Military Engineer Services Tender

M&L for18 to 20 mm thick prepolished mirror finished machine cut kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 20 mm thick cement screed bed or bedding layer in cement mortar 1:4 including rubbing and polishing complete all as specified and as directed.

M&L for 16 to 18 mm thick prepolished mirror finished machine cut kota stone slab flooring as in riser of steps,skirting,dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15 mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for brick work with subclass 'B' brick (old size) straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls or on concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:4 on brick work or concrete surface as in wall, surface finished even and fair complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:6 on brick work or concrete surface as in wall, surface finished even and fair complete all as specified and as directed.

M&L 10mm thick rendering in cement mortar 1:3 on concrete surface as in ceiling, surface finished even and fair complete all as specified and as directed.

M&L applying two coats of exterior emulsion paint of approved shade over one coat of primer including preparation of newly plastered surfaces of wall complete all as specified and as directed.

M&L applying two coats oil bound distemper of approved shade over a coat of alkali resistant primer including preperation of newly plastered surfaces of wall complete all as specified and as directed. .

M&L for applying three coats of white wash including preparation of newly plastered surfaces of ceiling complete all as specified and as directed.

Demolition of reinforced cement concrete as in roofs, beams, staircase, lintels, chajja, RCC over head tank etc complete all as specified and as directed.

M&L Reinforced cement concrete 1:2:4 type B-1 (Nominal mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs,shelves including necessary use and waste of form work complete all as specified and as directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L Mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Dismantling of Brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and finally cleaning the surface with wire brush to remove old treatment for laying PCC padding including removal of unserviceable material outside of MOD land complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-0 using 12.50mm graded stone aggregate mixed with water proofing compound as per manufacturer's instruction as in padding to maintain proper slope as required complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid seperately under respective item.

Supply only water proofing compound complete all as specified and as directed.

M&L cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in roof kerb ,benching in radius 10 cm mixed with waterproofing compound as per manufacturer's instructions complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid seperately under respective item.

M&L cutting out cracks to V section in existing roof or terracing, cleaning out, wetting, grouting with cement and sand slurry in 1:3 complete all as specified and as directed.

M&L application of 5 Layer SHR Waterproofing coating system as per manufacturer instruction on leaking concrete roof surface by thorough surface preparation with high pressure water jet minimum 125 bars, opening the cracks, followed by one absorption coat of nano-tech enhanced elastomeric waterproofing (NEEWP) emulsion having UV resistance and minimum 50% solids filling and sealing the cracks, then over coating with 2 coats of NEEWP + Cement mixture as waterproofing coat having +450% Elongation. The surface is then to be tested for water tightness with a ponding test for minimum 2 days and then top-coated with 2 coats of SHR coating pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) conforming to BIS STD IS 17218:2019 with Pull off adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 Sqm per liter per two coats, DFT 100 - 120 microns using brush, roller, airless spray gun as applicable complete all as specified and as directed. Note:- Water proofing material shall be certified by NABL approved lab and application is to be done by manufacturer's approved applicator only.

Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 25 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

S&F 15 mm bore galvanised steel water tubing 'medium grade' with necessary fittings as required and fixed to walls, ceiling or laid in floors etc complete all as specified and as directed.

S&F 20 mm bore galvanised steel water tubing 'medium grade' with necessary fittings as required and fixed to walls, ceiling or laid in floors etc complete all as specified and as directed.

S&F 25 mm bore galvanised steel water tubing 'medium grade' with necessary fittings as required and fixed to walls, ceiling or laid in floors etc complete all as specified and as directed.

Dismantling of water tanks of any type or pattern exceeding 1000 liter not exceeding 2000 liter and removing from site complete all as specified and as directed.

M&L for 2000 litre capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I 2009 including 20 mm dia ball valve high pressure with polythne float and fly nut minimum weight 210 gram, tank nipple as required complete including dismantling of existing unserviceable water tanks and removing from site complete all as specified and as directed.

M&L 20 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with adhesive joints fixed to walls or laid in floors complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bends complete all as specified and as directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F rolled mild steel work as in Joist, channel, angle, or tee sections fixed independently, with or without connecting plates conforming to Fe-410-W ,Gde-250 quality-A complete all as specified and as directed.

S&F mild steel work as in framed work of water tanks mesh welded and similar work other works conforming Fe 290, Gde E- 165 complete all as specified and as directed.

S&F 4mm dia galvanised steel wire, 150mmx100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and as directed.

M&L for applying two coat of synthetic enamel paint of approved shade over one coat of red oxide primer including preparation of newly steel or iron work of any description, over 10 cm in width or girth not otherwise described complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removing from site complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and not exceeding 4 sqm each and removing from site complete all as specified and as directed.

M&L Second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.

S&F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

2000 Series Windows – Double Rebate Windows/ventilator Providing & fixing of vajra series windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Shutter brackets with a inbuilt pvc lip to be fixed in a way that the lip overlaps the shutter corners and are not exposed . Elixir or equivalent stay, handles 2nos of heavy-duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self-expanding, screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete all as specified and as directed. Make: Elixir Met Form Pvt Ltd. / A2Z Infra Solutions / Tata Pravesh)/ Ashish Industries Gaziabad.

S&F 30 mm thick factory made flush shutters water proof BWR grade solid core construction with block board core and ply wood face panel commercial type both sides complete all as specified and as directed.

S&F 35mm thick 2nd class HW (Hollock) factory made plain, framed, panelled shutter (two panel) with lock rail , kiln seasoned and chemically pressure treated the size of rail and style as per IS 1003 (Part-I) and panel insert of 9mm thick BWP commercial facing plywood or 12mm veneered particle boards with commercial veneering on both faces complete all as specified and as directed.

S&F mild steel flat iron work as in hold fast including screwing or welding complete all as specified and as directed.

M&L cement concrete 1:3:6 type C-0 using 12.5mm aggregate stone aggregate as in filling back side of pressed steel door/window frames and as in holdfast complete all as specified and as directed.

S&F 100 mm size mild steel butt hinges, heavy weight cold rolled mild steel and fixed complete all as specified and as directed.

S&F 150 mm long aluminium anodized barrel tower bolt of extruded section, complete all as specified and as directed.

S&F 150 mm extruded aluminium alloy handle, fabricated type omplete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F in repair 1st class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc complete all as specified and as directed.

S&F in repair 18 mm thick prelaminated particle board exterior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber frame work complete all as specified and as directed.

Hacking out old broken glasses any thickness size, quality or description from metal frames including punching or drilling out old glazing pins / spring clips and providing and fixing new ones. to any height of building complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality in square not exceeding 0.5 sqm in each pane and glazing with oil putty complete all as specified and as directed.

S&F 3 mm thick figured glass, pin head type in square not exceeding 0.5 sqm in each pane and glazing with oil putty complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint of approved shade over one coat of pink primer including preparation of wood or wood based material of any description over 10 cm width or girth not otherwise described complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm complete all as specified and as directed.

S&F 35 mm thick factory made 2nd class hard wood (hollock) glazed/wire gauged/skeleton shutter well kiln seasoned chemically pressure treated.The size of rails and style as specified in SSR Part-I 2009 section 8 Clause 8.24(a) prepared to receive wire gauge (without sash bars) edges of frame chamfered or rounded fitted with cut and mitered beads complete all as specified and as directed. Note :- Wire gauge/glass shall be measured and paid separately under respective item.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills and like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.