Military Engineer Services Tender

LT cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core, complete all as specified and directed.

LT cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core, complete all as specified and directed.

LT cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core, complete all as specified and directed.

LT cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core, complete all as specified and directed.

LT cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core, complete all as specified and directed.

Relaying and testing cable XLPE Insulated carefully old serviceable LT cable of following Size :-

LT cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core, complete all as specified and directed.

LT cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core, complete all as specified and directed.

LT cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core, complete all as specified and directed.

LT cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core, complete all as specified and directed.

LT cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 300 sq mm 3.5, corecomplete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 240 sq mm 3.5, corecomplete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core, complete all as specified and directed. (for Street Light)

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core, complete all as specified and directed. (for Street Light)

Excavation in trenches in soft/ loose soil n.exc 1.5 m wide and n.exc. 1.5 mtr deep and getting out and laying LT UG cable, complete all as specified and directed .

Returning filling in with the soil obtained from item above here-in-before includiing spreading , leveling and well ramming in layers n.exc 25 cm thick, complete all as specified and directed.

Removal of surplus excavated soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc.1.5 mtr above starting point, complete all as specified and directed

Supplying and laying un-reinforced precast concrete cable cover, class HVP,type 1 with peak, size 300mm x 180mm x 40mm to cover/laid over the cable in cross direction to give mechanical protection to under ground cable, complete all as specified and directed.

M&L for sand cushioning in trenches for protection of under ground cable provided in layers of sand as 8 cm before laying the cable and 15 cm deep after laying cable, complete all as specified and directed.

M&L for boring holes 2 m under road horizontely of size 80 mm bore of GI pipe for passing of cable in road in hard/soft/ loose soil deep for under-reamed piles and getting out and disposal of a distance of n exc 50 m, complete all as specified and directed.

M&L for GI tubing 'light grade' 80 mm bore with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete for following sizes :-

M&L for Earthing complete with galvanized steel earth plate electrode of 60 cm X 60 cm X 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized strip of size 32 mm X 6 mm as earth lead by means of bolts, nuts, checknuts and washers of galvanized iron or steel, galvanized iron protection pipe of 40 mm diameter (light grade) connected to earthing test point, all as shown in electrical plate No. 03, including testing on completion, excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep with a 10 mm deep CI cover hinged to CI frame on ground level, GI watering pipe, (medium grade) 20mm dia funnel, etc. complete all as specified and directed by Engineer- in - Charge.

M&L for Earthing complete with galvanized steel earth plate electrode of 60 cm X 60 cm X 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, galvanised earth lead wire 4.0mm dia by means of bolts, nuts, checknuts and washers of galvanized iron or steel, galvanized iron protection pipe of 20 mm diameter (light grade) connected to earthing test point, all as shown in electrical plate No. 03, connected to earthing test point including testing on completion, excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep with a 10 mm deep CI cover hinged to CI frame on ground level, GI watering pipe, (medium grade) 20mm dia funnel, etc. all as specified and directed by Engineer- in - Charge.

Supply, fixing ( in replacement ), connecting to electrical system & testing of CPRI Approved ) LT Panel, cubical types, for out door use, made out of 3.15 mm thick CRCA sheet factory made, totally supported with 4 Nos MS Angle legs , duly painted with two coats of powder coated paint over one coat of red oxide primer effectively PVC gasket & sealed and mounted on PCC blocks double door type with locking arragnedment with handle at front and openable at front & back both side with required hinges heavy duty, compartemtalised suitably including provision for tapping incoming & outgoing electric connections with suitable size of aluminium lugs glands and comprising of the following accessories :- (a) High conductivity aluminium busbar (Set of 4 strips), 4 Nos TPN of 600 amps rating (RYB) for phase and 1 No for neutral mounted on DMC support with heat shrink sleeve-1 Set. , (b) Phase indication lamp, LED type (Set of 3) (c) MCCB 4 Pole 400 Amp 415 volt with Microprocessor release, 36 KA breaking capacity as incomer:- 01 No (d) MCCB 4 pole 250Amp 25 KA breaking capacity as outgoing cotrol device : 02 Nos. (e) MCCB 4 pole 160 Amp 25 KA breaking capacity as outgoing cotrol device 02 Nos. (f) MCCB 4 pole 125 Amp 25 KA breaking capacity as outgoing cotrol device : 01 No. (For S/B LT Panels (A,B,C,D,E,F) Note :- Cost of PCC foundation and earth work are deemed to be included in quoted rate.

Supply, fixing ( in replacement ), connecting to electrical system & testing of CPRI Approved ) LT Panel, cubical types, for out door use, made out of 3.15 mm thick CRCA sheet factory made, totally supported with 4 Nos MS Angle legs , duly painted with two coats of powder coated paint over one coat of red oxide primer effectively PVC gasket & sealed and mounted on PCC blocks double door type with locking arragnedment with handle at front and openable at front & back both side with required hinges heavy duty, compartemtalised suitably including provision for tapping incoming & outgoing electric connections with suitable size of aluminium lugs glands and comprising of the following accessories :- (a) High conductivity aluminium busbar (Set of 4 strips), 4 Nos TPN of 400 amps rating (RYB) for phase and 1 No for neutral mounted on DMC support with heat shrink sleeve-1 Set. , (b) Phase indication lamp, LED type (set of 3) (c) MCCB 4 Pole 250 Amp 415 volt ,36 KA breaking capacity as incomer :- 01 Nos (d) MCCB 4 pole 160Amp 25 KA breaking capacity as outgoing cotrol device : 02 Nos. (e) MCCB 4 pole 100 Amp 25 KA breaking capacity as outgoing cotrol device : 02 Nos. (f) MCB 4 pole TPN 100 Amp 16 KA breaking capacity as outgoing cotrol device : 01 Nos. (For Non stadby supply panel A1,A2,A3,A4,A5) Note :- Cost of PCC foundation and earth work are deemed to be included in quoted rate.

Supply, fixing & testing of LT distribution panel board CPRI Approved made out of 3.15 mm thick MS sheet factory made duly painted with two coats of synthetic enamelled paint over one coat of red oxide primer double door type, compartmentalised and provision for tapping incoming & outgoing electric connections with suitable size of lugs, glands, one MCCB/MCB will be mounted on proper din railes and comprising of the followings :- (a) MCB 100 Amps 4 pole TPN - 01 No. (b) 32 Amps 3pole contactor :- 01 No. (c) Timer switch for 24 hours operation -01 No. (d) Bypass arrangement by way of toggle switch - 01 No. (e) 32 Amps TP MCB on din channel - 03 Nos. (e) Neutral Link and connector - 01 No (Note :-Cost of PCC foundation and earth work are deemed to be included in quoted rate.) Make of MCCB/MCB : Schneider/L&T/Legrand) (For Street light panels). Note :-Cost of PCC foundation and earth work are deemed to be included in quoted rate.

Dismantling & taking out old steel tubular pole 9/11 mtr long carefully from foundation for re-use, shifting and re-fixing/re-erecting at other location within New cantt area including necessary excavation and pcc work complete including following :-

(a) Excavation in post hole not exceeding 1.5 Mtr wide & 2 Mtr deep for pole foundation & getting out in soft loose soil, returning, filling in the excavated soil after fixing the pole in foundation, ramming earth around in layers n.exc 25 cm thick and disposal of surplus soil to a distance n.exc 50 metres. (b) M&L for Providing PCC 1:4:8, type D2 ( using 40 mm graded stone aggregate) in foundation 600mm x 600mm x 1500 mm (planting depth) for concrete encasing the pole upto GL all as specified and directed. (c) M&L for Providing PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) for plinth block /Collar above GL, 300 mm high and 450 mm dia

(d) M&L for Painting of pole externally with one coats of black bituminous paint (upto planting depth) and above plinth block/ concrete collar with two coats of aluminium paint over a coat of red oxide primer including preparation of surfaces including painting of 30 cm wide black bands 3 Nos with synthetic enamel paint in alternate layers upto the height of 1.5 Mtr above plinth block. (e) M&L for writing letter or figures (Block, roman, itallic or indian) with thick synthetic enamel paint of approved shade exc. 5cm height in numbering of poles all as directed by EIC.

S&F steel tubular electric pole, for street light, welded ( 9 metre long) complete with CI base plate, bolts, nuts & screws all as specified including the following:- (a) Excavation in post hole not exceeding 1.5 Mtr wide & 2 Mtr deep for pole foundation & getting out in soft loose soil, returning, filling in the excavated soil after fixing the pole in foundation, ramming earth around in layers n.exc 25 cm thick and disposal of surplus soil to a distance n.exc 50 metres. (b) M&L for Providing PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) in foundation 600mm x 600mm x 1500 mm (planting depth) for concrete encasing the pole upto GL

(c) M&L for Providing PCC 1:3:6, type C2 (using 20 mm graded stone aggregate) for plinth block /Collar above GL, 300 mm high and 450 mm dia (d) M&L for painting of pole externally with one coats of black bituminous paint (upto planting depth) and above plinth block/ concrete collar with two coats of aluminium paint over a coat of red oxide primer including preparation of surfaces including painting of 30 cm wide black bands 3 Nos with synthetic enamel paint in alternate layers upto the height of 1.5 Mtr above plinth block.

S&F( in replacement) Pole box three phase of size 250x 200 x 100 mm made out of 2 mm PVC sheet factory made with inbuilt locking arrangement, out door type , fix to pole with suitable MS clamp comprising of alluminium busbar 16 Amp 04 Nos fixe on epoxy insulated pole and MCB 6 Amp 10 kA 240 volt on suitable Din rail complete all as specified and directed. Make :- Hensal/Havells/Sintex or equivalent make as specified in PS.

Taking down old and Dismantling rusted LT Panels any configuration any type and size carefully for disconecting the LT cables tapping incoming & outgoing electric connections with suitable size of lugs, glands, one MCCB/MCB etc (Old MCCB & MCB any type deposit to AGE E/M store), complete all as specified and directed.

Dismantling of ACSR or AAC and any type conductors complete all as specified and directed by Engr-in-Charge.

Dismantling insulators any type, any size complete all as specified and directed by Engr-in-Charge.

Dismantling stay assembly complete all as specified and directed by Engr-in-Charge.

Dismantling cross arms of MS channel or angle section etc complete all as specified and directed by Engr-in-Charge.