Military Engineer Services Tender

One bell point controlled by one bell push on independent board.

One 3 pin 5 Amps socket outlet on independent board

One 3 pin 5 Amps socket outlet on Sameboard

One light point controlled by two 2-way switch.

All as per item No 2 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.

Material and labour for Point wiring complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 voltsgrade confirming to IS-694 drawn through and including non metallic rigid PVC heavy duty concled conduit minium 20 mm dia,but shall be increased as per actual site requirement in accordance with clause No.19.125 of SSR Part-I ,with necessary accessories with Flush mounting boxes & white plates with frames housing of switches sockets / fan regulator etc. including 1.5 Sqmm single core solid multitranded copper conductor FRLS 1100 volts grade PVC insulated and unsheathed cable as earth continuity conductor to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge for;- (Note :- The cost of Mudular mounting boxes and modular plates included in the quatated rates) Make : (i) Flush mounting boxes Cat Part Module 18 from model No 6890-07 to 6890-12 of legrand or equivalent in havells, SIEMENS. (ii) White Plates : upto 18 module from No Mylanic series model No 6755 61 to 6755 78 of Legrand or equivalent in Havells / Siemens / Crabtree

One light point or one fan point controlled by one switch

One bell point controlled by one bell push on independent board.

One 3 pin 5 Amps socket outlet on independent board

One 3 pin 5 Amps socket outlet on Sameboard

One light point controlled by one, two way switch single pole.

All as per item No 2 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket outlet on independent board.

S&F 6 A one-way SP switch - 1 module of Make Legard Cat No: 6755 01 or equivalent in Simens / Carbtree all as specified and directed.

S&F 6 A two-way SP switch - 1 module of Make Legard Cat No: 6755 02 or equivalent in Simens / Carbtree all as specified and directed.

S&F 16 A one-way SP switch - 1 module of Make Legard Cat No: 6755 11 or equivalent in Simens / Carbtree all as specified and directed.

S&F 6 A 3 pin universal socket 2 modules of Make Legard Cat No: 6734 52 or equivalent in Simens / Carbtree all as specified and directed.

S & F 6/16 A socket 2/3 Pin combined 2 modules of Make Legard Cat No: 6734 55 or equivalent in Simens / Carbtree all as specified and directed.

in Repair 6/16 A socket 2/3 Pin combined 2 modules of Make Legard Cat No: 6734 55 or equivalent in Simens / Carbtree all as specified and directed.

S & F 6 A one-way SP bell push - 1 module SP switch - 1 module of Make Legard Cat No: 6755 04 or equvalent in Simens /Carbtree all as specified and directed.

S & F Fan regulator 100 W with 360° rotation 2 module of Make Legard Cat No: 6759 64 or equvalent in Simens /Carbtree all as specified and directed.

S&F bell, AC, 230 Volts, single pole all as specified and directed.Make: Anchor/Havells/Standard

S&F ceiling rose surface bakelite three terminal all as specified and directed. Make : Anchor/Havells/Standard

S & F in replacement double door Sheet metal enclosures factory made DBs 4 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No:5076 10 or equivalent in Simens/ Hager/ L & T

S & F in replacement double door Sheet metal enclosures factory made DBs 8 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No: 5076 11 or equivalent in Simens/ Hager/ L & T

S & F in replacement double door Sheet metal enclosures factory made DBs 4 way , 415 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No:5076 70 or equivalent in Simens/ Hager/ L & T

S & F MCBs of the under mentioned type and rating and fixing in DBs (DBs measured and paid for separately) (Note :- Make of the isolator should be the same as that of DB) for the following :-

(a) MCB Single Pole of 240 volts 5-32 Amps,10 KA Capacity, 'B' series of Make: Legrand / Simens/ Hager/ L & T

(b) MCB Single pole + Neutral 240 volts, 32 Amps,10 KA Capacity, 'C' series of Make: Legrand /Simens/ Hager/ L & T

(c) MCB Triple pole + Neutral 415 Volts ,40 -63 Amps,10 KA Capacity, 'C' series of Make: Legrand/Simens/ Hager/ L & T

Supply and fix LED batten luminaire surface mounted ,4 feet system wattage of not less than 18 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI80, Power Factor 0.95, THD 10%, colour temperature - 4000 to 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over Current protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level 120 Lumens/watt, filcker free (Ripple less than 5%) and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed of replacement warranty on fittings complete all as specified and directed.

M&L in replacement for sub main wiring with two runs of PVC insulated and unsheathed FRLS cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through PVC Casing Caping /conduit and 4 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed (Note : Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)

M&L in replacement for sub main wiring with two runs of PVC insulated and unsheathed FRLS cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 6 Sqmm single core, copper conductor drawn through PVC Casing Caping /conduit and 6 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed (Note : Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)

Supply and fixing in replacement of Sub main wiring with four runs of single core 10 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 Volts grade,FRLS drawn through existing PVC conduit/recessed steel on wall /surface with adequate size with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 10 Sqmm as earth wire (green in colour) run through concealed cunduct and connected to common earth dolly with necessary thimbels and lugs as required at site (Note : Four runs of conductor with one run of earth wire and PVC casing capping/conduit will be measured & paid as one unit)

Supply and fix in replacement industrial type sheet metal enclosures with socket plug top and MCBs for Geysers with 20 Amps MCB Make:- Iengard Cat No.5078 11 20 A SP complete or Eq in L & T /Hager

Supply and fix in replacement Ding Dong Door Bell for Home Make:- Anchor/Havells/Standard

Rewinding for Ceiling fan 1200 mm sweep of fan motor of following items with super enamelled copper insulated wire of suitable gauge and weight as per existing including insulation materials, varnishing, heating, including capacitor reassembling and testing painting to ceiling fans of any type and any sweep with two coats of synthetic enamelled paint in position by spraying/hand brushing neatly including preparation of old surface and writing MES No with black paint and refixing in position duly testing for smooth functioning. complete all as specified and as directed. complete all as specified and as directed by Engineer-in- Charge.

Ball bearing suitable for Ceiling fan 1200 mm sweep