Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date29 Oct 2024
Closing Date27 Nov 2024
Tender Amount₹ 4,98,50,000
Costs
EMD
₹ 5,73,500Document Cost
₹ 2,000Tender Fee
Refer Documents
Summary
Addn Altn Cum Special Repair To Offrs Md Accn At Sundarji Enclave
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_681874_1Tender No
CEBZ/MRT/T-25 of 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
M&L brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks
21
-
-
Demolition of cement concrete of ground floor n exc 15 cm thickness(below or above ground level) all as specifed
30.8
-
-
Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises.
6244
-
-
M&L Non skid ceramic coloured tiles 7-8mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cemnt to match including 15 mm th screed ded in cm 1:6 complete all as specified and directed.
896
-
-
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring all as specified
896
-
-
S&F Vitrified Ceramic tiles 8 to10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed.
2800
-
-
S&F Vitrified Ceramic tiles 8 to10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement over 10mm screed bed in CM 1:4 complete all as specified and directed.
588
-
-
S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete, all as specified
1960
-
-
Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortar etc
106
-
-
M&L for 18-20mm thick black granite stone slab machine cut in cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.
336
-
-
M&L for 18-20mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.
14
-
-
M&L machine cut pre polished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete over 20mm thick screed bed in CM 1:6 all as specified
504
-
-
All as per item No 15 above but factory made bull nosed as in riser of steps, skirting/dadolaid over 10mm thick in cm 1:4 complete all as specified.
210
-
-
Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each.
276
-
-
Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each.
448
-
-
S & F for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sides face is covered with decorative face veneer cenmica with lipping/frame to match all as specified and directed
504
-
-
S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
252
-
-
S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed.
532
-
-
S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed.
1624
-
-
S & F Factory made solid wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly → supplied and fitted to chowkats complete all as specified.
336
-
-
S&F powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick black glass and stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.
420
-
-
S&F powder coated anodised aluminium windows fixed type (2 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 4 mm thick black/figured glass stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.
140
-
-
Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets.complete all as specified and directed.
1120
-
-
M&L, 18/19mm thick WPC Solid board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with SS screws to WPC frame work in cup boards, and kitchen cabinet rebated including piano hinges,knobs, handles and latches complete all as specified and directed.
1120
-
-
M&L for stainless steel basket size (15 inch X 20 inch X 4 inch) for modular kitchen cutlery tray/basket with complete sliding Arrangement fixed kitchen cabinet frame complete all as specified and directed. (01 Nos)
56
-
-
M&L for stainless steel basket size (15 inch X 20 inch X 6 inch) for modular kitchen tray/basket with complete sliding Arrangement fixed Kitchen cabinet frame complete all as specified and directed. (01 Nos)
56
-
-
M&L for stainless steel basket size (15 inch X 20 inch X 8 inch) for modular kitchen crockery tray / basket with complete sliding Arrangement fixed kitchen cabinet frame complete all as specified and directed. (01Nos)
56
-
-
M&L for stainless steel basket size (15 inch X 20 inch X 10 inch) for modular kitchen grain troIIy basket with complete sliding arrangement fixed kitchen cabinet frame complete all as specified and directed. (01 Nos)
56
-
-
M&L for stainless steel basket size (15 inch X 20 inch X 4 inch) for modular kitchen tray / basket with complete sliding arrangement fixed kitchen cabinet fram complete all as specified and directed. (01 Nos)
56
-
-
S & F for Stainless steel wide 110 degree Hydraullic hing fixed with ss screw complete all as specified.
294
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for
36.4
-
-
M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified.
3640
-
-
M& L for 125mm long steel handles, cast type, polished bright fixed with ss screw complete all as specified.
168
-
-
M& L for 75mm long steel handles, cast type, polished bright fixed with ss screw complete all as specified.
336
-
-
M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel over one coat of primer all as specified & directed
420
-
-
Supply & fix 150mm size aluminium alloy handles cast type anodized fixed with ss screw complete all as specified.
784
-
-
S&F aluminium anodised tower bolts 150mm long, of extruded section. fixed with ss screw complete all as specified.
392
-
-
S&F aluminium sliding bolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified & directed
56
-
-
S&F Brass 4 lever Mortice lock,vertical type, size 65 mm complete all as specified.
224
-
-
S&F Brass Mortice latch with two levers (vertical type), brass body and fixed size 65 mm complete all as specified.
224
-
-
S&F heavy weight butt hinges 100mm in size complete all as specified and directed.
1176
-
-
S&Faluminium anodised barrel tower bolt with bright bolt 200 mm long.all as specified & directed
392
-
-
M&L for stone slab 30mm thick stone dressed true and square, in one length not less than 60cm and n. exc 120cm in chajjas, sunshades,Plinth Protection etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and directed.
336
-
-
S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete and roller plate fixed with screws to wooden chowkat or welded to steel frame, complete all specified and as directed.
140
-
-
S&F, in repair, aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed.
56
-
-
S&F floor door stopper of overall length 150mm of cover plate aluminium alloy body and tongue,anodised with hard drawn steel spring fixed in floor size complete all as specified and directed
336
-
-
S&F in repairs 25mm dia stainless steel decorated curtain rod with bracket and ring complete all as specified and directed
1120
-
-
Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc.
17360
-
-
M & L 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.
10220
-
-
M&L Rendering 5 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified.
1400
-
-
M & L for applying 15 mm thick rendering using ready mix plaster bags in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @200ml by weight of 50kg cement bag or as per manufacturer instructions, complete all as specified and directed Note:- Water proofing compound shall be measured and paid sepratly
5740
-
-
Preparation of old surface after complete removal of existing treatment by mechanical complete all as specified and directed
4200
-
-
M&L for applying 2mm thick wall care putty making smooth surface complete all as specified and directed.
21560
-
-
M&L for 1 coat of prime using roller complete all as specified and directed.
14420
-
-
M&L for Two coat of OBD using roller for painting complete all as specified and directed
14420
-
-
Material & Labour for applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting .
7140
-
-
M& L preparing plastered un plastered old surfaces on ceiling and applying two coats of white wash on ceiling surface
1400
-
-
Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition)
11.2
-
-
M&L Form work to sides and soffits of beams lintels etc finished rough
56
-
-
M & L precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4.including all neccesary formwork & finishing exposed concrete surface all as specified and directed
7
-
-
S&F mild steel TMT bars No 500D 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.
1204
-
-
ditto as per SI item no 64 but 6 to 8 mm dia complete all as specified and directed.
280
-
-
Taking up or down steel tubing and connection 15 mm bore pipe and removing from site.
1176
-
-
All as per Sl Item No.66 here-in-before but 20 mm bore pipe.
672
-
-
Supplying and laying of CPVC 25 mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors incl cutting chases where required finished well complete all as specified
672
-
-
Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors incl cutting chases where required finished well complete all as specified
1176
-
-
Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete.
56
-
-
S&F triple layer white 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and incl dismantling water tanks any type & removing complete all as specified.
56
-
-
S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete.
56
-
-
S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20mm dia
56
-
-
S&F in repair cromium plated 15 mm bore size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified
168
-
-
S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with fancy type screwed both ends for iron or for union.
364
-
-
S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.
28
-
-
S&F in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified.
84
-
-
S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed.
84
-
-
S&F, in repair, vitreous china wash down water closet pan (Pedestal pattern), white with 'p' or 's' trap (including flushing cistern and flush pipe single piece), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed.
84
-
-
S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
84
-
-
S & F in repair Toilet paper holder of brass chromium plated conforming to the samples kept in the office of Engineer-in-Charge.
84
-
-
S&F 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair.
84
-
-
S&F 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F-1017401, Pearl Cat Part No ARI-015, Hindware Cat Part No- F-74 0022
84
-
-
S&F 15mm dia chromium plated fancy type sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F 2004501, Pearl Cat Part No ARI-011, Hindware Cat Part No- F 330023
28
-
-
S&f Iin repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long
84
-
-
S&F fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.
84
-
-
S&F (in repair)chromium plated towel rail 20mm dia D type 600 mm long as a approved quality.complete all as specified and directed.
84
-
-
S&F (in repair)chromium plated towel rack 600 mm long as a approved quality.complete all as specified and directed.
84
-
-
Supply and fixing PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 32mm bore suitable for wash hand basins/sinks complete all as specified & directed
84
-
-
S&F in repair 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed.
84
-
-
S&F PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement.
140
-
-
S&F PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement.
35
-
-
Supply & fix PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.
364
-
-
S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing with Granite Stone and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm
28
-
-
S&F stainless steel plate rack of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one all as specified and directed
28
-
-
S&F in repair Brass chromium plated shower rose 125mm size all as specified and directed
84
-
-
S&F in repair PVC Bath cabinet with mirror 18"x22"x4.25". Make: commander or equivalent complete all as specified and directed.
84
-
-
S&F in repair CP brass soap dish complete all as specified
84
-
-
S &F Grating doom 100mm dia of PTMT (Minimum weight 25gms)
140
-
-
Supply and fix in repars 75mm bore ( Pipes single socketed in any length with rubber ring joints, laying floor complete all as specified & directed.
280
-
-
Supply and fix in repairs 75mm bore ( Pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified & directed.
70
-
-
Supply and fix in repais 110mm bore PVC Pipes single socketed in any length with rubber ring joints,laying as in floor and wall etc. complete all as specified & directed.
336
-
-
Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed.
112
-
-
Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed.
112
-
-
S&F 110mm PVC (SWR) vent cowl all as specified
28
-
-
S&F 110 PVC (SWR) junction single, (Single T) equal or unequal all as specified
28
-
-
S^F 110mm PVC (SWR) 'S' trap all as specified
84
-
-
S & F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof.
126
-
-
Treatment the soil under plinth protection at the rate of 5 litres of emultion per square meter of surfaces area.
336
-
-
M&L for dubbing out average 20mm thick on irregular faces of walls and ceilings CM 1:4 all as specified
280
-
-
Material & labour for sunken slab treatment comprising of the following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance n.exc. 250mm compete all as specified and directed.(b) Material & labour for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Material & labour for applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Material & labour for applying bitumin grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) Material & labour for 25mm thick plastering in CM 1:4 using water proofing compound (WPC) @ 3% by weight of cement. on wall of sunken floor (f) Material & labour for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g) Supply & fix of 32mm dia GI pipe medium grade, 450m long 9(for draining out the water) all as directed by engineer-in-Charge
147
-
-
M & L for cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finihes with and incl material and labore in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 /Bk work in CM 1:4 as required at site and as directed by Engr-in-Charge
175
-
-
Taking down old existing water proofing treatment from the top of RCC/Arch slab, incl taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish complete all as specified and directed.
1925
-
-
Material & Labour for 50mm thick average thickness of PCC 1:2:4 type B-O(using 12.5 mm graded stone aggregates) all as specified and directed.
1125
-
-
Material and Labour for 10mm thick cement paster in CM 1:4 mixed with WPC @200ml by weight of 50kg cement bag finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate).
1925
-
-
Supply only liquid water proofing compound
210.7
-
-
Material & labour for surface Preparation: The surface to receive the treatment shall be thoroughly free of laitance, scales, oil or any other loose material. It should be made free of any sharp objects. Cleaning of PCC shall be done with wire brushing to attain smooth levelled surface. Cracks shall be rectified, filled using dual shrinkage compensated Repair Mortar and dried for 72 hours before laying the liquid applied membrane. Grout: Providing Chemical injection treatment in the form of pressure grouting to the construction joint and cracked portion at 1m c/c by injecting cement slurry mixed with dual shrinkage compensated cementitious grout Injection grout additive, in the required consistency through the pre fixed PVC nozzles in the 18 mm dia holes, fixing of PVC nozzles with instant setting cement. Angle fillets/Coving: Providing and making of fillet, 50mm x 50mm on sharp corner of terrace with cement sand polymer mortar (add “multipurpose mortar”, 10% by weightofcement). First apply the bonding coat of Multi-Purpose Polymer 5-10% diluted in water and add to cement slurry. Apply the bonding slurry and apply the polymer mortar over the sharp edges.
Note: Grouting will be done when and where ever required.
1925
-
-
M & L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account)
36
-
-
M&L for pcc 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work
3.5
-
-
Demolition of cement concrete of ground floor n exc 15 cm in depth in any position nototherwise specifically provided for.
70
-
-
M&L for chequered cement concrete colour tiles glossy finish size300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified.
980
-
-
M & L for repairing existing RCC structure work by gunting to damaged edge bottom of beam , chajja, slab 40 to 60mm thick and part of RCC member in CM 1:3 & depositing material/ mortar with spray gun under a pressure of 20 to 30 N/CM2 including skefolding and welding wire mess 2 mm dia and size of wiremesh 50mm X 50 mm including cutting welding and placeing position as directed by Engr in-charge.
840
-
-
Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions
420
-
-
S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.
2895
-
-
Sewage Disposal
-
-
-
M&L for 15mm thick rendering on Brick masonary wall surfaces in CM 1:4 mixed with water proofing compound finised even and smooth with using extra cement all as directed by Engr-in-charge
140
-
-
Supply only integral water proofing compound.
4.2
-
-
M&L in repair 150mmUltra P EDWC (Double wall corrugated) pipe and all necessary fittings and fixtures complete all as specified and directed.
35
-
-
M & L PCC ( 1 : 4 : 8 ) Type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete.
3.5
-
-
M & L concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 150 mm dia pipe work in foul position.
30.8
-
-
Demolition of PCC of any description and in any position not otherwise specifically provided for drain etc including removing the same where directed complete all as directed by Engineer-in-Charge.
2.1
-
-
M & L for precast RCC 1:2:4 type B-1(using 20mm graded stone aggregate)for manhole cover including placing and set in CM 1:6 all as specified
4.2
-
-
M&L for pcc 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work
1.6
-
-
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including finishing the top of benching even and smooth using extra cement (forming channel shall be measured and paid for separately).
32
-
-
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm pipe
14
-
-
M& L preparing plastered new surfaces of wall and applying three coats of white wash on wall surface
140
-
-
Fencing and Gate
-
-
-
Excavating in post holes soft/loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,
310
-
-
S&F Mild Steel angle iron posts and struts in fencing including cutting tops to shapes as directed including driling holes for bolting of MS flat iron in horizontal, vertical & diagonal faces of each panel to be intertwined with Chain link fencing, and fixed to posts with MS nut, bolts and washers including all necessary drilling bolting etc, and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.
4500
-
-
M & L for cement concrete 1:2:4 type B2 (40mm graded aggregate) in foundations, filling and mass concrete
35
-
-
Supply only Chain link mild steel galvanized fencing (IS-272) 100x100 mm mesh GI wire (Minimum dia 4mm and weight of mesh n.exc 4.0 kg/sqm) made up into mattress or cages etc complete all as specified and directed.
3200
-
-
Fixing only chain link fencing including line bars, any mesh, size and type to any type of standard, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.
1600
-
-
S&F mild steel bolts. purpose made.with hexagonal orsquare head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut. exc 10 cm but not exc 15 cm and 12mm dia complete all as specified and directed.
150
-
-
Supply only Mild steel bars 10mm dia round bar complete all as specified and directed.
1800
-
-
M&L for preparation of new or previously untreated steel surfaces of any description exceeding 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
153
-
-
External Water Supply
-
-
-
Excavation in trenches in soft/lose soil n.exc. 1.5M wide & n exc 1.5M deep for laying of GI/CI pipe line & getting out including forming bottom surface all as specified and directed.
100
-
-
Returning, filling in, trenches including spreading, levelling, watering and well ramming in layer n.exc. 250 mm in any type of soil after the pipe laid & tested complete all as specified and directed.
90
-
-
Removing excavated surplus soil to a distance n.exc. 50mtr and depositing where directed at a level n.exc. 1.5 m above the starting point all as specified and directed
10
-
-
M&L for Disconnecting and taking up old existing GI/CI water tubing and connection / grade and in any posisition of trenches / under floors/ on walls etc including connected fitting/ accessories and fixtures such as bend, Tee, Union,Valve etc, all as directed and specified for the following sizes :-
-
-
-
(a) 40/50mm dia
140
-
-
(b) 25mm dia
650
-
-
(c) 20mm dia
150
-
-
(d) 100mm dia
150
-
-
Supply & Fixing 50mm dia GI tubing, medium grade, ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc complete all as specified & directed by Engr-in-Charge
140
-
-
Supply & Fixing 25 mm dia GI tubing, medium grade, ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc complete all as specified & directed by Engr-in-Charge
650
-
-
Supply & Fixing 20 mm dia GI tubing, medium grade, ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc complete all as specified & directed by Engr-in-Charge
150
-
-
Supply, laying and jointing pipe Ductile iron, S/S end class K-9, 100 mm (4”) dia suitable for tyton joint complete all as specified and directed.
150
-
-
M & L DI/CI Specials class B as per IS such as bends, tappers,any type branches cross all sockets and spigot collar caps, Tee, flanged and plug etc. up to 150mm bore all as specified and as directed
150
-
-
Supply and fixing Gun metal, gate valves, with iron wheel head, screwed both ends for GI pipe of size 50mm dia complete all as
11
-
-
S & F of galvanized fitting like TEE, Elbow, Socket, Union, Reducer, Nipple of suitable for existing GI tubing complete all as specified and directed.
150
-
-
M&L for construction of brick masonary valve pit of size 600x600x600mm incl necessary excavation and earth work and disposal of surplus soil upto 50m, BB work in CM 1:6, 10mm plastering internally in cement mortor 1.4, PCC 1:2:4 100mm thickat bottom and top wall as copling of valve pit, MSsheet 3mm thick cover doublr door fixed in angle iron frame 35mmX35mmX5mm and 40mmX40mmX5mm at bottom for accomadating cover duly embaded in PCC coping with 25X3mm FI lugs 300mm long, one on each side, 12mm dia MS handle made to shape, locking arrangement with 1 No.Lock with two keys NAVTAL/Godrej/Harrison 50mm incl two coats of Synthetic enamel paint over a coat of red oxide zinc chrome primer on steel surface complete all as specified and shown on drawing.
11
-
-
Item of E/M
-
-
-
Taking out existing unsv UG cable / Over head line any type and Supply, laying, jointing, testing and commissioning LT underground cables, 1100 volts grade, XLPE insulated and PVC sheathed, heavy duty armoured, with multistranded aluminium conductors, IS-7098 (marked, laid in trenches / ducts / fixed on poles / walls / laid under roads / paths / drain / culverts or encased in GI pipe complete incl removing the Eixsting unsv cable any size all as specified and directed. Cables of the following sizes:-(Note;- Rate quotted includes terminal Lugs / road cutting/ wall cutting/ floor cutting /interlocking / stone and making good damged portion matching with existing surface with all existing finishes.)
-
-
-
(a) 240 Sqmm 4 core
650
-
-
(b) 70 Sqmm 4 core
550
-
-
(c) 16 x 4 Sqmm 4 core
850
-
-
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in Soft/Loose soil including trimming sides and bottom of trenches complete all as specified in the following type of soils:
418.2
-
-
Returning, filling-in, including spreading, watering and well ramming in layers not exceeding 25 cm thick each, in soft /loose soil complete all as specified in the following type of soils
268.1
-
-
Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.
150.15
-
-
Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables complete all as specified.
125.46
-
-
M & L Bricks for protection cover to under ground cable (with standard size fly ash bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10mm as directed.
13.94
-
-
M&L for auguring of hole suitable for passing 40mm to 100mm bore pipe in true horizontal position under road, PCC paths etc., by means of mechanical ring/ auger after doing ultrasound to prevent any damage to existing cables pipe line specified and directed coming in the route not exceeding 1.5 m in depth below existing surface level of road and not excd 30M in length complete all as specified. Note: Pipe shall be measured and paid separately under appropriate items and any dahage to existing cables of anytype shall be made good by the Bidder without any extra cost to department.
20
-
-
Taking out unsv LT panel and Supply, installing, testing and commissioning, factory made and tested . LT feeder pillar box (KIOSK), outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated aluminum bus bars 600 Amps rating installed on porcelain insulators. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15mm CRCA MS sheet and 40x40x4mm thick angle iron frame work, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front opening type, with aprons for cable entry, with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) stranded lock with 2 keys, internal wiring with PVC insulated, stranded copper conductor, FRLS cables, IS-694 marked of adequate size but not less than 10 Sqmm. The platform shall be such that it is of a height 45 cm above the nearest road level. complete all as specified and directedincluding connections of all out going/in coming existing cables of size 25/35/50/95/120/ 150/240/300 sqmm by drawing /digging out cable from loops in trenches out side the Bldg inclusive of necessary excavation and earth work as required and relaying the cables with retrieved bricks and providing new sand cushioning and crimping suitable size copper lugs for terminal connections of cables, necessary brick foundation with plastering to the Panel board, All out going feeders shall be connected by cable through suitable size gland plate / glands.& The various feeders shall be indicated by 50 mm size letters in synthetic enamel white paint complete all as specified and as directed Engr-in-Charge , The scope of work includes the following:-
1
-
-
(I) Incoming (i) MCCB 4 Pole, Microprocessor Based 400A, Breaking capacity 25 KA, 415 V, 50 Hz with OL, SC, protection, -01 Nos along with Spreader terminals (Make : Siemens: / L&T & Equivalent Schneider )(b) Digital voltmeter 0-500 volts with selector switch - 01 No (Make: Siemens/Schneider/legrand /AE/SELEC) - 01 Nos With selector switch (c) Digital Amp meter 0-250 Amp with selector switch & CT - 01 No (Make: Siemens/Schneider/legrand /AE/SELEC) - 01 Nos With selector switch d) Indicator lamp LED type (R, Y, B) complete with fuse -01 Set (Make: Siemens/Schneider/legrand /AE/SELEC) - 01 Nos With selector switch e) CT Ratio 400 amp /5 (II) Outgoing :- (i) MCCB 4 Pole, Thermal Magnetic Based 315A, Breaking capacity 16 KA, 415 V, 50 Hz with OL, SC, protection, -01Nos along with Spreader terminals (ii) MCCB 4 Pole, Thermal Magnetic Based 250A, Breaking capacity 25 KA, 415 V, 50 Hz with OL, SC, protection, -01 Nos along with Spreader terminals iii) MCB TPN 62 Amp C-Curve - 1No (Make-Schneider / Legrand L&T )
-
-
-
All as per Srl item No 178 Complete but Busbar 450 Amps rating.(I) Incoming (i) MCCB 4 Pole, Microprocessor Based 250A, Breaking capacity 25 KA, 415 V, 50 Hz with OL, SC, protection, -01 Nos along with Spreader terminals (Make : Siemens: / L&T & Equivalent Schneider )(b) Digital voltmeter 0-500 volts with selector switch - 01 No (Make: Siemens/Schneider/legrand /AE/SELEC) - 01 Nos With selector switch (c) Digital Amp meter 0-300 Amp with selector switch & CT - 01 No (Make: Siemens/Schneider/legrand /AE/SELEC) - 01 Nos With selector switch d) Indicator lamp LED type (R, Y, B) complete with fuse -01 Set (Make: Siemens/Schneider/legrand /AE/SELEC) - 01 Nos With selector switch e) CT Ratio 250 amp /5 (II) Outgoing :- (i) MCCB 4 Pole, Thermal Magnetic Based 160A, Breaking capacity 16 KA, 415 V, 50 Hz with OL, SC, protection, -03 Nos along with Spreader terminals (ii) MCCB 4 Pole, Thermal Magnetic Based 250A, Breaking capacity 25 KA, 415 V, 50 Hz with OL, SC, protection, -01 Nos along with Spreader terminals iii) MCB TPN 63 Amp C-Curve - 4No (Make-Schneider / Legrand L&T )
3
-
-
Supply, installing, testing and commissioning of LT out door type factory made(CPRI Approved ), junction box of size 750mmX600mmX500mm (over all dimension )with mild steel angle iron of size 50X50X6mm vertical frame and legs with mild steel Angel iron 50x50X6 mm in horizontal sides of the frame LT Junction box (KIOSK), outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system,The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15mm CRCA MS sheet and 50x50x6 mm thick angle iron frame work, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front & back opening type, with aprons for cable entry, and fixing danger notice plate made of 1.6mm thick mild steel sheet, vitreous enameled white, of size 20 x 15cm with letter, figures and conventional skull bones in signal red colour and fixed front & back door pillar box , including Ammeter, volt meter , 3 phase indication lamb etc with voltage and danger indiated in Hindi and English complete all as specified and directed.with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) stranded lock-2Nos with 3 keys. Aluminium bus bar (LxWxH)400 x 10x50 mm with drilled holes for incoming /out going cable core connection including aluminium lugs ,GI bolts ,Nuts and washers of suitable size . Porcelain / synthetic bridge insulators, heavy duty with necessary steel / GI screws ,bolts, nuts and washers -08 Nos , complete all as specified and as directed. , The platform shall be such that it is of a height 45 cm above the nearest road level. complete all as specified and directedincluding connections of all out going/in coming existing cables of size 25/35/50/95/120/ 150 sqmm by drawing /digging out cable from loops in trenches out side the Bldg inclusive of necessary excavation and earth work as required and relaying the cables with retrieved bricks and providing new sand cushioning and crimping suitable size copper lugs for terminal connections of cables, necessary brick foundation with plastering to the Panel board and taking out of old skelton type panel with control switches complete all as specified and as directed Engr-in-Charge (NOTE:-1 Panel should be 61439 Panel Builder should Submit All Certificate Before Executing the job.)
1
-
-
M&L for plate earthing for sub station equipments complete with galvanised mild steel plate electrode 60 cm x 60 cm x 6.3 mm thick buried directly in ground vertically (in earth pit not less than 3.5 m below normal ground level) with the top edge of the earth plate at a depth not less than 2.75 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth strip 32 x 6 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth plate at one end and connected to metallic bodies of HT/LT equipments etc at the other, earth strip encased in and including 40mm bore GI light grade pipe with all fittings from top of electrode to body of equipment fixed with and including 25 x 3mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-O using 12 mm graded crushed stone aggregate excavation & earth work and RCC cover complete all specified and shown in electrical plate No 5 of SSR Pt-I.
10
-
-
S&F pole mounting type junction box factory made of minimum size 300x150x100mm of FRP sheet duly powder coated with front openable hinged door , locking arrangements, with 4 Nos aluminium bus bars 40 Amps rating mounted on porcelain insulator, cable glands and lugs consisting DIN type rails for fixing MCB DP 6/10 Amps, 10 kA suitable for domestic loading , -01 no. including mild steel flat iron clamp made out of 40x4mm FI, nuts, bolts and washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed Engr in Charge.
17
-
-
Supply & fixing Un plasticised PVC pipes of prssure rating 10Kgf/cmSq 15 mm bore and 3mm thick complete fixed on pole using suitable clamps nuts & bolts (not less than 03 Nos) complete all as specified and as directed
120
-
-
S&F for one runs of three core 2.5 Sqmm x 3 core (nominal area) PVC insulated and PVC sheathed multi stranded unarmed copper conductor cable LT 1100 volt grade Confirming to IS : 7098 drawn through GI pipe for connecting to street light and pole JBs and one run of PVC insulated and all complete as specified and as directed.
143
-
-
Supply and laying galvanised steel water tubing, light grade, IS-1239 marked with all fittings (IS marked) and laid in trenches / under roads / in drains / fixed to poles/walls ( with required size flat iron clamp bolts, nuts and washers ) pipes of the following sizes :-
-
-
-
(a) 40 mm bore
40
-
-
(a) 50 mm bore
50
-
-
(b) 80 mm bore
30
-
-
(c) 100 mm bore
10
-
-
S&F service main distribution (SMC JUNCTION BOX ) box minimum inside size 395 x 235 x 150 mm with Bus bar 200 amps 4 pole for distribution of multiple nos of service connection, (ISI marked )weather and moisture-proof, nuts and bolted bus bar system, 200 Amps capacity and fixing on pole/wall with suitable FI clamp nuts and bolt complete all as specified and directed. (Make : Mahendra/ Sintex /Shalab (I) ltd and equivalent )
2
-
-
M&L for preparation of old painted surfaces steel tubular swaged poles / Rails/Girder poles of LT over head line ( Except embedded portion) , 11/ 9 M long including all MS work mounted on pole , earth protection & water pipe ( if exists) including bracket(s), single or double of size 1.5m x 40/50 mm pipe ) and providing one coat of aluminium paint and providing 05 Nos bands/ straps with Two coats of retro refelective paint ( Black, Red , white, Green and Black and 25 cm wide each) from top of plinth block and numbering of poles with white refelective paint (50mm wide and 100mm high letters) including encircling the letters or figures complete all as specified and directed Engr in Charge
17
-
-
Internal electrification
-
-
-
Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.
2056
-
-
Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed by Engineer - in - Charge.
1810
-
-
Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of not less than 20mm dia complete with all accessories/fittings, brass screws, washer etc, including modular metal flush boxes, modular plates inner and outer suitable for fixing modular switches/sockets/regulator and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, sheathed and connected to common earth and earth duly complete all as specified and directed for the followings :-
-
-
-
One tube light/Bulb/ Bldg security light point controlled by one, one way switch 05 / 06 Amps.
1272
-
-
One fan point / Exhaust fan point controlled by one, one way switch 05 / 06 Amps.
224
-
-
One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.
168
-
-
One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.
140
-
-
One Bell point controlled by one, one way switch 05 / 06 Amps.
56
-
-
All as per Srl item No 195 above here-in-before but using 2.5 sqmm copper conductor and with 2.5 sqmm earth wire for one 15 amps socket outlet on independent board all as directed.
140
-
-
-ditto- but with 4 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet/AC point on independent board.
56
-
-
S&F Modular Switch, 1 module, 6A, AC, 240V, one way ISI Marked and as specified.
1804
-
-
S&F Modular Socket, 2 module, 6A, 2/3 pin combined, AC, 240V, ISI Marked and as specified.
308
-
-
S&F Modular Socket, 2 module, 6A / 16A, 2/3 pin combined, AC, 240V, ISI Marked and as specified.
224
-
-
S&F Modular Switch, 1 module, 16A, AC, 240V, one way ISI Marked and as specified.
224
-
-
S&F Modular Bell Push , 1 module, 6A, AC, 240V, ISI Marked and as specified.
56
-
-
S&F Modular 4 step fan regulator 1/2 module, 100w, AC, 240V, ISI Marked and as specified.
140
-
-
Supply and fixing Bell,AC , 230 volts ,Single pole
56
-
-
Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate all as specified and directed.
384
-
-
Supply and fixing LED lamp 9/10 watt.
384
-
-
S & F 20 W surface / wall mounted, 4 feet LED tube light having luminous efficacy of ≥100 lumen/W, CRI 80, PF 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD 20%, surge voltage protection polycarbonate diffuser and housing with end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineer-in-charge.
560
-
-
Supply and fix wall light fixture made up of polycarbonate including 8 to 10 watt LED lamp.
112
-
-
Supply and fixing decorative LED tube light fitting 10 watt wall mounted with extruded polycarbonate ,integrated lamp & driver with opal diffuser and decorative end plates complete with all accessories and fixing material complete all as specified and directed.
196
-
-
Supply and fixing 35W LED building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including all material required for fitting all as specified and directed by Engr-in-Charge.
20
-
-
Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.
972
-
-
Material and labour for sub main wiring with 10 Sqmm FRLS nominal cross sectional area, four single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 10 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 32 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing SURFACE complete all as specified & directed.
170
-
-
Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing surface complete all as specified & directed.
520
-
-
Material and labour for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 04 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing surface complete all as specified & directed.
1120
-
-
Supply and fixing sheet metal enclosure double door, three pole and neutral, AC, 415 volts, 4 way, with 200Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces incl taking down old u/s DB's complete all as directed by Engineer - in -charge.
28
-
-
Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32Amps, 10kA and making connections complete all as specified & directed.
364
-
-
Supply & fixing Isolator, four pole, AC, 240 volts, B series capacity 63 Amps and making connections complete all as specified & directed.
28
-
-
Supply and fixing MCCB 4 pole 125 Amps 16 kA ,thermal magnetic based protection release,Adjustable thermal protection Ir (against overloads),Ics=100% Icu all as specified and as directed.
7
-
-
Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 08 protection, with provision of 16 KA 125 Amp G frame MCCB. Make- Legrand/Schneider/ABB with the inbuilt provison for fixing of 1 No MCCB and 12 Nos MCB'S inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as directed by Engineer - in - Charge.
7
-
-
Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.
14
-
-
S/F Modular Power Switch and Socket Unit with factory made poly carbonate modular box, 20A, 3Pin, AC, 240V incl 20A MCB SP and Plug Top ISI Marked all as directed.
56
-
-
supply and fixing Steel Exhaust fan with louver/bird guard and fixing accessories 230 Volt and 300mm sweep.
28
-
-
supply and fixing Exhaust fan with louver PVC and fixing accessories 230 Volt and 250 mm sweep.
56
-
-
M&L for making opening in the wall for fixing exhaust fan up to 250mm / 300mm,including plastering work & making good the surfaces all as directed.
84
-
-
S&F BLDC ceiling fan 1200mm sweep 220CMM air delivery,BEE 5 star energy rated minimum service value≥6,copper winded motor ,anti rust powder coated aluminium blade,double ball bearing, dynamically balanced including canopy,down rod,shackel assembly,safety pin,nut bolt etc electrical connection with flexible Cu conductor cable of appropriate size from ceiling rose/junction box to the fixture complete incl writing MES No. all as specified and directed by the engineer-in-charge.
140
-
-
Supply and fix electric water heater, storage type SS/glassline inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipes,hanging assembly etc connecting with 3 core flexible Cu conductor cable of appropriate size from power point to the geyser including plug top,writing MES No. ,complete all as specified and directed by the engineer-in-charge.
56
-
-
Taking down existing Exhaust fan 250 / 300 mm of any size any type, and keep them safe to deposited to E/M yard complete all as directed.
84
-
-
Taking down existing ceiling fan of any size, CeiIing cable end,dismentalling blades ,make one set of three blades and keep them safe to deposited to E/M yard complete all as directed.
140
-
-
Taking down existing water heater of any size,capacity disconnecting connection and keep them safe to deposited to E/M yard complete all as directed.
56
-
-
Supply & Fix single phase electrically oprated wall mounted kitchen chimney, suction capacity 1500 qubic meter/ Hr, size with less than 60 CM, Noise below 60 db, chimney made of MS with indoor, powder heat resistant pain (black gloss), fitted with 1.5W light, having autoclen feature and oil collector, suction area of chimney make up of SS, Nubers of speed of fan 03, including flexible duct pipe for exhaust and terminal of suitable size all as specified and directed by Enger-in-Charge
28
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%