
Costs
EMD
₹ 2,28,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_682910_1Tender No
CWE/LKO/E/T-82 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.
1240
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
985
-
-
Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.
180
-
-
Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.
340
-
-
M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking and binding with Mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
8080
-
-
All as per Item No 8 above but 6mm to 8mm dia ditto
3900
-
-
M & L for brick work using old size fly ash brick, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed.
120
-
-
M&L for rendering 15 mm thick in cement mortar 1:4 on fair face of brick work of walls, mixed with water proofing compound (ISI marked) @ 200 ml per bag cement by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed. Note:- Supply only water proofing compound shall be measured and paid for separately.
450
-
-
M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete, all as specified.
80
-
-
M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectanglar) area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm as in floor over and including screed bed 15mm thick in CM 1:6 or beding layer for laying floor finishes etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete, all as specified and directed.
100
-
-
M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).
207.5
-
-
S&F PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete all as specified & directed.
60
-
-
S&F in repairs long body 15mm bore bib tap, fancy type, chromium plated, cast copper alloy, with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.
50
-
-
Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each, complete, all as specified & directed.
58
-
-
Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete, all as specified & directed.
63
-
-
S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates, hinges, hold fast etc, incl back filling with PCC 1:3:6 type C1 using 20 mm graded aggregates, complete all as spcefied and directed
115
-
-
S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, lock striking plates, hinges, hold fast etc, incl back filling with PCC 1:3:6 type C1 using 20 mm graded aggregates, complete all as spcefied and directed
102
-
-
S&F 32mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete, all as specified and directed.
85
-
-
S & F for 35mm thick factory made glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.
50
-
-
S&F for factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per pecifications & drawing.
18
-
-
S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified.
52
-
-
M&L for brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
30
-
-
M&L 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @ 3 % by weight of cement on other than fair faces of brick / stone masonary surfaces, finished even and smooth without using extra cement, complete all as specified and directed (WPC measured and paid separately)
1000
-
-
M&L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of brick work / stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed.
700
-
-
M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size exceeding 0.11 Sqm but not excceding 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed.
400
-
-
S&F in repair PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed.
10
-
-
S&F in repair angle valves 15mm bore , cast copper alloy chromium plated with long sunk and cap (Concealed type), screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.
65
-
-
M&L for Framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars ; barred iron doors ; ladders; framed balusters; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed.
800
-
-
S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new PVC clamps complete all as specified and directed.
80
-
-
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new PVC clamps complete all as specified and directed.
150
-
-
S&F 100mm butt hinges stainless steel with galvanised mild steel hinge pin anodised ISI marked and fixed, complete all as specified and directed.
144
-
-
S&F 15mm GI water tubing( Concealed type), medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.
175
-
-
S&F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.
355
-
-
S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.
25
-
-
S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.
25
-
-
S&F in repairs PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and directed.
36
-
-
M&L for preparation of new steel and iron surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
175
-
-
M&L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise descriped over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
270
-
-
S & F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed
7
-
-
Supply only integral waterproofing compound of approved make complete all as specified and directed.
50
-
-
S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples/ iron rivet and necessary welding including taking down from rivet, Nut & Bolt /welding complete all as specified and directed
170.4
-
-
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar works; not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed.
133
-
-
Returning filling in trenches including spreading leveling, watering and well ramming in layer not exc 25 cm thick complete all as specified and directed.
125
-
-
Removing excavated material (soils) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.
45
-
-
Item No. 48 to 110 for Job No. LSA/DWP/35/SRW/2024-25 M&L PCC 1:2:4, type B1 using 20 mm graded stone aggregate as in roof kerbs / benching / coving and roof padding over roof surfaces /sunken treatment etc rounded or chamfered on edges, complete all as specified and directed.
2.25
-
-
M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 mixed with water proofing compound (ISI marked) @ 200 ml per bag cement by weight of cement or as per manufacturer’s instructions, w/o using extra cement complete all as specified. Note :- Supply only water proofing compound shall be measured and paid for separately.
45
-
-
Providing and applying single component PU Magnum solvent base Pure polyurethane liquid membrane for the concrete roof surfaces in two coats @1.85kg/ sqm and mixing ratio of hardener and base is 95:05 and consisting of a coat of two component epoxy primer in ratio of 1:1 (one part of resin and one parts of hardner) at a consumption of 0.200kg/sqm The vital physical and chemical parameters shall be as under : Min Elongation at break of 500% as per ASTM D2370 and tensile strength of 3.0 N/mm2 as per ASTM D2370, Crack Bridging ability greater than 3mm as per C1305 ,Water Impermeability on coated concrete @7 bar as per DIN1048,Water vapor permeability 0.72 perms as EN ISO 7783-2 . The material shall be applied with brush and it should be tested according to EN 1504-2 as a coating for surface protection for concrete, complete in all respect as per the direction of Engineer-in-charge.
45
-
-
Complete removal of existing treatment from wall applying two coats of oil bond distemper over a coat of primer over a coat of wall care putty (2 mm thick) to make surface even and smooth, and complete all as specified and directed.
1470
-
-
M&L for complete removal of exisiting finish/newly plastered surface (with mechanical sander machine) on walls and applying plaster of paris putty of min 1 mm thickness to prepare the surface even and smooth and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as speciifed. Note:- Paint to be applied with airless spray machine .
600
-
-
M&L for complete removal of existing treatment and applying three coats of of white wash on ceilling complete all as specified and directed.
400
-
-
M&L for complete removal of existing treatment and applying three coats of of white wash on walls complete all as specified and directed.
150
-
-
M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying two coats of synthetic enamel paint, complete, all as specified and as directed.
50
-
-
M&L for vitrified ceramic tiles 10mm thick (square/rectangular), light coloured (shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and directed.
485
-
-
All as per description of serial item No 56 above but on vertical surface over & including 10mm thick screed bed in cement & sand mortar 1:4, complete all as specified and directed.
50
-
-
M&L for 18-20 mm thick granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills, cooking platforms & like, over 15mm thick screed bed in cement mortar (1:6) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite and rounding the edges and making holes for gas pipe as required , after dismantling of old granite complete all as specified and directed.
20
-
-
Forming construction joints 30 mm deep x 10mm wide filled with sealing compound grade "A."
2
-
-
M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate complete all as specified
50
-
-
M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls.
150
-
-
S&F in repair viterous china wash down water closet pan (Pedestal pattern) with 'P' or 'S' trap including connection to trap, flushing pipe, anti syphonage pipe and cistern and S& F WC seat cover closed pattern with flat bottom and cover with mild steel chromium plated or aluminised hinging device and finally making good disturbed surface of floor complete all as specified and directed.
8
-
-
S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified.
8
-
-
S&F in repairs vitreous china wash hand basin, white, flat back of size 630mm x 450mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified.
2
-
-
S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including 40mm bore PVC waste fitting suitable for sink with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink.
4
-
-
S & F for stainless steel kitchen plate rack of overall size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.63 mm thick fixed with rawl plug and CP steel screws complete, all as specified and directed. Make : Blue Star (Silver Shine), Diamond, Nirali, Prayag.
4
-
-
S&F in repair 15mm bore fancy type two way CP Brass Bib taps with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .
8
-
-
S&F in repair chromium plated brass single hole basin mixer with hot and cold arrangement with long shank and cup suitable for 15mm bore pipe complete, all as specified & directed.
8
-
-
S&F in repair chromium plated brass wall mixer 2 in 1 (L-bend type) with hot and cold arrangement with cups suitable for 15mm bore pipe complete, all as specified & directed.
8
-
-
S & F for 5 mm thick glass Corner shelf 300mm with chromium plated guard, fixed with brass screws and wooden/plastic cleats complete all as specified and directed.
8
-
-
S&F in repair sheet glass shelf assemble consisting of 5.5 thick sheet glass shelf 12cm wide with CP bracket gaurd & railing 60cm long all as specified and directed.
8
-
-
S&F in repairs CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified.
8
-
-
S&F in repair CP brass health faucet not exc 1.25 m long flexible tube including wall hook complete all as specified and directed.
8
-
-
S&F in repair toilet paper holder, brass chromium plated fixed to walls with chromium plated (CP) brass screws complete, all as specified & directed.
8
-
-
S&F in repair PVC cabinet mirror bathroom box type complete all as specified and directed.
8
-
-
S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified.
8
-
-
S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks, triple layered (cylindrical, vertical with closed top) hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe incl 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete after dismantling old RCC/PVC tank, all as specified and directed.
4
-
-
S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks, triple layered (cylindrical, vertical with closed top) hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe incl 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete after dismantling old RCC/PVC tank, all as specified and directed.
4
-
-
S&F in repairs 20 mm bore gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed, all as specified.
16
-
-
S&F in repairs 22-25 mm dia stainless steel curtain rod including brackets and fancy type finials, complete, all as specified and directed.
200
-
-
Taking down eaves gutters and rain water pipes ( any size or pattern) incl all fittings , shoes, bends, swan neck etc. and removal to store
197
-
-
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.
47
-
-
S&F 75 mm PVC (SWR) floor trap, plain with CP grating, with or without hole including jointing with solvent cement
16
-
-
S&F 110mm bore PVC (SWR) bend, any radius, complete all as specified and directed.
15
-
-
S&F 75mm bore PVC (SWR) bend, any radius, complete all as specified and directed.
15
-
-
S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal
4
-
-
S&F 110mm bore PVC (SWR) junction single (Single T) equal or unequal
8
-
-
S&F 75mm PVC (SWR) branch piece, single (single Y) equal or unequal
4
-
-
S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal
4
-
-
S&F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed.
8
-
-
S&F PVC cabinet shutter as in Kitchen, Cup board, wardrobe etc with frame of min size 60mm x 44mm including shelves in required sizes at site made out of 18 mm thick one side decorative lamination & other side balancing lamination sheet & provision of shutter made out of 18 mm thick one side decorative laminated PVC sheet all required brackets stainless steel screw etc the panels shell be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bend finish including all necessary fitting as per site requirement and as per make and specification mentioned complete all as specified and directed. Note:- Density of PVC solid sheet should not be less than 575 kg/M3.
80
-
-
S&F magnet ball catcher for cup board shutters, complete all as spcefied and directed.
125
-
-
S&F 100mm size stainless steel fancy type handle, complete all as specified and directed.
80
-
-
S&F 150mm size stainless steel fancy type handle, complete all as specified and directed.
88
-
-
S & F for 100 mm long Hasp & staple, safety type, Stainless steel with mild steel hinges pin including bolt to hinges plate & fixed with screw, complete all as specified and directed.
16
-
-
S&F auto concealed hinges SS size 103mmx64mmx28mm suitable for cabinet and wardrobe complete all as specified and directed.
150
-
-
S&F PVC solid door frame of size 50x47mm made out of 5m plain coloured sheet reinforced with MS square tube complete all as specified and directed.
40
-
-
S&F 200 mm long stainless steel tower bolts of extruded section (ISI marked) complete all as specified
88
-
-
S&F 100mm double legged door stopper of stainless steel with rubber base all as specified and directed by Engr-in-charge.
24
-
-
S&F 300 mm long stainless steel sliding door bolts, fancy type, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete, all as specified.
24
-
-
S&F in motice locks of brass, 4 lever, 100 mm size, vertical type complete all as specified and as directed.
4
-
-
S&F powder coated(min thickness of powder coating 50 micron) anodised aluminum window shutter three track sliding type, section having frame size bottom with outer 92x45.5x1.5mm (section code 20617) , top and side 92x31.75x1.5 (section code 20831) & aluminum section of shutter top and bottom size 40 x 18 x 1.5 ( section code 20736) , interlock size 40 x 18x 1.45 (section code 20737), side/ middle size 40 x18 x1.55, (section code 20738) including necessary joining cleats, glazing clips rubber backing, anodised aluminum snap beading screw, anodised aluminum fitting complete as per site requirtement glazing by using 5mm thick plain sheet glass and ss wiremess of dia 0.36mm and aperture 1.4mm thick all as specified and directed. Ref drg no celz/c-td/151 sheet no 1/1 & 2/2 .
Note- 1. Glazed shutter glass thickness not less than 5mm and ss wiremess shutter with ss wiremesh as approved by GE is also included. No payment will be made separately.
2. No extra payment will be made for section profiles of higher sizes.
60
-
-
S&F powder coated aluminum ventilator ( louvers) shutter with 3.8 mm thick plain / tinted glass consisting of frame of size 63.5 x 44 and shutter sections weighing not less than 0.55 kg/m with locking arrangement as approved fixed including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings with stainless steel wiremesh of 0.36mm including necessary fixing arrangement complete all as specified and directed
6
-
-
M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified.
160
-
-
M & L Preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified
120
-
-
S&F in repair peg set of 6 brass fancy type,min length 600 mm all as specified & directed.
28
-
-
M&L for precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in Chhajjas, cover slab, shelves and similar articles set in CM 1:4 complete all as specified and directed.
0.5
-
-
M&L for RCC 1:2:4 type B1 (using 20 mm graded aggrigate)as in slab,chajjas,beam etc and similar suspended works complete, all as specified and directed.
1
-
-
Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exc 200mm thick, flat rough finished surface of concrete complete, all as specified and directed.
25
-
-
Repair of Chajjas upto 2 stories by completly removing old broken plasters or pieces of concrete and dubbing out with cement mortar 1:4 or by cement concrete 1:2:4 (12.5 mm graded aggregate) incl necessary formworks and scaffoldings upto 2 stories and GI wire netting 0.90 mm dia and 12 mm mesh for propper bonding of concrete/ mortar and finally finishing the surface smooth and even w/o using extra cement and applying the finish matching from the neighbouring areas complete (plan area of chajjas to be measured).
10
-
-
Item No. 111 to 173 for Job No. LSA/DWP/36/SRW/2024-25 M&L 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floors complete all as specified and directed.
730
-
-
M&L for machine cut kota sotne slab, 20-25mm thick over and including 15mm thick screed bedding in cement mortar 1:6 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified.
680
-
-
M&L for machine cut kota sotne slab in skirting / steps / risers of reqd size, 20 to 25mm thick & including 15mm thick screed bedding in cement mortar 1:4 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified and directed.
68
-
-
S&F solid PVC frame (Single Rebated ) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed.
20
-
-
M&L in repairs 18/19mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws, including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and pelment boxes, cupboard, shelves etc all as specified and directed.
20
-
-
S&F continous (Piano) hinges, mild steel, bright finish, width of flaps (when open) 30mm complete all as specified and directed.
45
-
-
S&F in repairs PVC coated, MS curtain rods 22-25mm dia with and including fixing of two Nos MS brackets and decorative type PVC knobs at both ends of curtain rod all as specified and directed.
95
-
-
Hacking out old broken glass (any thickness, size , quality or description) from metal frame including punching or drilling out old glazing complete all as specified and directed.
40
-
-
S&F 3mm thick glass, ordinary quality, 3mm thick fixed with oil putty size of glass not exc 0.50 sqm in each pane, complete all as specified and directed.
40
-
-
S&F MS butt hinges, medium weight, cold rolled, ISI marked of size 100mm, complete all as specified and directed.
105
-
-
S&F 150mm long aluminium anodised barrel tower bolts of extruded section all as specified and directed.
60
-
-
S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
60
-
-
S&F 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.
40
-
-
S&F 300mm long alumimium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy all as specified and directed.
20
-
-
M&L cutting holes in brick walls (exc half brick but not exc one brick) for inserting hold fasts and making good dismantled portion in PCC 1:2:4 (20mm aggregate) and cement mortar 1:3 complete all as specified and directed.
120
-
-
M&L mild steel work such as hold fasts, hooks, clamps etc and similar work conforming to Fe 290 , Gde -165 complete all as specified and directed.
15
-
-
Taking down old unserviceable 25mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.
10
-
-
S&F 25mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.
5
-
-
Refixing old 15mm GI tubing (Concealed type) galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.
5
-
-
Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.
5
-
-
Refixing old 25mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.
5
-
-
Taking out old u/s water closet and S&F vitreous China "Orissa pattern" size 580 x 440mm" coloured, with intergral foot rests with vitreous china 'P' or 'S' trap front or back inlet including connection to trap and to flushing pipe, anti syphnage pipe and making good the floor to match the existing complete all as specified and directed.
2
-
-
Supply only liquid water proofing compound of approved quality and make confirming to IS complete all as specified and directed.
48
-
-
Taking down 100mm / 75mm dia AC rain water pipe (any size or pattern ) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed. (Measured over all as fixed along the centre line over the fittings and accessories)
80
-
-
S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.
5
-
-
S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.
10
-
-
S&F in repair new rigid PVC waste pipe of approved quality 32mm bore, 75mm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed.
24
-
-
M&L for preparation of old painted steel and iron surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
230
-
-
M&L for preparation of old painted wooden surfaces and applying two coat of synthetic enamel paint complete all as specified and directed.
40
-
-
S&F in repairs 15mm bore pillars taps fency type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.
4
-
-
S&F in repair soap dish, any type fixed to plugs with chromium plated brass screws completed all as specified and directed.
10
-
-
Demolition of cement concrete of any description from sunken floor (ground or Ist floor) and removing and depositing materials exc 150 Mtrs but n. exc 250 Mtrs away complete all as specified and directed.
1
-
-
M&L for mass concrete filling using PCC (1:5:10) type E2 in sunken floor complete all as specified and directed.
1
-
-
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded complete all as specified and directed.
15
-
-
S&F for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed and welded, complete all as specified and directed.
15
-
-
S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.
10
-
-
S&F steel door including projectiong type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and directed.
6
-
-
S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each pane, complete all as specified and directed.
8
-
-
S&F 3mm thick glass, ordinary quality, 3mm thick fixed with oil putty size of glass not exc 0.50 sqm in each pane, complete all as specified and directed.
12
-
-
M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism ) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed.
1250
-
-
M&L for waterproof cement based putty @ 1 Kg (undiluted ) per Sqm of average thickness 1 mm over the plastered / old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism ) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps :- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 Kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI
1250
-
-
M&L for one coat of acrylic water based exterior grade primer @ 0.9 Ltr (undiluted )/10 Sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 Ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.
1250
-
-
M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & colour stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram / litre as per the LEEDS specifications, anti fungal properties in two coats @ 1.79 Ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 Ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. Note for item No 17 to 19 above (a) The work pertaining to periodical services & water proofing shall be executed from authorised applicator through manufacturer of which the materials i.e Paint, Distemper, Cement base paint, putty etc is proposed to be used by the contractor and approved by Garrison Engineer.
1250
-
-
M&L preparation of new/old wall surfaces and applying two coats of oil bound distemper over1mm thick Birla white wall care putty after complete removal of existing treatment on old plastered surface including necessary preparation complete all as specified and directed
850
-
-
M & L for preparation of old /newly decorated plastered or un-plastered surface of walls, cornices, pilasters etc by brooming down scraping, filling all the nail holes etc and prepairing surface with plaster of paris etc and applying two coat of white wash on walls mixed with adequate qty of fevicol complete all as specified and directed.
1350
-
-
M & L for preparation of old /newly decorated plastered or un-plastered surface on ceiling surfaces, cornices, pilasters etc by brooming down scraping, filling all the nail holes etc and prepairing surface with plaster of paris etc and applying two coats of white wash on ceiling mixed with adequate qty of fevicol complete all as specified and directed.
950
-
-
Dismantling loose / disintergrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and doubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed.
30
-
-
M&L for 16 to 18mm thick granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding of edge laid over 15mm thick screed bed in CM (1:4) including rounding of edge of stone slabs one edge complete all as specified and directed.
15
-
-
Dismantling / taking down existing unserviceable RCC/PVC S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed
4
-
-
S&F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms)
4
-
-
S&F in repair 15mm dia two way bib taps, cast copper alloy chromium plated fancy type handle screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.
2
-
-
S&F in repair 20mm bore Gun Metal, globe or gate valves, with iorn wheel head, screwed both ends or iron pipe and fixed complete all as specified.
6
-
-
S&F in repair 25mm bore Gun Metal, globe or gate valves, with iorn wheel head, screwed both ends or iron pipe and fixed complete all as specified.
6
-
-
M&L75mm thick PCC type D-2 (1:4:8) using 40mm graded aggregate as in sub base complete all as specified and directed.
70
-
-
M&L chequered cement concrete tiles 20cmx20cmx25mm thick, set, jointed and pointed in neat cement slurry with pigment over 15mm thick screed bed in CM 1:6 complete all as specified and directed.
70
-
-
S&F in repairs sinks without drainage board made of stainless steel 1mm thick kitchen with plugs washers and waste pipe, etc complete, including bedding in cement mortar to dwarf wall or including fixing cantilver brackets and connecting union to pipe overall size 495mmx420mm bowl 410mm x 330mm x160mm complete all as specified and directed. Make : Nirali / eqvt.
4
-
-
M&L for cement concrete type C1 1:3:6 (20 mm graded stone aggregate) in surface channels and drains complete all as specified and directed.
3.55
-
-
M / L for PCC 1:3:6 type C1 using 20mm grade aggregate for coping complete all as specified and directed.
3.55
-
-
Taking down of existing hinges by welding or screw and S&F 100 mm size stainless steel butt hinges, medium weight, fixed with screw or welding complete all as specified and directed by Enginner-in-Charge
25
-
-
M & L for welding in repair exc 2.5 cm but not exc 5 cm in lengrh thickness of metal to be welded not exceed 6 mm all as specifed.
15
-
-
S&F aluminium anodized door with frame of size 100X44.5X 1.5mm, stile, middle and top rails of size 82X44.5X1.5mm thick and bottom rail of size 114X44.5X1.5mm thick including 5.5mm thick tinted glass panes with all fittings/ fixtures such as cleats, tower bolt, hinges, locking arrangement, pull and push handle of aluminium anodized, hydraulic door closer, floor spring etc., complete including aluminium and rubber beading all as specified and directed.
10
-
-
S&F in repair Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed ( 32mm) complete all as specified and directed.
5
-
-
Taking down shutters of any description exc 1.0 sqm and n. exc 2.00 sqm each shutter complete all as specified and directed.
7
-
-
Item No. 215 to 226 for Job No. LSA/DWP/46/SRW/2024-25 M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.
50
-
-
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed.
110
-
-
M&L RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.
45
-
-
M&L RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed.
25
-
-
M&L RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed.
30
-
-
M&L form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc ruogh finished surfaces of concrete flat all as specified.
297
-
-
M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for rough finished surface of concrete
385
-
-
M&L form work to sides of pillars, posts, struts, columns for rough finished surface of concrete
330
-
-
M & L for Preparing and applying two coats of cement base paint over a coat of alkali resistant primer on newly plasterd surface of wall complete all as specified and directed.
990
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for
9.9
-
-
S&F galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
26.4
-
-
S&F mild steel angles/flat iron as in fencing post and struts including embeeded in concrete and screwing etc including securing bolts, cutting tops to shape as directed, drilling holes notching for wire, etc complete all as spficied Fe 290 Gde E-165, complete all as specified and directed.
990
-
-
E/M Items common to all jobs Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete all as specified and directed.
745
-
-
Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed.
448
-
-
All as per serial item No 187 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.
89
-
-
All as per serial item No 187 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.
38
-
-
All as per Serial Item No 187 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed.
100
-
-
Supply and fix in replacement LED tube light fittings 1200 mm,20 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminum housing enviromental friendly, energy efficient complete all as specified and directed.
228
-
-
Supply and fix in replacement ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.
380
-
-
Material and labour in replacement for sub main wiring with 10 Sq mm nominal cross sectional area,3 run single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 10 Sq mm nominal cross sectional area, single core r runs ( neutral and earth colour code wire), 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.Note : 3 runs of 10 sqmm, 2 run of 10 sqmm earth and nutral conductor and 2 run of PVC conduit shall be measured as one unit length for
745
-
-
Supply and fix in replacement of MCB, DP, AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.
14
-
-
Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.
8
-
-
Taking down carefully ceiling fan of any sweep complete with all accessories, dismantling blades and deposit in safe custody of AGE E/M Yard for BER procedure complete all as specified & directed.
62
-
-
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with remote oprated all as specified and directed by Engr-in-Charge
50
-
-
Supply and fix in replacement of MCB, SP, AC, 240 volt of 06 to 40 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.
108
-
-
Item No. 240 to 270 for Job No. LSA/DWP/35/SRW/2024-25 All as per serial item No 187 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.
42
-
-
All as per serial item No 187 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.
28
-
-
S&F in replacement Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed
218
-
-
S&F in replacement Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed
40
-
-
S&F in replacement Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed
70
-
-
S&F in replacement Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed
40
-
-
S&F in replacement Modular White cover plate with frame,12 module complete all as specified and as directed
28
-
-
S&F in replacement Modular White cover plate with frame,8 module complete all as specified and as directed
28
-
-
S&F in replacement Modular White cover plate with frame,3 module complete all as specified and as directed
82
-
-
S&F in replacement Modular White cover plate with frame,2 module complete all as specified and as directed
12
-
-
S&F in replacement Modular Metal flush box 12 module complete all as specified and as directed
28
-
-
S&F in replacement Modular Metal flush box 8 module complete all as specified and as directed
28
-
-
S&F in replacement Modular Metal flush box 3 module complete all as specified and as directed
82
-
-
S&F in replacement Modular Metal flush box 2 module complete all as specified and as directed
14
-
-
S&F in replacement Calling bell , AC, 230 Volts, single phase complete all as specified and as directed
4
-
-
S&F in replacement bell push , AC, 230 Volts, 2 module complete all as specified and as directed
4
-
-
S&F in replacement telephone socket 1 module complete all as specified and as directed
4
-
-
Supply and fix in replacement of decorative wall mounting type LED light fitting, 1 x 15 Watt, 230 Volt made up of Polycarbonate including shade, lamp holder, 9/10 Watts LED lamp B22 CDL etc and all accessories pre-wired including connecting up complete all as specified and directed.
24
-
-
Supply and fix in replacement of integrated LED bulk head fitting 10 Watt, 6500K with IP 65 protection comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete all as specified and directed.
12
-
-
Supply and fix in replacement LED tube light fittings 600 mm, 10 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminum housing enviromental friendly, energy efficient complete all as specified and directed.
16
-
-
Supply & fix LED in replacement wall/surface mounted down lighter, 12 W including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified
8
-
-
Material and labour in replacement for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.Note : 2 runs of 4 sqmm, 1 run of 4 sqmm earth and nutral conductor and 1 run of PVC conduit shall be measured as one unit length for
525
-
-
Supply and fix AC modular Box 20 Amp with steel enclosure suitable for Geyser & AC protection to human from eletric shock due to direct and Indirect current as well as provide protection from overload and short circuit fault complete with MCB 20Amp after fixing making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified
26
-
-
M & L in factory made powder coated distribution board 4 way TPN DB Double door with metal double door (IP-43 protection IK -09) fabricated of CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps bus bar, Neutral bar, Standard din rail,earth bar and cable ties for cable management, top and bottom removable gland plates with provn for MCB TPN and RCCB as incomer and 12 SP MCBs outgoing after fixing making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified.
4
-
-
Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SP, AC, 240 volt of 06 to 32 Amp, "C" curve, 10 KA breaking capacity - 12 Nos.
2
-
-
S&F of exhaust fan single phase, 230/240 Volt heavy duty of size 300 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed.
4
-
-
S&F exhaust fans, plastic body, ac, single phase, 230/240 v of size 250 mm sweep with louver and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed
8
-
-
Supply and fixing in replacement LED Bldg security light fitting LED 35 watt with SPD, PF not less or equal 0.9,epoxy coated cover sheet aluminium housing with heat resistant toughtened glass & IP 66 incl with bracket, clamps, nuts, bolts protection complete all as specified and directed and directed.Make :- Philips cat part No. BRP031 LED35 CWMRPSUGRDX, Havells cat Part No.ENDURAPEARLNEOSL43WLED757SASYTOPC or equivalent make as directed by Engineer inb Charge.
8
-
-
Cutting walls any type, making holes for fixing of exhaust fan of any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed
12
-
-
Taking down carefully Geyser of any type and capacity complete with all accessories, dismantling and refixing at same place with new PVC hot series connection pipe after finish of civil work complete all as specified & directed.
8
-
-
Taking down electric meter and refixing on new board after rewiring complete all as specified and directed.
8
-
-
Item No. 271 to 288 for Job No. LSA/DWP/36/SRW/2024-25 Supply and fix switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.
420
-
-
Supply and fix socket outlet 2 in 1, 5 pin, 06 Amp, flush type, 230 volt complete all as specified & directed.
120
-
-
Supply and fix switch socket combination outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.
60
-
-
Supply and fix electronic ceiling fan regulator with rotary step, two module, humfree, AC, 240 volt, 100 Watt and duly ISI marked complete all as specified & directed.
30
-
-
Supply and fix in replacement of LED security light fitting 30 watt, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.
8
-
-
Supply and fix in replacement LED 40/36 watt light pureline slim suspended 50mm suspended (hanging type) aluminium extruded linear lighting luminaries with superior white powder coated finish, multiply option options of lights distrubution run length and luman packages for diffrent application to choose white colour higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminium housing enviromental friendly, energy efficient complete all as specified and directed.
30
-
-
Taking down carefully exhaust fan of any sweep complete with all accessories, dismantling blades and deposit in safe custody BER procedure complete all as specified & directed.
8
-
-
Material and labour for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
240
-
-
Supply and fix in replacement of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 12 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.
6
-
-
Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 08 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SPN, AC, 240 volt of 40 Amp, "C" curve, 10 KA breaking capacity - 8 Nos.
2
-
-
Supply and fix exhaust fans single phase 230/240 Volts heavy duty metalicbody of size 380 mm sweep 1400 RPM ISI marked, and making connection with twisted copper flexibelwire 23/0.076 mm incl lovers all as specified and directed.
8
-
-
Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50sqmm 4.0 core complete all as specified and directed.
180
-
-
Excavation in trenches soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of pipes/cables etc getting out and bottom surface to required gradient complete all as directed & specified
60
-
-
Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cable for under ground cable complete all as specified & directed. i.e 18 cm punned down thick shall be considerd for mesurement)
11
-
-
M & L Old size sub class 'B' bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable , adjacent/abutting each other complete all as specified
1
-
-
Supply & fix ball brass valves, high pressure, with polythene flote anu flynut complete, screwed for iron pipe and brass ferrule complete all as specified & directed .
2
-
-
S & F Gun metal gate valve with iron wheel hand ,screwed both ends,complete for size 25 mm bore including connecting materials complete all as specified and as directed.
4
-
-
Supply & fixing galvanised iron tubes of size 25mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed . Note for all items i.e BOQ item No. 01 to 247 (a) In case of any item found duplicate in this schedule, contractor should quote same rates, if different rates are quoted for same items having same description /nature of work noticed during execution of work, the lower rate quoted in respective item shall only be allowed for payment. (b) Contractor shall submit the Brochures,pamphlets, literatures,guarantee/warrantee certificates issued by the manufacturers for thenew items supplied and fixed at site as directed by Enginner-in-Charge.
126
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%