Military Engineer Services Tender

S&F in repairs of stainless steel curtain rod 20-25 mm dia bore with brackets and fancy type top both end cut to length as reqired of colour as selected & directed by Engr-in-charge. Note : The fancy type top of both ends to be provided of each length of curtain rod and the rate are inclusive of running meter of rod.

S&F in repair looking mirror 600 x 450mm beveled edges of selected quality glass mounted on 6mm commerical ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws, complete all as specified and directed.

S&F in repair double legged door stopper of aluminium alloy for door shutters with rubber complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size including hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed complete all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane including hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed complete all as specified and directed.

Petty repairs to leaking water in PVC connection, GI pipe joints, such as tee, bends socket, nipple upto 15-20mm dia other minor accessories to make the system functional complete all as specified and directed by Engr-in-charge.

S&F in repair mild steel helical door spring 150 mm long ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S&F in repair 300 mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F in repair aluminium anodized barrel tower bolts of extruded section length of bolt 150 mm complete all as specified and directed.

S&F in repairs extruded aluminium alloy handles fabricated type 150 mm long complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Petty reapirs to low level flusing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend incl replacing of rubber washer cheek uts plunges etc for any type of flush complete all as specified and directed by Engr-in-charge.

S&F in repairs brass chromium plated towel rail of 450 mm long complete all as specified and directed

S&F in repair 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed(Minimum weight 15mm-90gms) complete all as specified and directed

S&F in repair 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) complete all as specified and directed

S&F in repair 15mm dia stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-90 gms) complete all as specified and directed

S&F in repair 15mm dia angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-90 gms) complete all as specified and directed

S&F in repair 20 mm bore ball/float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and as directed.

S&F in repair 15 mm bore ball / float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 142 gms) complete all as specified and as directed.

S & F in repair Gun-metal, globe or gate valve, 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm, complete all as specified and as directed.

S & F in repair Swivel shower of PTMT any colour for fixing with 15 mm pipe, (Minimum weight 40 grms), complete all as specified and as directed.

S & F in repair Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour, (Minimum weight 40 grms), complete all as specified and as directed.

S&F in repair waste fittings brass,chromium plated for WHB with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of size 32 mm dia complete all as specified and as directed.

S&F in repair waste fittings brass,chromium plated for sink with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of size 40 mm dia complete all as specified and as directed.

S&F in repairs PVC waste pipe 32 mm dia, 800 mm long, complete all as specified,

S & F in repair 10 litre capacity, PVC valveless, symphonic action type, flushing cistern low level, white with inlet, ball valve float, and handle including brackets and connections to pipes, complete all as specified and as directed.

S&F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40 grms), complete all as specified and as directed.

S & F in repair Vitreous china wash basin , white , flat back, size 550 x 400 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.

S & F in repair Vitreous china squatting pan 'orrisa' pattern size 580 x 440 mm white integral floor rests ( excluding flushing cistern ) including connection to trap and to flushing pipe anti syphonage pipe etc complete including making good to floor, complete all as specified and as directed.

S&F in repair MS brackets for WHB/kitchen sink including taking out of existing WHB and kitchen sink and fixed in same position including making good etc complete all as specified and directed.

S&F in repair kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall as with fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm complete all as specified and as directed.

Taking down 15 mm dia GI steel tubing and connection, including cleaning for refixing or removal, completed all as specified and directed.

Taking down 20 mm dia GI steel tubing and connection, including cleaning for refixing or removal, completed all as specified and directed.

S&F tubes 15 mm bore dia, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

S&F tubes 20 mm bore dia, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Re-fixing of 15 mm bore old steel tubing and connection in new or old position fixed in wall or floor ,ceiling etc as directed.Note: Old GI tubing retrived from item no 36 shall be reused)

Re-fixing of 20 mm bore old steel tubing and connection in new or old position fixed in wall or floor ,ceiling etc as directed.Note: Old GI tubing retrived from item no 37 shall be reused)

S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), white colour, triple layer construction, hoisted & fixed in position, including dismantling of old tank & removing to where directed complete all as specified and as directed.

S&F in repairs PVC Lid cover for water storage tank of any capacity cover of PVC over head tank any capacity with hinging device, with necessary nuts, bolts and washers, complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 & n.exc 500 liters of capacity complete all as directed. Note :- Date of cleaning shall be written on tanks by using stencil letters with 10 cm high from synthetic enamel paint.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing , removing serviceable tiles to store and rubbish off the premises complete as directed.

M&L non skid coloured ceramic digital tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed or bedding in CM 1:6 complete all as specified and directed.

M & L for glazed ceramic coloured tiles 300x200 mm with colour & design as per direction of Engr in charge, fixed in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering 10 mm thick in cement plaster 1 : 4 as backing coat for fixing tiles complete all as specified and directed .

Demolition of brick work masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed.

M & L Brickwork with sub- class ‘B’ bricks old size bricks straight or curved on plan exc 6 m mean radius in CM 1:6, complete all as specified and directed.

M & L for providing cement concrete in type B-1, 1:2:4 mix (using 12.50mm graded stone aggregate) as in kerb stone, coping, benching and rounded or chamfered on edges, and similar work including necessary form work completed all as specified and directed.

Taking down rain water / vent pipes (any size & pattern) including all fittings, heads, noses, bends, swan necks etc including cleaning or repairing or emoval to store, complete all as specified & directed.

S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls complete all as specified & directed..

S & F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) bends and making good in cement mortar 1:4 in wall, complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) bends and making good in cement mortar 1:4 in wall, complete all as specified and as directed.

S&F in repairs rubber beading 75mm wide fixing with nail/screw, complete all as specified and directed.

M&L for repairs to velly gutter between the verandah and kitchen portion by providing necessary clamps of flat Iron 25mm x6mm for holding/fixing the mild steel black/plain sheet of thickness not less than 1mm and the length of valley gutter not exceeding 2.00 mtr and girth not exceeding 1.00mtr fixing by means of drilling, clipping and incuding packing with cement Mortar in CM 1:3 including taking out of old galvalume sheet and refixing in the same position after necessary repairs of valley gutters and testing by filling water to avoid any leakage complete as per site situation/condition and as directed by Engr-in-Charge .

M&L rendering 15mm thick in CM 1:4 to patches of damaged/loose portion of external surfaces of wall not exceeding 1.00 Sqm including preparing and removing/taking down existing loose portion of plastering surfaces and matching with exisisting finished surfaces by providing two coats of cement based paint over primer complete all as specfied and directed . Note: The repair work of plaster including finishing surfaces shall be done upto 7th floor and cost of scafolding shall be deemed to inclusive of unit quoted rate.

M&L rendering 15mm thick in CM 1:6 to patches of damaged/loose portion of external surfaces of wall. area not exceeding 2.00 Sqm including preparing and removing/taking down existing loose portion of plastering surfaces and matching with exisisting finished surfacesby providing two coats of oil emulsion distamper over 2.00 mm thick wall care putty complete all as specified and directed. Note: The repair work of plaster including finishing surfaces shall be done upto 7th floor shall be deemed to inclusive of unit quoted rate.

M&L rendering in 10 mm thick in CM 1:3 to patches of damaged/loose portion of ceiling surfaces of wall not exceeding 2.00 Sqm including preparing and removing/taking down existing loose portion of plastering surfaces and matching with exisiting finished by providing three coats of white wash complete all as specfied and directed .

M&L for filling the gaps of joints of tiles area not exceeding 2.00 Sqm of grating/WHB or any other similar articles by applying Birla white cement complete all as specified and directed by the engr-in- charge.

M&L for preparing old plastered surface of wall and applying one coat of acrylic distemper oil emulsion complete all as specified and directed by the Engr -in-Charge

Note applicable for all items: (a) The contractor shall be employee adequate numbers of of tradesman/labour for timely completion of the complaint as per time frame given below :- (i) Priority-I : Complaints pertains to major water leaks, air locks, flushing cistern will be attended on priority-I and the same will be completed within 4 to 8 hrs. (ii) Priority-II : Compaints pertains to minor water leaks, reglazing of door and windows, easing of joinery will be attended on priority-II and the same to be completed within 48 hrs. (iii) Priority-III : Compaints pertains to water proofing of roof, repair of sunken slab, minor plaster work, re-flooring, replacement of joinery minor etc will be attended on priority-III and the same to be completed within one week. (iv) Priority-IV : Major plastering, reflooring, plinth ptotections, brick work etc will be attended on priority-IV and the same to be completed within one month. (v) Contractor or his supervisor shall collect the complaint/job card from JE concerned between 0900 hrs to 1000 hrs on all working days and deposited the same after completion of job duly signed by user/occupants. (vi) Summary of complaints will prepared by the contractor and put up to Engineer-in-Charge last date of every month. (vii) If contractor shall not attend the complaint as per time frame given in Para (i) to (iv), Rs 50/- per complaint will be recovered from the RAR/Final bill.