Military Engineer Services Tender

Construction of Parking shed for 84 Cycles with permanent specification, complete all as specified and shown on drawings.

Construction of Santry box with permanent, complete all as specified and shown on drawings.

NOTE: Schedule ‘A’ Part II to XI below are Prepriced by MES.

Lump sum price worked out by the Contractor for “EXCAVATION AND EARTH WORK” as listed in Schedule ‘A’ Part II

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION"” as listed in Schedule ‘A’ Part III

Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY"” as listed in Schedule ‘A’ Part IV

Lump sum price worked out by the Contractor for "SEWAGE DISPOSAL INCLUDING SEPTIC TANK & SOAKAGE WELL” as listed in Schedule ‘A’ Part V

Lump sum price worked out by the Contractor for “AREA DRAINAGE” as listed in Schedule ‘A’ Part VI

Lump sum price worked out by the Contractor for “ROAD, PATH AND CULVERT” as listed in Schedule ‘A’ Part VII

Lump sum price worked out by the Contractor for “COMPOUND WALL AND GATE” as listed in Schedule ‘A’ Part VIII

Lump sum price worked out by the Contractor for “STAGE ” as listed in Schedule ‘A’ Part IX

Lump sum price worked out by the Contractor for “ EXTERNAL WATER SUPPLY ” as listed in Schedule ‘A’ Part X

Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part-XI

SCHEDULE `A' PART - XII MISC B/R & E/M ITEMS is not prepriced by MES and prepriced rates indicates 0.0 under column 6 signified this fact only.

INTERNAL ELECTRICFICATION

S&F LED light fitting 1 x 10 Watt, 220V, AC, box type with driver, holder connecting up with three core flexible copper conductor cable 0.5 sqmm from Ceiling rose complete all as specified and directed.

S&F LED light fitting 1 x 40 Watt, 220V, AC, box type with driver, holder connecting up with three core flexible copper conductor cable 0.5 sqmm from ceiling rose complete all as specified and directed.

Supply & Fixing LED security 35 watt, input 110 to 220 volts as per IP 65 luminaries comprising of rectangular shape , high pressure die cast aluminium housing, with weather proof gaskets for tamp and driver compartment with Gl pipe 25 mm dia light grade bend to shape including necessary fixing arrangement complete all as specified and directed.

S&F MCB TPN 63 Amps, C curve type 10 KA ,415 Volts complete all as specified and directed.

S&F MCB SPN 40 Amps to 63 Amps, C curve type 10 KA, 240 Volts complete all as specified and directed.

S&F MCB SP 6 to 32 Amps, C Curve type 10 KA breaking capacity 240 Volts complete all as specified and directed.

S&F MCB SP 40 Amps: C Curve type 10 KA breaking capacity 240 Volts complete all as specified and directed.

EXTERNAL ELECTRIC SUPPLY

Supply and Installation commissioning & testing 11 KV Compact Sub Station with and including 1 No, 11 KV/630 Amps VCB, 1 No transformer 100 KVA, 11/0.433 KV & associated LT Distribution system & suitable , self contained power pack complete all as described & specified below- 11 kV 630Amps 21kA for 3 sec. Vacuum Circuit Breakers with series trip, self powered microprocessor based numerical over current and Earth Fault (IDMT+lnst) relay protection. Interconnection between HT Switchgear and transformer shall be using 1CX3X95 sqmm Aluminium armorured XLPE Cable. IDMT relay with communication port-l No Protection CT 5/1 Amps, 2.5VA, 5P10 - 3 nos Manometer - 01 No Operating Handle - 01 Nos

TRANSFORMER 100 KVA, 11KV/433V BIS marked & BEE certified copper wound oil cooled indoor type step down transformer with Offload tap changer switch to very secondary voltage in steps of rating 2.5% from +7.5% to -7.5% with all standard fittings & accessories including OTI, WTI & marshalling box, energy efficiency 4 star as per IS 1180 losses at 50 % load 475 watt and at 100 % load 1650 watt) LVS PANEL - 300 AMPS Aluminium busba r(Four pole, current density - 1AMP/SQMM) INCOMER FROM TRANSFORMER 160 AMPS 433V, 4P, 36 KA Manually Fixed type MCCB microprocessor Based over current, short circuit and earth fault Release - 01 Nos LED type Indicating Lamps- R, Y, B Phase and ON-OFF-TRIP- 01 Set Digital Multifunction meter of class 1.0 accuracy with RS485 Port (Make: Rishabh/Conzenv/Secure/Eq) - 01 No OUTGOING 100 AMPS, 433V, 4P 16 KA Manually Fixed type with Thermal Magnetic Based over current & Short circuit fault Release) - 03 Nos (02 Nos for Bldg and 01 No spare) 32 AMPS 415V MCB DP with Neutral 10KA - 01 Nos 25 AMPS MCB SPN 10KA - 01 Nos Timer switch analog type complete with contactor relay and bypass arrangement, 230 volts two phase of 20 amps rating - 01 No. OUTDOOR ENCLOSURE Outdoor type enclosure having construction of Galvanised Sheet Steel of thickness 2 mm for Load bearing member and 1.5 m for Non Load bearing member.

The Enclosure shall have IP-S6 degree of protection for HT & LT switchgear compartment & IP23 degree of protection for Transformer compartment. The enclosure exterior shall be Polyuratne painted (Colour Light Gray & D.A. Gray ). Each compartment will be provided with the door and pad locking arrangement. The Compartment illumination lamp with door operated switch shall be provided for MV and LV compartment. Separate switch operated bulket lamp. INTERCONNECTION AND EARTHING Interconnection Between HT switchgear & Transformer using suitable size 4P Al bus bar trucking & Interconnection between Transformer & LT switchgear using Aluminium Busbars. Internal earthing connections by using 50 x 6 Gl strips including Transformer Neutral earthing.- 01 job Note:- (a) Package Sub-Station is outdoor plinth mounted type. Erection, Commissioning and Civil work for package substation shall be as per OEM specifications and rate is inclusive for the same. (b) Package Substation complete with the internal interconnections shall deemed to be included in the rate quoted. Note :1. Compact Substation shall be installed at a height of 1000mm above the ground level. 2. Compact substation shall be having IP-56 3. Chain link fencing shall be provided all around the CSS. It shall be provided minimum 750mm from each side of Compact substation of height of 1.8 mts. Chain link fencing to be measured and paid for separately.

Supply and fixing of 20W LED Street light with system Lumen Effcacy 100 Lm/W operating Voltage between 140-270 VAC, Driver will have cut off at 300 VAC, IP66 protection, power factor more than 0.95%, Over all electrical efficiency more than 90%, connecting with PVC copper cable of size 1.5x3Sqmm as IS 10322 lat all as specified and directed.

S&F Non metallic Junction box made out of thermoplastic size not less than 28 cm xl7cmxl0cm hinged with lockable arrangement including aluminium bus bar TPN capacity 63 Amp with provision of tapping incoming and outgoing cable connection with gland box of suitable size and fixing on pole/grouting in PCC muff complete all as specified and directed.

Supply & fix Decorative LED Post Top Lantern light fitting with max, system wattage 40 watt and system lumen output not less than 80 lumen per watt, total system lumens not less than 3200 lumens, PF not less than 0.90, circular canopy and dear acrylic cover for 360 degree indirect, uniform, glare free light distribution including taking out old any type light all as specified and directed by Engr-in-charge.

Supply & fix cable route marker of size 100 x 25 x 3 mm size incl round shape plate which engraved LT/HT cable complete with PCC and earthwork all specified and directed.

S&F in replacement multi stranded copper cable PVC insulated unsheathed 1100 volts grade of size 2.5 sqmm 3 core, drawing through tubular pole upto light fitting and making connections and testing for functioning of light fittings complete alias specified and as directed.

M&L for Construction of Chain link on fencing post of size 40 x 40 x 6 mm of height 1.80 mtr at 2 mtr c/c around platform including excavation and earth work 30 cm embedded portion of angle iron in PCC 1:2:4 type B2 of size 60 x 60 x 60 cm. Chain link fencing of height 1.8 mtr made out of Gl wire not less than 3mm and pitch not more than 75mm. Angle iron gate using 40 x 40 x 6 m angle iron of size 2 x 1.5 m with vertical flat 25 x 6 mm @ 10 com c/c including hanging & locking arrangement. 15 mm thick plaster in CM 1:6 on brick masonary platform. All exposed surfaces of steel, work shall be given two coats of synthetic enamel paint over a coat of red oxide primer. Stair case of brick masonary for easy access to the plate form.

EXTERNAL WATER SUPPLY

M&L for construction of fly ash brick masonery valve pit of size 90x90x90 cm (internal dimension) with MS top coer of 3mm thick sheet, fixed on frame made out of angle iron 40x40x6mm thick with locking arrangement including two coats of synthetic enamel paint over a coat of red oxide primer to MS sheet internally and externally & iron surface, brick work in cement mortar 1:4,15mm thick plastering in cement mortar 1:4 (internally & externally) 150 thick plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate for base, 100mm thick PCC 1:2:4 type B-l using 20mm graded mechanically crushed stone aggregate for coping two coats of white wash internally after preparation the surface complete all as specified and as directed.

SUMMER APPLIEANCE

Supply & install water cooler electric driven (single phase), having approx storage capacity of 80 Litre and nominal cooling capacity of 40 litre per hour complete all as specified and as directed.

Supply and fix desert cooler electric driven 230 Volt (Single phase), having nominal air flow capacity of 5000 Cum per hour (or nearest size) Steel body complete all as specified and as directed..

Supplying & fixing of Angle iron 40x40x5mm size suitable for desert cooler including holes in wall & PCC including welding work all as specified and as directed.

ROAD, PATH AND HARDSTANDING

M&L for GSBC (sub base) 200 mm thick consolidated thickness in two layers 100 as per table 400-1 morth specification, spread, rolled with 8-10 ton capacity vibratory roller and consolidated to required gradient and camber in two layers complete all as specified and as directed.

M&L for 150 mm thick (compacted thickness) Wet mix macadum (WMM) using stone crushed aggregate of grading required as per table 400-11 of yellow book of mors laid in two layers 75 mm each with mechanical means and rolling with 8-10 tonne power roller over compacted sub base complete all as specified and directed. (Note-mix will be prepared in mixing plant of suitable capacity)

M&L for road line painting 100 mm wide with golden yellow, white thermostatic compound with reflectorised glass beads on bitumen road providing and laying of hot applied thermostatic compound 2.5 mm thick including reflectorised glass beads @ 250 gm per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRS 35 the finished surface to be levelled, uniform and free streaks and holes in addition where arrow of letters to be provided thermostatic compound may be machine sprayed the colour of compound with traffic diversion arrangement if required as per MORT&H clause 803.4 complete all as specified and directed.