Military Engineer Services Tender

M&L for point wiring concealed type with 1.50 sqmm FRLS PVC insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.5 sqmm FRLS PVC insulated unsheathed multi stranded copper conductor cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20 mm dia with its accessories, pressed steel terminal box made of 1.2 mm thick MS sheet/anodised steel box, painted with one coat of red oxide primer including 3.0 mm thick ISI marked laminated sheet cover for fixing switches/ socket/ regulators etc and making good the disturbed surfaces by applying putty 1mm thick and matching with colour of the adjoining wall for one light/ fan/ exhaust fan point controlled by one piano type switch 5 Amps single pole one way etc complete all as specified & directed.

All as per srl item no. 4 above but for 3/5 pin socket outlet for 5 Amps on independent board with 1.5 sqmm PVC insulated, unsheathed single core multistranded copper conductor cable 1100 volts grade including 1.50 sqmm PVC insulated unsheathed multi-stranded copper conductor cable as earth continuity conductor etc complete all as specified & directed.

All as per srl item no. 4 above but for 3/5 pin socket outlet for 5 Amps on same board.

All as per srl item no. 4 above but for 3/5 pin socket outlet for 15 Amps on independent board with 2.5 sqmm PVC insulated, unsheathed single core multistranded copper conductor cable 1100 volts grade including 2.50 sqmm PVC insulated unsheathed multi-stranded copper conductor cable as earth continuity conductor etc complete all as specified & directed.

Supply & fix switch piano, flush type single pole, one way 5/6 Amps, 240 volts etc complete all as specified & directed.

Supply & fix socket outlet 2 in 1, 3 pin 5/6 Amps, flush universal type etc complete all as specified & directed.

Supply & fix switch piano, flush type single pole, one way 15/ 16 Amps, 240 volts etc complete all as specified & directed.

Supply & fix socket outlet 2 in 1, 3 pin 5 and 15 Amps, flush universal type etc complete all as specified & directed.

Supply & fix ceiling rose, surface bakelite, of size 32.5x25mm surface type, three terminals, AC 240 volts etc complete all as specified & directed.

S&F in replacement surface/wall mounting LED batten, 20 watt LED lamp fittings extruded aluminium housing provided for efficient heat dissipating with poly carbonate diffuser & intergrated industrial grade heavy duty electronic driver, including lamp of 20 Watt etc complete all as specified and directed.

Supply & fix rotary stepped type electronic fan regulator mini flush type 120/ 280 Volts etc complete all as specified & directed.

S&F in repair for flame proof switch socket & plug combined point controlled by single pole one way 16 Amp ON-OFF rotary switch. Flame proof switch socket & plug combined in LM6 cable termination box in (LM-6), 16A 250V, 2P+earth etc complete all as specified and directed.

S&F in repair flame proof weather proof rotary switch with cable terminal box in cat aluminum alloy ( LM-6) construction, epoxy powder coated, single pole 16 Amp ON/OFF type, 230 V AC, certified by CMRS for Group IIA & IIB complete including compression glands etc complete all as specified and directed.

S&F in repair flame proof LED tube light fitting CIMFR certified flame proof batten suitable for single T8 tube of 16W/20W. Recommended for Gas/Vapour group of IIA & llB and Zone 1 & 2 .IP65 Protected LED flameproof made of aluminium alloy LM6 etc. complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size etc complete all as specified and directed.

S&F in repair isolator, SPN, AC, 240 volts of 6-32 Amps for inductive load connected through cable lugs of suitable size etc complete all as specified and directed.

S&F in repair MCB, SP, AC, 240 volts of 6-32 Amps, 'C' series complete all as specified and directed.

S&F in repair flame proof weather proof rotary switch with cable termination box in LM6 MCB single pole 6 to 16 Amp 10 KA 220 volt 50 Htz , 16 Amp Single pole ON-OFF as per existing etc complete all as specified and directed.

S&F in repair flame proof, weather proof rotary switch with cable termination box in LM6 MCB double pole 25 Amp 10 KA 220 volt 50 Htz , 25 double pole ON-OFF as per existing etc complete all as specified and directed.

M and L for disconnection and taking down any type and any watt tube light fitting from wall/ceiling for cleaning & repair including replacement of worn out parts to make it fully functional and re-fixing on existing location etc complete all as specified and as directed. Note : Replaced parts will be measured and paid separately as supply only under respective items of BOQ.

Supply only 20 W , Photon ultra plus LED tube light rod with new Ultra bright LED polycarbonate tubelight with 10% THD with very high efficiency suited for installation in existing old serviceable T8 tube light batten fitting with G13 lamp holders etc complete all as specified and as directed

S&F in repair 150 watt , LED, IP65 flood light fitting with lens complete energy saving,environment friendly , long life ,exclusive innovative die-cast aluminium housing etc complete all as specified and directed.

S&F in repair LED street/security light fitting of 60 Watt complete with new generation energy saving and environmental friendly long life versatile pressure die-cast aluminium IP 66 roadway luminarise with high power LEDs, fixed on walls with and including suitable size of FI clamps , GI Pipe 40 mm dia, light grade 1.5 mtr long in shape etc complete all as specified and directed.

S&F in repair Air termination, single pointed aluminium rod of 12mm dia and 300mm long etc complete all as specified and as directed.

S&F in repair Test point terminal block made of gun metal or phosphorus bronze of size 75x75x25mm, drilled screwed including 3 Nos, 8mm dia, 25mm long hex head screw etc complete all as specified and as directed.

S&F in repair Copper strip of size 20 x 3 mm with DMC type saddles/insulators or as earthing electrode and fixing screws etc. complete all as specified and directed.

S&F in repair of galvanised strip of size 25 x 4 mm with DMC type saddles/insulators or as earthing electrode and fixing screws etc. complete all as specified and directed.

S&F in repair of galvanised strip of size 32 x 6 mm with DMC type saddles/insulators or as earthing electrode and fixing screws etc. complete all as specified and directed.

S&F in repair of aluminum strip of size 25 x 3 mm with DMC type saddles/insulators on roof/wall and connecting to test point etc complete all as specified and directed.

M&L in repair 40mm dia GI tubing light grade etc complete all as specified and directed.

Taking down of hanging / loose GI earthing strips/aluminium strips/earthwire leads of any size from the roof / wall of building of any height and refixing with suitable size of insulators and fixing arrangement etc complete all as specified and directed.

M&L for earthing pit in PCC (1:3:6:) type C-1 (using 20mm graded stone aggregate) of size 550x550x300 mm with base 40mm thick of PCC 1:4:8 type D-1 (using 20mm graded aggregate) including suitable size of GI wiremesh, PGI funnel and disposal of old broken pit including all necessary earth work in any type of soil etc complete all as specified an directed.

M&L for painting of earthing pit and pit cover with one coat of primer and two coats of synthetic enamal paint and indicate with colour code of Red & Yellow as reuired at site including preparing of surfaces etc complete all as specified and directed.

M&L for PCC (1:3:6:) type C-1 (using 20mm graded stone aggregate) as in base support of struts and other similar etc with and including all necessary form work etc complete all as specified an directed.

M&L for earthing complete with galvanised steel plate electrode of size 600mmx600mmx6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below from ground level with top edge of the plate not less than 1.5 Mtrs below from ground level, connected to glavanised iron strip of size 25 x 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel connected to earthing test point including necessary excavation and earth work in any type of soil and disposal of surplus soil to a distance as directed incl 40 mm GI tubing light grade and necessary fitting for protection of galvanised strip incl filling of charcoal dust and common salt in alternate layers surrounding the earth pit and earth pit shall be constructed in PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) 40mm thick RCC cover of RCC (1:2:4) type B-1 (Using 20 mm graded stone aggregate) reinforced with 6 mm dia round bar @ 75mm C/C both ways with 150mm size MS handle made out of 12mm dia MS bar, 15mm thick plastering with CM (1:6) internally and upto 150mm below ground level externally, PGI funnel with 20mm dia GI pipe medium grade for watering and GI wire mesh etc complete all as specified and shown on electrical plate No 3 of SSR Part-I (2009) and connected to earth test point incl testing complete all as specified and directed. Note :- (i) GI strip and light grade GI protection pipe upto 7.5 mtr shall be deemed to be included in the quoted rates. (ii) The result of earthing value of each earthing pit shall be below 5 Ω (Ohm) (iii) Excavation and all earth work shall be deemed to be included in the unit rates as quoted by the contractor.

M&L for chemical earthing with copper earth plate electrode of size 900x600x5mm burried directly in earth pit not less than 4.7 mtr below normal ground level and size of pit 1.6 mtr x 0.61 m x 5.10m, earth plate connected to copper strip of size 32x6 mm by means of copper/brass nut, bolt duly brazed. Earth strip protected with 40 mm bore light grade GI pipe from electrode and upto 20 mm bore GI watering pipe, medium grade including PGI funnel GI wiremesh providing alternate layer of 10 cm thick each charcoal, salt and magnesium suplhate layer upto 1.20mtr depth and 2kg copper sulpate to be added around the plate for better result and including necessary excavation in any type of soil, returning in filling , removal of surplus soil to a distance not exceeding 50m, earth pit shall be constructed in PCC 1:2:4 type B1 (using 20 mm graded stone aggregate), 40 mm thick RCC Cover in RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) reinforced with 8 mm dia MS defermed bars @ 100 mm C/C both ways incl testing complete all as specified and directed. Note (i) Copper strip and light grade GI protection pipe upto 7.5 mtr shall be deemed to be included in the quoted rates. (ii) The result of earthing value of each earthing pit shall be below 1 Ω (Ohm). (iii) Excavation and all earth work shall be deemed to be included in the unit rates as quoted by the contractor.

M&L for MS sheet of size 30 x 20cm & 2mm thickness fabricated to shape of square/round/triangle as per sample including 10mm dia MS bar (90 cm long), framed work with shape of 'T' etc, necessary welding, earth works, etc including painting by applying two coats of synthetic enamel paint over a coat of red oxide primer and marking of TESTED ON -------, RESULT -------------with different colour of synthetic enamel paint with suitable size of letters and all fixing arrangements including grouted in ground by using PCC (1:3:6) type C-1 (Using 20 mm graded stone aggregates) of size 150x150x150mm etc complete all as specifed and directed .

Excavation in trenches in soft/ loose soil n.exc 1.5m wide and n. exc 1.5m depth for laying of cable, errection of poles, stay and pipe line,and getting out etc complete all as specified and directed.

Returning & filling including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in soil etc complete all as specified and directed.

Removing excavated soil n. exc 50 m and depositing where directed at a level n.exc. 1.5 mtr above the starting point etc complete all as specified and directed.

M&L for laying of bricks locally available, sub class 'B' bricks (old size) for cable, protection, cover, laid flat and dry in trenches, over the cable prependicular to the direction of cable etc complete all as specified and directed.

Labour only for re-laying of old serviceable bricks retreived from taking down for cable protection cover, laid flat and dry in trenches over the cable prependicular to the direction of cable etc complete all as specified and directed.

M&L for local sand coushioning with dry and clean river sand over and under the cable for protection of cable , 80 mm thick sand laid before laying the cable, 150 mm thick sand after laying the cable etc complete all as specified and directed. Note : Thickness of sand will be measured after punning for payment purpose.

Taking down and relaying XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of sizes 10 sq mm, 3.5/4 core laid in trenches or fixed on wall/floor/pole at diferent location etc complete all as specified and directed.

Supply and lay in repair XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of size 10sq mm, 4 core in trenches or fixed on wall/floor/poles etc complete all as specified and directed.

Supply and lay in repair XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of size 16sq mm, 4 core in trenches or fixed on wall/floor/poles etc complete all as specified and directed.

Supply and lay in repair XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of size 25sq mm, 4 core in trenches or fixed on wall/floor/poles etc complete all as specified and directed.

Supply and lay in repair XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of size 35sq mm, 3.5 core in trenches or fixed on wall/floor/poles etc complete all as specified and directed.

Supply and lay in repair XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of size 50sq mm, 3.5 core in trenches or fixed on wall/floor/poles etc complete all as specified and directed.

Supply and lay in repair XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of size 95sq mm, 3.5 core in trenches or fixed on wall/floor/poles etc complete all as specified and directed.

Supply and lay in repair XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of size size 185sq mm, 3.5 core in trenches or fixed on wall/floor/poles etc complete all as specified and directed.

M&L for End jointing kit suitable for LT 1100 volts cable (earthed) for out door , heat shrinkable type complete with jointing material and accessories suitable for XLPE armoured aluminium conductor cable etc complete all as specified and directed of the following sizes :-

10 to 50 Sqmm 3.5 core

70 to 120 Sqmm 3.5 core

150 to 240 Sqmm 3.5 core

M&L for drilling suitable dia horizontal bore holes for insertion / laying of 50/100 mm bore GI tubing of any description below/under road surface/floors etc with using mechanical or manual devices as required at site including making good disturbed surface to match with the existing strata after laying pipes etc complete all as specified and as directed.

Supply and fixing of GI tubing 'light grade' of 50 mm bore for cable protection on pole/wall/floor/or in trenches and drain etc complete fixed with necessary MS clamp, nut, bolts and washers and socket etc complete all as specified and directed.

Demolition of PCC/Black bitumen road of any description and in any position not otherwise specially provided , etc complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20 mm gradded stone aggregate for coping of poles, foundation panel board plat form etc complete all as specified and as directed including necessary from work.

M&L for rendering 10 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces etc complete all as specified and as directed.

Supply and fix in repair MCCB of the following sizes on existing LT panel board including taking out of old unserviceable MCCB from the LT panel board etc complete all as specified and as directed -

MCCB 4 pole , 400 amp rating of 36 KA

MCCB 4 pole , 250 amp rating of 25 KA

MCCB 4 pole , 200 amp rating of 25 KA

MCCB 4 pole , 160 amp rating of 16 KA

MCCB 4 pole , 125 amp rating of 16 KA

MCCB 4 pole , 100 amp rating of 16 KA

MCCB 4 pole , 63 amp rating of 16 KA

S&F in repair Weather Proof thermo plastic (Polysterene) Cable Junction box with 4 aluminium strip bar(25x3 mm) , having protection class IP-65 and of overall size not less than 205mm x 255mm x 112mm having metric knockouts on the wall, duly fixed with the pole with suitable size of GI clamps GI bolts, nuts, washers and 2 Nos polymide weather proof cable glands (Complete with check nut) and including 1 No. 6 Amps SP MCB etc complete all as specified and directed.

M & L for Painting to existing LT Panels, angle iron support bracings, clamps etc. with two coats of aluminium paint superior quality of approved make on exposed external steel surface above PCC benching including preparation of old painted surfaces by scraping etc complete all as specified & directed.

M & L for preparation of old painted surface of steel tubular poles of 9 mtr long including cross arms, cable protection pipe, bus bar box and painting of complete area of pole with one coat of aluminium paint from 1.5 mtr above ground level to top of pole and making alternate strips/layers (30 cm wide) with white and blue synthetic enamel paint upto the 1.50 meter height from the ground level including writing the pole number in white letters on black background and cleaning/cutting the grass/bushes at a radius of 2 mtr surrounding the pole etc complete all as specified and directed.

Supply and fixing in repair 2 core, 1.5 Sqmm PVC insulated heavy duty electric cable unarmoured with stranded aluminium conductor etc complete all as specified and directed .

M&L for 20mm dia GI Tube light grade, with all fittings for earthing lead protection fixed with ground /on wall/pole complete all as specified and directed.

Design, supply, erection, testing and commissioning of outdoor type Change over panel box of overall size not less than 600mm width x 600mm Height (With Canopy & Base Channel) x 400mm Depth, M.S. Channel Base Frame mounted (to be mounted on the 3 side covered brick. pedestal of height 600mm above ground level) , suitable for 3 phase 4 wire, 415 volts AC supply and having on load Changeover switch of size 400 Amp. The panel box shall be duly fabricated in a approved / certified factory / fabrication house who posseses type test certificate from CPRI for similar type of Feeder Pillar and having modern fabrication and testing facility which includes atleast seven (07) tanks pre-treatment facility comprising of de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting (thickness not less than 80 Micron) with approved shade of RAL 7032 (SIEMENS GRAY). The panel box shall be provided with suitable rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The feeder pillar shall be made out of 3.15mm thick CRCA mild steel sheet and 3.00mm thick gland plate and having front and rear opening facility with single layer shutter with locking facility and 2 side slanting canopy type roof on top and mild steel channel (MC-75) base frame at bottom and 2 Nos Earthing Termination bolts, suitable for mounting on the brick pedestal through grouting bolt. Bolts shall be grouted in brick pedstal by using PCC 1:2:4 type B1 (using 20mm graded aggregate) of suitable size of block. The panel board shall be provided with ventilation facility in the form of louvers for better heat dissipation etc complete all as specified and directed.

Design, supply, erection, testing and commissioning of outdoor type Bus Bar Chamber of overall size not less than 1000mm width x 1000mm Height (With Canopy & Base Channel) x 500mm Depth, M.S. Channel Base Frame mounted (to be mounted on the 3 side covered brick. pedestal of height 900mm above ground level) , suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminium bus bars of size 400 Sqmm for cable termination, The Feeder Pillar box shall be duly fabricated in a approved / certified factory / fabrication house who posseses type test certificate from CPRI for similar type of Feeder Pillar and having modern fabrication and testing facility which includes atleast seven (07) tanks pre-treatment facility comprising of de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting (thickness not less than 80 Micron) with approved shade of RAL 7032 (SIEMENS GRAY). The Feeder Pillar box shall be provided with suitable rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The feeder pillar shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate and having front and rear opening facility with single layer shutter with locking facility and 2 side slanting canopy type roof on top and mild steel channel (MC-75) base frame at bottom and 2 Nos Earthing Termination bolts, suitable for mounting on the brick pedestal through grouting bolt. Bolts shall be grouted in PCC 1:2:4 type B1 (using 20mm graded aggregate) of suitable size of block. The panel board shall be provided with ventilation facility in the form of louvers for better heat dissipation etc complete all as specified and directed.

M&L for bore well earthing in repair by DTH (Pneumatic drill machine) machine upto depth 50mtr below ground level of 150mm dia to insert the MS casing pipe of 150mm dia up to 12mtr depth and suitable for inserting the earth electrode 50mm dia GI pipe medium grade duly drilled hole 12mm dia on pipe, 15cm C/C on both side of pipe including lowering in bore well upto depth of 49.5 mtr and 0.5 mtr above ground level and the GI pipe will be braced with FI clamps of size 32x6mm at top including nut bolts. The bore well shall be filled with commercial salt, charcoal, dust and magnesium phosphate of 30cm layer each upto the full length of pipe, the bore well casing pipe shall be 12 mtr of length 150mm dia 5 mm thickness MS pipe for protection of bore well, including welding of GI strip of size 50x6mm on earth electrode of length 0.5 mtr and include up to 7.5 mtr to the test point and GI tubing light grade 50mm bore upto 7.5 mtr from the bore well including test point gun metal or phosphours bronze of size 75x75x25mm drilled screwed including 3 Nos 8mm dia, 25mm long hex head screw and PCC earth pit foundation in PCC 1:2:4 type B1 (using 20mm graded aggregate) surrounding the bore well of size 60x60x30cm and pit cover shall be 40mm thick in PCC 1:2:4 type B1 (using 20mm graded aggregate) reinforced with 6mm dia MS round bars @ 75mm C/C in both direction etc complete all as specified and directed.