Lucknow Development Authority Tender

Providing and laying cement concrete 1:4:8 (1 cement :4coarse sand :8 graded stone ballast 20 mm. nominal size) including supply of all materials. Labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in founfation and floors. (PWD SI. NO.(281/18).

R.C.C work with cement approved coarse sand and 2 cm.("3/4") gauge approved stone ballast in the proportion of 1:1.5:3 Tee Beam, slab, roofs & RCC Coloumn excluding supply of reinforcement and its binding but including its fixing and binding wire and including necessary centering and shuttering etc. and also including supply od all materials, labour and T & P etc. required for proper completion odf the work. Binding wire cost being included in the item. (PWD SI. NO289/18)

Mild steel or iron work in Plane such as reinforced concrete or reinforced brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage & over lapping & hooks. (PWD SI. NO504/18)

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Km from the site of work & including watering, ramming, dressing etc. rate include cost of all materials, labour and T & P etc. required for proper completion of work.(PWD SI. NO255+c-1M11/18)

Supply & fixing of PVC pipe 160 mm for water recharge etc complete in all respect. (PWD /18-m)

Dismantling reinforcement cement concrete or reinforcement brick work including stacking of dismantled materials as directed by Engineer-in- charge with in a distance of 60 mt. (200 feet) (PWD SI. NO694/18)

First Class brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work. (PWD SI. NO305(B)/18)

12 mm . Thick plaster with cement and approved coarse sand in 1:3. (PWD SI. NO584/18)

Supply and fixing of 2 metres high cage fabricated with 3 mm thick expanded metal fixed on 50 mm x 50 mm x 6 mm angle iron frame having vertical members spaced at 1 to 1.25 mts and horizontal members spaced at 1 mt. The vertical members shall be grouted in floor and horizontal members in the wall to a depth of 300mm with ends forked. The cage shall have 200mm x 1000mm size one leaf foor with locking device having door frame fabricated with 35mm x 35mm x 6mm angle iron and 3 mm expanded metal duly fixed with the cage member with hinges etc. The cage shall be painted with red oxide primer and synthetic enamel paint. The job includes all materials, labour, T&P etc. for proper completion of work. (PWD SI. NO1142/18)

Steel Work in built up tubular (rounf, square or rectangular hollow tubes etc) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welfing and bolted with special shaped washers etc. complete. Hot finished welded type tubes. LDA-C-10(7)/18

Providing and fixing precoated galvanished iron profile sheets ( size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50mm(+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, IN 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transporation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DSR 12.50/18)

2.5cm Thick 1:2:4 plain cement concerete floor with cement approved coarse and 2 cm graded approved stone laid in panels finished with 3 mm flooring coat of cement or cement and marble dust in 5:1 as specified over & including 8 cm thick base concerete conisting of cement , local sand and brick ballast 4 cm.guage in the proportion of 1:4:8 and removing any overlaping mortar at the point of panels if any and giving them a uniform finished including supply of all materials , labours, T&Petc. required for proper completion of work. (PWD SI. NO360/18)

Finishing walls with water proof cements paint of approvement make and quality on new work with two coat to give an even shafe. Including supply of all materials , labours, T&Petc. required for proper completion of work. (PWD SI. NO660-661/18)

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB'S ( Four pole 36 KA with thermal magnatic release) Switches Complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltaage, current & parameters (KVA, P.F, KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic aluminium busbars as per IS 8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB'S shall be complete with suitable cable end boxes comparison glands and indicating lamp on incoming etc. The job includes the grounting of the board as per directions of Rngineer-in- charge. All out goings of 100 Amp and above shall have4 an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. with Incoming 400 Amp. MCCB-1 Nos. and outgoing - 315 amp-1 No, 200 amp-1 No, 100 amp 1No, 63 amp-1 No. only CAT. B. Pannel cubicle Type. (PWD SI. NO 813 (a ii /18)

Supply and laying of Aluminium conductor PVC insualted armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground lever over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top . On Surface the cable run shall be fixed on M.S clamps etc. of suitable size or as directed by the Engineer-incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (PWD SI. NO506(f)/18)

300 x 3/1/2

70 x 3/1/2

35 x 3/1/2

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the E/I. (PWD SI. NO504/18)

300 sq. mm2

70 sq. mm2

35 sq. mm2

S/L of DWC HD PE pipe ISI marked along with all accessories like socket,bend coupler etc complete with fitting & cutting jointing etc. Direct in ground (75 CM below). Including excavation & rifilling etc complete. (DSR14.16.1.4/18)

160 mm dia(OD-160mm & ID-135mm)

63mm dia(OD-63mm & ID-51mm)

S/F of Heavy Duty Double break HRC fuse type Metal clad TPN complete with HRC fuse etc. an Angle Iron frame. Of following size.etc complete in all respect.

320 Amp 415 v (348/18)

200 Amp 415 v (347/18)

100 Amp 415 v (346/18)

Drilling for cable laying trunchle method etc complete as per E/I. (DSR )

Supply and fixing of LED Tube light with Metal heavy duty box type batten light fixing 1 x 22 watt led Polycarbonated tubelight complete including tube suitable for both surface & Suspended complete in all respect CAT-AA (2200 system lumens 100 Im/watt PFPF0.95. THD10 % CRI80 Tube with aluminium heat with three year warrantee PWD 1413/18

S/F of Wall for 400 mm complete in all respect Make Heavell's or equivalent.

S/F of Exhaust for 450 mm Heavy duty 900 rpm. Make heavell's of equivalent.

Deduction due to Cable laying in G.I/M.S or hume pipe etc.