Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date9 Dec 2024
Closing Date6 Jan 2025
Tender Amount₹ 1,20,00,000
Costs
EMD
₹ 2,40,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_687845_1Bid Award Id
ViewTender No
CWE/LKO/E/T-108 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
All as per serial item No 02 here-in-before but one, two way light point controlled by two, two way switches, 06 Amp.
20
-
-
... More
All as per serial item No 02 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.
140
-
-
... More
All as per serial item No 02 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.
160
-
-
... More
All as per Serial Item No 02 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed.
200
-
-
... More
Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of modular type (Flush box paid under seprate items) etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.
100
-
-
... More
Taking down OLD U/S Switch/socket/Ceiling rose/calling bell/bell push/lamp holder/Regulator any type and size complete all as specified and directed.
4823
-
-
... More
S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed
800
-
-
... More
S&F Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed
200
-
-
... More
S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed
400
-
-
... More
S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed
200
-
-
... More
S&F White cover plate with frame,12 module complete all as specified and as directed
20
-
-
... More
S&F Modular White cover plate with frame,8 module complete all as specified and as directed
30
-
-
... More
S&F Modular White cover plate with frame,6 module complete all as specified and as directed
20
-
-
... More
S&F Modular White cover plate with frame,4 module complete all as specified and as directed
20
-
-
... More
S&F Modular White cover plate with frame,3 module complete all as specified and as directed
30
-
-
... More
S&F Modular White cover plate with frame,2 module complete all as specified and as directed
10
-
-
... More
S&F Modular Metal flush box 12 module complete all as specified and as directed
20
-
-
... More
S&F Modular Metal flush box 8 module complete all as specified and as directed
20
-
-
... More
S&F Modular Metal flush box 6 module complete all as specified and as directed
20
-
-
... More
S&F Modular Metal flush box 4 module complete all as specified and as directed
40
-
-
... More
S&F Modular Metal flush box 3 module complete all as specified and as directed
40
-
-
... More
S&F Modular Metal flush box 2 module complete all as specified and as directed
40
-
-
... More
S&F Calling bell , AC, 230 Volts, single phase complete all as specified and as directed
100
-
-
... More
S&F bell push , AC, 230 Volts, 2 module complete all as specified and as directed
50
-
-
... More
Supply and fixing fan step regulator, 120W 2 module Modular type complete all as specified and as directed
100
-
-
... More
Supply and fix in replacement rectangle wall light LED integrated fittings MS wit polycarbonate diffuser Chrome colour dimension size 300x65x130 mm, 1000 lmn ,10 watt wall mounted higher energy saving decorative ultra enviromental friendly, energy efficient complete all as specified and directed.
400
-
-
... More
Supply and fixing in replacement 1X9 Watt square shaped integral decorative LED (warm white)Bollard polycarbonate diffuser and IP 65 protection and mounting of fitting with PCC foundation min height 150x150x300 mm and size all as directed
10
-
-
... More
Supply and fixing in replacement motion sensor based integrated LED tube light LED tube light fittings 1200 mm, 20 W higher energy saving decorative ultra slim square profile LED lighting fixture enviromental friendly, energy efficientall as directed
500
-
-
... More
Supply & fix in replacement LED Ceiling /surface mounted down lighter, 2'X2' , 36W suitable for 2700k to 6500 k including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified.
200
-
-
... More
Supply and fix in replacement LED 40/36 watt light pureline slim suspended 50mm suspended (hanging type) aluminium extruded linear lighting luminaries with superior white powder coated finish, multiply option options of lights distrubution run length and luman packages for diffrent application to choose white colour higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminium housing enviromental friendly, energy efficient complete all as specified and directed.
150
-
-
... More
Supply & fix in replacement LED Ceiling /surface mounted down lighter, 2'X2' , 36W motion sensor based including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified.
40
-
-
... More
Supply & Fix in replacementLED bulb chargable type having backup time of 3 to 4 hours 18 Watts suitable for B22 white in colour all as specified and directed.
500
-
-
... More
S&F of LED flood light 100 Watts with aluminium die cast IP 66 with symmetric light distribution energy saving, environmental friendly suitable for high lighting archtechural faced all as specified and directed.
30
-
-
... More
S&F of LED flood light 60 Watts with aluminium die cast IP 66 with symmetric light distribution energy saving, environmental friendly suitable for high lighting archtechural faced all as specified and directed.
30
-
-
... More
Supply and fix Post top lantren with fully cast aluminium finish polurethane paint with LED 20 wattage ( with prior tretments) post top lantren with polyurethane ( with prior treatments ) Paint with arylic window cover total length 533 mm and breadth 228 mm.B-22 brass provided with qaluminium cover incl GI pie medium grade suitable size of post top lantren incl 20 watt LED bulb & PCC 1:2:3 (size 600 x 600 x 600 mm ) foundation, , nut bolts, connecting up complete all as specified and directed.
12
-
-
... More
S & F in replacement Flexible conduit of size 25 mm complete all as specified and directed.
180
-
-
... More
S & F in replacement Aluminium cable 2 core sevice cable 6sqmm armoured cable complete all as specified and directed.
1200
-
-
... More
S & F in replacement Aluminium cable 2 core service cable 10sqmm armoured cable complete all as specified and directed.
1200
-
-
... More
M & L for replacement TPN MCB 100 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity complete complete all as specified .
10
-
-
... More
M&L in replacement of MCB Single Pole & Neutral MCB 40 to 63 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity complete complete all as specified .
40
-
-
... More
M&L in replacement of MCB Single Pole & Neutral MCB 63 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity complete complete all as specified .
50
-
-
... More
Supply and fixing in replacement of MCCB current rating 100 Amps with thermal magnetic release, 4 pole, 415 volts AC 16 KA ruputuring capacity all as specified and directed.
30
-
-
... More
Supply and fixing in replacement of MCCB current rating 125 Amps with thermal magnetic release, 3 pole, 415 volts AC 25 KA ruputuring capacity all as specified and directed.
10
-
-
... More
Supply and fixing in replacement of MCCB current rating 125 Amps with thermal magnetic release, 4 pole, 415 volts AC 36 KA ruputuring capacity all as specified and directed.
10
-
-
... More
Taking down old U/S Bldg security/street lights/Gate lights/Bollard light/flood lights of any type any size retreived from existing site complete all as specified & directed.
862
-
-
... More
Supply and fix LED Solar integral AIO post top luminaire with solid polycarbonate housing, reliable & robust construction with IP 65 protection, suitable for pole entry dia of 60mm, having 3000 suytem luman, suitable for 12 hrs ( Dim mode) Autonomy lighting mode slectable for 2Hrs/4Hrs/ 6 Hrs along with the CCT 3000K/4000K / 6500 K/ by remote. Lithium Pherrouphosphate battery capacity min 13 Wp, CRI . = 70, system efficiency 165 lm/W & system wattage should be more then 18w +- 2%, if wattages increases then the size of battery & panel shall also be inceresed in similar percentage to maintain equal autonomy of the system microwave motion sensor 5.8 Ghz , =25 mW life class of LED system 25000 hrs @ 70, chager efficiecny 90% , The PV module should be bemade up of crystalline silicon solar cells "Mono - Crystalline and must have a certificate of testing incl 60mm dia medium grade GI pipe min 45 mm with cutting drilling and making good with PCC ration complete all specifiefd and as directed.
40
-
-
... More
Supply and fixing Lithium based energy efficient integrated all in one of min 18 watt plus/ min 2% ( Min 3000 lmn) IP 65 & IK 08 alumiuium dia cast battery capacity min 20 AH @ 12.8 Volt Solar bldg security lights with inbuilt BMS, IP 65 high brightness W-led (160-180 LM/watt) lamp with aluminium refelector for batter lights distrubution , colour temp 5700k-6500k , Microcontroller based charge controller cum driver , automataic dimming function (first 4 hrs at full brigthness & rest of the time at lower level with PIR motion sensor) ,highly efficent MPPT based charge controller and 12.8V , colour temperature 5000-6500K, IP68 Lithium Ferro Phosphate (LifeP04) battery with proper battery working temperature-10 to 55 C , weight not less then 14-16 Kg Management system. LED lumen efficay shall be at least 180Lm/W AND LED driver should have 90% efficiency s. Typical correlated colour temperature should be 5700K with CRI70. It should ensure battery optimization with help of a suitable Dimming profile . The luminaire shall have a specially designed pole mounting piece that enables lateral as well as post top mounting and installation at varying tilts from 0 to 15 degrees for optimal light distribution . System should have Smart self-diagnostic feature for indicating battery charging ,cut off & fault if any. Company logoshell be engraved to avoid any. company logo . Company logoshell be engraved to avoid any, incl fixing angle bracket and neccassary nut & Bolts etc. complete all as specified and directed by Engineer- in- charge.
100
-
-
... More
Supply and fixing of Lithium based Energy efficient Integrated Solar garden / Bollard Light of max 5 Watt 800 luman lights, new genration, energy saving envioremental friendly long life aesthelically designed weather proof lumaniare IP65 and IK 07 protection die cast aluminium land scape luminaire for down ward lighting with high power LED as , surge protection 100 V -240 V all as per civil work and earth work for fixing of pole is included in the item rate and No extra payment will be done to the contractor.
20
-
-
... More
Supply and fixing LED building security light of 18 W Led Street Light with 3 hrs backup made up of pressure die cast aluminium housing with Polycarbonate cover and unique road optics for better uniformity. The luminaire shall be with higher ingress protection IP66 and impact resistance of IK07. Operating voltage range: 140-270V/50Hz, Lumen efficacy of LED 120Lm/W, CRI≥70, CCT-5700K, & SDCM5. Powered by built-in potted LED driver gives constant light over wide voltage range. Shall have High Voltage cut-off@325V & safety from 440V (P2P) for 8 hours. Surge protection 4 kV, Power factor ≥0.95, THD ≤10 complete including 25x3 mm flat iron with bracket of GI pipe light grade 25 mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting complete all as specified and directed by the Engr-in-Charge.
80
-
-
... More
Supply and fixing LED building security light of 35/36W Led Street Light made up of pressure die cast aluminium housing with Polycarbonate cover and unique road optics for better uniformity. The luminaire shall be with higher ingress protection IP66 and impact resistance of IK07. Operating voltage range: 140-270V/50Hz, Lumen efficacy of LED 120Lm/W, CRI≥70, CCT-5700K, & SDCM5. Powered by built-in potted LED driver gives constant light over wide voltage range. Shall have High Voltage cut-off@325V & safety from 440V (P2P) for 8 hours. Surge protection 4 kV, Power factor ≥0.95, THD ≤10 complete including 25x3 mm flat iron with bracket of GI pipe light grade 25 mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting complete all as specified and directed by the Engr-in-Charge.
80
-
-
... More
Supply and fix 45W Pressure die cast aluminium housing street light with system lumen of 6300 lm and system efficacy of 140 lm/w, IP-66,IK-10 single piece die cast incl spigot, dia 48-76mm,LED lifetime (L70B50) 75000 buring Hrs with integrated optical cover. Street light should have standalone lighting control system with AUTO ON/OFF based on DUSK/DAWN timings,preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, incleds dimming profile for energy savings,drift not exceedind max 2mins/year, clock retention upto five yeras, auto switching off secondary power for module,dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminiarie incl driver and astro module,surge protection as perIEC 61000-4-5 all as specified and directed by engineer in charge.
300
-
-
... More
S & F in replacement street light GI bracket of 1.2 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of flat iron 40 x 6mm with nuts bolts & washers for fixing on wall complete necessary fixing arrangements on pole incl taking out old U/S bracket as directed.
420
-
-
... More
Supply, install, test and commissioning in replacement factory made THERMOPLASTIC/HDPE CABLE JUNCTION BOXES IP 66/67 “weather proof”, with terminals for outdoor installation (with knockouts for cable entry) of with cable entry size of 10-25 sqmm with terminal incl Aluminium bus bar of 63amp----04 Nos and MCB SP 6amp-----01 No. complete fixed on wall all as specified and directed.
80
-
-
... More
Material and labour in replacement for sub main wiring with 16 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 16 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, for single wire in each conduit medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
80
-
-
... More
Material and labour in replacement for sub main wiring with 10 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 10 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
80
-
-
... More
Material and labour in replacement for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.
20
-
-
... More
M & L in replacement for chemical Earthing complete with Copper plate 600 x 600 x 3 mm buried directly in the ground vertically to depth not less than 2.25 Mtr below the ground level with the top edge of earth plate, depth not less than 1.5 Mtr below the ground level connected to copper strip of 20 mm x 3 mm size by means of bolts, nuts and washers , returning & filling the pit with excavated soil mixing with charcoal 250 KG ,crystal salt 200 KG , magnesium sulphate of 100 KG and vegitable soil all around the plate up to 350 mm above from top edge of plate and balance portion filling with excavated soil in layers not exceeding 25mm thick, 25 mm galvanized iron medium grade watering pipe up to top of plate ,50 mm bore galvanized iron light grade pipe for earth strip protection , including all excavation earth work in any type of soil ,PCC 1:3:6 type C1 for chamber of internal size 300 mm X300X300mm with 120 mm thick wall and 700 mmX700mmX150 mm thick ,bed concreate,RCC 1:2:4,type B1 for precast chamber cover 50 mm thick ,reinforced with welded steel wire fabric of XPM jali (weight not less than 4.00 Kg/sqm),funnel,with wire mesh, complete al as specified and directed. Note:- Up to 7.5 Mtr length of pipe of 40 mm dia and copper strip shall be deemed to be included in unit rate quoted by tenderer.
18
-
-
... More
Taking down old U/S DB box of any size and type retreived from existing site complete all as specified & directed.
100
-
-
... More
M&L in replacement for LT Panel factory made DB made out of 2mm thick MS CRCA sheet with powder coated finish complete with IP 43 protection and having 100amp MCCB 4Pole with 4 Nos copper bus bar having size 200Amp complete. Panel size 60 cm in height, 450mm in width and 250mm in depth comp-lete having 3 Nos of digital indicator lamp with 01 Nos of digital Amp meter with 3 Nos of CT of rating 100/5Amp and 01 Nos of digital voltmeter suitable for 415V, 100 Amp capacity complete complete fixed on wall with suitable fastner-04 Nos and angle iron frame incl connection of incoming and outgoing electric supply complete all as specified &directed.
100
-
-
... More
M&L for disconnection of electric supply and water supply pipe line of solar water heater/ collector plates of any size from site for repair/ overhauling/ replacement of unserviceable parts incl nut and bolts with washers and refixing the same in serviceable condition after assembling , testing and re connecting the electrical and water supply line all as specified and directed by Engr-in-charge.
80
-
-
... More
S&F in replacement of heating element 3 KW, suitable for solar water heater(ISI marked) all as per sample and directed by Engr-in-Charge.
80
-
-
... More
Taking down old tank and M&L for replacement of old unserviceable 200 LPD hot water tank fully insulated all as specified and directed by Engr-in-Charge.
10
-
-
... More
Taking down old tank and M&L for replacement of old unserviceable 100 LPD hot water tank fully insulated all as specified and directed by Engr-in-Charge.
10
-
-
... More
M&L for descaling of pipe line with chemical powder and liquid (4 Kg each) of solar collector plates, solar water heating tank all as directed.
10
-
-
... More
M&L for replacement of old unserviceable collector glass panel with heating resistant glass panel of size 2.08 Mtr x 1.01 Mtr of thickness not less than 8 mm incl cleaning of broken glass suitable for 100/ 200 ltrs solar tank complete all as specified.
10
-
-
... More
M&L for replacement of old unserviceable collector panel used for solar water heater based on in directed transfer of heat of capacity 100 LPD
80
-
-
... More
M&L for welding/ grazing work of rusted/ leakage portion of complete set of collector panel including metal/ GI pipe where necessary.
15
-
-
... More
Taking out old U/S insulated pipe and Supply & fix Hot water pipe duly insulated with glass wool and aluminium cladding galvanised iron tubing medium grade with all fittings such as bends, elbows, tees, sockets, reducers, unions etc as required at site laid in walls through proper clamps complete all as specified and directed for 15 mm bore
800
-
-
... More
All as above item No 71 but 20mm dia
80
-
-
... More
Taking down the Geyser of any Size/Type/make from Site for repairs/overhauling/replacement of unserviceable parts including replacement of old nuts and bolts with washers heavy duty including disconnection of electric supply, water supply lines and refixing the the Geyser in the serviceable condition after assembling, testing and reconnecting the electric/ water supply line all as specified and directed.
Note:- Replacement of unserviceable parts of old Geyser shall be measured and paid separately under respective item here in after except bolt, nuts and washers."
200
-
-
... More
Supply and fix in replacement unserviceable heating element 2.0 KW of Geyser (ISI marked) for suitable any type/model/make all as specified and directed.
200
-
-
... More
Supply and fix in replacement thermostat(ISI Marked) suitable for any type, and capacity of geyser all as specified and directed.
200
-
-
... More
Supply and fix in replacement unserviceable indicating lamps red and green colour for suitable any Geysers any make all as specified and directed.
200
-
-
... More
Supply and replacement of unserviceable door assembly ISI marked comprising of inlet and outlet thermostate, housing with gasket with bolts, nuts, washers, screws of packing suitable for any type and make of geyser all as specified and directed.
50
-
-
... More
Supply and fix in replacement Stainless steel inner tank 25 Ltrs capacity as per existing gauge for Geysers all as specified and directed.
10
-
-
... More
Supply and fix in replacement Stainless steel inner tank 35 to 50 Ltrs capacity as per existing gauge for Geysers all as specified and directed.
10
-
-
... More
Taking out old U/S insulated pipe and Supply & fix Hot water pipe duly insulated with glass wool and aluminium cladding galvanised iron tubing medium grade with all fittings such as bends, elbows, tees, sockets, reducers, unions etc as required at site laid in walls through proper clamps complete all as specified and directed for 15 mm bore
250
-
-
... More
Taking out old U/S pipe and Supply, laying, jointing & testing galvanised iron tubing medium grade with all fittings such as bends, elbows, tees, sockets, reducers, unions etc as required at site laid in walls through proper clamps complete all as specified and directed for 20 mm bore
200
-
-
... More
Supply and fix in replacement metallic top suitable for 20 Amp capacity plug & socket all as specified and directed.
200
-
-
... More
Supply and fix in replacement metallic plug base suitable for 20 Amp capacity plug & socket all as specified and directed.
200
-
-
... More
Supply and fix in replacement of brass Safety Valve heavy duty ISI marked of Geyser suitable for 15 mm bore of pipe all as specified and directed.
100
-
-
... More
Supply and fix in replacement 450mm long PVC pipe connection hot series with both side nut with rubber washer suitable for any capacity of Geyser all as specified and directed.
100
-
-
... More
Supply and fix in replacement 600mm long PVC pipe connection hot series with both side nut with rubber washer suitable for any capacity of Geyser all as specified and directed.
300
-
-
... More
Taking down Ceiling fan/Exhaust fan any size any make, sealing cable ends, dismantling blades in case of ceiling fan and removing fan and blades to E/M store yard II for repair & hanging / fixing of the same after repair and connecting up all as specified and directed.
800
-
-
... More
Repair and overhauling of Ceiling fan/ Exhaust fan/ Cabin fan/ Wall mounting fan/ Table fan/ Pedastal fan of any size by oiling/ greasing and reassembling the fan with new split pin, check nut, locking nut, washer, holder clip & connector. Testing and refixing of same fan shall be made to the entire satisfaction of Engineer-in-charge. Note: Repair work will be carried out at MES workshop/at site/ Users Residence as directed. Material required (Ball bearing and Condenser) for replacement of items will be measured and paid separately.
400
-
-
... More
Material and labour for replacement of ball bearing of size 6201/6202/6203 all as specified and directed.
400
-
-
... More
Supply and fix Capacitor 2.5 MFd for ceiling fan of any size and exhaust fan of size 300/230mm cabin fan any Sweep all as specified and directed.
1000
-
-
... More
Rewinding of Ceiling fan of 1200 mm Sweep of followings:
a) Rewinding of stator with supper enameled copper wire (gauge of wire shall be same as provided by the manufacturer) including varnishing the new winding wire with quick dry varnish properly.
b) Replacement of defective worn out bush where required, (ball bearing, capacitor will be measured and paid separately).
c) Oiling/greasing and reassembling the fans with new split pin, check nut, locking bolt, washer, holder clip and connector including providing new twisted twin core flexible copper cable of size 23/0.0076 of 1 Mtr length.
d) Testing of repaired fan shall be carried out in the yard of AGE E/M (East) to the entire satisfaction of the Engr-in-Charge.
Note: Rewinding shall be carried out in Yard No II, Painting of Fans deemed to be include in respective Item.
400
-
-
... More
All as above item no 91 but Ceiling fan of 1400 mm Sweep
100
-
-
... More
All as above item no 91 but Exhaust fan 450 mm (18") to 600 mm (24") Sweep
20
-
-
... More
All as above item no 91 but Exhaust fan 380 mm (15") Sweep
20
-
-
... More
All as above item no 91 but Exhaust fan 300 mm (12") Sweep
100
-
-
... More
All as above item no 91 but Exhaust fan 230mm (9") Sweep
50
-
-
... More
All as above item no 91 but Wall fan 400 mm Sweep
20
-
-
... More
Supply and fixing Twisted twin core flexible copper cable of size 23/0.0076 all as specified and directed.
1000
-
-
... More
M &L, Spray painting of fan with one coat of super enamel white paint after cleaning of body and blades, down rods, with detergent powder and writing MES Nos with black paint all as specified and directed.
400
-
-
... More
M&L, replacement of unserviceable hanging clamp for ceiling fan of any type complete with rubber reel, split pin, bolts, nut and washer all as specified and directed.
100
-
-
... More
M&L, replacement of worn out/defective roter shaft of ceiling fan, exhaust fan, cabin fan of any make and size all as specified and directed.
200
-
-
... More
Taking down U/S Ceiling fan/Exfan/wall fan of any Size/Type/Model and handover MES Store EM Yard-II for BER process.
2914
-
-
... More
Repair/Replacement of S & F SITC of Round shape architectural RGBW LED flood light uitable for outdoor applications of Facade Lighting at AMC C&C main gate with high power LED swith housing Die-cast aluminium alloy - ADC12. The luminaire shall be suitable in size and aesthetically good view as approved by EIC. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper min. IP66 protection. if required the luminaire should have a breather gland.The luminaire shall be equipped with high-power Cree, osram, lumiled or equivalent. The fixture shall have 8°to 40° beam angle and as per site requirement with the approvel of Engg. Incharge & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK08 and above rated clear tempered glass.
4
-
-
... More
The LEDs shall have minimum CRI ≥80 & shall have SDCM≤4. The fixture shall come with power & DMX cable of minimum 750mm length. The fixtures shall be installed with have min. IP67 connectors. The luminaire shall have system wattage not exceeding 80 W and system lumen output of not less than 3900 lumens. Fixture shall operating temperature range of -10°C to 50°C. The fixture shall have an integral driver with input voltage for 220-247 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours at L70 @ 35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White to produce 16.7million colours. The luminaire shall be capable of digital dimming of 65536 steps. The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer. The bidder shall upload the luminaire BIS certificate along with technical bid. The luminaire shall be supplied with necessary connectors for connecting lead/jump cables. Certifications :-CE, CB, CQC, RoHS
-
-
-
... More
Repair/Replacement of S & F SITC of Round shape architectural 5000k LED flood light with housing Die-cast aluminium alloy - ADC12. The luminaire shall be suitable in size and aesthetically good view as approved by EIC. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper min. IP66 protection. if required the luminaire should have a breather gland.The luminaire shall be equipped with high-power Cree, osram, lumiled or equivalent.
2
-
-
... More
. The fixture shall have 8°to 40° beam angle and as per site requirement with the approvel of Engg. Incharge & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK08 and above rated clear tempered glass. The LEDs shall have minimum CRI ≥80 & shall have SDCM≤4. The fixture shall come with power & DMX cable of minimum 750mm length. The fixtures shall be installed with have min. IP67 connectors. The luminaire shall have system wattage not exceeding 40W and system lumen output of not less than 1500 lumens. Fixture shall operating temperature range of -10°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz.
-
-
-
... More
Repair/Replacement of S & F SITC and programming of Compact master Content Program Controller (DMX controller) with capability to control minimum 6/8 DMX512 universes,playback scenes and animations stored in its SD card, and it can be used for offline scenes scheduling, setting brightness, white balance and playback speed adjustments. It should be able to amplify the DMX signal in cascaded connection & support automatic playback scheduling. It should support power-on startup and scheduled timing start along with capability of unattended operation and remote scene triggering if needed. The Content Program Controller shall have integrated LCD display & support remote control. It should be housed in aluminium casing.
1
-
-
... More
The Input voltage shall be 12VDC & shall have 2 RJ45 ports on Input side. The IEC classification shall be Class III. It should operate on DM512 protocol. The output shall have 6/8 X 3P lockable terminals. The power consumption shall be 8W (±10%). The Content Program Controller shall have one SD card slot for maximum 32GB card & the SD card being used shall be FAT32 format. The Content Program Controller shall come with 220- 240V to 12V DC power supply. The IP rating of content program controller shall be IP20 & shall comply to CE certifications. The DMX controller/content program controller shall be from the same make/brand/manufacturer as that of façade lighting luminaires or different make if required will be accepted after approval of Eng. In-charge . The working temperature range shall be -10°C to 50°C. The successful bidder shall submit the technical data sheet for approval before supply of material.
-
-
-
... More
Repair/Replacement of S & F SITC and programming of Compact master Content Program Controller (DMX controller) & 8 watt spike lights 5000k IP 66 with capability to control minimum 6/8 D complete all as specified and as directed.
1
-
-
... More
Repair/Replacement of S & Laying of PVC pipe 32 MM all as specified and directed
100
-
-
... More
Repair/Replacement of S & Laying CAT 6 data cable all as specified and directed
150
-
-
... More
Repair/Replacement of S & Laying 10x 4 sqmm aluminium armoured cable complete all as specified and directed
50
-
-
... More
Repair/Replacement of S & fix IP 65 boxes complete all as specified and directed
6
-
-
... More
Repair/Replacement of Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete all as specified and directed.
900
-
-
... More
Repair/Replacement of Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete all as specified and directed.
500
-
-
... More
Excavation in trenches soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of pipes/cables etc getting out and bottom surface to required gradient complete all as directed & specified
292
-
-
... More
M & L Returning filling in including spreading leveling watering and well ramming in layers each not exceeding 25 cm thickness complete all as specified and as directed
184
-
-
... More
M & L Removal of surplus spoil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed
108
-
-
... More
Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cable for under ground cable complete all as specified & directed. i.e 18 cm punned down thick shall be considerd for mesurement)
105
-
-
... More
M & L Old size sub class 'B' bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable , adjacent/abutting each other complete all as specified
11
-
-
... More
Taking out old unsv and deposite at MES Store yard of S & F PCB suitable for 1200/ 1400 mm sweep ceiling fans 230/240 Volts as per exiting BLDC ceiling fans complete all as specified and directed.
500
-
-
... More
Repair/Replacement of Pressure pump motor, single phase, 230Volts, 50 Hz, of capacity 1.0 HP complete of pressure pumps & systems Model No-100B Pressurejet including making connections complete all as per specified and directed by the Engr-in-Charge.
10
-
-
... More
Taking out old unsv and repai /replacement chimney and Supply,fixing, testing and commssioning electric kitchen chimney, LED lighting, environment frindly ,powerful suction capacity , motion sensor wall mounted, thermal overload protector effective safty feature for motor, all wire are of flame retardant materials for utmost safty,metallic body, pyramid/ plain shape auto clean cuverd glass filterless touch control with motion sensor min 60 cm, min 1200 m3/h suction,3 speed motor setting min150 watt, power of lamp 1.5 watt easy to clean oil collector tray, colour black wall mounted, power saving complete all as specified and directed.
21
-
-
... More
Supply and fixing switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.
1000
-
-
... More
Supply and fixing switch piano flush type, 06 Amp, single pole, two way, 230 volt complete all as specified & directed.
50
-
-
... More
Supply and fixing bell push, flush type, 06 Amp, 230 volt complete all as specified & directed.
100
-
-
... More
Supply and fixing socket outlet 2 in 1, 5 pin, 06 Amp, flush type, 230 volt complete all as specified & directed.
800
-
-
... More
Supply and fixing switch socket combination outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.
400
-
-
... More
Supply and fixing electronic ceiling fan regulator piano type with rotary step, two module, piano type, humfree, AC, 240 volt, 100 Watt and duly ISI marked complete all as specified & directed.
313
-
-
... More
Supply and fix in replacement LED Solar integral AIO bldg security lights with aluminium housing , reliable & robust construction with IP 65 & IK 08 protection, The luminire Litihum / life Po4 battary capacity min 20 Ah @ 3.2 V or 20 W 4.5 watt PV Panel power CRI. = 70, system efficiency 165 lm/W & min luman 4000 sysytem wattage should be more then 25w +- 2%, if wattages increases then the size of battery & panel shall also be inceresed in similar percentage to maintain equal autonomy of the system weight more then 2.32 kg. The fixture should have in microwave microwave motion sensor & senser delay time 18 sec life class of LED 50000 hrs @ must have a certificate of testing incl 60mm dia medium grade GI pipe min 45 mm with cutting drilling and making good with PCC ratio complete all specifiefd and as directed.
170
-
-
... More
Supply and fix in replacement cast aluminium heavy pole designer leg and border designer base finished with polyurethane paint (with prior treatments) diamtr of one leg is approx 76mm outer dia for spiogot entry 60mm 03 Nos "T" shaped bolts with nuts and washers provided for concrete foundation , total length of the pole incl base and legs (base x 03 Nos legs) is 2463 MM (Appx 8 fit 1 inch ) with fully cast aluminium finish polurethane paint( with prior tretments) suare junction with max projection breadth of 625 mm suitable for two number post top lantren with polyurethane ( with prior treatments ) Paint with arylic window cover total length 533 mm and breadth 228 mm.B-22 brass provided with qaluminium cover incl PCC 1:2:3 (size 600 x 600 x 600 mm ) foundation,nut bolts, connecting up complete all as specified and directed.
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements