Military Engineer Services Tender

S&F electric water heater, storage type steel body with steel inner tank and heating element upto 2 KW, BEE 5 star rating, capacity 25 liter, energy efficient complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. complete all as specified and directed.

S&F tubes, 'medium grade', galvanised iron of size 15 mm dia bore, with all fitting (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions, etc.) fixed to walls etc with clips, wall hooks, wooden plugs, including cutting, threading and screwing etc. complete all as specified and as directed.

S&F Bib taps chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15 mm dia complete all as specified and directed.

S&F Stop valves, fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15 mm dia complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm suitable for hot water complete all as specified and directed.

Supply, installation, commissioning and testing of ECO friendly Diesel Engine driven generating set outdoor type of capacity 62.5 KVA or nearest higher capacity, suitable HP, as per CPCB emission norms, 415 volts AC, 3 phase and neutral wire, 50 HZ, 4 wire, 0.8 PF, Governing class G3, noise level 75 dBA, as per manufacturer's norms, directly coupled alternator, measuring display board etc common steel base fixed on cement concrete in foundation as per OEM recommendation platform with inbuilt AMF panel as per manufacturer recommendation and other accessories comprising of following: - DIESEL ENGINE ECO friendly for emission and noise (CPCB NORM COMPLIANCE) 4 stroke diesel Engine confirming to BS std developing suitable BHP @ 1500 RPM turbo charged water cooled complete with a provision of 10% overload for 1 hour. (i) Fly wheel with starter ring for generating set. (ii) Dry type air filter. (iii) Lube oil cooler assembly with accessories. (iv) Exhaust air manifold. (v) Exhaust silencer (vi) Expansion bellow (vii) Exhaust gas turbocharger Note: The plinth should be as per manufacturer recommendation and the rate of plinth is deemed to be included in Unit quoted rate.

(viii) Fuel filter (pre micro) (ix) Oil filter (x) 12V or 24V DC as per manufacturer norms electrical starting system with starting motor & battery charging alternator with self starter and other auto electric accessories as recommended by manufacturer. (xi) Centrifugal by pass filter (xii) Front and rear mounting support. (xiii) Engine control panel consisting of OFF/ON/START keys lub oil pressure gauge, Ammeter, Electric hour meter, Speedo Meter. (xiv) Safety against low lube oil (xv) Engine test certificate (xvi) Cold starting kit (xvii) Engine main manual with spare part list (xviii) Governer as per manufacturer norms (xix) Cooling radiator with first fill coolant.

ALTERNATOR Silent pole brushless copper wound type suitable for direct couple to engine self excited, self regulated with fast response thruster type electronic automatic voltage regulator with output voltage within desired limit(+1%) Dynamically balanced 415 V , AC, 3 PHASE, 50 Hz, 4 wire 0.8 PF lagging 62.5 KVA 1500 RPM star connected screen protected drip proof enclosures with radial fan mounted on rotor with insulated class H with following accessories :- (i) One MS frame suitable for mounting of Engine and Alternator. (ii) Fuel tank of suitable capacity as per manufacturer recommendation complete with fuel gauge inlet/outlet connections drain valve with plug etc. (iii) Battery of suitable capacity with copper leads and terminal leads of suitable size. (iv) One set of AVM pads fitted on base frame.

(C) Acoustic Enclosure Supply and install of Acoustic Enclosure suitable for 62.5 KVA DG set the degree of protection IP-42 confirming to IS-2147 as under:- (i) Fabricated out of CRCA sheet of suitable size as per manufacturer design. Polyester based powder coated internally and externally with lockable type door handle. All nuts and handles shall be zinc coated. (ii) The door are gasketted with EPDM gaskets. (iii) Sound proofing with high quality rock wool/mineral wool confirming to IS 8183 of 50 mm thickness and density at 96 kg/m³ covered with fiber glass cloth and perforated powder coats sheet specially designed allenuators (sound controller) at air entry and exit of the container noise level shall be not exceed 75 dB at 1 meter distance as per CPCB norms. (iv) Adequate ventilation to meet air requirement for combustion and heat removal with provn of a blower. (v) Emergency stop push button out side the container. (vi) Provn of light inside the canopy 20 W LED fitting with wiring and control switch. Note:- The plinth should be as per Manufacturer Recommendation and the rate of plinth is deemed to be included in quoted rate complete all as specified & directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground, (Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth strip 32x6 mm as earthing lead by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing. Note:-if desired earth test value is not less than 2.0 ohm, contractor shall redo the earthing in same cost.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 95 sq. mm 3.5 core complete all as specified and directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. mm 3.5 core, complete all as specified and as directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm 3.5 core, complete all as specified and as directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 4 core, complete all as specified and as directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 core, complete all as specified and as directed.

Excavation in trenches, n exc. 1.5m wide and n exc. 1.5m in depth , for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n exc. 10sqm on plan and n exc. 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.

M&L for Bricks, common burnt clay building bricks, sub class 'B' of size 225mmx115mmx75mm for protection of cable in trenches complete all as specified and as directed.

M&L for demolition of road/path /concrete in ground floors and paving n exc. 15 cm thickness (below or above ground level) .complete all as specified and as directed.

M&L for cement concrete type B-2, 1:2:4 (40mm graded aggregate) 150mm thick complete all as specified and as directed.

M&L for GI tubes, of size 50 mm dia light grade, galvanised, with all fitting, laid in trenches for protection of cable in road / drain crossing complete all as specified and as directed.

Supply, install, testing and commissioning of cubical housing cabinet type LT feeder pillar box outdoor type, plinth mounted, totally enclosed dust and vermin proof openable from both front and rear side made out of 3.15mm thick MS Sheet overall size to accommodate the following and built upon suitable size angle iron frame work, having front and rear hinged doors, lifting lugs (2 Nos), earthing strips at rear side, bottom detachable gland plate complete with suitable size zinc plated and passivated nut, bolts, spring and washers and apply powder coated painting. The panel should be suitable for 415 volts, 50Hz, 3 phase 4 wire system and shall be completed with 400 amps capacity solid aluminium bus bar having 1100 volts grade sleaving and internal connection should be provided with aluminium strips of suitable size and to accommodate the following MCCBs, necessary foundation work complete all as specified and as directed (Note: (a) The item rate is inclusive of necessary Bus Bar, volt meter, ammeter, control wiring, CT, instrument fuse holder, LED indication lamps etc). (a) 4 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 35 KA (incoming)-01 No. (b) 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 25 KA. (outgoing)-02 Nos (c) MCB TPN 32 Amp, 240 V, 10 KA 'C' curve (outgoing)-03 Nos (d) MCB SPN 32 Amp, 240 V, 10 KA 'C' curve (outgoing)-03 Nos

Supply, installation and testing window type air conditioner, inverter technology, of capacity 1.5 TR 5 star rating, high energy efficiency, non CFC refrigerant, condenser coil copper, indoor noise level-high 45 db, low 37 db, evaporator fin type hydrophilic blue fins, condenser fin type anti-corrosive blue fins, dust filter, auto restore, sleep mode, along with remote for working on 230V, 50 Hz, complete including cutting of existing wall / window and proper fixing and making good disturbed surface with existing surface, including supply and fixing of decorative ply if required and taking down old AC including removing from site and deposited in MES store yard, complete all as specified and directed. Make: Carrier / Voltas / Blue Stat / LG

Supply, installation and testing split type air conditioner, inverter technology, of capacity 1.5 TR 5 star rating, high energy efficiency, non CFC refrigerant, condenser coil copper, indoor noise level-high 45 db, low 37 db, evaporator fin type hydrophilic blue fins, condenser fin type anti-corrosive blue fins, dust filter, auto restore, sleep mode, along with remote for working on 230V, 50 Hz, complete including cutting of existing wall / window and proper fixing and making good disturbed surface with existing surface, including supply and fixing of decorative ply if required and taking down old AC including removing from site and deposited in MES store yard, complete all as specified and directed. Make: Carrier / Voltas / Blue Stat / LG

Supply, installation and testing of refrigerator, 240 liter, or nearest higher capacity, high energy efficiency, economical and cooling 5 star rating without fluction, inverter, stabilizer free operation, door lock, defrost system, material stainless steel, shelf type-toughened glass, fleet driven single phase, 230V, 50 Hz supply complete including taking down old Refrigerator deposited MES store yard complete all as specified and directed. Make: Voltas / LG/Whirlpool

Supply, installation and testing of refrigerator, 310 liter, or nearest higher capacity, high energy efficiency, economical and cooling 5 star rating without fluction, inverter, stabilizer free operation, door lock, defrost system, material stainless steel, shelf type-toughened glass, fleet driven single phase, 230V, 50 Hz supply complete including taking down old Refrigerator deposited MES store yard complete all as specified and directed. Make: Voltas / LG/Whirlpool

Supply, installation and testing of water cooler electric driven (single phase), 230V, 50 Hz, having approx storage capacity of 40 liter and normal cooling capacity of 40 Liter per hour, reciprocating compressor, refrigerant non CFC, front top, stainless steel, front bottom stainless steel, side stainless steel, rear stainless steel, chiller tank, stainless steel, legs PP (B120MA) including taking down old water cooler, removing from site and deposited to MES store yard complete all as specified and directed. Make: Voltas / Usha / Blue star

Supply, installation and testing of water cooler electric driven (single phase), 230V, 50 Hz, having approx storage capacity of 60 liter and normal cooling capacity of 40 Liter per hour, reciprocating compressor, refrigerant non CFC, front top, stainless steel, front bottom stainless steel, side stainless steel, rear stainless steel, chiller tank, stainless steel, legs PP (B120MA) including taking down old water cooler, removing from site and deposited to MES store yard complete all as specified and directed. Make: Voltas / Usha / Blue star

Supply, installation and testing of water cooler electric driven (single phase), 230V, 50 Hz, having approx storage capacity of 150 liter and normal cooling capacity of 40 Liter per hour, reciprocating compressor, refrigerant non CFC, front top, stainless steel, front bottom stainless steel, side stainless steel, rear stainless steel, chiller tank, stainless steel, legs PP (B120MA) including taking down old water cooler, removing from site and deposited to MES store yard complete all as specified and directed. Make: Voltas / Usha / Blue star

Supply, installation and testing of deep freezer, 325 liter capacity, 5 star rating, nearest higher capacity, high energy efficiency, economical and cooling without fluction, inverter, stabilizer free operation, door lock, defrost system, material stainless steel, shelf type-toughened glass, fleet driven single phase, 230V, 50 Hz supply complete including taking down old deep freezer, removing from site and deposited to MES store yard complete all as specified and directed. Make: Voltas / LG/Godrej / Whirlpool / Haier

Supply, installation and testing of mono block pump set suitable for 415 V, 3 phase system alongwith PCC foundation, having capacity 12.5 HP, for condenser pump motor having delivery size 65 mm, head range 28 meter, power rating 9.3 KW, suction size 80 mm, discharge range 18.2 LPS, at WSA AC Plant, as per sample, complete as specified and directed. Make- Kirloskar Model No: KDS-1348+ or equivalent

Supply, installation and testing of hot water generator 56 KW with hot water pump 5 Hp (2 Numbers) and 3 phase supply 440 volts complete all as per directed with following details: - (i) Electric hot water generator for meeting winter heating requirement vertical type of 56 KW or nearest capacity, as per contractors own design confirming to ASME boiler and pressure code complete with heater banks with mild steel body 10 mm shell 12 mm dish head top open able with thick MS flat and sufficient Nos of nuts bolts flange etc. complete with fiber glass 50 mm thick insulation covered with aluminium foil of size 26 gauge all around with electrical control panels, wiring and control and safety devices temperature & pressure gauges, thermo couple, temperature control and butterfly valve-01 No. (ii) 2 Nos (01 working + 01 standby) of hot water pumps for pumping hot water to 5 Nos. of AHUs mono block type 5 HP capacity duly coupled with SPDP squirrel cage induction motor complete with pressure gauge and other accessories including foundation of suitable capacity with DOL starts operated from main control panel including all plumbing work. (iii) Supply and laying mild steel ‘C’ class hot water pipe line network for recirculation of hot water with necessary fittings such as butterfly valves, balancing valves from hot water generator, inlet and outlet connections and re circulating the hot water from hot water generator pumps, pumps to AHUs, AHU to HWG along with insulation of fiber glass minimum 50 mm thick insulation covered with aluminium foil of minimum 26 gauge all round including water pressure gauge, thermometer in hot water generator inlet and outlet, AHUs inlet AHUs outlet connections complete with all accessories.

M&L for MS pipe 50 mm with PUF insulation slab 30 mm thick with and including applying bituminous compound and GI cladding with 26 gauge GI sheet complete all as specified and directed.

S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe, for 50 mm bore of pipe complete all as specified and directed.

Supply only digital temperature and humidity meter complete all as specified and directed.

Supplying, installing, testing and commissioning of factory made double door out door type cubical type, dust & vermin proof LT panel board hut type top made out of 3.15 mm thick CRCA sheet steel of size with angle iron channel pedestal frame compartmental type dust and vermin proof free standing with pad locking sealing arrangement, earthing stud labelling, painting, interconnections, providing of danger plates etc. suitable for working on 415 Volts 3 phase 50 Hz AC supply, extendable at both ends painted with powder coated as per seven tank process and IP 54 and IS 8623 protection with cable alley cable entry hole at the bottom and mounting on angle iron frame duly grouted on in and including PCC (1:3:6) platform raised at 30 cms above ground level. Connection including 3 phase and neutral Bus bar of Aluminium of rating 300 amps for 3 Phase and 150 Amps for neutral with non adhesive colour coated insulation sleeves mounted on bus bar insulator drilled holes on bus bar strips for tapping including nut bolts and washer complete with aluminium strips of suitable wire and all as specified and directed suitable for Comprising and provision of the following: -

a) Ammeter, digital including selector switch b) CT of required capacity-03 No (c) Voltmeter Digital type including selector switch (d) Phase indicating lamps -03 Nos (e) Control wiring (f) Copper conductor wiring (a) 300 Amps Aluminium bus bar for all three phases and 150 Amps for neutral-01 set. (b) MCCB capacity 200Amps 4 pole with fixed Thermal trip,25 KA -01 No (as incoming) (c) Metal claid industrial socket with plug top SPN, with 20 Amps MCB as protection-04 Nos (For Outgoing) (d) MCB, TPN, 32 Amps, 10 KA -03 Nos (For Outgoing) (d) MCB, SPN, 32 Amps, 10 KA -04 Nos (For Outgoing)

M&L for 40 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, incl taking out old pipe complete all as specified and directed including clamps, nut bolt and washers.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete all as specified and directed.

M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers not exc. 15cm thick, spread, levelled and blinded with earth and rammed including watering complete all as specified and directed

M&L for hard core of broken bricks of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Form work to edges of concrete flats, openings, floors & roofs and sides of RCC/PCC bands in walls and similar work exceeding 10cm but not exceeding 20cm wide for rough finished surfaces of concrete complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregates) in slabs supported on walls, beams & columns, in floors etc. complete all as specified and directed (reinforcement to be measured separately).

M&L for mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coats of exterior acrylic emulsion in camouflage pattern over a coat of cement primer complete all as specified and directed.