Military Engineer Services Tender

Material and labour for waterproof cement based putty @ 1 Kg (undiluted ) per sq mtr. of average thickness 1mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1 - Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 - Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3- Allow 6-8 hrs time to dry the putty surface. Make of Manufacturer : ASIAN/ BERGER/ NEROLAC or equivalent make as mentioned in Appx 'B'. Note - 1. External plastering in CM 1:4 in patches (if required at site before application of above putty in certain portion area n ecx exc 0.5 Sqm) shall be done at no extra cost.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over wall surface at any height n exc 12 mtr complete all as specified and directed. Makes :- Nerolac, Asian, Burger, Dulux. Note- 1. Application of Primer and emulsion to be carried out through air less spray machine (Mechanical means) of paint application with a flow speed of min 1 Itr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. 2. The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manutacturer of which the materials .i.e. Paint, Distemper, Putty etc, is proposed to be used by the contractor and approved by Engineer in charge

M & L for preparing old plastered or unplastered surfaces of walls and concrete surface by Washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of Acrylic weather proof Exterior paint (Apex paint) at any height (not.exc 12 mtr) complete all as specified and directed.

M & L for preparing old plastered or unplastered surfaces of walls and concrete surface n exc 45 cm in width by Washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of Acrylic weather proof Exterior paint (Apex paint) at any height (not exc 12 mtr) complete all as specified and directed.

Clearing of shrubs growth and trees of girht n exc 50cm on bldgs wall, chajja, and making good the damaged portion in CM 1:3 (area n exc 2.0 sqm) and match the existing surface complete all as specified and as directed.

Demolition reinforced concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work etc complete all as specified and directed.

M&L for RCC nominal mix Type B-1 1:2:4 (20 mm graded aggregate) as in chajja, facia, other overhang portion and similar items complete all as specified and directed

M&L TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Use and waste for Formwork to sided and soffits of suspended slabs such as roof slabs, floor slabs, landings, chajja, facia and similar work; not exceeding 200mm thick (Horizontal or sloping) ccomplete all as specified and directed

Providing cement concrete in lintels upto 1.5m clear span, cills, steps, bands, plinth courses, parapets, copings, haunching and benching over chajjas and the similar work including weathering, slightly rounded or chamfered angles, throating and finishing surface with CM 1:3 even and smooth complete all as specified and directed

Note against Item No 01 to 13: (a)The prepatory and application work pertaining to prediocal services & Water Proofing shall be excuted from authorized applicator duly cerified by manufacturer of the Paint, Distemper, Putty etc. Before execution of work necessary approval shall be taken from AGE(I) with all documentary evidances. (b) Where the items executed upto 12 mtr height, necessary scaffolding, props, jacks, shuttering and ladder shall be provided by the contractor in his own arragement and the same is included in unit rates quoted. Green cloth shall be provided all around the work site for any position/height with all safety precaution (i.e. Safety Jacket, Safety Shoes , Safety Marks, Safety Halmet, Safety Safety harness, Safety Goggles etc) Without safety precaution this work not been commenced as decided by Engineer-in- Charge/ by AGE(I). NO extra cost shall be paid for such precaution. Such precaution shall be deemed to be included in the quoted rate. (c) Insurance for each worker shall be provided during currency of the work.same shall be deemed to be included in the quoted rate. (d) Masking/covering of window/doors during spray painting using polythine film shall be deemed to be included in the quoted rate. (e) No payment for additional height shall be paid to the contractor. (f) Cleaninng and clearing site of paint, mats etc. are deemed to be included in the quoted rate. (g) Completion of the work will not be issued without proper cleaning of site as per direction of AGE(I) or by the Engineer-In-Charge.

Total amount with taxes in Figures

Total amount with taxes in words