Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Eprocure
Opening Date26 Nov 2024
Closing Soon1 Jan 2025
Tender Amount₹ 5,80,00,000
Costs
EMD
₹ 6,15,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_685783_1Tender No
CEFBZ/MRT/T-28 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&L brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified & directed.
13.25
-
-
... More
Demolition of cement concrete of ground floor n exc 15 cm thickness(below or above ground level) complete all as specified & directed.
57.89
-
-
... More
Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.
7301.58
-
-
... More
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified & directed.
395.6
-
-
... More
M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cement to match including 15 mm thick screed bed in cm 1:6 complete all as specified & directed.
729.6
-
-
... More
S&F double charge anti skid vetrified coloured tiles 7 to 8 mm (square/ rectangular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed.
2974.76
-
-
... More
All as per item No 9.00 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
327.22
-
-
... More
S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x350x7mm/350x250x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete all as specified & directed.
3270
-
-
... More
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc. complete all as specified & directed.
63.86
-
-
... More
M&L for 16-18mm thick black granite stone slab machine cut in cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding, bullnosing and polishing complete all as specified & directed.
336
-
-
... More
M&L for 16-18mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding, complete all as specified & directed.
17.6
-
-
... More
M&L machine cut prepolished kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing, bullnosing and polishing upto Granite finish complete over 15mm thick screed bed in CM 1:6 complete all as specified & directed.
240
-
-
... More
All as per item No 15 above but factory made bull nosed as in riser of steps, skirting/dadolaid over 10mm thick in cm 1:4 complete all as specified & directed.
45
-
-
... More
Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed.
520
-
-
... More
Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each complete all as specified & directed.
440
-
-
... More
S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Rates inclusive ofM.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.
782.4
-
-
... More
S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Rates inclusive of M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.
1922.4
-
-
... More
S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising (including 01 Nos eye viewer/ magic eye at entrance main door with necessary fittings) of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
602.4
-
-
... More
S&F factory made gauzed shutter made out of iron U frame 35mmX35mmX5mm and 25mm X25mm X5mm and 1.5 mm thick, 10mm square bars grills with stainless steel fly proof wire mesh having stainless steel 0.5mm nominal dia wire and 1.20 mm average width of aperture including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
352
-
-
... More
S&F for built in steel cup board with pressed steel frame of size 75 mmx 45 mmx 1.25 mm thick with pressed steel shutter 1 mm thick Godraj pattern fixed to masonary wall by hold fast out of 25x3mm flat iron including MS hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of MS peg set of 3 pegs, locking arrangement including spray painting with two coats of synthetic enamel paint over a coat of red oxide primer to all around on steel surface of frame and shutter and making good distrubed portion in CM 1:3 or PCC 1:2:4, type B0 using 12.5 mm graded stone aggregate complete all as specfied and directed.
538.4
-
-
... More
M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,
Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
80
-
-
... More
Supply and fixing factory made three track three shutter sliding window with frame incl stainless steel fly proof wire mesh having 0.56mm nominal dia of wire and average width of aperture 1.18mm & 5.5 mm thick glass (As approved by GE) panes fixed (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 (+) (-) 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension uPVC white colour sliding glazed window comprising uPVC multi chambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 (+) (-) 0.2 mm thick alvanized mild steel section made from roll forming porcess of required length (shape & size according to uPVC profile) including appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing grame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
528
-
-
... More
Supply and fixing factory made three track three shutter sliding window with frame incl stainless steel fly proof wire mesh having 0.56 mm nominal dia of wire and average width of aperture 1.18 mm & 5.5 mm thick glass (As approved by GE) panes fixed (partially glazed & partially wire mesh) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 (+) (-) 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension uPVC white colour sliding glazed window comprising uPVC multi chambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 (+) (-) 0.2 mm thick alvanized mild steel section made from roll forming porcess of required length (shape & size according to uPVC profile) including appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing grame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
176
-
-
... More
M&L for stone slab (Color as approved by GE) 25-30mm thick stone dressed true and square, in one length not less than 60 cm and n. exc 120 cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and directed.
592
-
-
... More
Dismantling boarding, any description fixed in any position with screws complete all as specified and directed.
1120
-
-
... More
M&L, 18/19mm thick wpc board (including frame), prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with SS screws to WPC frame work in cup boards, and kitchen cabinet rebated or flat edged fancy handle , each leaf 02 Nos Magnet lock complete all as specified and directed.
1120
-
-
... More
M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified and directed.
8895
-
-
... More
M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel over one coat of primer all as specified & directed
1092
-
-
... More
M&L Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
12
-
-
... More
S & F 30 mm flaps Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.
191.2
-
-
... More
Supply & fix 125mm size stainless steel handles cast type anodized complete all as specified & directed.
480
-
-
... More
Supply & fix 150mm size stainless steel handles cast type anodized complete all as specified & directed.
640
-
-
... More
M&L for 125mm long brass handles cast type, polished bright fixed with stainless steel screw complete all as specified & directed.
1200
-
-
... More
S&F for stainless steel wide 110 degree Hydraulic hing fixed with stainless steel screw complete all as specified and directed.
1760
-
-
... More
S&F stainless steel sliding bolt 300mm long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed
400
-
-
... More
S&F stainless steel heavy weight butt hinges 100mm in size complete all as specified and directed.
1920
-
-
... More
S&F stainless steel barrel tower bolt with bright bolt 200 mm long complete all as specified & directed
720
-
-
... More
S&F 1.00 mm th.mild steel, plain, black sheet in hearths; covering to Manhole cover covering to door chowkats (frames); chullah hoods; water tanks; water troughs: ducts; urinal trought and funnels etc cut to size edges beads, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/ riveted seanes including bending turning up mitred engles, stopped ends, outlets, etc. as required complete all as specified and directed.
136.8
-
-
... More
S&F mild steel 300mm size helical door spring including roller and roller plate fixed with screws to wooden chowkat or welded to steel frame, complete all specified and as directed.
160
-
-
... More
Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
9505
-
-
... More
M & L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.
5275
-
-
... More
M&L Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified and directed.
1200
-
-
... More
M&L for 15 mm thick rendering in two layers on fair faces of brick work or concrete surfaces first layers 10 mm thick with cement mortar 1:6 on fair faces of brick work or concrete surfaces and second layers 5 mm thick with cement mortar 1:4 with mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed.
(Note:- Water Proofing compound shall be measured and paid separately under respective item)
3030
-
-
... More
M&L Preparation of old surface after complete removal of existing treatment by mechanical equipment complete all as specified and directed
6000
-
-
... More
M&L for one coat of primer using roller complete all as specified and directed.
14305
-
-
... More
M&L for Two coat of OBD using roller for painting complete all as specified and directed
8275
-
-
... More
M& L preparing plastered new surfaces of ceiling and applying two coats of OBD over a coat of putty on ceiling surface complete all as specified and directed.
1000
-
-
... More
All as ser item No. 50 above but on old ceiling surface.
5300
-
-
... More
Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition)
22.07
-
-
... More
M&L Form work to sides and soffits of beams lintels etc finished rough surface complete all as specified and directed.
8.1
-
-
... More
M & L RCC M-25 design mix as in beams, lintels over 1.5 m span etc complete all as specified and directed.
0.4
-
-
... More
M & L RCC M-25 as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4.including all neccesary formwork & finishing exposed concrete surface complete all as specified and directed
17.78
-
-
... More
Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poining ein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified & directed.
32
-
-
... More
S&F mild steel TMT bars No 500D 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.
1870
-
-
... More
ditto as per item no 57 but 6 to 8 mm dia complete all as specified and directed.
25
-
-
... More
Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed.
2560
-
-
... More
All as per Sl Item No.59 here-in-before but 20 mm bore pipe.
336
-
-
... More
Supplying and laying of CPVC 20mm outer dia pipes (concealed) SDR 11 & Plain CPVC SDR 11, with all fittings (including brass fittings/fixtures) and fixed on walls/ceiling (concealed) or laying in floors complete all as specified and directed.
2560
-
-
... More
Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified
336
-
-
... More
Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete.
80
-
-
... More
S&F Five layer white color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes complete all as specified.
80
-
-
... More
S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete.
80
-
-
... More
S&F in repair bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule
80
-
-
... More
S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union complete all as specified and directed.
320
-
-
... More
S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.
80
-
-
... More
S&F in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified.
80
-
-
... More
S&F in repair 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed.
80
-
-
... More
S&F in repair ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.
160
-
-
... More
S&F in repair ,PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.
80
-
-
... More
Supply & fix PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.
320
-
-
... More
S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
80
-
-
... More
S&F in repair Brass chromium plated shower rose 125mm size all as specified and directed
80
-
-
... More
S&F in repair CP brass soap dish complete all as specified
80
-
-
... More
S &F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.
400
-
-
... More
Supply and fix for 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste complete all as specified & directed.
720
-
-
... More
Supply and fix for110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes complete all as specified & directed.
960
-
-
... More
Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed.
160
-
-
... More
Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed.
160
-
-
... More
S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.
160
-
-
... More
S&F 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
40
-
-
... More
S^F 110mm PVC (SWR) 'S' trap complete all as specified and directed.
28
-
-
... More
S & F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
80
-
-
... More
S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia. complete all as specified and directed.
80
-
-
... More
S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 25 mm dia. complete all as specified and directed.
80
-
-
... More
S&F factory made 600 x 450 mm beveled edge mirror 5.5mm thick of selected quality glass and fixed to wooden plugs with chromium plated brass screws and cup washers (In repairs) complete all as specified and directed.
80
-
-
... More
S&F 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 20mm dia pipe fixed in repair complete all as specified and directed.
80
-
-
... More
S&F 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F-1017401, Pearl Cat Part No ARI-015, Hindware Cat Part No- F-74 0022
80
-
-
... More
S&F 15mm dia chromium plated fancy type sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F 2004501, Pearl Cat Part No ARI-011, Hindware Cat Part No- F 330023
80
-
-
... More
S&f in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
80
-
-
... More
S&F in repair fancy type glass corner of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.
80
-
-
... More
S&F (in repair)chromium plated towel rail 20mm dia D type 600 mm long as a approved quality.complete all as specified and directed.
80
-
-
... More
Supply and fixing PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.
80
-
-
... More
Supply & fix in repair 50 mm wide rubber beading for doors of required size complete all as specified & directed.
144
-
-
... More
S&F stainless steel plate rack of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one all as specified and directed
80
-
-
... More
S & F in repair 25mm dia Stainless steel decorated curtain rod with bracket and ring complete all as specified and directed.
960
-
-
... More
M&L injecting chemical emulsion for Post Constructional Anti-termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.
490
-
-
... More
M&L Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors soil complete all as specified.
990
-
-
... More
M&L Treatment the soil under plinth protection at the rate of 5 litres of emultion per square meter of surfaces area complete all as specified and directed.
592
-
-
... More
S&F Hand rails MS , half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 GDE Fe 410-W(Gde-E-250)quality B complete all as specified and directed.
2244
-
-
... More
M&L for dubbing out average 20mm thick cement plaster on irregular faces of walls and ceilings CM 1:4 complete all as specified and directed.
150
-
-
... More
Material & labour for sunken slab treatment comprising of the following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance n.exc. 250mm compete all as specified and directed.(b) Material & labour for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Material & labour for applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Material & labour for applying bitumin grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) Material & labour for 25mm thick plastering in CM 1:4 using water proofing compound (WPC) @ 3% by weight of cement. on wall of sunken floor (f) Material & labour for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g) Supply & fix of 32mm dia GI pipe medium grade, 450m long 9(for draining out the water) all as directed by engineer-in-Charge
80
-
-
... More
M & L for cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finihes with and incl material and labore in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 /Bk work in CM 1:4 as required at site and as directed by Engr-in-Charge
200
-
-
... More
Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.
2400
-
-
... More
Material & Labour for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement all as specified and directed.
120
-
-
... More
Material and Labour for 10mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finished even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate).
2400
-
-
... More
Supply only liquid water proofing compound (ISI Marked)
97.22
-
-
... More
Material & labour for cleaning of concrete or plastered surface of roof and applying priming coat using with bituminous primer @ 0.30Kg per Sqm followed evenly by a tack coat @ 1.20 Kg per Sqm using 85/25 grade industrial hot blown bitumen, over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3.6 kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160gm per sqm) unrolled & bonded to substrate with side and end laps 75mm and 100mm as per manufactures instructions and applying over it of tack coat using 85/25 grade industrial hot blown bitumen @ 1.20Kg per Sqm and finally finish the top by providing 40mm thick brick tiles kiln burnt, laid over & including 15mm thick screed bed in cement mortar 1:6, joints of the tiles grouted and flush pointed with cement sand mortar 1:3 mixed with 5% crude oil by weight of cement, complete all as specified and directed. (Note:- Dismantling of existing water tank on roof disconnected and after cleaning same position re-connecting shall be deemed included in quoted rate of item).
2500
-
-
... More
M & L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account)
45
-
-
... More
M&L for PCC1:3:6 type C1 using 20mm graded stone aggragate as in bed blocks, coping plinth protection etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete all as specified and directed.
44.4
-
-
... More
M & L for repairing existing RCC structure work by guniting to damaged edge bottom of beam , chajja, slab 40 to 60mm thick and part of RCC member in CM 1:3 & depositing material/ mortar with spray gun under a pressure of 20 to 30 N/CM2 including skefolding and welding wire mess 2 mm dia and size of wiremesh 50mm X 50 mm including cutting welding and placeing position as directed by Engr in-charge.
22
-
-
... More
Demolition and breaking up drain pipes dia 100mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
1680
-
-
... More
S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete GDE Fe 410-S complete all as specified and directed.
7904.9
-
-
... More
Excavation in trenches not exc 1.5m wide & not exc. 1.5 in depth in soft/loose soil for foundation laying cable etc exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft loose soil complete all as specified and directed
60.5
-
-
... More
Removal of excavated material (soil) to a distance n.exc 50mtr and depositing where directed at a level n.exc 1.5m above or below the starting point.
60.5
-
-
... More
M & L PCC ( 1 : 4 : 8 ) Type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
197.18
-
-
... More
S&F rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, reveting and / or welding or connecting with bolts and nuts (including revets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc, also for wedging, plumbing, truing up and fixing conf to Fe-410-W (Gde-E-250) quality A complete all as specified and directed
7580
-
-
... More
S & F rolled mild steel plates ( plain on chequered) channels, square cut or notched (ordinary and counter sunk) forming holes without any attachment conforming to Fe 410 W (Gde E. 250) quality ‘A’ complete all as specified & directed
1090.6
-
-
... More
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated or semi corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws in ridges as specified
905
-
-
... More
M&L Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa fixed with coach screw and washers, in ridges, walls etc with grade of zinc coating 275 bent to a curve complete all as specified and directed.
88
-
-
... More
S&F Mild steel flat iron as in wind ties including cutting drilling holes and securing bolts confirming to FE 410-0 of 310-0 complete all as specified and directed.
793
-
-
... More
Dismantling asbestos cement (corrugated, semi corrugated sheet etc) sheet in roof coverings complete all as specified and directed.
180
-
-
... More
Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft /loose soil complete all as specified and directed.
1600
-
-
... More
M&L for machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed.
1600
-
-
... More
M&L Sand for cushioning, including spreading and levelling in layers n exc 25 mm thick complete all as specified and directed.
40
-
-
... More
M&L for 15mm thick rendering on Brick masonary wall surfaces in CM 1:4 mixed with water proofing compound finised even and smooth with using extra cement all as directed by Engr-in-charge
180.35
-
-
... More
M&L 200mm dia Salt - glazed stoneware drain pipes laid in trenches and jointed as specified internal diiameter of pipe 200mm including demolition, removal from site upto 3.0 Km as directed by engg in charge and breaking up drain pipe ( salt glazed stone ware) complete all as specified and directed.
15
-
-
... More
M&L 150mm dia Salt - glazed stoneware drain pipes laid in trenches and jointed as specified internal diiameter of pipe 150mm including demolition, removal from site upto 3.0 Km as directed by engg in charge and breaking up drain pipe ( salt glazed stone ware) complete all as specified and directed.
180
-
-
... More
M & L concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 150 mm dia pipe work in foul position complete all as specified and directed.
165
-
-
... More
M & L concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 200 mm dia pipe work in foul position complete all as specified and directed.
13
-
-
... More
M & L for precast RCC 1:2:4 type B-1(using 20mm graded stone aggregate)for manhole cover including placing and set in CM 1:4 complete all as specified and directed.
3.88
-
-
... More
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including finishing the top of benching even and smooth using extra cement (forming channel shall be measured and paid for separately).
45
-
-
... More
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm pipe
58
-
-
... More
Returning filling in including spreading levelling, watering and well ramming in layers n. exc 25cm complete all as specified and directed.
13.95
-
-
... More
M&L for applying 2mm thick wall care putty making smooth surface complete all as specified and directed.
15680
-
-
... More
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting complete all as specified and directed..
6030
-
-
... More
Dismantling chain link fencing wire mess of any type complete all as specified and directed.
800
-
-
... More
Dismantling posts and struts (wood, steel or RCC) any section, including taking out embeded portion and making good disturb ground complete all as specified and directed.
6030
-
-
... More
Excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.
320
-
-
... More
S&F MS work as in angle iron fencing posts & struts thick for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to IS-15911-2010 complete all as specified and directed.
3712
-
-
... More
S&F MS round bars, Mild steel in flat, round or square bars, in available lenghts as per IS-15911-2010 complete all as specified and directed.
2351.04
-
-
... More
M&LMild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n exc 15cm long complete all as specified and directed.
26.64
-
-
... More
Supply only chain link Galvanized MS Fencing complete all as specified and directed.
2851.2
-
-
... More
Fixing only chain link fencing including line wires any mesh size and type of standards, rails, straining bolts etc including provn of binding wire complete all as specified and directed..
1200
-
-
... More
Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.
3800
-
-
... More
Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed by Engineer - in - Charge.
1200
-
-
... More
Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of not less than 20mm dia complete with all accessories/fittings, brass screws, washer etc, including modular metal flush boxes, modular plates inner and outer suitable for fixing modular switches/sockets/regulator and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, sheathed and connected to common earth and earth duly complete all as specified and directed for the followings :-
-
-
-
... More
One tube light/Bulb/ Bldg security light point controlled by one, one way switch 05 / 06 Amps.
1780
-
-
... More
One fan point / Exhaust fan point controlled by one, one way switch 05 / 06 Amps.
480
-
-
... More
One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.
640
-
-
... More
One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.
320
-
-
... More
One two way point controlled by two, two way switches 05 / 06 Amps.
20
-
-
... More
One Bell point controlled by one, one way switch 05 / 06 Amps.
80
-
-
... More
All as per Srl item No 149 above here-in-before but using 2.5 sqmm copper conductor and with 2.5 sqmm earth wire for one 15 amps socket outlet on independent board all as directed.
320
-
-
... More
-ditto- but with 4 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet/AC point on independent board.
160
-
-
... More
S&F Modular Switch, 1 module, 6A, AC, 240V, one way ISI Marked complete all as specified and directed.
3220
-
-
... More
S&F Modular Socket, 2 module, 6A, 2/3 pin combined, AC, 240V, ISI Marked and complete all as specified and directed..
960
-
-
... More
S&F Modular Socket, 2 module, 6A / 16A, 2/3 pin combined, AC, 240V, ISI Marked and as specified.
320
-
-
... More
S&F Modular Switch, 1 module, 16A, AC, 240V, one way ISI Marked complete all as specified and directed.
320
-
-
... More
S&F modular 06 amps two way 240V, ISI Marked complete all as specified and directed.
40
-
-
... More
S&F Modular Bell Push , 1 module, 6A, AC, 240V, ISI Marked complete all as specified and directed.
80
-
-
... More
S&F Modular 4 step fan regulator 1/2 module, 100w, AC, 240V, ISI Marked complete all as specified and directed.
240
-
-
... More
Supply and fixing Bell,AC , 230 volts ,Single pole complete all as specified and directed.
80
-
-
... More
Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate complete all as specified and directed..
480
-
-
... More
Supply and fixing LED lamp 9/10 watt complete all as specified and directed.
480
-
-
... More
S & F 20 W surface / wall mounted,single rod 4 feet LED T-8 batten having luminous efficacy of ≥100 lumen/W, CRI 80, PF 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD 20%, surge voltage protection polycarbonate diffuser and housing with end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineer-in-charge.
640
-
-
... More
Supply and fix wall light fixture made up of polycarbonate including 8 to 10 watt LED lamp complete all as specified and directed.
320
-
-
... More
Supply and fixing decorative LED tube light fitting 10 watt wall mounted with extruded polycarbonate ,integrated lamp & driver with opal diffuser and decorative end plates complete with all accessories and fixing material complete all as specified and directed.
240
-
-
... More
Supply and fixing 25W LED building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including all material required for fitting all as specified and directed by Engr-in-Charge.
100
-
-
... More
Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.
1300
-
-
... More
Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing incl taking down old u/s submain wiring complete all as specified & directed.
Note:
1200
-
-
... More
Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 12 way, with 32 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces incl taking down old u/s DB's complete all as directed by Engineer - in -charge.
80
-
-
... More
Supply and fixing MCB, SP, AC, 240 volts "C" series capacity of 06 to 32Amps, 10kA and making connections complete all as specified & directed.
992
-
-
... More
Supply & fixingIsolator, DP (Double Pole), AC, 240 volts, B series capacity 32 Amps and making connections complete all as specified & directed.
160
-
-
... More
Supply and fixing MCCB 4 pole 125 Amps 25 kA ,thermal magnetic based protection release,Adjustable thermal protection Ir (against overloads),Ics=100% Icu all as specified and as directed.
16
-
-
... More
Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 08 protection, with provision of 16 KA 125 Amp G frame MCCB. Make- Legrand/Schneider/ABB with the inbuilt provison for fixing of 1 No MCCB and 12 Nos MCB'S inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as directed by Engineer - in - Charge.
16
-
-
... More
Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.
32
-
-
... More
S/F Modular Power Switch and Socket Unit with factory made poly carbonate modular box, 20A, 3Pin, AC, 240V incl 20A MCB SP and Plug Top ISI Marked all as directed.
80
-
-
... More
supply and fixing Steel Exhaust fan with louver/bird guard and fixing accessories 230 Volt and 300mm sweep.
80
-
-
... More
supply and fixing Exhaust fan with louver PVC and fixing accessories 230 Volt and 250 mm sweep.
160
-
-
... More
M&L for making opening in the wall for fixing exhaust fan up to 250mm / 300mm,including plastering work & making good the surfaces all as directed.
240
-
-
... More
S&F BLDC ceiling fan 1200mm sweep 220CMM air delivery,BEE 5 star energy rated minimum service value≥6,copper winded motor ,anti rust powder coated aluminium blade,double ball bearing, dynamically balanced including canopy,down rod,shackel assembly,safety pin,nut bolt etc electrical connection with flexible Cu conductor cable of appropriate size from ceiling rose/junction box to the fixture complete incl writing MES No. all as specified and directed by the engineer-in-charge.
240
-
-
... More
Supply and fix electric water heater, storage type SS/glassline inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipes,hanging assembly etc connecting with 3 core flexible Cu conductor cable of appropriate size from power point to the geyser including plug top,writing MES No. ,complete all as specified and directed by the engineer-in-charge.
80
-
-
... More
Taking down existing Exhaust fan 250 / 300 mm of any size any type, and keep them safe to deposited to E/M yard complete all as directed.
240
-
-
... More
Taking down existing ceiling fan of any size, CeiIing cable end,dismentalling blades ,make one set of three blades and keep them safe to deposited to E/M yard complete all as directed.
240
-
-
... More
Taking down existing water heater of any size,capacity disconnecting connection and keep them safe to deposited to E/M yard complete all as directed.
80
-
-
... More
Supply and Laying XLPE UG cable PVC insulated,bedded armoured heavy duty electric cable 1100 volts grade with aluminium conductor of size 120 Sqmm 3.5 core in trenches or fixed on wall/floor/ pole complete all as specified and directed.
190
-
-
... More
Supply and Laying XLPE UG cable PVC insulated,bedded armoured heavy duty electric cable 1100 volts grade with aluminium conductor of size 95 Sqmm 3.5 core in trenches or fixed on wall/floor/ pole complete all as specified and directed.
280
-
-
... More
Supply and Laying XLPE UG cable PVC insulated,bedded armoured heavy duty electric cable 1100 volts grade with aluminium conductor of size 50 Sqmm 3.5 core in trenches or fixed on wall/floor/ pole complete all as specified and directed.
140
-
-
... More
Supply and Laying XLPE LT UG cable PVC insulated,bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 25 Sqmm 4 core in trenches or fixed on wall/floor/poles complete all as specified and directed.
740
-
-
... More
Supply and Laying XLPE LT UG cable PVC insulated,bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 16 Sqmm 4 core in trenches or fixed on wall/floor/poles complete all as specified and directed.
360
-
-
... More
Supply, installing, errecting, testing and commissioning, factory made and tested LT Panel board with all accessories. LT Panel board size 1100x1025x500 MM,IP 65( OUT DOOR type) platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated Aluminum busbars 2 installed on porcelain / SMC insulators and all interconnection between main busbars as well as outgoing feeders shall be carried out with TPN Aluminum busbar of rating not less then 1.5 times rated capacity of individual out going feeders. The panel shall be dust and vermin proof, IP 56 class protection and made of 3.15 mm CRCA MS sheet and 50x50x6mm thick angle iron frame work, bottom channel of size: 70x40x5 mm powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front / back opening type, and fixing 2 Nos.danger notice plate with letter, figures and conventional skull bones in signal red colour and fixed front & back door to LT panel etc with voltage and danger indiated in Hindi and English, with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) stranded lock with 2 keys, internal wiring with PVC insulated, stranded copper conductor, FRLSH cables, IS-694 marked of adequate size but not less than 1.5 Sqmm. The platform shall be such that it is of a height 30 cm above the nearest ground level. complete all as specified and directed including connections of all out going/in coming existing cables of size 25 to 400 sqmm by drawing /digging out cable from loops in trenches/ ducts out side the Bldg inclusive of necessary excavation and earth work as required and relaying the cables with retrieved bricks and providing new sand cushioning and crimping suitable size Alluminium lugs for terminal connections of cables, necessary PCC foundation with plastering to the Panel board, All out going feeders shall be connected by cable through suitable size gland plate / glands.& The various feeders shall be indicated by 50 mm size letters in synthetic enamel white paint. complete all as specified and as directed by Engr-in-Charge.
1
-
-
... More
(I) Incoming :- (i) Aluminum busbar, 4 Pole, 600 Amps (ii) MCCB 4P, 400A, 36 KA, with thermal magnetic: O/L & S/C protection , ICS= 100% ICU = 01 Nos.(iii) Ammeter Digital type, CT operated 0-630A range, MAKE: SECURE / L&T (with selector switch and CT) - 01 Set (iv) Volt Meter Digital type 0-500 V range, Make:SECURE / L&T (With selector switch) - 01 No. (v ) Indicating Lamp LED type 240 V 50 HZ AC supply (Make BCH/SIEMENS/L&T) set of three colour (RYB)-01 set. (II) Outgoing :- (i) MCCB 4P, 200A, 36 KA, with thermal magnetic: O/L & S/C protection , ICS= 100% ICU = 02 Nos. (ii) MCCB 4P, 125A, 25 KA, with thermal magnetic: O/L & S/C protection , ICS= 100% ICU = 01 Nos.(iii) MCCB 4P, 63A, 16 KA, with thermal magnetic: O/L & S/C protection , ICS= 100% ICU = 02 Nos.
-
-
-
... More
M&Lfly ash old size bricks , laid flat with width equal to length of brick , laid dry over electric cable for protection complete all as specified and directed.
10.75
-
-
... More
M & L for local sand coushioning with dry and clean over and under the cable for protection of cable , 80 mm sand laid before laying the cable 150 mm sand after laying the cable and filling the sand in cable duct of inside the sub station building complete all as specified and directed.
108.86
-
-
... More
Dismantling the existing LT over head line (ACSR conductor) carefully any size from LT pole including disconnecting electric connection) complete all as specified and directed.
1.68
-
-
... More
Dismantling/taking down carefully insulator any size and any type from existing LT lines complete all as specified and directed.
55
-
-
... More
Dismantling of cross arms of MS channel or angle iron section with clamps etc. complete all as specified and directed.
0.8
-
-
... More
Dismantling the existing stay assembly complete all as directed.
3
-
-
... More
Supplying, installing, commissioing and testing of LT switchgear panel board ( Kiosk) of size not less than 600mmx600mmx500mm, IP-65 (outdoor type) , 415 Volts, 50 Hz, AC supply, three phase and neutral ( 4 wire) , 400 Amps coloured horizontal tinned Aluminium bus bars , factory made out of 3.15mm thick MS sheet structure mounted on rigid mild steel angle iron frame of 50mmx50mmx6mm with 400mm long extended legs grouting in PCC 1:2:4 type B1 of size 150mmx150mmx250mm , duly epoxy powder coated internally and externally with approved shade, rubber gasketted, hinged front double door and back openable doors with proper locking arrangements for dust and vermin proof ,complete including adjustable thermal and fixed magnetic release MCCB 4 pole, 200 Amps, 415V,36 KA,50 hz -01 No (incoming),suitable size cable allay, lugs , glands and making connections/ wiring with suitable size SC PVC insulated copper conductor cable all as specified.
3
-
-
... More
Supplying, installing, commissioing and testing of LT switchgear panel board ( Kiosk) of size not less than 600mmx600mmx500mm, IP-65 (outdoor type) , 415 Volts, 50 Hz, AC supply, three phase and neutral ( 4 wire) , 200 Amps coloured horizontal tinned Aluminium bus bars , factory made out of 3.15mm thick MS sheet structure mounted on rigid mild steel angle iron frame of 50mmx50mmx6mm with 400mm long extended legs grouting in PCC 1:2:4 type B1 of size 150mmx150mmx250mm , duly epoxy powder coated internally and externally with approved shade, rubber gasketted, hinged front double door and back openable doors with proper locking arrangements for dust and vermin proof ,complete including adjustable thermal and fixed magnetic release MCCB 4 pole, 100 Amps, 415V,36 KA,50 hz -01 No (incoming),suitable size cable allay, lugs , glands and making connections/ wiring with suitable size SC PVC insulated copper conductor cable all as specified.
2
-
-
... More
M&L earthing complete with galvanised steel earth plate electrode, 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 3.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvanised strip 25x4 mm size as earthing lead by means of bolts, nuts, check nuts and washers of GI up to test point, GI tubing 15 mm bore medium grade protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal, salt complete all as per SSR with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted).
12
-
-
... More
Material and labour for GI tubing light grade 100 mm bore for passing through cables, laid in treanches, under the floor, along the wall or along the pole with necessary clamps, nuts, bolts and washers etc. and making good disturbed surface of wall, floor etc complete all as specified and directed .
18
-
-
... More
Material and labour for GI tubing light grade 50 mm bore for passing through cables, laid in treanches, under the floor, along the wall or along the pole with necessary clamps, nuts, bolts and washers etc. and making good disturbed surface of wall, floor etc complete all as specified and directed .
12
-
-
... More
Material and labour for GI tubing light grade 40 mm bore for passing through cables, laid in treanches, under the floor, along the wall or along the pole with necessary clamps, nuts, bolts and washers etc. and making good disturbed surface of wall, floor etc complete all as specified and directed .
35
-
-
... More
M & L for drilling suitable dia horizontal bore holes for insertion / laying of 50/100 mm bore GI tubing of any description below/under road surface/floors etc with using mechanical or manual devices as required at site including making good disturbed surface to match with the existing streta after laying pipes complete all as specified and directed
65
-
-
... More
Supply and fixing thermoplastic polystyrene /polycarbonate enclosure bus bar chamber , shock proof , vermin proof and dust proof complete with 04 Nos aluminium strip of capacity 100 amps including non metalic clapms and GI nut bolts and washers of suitable size and fixed on pole / wall complete all as specified and directed.
12
-
-
... More
S&F 3 core , stranded copper conductor cable 1.5 sqmm, PVC insulated and PVC sheathed , 1100 Volts grade for making connections from junction box to street light fittings including PVC conduit of size 20mm dia including necessary clamps complete all as specified and directed.
140
-
-
... More
Disconnecting and Taking out old existing GI pipe and connecting of any description / grade and any position of trenches / under floors/ on walls etc including connecting fitting / accessoriese and fixtures such as bend, union, elbow socket etc. all as directed and specified for the following size of pipe :-
-
-
-
... More
a) 40/ 50mm dia bore
750
-
-
... More
b) 25mm dia bore
960
-
-
... More
c ) CI pipe 100 mm dia
250
-
-
... More
S & F GI tubing, medium grade, 50 mm bore ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc complete all as specified & directed,.
750
-
-
... More
S & F GI tubing, medium grade, 25 mm bore ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc complete all as specified & directed,.
960
-
-
... More
S&F DI pipe with spigot and socketed class K-9 size 100mm bore suitable for tyton joints in S-5.5 mtr length
250
-
-
... More
S & F GI elbow reducer 50/ 25 mm bore both side threaded ISI marked complete all as specified & directed,
60
-
-
... More
S & F GI nipple 50 mm bore both 6" long both side threaded ISI marked complete all as specified & directed,
120
-
-
... More
S & F GI 'T' 50 mm bore with threaded ISI marked complete all as specified & directed,
150
-
-
... More
S & F GI Union 50 mm bore with threaded ISI marked complete all as specified & directed,
30
-
-
... More
S & F cast iron fitting for pressure water pipe line like bend, tapers, reducer , tail piece, 'T' socket of up to 150mm pipe ISI marked .
150
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%