Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date21 Dec 2024
Closing Date23 Jan 2025
Tender Amount₹ 39,97,000
Costs
EMD
₹ 79,950Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_689808_1Tender No
CWE/LKO/EM/T-151 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
M&L for Brick work with Fly ash brick designation 100 Kg / Sqcm, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, using bricks of size 230 mm x 110 mm x 70 mm confirming to IS 12894, complete all as specified and as directed by Engineer-in-Charge.
5
-
-
... More
M&L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone agrregate) as in sub base for floor etc all as specified and directed.
50
-
-
... More
M&L for 40 mm thick PCC 1:2:4, type B-1 (using 20 mm graded stone agg) finished even and smooth with using extra cement all as specified and as directed.
50
-
-
... More
M&L for mild steel TMT reinforcement bars of grade FE-500, 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or securing with clips complete all as specified and directed by Engineer-in-Charge
100
-
-
... More
M&L for mild steel TMT reinforcement bars of grade FE-500, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or securing with clips complete all as specified and directed by Engineer-in-Charge
220
-
-
... More
M&L for cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in coping and the like, weathering, slightly rounded or chamfered angles including necessary form work complete.
2.5
-
-
... More
Supply only integral water proofing compound powder ISI marked
30
-
-
... More
Taking up or down 15 mm bore steel tubing and connections, from walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.
40
-
-
... More
Taking up or down 20 mm bore steel tubing and connections, from walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.
45
-
-
... More
Taking up or down 25 mm bore steel tubing and connections, from walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.
30
-
-
... More
Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrived from taking down above).
10
-
-
... More
Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 20 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrived from taking down above).
5
-
-
... More
Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 25 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrived from taking down above).
5
-
-
... More
S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified.
30
-
-
... More
S&F 20 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified.
40
-
-
... More
S&F 25 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified.
25
-
-
... More
M&L for Cleaning of HDPE service water tank of capacity upto 500 litre, and the connected circulating pipes at any position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots etc or any other foreign material from the bottom, cover and internal surfaces by scraping using wire brush, draining out the water from the tank and washing internally with water & bleaching powder (0.10 Kg of bleaching powder will be mix in 1 litre water) and again draining out the water from the tank and writing the date of cleaning with white synthetic enamel paint on black background with synthetic enamel paint complete all as directed by Engineer-in-charge.
2
-
-
... More
M&L for Cleaning of HDPE service water tank of capacity upto 1000 litre, and the connected circulating pipes at any position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots etc or any other foreign material from the bottom, cover and internal surfaces by scraping using wire brush, draining out the water from the tank and washing internally with water & bleaching powder (0.10 Kg of bleaching powder will be mix in 1 litre water) and again draining out the water from the tank and writing the date of cleaning with white synthetic enamel paint on black background with synthetic enamel paint complete all as directed by Engineer-in-charge.
5
-
-
... More
M&L for Cleaning of HDPE service water tank of capacity upto 2000 litre, and the connected circulating pipes at any position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots etc or any other foreign material from the bottom, cover and internal surfaces by scraping using wire brush, draining out the water from the tank and washing internally with water & bleaching powder (0.10 Kg of bleaching powder will be mix in 1 litre water) and again draining out the water from the tank and writing the date of cleaning with white synthetic enamel paint on black background with synthetic enamel paint complete all as directed by Engineer-in-charge.
10
-
-
... More
Dismantling water tank capacity 500 ltr and taken as credit
1
-
-
... More
Supply and fix 500 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete
1
-
-
... More
Dismantling water tank capacity 1000 ltr and taken as credit
2
-
-
... More
Supply and fix 1000 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete
2
-
-
... More
S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 25 mm bore pipe, screwed for iron pipe and fixed complete all as specified.
20
-
-
... More
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed by the Engineer-in-Charge
10
-
-
... More
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 Sqm but n exc 4.00 Sqm each complete all as specified and as directed by the Engineer-in-Charge.
10
-
-
... More
Taking down shutters of any description n exc 1 sq.m each complete all as specified.
5
-
-
... More
Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.
10
-
-
... More
S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed by Engineer-in-Charge.
20
-
-
... More
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed by Engineer-in-Charge.
12
-
-
... More
S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.
15
-
-
... More
M&L 30mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(b) complete all as specified.
10
-
-
... More
S&F aluminium anodised sections sliding windows shutters with frames comprising Series -C (20mm), 2 track sliding shutters duly fitted with neoprene beading, glazing clips, locking device, 4.8mm thick heat absorbing glass panes complete all as specified and directed. (Note :- Thickness of aluminium section minimum 2mm)
10
-
-
... More
S&F aluminium anodised sections sliding windows shutters with frames comprising Series -C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips, locking device, 4.8mm thick heat absorbing glass panes in 2 shutters and 0.46mm dia SS wire mesh in one shutter complete all as specified and directed. (Note :- Thickness of aluminium section minimum 2mm)
10
-
-
... More
S&F aluminium sections ( conforming to IS) door with frame of size 100mmx 44.45mm wide fabricated with 2mm thick section , double leaf shutter with 44.45mm wide fabricated with 2mm thick section having vertical and top rail 83.50mm, bottom rail and middle rail 115mm and including necessary jointing cleats, screws, neosprene rubber beading, PVC packing, tinted glass panes 4.8 mm nominal thickness complete all as specified and as directed.
20
-
-
... More
M&L for Repairing of existing aluminium door single / double leaf (area of each leaf exc 1 Sqm but n.exc 2.0 Sqm) by taking down old door, tightening of joint, tightening of top & bottom patch, replacement of cleat, screw, oiling and greasing of floor springs, & refixing in same opening for smooth functioning complete all as specified. Note:- Floor door springs where renewed shall be measured and paid separately under appropriate item of BOQ.
15
-
-
... More
S&F 250 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed
20
-
-
... More
S&F 100 mm size butt hinges medium weight (ISI Marked), rolled mild steel complete.
40
-
-
... More
S&F 75mm size butt hinges medium weight (ISI Marked), rolled mild steel complete.
40
-
-
... More
S&F in repairs stainless steel auto closing hinges for cub board shutters all as specifed
50
-
-
... More
S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 200 mm length of bolt complete all as specified.
20
-
-
... More
S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt complete all as specified.
20
-
-
... More
S&F 150 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge
30
-
-
... More
S&F 100 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge
35
-
-
... More
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed.
10
-
-
... More
S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed.
20
-
-
... More
S & F in repair for 150 mm floor door stopper of aluminium alloy body and tonge,anodised with hard drawn steel spring
25
-
-
... More
Hacking out old broken glass, any thickness, size, quality, or description, from frame nexc 1.5 Sqm each pane
20
-
-
... More
S&F for 3.0 mm thick sheet glass ordinary quality and glazing with oil putty nexc 0.5 Sqm each pane
5
-
-
... More
S&F for 3.0 mm thick figured glass ordinary quality and glazing with oil putty n.exc 0.5 Sqm each pane
5
-
-
... More
S&f for 4.8 mm thick sheet glass odinary qulity and glazing with neosprene beading n.exc 0.5 Sqm in each pane
5
-
-
... More
M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
12
-
-
... More
S&F in repairs Aluminium body (extruded section ) body Door closer hydraulically regulated, designation No. 2 , universal type, suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed, complete all as specified and directed.
15
-
-
... More
S&F in repair for 100 mm mild steel mortice lock vertical type with 4 brass lever and duplicate key complete all as specified and directed.
10
-
-
... More
S&F in repair 25 mm Stainless steel curtain rod with stainless steel bracket fancy type as approved by GE, as in curtain rods including taking down the old curtains rods complete all as specified and directed by Engineer-In-Charge.
70
-
-
... More
S&F in repair satinless steel finils, fancy type as approved by GE, for 25 mm curtain rods complete all as specified and directed by Engineer-In-Charge.
30
-
-
... More
S&F in repairs 15 mm size bib tap, with wall glange, long body, cast copper alloy chromium plated, fancy type with capston head, screwed for 15 mm bore iron pipe or for brass ferrule and fixed complete all as specified.
40
-
-
... More
S&F in repairs Brass chromium plated shower rose 80 mm dia without swivel joints, including fixing to steel pipe or union complete all as specified .
10
-
-
... More
S&F in repair 15 mm size Concealed stop cock, cast copper alloy, chromium plated, Reduced body ISI Marked, screwed down, high pressure, with capston head, screwed externally both ends for unions etc. and fixed complete all as specified.
2
-
-
... More
S&F in repair 15 mm size Angle valve, cast copper alloy, chromium plated, fancy type with capstan head, with screwed down, screwed both end for iron pipes complete.
25
-
-
... More
S&F in repair 15 mm size pillar taps, cast copper alloy, chromium plated, fancy type, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.
3
-
-
... More
S&F in repair 15 mm size basin mixer cast copper alloy chromium plated with capstan heads, half turn type, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe with 450 mm braided connection pipe (without pop-up)complete all as specified.
12
-
-
... More
S & F in repairs 15 mm size wall mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, half turn type, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
S&F in repairs 600 mm x 450 mm bevelled edge mirror 5.5 mm thick of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP Brass screws and cup washers complete all as specified.
10
-
-
... More
S&F in repairs CP mild steel gratings suitable for 75 / 100 mm dia NT/ FT complete all as specified.
15
-
-
... More
S&F in repair Tubular towel rail stainless steel chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed by Engineer-in-Charge.
10
-
-
... More
S&F in repair white vitreous China wall hung, rimless bowl with flushing cistern With PP Soft Close Seat cover, Hinges, Dual Flush Cistern Fitting, Accessories Set, fixed in position including all fixing arrangement complete all as specified
3
-
-
... More
S&F in repair white vitreous China wash down water closet pan (padestal pattern), fixed in position with fixing bolts, connection to drain pipe and to flushing pipe, etc., complete.
4
-
-
... More
Supply and fix in repairs 10 Litre capacity PVC symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete.
10
-
-
... More
Supply and fix in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.
15
-
-
... More
S&F in repair PTMT connections 15 mm size with PTMT nuts of length 450 mm complete all as specified.
40
-
-
... More
Supply and fix in repair white vitreous China wash hand basin (Flat back) of size 580 x 450 mm fixed on and including new brackets including 32 mm size brass chromium plated waste coupling, complete.
5
-
-
... More
S&F in repair 32mm bore flexible pipe of PVC fixed to WHB / urinals as waste pipe (not less than 600mm long) including PVC coupling complete all as specified.
50
-
-
... More
S&F in repair 32 mm size waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified.
40
-
-
... More
S&F in repair 15 mm size Gun metal, globe or gate valves, with iron wheel head, screwed both ends for 15 mm bore iron pipe and fixed complete all as specified.
10
-
-
... More
M&L for 18 to 20 mm thick granite (of any type) tiles machine cut & machine polished, set & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including screed bed 20 mm thick in cement mortor 1:4 complete all as specified and directed. Note : Quoted rate shall be deemed to include cast of screed bed.
5
-
-
... More
Demolation of Stone slabs and tiles of any description or thickness in floors, aprons etc lasid bedded pointed in cement mortor zll as specified
10
-
-
... More
M&L for chequered cement concrete tiles of size 30 cm x 30 cm x 20 mm thick, with gray cement and pigment set & jointed with gray cement slurry and pointed with gray cement & pigment laid over and including 20 mm thick screed bed in CM 1:4 as in floors complete all as specified. Note : Quoted rate shall be deemed to include cast of screed bed.
100
-
-
... More
Taking down cement plaster on brick wall, racking out joints hacking for key scrubbing down with water all as specified and directed.
150
-
-
... More
M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete wall surfaces including mixing only water proofing compound as per manufacturers instruction and finishing the surface even and smooth without using extra cement complete all as specified.
Note:- Waterproofing compound will be measured and paid seperatly.
100
-
-
... More
M&L for Rendering 10 mm thick in cement and sand mortar 1:6 on brick work or cement concrete wall surfaces including finishing the surface even and smooth without using extra cement complete all as specified.
40
-
-
... More
M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement.
10
-
-
... More
M&L for preparation of newly plastered surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying two coats of cement base paint over one coat of primer in camouflage pattern, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.
50
-
-
... More
M&L for preparing new plastered surfaces, of ceiling and applying three coats white wash all as specified and directed.
10
-
-
... More
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper (first Quality) over one coat of primer over and including 3 mm thick cement base wall care putty complete all as specified and directed by Engineer-in-charge.
40
-
-
... More
M&L for complete removal of existing treatment of wall / roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour and applying 2 mm thick wall care putty, two coats of oil bound distemper (first Quality) of any tint / shade over one coat primer complete all as specified and directed.
200
-
-
... More
M&L for Preparation of old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of oil bound distemper (first Quality) after removal of nails & filling nail hole with putty complete all as specified and directed by Engineer-in-charge.
10000
-
-
... More
M&L for Preparation of old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying two coats of oil bound distemper (first Quality) after removal of nails & filling nail hole with putty complete all as specified and directed by Engineer-in-charge.
1000
-
-
... More
M&L for Preparation of old decorated surfaces of ceiling, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of oil bound distemper (first Quality) after removal of nails & filling nail hole with putty complete all as specified and directed by Engineer-in-charge.
1500
-
-
... More
M&L for Preparation of old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of cement base paint after removal of nails & filling nail hole with putty complete all as specified and directed by Engineer-in-charge.
1500
-
-
... More
M&L for preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, and applying one coat of synthetic enamel paint (first Quality) complete all as specified and directed by Engineer-in-Charge
800
-
-
... More
M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping holes and applying one coat of synthetic enamel paint (first Quality) complete all as specified and directed by Engineer-in-Charge
500
-
-
... More
Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries from site.
51
-
-
... More
M&L premium / 1st quality coloured glazed ceramic tiles (digital printed) (joint free / edge cut) in vertical surfaces of size 300 mm x 450 mm x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, laid over and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed by Engineer-in-Charge. Note : Quoted rate shall be deemed to include cast of backing coat.
15
-
-
... More
M&L for premium / 1st quality non skid ceramic coloured tiles (edge cut / Joint free) of size 300 mm x 300 mm x 7-8 mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles laid over and including 15 mm thick screed in CM 1:6 complete all as specified and directed by Engineer-in-Charge. Note : Quoted rate shall be deemed to include cast of screed bed.
16
-
-
... More
M&L for premium / 1st quality coloured vitrified ceramic tiles (Double charged), 8-10 mm thick (square) polished, area of each tiles n.exc 0.36 sqm as in floors etc set and jointed in neat cement slurry and pointed in light white or coloured cement and pigment to match the tiles laid over and including 15 mm thick scree bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge. Note : Quoted rate shall be deemed to include cast of screed bed.
20
-
-
... More
Demolition of existing roof treatment of any type
50
-
-
... More
M&L for 15 mm thick screed plaster on RCC slab in CM 1:4 including mixing only water proofing compound as per manufacturers instruction and finishing the surface even and smooth without using extra cement complete all as specified. Note:- Waterproofing compound will be measured and paid seperatly.
50
-
-
... More
M&L for water proofing treatment on roof surfaces in the following manner:-
(a) The surfaces shall be painted with hot bitumen grade 30/40 confirming to IS-73 @ 1.20 kg / sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 ltr /sqm.
(b) Supply & lay 3 mm thick APP water proofing membrane reinforced with non woven polyester matt laid using butane torch by torch application with a side lap of 10 cm & 15 cm end lap weighing not less than 3.5 kg / sqm. Note: - (i) Work to be carried out through authorised applicators of the manufactures and work will be carried out in complete / in patches in roofs
(ii) Contractor shall submit written guarantee of 07(Seven) years from date of completion & submit security deposit @ 2.5% of executed amount or Rs 6250.00 which ever is more.
50
-
-
... More
M&L for applying two coats of aluminium paint over APP membrane including preparation of surfaces and over one coat primer.
50
-
-
... More
Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, bell, bell push, light fitting etc and making good disturbed surfaces of walls, floors,etc.as directed.
61
-
-
... More
Material & Labour for concealed point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn existing concealed PVC conduit, including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable of green colour as a earth wire connected to common earth dolly, etc including pressed steel sunken type terminal box up to 8 module suitable for modular switch complete.
Note:- Modular type cover plate & frame will be measured & paid separately
24
-
-
... More
All as per Item No 105 above but for call bell point ontrolled by one bell push on independent board.
6
-
-
... More
All as per Item No 105 above but for one 5 Amp socket outlet point on the same board with other switch controlled.
5
-
-
... More
All as per Item No 105 above but for one 5 Amp socket outlet point on an independent board.
12
-
-
... More
All as item No 105 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board.
14
-
-
... More
S&F modular white cover plate with frame, 1 module,
6
-
-
... More
S&F modular white cover plate with frame, 3 module,
5
-
-
... More
S&F modular white cover plate with frame, 6 module,
4
-
-
... More
S&F modular type one way switch, 6 Amp 240 volt in one moduel including connecting complete as specified and directed.
60
-
-
... More
S&F modular type 6 Amp 5 pin universal socket in two moduel , 240 volts including connecting complete all as specified and directed.
60
-
-
... More
S&F modular type one way switch, 16 Amp 240 volt in one moduel including connecting complete as specified and directed.
50
-
-
... More
S&F modular type 6 / 16 Amp 5 pin universal socket suitable in two moduel , 240 volts including connecting complete all as specified and directed.
50
-
-
... More
S&F modular type one way bell push, 6 Amp 240 volt in two moduel including connecting complete as specified and directed.
10
-
-
... More
S&F in replacement of switch piano flush type (ISI marked), single pole, one way 6 Amp, 240 Volts complete all as specified and as directed.
15
-
-
... More
S&F in replacement of switch piano flush type (ISI marked), single pole, one way 16/15 Amps, 240 Volts including complete all as specified and as directed.
20
-
-
... More
S&F in replacement of socket outlet 3 pin, 6 Amp piano flush type including complete all as specified and as directed.
20
-
-
... More
S&F in replacement of socket outlet, 2 in 1, 3/5 pin 6 / 16 Amp, piano flush type complete all as specified and as directed
15
-
-
... More
S&F in replacement of bell push 5 / 6 Amps SP flush type complete all as specified and as directed.
10
-
-
... More
Supply & fix modular fan regulator 100 / 100 W, in 2 Module for ceiling fan and connecting as directed.
30
-
-
... More
S&F ceiling rose polycarbonate body surface type three terminal complete as directed.
10
-
-
... More
Supply and Fix in repair LED lamp 10 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min), fixed in position complete..
40
-
-
... More
Supply and Fix in repair LED lamp 15 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min), fixed in position complete..
30
-
-
... More
Supply and fix in repair wall / surface mounting luminaires integrated LED Batten (4 feet) 20 W, 6500 K, 230V , system efficiency not les than 100 lumens / watt, with extruded aluminium housing with frosted PMMA / PC diffuser & integrated electronic driver fixed in position and connecting with ceiling rose complete all as per specified and directed by Engr-in-charge.
60
-
-
... More
Supply and fix in repair batten sutaible for 20 watt LED retrofit tube rod 1200 mm (approx) long, having both end bibin holder, internaly prewired, fixed to existing fitting complete all as directed.
50
-
-
... More
Supply and fix in repairs recess type 36 watt LED llight fittings of size 600 mm x 600 mm, made of CRCA powder quoted housing, fully covered by PMMA acrylic Lumio Diffuser, LED Used shall be SMD type, fixed in 15 feet hight false ceiling of any pattern / material by cutting opening of sutable size, including electrical connection all as specified and directed.
12
-
-
... More
S&F in repair LED Building security light 35 Watt with high power LED source, system efficency not less than 110 lumen / watt), aluminium die casted housing, built in electronic driver, IP65 and IK 07 with 4 KV inbuilt surge protection including electrical connection with PVC three core copper conductor cable of size 1.5 sqmm, & all necessary fixing accessories, all as specified and directed by Engr-in-charge.
5
-
-
... More
S&F for batten angle lamp holder insulated body with back plate suitable for batten fittings complete all as specified and as directed.
10
-
-
... More
S&F Ding dong sound door call bell electric AC 240 volt, 50 Hz ding dong type including taking down unserviceable complete all as specified and as directed.
5
-
-
... More
Material & Labour for concealed sub main wiring with 2 run single core multistranded copper conductor cable, of size 6.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke, drawn through and including heavy duty rigid PVC conduit not less than 25 mm dia with all necessary fitting and including one run single core multistranded copper conductor cable, of size 6.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire in green colour, fixed on wall / ceiling, including taking down old sub main wiring complete. Note: (i) 2 Runs of main cable and one run earth wire with conduit will be measured as one Unit for payment.
40
-
-
... More
Material & Labour for concealed sub main wiring with 2 run single core multistranded copper conductor cable, of size 4.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke, drawn through and including heavy duty rigid PVC conduit not less than 25 mm dia with all necessary fitting and including one run single core multistranded copper conductor cable, of size 4.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire in green colour, fixed on wall / ceiling, including taking down old sub main wiring complete. Note: (i) 2 Runs of main cable and one run earth wire with conduit will be measured as one Unit for payment.
50
-
-
... More
S&F in repair distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper busbar, neutral bar, earth bar, IP 43 protection, single pole and neutral 250 Volts, fixed flush to wall complete all as specified and directed.
2
-
-
... More
S&F in repair distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 12 way with 200 Amps rated copper busbar, neutral bar, earth bar, IP 43 protection, single pole and neutral 250 Volts, fixed flush to wall complete all as specified and directed.
2
-
-
... More
S&F in repairs VTPN distribution board, 4 way double door suitable for incommer 4 pole MCCB, 415 V & SP / TP MCB as outgoing, 200 Amps rated Busbar, inter connection link, cable ties, earth bar etc incl necessary civil works and electrical connections with suitable lugs / spreader links complete all as specified and directed by Engr-in-charge. Note: MCCB & MCB to be measured and paid seprately.
2
-
-
... More
S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
12
-
-
... More
S&F MCB, single pole & neutral 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
15
-
-
... More
S&F MCB, triple pole & neutral 63 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
10
-
-
... More
S&F MCCB 125 Amps 415 volts, 4 pole 16 KA breaking capacity fixed in DB and connecting complete as directed.
1
-
-
... More
S&F MCCB 100 Amps 415 volts, 4 pole 16 KA breaking capacity fixed in DB and connecting complete as directed.
1
-
-
... More
Supply and fix four pole Isolator 100 Amps.
15
-
-
... More
S&F in replacement PVC gang box sutaible for 15 A switch & socket fixed with pvc gitties and screws all as specified and as directed.
20
-
-
... More
Supply and fix Metallic Top three pin, 20 Amps, for AC (As per existing size)
10
-
-
... More
M&L for overhauling of ceiling fan of any Make and sweep including dismantling, cleaning internally and externally, oiling, greasing, checking of electric connections, replacement of worn out check nuts, split pins, nuts, bolts and washers, sockets rebber real, clamps and minor repairing works and items etc. reassembling and testing on completion all as directed. Note :- rewinding works whereever required will be measured & paid seperatly.
6
-
-
... More
M&L for overhauling of exhaust fan of any Make and sweep including dismantling, cleaning internally and externally, oiling, greasing, checking of electric connections, replacement of worn out check nuts, split pins, nuts, bolts and washers, sockets rebber real, clamps and minor repairing works and items etc. reassembling and testing on completion all as directed. Note :- rewinding works whereever required will be measured & paid seperatly.
5
-
-
... More
M & L for rewinding of ceiling fan 1400 mm sweep of any make by dismantling the ceiling fan, removing the burnt winding, cleaning slot, replacement of defective nut bolts washer etc and rewinding with using appropriate size of super enamelled copper winding wire thermal class-E, including varnishing and reassembling and testing complete all as directed by the Engineer-in-Charge
5
-
-
... More
M & L for rewinding of exhaust fan 300 mm sweep of any make by dismantling the ceiling fan, removing the burnt winding, cleaning slot, replacement of defective nut bolts washer etc and rewinding with using appropriate size of super enamelled copper winding wire thermal class-E, including varnishing and reassembling and testing complete all as directed by the Engineer-in-Charge
4
-
-
... More
M & L for rewinding of exhaust fan 250 mm sweep of any make by dismantling the ceiling fan, removing the burnt winding, cleaning slot, replacement of defective nut bolts washer etc and rewinding with using appropriate size of super enamelled copper winding wire thermal class-E, including varnishing and reassembling and testing complete all as directed by the Engineer-in-Charge
4
-
-
... More
M & L for rewinding of wall mounted fan 300 / 350 mm sweep of any make by dismantling the ceiling fan, removing the burnt winding, cleaning slot, replacement of defective nut bolts washer etc and rewinding with using appropriate size of super enamelled copper winding wire thermal class-E, including varnishing and reassembling and testing complete all as directed by the Engineer-in-Charge
2
-
-
... More
Supply and fix in replacement steel ball bearing (6201ZZ) to ceiling / exhaust fan complete all as specified and directed.
4
-
-
... More
Supply and fix in replacement steel ball bearing (6202ZZ) to ceiling / exhaust fan complete all as specified and directed.
5
-
-
... More
Supply and fix in replacement steel ball bearing (6203ZZ) to ceiling / exhaust fan complete all as specified and directed.
5
-
-
... More
Supply and fix in replacement condensor 2.5 MFD to ceiling fan
20
-
-
... More
Supply and fix in replacement condensor 4 MFD to exhaust fan
5
-
-
... More
Supply and fix in replacement Gun metal bush for ceiling fan or exhaust fan all as directed.
5
-
-
... More
Supply and fix in replacement shaft suitable for any make of ceiling fans and exhaust fans all as directed.
5
-
-
... More
Taking down old detiorated, rusted out lived and unsv ceiling fan, supply & fix new ceiling fan 1200 mm sweep, BLDC copper wound motor, AC single phase, 230 volts, white colour complete with fan blade, down rod, canopy and provn of connection with three core flexible copper wire cable of size 1.50 sqmm from ceiling rose to fan, writing of MES Nos as approved size of letter complete all as specified and directed.
12
-
-
... More
Taking down detiorated, rusted out lived and unsv exhaust fan, supply & fix new exhaust fan metal body 300 mm sweep, 900 RPM, copper bound motar, AC 230 volts, single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing, writing of MES Nos as approved size of letter complete all as specified and directed.
10
-
-
... More
Taking down detiorated, out lived and unsv fresh air ventilator fan, supply & fix new 250 mm sweep fresh air ventilator fan, PVC body & PVC blade, 230 Volt, 50Hz, single phase AC supply, with PVC louvers fixed in position and connecting with ceiling rose, writing of MES Nos as approved size of letter complete all as specified and directed.
10
-
-
... More
Taking down detiorated, rusted out lived and unsv wall mounting fans and supply and fix wall mounted fan 450 mm sweep (white) string controlled oscillating type with all accessories as per manufacturer norms fixed in position and connecting, complete as specified and directed by EIC
8
-
-
... More
Taking down detiorated, rusted out lived and unsv water heater and Supply and fix water heater (Geyser) storage type 25 Ltr capacity (5 Star BEE rating) including PVC connections 15 mm size for hot and cold water and 3 core copper cable with plug top 15 Amp AC 230 V fixing on existing wall complete all as specified and directed. Note:- Geyser will be fitted with fastners-04 Nos including bolts washers etc and making good disturbed surface.
2
-
-
... More
S&F service connection with twin core 6 Sqmm 240 volt heavy duty un armured PVC insulated solid aluminium conductor cable served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than one metre apart including 4 mm GI supporting wire of suitable size in replacement of old unseriveable conductor cable complete.
90
-
-
... More
S&F service connection with twin core 10 Sqmm 240 volt heavy duty un armured PVC insulated solid aluminium conductor cable served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than one metre apart including 4 mm GI supporting wire of suitable size in replacement of old unseriveable conductor cable complete.
110
-
-
... More
S&F service connection with twin core 16 Sqmm 240 volt heavy duty un armured PVC insulated solid aluminium conductor cable served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than one metre apart including 4 mm GI supporting wire of suitable size in replacement of old unseriveable conductor cable complete.
100
-
-
... More
Supply and fix in replacement electronic constant current drivers / PCB / electronic gear suitable for 45 to 90 Watt LED flood light / street light fitting including taking out old unserviceable all as specified and directed .
2
-
-
... More
Supply and fix in replacement electronic constant current drivers / PCB / electronic gear suitable for 120 to 150 Watt LED flood light / street light fitting including taking out old unserviceable all as specified and directed .
3
-
-
... More
Supply and fix in replacement electronic constant current drivers / PCB / electronic gear suitable for 200 Watt LED flood light / street light fitting including taking out old unserviceable all as specified and directed .
2
-
-
... More
Supply & fix / connecting and testing of 3 core, 1.5 Sqmm PVC insulated and PVC round sheathed` copper conductor (flexible ) industurial cable, 1100 Volts conforming to IS 694, drawn through steel tubular poles from Junction box to street light fitting including providing suitable copper lugs all as specified and directed by Engr-in-charge.
110
-
-
... More
Supply and fix in replacement of 45 W LED Street light fitting having epoxy powder coated pressure die cast aluminium housing front cover with polycarbonate lens, with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant.IP lens for better distribution . street light should have IP 66 protection and impact resistance of IK 07 , Lumen efficiency of LED not less than 100_ lumen per watt system efficency ,power factor 0.95, THD10% at Full load CRI 70% ,Street light should have built in potted IP 66 electronic LED driver with APFC, lower THD, open circuit protection , over voltage protection , surge voltage protection 5KV in built & 10KV SPD , and provided with company LOGO ingraved on housing of the Street light complete including taking down of old UNSV fittings all as specified and directed by Engr -in-Charge.
Note :-The contractor should take approval of techincal specification of luminaries and driver from department before procurement .
8
-
-
... More
Supply and fix in replacement of 60 W LED Street light fitting having epoxy powder coated pressure die cast aluminium housing front cover with polycarbonate lens with silicon gasket, with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant.IP lens for better distribution and toughened glass fixed to housing with screws , street light should have IP 66 protection and impact resistance of IK 07 , Lumen efficiency of LED not less than 110_ lumen per watt system efficency ,power factor 0.95, THD10% at Full load CRI 70% ,Street light should have built in potted DriverTHD, open circuit protection , over voltage protection , surge voltage protection 5KV in built & 10KV SPD , and provided with company LOGO ingraved on housing of the Street light complete including taking down of old UNSV fittings all as specified and directed by Engr -in-Charge.
Note :-The contractor should take approval of techincal specification of luminaries and driver from department before procurement .
6
-
-
... More
Supply and fix in replacement of 90 W LED Street light fitting having epoxy powder coated pressure die cast aluminium housing front cover with polycarbonate lens with silicon gasket, with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant.IP lens for better distribution and toughened glass fixed to housing with screws , street light should have IP 66 protection and impact resistance of IK 07 , Lumen efficiency of LED not less than 110_ lumen per watt system efficency ,power factor 0.95, THD10% at Full load CRI 70% ,Street light should have built in potted Driver THD, open circuit protection , over voltage protection , surge voltage protection 5KV in built & 10KV SPD , and provided with company LOGO ingraved on housing of the Street light complete including taking down of old UNSV fittings all as specified and directed by Engr -in-Charge.
Note :-The contractor should take approval of techincal specification of luminaries and driver from department before procurement . .
16
-
-
... More
Supply and fix in replacement of 120 W LED flood light fitting having epoxy powder coated pressure die cast aluminium housing front cover with polycarbonate lens with silicon gasket, with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant.IP lens for better distribution and toughened glass fixed to housing with screws , flood light should have IP 66 protection and impact resistance of IK 07 , Lumen efficiency of LED not less than 110_ lumen per watt system efficency ,power factor 0.95, THD10% at Full load CRI 70% ,Street light should have built in potted IP 66 electronic LED potted driver with open circuit protection , over voltage protection , surge voltage protection 5KV in built & 10KV SPD and provided with company LOGO ingraved on housing of the flood light complete including taking down of old UNSV fittings all as specified and directed by Engr -in-Charge.
Note :-The contractor should take approval of techincal specification of luminaries and driver from department before procurement
8
-
-
... More
Supply and fix in replacement LED bollard light fitting 60 cm long, 10-12 watt, LED, having epoxy powder coated pressure die cast aluminium housing Light optic / Diffuser - High impact polycarbonate / Optic colour temprature 5700K CRi70,THD10% PF .90 surge protection 4KV inbuilt, Rated voltage and frequency 240 Volt, 50 Hz street furniture with touch if aesthetic innovative design with uniformly light diffuser at the upper portion acts as beam of path guidance in a landsscape IP 65 environmental complete with foundation work nut, bolt and washer etc complete all as specified and directed by Engr in Charge.
4
-
-
... More
Supply and fix in replacement LED Post top light fitting, energy saving 240V,50Hz AC, environmental friendly, aesthetically designed electronic constant current, IK07, having epoxy powder coated pressure die cast aluminium housing Top cover spun Al sheet powder coated,front cover Clear acrylic diffuser with indirect symmetrical light distributio, IP-65 luminaire with high power LED as light source of capacity 40 Watt, 5700K PF 0.9, THD10% and light efficiency 85_ ,CRI 70,Surge protection 5KV incl dismentling taking down unsv fitting any type all as specified and directed.
30
-
-
... More
Supply and fix in replacement security light Bracket made out of galvanised steel light grade pipe of 40 mm dia 1.5 mtr long bend to an angle of 120 degree with 02 Nos clamp made out of 50 mm x 5 mm flat iron and 06 sets of nuts, bolts and washers painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
8
-
-
... More
Supply and fix in replacement street light junction box of suitable size for three phase cable connection outdoor type, weather proof, factory made out of PVC sheet 1.8 mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and out going cable/wire complete comprising with the followings :- (a) Bus bar with four aluminium strips, 100 Amps capacity insulated with insulators, including colour coding strip, including PVC cable of suitable size from bus bar to MCB (b) MCB SPN 5 to 30 Amps - 01 No (c) Clamps made out of 40mm x 5mm flat iron duly welded with nuts & bolts complete all as specified and directed.
10
-
-
... More
Supply and install & erect in true vertical position, steel tubular swaged pole type 410 SP - 31 (9 mtr long) complete with MS base plate of size 300 x 300 x 6mm thick at bottom, welded at the centre with through hole of 14mm dia at a height of 300 mm above the coping finial cap and painted with two coats of aluminium paint over a coat of red oxide primer with writing number including excavation up to required depth and PCC type C-2 1:3:6 (using 40mm graded) at bottom and PCC type B-1 1:2:4 (20mm graded) for mass filling and pole coping (60x60x30cm) and rendering of coping with 5 mm thick in 1:3 cement mortar complete all as specified and directed.
2
-
-
... More
M&L for cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in coping to electric pole and the like, weathering, slightly rounded or chamfered angles including necessary form work and dismentling of old coping complete.
1
-
-
... More
Excavation in trenches not exc. 1.5 m wide and not exc 1.5 mtr deep in soft / loose soil for laying / taking up / taking down of cables and getting out and levelling of bottom suface to required level all as specified and directed by Engineer- in- Charge.
120
-
-
... More
Removing excavated soil from site to a distance n. exc 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr above the starting point all as specified and directed by Engineer-in-Charge.
63
-
-
... More
Returning filling in, including spreading, levelling, watering and well ramming soil in layers not exceeding 25 cm thick all as specified and directed.
57
-
-
... More
Supply, laying jointing and testing LT UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured IS 7098 marked, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core, laid in trench / laid under floor or fixed naked with wall / on wall / in ducts / in GI pipes etc. with and includings MS Clamps, nuts,bolts,washers complete all as specified and directed. Note- Excation, earth works, and sand cushioning, protection bricks and pipe will be measured and paid seprately under given items.
90
-
-
... More
All as per item No 184 above but LT UG cable of size 16 Sqmm 4 core.
100
-
-
... More
All as per item No 184 above but LT UG cable of size 35 Sqmm 3.5 core.
130
-
-
... More
All as per item No 184 above but LT UG cable of size 70 Sqmm 3.5 core.
90
-
-
... More
All as per item No 184 above but LT UG cable of size 95 Sqmm 3.5 core.
110
-
-
... More
All as per item No 184 above but LT UG cable of size 120 Sqmm 3.5 core.
130
-
-
... More
All as per item No 184 above but LT UG cable of size 240 Sqmm 3.5 core.
60
-
-
... More
M&L for 40 mm bore mild steel galvanised water tubing, light grade with all fittings and fixed to walls or laid on floors / fixed to poles / or passing under road crossing, for protection of UG cable including taking down old tubing complete all as specified and directed by Engr-in-Charge.
12
-
-
... More
M&L for 50 mm bore mild steel galvanised water tubing, light grade with all fittings and fixed to walls or laid on floors / fixed to poles / or passing under road crossing, for protection of UG cable including taking down old tubing complete all as specified and directed by Engr-in-Charge.
12
-
-
... More
M&L for 80 mm bore mild steel galvanised water tubing, light grade with all fittings and fixed to walls or laid on floors / fixed to poles / or passing under road crossing, for protection of UG cable including taking down old tubing complete all as specified and directed by Engr-in-Charge.
9
-
-
... More
M&L for providing dry river sand as in sand cushioning below and above cable thickness as specified in SSR to under ground cable including punning down of sand in layer all as specified and directed by Engg-in-Charge.
Note: for measurement purpose punned thickness of sand will be consider.
48
-
-
... More
Supply and Laying of bricks well burnt sub class B (old size) laid flat for cable protection width equal to the length of bricks complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
Deployment of tools & manpower for Boring of hole under road / pavement / hard standing or any other situation by manual means suitable for passing of 40 to 80 mm bore pipe and making good both ends all specified and directed
18
-
-
... More
S&F Cable jointing kit for 1100 V (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 25 to 50 sqmm XLPE armoured aluminium conductor .
1
-
-
... More
S&F Cable jointing kit for 1100 V (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 70 to 95 sqmm XLPE armoured aluminium conductor
2
-
-
... More
S&F Cable jointing kit for 1100 V (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 120 to 150 sqmm XLPE armoured aluminium conductor
2
-
-
... More
S&F Cable jointing kit for 1100 V (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 185 to 240 sqmm XLPE armoured aluminium conductor
2
-
-
... More
Disconnecting all existing electric connection from panel taking out unserviceable MCCB and cable from LT panel Board and fixing connecting and testing of MCCB 63 Amps 3 pole 25 KA 415 Volt 50 Hz with spreader with suitable size of cable lugs / thimble complete including all electric connection with making good . All as specified and directed by Engr in charge.
4
-
-
... More
Disconnecting all existing electric connection from panel taking out unserviceable MCCB and cable from LT panel Board and fixing connecting and testing of MCCB 100 Amps 4 pole 25 KA 415 Volt 50 Hz with spreader with suitable size of cable lugs/thimble complete including all electric connection with making good . All as specified and directed by Engr in charge.
2
-
-
... More
Disconnecting all existing electric connection from panel taking out unserviceable MCCB and cable from LT panel Board and fixing connecting and testing of MCCB 125 Amps 4 pole 25 KA 415 Volt 50 Hz with spreader with suitable size of cable lugs/thimble complete including all electric connection with making good . All as specified and directed by Engr in charge.
3
-
-
... More
Disconnecting all existing electric connection from panel taking out unserviceable MCCB and cable from LT panel Board and fixing connecting and testing of MCCB 250 Amps 4 pole 25 KA 415 Volt 50 Hz with spreader with suitable size of cable lugs/thimble complete including all electric connection with making good . All as specified and directed by Engr in charge.
3
-
-
... More
Disconnecting all existing electric connection from panel taking out unserviceable MCCB and cable from LT panel Board and fixing connecting and testing of MCCB 400 Amps 4 pole 25 KA 415 Volt 50 Hz with spreader with suitable size of cable lugs/thimble complete including all electric connection with making good . All as specified and directed by Engr in charge.
2
-
-
... More
M&L for earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately).
2
-
-
... More
M&L for Preparation of old painted surfaces of LT steel tubular pole 9 mtrs long and applying two coats aluminium paint from bottom to top and painting up to 1.5 mtr height from top of PCC coping with synthetic enamel paint one coat in black and Yellow / white alternate strip including re writing pole numbering in 8 cm height with one coat synthetic enamel paint complete all as specified & directed by Engineer –in-Charge.
30
-
-
... More
Supply & fixing in replacement automatic street light timer panel 6 KW switch using Infrared Sensor based for automatic switching of street lights based on LUX level of natural light. Required illuminance for switching ON is 30 Lux and for switching OFF 10 Lux level. The sensor (nature switch) alongwith suitable power contactors, Input (supply) MCB and output (load) MCB(s), support terminals should be enclosed in pole/ wall mountable enclosure made of rust proof, electric shock proof, termite proof and FR graded SMC junction box conforming to IP-54 degree of protection including mounting bracket, cable glands, openable doors with lock complete all as specified & directed by Engr-in-Charge.
2
-
-
... More
S&F 25 mm bore mild steel galvanised iron tubing medium grade, ISI Marked conforming to IS 1239 Part-I 2004, including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. laid in trenches / road crossing etc, including taking down old unserviceable tubing complete all as specified and directed.
15
-
-
... More
S&F 40 mm bore mild steel galvanised iron tubing medium grade, ISI Marked conforming to IS 1239 Part-I 2004, including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. laid in trenches / road crossing etc, including taking down old unserviceable tubing complete all as specified and directed.
10
-
-
... More
S&F 50 mm bore mild steel galvanised iron tubing medium grade, ISI Marked conforming to IS 1239 Part-I 2004, including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. laid in trenches / road crossing etc, including taking down old unserviceable tubing complete all as specified and directed.
10
-
-
... More
S&F 80 mm bore mild steel galvanised iron tubing medium grade, ISI Marked conforming to IS 1239 Part-I 2004, including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. laid in trenches / road crossing etc, including taking down old unserviceable tubing complete all as specified and directed.
15
-
-
... More
S&F 100 mm bore mild steel galvanised iron tubing, with and including MS flange medium grade, ISI Marked conforming to IS 1239 Part-I 2004, including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. laid in trenches / road crossing etc, including flange jointing with rubber packing & nut, bolt washer, including taking down old unserviceable tubing complete all as specified and directed.
20
-
-
... More
S&F in repair 15 mm size Gun metal gate valve ISI marked with iron wheel head screwed both ends, conforming to IS, complete, all as specified and directed by Engr-In-Charge.
3
-
-
... More
S&F in repair 20 mm size Gun metal gate valve ISI marked with iron wheel head screwed both ends, conforming to IS, complete, all as specified and directed by Engr-In-Charge.
3
-
-
... More
S&F in repair 25 mm size Gun metal gate valve ISI marked with iron wheel head screwed both ends, conforming to IS, complete, all as specified and directed by Engr-In-Charge.
3
-
-
... More
S&F in repair 40 mm size Gun metal gate valve ISI marked with iron wheel head screwed both ends, conforming to IS, complete, all as specified and directed by Engr-In-Charge.
3
-
-
... More
Disconnecting / unscrewing coupling for 5 to 10 HP pump set and seperating pump and motor, disconnecting all water connections from pump including suction and discharge pipe line and taking out the pump from base frame, transporting to workshop to carry out the necessary repairs and took back after repairs, installing on existing location making all the connections carefully, commissioning and testing at site to the entire satisfaction of the Engr-in-Charge. Note: All the Spares / parts / job repairs required to be replaced shall be measured and paid seperately as under :-
1
-
-
... More
Supply & fix in repair Coupling Set suitable for 5 to 10 HP Pumpping set.
1
-
-
... More
Supply & fix in repair gun metal impeller suitable for 5 to 10 HP Pumpping set.
1
-
-
... More
Supply & fix in repair gun metal Bush suitable for 5 to 10 HP Pumpping set.
2
-
-
... More
Supply & fix in repair Gland Sleeve suitable for 5 to 10 HP Pumpping set.
2
-
-
... More
Supply & fix in repair body Neck ring gun metal suitable for 5 to 10 HP Pumpping set.
4
-
-
... More
Supply & fix in repair Pump shaft stainless steel suitable for 5 to 10 HP Pumpping set.
2
-
-
... More
Supply & fix in repair Counter Plate stainless steel suitable for 5 to 10 HP Pumpping set.
1
-
-
... More
Supply & fix in repair Diffuser Packing suitable for 5 to 10 HP Pumpping set.
2
-
-
... More
Supply & fix in repair Impeller brazing machining and reboring suitable for 5 to 10 HP Pumpping set.
2
-
-
... More
Supply & fix in repair New Key way of impeller disc suitable for 5 to 10 HP Pumpping set.
2
-
-
... More
Supply & fix in repair Diffuser outer dia brazing and machining suitable for 5 to 10 HP Pumpping set. Note:- For Srl item Nos 01 to 229 of BOQ Before carrying out the repairs it should be ensured that the total repair cost of each item shall not exceed 50% of its procurement cost. Note :- Brochures and Phamphelets of each item replaced shall be submitted and kept in safe custody of Engineer in Charge and recods shall be maintained so that items could be replaced during any defect noticed during warranty/Guarantee specified against each product.
1
-
-
... More
Supply, installing, testing and commissioning in replacement factory made CPRI approved powder coated LT Panel board (Dimention of Cubical / enclosure not less than 1400 mm x 1200 mm x 500 mm) ,cubical compartmentalized , out door type double door, plate form mounted, suitable for 415 volts, 3 phase, 4 wire, 50 Hz AC supply system having bus bar chamber with insulated aluminium bus bars four pole installed on porcelain / SMC insulator. The panel shall be dust and vermin proof IP-54 class protection and outer shell made of of 3.00 mm CRCA MS sheet, inner shell made of 2.0 mm thick CRCA MS sheet, 50 x 50 x 6 mm thick MS angle iron frame work, the cubical have bottom channel of size 75 x 40 mm overall powder coated, front and rear opening type, with apron for cable entry closing locking arrangement including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked, 1100 volts grade of appropriate size ( but not less than 2.5 Sqmm) and comprising of the following :-
1
-
-
... More
(a) Incoming :-
(i) MCCB 4 pole , 630 Amps,50 Hz,415 Volts, 36 KA, with thermal magnetic release - 01 Nos
(ii) Digital VAF+PF meter with RS 485 CL1 -01No (iii) CTs ratio 800/5 A ,class 1, ISI marked -01 sets of three (iv) Indicating lamp- 01 set of three
(v) Four Pole , Aluminium bus bar 1200 Amps insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size “F” class insulators.
-
-
-
... More
(b) Outgoing
(i) MCCB 4 pole , 250 Amps,50 Hz,415 Volts, 25 KA thermal magnetic release - 03 Nos
(ii) MCCB 4 pole , 400 Amps,50 Hz,415 Volts, 25 KA thermal magnetic release - 01 Nos
(iii) MCCB 4 pole , 150 Amps,50 Hz,415 Volts, 25 KA thermal magnetic release - 01 Nos
-
-
-
... More
(c)- Platform of Panel. Platform for the panel with PCC 1:4:8 type D-2 with 40 mm graded crushed stone, 15 cm thick in foundation, brick work in CM 1:6 with sub class 'B', old size bricks, rendering 15 mm thick in CM 1:6 on exposed surfaces and 100 mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel. The platform shall be such that it is of a height 45 cm above the nearest road level.
-
-
-
... More
Note :-
(i) All out going feeder shall be connected by cable through suitable size gland plate / glands. (ii) The various feeders shall be indicated by 50 mm size letters in synthetic enamel white paint. (iii) All MCCB with adjustable protection for over load and short circuit and conforming to IEC60947-II/IS 13947-II (Latest Version). The MCCB should have Ics=100%Icu. The MCCBs shall have spreader links and barriers as standard feature of manufacturer
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements