Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date21 Dec 2024
Closing Date20 Jan 2025
Tender Amount₹ 93,60,000
Costs
EMD
₹ 1,65,400Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_689800_1Tender No
87465/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed
1188
-
-
... More
Dismantling wall and ceiling boards (fibre, pulp, insulation , etc.) or insulation boards/ slabs/ blankets any thikness including cover fillets complete all as specified and directed
1000
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
695.6
-
-
... More
Dismantling water tanks exc 500 but n.exc 1000 ltrs and removing to store complete all as specified and directed
4
-
-
... More
Dismantling/Demolition /striping out of existing roof treatment (terfelt and roof plaster etc) including PCC padding of any discription and any thikness including backing and removal the debris complete all as specified and directed.
4.2
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for windows grill etc. complete all as specified and directed
24.2
-
-
... More
Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store up to complete all as specified as directed.
180
-
-
... More
Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store up to complete all as specified as directed.
80
-
-
... More
Taking down shutters of any description n exc 1 Sqm each complete all as specified and directed
26
-
-
... More
Taking down chowkats or frame not exc 1.5 sqm with shutter (with out taking of shutter from frame) all as specified and removing from site complete all as specified and directed
20
-
-
... More
Taking down wooden chowkhat without taking of shutter from the frame exc 1.5 but not exc 4 Sqm each complete all as specified and directed
8
-
-
... More
Taking down old cement plaster including ranking out joints, hacking for key, scrubbing down with water etc and rubbish off the premisses complete all as specified and directed.
891.92
-
-
... More
Taking down cement or cement lime plaster any description on brick or stone walls, or RCC structure upto 25 m height etc raking out joints, hacking for key scrubbing down with water etc complete all as specified as directed.
336
-
-
... More
Taking down eaves gutters and rainwater PVC/CI pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
190
-
-
... More
Surface Excavation n exc 15 cm deep and getting out of any type of soil complete all as specified and directed.
182
-
-
... More
Excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in any soft/loose soil complete all as specified and directed.
40
-
-
... More
Removing excavated soil to a distance exc 250 m but n.exc 500 m and deposited where directed at a level n exc 1.5 above the starting point complete all as specified and directed.
27.3
-
-
... More
M & L 100 mm thick Hard core, broken brick to gauge n exc 63 mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
27.3
-
-
... More
M&L for PCC 1:4:8 type D-2 (using 40mm stone aggregate) as in foundation complete all as specified and directed.
9.1
-
-
... More
M&L 75mm thick PCC type D-2, (1:4:8) using 40 mm graded stone aggregate in Sub base, etc complete all as specified and directed.
60
-
-
... More
M& L PCC (1:3:6) Type C2( using 40mm stone agg) as in foundations filling and mass-concrete complete all as specified and directed.
10
-
-
... More
M/L PCC (1:3:6) Type C1 (using 20 mm graded stone agg) as in coping etc complete all as specified and directed.
1.84
-
-
... More
M&L PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) base of surface chanel and drain complete all as specified and directed.
2.7
-
-
... More
M & L 75mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate in Sub base, hard standing , plinth protection etc finished the surface even & smooth without using extra cement complete all as specified and directed.
260
-
-
... More
M & L for PCC 1:2:4 type B1 (Using 20 mm graded aggr) as in curve stone and coping of drain similar works incl necessary from work complete all as specified and directed.
5.75
-
-
... More
M/L PCC (1:2:4) Type B2 (using 12.5 mm graded stone agg) as in surface channel, benching etc complete all as specified and directed.
3.5
-
-
... More
M&L for Precast RCC 1: 2:4 type B1 (nominal mix ) using 20mm graded stone aggregates as in drain/MH cover slab etc complete all as specified and directed.
10.51
-
-
... More
M&L 100 mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate in Sub base, hard standing , plinth protection etc finished the surface even & smooth without using extra cement complete all as specified and directed.
100
-
-
... More
M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified as directed.
33.46
-
-
... More
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine Ganga sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
242
-
-
... More
Extra for forming fair finished drain or channel 55 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and directed
120
-
-
... More
S & F 10mm dia MS TMT bars cut to legth, bent to shape required including cranking bending spirally for hooping for slab for manhole etc complete all as specified and directed.
990.9
-
-
... More
M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed.
208
-
-
... More
M&L Rendering 5mm thick in CM 1:3 on ceiling, finished even and smooth without using extra cement complete all as specified and directed.
144
-
-
... More
M&L Rendering 5mm thick in CM 1:3 on wall, column & ceiling of dome ( top and bottom )surfaces upto 25 m height for finished even and smooth without using extra cement complete all as specified and directed.
336
-
-
... More
M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified as directed.
136.72
-
-
... More
M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions ( WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified as directed.
211.2
-
-
... More
M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions ( WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified as directed.
200
-
-
... More
Rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
200
-
-
... More
Supply only liquid water proofing compound complete all as specified and directed.
10.1
-
-
... More
Supply only integral water proofing compound complete all as specified and directed.
11
-
-
... More
M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick jointless set and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed.
359
-
-
... More
S&F joint free non skid coloured ceramic tiles 7 to 8mm thick(square / rectangular ) area of each tile n.exceeding 0.11 sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cm 1:6 etc complete all as specified and directed.
121
-
-
... More
M&L machine cut kota stone slab flooring 18-20 mm thick over 20 mm thick (1:6) cement screed bad laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
100
-
-
... More
M&L machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick cement plaster in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
8.8
-
-
... More
M & L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
100
-
-
... More
M & L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed by Engr in Charge
6.8
-
-
... More
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
95
-
-
... More
S&F factory made solid pannel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with neat moulded plan colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on eithor side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the MS frame welded/sealed to the stiles, and rails with suitable PVC sheet bedding and jointed together with solvenet cement, supply and fixing in the frame at site as per specification complete all as specified and directed.
30
-
-
... More
S & F powder coated anodised aluminium (sliding/hanging type) windows/ventilator with three track bottom track size 92 X 29.5 X 1.5 mm thick, side & top track frame size 92 X 29.5 X 1.5 mm thick and shutter aluminium anodised 39 X 20 X 1.5 mm thick incl necessary aluminium fittings like jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with 5mm thick tinted/plain glass in panels and stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm incl all fittings & fixture complete all as specified and directed.
13
-
-
... More
M & L powder coated anodised aluminium (sliding/hanging type) windows/ventilator with three track bottom track size 92 X 29.5 X 2mm thick, side & top track frame size 92 X 29.5 X 2mm thick and shutter aluminium anodised 39 X 20 X 2 mm thick incl necessary aluminium fittings like jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with 5mm thick tinted/plain glass in panels and stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm incl all fittings & fixture complete all as specified and directed.
5.4
-
-
... More
S & F 35mm thick factory made plain framed, panelled shutter(two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003(part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
30
-
-
... More
S & F Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.
52
-
-
... More
M&L for PCC 1:3:6 type C1 as in hold fast blocksand filling in pressed steel frame and fasning of hold fast incl. Necessary form work
0.35
-
-
... More
S & F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
20
-
-
... More
S & F in repair for 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.
20
-
-
... More
S&F in repairs Ocean wall mixer with adjustable wall flange, for mixing hot & cold water screwed down for iron pipe of 15mm bore complete all as specified and directed.
(Make ; CERA Cat Part No F-3001404) equivalent as per Appendix 'B'.
12
-
-
... More
S&F 100mm size butt hinges medium weight cold rolled milled steel complete all as specified and directed.
108
-
-
... More
S & F 75 mm size butt hinges medium weight cold rolled milled steel complete all as specified and directed.
10
-
-
... More
S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
16
-
-
... More
S&F 150mm aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.
20
-
-
... More
M&L for 150 mm size Aluminium handle cast type anodiesd complete all as specified as directed.
56
-
-
... More
S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
8
-
-
... More
S&F in repair vitreous china ware wash hand basin 550mm x 400 mm size, white, flat back or angle including removing the existing one complete and refixing with new bracket and making good all connections complete all as specified and directed.
12
-
-
... More
S&F in repair Vitreous China wash down water closet pan (pedestal pattern, with EWC including p or s trap ,seat cover , including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floor complete all as specified as directed.
7
-
-
... More
S&F in repair vitreous china wash basin white flat back size 550 X 400mm excluding taps ,including waste cupling,waste pipe , complete all as specified and directed.
1
-
-
... More
S&F in repairs vitreous China squatting pan, "Orrissa" pattern, size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in cement concrete bedding1 : 2 : 4, Type B-1, using 20 mm graded crushed stone aggregate minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes including making good floor complete all as specified and directed.
5
-
-
... More
S& F in Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.
4
-
-
... More
S & F in repair 32 to 40mm dia PVC waste pipe for wash basin and kitchen sink complete all as specified and directed.
1
-
-
... More
S & F in repairs 15 mm bore PVC connection 600 mm long with brass nuts and washers on both ends complete all as specified and directed.
60
-
-
... More
S & F in repair brass chromium plated shower rose 125mm size size fixed to pipe complete all as specified and directed.
12
-
-
... More
S & F in repair for Brass chromium plate towel rail 600mm long complete all as specified and directed.
15
-
-
... More
S&F in repair Soap dish, vitreous China white, aprroximate size 160x 160x90mm complete all as specified and as directed.
15
-
-
... More
Supply and fix in repairs 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed complete all as specified and directed.
15
-
-
... More
S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
12
-
-
... More
S & F in repairs brass chromium plated two way angle cock, of 15 mm bore complete all as specified and directed.
12
-
-
... More
S & F in repair stop valves 15 mm fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
12
-
-
... More
S & F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
1
-
-
... More
S & F in repair Gun-metal, globe 20 mm or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
10
-
-
... More
S & F rotational moulded polethylene water tank of 1000 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 1000 ltr complete all as specified and directed.
4
-
-
... More
S&F in repair 600mm x 450mm bevelled edge mirror 5.5mm to 6mm thick selected quality glass flaw less, firmly mounted on 6mm thick commercial ply wood backing and fixed to wooden plug with chromium plated brass screw and cup washer complete all as specified and directed.
12
-
-
... More
S & F steel water tubing `medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified and directed.
180
-
-
... More
S & F steel water tubing `medium grade’ galvanized 20 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified and directed.
80
-
-
... More
S & F 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed.
12
-
-
... More
S & F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches as in floors, complete all as specified and directed.
50
-
-
... More
S & F for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches as in floors, complete all as specified and directed.
120
-
-
... More
S & F for 110mm bore PVC (SWR) bends provided with access door complete all as specified and directed.
20
-
-
... More
S & F for 75mm bore PVC (SWR) bends provided with access door complete all as specified and directed.
16
-
-
... More
S & F Cast iron pipes 100mm with spigot and socket ends, vertically cast, class A, in any length complete all as specified and directed.
20
-
-
... More
Roughening surfaces of old concrete Surface by sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified & directed.
80
-
-
... More
M&L for 40 mm thick PCC roof padding 1:2:4 type B-0, 12.5 mm graded stone aggregate in floors , finished smooth complete as specified and directed.
80
-
-
... More
M&L for 10 mm thick screed bed or bedding layer of mortar in CM 1:3, using Liquid Water Proofing Compound as per manufacturer's instruction, laid in roof finisshed even and smoooth without using extra cement (WPC shall be paid separately) complete all as specified and directed.
80
-
-
... More
M&L PCC in roof kerbs of mud stops, rounded or chamfered on edges and base of Over head tank type B1 (1:2:4) using 20 mm graded aggregate complete all as specified and directed.
1
-
-
... More
M&L for water proofing treatment to flat roofs and edges (vertical or tapered) etc. in following sequence:- (i) Properly cleaning and drying the surface
(ii) Applying a coat of bitumen primer @ 0.25 Kg/Sqm (iii) Applying a coat of hot air blown grade bitumen 85/25 @ 1.2 Kg/Sqm (iv) Laying 3mm thick APP modified water proofing membrane with 100mm overlaps, sealed and bonded to the surface by 'torchon' method as per manufacturer's instructions complete all as specified and directed.
80
-
-
... More
M & L 20Cmx20cm x20mm pre cast concrete tile over and including 15 mm Screed bed mix 1:4 with 5% of liquid WPC complete all as specified and directed.
Note : WPC qty measured Seperatly
80
-
-
... More
Material and labour for treating the sunken floor with preparing surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with funny bags to remove all loose dirt etc, applying consisting of the following operation:-
(a) 10mm thick plaster/screed bed in cement mortar 1:3 complete mixed with liquid water proofing compound as per manufactures instructions complete all as specified & directed (Note - WPC shall be measured and paid separately).
(b) Cleaning floor surface by wire brush brooming & removing dust & shall be painted with a coat of bituminous primer conforming to IS : 3384-1986 @ 0.3 Ltr per Sqm uniformily complete all as specified & directed.
21.6
-
-
... More
(c) After primer the entire roof surface applying tack coat of hot blown bitumen grade 85/25 grade conforming to 702-1988 @ 1.2 Kg per sqm over primer.
(d) Over hot bitumen laying polymeric water proofing membrance conisting of 90 to 100 micron thick center core of HMHDPE Film with standard weight not less than 3 Kg per Sqm over entire area laid with 100mm side lap/end lap on prepared surfaces as per manufacture's technical instruction & sealed complete all as specified & directed.
(e) Again the entire floor surface applying tack coat of hot blown bitumen grade 85/25 grade conforming to IS 702 @ 1.2 Kg per sqm.
-
-
-
... More
M & L 40 mm tube galvanised iron light grade cut to required size as per site requirement to be placed in sunken portion of toilet/bathroom and taking out old pipe complete all as specified and directed.
10.8
-
-
... More
S&F in repairs CP Grating doom 100 mm dia with waste hole complete all as specified as directed.
30
-
-
... More
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
1300
-
-
... More
S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding /ridges etc , fixed with self tapping screws complete all as specified and directed.
88
-
-
... More
S& F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.
8
-
-
... More
S & F Anodised alluminium snap grid frame work size 605mm X 605mm for fall ceiling complete all as specified and directed.
1000
-
-
... More
M & L for 4 mm thick Non asbestos fibre cement building boards fixed or laid/ insertyed to trimber/ GI/ aluminium frame, fixed in ceiling complete all as specified and directed.
1000
-
-
... More
S & F framed work such as grills, gratings etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusteres, walk ways, railings, frame work of water tanks and similar work complete all as specified and directed.
200
-
-
... More
M & L Rolled mild steel work as in roof trusses framed , trussed purlin, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee, angle, channel or flat sections) including distance pieces etc Fe 410-W (Gde-E-250 quality - A) including notching, drilling, fitting, riveting, welding complete all as specified and directed.
5300
-
-
... More
S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
220
-
-
... More
S & F 1.6 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
6.3
-
-
... More
S & F 1 mm Plain,& galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as specified and directed .
30
-
-
... More
S & F Rolled mild steel plates plain or chequered as in guesset plates, base pletes etc Fe 410-W (Gde-E-250 quality - A) including notching, drilling, fitting, riveting, welding complete all as specified and directed.
300
-
-
... More
M & L Mild steel screw or bolts (machine made) with hexoganal or square heads at one and screwed the other, or screwed both ends each screwed end to be filled with washers and hexogonal or square nut ,not exceeding 5cm long and diameter of neck 5 to 10mm complete all as specified and directed by Engineer-In-Charge.
70
-
-
... More
M & L for preparation of old painted surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.
300
-
-
... More
M & L preparation new plastered surfaces of any description , including cornices and applying three coats of white wash on ceiling complete all as specified and as directed.
144
-
-
... More
M&L for providing steel scoffolding for plastering , painting and complete removal of existing external and internal surface by Washing, rubbing down and stopping of old distempered and painted surfaces of water retaining structure (over head tank)as complete all as specified and directed.
1
-
-
... More
Complete removing of existing treatment on wall /roof projection including facia, cornices etc by scraping with mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust,loose paint etc by skilled labour complete all as specified and directed.
400
-
-
... More
M&L for Complete removal of existing external surface by Washing, rubbing down and stopping of old distempered and painted surfaces of wall , column & ceiling upto 25 m height including scaffolding as complete all as specified and directed.
624
-
-
... More
M & L for preparation of old distempered and painted surfaces of wall and applying two coats of OBD complete all as specified and as directed.
100
-
-
... More
M & L for providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting complete all as specified and directed.
2500
-
-
... More
M&L for preparation of new plaster surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified as directed.
411.2
-
-
... More
Preparation of new plaster surfaces of wall and applying two coats of distemper oil emultion over a coat of primer/putty with roller complete all as specified as directed.
336.72
-
-
... More
M & L Preparation of old plaster surfaces of wall including complete removal of existing treatment and applying two coats of distemper oil emulsion complete all as specified as directed.
500
-
-
... More
M & L for Complete removal of existing external surface by Washing, rubbing down and stopping of old distempered and painted surfaces of wall complete all as specified and as directed.
1500
-
-
... More
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
2100
-
-
... More
M&L for applying two or more coat of 100% premium acrylic emulsion paint having VOC less than 50gmLtr and UV resistance as per IS 15489:2004,Alkali & fungal resistant dirt resistance exterior paint of requiredshed (Company Depot Tinted ) with silicon additives @ 1.43 Litre /10 sqm over and including priming coat of exterior primer appied @ 0.90Litre /10sqm upto 25 m height for required colour complete all as specified and directed . Note- Primer ,emulsion to be carried out throught air less spray machine (Mechanical means).
960
-
-
... More
M&L for preparation of old painted wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
150
-
-
... More
M & L for preparation of new painted wooden based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
45
-
-
... More
M & L preparation of old painted steel surfaces of any description, over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed .
400
-
-
... More
M&L preparation of old painted steel surfaces of any description, over 10cm width or girth and apply one coat of synthetic enamel paint upto 21m height complete all as specified and as directed .
50
-
-
... More
M&L preparation of new painted steel surfaces of any description, over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed .
190
-
-
... More
M & L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian (Hindi & English) letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white base synthetic enamel paint, complete all as specified and directed.
3
-
-
... More
Taking down carefully point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.
249
-
-
... More
Taking down old and u/s sub main wiring of 2/3 runs of any sizes from any position and making good disturbed surface of wall/ ceiling etc complete all as specified and directed.
360
-
-
... More
Taking down ceiling/wall mounted lights of any wattage alongwith accessories and refixing the same after execution of necessary repair work complete all as specified and directed.
92
-
-
... More
Taking down old unserviceable MCCB DBs / MCB DB / Main Switches including MCBs/ MCCBs/ Isolaters, complete all as specified and as directed.
Note: Any disturbed surfaces of wall will be matched properly as the existing colour surfaces.
8
-
-
... More
Material and labour for point wiring with two single core 1.5 sqmm cable (nominal area) stranded copper conductor, PVC insulated unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia with sunken type pressed steel terninal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes including all accessories and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly complete all as specified and directed for following :-
-
-
-
... More
One light point/fan point controlled by one switch
140
-
-
... More
One ceiling Fan, Exhaust Fan point controlled by one 6 Amps switch.
47
-
-
... More
One 3 Pin 6 Amps socket point on the independent board.
38
-
-
... More
All as per item above but for point wiring for power point with 2.5 Sqmm (nominal area) PVC insulated copper cable 1100 Volt grade drawn through and including heavy duty PVC conduit ISI marked as required at site along with accessories with 1.5 Sq mm PVC insulated stranded copper conductor cable connected to common earth dolly with all accessories for 15/16 Amps socket outlet point.
24
-
-
... More
M&L Switch piano flush type single pole, one way 5 Amps 230 Volts AC circuit complete all as specified & directed by Engr-in-Charge.
36
-
-
... More
M&L for socket outlet 5 Amps, 5 Pin flush type multipurpose, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge.
8
-
-
... More
M&L for socket outlet 2 in 1, 3 Pin 5 & 15 Amps, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge.
4
-
-
... More
M&L Switch piano flush type single pole, one way 15 Amps 230 Volts AC circuit complete all as specified & directed.
4
-
-
... More
M&L for ceiling rose surface bakelite 63.5 x 20 mm, three terminals complete all as specified and directed.
20
-
-
... More
M&L for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
8
-
-
... More
S&F Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete all as specified and directed.
189
-
-
... More
S&F Modular switch 1 way 16A, 1 module, flush button single pole, one way, complete all as specified and directed.
20
-
-
... More
S&F Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.
30
-
-
... More
S&F modular socket outlet 2 in 1, 6 pins 6A and 16A, combined module, complete all as specified and directed.
20
-
-
... More
S&F modular fan regulator 230 Volts complete all as specified and directed by Engr-in-charge
34
-
-
... More
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
12
-
-
... More
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
8
-
-
... More
S&F 22 watt LED light fitting engineering extruded aluminium batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Philips BN021LED22S or equivalent as per appendix B
10
-
-
... More
S&F recess mounting LED luminaire of size 2'x2' white 30 watt, 230 volts for ceiling with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. Make:- Philips RC360BLED30S or equivalent in as per appendix B
20
-
-
... More
M&L for concealed sub main wiring with 2 Nos single core PVC insulated unsheathed 4.0 sqmm stranded copper conductor cable (FRLS) and 1 No single core PVC insulated-unsheathed 4.0 sqmm stranded copper conductor cable (FRLS) for earth continuity, drawn in & including suitable PVC conduit pipe with all fittings ISI mark of Ivory/Grey/white colour medium grade fixed in wall or on ceiling complete all as specified and directed. Note: (i) Length of 2 No 4.0 sqmm conductor cable, 1 No 4.0 sqmm conductor earth continuity cable and accessories shall be measured as one unit length. (ii) Cutting chases and making good of distubed surfaces shall deem to be including in the unit rate quoted by Tendrer.
360
-
-
... More
M&L for concealed sub main wiring with 2 Nos single core PVC insulated unsheathed 6.0 sqmm stranded copper conductor cable (FRLS) and 1 No single core PVC insulated-unsheathed 6.0 sqmm stranded copper conductor cable (FRLS) for earth continuity, drawn in & including suitable PVC conduit pipe with all fittings ISI mark of Ivory/Grey/white colour medium grade fixed in wall or on ceiling complete all as specified and directed. Note: (i) Length of 2 No 6.0 sqmm conductor cable, 1 No 6.0 sqmm conductor earth continuity cable and accessories shall be measured as one unit length. (ii) Cutting chases and making good of distubed surfaces shall deem to be including in the unit rate quoted by Tendrer.
200
-
-
... More
Supply and fix MCCB 4 Pole, 415 V, Adjustable type, 125Amps with breaking capacity 25 KA complete all as specified and directed.
3
-
-
... More
Supply and fix MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 25 KA complete all as specified and directed.
1
-
-
... More
Supply and fixing MCB single pole 240 volt C curve 10 KA 5 to 32 Amps capacity incl taking down old one complete all as specified and directed.
100
-
-
... More
Supply and fixing MCB single pole & neutral 240 volt 'C' curve 10 KA 40 Amps incl taking down old one complete all as specified and directed.
6
-
-
... More
Supply and fixing MCB single pole & neutral 240 volt 'C' curve 10 KA 40 Amps complete all as specified and directed
4
-
-
... More
Supplying and laying of Tubes, 'medium grade ', galvanised iron of size 15 mm dia bore, with all fitting (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, or fixed to walls etc. including cutting, threading and screwing etc complete all as specified and directed.
10
-
-
... More
S & F Bib taps chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15 mm dia complete all as specified and directed.
4
-
-
... More
S & F Stop valves, fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15 mm dia complete all as specified and directed.
4
-
-
... More
S & F PVC connections 15mm size with PTMT nuts of length 600 mm suitable for hot water complete all as specified and directed.
8
-
-
... More
Supply and fix in replacement exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and complete with louvers shutters , ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing complete all as specified and directed.
Note:- Old U/S exhaust fan to be deposited at MES store yard.
16
-
-
... More
Supply and fix in replacement exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and complete with louvers shutters , ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing complete all as specified and directed.
Note:- Old U/S exhaust fan to be deposited at MES store yard.
5
-
-
... More
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed
4
-
-
... More
Supply only modular type PVC enclosure with a two pin and earth plug and socket 16 Amps complete with one single pole MCB 20/25 Amps capacity complete all as specified and directed.
8
-
-
... More
Supply and fixing factory made epoxy powder coated distribution board VTPN 4 ways Single door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.
4
-
-
... More
Supply and fixing factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified and directed
8
-
-
... More
Shifting of Split type ACs of any capacity (Indoor Unit as well as Outdoor Unit) to nearby location not more than 15m away including removal/cutting and reconnecting by welding of suction and discharge copper tubing andchecking leakage and re-filling of gas. Drain pipe for removal of water through AC of size 20mm also be provided from AC to outer side of bldg complete all as specified and directed.
Note : Rate quoted shall be inclusive the cost of Gas and Mounting bracket for outdoor unit of AC.
8
-
-
... More
Taking out old existing earthing and M&L for new earthing complete with galvanised steel plate electrode 600mm X 600mm X 6mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.50 Mtrs below ground level connected to glavanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel earth wire protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with 6mm dia M.S. round bar placed 75mm c/c and handle of 10mm dia, MS bar made to shape, GI medium grade 20 mm bore pipe for watering perforated at bottom, 1.75 meter long placed on top edge of earth plate, common salt & charcoal filling, funnel, wire mesh and excavation, returning filling, removal of earth work not exceeding 50 meters all as per electrical plate No 5 of SSR Part I (2009) and connected to earth test points all as specified and directed including testing on completion.
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%