Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Pipe Line Project
Eprocure
Opening Date24 Oct 2024
Closing Soon19 Nov 2024
Tender Amount₹ 1,15,00,000
Costs
EMD
₹ 1,90,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_681095_1Tender No
CWE/LKO/W/T-79 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
M&L PCC 1:2:4, type B1 using 20 mm graded stone aggregate using WPC @3% by weight of cement as in roof kerbs / benching / coving and roof padding over roof surfaces /sunken treatment etc rounded or chamfered on edges, complete, all as specified and directed.
Note:- The liquid water proofing compound measured & paid separately relevant Item.
1
-
-
M&L for rendering 15 mm thick in cement mortar 1:6 on fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified.
40
-
-
M&L for rendering 15 mm thick in cement mortar 1:6 on brick wall or concrete surface including finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.
320
-
-
M&L for rendering 15 mm thick in cement mortar 1:4 on brick wall or concrete surface including finishing the surface even and fair including taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.
1050
-
-
Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed.
320
-
-
M & L for Providing and applying minimum 1mm thick wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed.
770
-
-
Material & Labour for preparation of new/ old plastered surfaces of finished walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Note- Primer and emulsion to be carried out through air less spray machine ( Mechanical means)
770
-
-
Complete removal of existing treatment of wall and M&L for two coats of oil bound distemper on previously treated plastered surfaces of wall over one coat of primer and 1mm thick layer of wall care putty including preparation of surfaces complete all as specified and directed.
340
-
-
M&L for two coats of oil bound distemper over one coat of primer and 1mm thick layer of wall care putty on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.
342
-
-
M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement incl taking down existing cement plaster, complete all as specified.
40
-
-
Supply only liquid water proofing compound, ISI Marked.
20
-
-
M&L for preparation of new ceiling surface and applying two coat of oil bond distemper including one coat of wall care putty upto smooth surface complete all as specified and directed.
40
-
-
Complete removal of existing treatment of ceiling and M&L for preparation of old ceiling surfaces and applying two coat of oil bond distemper including one coat of wall care putty upto smooth surface complete all as specified and directed.
240
-
-
M& L for Vitrified tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding , removing and rubbish off the premised etc complete all as specified.
285
-
-
All as per above item No.17 above but on vertical surfaces including 10mm thick screed plaser in CM 1:4 , complete all as specified and as directed.
40
-
-
M&L for Non skid ceramic colour floor tiles shade as approved size 7-8mm thick area of each tile exc 0.06 sqm but not exceeding 0.11 sqm set on 15mm thick in near cement screed(1:6) slurry and pointed incl white or colour cement to matchincluding dismantling floor, hearth or wall tiling including cement mortar bedding , removing and rubbish off the premised etc complete all as specified.
48
-
-
M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screed in CM 1:4 including cutting, polishing, rubbring & moulding of edges including demolition of stone slab complete all as directed.
18
-
-
Supply and fixing of 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing PLP/GI tubing making good and complete all as specified and directed.
1915
-
-
Supply and fixing of 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing PLP/GI tubing and making good complete all as specified and directed.
1065
-
-
M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls all as specified and directed.
2875
-
-
S&F in repair Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. including vitreous China valveless, syphonic action type,flushing cistern, low level,white, with inlet, ball valve, float and handle including brackets complete in all respect all as specified. complete all as specified and directed.
6
-
-
S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160m including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink incl 40mm dia Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) all as specified and directed
2
-
-
S & F stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete, all as directed.
2
-
-
S&F PTMT grating 125mm dia with waste hole (Minimium weight 40 grams) complete all as specified and directed.
8
-
-
S&F PTMT grating 125mm dia without waste hole (Minimium weight 40 grams) complete all as specified and directed.
8
-
-
S&F PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete, all as specified.
420
-
-
S&F in repair single lever wall mixture 3-in-1 system with provision for overhead shower with 115 mm long bend pipe, connecting legs and wall flange(without over head sower) screwed down for 15 mm bore GI pipe complete all as specified and directed.
46
-
-
S&F long body 15mm bore bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.
30
-
-
S & F toilet paper holder CP fixed complete all as specified and directed .
6
-
-
S&F glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete, all as specified and directed.
6
-
-
Supply & fix sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.
6
-
-
S&F CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified.
6
-
-
Supply and fixed in repairs 900x600mm bevelled edges mirror of selected quality mounted on wall fixed with persome Stainless Steel Frameless Clamp Hardware size 19mm X 25mm, Silver complete all as specified.
6
-
-
S&F PVC(SWR) 75 mm bore floor trap plan with grating including jointing with solvant cement complete all as specified & as directed.
14
-
-
S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. incl dismantling of existing water tank, complete all as specified and directed.
6
-
-
S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore, all as specified and as approved by GE/Engineer-in-Charge.
8
-
-
Taking down of PVC/AC/CI/SSW 100mm/75mm bore pipe drain pipes, set in cement mortar including PCC haunching and bedding, complete all as specified and directed
60
-
-
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.
10
-
-
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as directed.
22
-
-
S&F 110mm bore PVC (SWR) bend, any radius complete all as specified and directed
12
-
-
S&F 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed
12
-
-
S&F 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.
6
-
-
M&L PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed
8
-
-
Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each, complete, all as specified & directed.
30
-
-
Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete, all as specified & directed.
28
-
-
M&L plain cement concrete cast in situ 1:3:6 type C1 using 20 mm graded stone aggregate as in copings ,hold fast,back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work all as spcefied and directed
0.5
-
-
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge. incl M.S. hold fast/ lugs or SS dash fasteners complete all as specified and directed.
Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
50
-
-
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge. incl M.S. hold fast/ lugs or SS dash fasteners complete all as specified and directed.
Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
90
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid both side decorative type (Laminated both side) flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge incl stainless steel butt hinges and necessary S.S screws complete all as specified.
50
-
-
M & L 30 mm thick Factory made solid WPC (Wood plastic Composit) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture including SS wire mesh (G-304) 0.36 mm minimum dia of wire and average width of aperture 1.4 mm shall be fixed with 15 x 15 square tube in side rails with screwing 8 x 28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufacture instruction complete all as specified and complete all as specified and directed.
14
-
-
S & F of Stainless steel ISI Mark Butt hinges 100mm size as directed.
114
-
-
S & F of 200mm long MS Cromium plated barrel tower bolts of extructed section as directed.
56
-
-
Supply& fix MS ordinary pattern spring "plate type" including roller & roller plate complete as directed. Make -"Ritz"
10
-
-
S&F of MS Cromium plated sliding door bolt 250mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified.
24
-
-
S & F of 200mm size Extruded aluminium alloy powder coated handles (As per sample kept in sample room) fancy type, fabricated type, anodised all as per direction of Engr-in-Charge.
76
-
-
S&F in repair 25 mm dia stainless steel curtain rod (weight not less than 200 gm/ RM) superior quality with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed.
120
-
-
M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
760
-
-
S&F Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm ,5mm thick plain glass and required ccessories.area nexc 3 sqm complete all as specified and directed.
(Note: The unit rate quoted by contractor includes cost of glass, wire mesh and includes all other connected accessories. Net Opening will be measured for payment purpose.)
35
-
-
S&F Powder coating Anodized aluminium frame for doors, windows, ventilators with one or more rebates using 1.50mm thick aluminium section including joining cleat for fixing etc. complete all as specified
16
-
-
S&F powder coating anodized aluminium glazed window and ventilator shutters, side hung/ top hung type without sash bars, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 01 no. 150mm long peg stays, 02 nos. 100mm long hinges type B-21, 01 no. 150mm long tower bolts and 01 no. 125mm long handles complete all as specified
4
-
-
S&F 4mm thick figured glass pin headed type and glazing with oil putty in square n exc 0.5 sqm in each pan as directed.
4.3
-
-
S&F kitchen WPC cabinet in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18mm thick pvc sheet & provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets S S screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finishincluding all necessary fittings as per site requirementand as per make and specification mentioned as per drawing and all are specified and directed by Engineer-in-charge on site.
100
-
-
S&F ball cateches with 8 mm dia steel bal and brass body and strike plate magnet ball catcher for cup board shutters.
55
-
-
Supply and fixing 30 mm width of flaps continuous piano hinges Mild steel, bright finish or electroglavanised complete all as specified and directed.
175
-
-
S & F Stainless steel handle 150 mm long superior quality screw and washer of mild steel, bright finished all as specified and directed
40
-
-
Demolition of reinforced cement concrete in floors ,beams ,chajjas,landing slab in any position or height and similar suspended works
1
-
-
M/L RCC 1:2:4 type B1 (using 20 mm graded aggrigate) as in slab,chajjas,beam etc complete.
1
-
-
Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thick
20
-
-
S&F in repair Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed in bedding layers in CM 1:6 complete all as specified and as directed.
40
-
-
M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even without using etra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and as directed.
131
-
-
Demolition of brick work built in CM completed all as specified and directed.
184.8
-
-
Demolition of Precast cement concrete louvres and jallies, 25m thick (measured solid ) completed all as specified and directed.
144
-
-
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation and getting out soft/loose soil etc. (including cutting of roads) or for shafts, wells, cesspits, manholes and sewage lines, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth complete all as specified and directed.
359.59
-
-
M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass filling concrete etc including necessary formwork complete all as specified and directed
28.7
-
-
M & L brick work with fly ash bricks straight or curved on plan exc 6m mean radius in CM 1:4 completed all as specified and directed.
83.86
-
-
M & L for 15mm thick rendering in CM (1:6) on other than fair faces of brick/concrete surfaces, finished even and smooth (without using extra cement) complete all as speciified and directed.
210
-
-
M & L for reinforced cement concrete (designmix) in M-25 (20mm graded aggregates) for foundations, including rafts, footings, foundation beams; plinth beams bases for columns, etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
61
-
-
M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams ,and similar work; vertical or to batter for rough finished surfaces of concrete surfaces complete all as specified and directed.
319.48
-
-
M & L for reinforced cement concrete (designmix) in M-25 (20mm graded aggregates) for Columns, pillars, piers, posts and struts complete all as specified and directed.
14.98
-
-
M & L for formwork to sides of square pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete surfaces complete all as specified and directed.
229.32
-
-
M & L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
796.27
-
-
M & L for TMT steel bars 5mm dia and over upto 10mm dia in stirrups, spacers and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
1052.45
-
-
S & F in angle iron as in posts, struts in fencing including cutting top to shape required,welding, drilling holes, notching for wire etc and similar work conforming to Fe-290 Gde E-165 complete all speciified and directed
369.68
-
-
M & L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in Coping including necessary form work finished even & smooth with using pigment in cement complete all as specified and directed
6
-
-
S & F in galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire complete all speciified and directed
16.8
-
-
M & L for preparation of new steel/iron surfaces exceeding 10cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all speciified and directed
156.96
-
-
M & L for Preparation of new surfaces of wall and applyingTwo coat of cement base paint over a coat of primer complete all as specified and directed.
630
-
-
Removing excavated material exc.250m but nexc 500m & depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed
121.8
-
-
M&L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 including precast concrete articles complete all as specified and directed.
15
-
-
M&L for rendering 15 mm thick in cement mortar 1:4 on fair face of brick work of walls, finished even & smooth without using extra cement, complete, all as specified.
22
-
-
M&L PCC 1:2:4, type B0 using 12.5 mm graded stone aggregate as in roof kerbs / benching / coving and roof padding over roof surfaces etc rounded or chamfered on edges, complete, all as directed.
1
-
-
M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors joints free, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
170
-
-
M&L for glazed ceramic tiles (coloured) 300x450x7mm/300x600 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
605
-
-
S&F in repair of CP grating 125mm dia with waste hole (Minimium weight 40 grams) complete all as specified and directed.
70
-
-
S&F in repairs of CP grating 125mm dia without waste hole (Minimium weight 40 grams) complete all as specified and directed.
70
-
-
Supply & Fixing in repair CP Brass shower rose fancy type 125mm thick with or without swivel joints any size including fixed to steel pipe or union as directed.
87
-
-
S&F in repair hand shower (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long flexible pipe with wall hook bracket etc. and all fittings for EWC complete all as specified and directed.
Make :- Jaquar Cat part No. ALD-565/ Parryware Cat part No. T9962A1/Hindware Cat part No. F160068
151
-
-
S&F in repair long body 15mm bore bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.
170
-
-
S&F and repair CP angle valve long body for 15 mm bore pipe with capstan head long screwed shank including CP cover plate fancy type all as specified and directed
182
-
-
S & F in repairs of Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) as per direction of Engr-in-Charge.
120
-
-
S & F in repair of plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hanging device complete all as specified and directed.
60
-
-
S&F in repair 15 mm bore CP brass Central Hole Basin/ kitchen mixture fixed to GI pipe.complete all as specified and directed
61
-
-
S & F in repairs Brass spindle for mixer/wall mixer of any type or pattern complete all as specified and directed.
365
-
-
S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks white colour double layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe including dismantling PVC water tank all as specified and directed.
39
-
-
S&F in repair of 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.
125
-
-
M & L for rendering 10 mm thick in cement mortar 1:3 on roof surfce/ paraped( using 100% coarse sand) with using liquid water proofing compound (ISI marked) (as per direction of Engr-in-charge) and finishing the surface even & smooth without using extra cement complete all as specified and directed. Note : - Supply only water proofing compound shall be measured and paid for separately.
550
-
-
S & F of CI spun Hubless Pipes 100 mm bore single socketed in any length socketed in any length in trenches or in floors with shield coupling SS (304) with EPDM rubber gasket but fixed to walls including taking down old pipe complete all as specified and directed Make: Neco
290
-
-
S & F of CI spun Hubless Pipes 75 mm bore single socketed in any length socketed in any length in trenches or in floors with shield coupling SS (304) with EPDM rubber gasket but fixed to walls including taking down old pipe complete all as specified and directed Make: Neco
40
-
-
S & F of CI spun Hubless bends any radius 100 mm size complete all as specified and directed.
160
-
-
S & F of CI spun Hubless bends any radius 75 mm size complete all as specified and directed.
90
-
-
M & L of repair 100 mm dia CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as speciifed and directed.
15
-
-
M & L of repair 75 mm dia CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as speciifed and directed.
70
-
-
S & F of 100mm bore pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays or hold fast(brass/ stainless steel), including bolts and nuts and securing ends of stays to wall or roof any type complete all as specified and directed.
150
-
-
S&F 'E' board everest make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be poweder coated white. The frame work shall comprise of main runner made from 0.33 mm thick GS sheet and of size 24x32x300mm abd soaced at 1200mm centers securely fixed to be structural soffts by approved hangers at 1200 mm maximum centrers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug level and justers and screws etc. The last hanger at the end of each main runner shall not be grater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm center to from 1200x600mm modules cross tee longer than 600mm to be supported independtly. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour including dismantling of false ceiling and boarding any description all as per manufacture insturction.
225
-
-
Excavation in post holes in (or similar holes) each n.exc 0.5 cum, getting out in any type of soil, returning, filling in and ramming earth or broken bubble mixed with earth arround in layers n.exc 25 cm thick and removal of surplus soil compleate all as specified.
36
-
-
M&L for cement concrete 1:2:4 type B-2 (40mm graded) stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
1.46
-
-
S&Frolled mild steel in joist, channel, angle or tee sections, circular tubes fixed independently as in post, pillars stanchions etc (FE-290 Gde E165) complete including cutting grinding welding etc as required complete all as specified and as directed.
1150
-
-
S&F framed work as in gusset plate for framed truss, rafters, rails braces etc complete, drilling for fixing of steel sheeting or other covering, door etc to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fitting etc with welded, riveted or bolted of Fe-410 Gde 250A complete all as specified and as directed.
1000
-
-
S&F for MS steel work as in rectangular purlins, rafters and similar item complete including cutting, griding, welding etc as required (F290 Gde E-250) complete all as specified and directed.
1000
-
-
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing (F290 Gde E-250) complete all as specified and directed.
2000
-
-
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.
200
-
-
Surface Excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and as directed.
300
-
-
M & L for hard core of broken stone or boulder of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surface complete including filling interstices with approved fine material like earth or grit etc Complete all as specified and dirtected.
20
-
-
M & L for 75 mm thick Cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base etc complete all as specified.
360
-
-
M & L for 60 mm thick rubber moulded Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.
300
-
-
M&L sand cushining under interlocking paver blocks.
16
-
-
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed.
100
-
-
S&F PVC solid door frame of size 50x47mm made out of 5m plain coloured sheet reinforced with MS square tube & with wood grain printed complete all as specified and directed.
28.5
-
-
S&F 30mm thick PVC factory made panneled door shutter with wood grain printed & decorative beading with 10mmx10mm as per IS- 4020 made from MS tube of top and bottom rods. MS frame shall be covered with heat maulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Pannelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as per specification and drawings, complete all as specified and directed.
18
-
-
S&F 250 mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
24
-
-
S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed.
6
-
-
S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.
6
-
-
S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and directed.
12
-
-
S&F in repair fancy type pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipes and fixed for 15mm dia complete all as specified and directed.
6
-
-
S&F 15 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed.
6
-
-
S&F in repair 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed.
6
-
-
S&F IInd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed complete all as specified and directed.
0.05
-
-
M&L 30 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
20
-
-
Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.
20
-
-
M & L 18-20mm thick polished granite work bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing and bull nosing exposed edges complete over and including 20mm thick screed bed or bedding layer of CM 1:4 complete all as specified and directed.
50
-
-
M & L for 75 mm thick PCC 1:3:6 type C-2 using 40mm stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.
95
-
-
Taking down carefully copper/aluminium point wiring(light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose,fan regulators, sketch light fittings, and making good the disturbed surface of walls and floors etc as directed.
190
-
-
Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls as directed.
4
-
-
Taking down carefully copper/aluminium sub main wiring/ service connection including teak wood batten/ conduit and making good the disturbed surface of walls as directed.
260
-
-
M&L, Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S. cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:-(NOTE: Switch and socket to be measured and paid for separately):- (a) One light/fan point controlled by one switch
118
-
-
All as per item No.148 abovebut for One socket outlet point 5 Amp on an independent board
28
-
-
All as per item No.148 above but on the same board
16
-
-
All as per item No.148 aboveCall bell / buzzer point controlled by one bell push
4
-
-
All as per item No.148 above For one light point controlled by two 2-way switches, with cable 1.5 sqmm
4
-
-
All as per item No.148 above herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15/20 Amp socket out let point on an independent board.
20
-
-
S & F switch piano flush button single pole one way 5 Amp 240 volt complete as directed.
162
-
-
S & F switch piano flush button single pole one way 15 Amps complete all as specified.
20
-
-
S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 230 volts complete as directed.
20
-
-
S & F socket outlet flush type 5 pin 5 Amps 240 volts complete as directed
44
-
-
S & F ceiling rose surface bakelight two to three terminal complete as directed
82
-
-
S&F bell push single pole one way 5 Amp socket outlet point on an independent board .
4
-
-
S&F Call bell AC single pole 230 Volts Ding dong complete all as specified and directed.
2
-
-
S&F angle type holder insulated body with back plate suitable for batten fittings as directed.
16
-
-
S&F fan regulator electronic, step up socket type, 230 volt and conection complete all as directed
14
-
-
Supply and fixing in repairs LED lamp 7/9 watt, complete all as specified and as directed.
16
-
-
Supply and fixing in replacement of wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 8/10 W, 6500 K, 230V ,120 lumens/watt, CRI 80 , Min Burning hours 25000 , IP 20 with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge. Makes shall be provided group A cat as per latest approved make given by HQ CECC
6
-
-
Supply and Fixing in repalcement of wall/surface mounting luminaires integrated LED Batten 20 W, 6500 K,120 lumens/watt,CRI 80, 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete incl Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.Makes shall be provided group A cat as per latest approved make given by HQ CECC
40
-
-
S& F in repair Decorative wall light fixture wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed. Makes shall be provided group A cat as per latest approved make given by HQ CECC
16
-
-
S&F in repair LED Building security light 24/25 Watt with high power LED source (110lumen/watt) PDC housing, IP66 Min Burning Hrs 25000 hrs and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts. Makes shall be provided group A cat as per latest approved make given by HQ CECC
8
-
-
Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED, 6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed. Makes shall be provided group A cat as per latest approved make given by HQ CECC
8
-
-
S & F in repairs integrated LED type Post top lantern with high power 25/30 W LED as light source, energy saving, 120lumen and Min Burning hrs 25000 environmental friendly, long life asethetically designed with symmetrical light distribution,spun auminium landscape lumainaire incl LED driver complete and incl neceesary electrical connection all as directed Makes shall be provided group A cat as per latest approved make given by HQ CECC
4
-
-
M&L for two single core PVC insulated FRLS cable 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25 mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)
80
-
-
M&L for two single core PVC insulated FRLS cable 4 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)
180
-
-
S & F MCB DB TPN 4 Way (Vertical Type) double door, for mounting, MCBs, isolator, ELCBs etc factory made, confirming to IS: 13032 fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral link and 200 Amps rated bus bar , DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of same make as MCBs /Isolator. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way as specified. The DBs shall be of IP 42 protection class.
2
-
-
S&F in repairs MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA complete as directed.
2
-
-
S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 12 ways 240 volt with 200 Amps rated bus bar made out 1.2mm thick double door complete all as specified. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’)
2
-
-
S&F MCB SPN 32 to 63 Amp 240 volts 10 KA breaking capacity complete as directed.
2
-
-
S&F MCB SP 10 to 32 Amp 240 volts 10 KA breaking capacity as directed.
44
-
-
Supply and fixing modular ac box power unit with socket plug top and MCBs with a two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified. Make: ABB/Havells/C&S
10
-
-
Taking down electric meter and refixing on new board after rewiring in replacement of unservicable wire complete all as directed.
4
-
-
Taking down ceiling fan 1200/1400 mm sweep any type and refixing after oiling, gressing and painting with writing the MES no including electric connetion work complete all as specified and directed.
14
-
-
Taking down Exhaust fan 350/450 mm sweep any type and refixing after oiling, gressing and painting with writing the MES no and any reqdof anchorfastner nut bo;t washer , including electric connetion work complete all as specified and directed.
4
-
-
Taking down water heater (Geyser) 25/50 ltr capacity or any type and refixing after overhalling and painting with writing the MES no and 4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos flexible steel hose pipe of size 15 mm, 450 mm lenght & suitable plug top of 16 Amp capacity complete all as specified and directed.
4
-
-
Supply and fixing exhaust/fresh air fan 230/240 V of size 250 mm sweep (PVC body) 1100-1325 RPM with louvers including provn of flexible three core cable from ceiling rose to terminal for making connection , fitting on wall including all necessary fixing accessories complate all as specified and as directed. Make:- Havells Ventil air DX 250mm/Usha Crip air LX 250mm/ Bajaj maxima DX 250mm
6
-
-
Supply & Laying or passing through pipe, 1100 volt grade heavy duty cable with XLPE insulated Aluminum condector served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of 10 Sq mm 2.0 core stranded condector nominal cross section all as directed by Engr - in - Charge.
80
-
-
Supply, laying or passing through pipe and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sq mm 3.5 core complete all as specified and directed.
130
-
-
Excavation in trenches in soft/loose soil n.exc 1.5M wide and n. exc 1.5 M depth and getting out, including framing bottom surface for laying cables and all as specified
18.9
-
-
Returning, filling in soil watering and ramming into layers of 25cm after laying of cable all as specified and directed.
242.82
-
-
Disposal of surplus soil n.exc 50M distance from the starting point and depositing where all as specified and directed.
13.88
-
-
M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) all as specified and directed
12.15
-
-
Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable all as specified and directed.
0.87
-
-
M & L for Earthing complete with glavanised steel earth plate elactrode 600x600x6 mm thick buried directly in ground with top edge of the plate not less 1.5 mtr deep below with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber , reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate no 5 of MES SSR Pt-I 2009 print and as directed.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%