Military Engineer Services Tender

Lump sum price worked out by the contractor for ROAD / PATH / CULVERT / HARDSTANDING as listed in Sch 'A' Part IV.

Lump sum price worked out by the contractor for AREA DRAINAGE as listed in Sch 'A' Part V.

Lump sum price worked out by the contractor for EXTERNAL ELECTRIC SUPPLY as listed in Sch 'A' Part VI.

Lump sum price worked out by the contractor for EARTHWORK AND SITE CLEARANCE as listed in Sch 'A' Part VII.

Price item wise worked out by the Contractor for Schedule `A' Part-VIII (rate against Srl No. 9.0 to 23.00 shall be quoted by the Contractor)

M&L for flame proof point wiring with FRLSH PVC insulated, unsheathed electric cable, 1100V grade AC, single core multi stranded copper conductor of size 1.5 Sq.mm nominal cross sectional area for phase & neutral drawn through & including concealed ERW stove enamelled rigid steel conduit not less than 25 mm dia & 1.6 mm wall thickness with all conduit accessories in concealed wiring system & 1.5 Sqmm green FRLSH PVC insulated, unsheathed stranded copper conductor earth wire connected to earth dolly by providing lugs including minimum 1.0 mm thick galvanized sunken box with ISI marked laminated sheet cover complete for mounting switches, sockets, fan regulators etc for following complete all as specified and directed: -

Onle light point controlled by one switch

Onle light fan controlled by one switch

One three pin switch socket outlet point 5 Amp on independent board

All as above Sl. No. 9.00 but with copper conductor cable for one three pin sockedt outlet, 15 Amp independent, with cable 2.5 Sqmm size complete.

S&F switch piano flush type single pole, one way 5 Amps 230 Volts AC circuit flame proof complete all as specified and directed.

S&F socket outlet 5 Amps, 5 Pin, flush type, multipurpose, 230 Volts AC circuit flame proof complete all as specified and directed.

S&F socket outlet 2 in 1, 5 & 15 Amps, 230 Volts AC circuit flame proof complete all as specified and directed.

S&F switch piano flush type single pole, one way 15 Amps 230 Volts AC circuit flame proof complete all as specified and directed.

S&F LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/vapour group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. complete with accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified & directed.

S&F flame proof exhaust fan, 300mm, 230 volt, complete with all accessories and including connecting up with three core flexible copper conductor cable of suitable size and GI flexible conduit complete all as specified and directed.

S&F factory made epoxy powder coated distribution board SPN 6 ways double door with acrylic top cover flame proof (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, netral bar, standard DIN rail, earth bar and cable ties for cable management top and bottom removable gland plates complete all as specified & directed.

S&F MCB single pole 240 Volt 'C' curve 10 KA, 5 to 31 Amps capacity flame proof complete all as specified and directed.

S&F MCB single pole and neutral 240 Volt 'C' curve 10 KA, 16 Amps capacity flame proof complete all as specified and directed.

S&F galvanised steel high mast lighting system suitable for 4 Nos flood light fitting with standard mast dimensions, height 12.5m bottom (A/F) 3.60mm , top (A/F) 150mm, plate thickness 3/3mm, PCD 445mm, foundation bolt M24750X4, luminary capacity 55m/s:8, 50m/s:9, 47m/s:9, 44m/s9, 39m/s:9 including mast construction, mast head assembly work, Luminaires carriages fabrication work, Winches, Suspension system, Electrical system, Earth point and lighting final and foundation bolt set as per Bajaj Mast Ref No BMRLMVV/12.5M complete all as specified and directed.

Supply, fixing and testing energy saving, die cast aluminium housing IP-65 protection, 150W LED flood light fitting with high power LED as light source complete fixed on pole using 30x5 flat iron clamps, nuts bolts & washers all as per site requirement complete all as specified and directed.

S&F 4 pole TPN 0.5 to 4 Amps, 50 Hz, 415 Volts with rupturing capacity 10 KA (For building No 2, 3 & street light) complete all as specified and directed.

S&F 4 pole TPN 6 Amps, 50 Hz, 415 Volts with rupturing capacity 10 KA (For building No 1) complete all as specified and directed.

M&L for SS enclosure for mounting MCCB as specified under relevant items complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanized iron strip 32x6mm as earth strip by means of bolts, nuts, check-nuts, and washers of galvanized iron or steel connected to earthing test point all as specified including 40 mm dia GI tubing light grade and necessary fitting for protection of GI wire including supplying and laying charcoal dust, common salt in alternate layer, PCC pit with 1:3:6 Type C1 (Using 20 mm graded stone aggregate) RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 6 mm dia round bars @ 75mm C/C both ways with MS handle 12mm dia plastering 15 mm thick in CM 1:6 externally upto 150 mm below ground level, GI funnel with 20 mm dia medium grade GI pipe for watering and wire mesh including excavation and earth work, and disposal of surplus soil complete all as specified and shown in Plate No. 3 of SSR Part I of 2009 and connected to earth test point including testing and marking building Nos and writing test results on a 3.0 mm thick painted MS earth pit marking plate (200 mm x100 mm) duly welded with a 450 mm long 10mm dia round MS rod fixed with the earth pit chamber by grouting complete including taking out old unserviceable earthing system including demolishing with old earth pit chambers and removing of debris from the site complete all as specified and directed.

Preparing new road surface including cleaning the road surface of of all dirt, oil, grease and foreign material etc. and applying 2.5mm thick road marking strips (Retro reflectrive) of specified shaed / colour using hot thermoplstic material conforming to IS-164 apply by fully automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, including glass beads, propane tank heater and profile shoe heater driven by expeienced operator in accordance with manufactureres instructions all as per BS EN 1871, B5 EN 1423 and BS EN 1424 complete all as specified and directed.