Military Engineer Services Tender

Taking down shutters of any description exc 1.00 Sqm mtr but not exc. 2.00 Sqm in each complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in door opening as per specification and drawings (SSR or TD) complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style ) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded colour plain PVC or channel having a PVC sheet strip of 20mm width stuch in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing complete (SSR or TD) all as specified and directed.

S&F 35 mm thick flush shutters factory made any leaf solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to wooden/steel frame as per drawing (SSR or TD) with one shop coat of pink primer complete all as specified and directed.

S&F 35 mm thk 2nd class Hard wood Kiln seasoned and chemically pressure treated glazed & skeleton shutters, open rebated at prepared to receive glass/gauze (without sash bars) edges of framing plain, chamfered, or rounded, fitted with and incl cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Pt-I, Sec-8, clause 8.24 (a) fixed to chowkhats complete all as specified and directed.

S & F steel window / ventilator with pressed steel frame made out form 1.25mm thick steel having two rebete with glazed shutters and fly proofing shutters with side hinge shutters including projecting lyke hinges with steel handles and steel peg stay with and without glazing bars dovelailed or welded including guard bars/grills of 10mm dia@125mm c/c spacing etc complete all as specified & shown in drg CE/ALD/TD-172 sh 1/2 & 2/2 Note: Wire cloth and glass shall be measured and paid separately under respective item

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for powder coated (min 50 micron, any colour) aluminiuym (sliding type) windows with three track bottom size 92x29.5x1.5mm thick, side and top frame size 92x29.5x1.5 mm and shutters powder coated aluminium 39x20x1.5 mm thick (02 nos glazed and 01 no gauged ) including necessary aluminium fittings like joint cleat glazing and gauging clips/strips, roller, locks and rubber packing, anodized snap beading screws etc with 5 mm thick tinted glass/ SS wire mesh with including all fittingss & fixtures complete all as specified and directed. Note : All fitting/fixtures required for proper functioning of windows including glass panes & wire mesh complete are included in this item and nothing shall be paid extra. MS grill shall be measured and paid separately.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc, complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening including MS hold fast and similar article like tie bars etc. conforming to Fe-290 Gde-E-165-0 complete all as specified and directed.

S&F in repairs aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc including 'E' board classic 4mm thick oceanic sheet of size n.exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid incl preparation of new surface and applying two coats of oil bound distemper over a coat of primer all as specified and directed.

S&F in repair Hollow PVC wall lining consisting of 6 mm thick wood grain printed PVC sheet including to fillets to matchwall lining fixing at site on wall with screw complete all as specified and directed.

S&F Framed work such as grills gratings, etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars; barred iron doors; ladders; framed balusters walk ways; railings framed and hung as gates, including pintle hinges, stops hand-made sliding bolts; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F in repirs single side prelam PVC sheet used instead of Plain colour PVC sheet Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, complete all as specified and directed.

S&F in repairs factory made solid panel both side Pre laminated PVC door used instead of Plain colour PVC sheet. Stile and rails feathered 30mm thick (style ) shutter consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded colour plain PVC or channel having a PVC sheet strip of 20mm width stuch in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregate as in cill, step and for inserting hold fast of doors and windows complete all as specified and directed.

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paints over one coat of primer complete all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coat of synthetic enamel paints over one coat of primer complete all as specified and directed.

S&F 100 mm long medium weight, cold rolled mild steel butt hinges complete all as specified and directed.

S&F Butt hinges 100 mm size, medium weight, cold rolled stainless steel complete all as specified and directed.

S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm complete all as specified and directed.

S&F aluminum anodized barrel tower bolt of extruded section size of bolt 300 mm complete all as specified and directed.

S&F aluminum handle cast type anodized 150 mm size complete all as specified and directed.

S&F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F for 3 mm thick ordinary Sheet glass of ordinary quality and glazing with with aluminium rubber brush strip/fillet or beads, nut bolts or with rivets/pins in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair for 3 mm thick ordinary Sheet glassof ordinary quality and glazing with with aluminium rubber brush strip/fillet or beads, nut bolts or with rivets/pins in square exc 0.5 sq. m in each pane with 25 micron solar control film complete all as specified and directed.

S&F 3 mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares not exc. 0.50 Sqmtr each pane complete all as specified and directed.

S&F in repair 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares not exc. 0.50 Sqmtr each pane complete all as specified and directed.

S&F galavanised mild steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18 mm complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18 mm complete all as specified and directed.

M & L for welding in repairs exc 2.5cm but not exc. 5 cm in length exc. 6mm but not exc. 9mm thickness or metal to be welded and jointed complete all as specified and directed.

S&F in repair 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber / MS frame work including teakwood lipping aroud the board complete all as specified and directed.

S&F in Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F in factory made single extruded WPC (Wood Polymer Composite) solid decorative type Cupboard shutter of size 18 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S & F 30 mm width of flaps open Continuous (piano) hinges mild steel, bright finish or ectro galvanised complete all as specified and directed.

M&L for Providing, cement concrete type C 1 1:3:6 (20 mm greaded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, coping complete all as specified and directed.

Taking down cement plaster on walls/ceiling of any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces on external walls, mixed with water proofing compound. finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on brick/concrete wall surfaces finish even & smooth without unsing extra cement etc complete all as specified and directed.

Supply only Pidi proof 101 LW (+) complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surface of ceiling in cement mortar 1:3 finished even & smooth (without using extra cement) complete all as specified and directed

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat alkali resistant primer complete all as specified and directed. .

M&L for preparation of newly plastered wall surfaces and apply two coat of oil bound distemper over a coat of primer to make smooth surfaces complete all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed.

M&L for post construction anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.

Renewing white or coloured glazed tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed.