Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date18 Nov 2024
Closing Date9 Dec 2024
Tender Amount₹ 48,98,000
Costs
EMD
₹ 97,960Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_684356_1Tender No
GE/EM/LKO/HOSP/T-78 OF 2024-2025Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Taking down shutters of any description area exc 1 Sqm and n exc 2 Sqm each complete all as specified and directed.
40
-
-
S&F Mild steel work Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 as in small articles like angle iron framing work for manhole, rungs/steps in man hole, complete all as specified and directed.
50
-
-
M&L for preparing new steel surfaces of small articles like MS rungs etc and treating with coal tar black paint, area tarred not exc 0.1 sqm, each complete all as specified and directed.
0.1
-
-
S&F PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening complete all as specified and directed.
90
-
-
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed by Engineer-in-Charge.
40
-
-
S&F plain solid, straight chowkhat & frames of 2nd class HW (Hollock) wrought, framed rebated on the solid, rounded or chamfered, put together with glue & pinned at joints including preparation of back of chowkats & treated with coal tar complete all as specified and directed.
0.4
-
-
S&F 25 mm thick flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed.
10
-
-
S&F 30 mm thick flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed.
30
-
-
S&F 35 mm thick flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed.
10
-
-
M&L for 0.9 mm thick decorative texture finish laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed.
20
-
-
S&F 30 mm thick 2nd class hard wood Glazed and Skelton shutter, open rebated and prepared to receive glass, gauge etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(b) complete all as specified and directed.
20
-
-
S&F 25 mm thick 2nd class hard wood Glazed and Skelton shutter, open rebated and prepared to receive glass, gauge etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(b) complete all as specified and directed.
10
-
-
S&F steel windows with side hung shutters including hinges with steel handle, and steel peg stay, complete with and including both glazing and gauge shutters to receive glass and wire mesh, dovetailed or welded complete all as specified and directed.
10
-
-
S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.
5
-
-
S&F 250 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified and directed.
20
-
-
S&F 300 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified and directed.
20
-
-
S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt complete all as specified and directed.
20
-
-
S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified and directed.
20
-
-
S&F 75 mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed.
60
-
-
S&F 100 mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed.
60
-
-
S&F 125 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
45
-
-
S&F 150 mm floor door stopper of aluminium alloy body and tonged, anodised with hard drawn steel spring, complete all as specified and directed.
40
-
-
S&F in repair 250 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified and directed.
50
-
-
S&F in repair 300 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified and directed.
60
-
-
S&F in repair Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt complete all as specified and directed.
90
-
-
S&F in repair Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified and directed.
120
-
-
S&F in repair 75mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed.
50
-
-
S&F in repair 100mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed.
100
-
-
S&F in repair 125mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
40
-
-
S&F in repair for 150 mm floor door stopper of aluminium alloy body and tonged, anodised with hard drawn steel spring, complete all as specified and directed.
120
-
-
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed.
10
-
-
S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed.
25
-
-
Hacking out old broken glass, any thickness, size, quality, or description, from frame n.exc 1.5 Sqm each pane, complete all as specified and directed.
20
-
-
S&F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beading / aluminium beading n.exc 0.5 Sqm each pane, complete all as specified and directed.
15
-
-
S&F 3.0 mm thick figured glass ordinary quality and glazing with oil putty / wooden beading / aluminium beading n.exc 0.5 Sqm each pane, complete all as specified and directed.
5
-
-
S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beading / aluminium beading exc 0.5 Sqm each pane, complete all as specified and directed.
8
-
-
S&F 12 mm thick toughened glass door with or without frosted and decorative as directed of selected quality in single / double leaf door with and including all necessary fixing arrangement like SS clamp / clips, arrangements for fixing of floor spring, SS handle (2 Nos in each leaf), SS lock with locking arrangements etc, including taking down old shutters and making good the wall surfaces as per existing conditions complete all as specified and directed. Note:- floor spring measured and paid separately.
10
-
-
S&F 12 mm thick toughened glass ordinary quality and fixed to aluminium joinery with and including neoprene beading, SS clip or cleats of any size any position including taking down of existing unserviceable glass
5
-
-
M&L for Repairing of existing aluminium door single / double leaf (area of each leaf exc 1 Sqm but n.exc 2.0 Sqm) by taking down tightening of joint, tightening of top & bottom patch, replacement of cleat, screw, oiling and greasing of floor springs, & refixing in same opening for smooth functioning complete all as specified. Note:- Floor door springs where renewed shall be measured and paid separately under appropriate item of BOQ.
150
-
-
M&L for Repairing of existing toughened glass door single leaf (area of each leaf exc 1 Sqm but n.exc 2.0 Sqm) by taking down old door, tightening of top & bottom patch, oiling and greasing of floor springs, & refixing in same opening for smooth functioning complete all as specified. Note:- Floor door springs where renewed shall be measured and paid separately under appropriate item of BOQ.
5
-
-
M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. (Note:- floor spring will be suitable for up to 1.25 m wide shuters)
10
-
-
S&F in repairs Aluminium body (extruded section ) body Door closer hydraulically regulated, designation No. 2 , universal type, suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed, complete all as specified and directed.
40
-
-
S&F in repair for 100 mm mild steel mortice lock vertical type with 4 brass lever and duplicate key complete all as specified and directed.
10
-
-
S&F aluminium anodised sections ( conforming to IS) door with frame of size 100 mm x 44.45 mm wide fabricated with 2 mm thick section, double / single leaf shutter with 44.45 mm wide fabricated with 2 mm thick section having vertical and top rail 83.50 mm, bottom rail and middle rail 115 mm and including necessary jointing cleats, screws, neosprene rubber beading, PVC packing, partially glazed with 4.8 mm thick tinted glass panes and panelled with 3 mm thick Aluminium composite panel, 100 mm butt hinges (3 Nos in each shutters), 150 mm tower bolt (1 in each panel), locking arrangements with 100 mortice lock complete all as specified and directed.
15
-
-
S&F powder coated aluminium sections ( conforming to IS) door with frame of size 100mmx 44.45mm wide fabricated with 2mm thick section , double/single leaf shutter with 44.45mm wide fabricated with 2mm thick section having vertical and top rail 83.50mm, bottom rail and middle rail 115mm and including necessary jointing cleats, screws, neoprene rubber beading, PVC packing, partially glazed with 4.8 mm thick tinted glass panes and panelled with 3 mm thick Aluminium composite panel, 100 mm butt hinges (3 Nos in each shutters), 150mm tower bolt (1 in each panel), locking arrangements with 100 mortice lock complete all as specified and directed.
10
-
-
S&F aluminium anodised sections sliding windows shutters with frames comprising Series -C (20mm), 2 track sliding shutters duly fitted with neoprene beading, glazing clips, locking device, 4.8mm thick heat absorbing glass panes complete all as specified and directed. (Note :- Thickness of aluminium section minimum 2mm)
10
-
-
S&F aluminium anodised sections sliding windows shutters with frames comprising Series -C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips, locking device, 4.8mm thick heat absorbing glass panes in 2 shutters and 0.46mm dia SS wire mesh in one shutter complete all as specified and directed. (Note :- Thickness of aluminium section minimum 2mm)
15
-
-
S&F aluminium anodised sections fixed and openable windows shutters with frames duly fitted with neoprene beading, glazing clips, locking device, 4mm thick glass panes complete all as specified and directed. (Note :- Thickness of aluminium section minimum 2 mm)
10
-
-
S&F aluminium sections powder coated sliding windows shutters with frames comprising Series -C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips, locking device, 4.8mm thick heat absorbing glass panes in 2 shutters and 0.46mm dia SS wire mesh in one shutter complete all as specified and directed. (Note :- Thickness of aluminium section minimum 2mm)
30
-
-
S&F in repairs aluminium anodized grill weight of 3.13 Kg per Sqm (min) with suitable aluminium anodized frame of F/H section of 0.297 Kg per Meter (min) with suitable fixing screws / attachment etc complete all as specified and directed.
20
-
-
S&F in repairs aluminium powder coated grill weight of 3.13 Kg per Sqm (min) with suitable aluminium anodized frame of F/H section of 0.297 Kg per Meter (min) with suitable fixing screws / attachment etc complete all as specified and directed.
15
-
-
S&F aluminium anodised partition fabricated with aluminium powder coated (minimum thickness of powder coating 50 micron) section for side & top rail of size 101 mm x 44 mm x 2.5 mm for middle rail (horizontal / vertical) of size 101 mm x 44 mm x 2.5 mm, partly glazed with 5 mm thick frosted glass and partly panelled with 3 mm thick aluminium composite panel including glazing clip, rubber bead, fixed in position as per stander practice complete all as directed by the Engineer-in-Charge.
20
-
-
S&F aluminium powder coated partition fabricated with aluminium powder coated (minimum thickness of powder coating 50 micron) section for side & top rail of size 101 mm x 44 mm x 2.5 mm for middle rail (horizontal / vertical) of size 101 mm x 44 mm x 2.5 mm, partly glazed with 5 mm thick frosted glass and partly panelled with 3 mm thick aluminium composite panel including glazing clip, rubber bead, fixed in position as per stander practice complete all as directed by the Engineer-in-Charge.
20
-
-
S&F door comprising frame fabricated with aluminium tube with wall thickness 2 mm, shutter frame with C type aluminium section 25 mm size of 2 mm wall thickness, door panel of 3 mm thick aluminium composite panel and neoprene rubber beading as specified and directed by EIC
10
-
-
S&F in repair curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed.
50
-
-
S&F false ceiling of E-board of size 600 x 600 x 4 mm thick, white prelaminated seif embossed reinforced designer ceiling board tiles of approved texture at all height including snap grid for false ceiling of size 600 mm x 600 mm grid EXPOSED GRID SYSTEM fabricated with galvanised iron powder coated section all as shown on serial page No 185 of SSR part II (2020 print) including dismantling of existing ceiling, complete all as specified directed by the Engineer-in-Charge
200
-
-
M&L for seamless ceiling comprising of Gypsum Board 12 mm thick in ceiling fixed with screw or as per manufacturers instructions, with necessary jointing and taping, fixed over and including Gl frame work comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre, intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including applying 2 coat distemper oil emulsion over 2 mm thick cement base putty including dismantling of existing ceiling, complete all as specified and directed.
200
-
-
S&F in repair Non asbestos fibre cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto cleaving process confirming to IS-14862, of size 600 mm x 600 mm x 6 mm thick fixed or laid / inserted to timber / GI / Aluminium framework with screws complete all as specified and directed by Engineer-in-Charge.
10
-
-
M&L for repairing of false ceiling by taking down old ceiling tiles / board, making the grid in true alignments and true level by adjustment hanging wires, Re-fixing of existing ceilings board & tiles including replacement of hanging wires wherever required at all height complete all as specified and directed. Note:- Ceiling tiles / board wherever found damaged shall be replace and will measured & paid separately.
100
-
-
M&L of false ceiling at any height with 600 mm x 600 mm x 15 mm thick micro looks mineral fibre ceiling tiles, fixed on and including exposed grid systems with 15 mm wide T-section flanges. The frame work comprises of main runner of size 15 x 32 x 3000 mm spaced at 1200 mm centre securing fixed to the structural soffits by approved hangers at 1200 mm maximum centre. Hangers (GI wire of 4.0mm dia) to be fixed by approved roof plug, level adjusters and screws etc. The last hanger at the end of each main runner should not be greater than 450 mm from the adjacent wall flush fitting 1200mm long cross tees of size 14 x 26 x 1200 mm to be interlocked between main runners at 600 mm centres to form a 1200 mm x 600 mm module, cut cross tees longer than that 600 mm to be supported independently 600mm x 600mm modules to be formed by fittings 600mm long flush fitting cross tees of size 15 x 26 x 600mm centrally between the 1200 mm cross tees perimeter wall angle of size 19 x 19x 3000mm secured to wall 450mm maximum centres, including dismantling of existing ceiling, complete all as specified and directed.. Make: Armstrong Type Dune Max RH-99, with Supper fine XL 15 mm grid system or equivalent of make mention under list of make.
10
-
-
M&L for Super heavy series PVC Wall panelling consisting of 5-8 mm thick Plain / wood colour PVC sheet of approved coloured & pattern, fixed on walls as per manufactures instruction including dismantling of existing panelling complete all as specified & directed.
200
-
-
S&F in repair stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.
60
-
-
Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified and directed.
8
-
-
M&L for Brick work with Fly ash brick designation 100 Kg / Sqcm, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, using bricks of size 230 mm x 110 mm x 70 mm confirming to IS 12894, complete all as specified and as directed by Engineer-in-Charge.
5
-
-
M&L for Brick work in half brick thick wall with Fly ash brick designation 100 Kg / Sqcm, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4, using bricks of size 230 mm x 110 mm x 70 mm confirming to IS 12894, complete all as specified and as directed by Engineer-in-Charge.
20
-
-
Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15 cm thickness (below or above ground level), complete all as specified and directed.
10
-
-
M&L for 40 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the top surface even and smooth, without using extra cement complete all as specified and as directed by Engineer-in-charge.
50
-
-
M&L for plain cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregate as in roof kerbs or mud stops or similar work rounded or chamfered on edges complete all as specified and as directed by Engineer-in-charge.
2
-
-
M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, bed block, wall through and the like including weathering slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.
1
-
-
M&L for 75 mm thick plain cement concrete 1:3:6, type C2, using 40 mm graded stone aggregate, as plinth protection / path and the like, finished even and smooth without using extra cement all as specified and as directed.
50
-
-
Taking down cement plaster of any description on brick or stone masonry wall , etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified.
800
-
-
M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete wall surfaces including mixing only water proofing compound as per manufacturers instruction and finishing the surface even and smooth without using extra cement complete all as specified. Note:- Waterproofing compound will be measured and paid separately.
400
-
-
M&L for rendering 15 mm thick on stone masonry wall surface in cement mortar 1:6, finished even and smooth without using extra cement all as specified and directed
200
-
-
M&L for rendering 10 mm thick on stone masonry wall surface in cement mortar (1:6), finished even and smooth without using extra cement all as specified and directed
400
-
-
M&L for 10 mm thick rendering in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement.
50
-
-
M&L for Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge
50
-
-
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper (first Quality) over one coat of primer over and including 2 mm to 3 mm thick cement base wall care putty complete all as specified and directed by Engineer-in-charge.
400
-
-
M&L for preparation of new plastered surface of walls and applying two coats 100% Premium acrylic emulsion exterior paint over one coat primer including 1 mm thick exterior grade wall care putty complete all as specified and directed. Make Apex (Asian Paint) / Weather coat (Berger) / Excel Top Guard (Nerolac)
400
-
-
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint of any tint/shade complete all as specified and directed.
200
-
-
Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debris to a distance exc 1.5 km but n.exc 5 Km
240
-
-
M&L for premium / 1st quality non skid ceramic coloured tiles of size 300 mm x 300 mm x 7-8 mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles laid over and including 15 mm thick screed in CM 1:6 complete all as specified and directed by Engineer-in-Charge. Note : Quoted rate shall be deemed to include cast of screed bed.
50
-
-
M&L premium / 1st quality coloured glazed ceramic tiles (digital printed) in vertical surfaces of size 300 mm x 450 mm x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, laid over and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed by Engineer-in-Charge. Note : Quoted rate shall be deemed to include cast of backing coat.
150
-
-
M&L for premium / 1st quality coloured vitrified ceramic tiles, 8-10 mm thick (square) polished, area of each tiles n.exc 0.36 sqm as in floors etc set and jointed in neat cement slurry and pointed in light white or coloured cement and pigment to match the tiles laid over and including 15 mm thick scree bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge. Note : Quoted rate shall be deemed to include cast of screed bed.
200
-
-
All as per item No 86 above but as in skirting but laid over and including 10 mm thick rendering in CM. 1:4 as backing coat etc
20
-
-
M&L for 18-20mm thick machine cut Kota stone slab flooring with marble stone strips / slab / tiles as per design approved, laid over and including cement screed bed 20 mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, & polishing complete all as specified and directed.
50
-
-
M&L for 18-20 mm thick machine cut Kota stone slab as in skirting /riser laid over and including backing coat 10 mm thick in CM 1:3, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.
5
-
-
Deployment of man power & floor grinding machine for grinding and polishing of existing Kota stone / terrazzo tiles flooring, polished up to mirror finish complete all as specified and directed
100
-
-
M&L for 18 to 20 mm thick granite (of any type) tiles machine cut & machine polished, set & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including screed bed 15 mm thick in cement mortar 1:4 complete all as specified and directed.
14
-
-
Demolition of existing roof treatment of any type, including screed bed etc complete all as specified and directed.
500
-
-
M&L for plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate, (Avg 50 mm thickness) in roof for padding to achieve the 1:40 slope complete all as specified and as directed.
5
-
-
M&L for 15 mm thick screed bed in cement mortar 1:4 over RCC roof slab including mixing only water proofing compound as per manufacturer instruction complete all as specified and directed by Engineer-in-Charge. (WPC will be measured and paid separately)
500
-
-
M&L for water proofing treatment on roof surfaces in the following manner:-
(a) The surfaces shall be painted with hot bitumen grade 30/40 confirming to IS-73 @ 1.20 kg / sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 ltr /sqm.
(b) Supply & lay 3 mm thick APP water proofing membrane reinforced with non woven polyester matt laid using bitumen torch by torch application with a side lap of 10 cm & 15 cm end lap weighing not less than 3.5 kg / sqm. Note: - (i) Work to be carried out through authorised applicators of the manufactures and work will be carried out in complete / in patches in roofs
(ii) Contractor shall submit written guarantee of 07 (seven) years from date of completion & submit security deposit @ 2.5% of executed amount or Rs 6250.00 which ever is more.
500
-
-
M&L for preparation of untreated surface of APP membrane of any description over 10 cm in width or girth, not otherwise described and applying two coat of aluminium paints over one coat primer complete all as specified and directed.
450
-
-
M&L for 230 x 115 x 40 mm thick machine pressed brick tiles laid over & including screed bed 20 mm thick in cement mortar in 1:3 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement.
50
-
-
Supply only Liquide water proofing chemical.
25
-
-
M&L for high performance hybrid polyurea slastomeric waterproofing coating cold applied of spray / brush applied, SmartCare ulton liquid membrane at 1.5 Kg/Sqm with an elongation of 600% and tensile strength of 12.6 N/Sqmm as per ASTM D2370, crack bridging ability of 3.5 mm as per ASTM C1305, shore a hardness of min 75 as per ASTM D2240. The system includes final base preparation as per site requirement, epoxy primer application and applying SmartCare Ultron or approved equivalent in two coats at a coverage of 1 Kg / Sqm etc complete as per manufacturer's specification including cleaning of the surface over and including 15 mm thick screed bed in cement mortar 1:4 with water proofing compound @ 3% of cement weight complete all as specified and as directed. Make: Asian Paint, Sikka, Dr Fixit. Note: - (i) Work to be carried out through authorised applicators of the manufactures and work will be carried out in complete / in patches in roofs (ii) Contractor shall submit written guarantee of 07 (seven) years from date of completion & submit security deposit @ 2.5% of executed amount or Rs 6250.00 which ever is more.
65
-
-
Excavating in post holes each not exc. 0.5 cum getting out in soft / loose soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 cm, watering and removing surplus soil to a distance not exc. 50 m and depositing where complete all as specified and directed.
10
-
-
M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation and mass concrete, complete all as specified and directed.
3
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
12
-
-
M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, wind Tie etc Fe 410-W (Gde E-250) quality A complete all as specified and directed by Engineer-in-Charge
1500
-
-
S&F 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L-type or J-type or cranked hook bolts including dismantling of existing roof sheet, complete all as specified and directed.
200
-
-
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing roof sheet complete all as specified and directed.
700
-
-
M&L for preparation of new wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint (first Quality) over a coat of pink primer complete all as specified and directed.
100
-
-
M&L for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint (first Quality) over one coat of red oxide primer complete all as specified.
50
-
-
M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping holes and applying one coat of synthetic enamel paint (first Quality) complete all as specified and directed by Engineer-in-Charge
100
-
-
M&L for preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, and applying one coat of synthetic enamel paint (first Quality) (up to 25 mtrs height) complete all as specified and directed by Engineer-in-Charge
50
-
-
M&L for preparation of old plastered or unplaster surfaces of walls by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.
200
-
-
M&L for preparation of old plastered or unplaster surfaces of ceiling by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.
250
-
-
M&L for preparation of old plastered or unplaster surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of cement base paint of any tint / shade complete all as specified and directed.
1500
-
-
M&L for complete removal of existing treatment of wall / roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour and applying 2 mm thick wall care putty, two coats of oil bound distemper (first Quality) of any tint / shade over one coat primer complete all as specified and directed.
2000
-
-
M&L for preparation of old painted surfaces of ceiling by washing, rubbing down & stopping etc, and applying one coat of oil bound distemper (first Quality) of any tint / shade complete all as specified and directed.
1000
-
-
Deployment of manpower & tools etc for Complete removal of existing treatment on wall / roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed. (Rate included for necessary scaffolding and arrangement for working up to 15 mtrs height).
2000
-
-
M&L for applying minimum 1 mm thick exterior grade wall care putty over prepared plastered wall surface to achieve the surface even and smooth for application of painting complete all as specified and directed. Note:- Rate included for necessary scaffolding and arrangements for working up to 15 m height and working on any type of roof like AC sheet, Galvalume sheet with necessary safety measures.
2000
-
-
M&L for applying two coats of 100% Premium acrylic emulsion, exterior paint on wall surfaces, having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of approved shade (Company Depot tinted) with silicon additives over and including priming coat of exterior primer applied complete all as specified and directed. Make Apex (Asian Paint) / Weather coat (Berger) / Excel Top Guard (Nerolac)
Note- (i) Primer and emmulsion to be carried out through air less spray machin (Mechanical means).
(ii) Rate included for necessary scafolding and arrangement for working up to 15 mtrs height.
2000
-
-
Note For BOQ Item No 80, 81, 113, 114, 115, 116 & 117
-
-
-
The work for removal of old treatment, application of putty, exterior emulsion paint / oil bound distemper & primer etc as catered under BOQ item No 80, 81, 113, 114, 115, 116 & 117 shall be executed through any one of manufacturer viz ASIAN PAINTS LTD / BERGER PAINTS INDIA LTD / KENSAL NEROLAC PAINTS LTD
-
-
-
(a) The work pertaining to removal of old treatment, application of putty, exterior emulsion paint / oil bound distemper & primer etc shall be executed by the contractor as per MoU with any one manufacturer of the materials (as mention above).
-
-
-
(b) The Contractor shall upload with the documents under cover I "Memoradum of Understanding" (MOU) (as per format given in particular specification) with any one of the manufacturers mentioned above along with technical literature of putty, primer & paint indicating consumption of these materials, failing which the bid shall be laible to be rejected.
-
-
-
(c) Work may also be executed in patches and in narrow widths, bands, cornices, pilasters etc and cutting in edge of line where necessary.
-
-
-
(d) Quoted rates shall be deemed to include cost of spreading and removing, covering to doors, windows, floors, fittings etc to protect them from splashes. Cleaning of Drops and splashes of paint from floors, glass, joinery, electric fittings, wirings etc. to the entire satisfaction of Engineer-in-Charge.
-
-
-
(e) Before commencement of work Sample patch of size 10 Sqm shall be prepared at the location directed by the Engineer in Charge. Sample shall be approved by GE in writing.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%