Indian Oil Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Indian Oil Corporation Limited - IOCL Tender
Civil And Construction
Energy, Oil and Gas
Electrical and Electronics
Pipe Line Project
Electrical Works
Eprocure
Opening Date16 Oct 2024
Closing Soon25 Nov 2024
Tender Amount₹ 39,17,24,498.57
Costs
EMD
₹ 9,81,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PLHO_181243_1Tender No
PLCC/KGPL/CL/24093Tender Authority
Indian Oil Corporation Limited ViewPurchaser Address
-Website
http://https://www.iocl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Bidders_help_Document_for_Preferencial_ Bidding_20230207_v1
Special_Instructions_to_the_Bidders_20230207_version_1a
BOQ Items
10.75" OD
70
-
1976533.75
12.75" OD
60
-
2383098.97
NITROGEN PURGING (OPTIONAL): Carrying out Nitrogen Purging of the pipeline system as per specification and direction of Engineer-in-Charge including supply of all labour, materials, equipments, instruments, pigs, barrels etc. complete in all respects.
-
-
-
10.75" OD
70
-
1549224.95
12.75" OD
60
-
1867791.08
ELECTRONIC GEOMETRY PIGGING (EGP) / CALLIPER SURVEY: Mobilisation/ demobilisation of pigging tools, tackles, consumables, accessories and personnel by contractor at work site including magnetic pig, electronic geometry pig, pig tracking device, preparation and cleaning of the complete mainline / Mainline sections including HDD sections under this tender (but excluding HDD crossings not included under the scope of this tender and to be executed by separate agency) by running series of pigs for cleaning the line from debris, water & making it dry for launching calliper pigs, running of magnetic pig for cleaning of ferrous residue, launching and receiving the electronic & standard calliper pigs, including pig tracking at 5 to 10 km interval, data retrieval, interpretation of data and submission of reports in the form acceptable to the Owner, including rectification of defects observed from calliper survey, including supply of all labour, materials, equipment & instruments, calliper pigs, fabrication of launching & receiving barrels, all complete for ascertaining the geometry of the pipeline.
-
-
-
10.75" OD
70
-
2020929.6
12.75" OD
60
-
2054887.16
INSTALLATION OF SECTIONALISING VALVES: Taking delivery of MOVs for mainline from Owner's stockpile/ godown, preparation of pup pieces of specified length from owner supplied pipes of higher wall thickness, welding of pup pieces to both sides of valves, providing instrument tappings in MOVs, hydrostatically testing the valves & installing at designated locations on the mainline in accordance with the specifications and drawings, welding & 100% radiography of weld joints, repair of weld joints etc., complete in all respect including all works and material in foundation, RCC underground valve supports etc., including PU Coating of underground portions and painting of overground portions / valve enclosure etc. with aluminium paint over a coat of primer, and including supply of all materials (other than those specifically undertaken to be supplied by the Owner), consumables & inputs complete as per specifications, drawings & instructions of Site Engineer / Engineer-in-Charge.
-
-
-
10.75" OD
5
-
520526.56
12.75" OD
5
-
617377.89
COMMISSIONING ASSISTANCE FOR LPG PIPELINE: Supply of all materials, consumables, providing all equipment & resources for the complete activity of commissioning of Liquid Petroleum Gas Pipeline (LPG) including Mainline and Stations with proper pressurization of mainline and station piping with Nitrogen, batch pigging followed by vaporized LPG and effective line fill by pressurization of line fill LPG as per approved procedure and Specification requirement including providing expert services for vetting of commissioning procedure and presence of expert to guide & monitor the complete commissioning activities, providing all supervisory/expert services, other manpower and all resources for the execution of the complete service meeting with international practices and standards, observing all statutory and other governing rules & standards in all respect and as per the approved scheme and guidance/direction of Engineer - in - Charge. i) The offer shall be inclusive of supply of nitrogen, pig train, all consumables, taxes, duties as applicable and excluding GST. ii) IOCL's responsibility shall be limited to arrangement of a) Fire tender b) Ambulance c) Water supply d) Providing LPG in tanker truck and subsequently lining up of the pipeline system for LPG line fill.
-
-
-
10.75" OD
70
-
794498.01
12.75" OD
60
-
807050.62
Civil Works - ITC
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in widt h as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by the Engineer-in-Charge.
-
-
-
All kinds of soil
796.52
-
121443.65
Extra for every additional lift of 1.5 m or part thereof in excavation/ banking excavated or stacked materials.
-
-
-
All kinds of soil
25.09
-
1571.5
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
18.28
-
20308.75
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:3:6 (1 cement : 3 coarse sand (Zone-III) : 6 graded stone aggregate 20 mm nominal size)
10.86
-
64773.56
1:4:8 (1 cement : 4 coarse sand (Zone-III) : 8 graded stone aggregate 40 mm nominal size)
42.2
-
228768.8
Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm down size) mixed with approved brand of water proofing compound @ 1Kg/50 Kg bag of cement, in roof grading, coping, in bed concrete etc. at all heights & depths, including providing centering and shuttering, scaffolding, watering, curing, vibrating, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer.
1.35
-
11801.88
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishi ng and reinforcement - All work up to plinth level :
-
-
-
1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III): 3 graded stone aggregate 20 mm nominal size)
438.67
-
3300573.17
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
2833.98
-
665374.86
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto pli nth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more
50059.83
-
3429639
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in :
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
16.76
-
96406.16
Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, cl addings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cut ting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. including pre paration of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supplying & applying painting with two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of "EPILUX 610" Primer of M/s BERGER or any other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of conc rete work).
15.39
-
1986693.01
Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class designation 50 la id to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labo ur, materials, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer.
77.92
-
53787.26
15 mm cement plaster on rough side of single or half brick wall of mix :
-
-
-
1:6 (1 cement : 6 coarse sand)
76.27
-
17967.32
6 mm cement plaster of mix :
-
-
-
1:3 (1 cement : 3 fine sand)
1086
-
189043.93
Neat cement punning.
33.75
-
1740.35
Supplying and providing non-shrinkable cement grout (SHRINKKOMP 20 or any other equivalent approved brand) for grouting holding down bolts in pocket holes for equipment foundation, including necessary surface preparation mixing of grout, curing as per manufacturer 's recommendation/ specification and direction of the Site Engineer. (Note: This item shall be operated under specific instruction o f the Engineer-in-Charge.)
18178
-
1302231.93
Civil Works - Non ITC
-
-
-
Earthwork in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including gettin g out and disposal of excavated earth up to 50m lead and lift up to 1.5 m, as directed by the Engineer-in-Charge :
-
-
-
All kinds of soil
23687.21
-
1519690.86
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in widt h as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by the Engineer-in-Charge.
-
-
-
All kinds of soil
8953.32
-
1365093
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in d epth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
9709.46
-
1478088.57
Extra for every additional lift of 1.5 m or part thereof in excavation/ banking excavated or stacked materials.
-
-
-
All kinds of soil
878.24
-
55008.04
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
2684.53
-
2982463.97
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
-
-
-
Beyond 30 cm girth upto and including 60 cm girth
77
-
20430.78
Beyond 60 cm girth upto and including 120 cm girth
82
-
96554.87
Beyond 120 cm girth upto and including 240 cm girth
67
-
365328.35
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
1570.45
-
353521.8
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
Along the external wall where apron is not provided using chemical emulsion @ 7.5 litres/ sqm of the vertical surface of the substru cture to a depth of 300 mm including excavation channel along the wall & rodding etc. complete:
-
-
-
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
1364
-
27732.03
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling an d plugging holes etc.:
-
-
-
"Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diamete r holes and plugging with cement mortar 1 : 2 (1 cement : 2 Coarse sand) to match the existing floor : "
-
-
-
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
2178.99
-
347910.18
Treatment of existing masonry using chemical emulsion @ 1 litre per hole at 300 mm interval including drilling holes at 45 degree an d plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole :
-
-
-
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
1227
-
28291.18
Filling the excavated earth to required grade, level & profile in low lying areas including watering, ramming, compacting at optimum moisture content to 90% of Proctor's density consolidation by rolling with 8 to 10 tonne power roller in layers not exceeding 20 c m thickness, including clearing the area by cutting of shrubs, bushes, grass, vegetation, debris etc. stacking and disposing out of plot area to an unobjectional area as directed by site Engineer complete in all respects inclusive of cost of all labour, materials , tools, tackles etc. as per drawings, specifications and direction of Site Engineer.
2697.39
-
486413.86
Supplying and filling selected earth/ moorum (excluding black cotton soil) from Contractor's own borrow areas including royalty, wit h all leads and lifts in low laying areas and filling to required grade and level including watering, compacting at optimum moisture content to 90% of Proctor's density, consolidation and rolling with 8 to 10 tonne power roller in layers not exceeding 20 cm thic kness, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer.
24238.47
-
11086758.59
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:2:4 (1 cement : 2 coarse sand (Zone-III) : 4 graded stone aggregate 20 mm nominal size)
756.65
-
5021300.1
1:3:6 (1 cement : 3 coarse sand (Zone-III) : 6 graded stone aggregate 20 mm nominal size)
347.06
-
2070010.29
1:3:6 (1 cement : 3 coarse sand (Zone-III) : 6 graded stone aggregate 40 mm nominal size)
275
-
1602783.38
1:4:8 (1 cement : 4 coarse sand (Zone-III) : 8 graded stone aggregate 40 mm nominal size)
290.04
-
1572324.71
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's sp ecification. (Note: Unit "EA" shall mean "Per 50 Kg of Cement")
66
-
3830.92
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal siz e) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
468
-
255140.4
Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm down size) mixed with approved brand of water proofing compound @ 1Kg/50 Kg bag of cement, in roof grading, coping, in bed concrete etc. at all heights & depths, including providing centering and shuttering, scaffolding, watering, curing, vibrating, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer.
72.54
-
634154.56
Providing and laying 40 mm thick CC 1:2:4 Damp Proof Course with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone ch ips 6 mm down size) laid to proper level & line including providing shuttering, applying two coats of bitumen applied @ 1.50 Kg/sqm and spreading an even layer of coarse sand over hot bitumen, etc. complete in all respects inclusive of cost of all labour, material s, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer.
177.89
-
118120.67
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishi ng and reinforcement - All work up to plinth level :
-
-
-
1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III): 3 graded stone aggregate 20 mm nominal size)
1579.14
-
11881521.68
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
28.01
-
195737.39
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fille ts, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering , shuttering, finishing and reinforcement :
-
-
-
1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III) : 3 graded stone aggregate 20 mm nominal size)
59.52
-
514873.39
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 Degree landings, balconies, shelves, chajjas , lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cos t of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III) : 3 graded stone aggreg ate 20 mm nominal size)
408.06
-
3650916
Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III) : 3 graded stone aggregate 20 mm nomina l size)
65
-
545127.61
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
1934.95
-
454296.46
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
4681.23
-
2145463.88
Shelves (Cast in situ)
30
-
15336.7
Lintels, beams, plinth beams, girders, bressumers and cantilevers
4153.25
-
1724064.74
Columns, Pillars, Piers, Abutments, Posts and Struts
2226.69
-
1261092.12
Stairs (excluding landings) except spiral-staircases
81
-
41119.47
Weather shade, Chajjas, corbels, etc. including edges.
629.02
-
397293.31
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto pli nth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more
277263.31
-
18995531.18
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above pl inth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500 D or more
119565.79
-
8191547.93
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in :
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
799.23
-
4597297.08
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to fl oor V level in all shapes and sizes in :
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
123.89
-
837294.14
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :
-
-
-
Cement mortar 1:3 (1 cement : 3 coarse sand)
834
-
623932.08
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level :
-
-
-
Cement mortar 1:3 (1 cement :3 coarse sand)
187
-
160430.85
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.
187
-
12868.89
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanit y counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick ba se cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, inc luding rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. :
-
-
-
Granite of any colour and shade :
-
-
-
Area of slab up to 0.50 sqm
53
-
215060.05
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar lo cation in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of c ut edges etc. complete.
18
-
9325
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75 x 50 cm deep and 1.8 cm thick, fixed in ur inal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or w ith cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of the Engineer-i n-Charge and finished smooth.
-
-
-
Granite Stone of approved shade
3
-
10284.69
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of t he building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement m ortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge . :
-
-
-
Polished granite stone slab- Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
294
-
1045537.09
Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) non-decorative type, core of block board construc tion with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face vene ers on both faces of shutters:
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
17
-
32098.81
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrange ments for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27. 5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 (Part-1) and M.S. top co ver of required thickness for rolling shutters.
-
-
-
80 x 1.25 mm M.S. laths with 1.25 mm thick top cover
140
-
392528.42
80 x 1.20 mm M.S. laths with 1.20 mm thick top cover
27
-
60186.09
Providing and fixing ball bearing for rolling shutters.
46
-
21121.43
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, to p lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. s heet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia. M.S. bar bent to sha pe as per standard drawing.
40
-
6299.78
Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, cl addings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cut ting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. including pre paration of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supplying & applying painting with two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of "EPILUX 610" Primer of M/s BERGER or any other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of conc rete work).
57.73
-
7452357.86
Supplying, fitting and fixing hot dip galvinised barbed line wire through holes in fencing posts (already made in the body of the po st), tightening and fixing the wire in tight condition with straining bolts (straining bolts at end post) including the cost of cutt ing and lapping joints, making holes, straining bolts, galvanised staples, binding wires etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Engineer-in-Charge.
8000
-
4557348.8
Supplying and placing in position 5.0 mm thick steel chequered plates over cable ducts, valve pits etc. including provision for lift ing arrangements complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifica tions and directions of the Engineer-in-Charge.
770
-
4197041.46
Supplying, fitting and fixing punched tape concertina spiral coil of 50 turns per coil having core wire of 2.6 mm diameter made of h igh carbon spring steel of high tensile strength as per IS:4454 (Part-I, Grade-II) having minimum galvanising coating thickness equi valent to 230 grams per square metre and low carbon steel strip of 0.5 mm thickness having a series of barbes punched all along the length on both sides of the strip at regular interval as per IS:513, DD quality having minimum galvanising coating thickness of 12 m icrons. Hardness of tape should be between 137-180 VPN (Victor Penetration Number). The coil should be clipped sufficiently at regul ar intervals. The coil should not be stretched for more than 6.0 m length and the minimum diameter of the coil in the closed conditi on should not be less than 600 mm complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per dr awings, specifications and directions of the Engineer-in-Charge.
2000
-
991223.6
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting m ortar bedding, and joints filled with acid and/or alkali resisting cement as per IS:4457, complete as per the direction of Engineer- in-Charge.
-
-
-
In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)
-
-
-
Acid and alkali resistant tile
247
-
320938.26
In dado/ skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)
-
-
-
Acid and alkali resistant tile
177
-
245036.64
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match t he shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
-
-
-
25 mm thick
1043
-
1462229.89
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cemen t: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and poli shing complete.
297
-
445175.32
Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey ce ment slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete.
528
-
476058.63
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of first quality conforming to IS:15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including pointing the joints with white cement and mat ching pigment, etc. complete.
191
-
159156.59
Providing and fixing first quality ceramic glazed floor tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirt ing, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slu rry @ 3.3 Kg/sq.m. including pointing in white cement mixed with pigment of matching shade complete.
35
-
27972.49
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 ce ment : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
Size of Tile 500x500 mm
340
-
406832.85
Size of Tile 600x600 mm
163
-
220879.41
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to IS:15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of c ement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joint with white cement & matching pigments etc. complete.
-
-
-
Size of Tile 500x500 mm
48
-
58353.36
Size of Tile 600x600 mm
45
-
61840.26
Providing and fixing removable raised/ false access flooring with system (Unitile Solid Feel (USF) 800 or equivalent) and its compon ents of approved make for different plenum height with possible height adjustment up to 50 mm, comprising of modular load bearing fl oor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of: (A) Providing at required spacing to form modular framework, pedes tals made out of G.I. tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75 mm x 75 mm x 3.5 mm welded with G.I. fully threaded stud 16 mm outer diameter with two G.I. Check nuts screwed on the stud for level adjustment up to 50 mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the sub-floor (base) through base plate using epox y based adhesive of approved make or the machine screw with rawl plug. (B) Stringers system in all steel construction hot dipped gal vanized of rectangular size 570x20x30x0.80 mm thick having holes at both ends for securing the stringers on to the pedestal head usi ng fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel. The system shall pro vide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-Charge. (C) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange) . The panel should be corrosion resistant epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip non-combustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology up to 1 mm thickness for superior adhesion and Sur face flatness within 0.75 mm.The panel is to withstand a Concentrated Load of 363 Kg applied on area 25 mm x 25 mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minim um 1250 Kg/sq.m. and, an impact load of 50 Kg all complete as per the approved manufacturers specification and as per the direction of the Engineer-in-Charge. All specification must be printed on the side of the panel to ensure the quality of the product.
-
-
-
450 mm Finished Floor Height (FFH)
133
-
688357.67
Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class designation 50 la id to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labo ur, materials, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer.
10177.69
-
7025539.31
Providing and fixing 2 mm thick P.V.C. (BHOR or equivalent make) sheet/ tile flooring on a smooth and damp proof base using rubber b ased adhesives including rolling with light wooden roller weighing about 5 Kg, all complete including cost of preparation of subgra de, damp proof course consisting of 30 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm n ominal size) as directed by the Engineer-in-Charge.
188
-
321741.21
Providing and laying 52 mm thick cement concrete flooring with metallic hardner, under layer of 37 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer of 15 mm thick metallic concrete hardner consis ting of mix 1:2 (1 cement : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compound such as IRONITE NO . 1 of IRONITE CO. OF INDIA LTD. or aproved equivalent mixed in the ratio 4:1 (4 parts of cement : 1 part of metallic floor hardenin g compound of approval quality) by weight, inclusive of cost of finishing, labour, material, equipment, etc. as per specifications a nd directions of the Engineer-in-Charge.
293
-
319826.79
Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat :
-
-
-
With common burnt clay F.P.S. (Non Modular) brick tiles of Class Designation 10
140
-
72314.65
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including fini shing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
-
-
-
In 75x75 mm deep chase
670.44
-
124174.07
Making Khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggr egate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse s and) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
65
-
14760.91
Providing and fixing on wall face Unplasticised Rigid PVC (UPVC) rainwater pipes conforming to IS:13592 Type-A, including jointing w ith seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion: (i) Single socketed pipes :
-
-
-
110 mm diameter
990
-
283241.77
Providing and fixing on wall face Unplasticised-PVC (UPVC) moulded fittings/ accessories for Un-plasticised Rigid PVC rainwater pipe s conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion :
-
-
-
Coupler :
-
-
-
110 mm
130
-
16153.02
Single Push-fit Coupler :
-
-
-
110 mm
130
-
14879.8
Bend 87.5 Degrees :
-
-
-
110 mm Bend
105
-
14374.88
Shoe (Plain) :
-
-
-
110 mm Shoe
105
-
12455.67
Providing and fixing Unplasticised-PVC (UPVC) pipe clips of approved design to unplasticised-PVC rainwater pipes by means of 50x50x5 0 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 c ement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
110 mm
75
-
16468.97
Providing and fixing LUXALON 75C & 225C un-perforated Aluminium panel coloured ceiling manufactured by M/s. HUNTER DOUGLAS INDIA or any other approved equivalent brand, each panel consisting of 75/225 mm wide x 15.5 mm deep and 0.5 mm thick with bevel edged panel made from enamelled corrosion resistance aluminium alloy AA-5050 (Al.Mg), each panel to abut each other with a narrow 'V' groove, cl ipping with a baked enamelled aluminium panel carrier of 32 mm wide x 39 mm deep x 0.95 mm thick in standard length of 5 metres made of double baked enamelled aluminium alloy AA-5050 (Al.Mg) black with cutouts to hold the panels in a module of 75 mm closed at a di stance of 1.25 metre, each panel carrier suspended by means of G.I. suspension rod 4 mm diameter and a galvanised supsension spring clip at a distance of 1.7 metre centre to centre, making openings for light fittings etc. with suitable peimeter framing all complet e as per manufacturer's recommendation and directions of the Engineer-in-Charge. (Note: Measurement shall be made wall to wall witho ut any deduction for openings, for payment purpose).
552
-
3590237.7
Extra over above item for providing perforated panels with non-woven tissue glued to panels.
599
-
2094618.66
Providing and laying 20 mm thick pre-cast cement concrete tiles of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregates 1 2.5 mm nominal thickness) grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compund by w eight of cement over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) finished neat etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
2503
-
4062417.06
15 mm cement plaster on the rough side of single or half brick wall of mix :
-
-
-
1:6 (1 cement : 6 fine sand)
5811.25
-
1302882.25
15 mm cement plaster on rough side of single or half brick wall of mix :
-
-
-
1:6 (1 cement : 6 coarse sand)
6516.14
-
1535040.98
6 mm cement plaster of mix :
-
-
-
1:3 (1 cement : 3 fine sand)
18635.03
-
3243866.76
Neat cement punning.
1.25
-
64.46
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
-
-
-
Water thinnable cement primer
12955
-
579526.38
Finishing walls with water proofing cement paint of required shade :
-
-
-
New work (Two or more coats applied @ 3.84 Kg/10 sqm)
16773
-
1193861.88
Finishing walls with textured exterior paint of required shade :
-
-
-
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
10738
-
1958278.32
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
-
-
-
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
150
-
20390.4
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wa ll surface to prepare the surface even and smooth complete.
12955
-
1369859.11
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approv ed brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
-
-
-
Two coats
7187
-
431920.01
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 gra ms/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
-
-
-
Two coats
5768
-
495698.46
Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand a nd manufacture, including applying additional coats wherever required to achieve even shade and colour.
-
-
-
Two coats
100
-
9078.92
Providing grooves of uniform size 12x12 mm and up to 15x15 mm in plaster as per approved pattern using wooden battens, nail to the u nder layer including removal of wooden battens repair to the edges of panels and finishing the groove complete as per directions of the Engineer-in-Charge.
1956
-
151848.58
Providing & fixing galvanized chicken wire net 20 Gauge, 20 mm mesh size in plastering work at the junction of RCC Columns/ Beams & brickwork as directed by the Engineer-in-Charge.
761.32
-
180929.22
Providing and laying Burnt Terracota Tiles 12 mm thick for facia, over walls, sloping RCC Roofs etc. at all levels and locations lai d over and including a backing coat of 15 mm thick cement mortar (1 cement : 3 sand) and joints filled with coloured cement of same colour as tiles complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per specifications and d irections of the Engineer-in-Charge.
345
-
650997.68
Providing and fixing 12 mm thick Elevational Brick Tiles for facia, vertical face of walls, etc. at all levels and locations laid ov er and including a backing coat of 15 mm thick cement mortar (1 cement : 3 sand) and joints filled with coloured cement of same colo ur as tiles complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per specification and direct ions of the Engineer-in-Charge.
253
-
362281.28
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of t he Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtai ned. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations.]
-
-
-
Nominal concrete 1:3:6 or richer mix (including equivalent design mix)
67.99
-
82062.22
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of the Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior p ermission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations. (3) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge.]
67.62
-
119065.82
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materi al within 50 metres lead as per direction of the Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations.]
-
-
-
In cement mortar
31.4
-
32034.05
Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations . (3) Cutting of steel shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge.]
400
-
769.36
Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilo metre, as per direction of the Engineer-in-Charge.
160
-
39606.46
Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, tr ansporting, unloading to approved municipal dumping ground or as approved by the Engineer-in-Charge, beyond 50 m initial lead, for a ll leads including all lifts involved.
340
-
49612.39
Preparation and consolidation of sub-grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the s ub grade and disposal of surplus earth with lead up to 50 metres.
7425
-
809825.45
Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including prepari ng the surface & cleaning with mechanical broom.:
-
-
-
With medium setting bitumen emulsion :
-
-
-
On W.B.M/ W.M.M. @ 0.4 Kg/sqm
4950
-
79087.14
Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with bitumen o f suitable penetration grade, including required key aggregate as specified, spreading coarse aggregate with the help of self propel led/ tipper tail mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate spreader complete, including consolidation with road roller of minimum 8 to 10 tonne capacity to achieve specifie d values of compaction and surface accuracy :
-
-
-
For 50 mm compacted thickness using coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm gra ded @ 0.15 cum per 10 sqm with paving asphalt grade VG-10 @ 50 kg/10 sqm.
4950
-
2049606.9
Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set sprayin g using 98 kg of bitumen of grade VG-10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size (Passing 11.2 mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface, including rolling and finishing with power road roller all complete. (No te: This item to be operated only with the prior approval of the Engineer-in-Charge.)
4950
-
478494.72
Providing and laying design mix cement concrete of M-30 grade in roads/ taxi tracks/ runways, using cement content as per design mix , using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design c riteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by usin g needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per di rection of the Engineer-in-Charge. [Notes: (1) Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separate ly. (2) Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separa tely].
-
-
-
Cement concrete prepared with batch mixing machine
338
-
2820504.75
Providing and fixing in position pre-moulded joint filler in expansion joints. (Note: Unit "CM" shall mean "PER CENTIMETRE DEPTH PER CENTIMETRE WIDTH PER METRE LENGTH").
5119
-
13590.95
Providing and laying in position bitumen hot sealing compound for expansion joints etc. :
-
-
-
Using Grade 'A' sealing compound. (Note: Unit "CM" shall mean "PER CENTIMETRE DEPTH PER CENTIMETRE WIDTH PER METRE LENGTH").
563
-
1494.76
Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS :164, on bituminous surface in white/ yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign mate rial etc. complete.:
-
-
-
New work (Two or more coats)
299
-
48174.04
Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic materi al by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank hea ter and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the ro ad surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of the Engineer-in-Charge and accorda nce with applicable specifications.
113
-
53518.68
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wi re or nuts, bolts and washers as required complete as per the direction of the Engineer-in-Charge.
-
-
-
Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade.
1230
-
885426.57
Construction of granular sub-base by providing close graded material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thicknes s with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per s pecifications and directions of the Engineer-in-Charge.
-
-
-
With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
968
-
2448756.96
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specific ation including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfin isher in sub-base/ base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of the Engineer-in-Charge.
1238
-
3195543.67
Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into th e sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction o f the Engineer-in-Charge.
-
-
-
60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern.
9025
-
8261030.14
Supplying & fixing in position pre-cast cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate) kerb stone of size 450 mm high, 150 mm average thick & 600 mm long, each stone joined with 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) over a base of cement mortar, including excavation, bed concrete 300 wide & 100 thick in cement concrete 1:3:6 concrete, painting of expos d surfaces etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and d irection of Site Engineer.
3480
-
3711364.32
Supplying and fixing Road Hump of minimum size 350 mm width x 50 mm thick made of Carbon Black mixed Rubber with Additive of LDPE fo r reinforcement & UV resistant colouring agent of black & yellow colour with 4 reflective glass beads, of weight not less than 16 Kg /metre, and capacity to withstand minimum 35 tonne weight (moving vehicle load) including cleaning the road surface of all dirt, sca les, oil, grease and foreign material etc. and fixing the hump on the Road top as per manufactures specifications with necessary fas teners complete in all respects inclusive of cost of all labour, materials, fasteners, tools, tackles etc. as per specification and direction of the Engineer-in-Charge.
176
-
497316.76
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid.
10
-
41385.31
Providing and fixing white vitreous china pedestal type water closet (European type) (Ref. Make: HINDWARE, Model: Cat No.-20058 or e quivalent approved) with seat and lid, 10 litre low level white vitreous china dual flushing cistern (Ref. Make: HINDWARE, Model: Ca t No.-21028 or equivalent approved) & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with spe cials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and bracket s, cutting and making good the walls and floors wherever required :
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
6
-
33366.06
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I cl amps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
One urinal basin with 5 litre white P.V.C. automatic flushing cistern
10
-
42298.75
Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern
3
-
19514.46
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includ ing painting of fittings and brackets, cutting and making good the walls wherever require :
-
-
-
White Vitreous China Wash basin size 550x400 mm (Ref. Make: HINDWARE, Model: Cat No.-10010 or equivalent approved) with a pair of 15 mm C.P. brass pillar taps
6
-
15218.88
White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap
20
-
43999.84
Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by the Engineer-in-Charge.
6
-
1850.71
Providing and fixing C.P. Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of the Engineer-in-Charge .
15
-
14438.6
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete :
-
-
-
Semi Rigid Pipe :
-
-
-
32 mm diameter
15
-
1372.81
Flexible Pipe :
-
-
-
32 mm diameter
20
-
1773.3
Providing and fixing 100 mm sand cast Iron grating for gully trap.
24
-
849.88
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board grou nd fixed to wooden cleats with C.P. brass screws and washers complete.
20
-
19803.47
Providing and fixing toilet paper holder :
-
-
-
C.P. Brass (Ref. Make: JAQUAR, Model: Cat. No.-1151 or approved equivalent).
16
-
7463.64
Providing and fixing soil, waste and vent pipes :
-
-
-
100 mm diameter
-
-
-
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS:3989
121
-
135001.35
Providing and fixing plain bend of required degree :
-
-
-
100 mm diameter :
-
-
-
Sand Cast Iron S&S as per IS:3989
27
-
10947.73
Providing and fixing double equal plain junction of required degree :
-
-
-
100x100x100x100 mm :
-
-
-
Sand Cast Iron S&S as per IS:3989
9
-
8141.93
Providing and fixing single equal plain junction of required degree :
-
-
-
100x100x100x100 mm :
-
-
-
Sand Cast Iron S&S as per IS:3989
9
-
6268.99
Providing and fixing collar :
-
-
-
100 mm :
-
-
-
Sand Cast Iron S&S as per IS:3989
9
-
3826.28
Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe :
-
-
-
100 mm diameter :
-
-
-
SS-304 grade coupling with EPDM rubber
36
-
15710.8
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter :
-
-
-
100 mm
37
-
2776.78
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :
-
-
-
100 mm diameter pipe
71
-
3493.63
Providing and fixing glazed vitreous China Oval wash basin of 560x410 mm size (Ref. Make: HINDWARE, Model: Cat No.-10017 or equivale nt approved) with M.S. or C.I. brackets painted white, C.P. brass chain with rubber plug, 32mm C.P. brass waste coupling of standard pattern, 32mm C.P. brass bottle trap and union, 32mm diameter C.P. pipes to wall flange etc. including cutting and making good the walls & floors wherever required, etc. complete in all respects inclusive of cost of all required fittings, fixtures, materials, lab our, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.
-
-
-
White Colour
9
-
67952.18
Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS-15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engi neer-in-Charge.
-
-
-
2025 (25 mm OD) pipe
50
-
16009.06
2532 (32 mm OD) pipe
50
-
21151.5
(Exposed on Wall)Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-In-Charge.
-
-
-
15 mm nominal outer dia pipes
50
-
8652.35
20 mm nominal outer dia pipes
74
-
16119.27
(Concealed Work)Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of the Engineer-In-Charge.
-
-
-
15 mm nominal outer dia pipes
150
-
44706.66
20 mm nominal outer dia pipes
248
-
85518.19
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refil ling & testing of joints complete as per direction of the Engineer-In-Charge.
-
-
-
20 mm nominal outer dia pipes
140
-
25302.03
40 mm nominal outer dia pipes
600
-
233257.68
75 mm nominal outer dia pipes
1522
-
2212892.11
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (co st of water meter and stop cock to be paid separately).
10
-
4209.06
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
25 mm nominal bore
20
-
10367.01
32 mm nominal bore
20
-
12123.79
40 mm nominal bore
3
-
2123.43
Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete :
-
-
-
20 mm nominal bore
15
-
5938.53
Providing and fixing Un-plasticised PVC (UPVC) connection pipe with brass unions:
-
-
-
45 cm length :
-
-
-
20 mm nominal bore
94
-
9432.64
Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Ref. Make: SINTEX or approved equivalent), I S:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but with out fittings and the base support for tank.
-
-
-
Circular Tank
3000
-
26302.2
Rectangular Tank
5000
-
43837
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms .
-
-
-
15 mm nominal bore
20
-
13444.45
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS-8931 :
-
-
-
15 mm nominal bore
6
-
3455.11
Providing and fixing 15mm diameter C.P. brass tap as per following with C.P. brass flange including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specificatio ns and directions of the Engineer-in-Charge. :
-
-
-
Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0021 or approved equivelent)
55
-
89069.41
Providing and fixing 15mm diameter C.P. brass angle valve as per following with C.P. copper connecting pipe 375mm long or as require d including nuts, washers, C.P. brass flange, etc. including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Ch arge.
-
-
-
Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 0053 or approved equivalent)
40
-
66926.77
Providing and fixing 15mm diameter C.P. brass stop cock with wall flange (Ref. Make: JAQUAR, Model: Cat. No. 0933 or approved equiva lent), male end with C.P. copper connecting pipe 375mm long or as required including nuts, washers, C.P. brass flange etc. including cutting & making good the walls wherever required complete in all respects inclusive of cost of all materials, labour, tools, tackl es etc. as per specifications and directions of the Engineer-in-Charge.
40
-
69267.89
Providing and fixing the following washroom fittings, complete in all respects; inclusive of cost of all materials, labour, tools, t ackles etc. as per specifications and directions of the Engineer-in-Charge. :
-
-
-
Stainless steel liquid soap container (spring loaded push type) with lid and brackets fixed to P.V.C. cleats with C.P. brass screws, etc.
35
-
77914.93
C.P. brass double coat hook (Ref. Make: JAQUAR, Model: Cat. No. 1161 or approved equivalent).
20
-
22691.16
Providing and fixing approved quality C.P. brass Towel Rail of 20mm diameter & 600mm long including C.P. brass brackets fixed with w ooden cleats and C.P. brass screws etc. complete.
6
-
8613.1
Providing and fixing C.P. brass Towel Ring 300mm diameter, fixed to P.V.C. cleats with C.P. brass screws, etc. complete.
6
-
8942.75
Providing & fixing 6mm thick, copper back finish, looking mirror of required size, made of float sheet glass of best quality & appro ved make, over 12mm thick marine board fixed to rawl plug with round head screws & washers including teakwood beading with melamine polish all around, complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications an d directions of the Engineer-in-Charge.
12
-
34939.8
Providing, laying and jointing glazed stoneware pipes Class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cem ent : 1 fine sand) including testing of joints etc. complete :
-
-
-
150 mm diameter
300
-
118770.54
200 mm diameter
150
-
76872.87
250 mm diameter
150
-
125746.11
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg a s per standard design :
-
-
-
100x100 mm size P-type :
-
-
-
With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5
49
-
95049.72
Providing and laying non-pressure NP-2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in t he proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
250 mm dia. R.C.C. pipe
200
-
116709.08
300 mm dia. R.C.C. pipe
200
-
125544.92
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cem ent mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete. :
-
-
-
For pipes 250 to 300 mm diameter
6
-
3366.19
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 Kg and weight of frame 15 Kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand (Zone-III) : 10 graded stone aggregate 40 mm nom inal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
-
-
-
Inside dimensions 455x610 mm and 45 cm deep for single pipeline :
-
-
-
With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5
10
-
57832.63
Inside dimensions 500x700 mm and 45 cm deep for pipeline with one or two inlets :
-
-
-
With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5
3
-
19853.28
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diam eter, 1.8 m long complete as per standard design. :
-
-
-
With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5
10
-
250362.72
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/ spigot jointed with stiff mixture of ceme nt mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. :
-
-
-
450 mm dia RCC pipes
138
-
323421.41
Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/ spigot jointed with stiff mixture of cemen t mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. :
-
-
-
600 mm dia RCC pipes
52
-
181526.2
Constructing brick masonry Septic Tank with brickwork in cement mortar 1:6 including R.C.C. 1:2:4 (1 cement : 2 sand : 4 graded coar se aggregate) top slab, C.I. cover all as per standard drawing, etc. complete in all respects inclusive of cost of all materials, la bour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
-
-
-
For 30 Users
2
-
307169.15
For 10 Users
7
-
946080.91
Constructing percolation pit of size 3.0m diameter and 2.0m deep, filled with 40 mm size brick ballast including providing suitable pre-cast RCC covers with lifting lugs, laying of 150mm diameter x 5.0m long U.P.V.C. pipe embedded in pit/ outlet pipe all complete as per specification and directions of the Engineer-in-Charge.
13
-
1123234.68
Providing and fixing self cleaning S.C.I. heavy quality Floor/ Nahani trap with 100mm diameter inlet and 100mm diameter outlet, 125m m C.P. brass grating (heavy type) with or without vent arm including cost of cutting and making good the walls and floors, jointing with lead caulked joints, connecting with waste water pipe etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
55
-
95375.09
Providing and fixing 32mm diameter (Nominal Bore) brass ball valve of approved quality complete with high pressure copper floats, co mplete in all respects inclusive of cost of all materials, labour, tools, tackles, etc. complete as per specifications and direction s of the Engineer-in-Charge.
10
-
63798.47
Construction of second class brick masonary open surface drain (Size: 200mm wide & 200mm average depth) in cement mortar 1:4 laid ov er a bed of 150mm thick cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including mak ing haunches and providing 15mm thick cement plaster in CM 1:4 (1 cement : 4 coarse sand) with a floating coat of neat cement inside and its top and exposed surfaces, including excavatioin, disposal of the surplus earth up to any lead and lift as per standard desi gn and drawing, complete in all respects inclusive of cost of all labour, materials, carriages, excavation and refilling, curing etc ., as per specifications of the Engineer-in-Charge.
5375
-
10854935.05
Constructing Brick Masonary catch pit in cement mortar 1:4 (1 cement : 4 coarse sand) including necessary excavation, 200mm thick fo undation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm size) and inside and top plastering (15mm thic k) with cement mortar 1:4 (1 cement : 4 coarse sand) finished with a floating coat of neat cement making necessary connections to dr ains inclusive of all labour, material, equipment, etc., all complete as per drawing and directions of the Engineer-in-Charge.
-
-
-
750mm x 750mm x depth up to 1000mm inner dimensions
10
-
170065.61
600mm x 600mm x depth up to 750mm inner dimensions
19
-
253984.07
Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and lengt h below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the le ngth of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads [No tes: (1) Length of pile for payment shall be measured up to bottom of pile cap. (2) Truck Mounted rotary/ TMR/ Tubewell boring machi ne shall not be used] :
-
-
-
450 mm diameter piles
1016.34
-
1841136.5
Vertical load testing of piles in accordance with IS:2911 (Part-IV) including installation of loading platform by Kentledge/ Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per sp ecification & the direction of the Engineer-In-Charge. [Notes : (1) Initial and Routine Load Test shall not be carried out by Dynami c method of testing. (2) Testing agency shall submitt the design of loading platform for the approval of the Engineer-In-Charge.] :
-
-
-
Single pile up to 50 tonne Safe Capacity :
-
-
-
Initial Test (Test Load 2.5 times the Safe Capacity). (Note: Unit "EA" shall mean "PER TEST").
7
-
326769.65
Routine Test (Test Load 1.5 times the Safe Capacity). (Note: Unit "EA" shall mean "PER TEST").
10
-
210909.78
Cyclic vertical load testing of pile in accordance with IS Code of practice IS:2911 (Part-IV) by Kentledge method including preparat ion of pile head etc. for :
-
-
-
Single pile :
-
-
-
Up to 50 tonne Safe Capacity pile. (Note: Unit "EA" shall mean "PER TEST").
1
-
21090.98
Group of two or more piles :
-
-
-
Up to 400 tonne Safe Capacity of group. (Note: Unit "EA" shall mean "PER TEST").
1
-
41478.94
Lateral load testing of single pile in accordance with IS Code of practice IS:2911 (Part-IV) for determining safe allowable lateral load on pile :
-
-
-
Up to 50 tonne capacity pile. (Note: Unit "EA" shall mean "PER TEST").
7
-
147636.84
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neopre ne gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural d rawings and the directions of the Engineer-In-Charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
For fixed portion :
-
-
-
Powder coated aluminium (Minimum thickness of powder coating 50 micron)
1351
-
628808.36
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittin gs wherever required including the cost of EPDM rubber/ neoprene gasket required. (Fittings shall be paid for separately) :
-
-
-
Powder coated aluminium (Minimum thickness of powder coating 50 micron)
1860
-
1001728.67
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket et c. complete as per the architectural drawings and the directions of Engineer-In-Charge. (Cost of aluminium snap beading shall be pai d in basic item) :
-
-
-
With float glass panes of 5.50 mm thickness
358
-
435087.85
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS:6315, having brand logo embossed on the body/ plate with double spring mechanism and door weight up to 125 Kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-In-Charge. :
-
-
-
With stainless steel cover plate minimum 1.25 mm thickness
97
-
241237.04
Providing and fixing stainless steel (SS 304 Grade) adjustable friction windows stays of approved quality with necessary stainless s teel screws etc. to the side hung windows as per direction of the Engineer-In-Charge complete. :
-
-
-
205 X 19 mm
113
-
28944.11
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per d irection of the Engineer-In-Charge.
-
-
-
Powder coated (Minimum thickness 50 micron) aluminium tubular handle bar
130
-
80149.97
Providing and fixing 100 mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making g ood etc. complete.
85
-
36938.48
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complet e.
-
-
-
Powder coated (Minimum thickness 50 micron) Aluminium
113
-
7591.05
Providing and fixing aluminium round shape handle of outer diameter 100 mm with SS screws etc. complete as per direction of the Engi neer-In-Charge.
-
-
-
Powder coated (Minimum thickness 50 micron) Aluminium
90
-
7441.43
Filling the gap in between Aluminium/ Stone/ Wood frame and adjacent RCC/ Brick/ Stone/ Wood/ Ceramic/ Gypsum work by providing weat her/ structural non-sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of th e Engineer-In-Charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600.
-
-
-
Up to 5 mm depth and 5 mm width
603
-
70549.19
Providing and fixing, on fixed glazing/ doors/ window panes, sun control film "HP NATURAL 35 SAFETY COMBINATION FILM-4Mil" of M/s. G ARWARE or approved equivalent make and shade, all complete as per manufacturer's specification and as per instructions of the Engine er-in-Charge.
246
-
273226.05
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, blac k finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of me mbrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemi cal parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5 cm. (b) Tear strength in longitudinal and transverse direction as 300/250N. (c) Softening point of membrane not less than 150°C. (d) Cold flexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :
-
-
-
3 mm thick
2503
-
1263790.23
Supplying and using water proofing compound like CICO, PUDDLE or any other approved brand with Cement Plaster/ CC/ RCC complete in a ll respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Sit e Engineer.
639
-
89283.51
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of the Engineer-In-Charge.
1
-
1116.01
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulde rs, in required thickness, for all leads & lifts, all complete as per direction of the Engineer-In-Charge.
1
-
1256.62
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of the Engineer-In-Charge.
1
-
1256.62
Construction of open surface drain complete as per drawing including necessary excavation, refilling, disposal of surplus earth, pro viding and laying one layer of flat brick and cement concrete 1:3:6 (150 mm thick) at bottom, lining with brick masonry in cement mo rtar 1:4 (1 cement : 4 coarse sand), plastering exposed surface with 18 mm thick cement mortar 1:4 1:4 (1 cement : 4 coarse sand) wi th a floating coat of neat cement, rounding off corners etc. complete as per specification, drawing and directions of the Site Engin eer/ Engineer-in-Charge.
-
-
-
450 mm x 450 mm rectangular section radial drain.
990
-
2789135.91
Providing and making Construction/ Contraction joint by mechanically cutting 12mm x 25mm deep groove and filling with bituminous sea ling compound including cleaning etc. complete as per drawing, specifications and directions of the Engineer-in-Charge.
1283
-
764585.12
Providing and fixing 75mm diameter P.V.C. pipe (4 Kg/sq.cm) for Weep Holes in Masonry/ RCC wall including providing 230x230x230 mm s ize (approx.) filter using pebles of 40mm & down size in every weep hole on retaining side etc. complete in all respects inclusive o f cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.
1112
-
339967.53
Electrical PCP Works- Supply
-
-
-
"PERMANENT CATHODIC PROTECTION SYSTEM Supply of materials/equipments as given below complete in all respects, as per the specifica tion as detailed in the tender documen t including transportation to site and storing :"
-
-
-
"Solid State Decoupling Device:- Supply of Solid State Diode Decoupling Device of approved make including required length of cable a s per specifications for protecti on of MOVs and at HT line crossing locations"
22
-
2113531.06
"Supply of Surge Arrestors of approved make including required length of cable & as per specifications for protection of insulating couplings:- Spark Gap Surge Arrestorfor above ground and under ground suitable for 100 kA lightening Impulse Current (10/350 micro s), rated spa rk over voltage = 1.25 kV with connecting cable (EXFS 100 KU of Dehn or eq.)"
5
-
70428.36
Supply of Cathodic Protection unit of approved make, complete in all respects as given in the specification with all its accessories to ensure trouble free operation
-
-
-
230 V AC Operated automatic type Cathodic Protection Transformer Rectifier (CPTR) unit of rating 50 V,50 A DC with SCADA linkage fac ility as per specifications
1
-
432709.1
Supply of junction box of approved make as per specification detailed in the tender document complete with all connecting terminal & shunts, other fittings, DC bus, MS plate box, bakelite terminal board, cable termination bolts, painting etc.
-
-
-
Junction Box having IP-55 degree of protection
1
-
23058.44
Flameproof,Ex-d,IIA/IIB & Weather proof junction Box of approved make conforming to drg 9200-999000-40402-292-00.
6
-
102741.7
Supply of wall mounted DC distribution board of approved make in IP-42 ingress protection for power supply to CP equipments as given in technical specifications DC distribution board with one incomer, 100 A DP MCB & outgoing feeders 1x63A DP MCB & 2x32 A DP MCB
1
-
24038.87
Supply of XLPE insulated , PVC sheathed cable, 1100 v grade conforming to IS: 7098 (P-1) as per specifications and approved make
-
-
-
Copper Cable size 1cx35 sq. mm Armoured
1520
-
611796.96
Copper Cable size 1cx25 sq.mm Armoured
20
-
5801.82
Copper Cable size 2cx6 sq.mm Armoured
2840
-
538839.45
Copper Cable size 2cx70 sq.mm Armoured
100
-
56460.64
Tinned Copper Cable size 1cx10 sq.mm Unarmoured for distributed anodes of station CP system
150
-
30217.44
Supply of Cu- CuSO4 Half cell as per specifications of approved make
-
-
-
PERMANENT HALF CELL:- Supply of Cu- Cuso4 permanent Half cell with minimum 10 m length of tail cable, as per specifications of app roved make
13
-
129988.86
PORTABLE HALF CELL:- Supply of Cu- Cuso4 portable Half cell, as per specifications of approved make
6
-
35597.6
Supply of hand held data logger for ON/OFF PSP measurement alongwith carrying case, data downloading cable and other required access ories complete as per specifications and approved make
3
-
477958.8
Digital Multimeter with data logging, trend capturing and graphic display facility like Fluke 289 or eq.along with required accesso ries complete as per specifications and approved make
3
-
253080.58
Electrical PCP Works- Services
-
-
-
"Solid State Decoupling Device:- Installation of solid state decoupling device as per specifications including terminating the cable s in the TLP box with cable lugs, sealing material, laying of cable, testing & commissioning of Zinc anodes etc. all complete with required material, excavation, bac kfilling etc. as per specification and directions of Site Engineer/ Engineer-in-Charge."
66
-
546043.16
"SURGE ARRESTOR/SPARK GAP ARRESTOR:- Installation of surge arrestors including terminating the cables, laying of cable, testing & co mmissioning of surge arrestors etc. a ll complete with required material, excavation, backfilling etc. as per specification and dir ections of Site Engineer / Engineer-in -Charge."
28
-
230633.08
"PERMANENT HALF CELL:- Installation of permanent half cells including connecting the cable in the TLP etc. with cable lugs, sealing material, laying of cab le, testing & commissioning of cell etc. all complete with required material, excavation, backfilling etc. as per specifications, r ecommendation of cell supplier and directions of Site Engineer / Engineer-in-Charge."
23
-
221743.03
"COATING RESISTANCE SURVEY:- Conducting "" Coating-Resistance Survey"" for calculation of effective coating resistance of the pipeli ne in ohms-sq.m. along the en tire pipeline and plotting on SEMILOG or X-Y GRAPH & submitting the report in graphical form as well as soft copy as per Specificat ion / approved procedure and directions of Site Engineer / Engineer-in-Charge."
122
-
246065.07
"Close Interval ON/OFF Potential logging survey:- Conducting Close Interval ON/OFF Potential Logging Survey at an interval of 1 m ov er the buried line in the right of way including t he cost of all expert manpower, transportation and camping facilities etc. to the ir employees, materials, test instruments, equipmen ts, consumables etc., required for the survey as per the standard specifications , and approved procedures identification of areas/lo cations where coating repair is required alongwith suggestion for remedial meas ures etc. including the submission of draft reports i n 2 sets and incorporation of owner's comments in the draft report and final r eports in 6 sets including one soft copy containing th e survey results in the graphical as well as tabular forms computerised colou r print and complete in all respects and directions of Site Engineer / Engineer-in-Charge."
122
-
607364.36
"Close Interval Natural Potential logging survey:- Conducting Close interval Natural potential logging Survey at an interval of 1 m over the buried line in the right of way including the cost of all expert manpower, transportation and camping facilities etc. to th eir employees, materials, test instruments, equipme nts, consumables etc., required for the survey as per the standard specification s, and approved procedures identification of areas/l ocations where coating repair is required alongwith suggestion for remedial mea sures etc. including the submission of draft reports in 2 sets and incorporation of owner's comments in the draft report and final r eports in 6 sets including one soft copy containing t he survey results in the graphical as well as tabular forms computerised colou r print and complete in all respects and directions of Site Engineer / Engineer-in-Charge. Close Interval Natural Potential logging survey"
122
-
750318.08
"Direct Current Voltage Gradient Survey:- Conducting Direct Current Voltage Gradient Survey over the buried line to identify / pin p oint the coating defects in the right of w ay including the cost of all expert manpower, transportation and camping facilities etc. to their employees, materials, test instrum ents, equipments, consumables etc., required for the survey as per the standard specific ations and approved procedures, identificati on of areas/locations where coating repair is required alongwith suggestion for remedia l measures etc. including the submission of d raft reports in 2 sets and incorporation of owner's comments in the draft report and f inal reports in 6 sets including one soft copy containing the survey results in the graphical as well as tabular forms computerised colour print and complete in all respects as p er directions of Site Engineer / Engineer-in-Charge. Note : The item includes establ ishing the coating defect at specified locations by excavation in coordination with mainline contract or, who will arrange to repair the defects."
118
-
683011.19
"CAT survey:- Carrying out the Current Attenuation(CAT) Survey at 50 meters interval by measuring current loss along the mainline pi pe and using R adio Detection Instruments. Completing the entire work as per specification and EIC`s direction including all equipme nts with its ac cessories etc.tools, tackles, Battery transportation (Vehicle), related equipments,consumables, if any labour /manpo wer and any / al l relevant data collection as may be deemed necessary for carrying out the survey and interpretation /presentation of the results in cluding submission of reports complete in all respect thereof. Also locating the exact position of buried pipeline /defect of Pipelin e coating.Route mapping of the entire stretch at an interval of 10M with the help of GPS instrument (to be arrang e by contractor)and submission of the hard and soft copy to the EIC."
24
-
179902.8
"MUTUAL INTERFERENCE SURVEY:- Conducting Mututal Interference Survey among the new and existing pipelines / facilities(foreign) by t aking PSP survey of all the pi pelines as per approved procedure to determine level of interference at different places along the p ipeline and at point of crossi ng in common ROW including identifying points and providing the data/ record in graphical form and carrying out all necessary work for mitigating the interference observed among the pipelines , including retesting the same to ensur e efficacy of the remedial measu res undertaken.The contractor shall submit a full final report with detailed PSP readings at all TL Ps along with graphs in six sets .The item should be complete in all respect including survey, work for mitigating the interference and post mitigating survey as per specifications/directions of site engineer / Engineer-in-Charge."
122
-
1155428.72
"AC interference survey:- ""Conducting AC interference survey, to detect presence of any AC voltage(induced owing to proximity of an y HT transmission line ( a bove 33kV) crossing or running parallel within a distance of 50 M from the pipeline alignment as per app roved procedure. The work s hall be completed in all respects including survey recommending mitigation measures & post mitigation su rvey. The work includes all tools, tackles, consumables etc. all complete, required for survey / test as deemed necessary and as per the directions of the site engineer / Engineer-in-Charge. Note : AC interference survey shall be done at respective TLP by connecti ng data logger to maintain r ecord for minimum 24 hours. The data to be submitted for each such TLP alongwith coloured graph and rec ommendations. AC interference survey"""
69
-
1046760.76
"Soil resistivity survey:- Conducting ""Soil Resistivity Survey"" at anode bed location after ascertaining its suitablity with respe ct to the existing system , for installation of Anode Bed (deep / shallow / distributed), as per the specification, approved proced ures and instructions of Sit e Engineer / Engineer-in-Charge. Soil resistivity Survey"
1
-
11965.28
"Cathodic Protection Units Erection, testing and commissioning of cathodic protection units (CPTR/CPPSM); including supply and insta llation of all facilities, materials etc., including fuses, all supporting structures, laying and connecting the 1100 V Grade power cable (2 runs of 1Cx25 sqmm Cu. conductor XLPE insulated Armoured Cable) from DCDB to CPPSM unit / laying and connecting the 1100 V Grade power cable (owner pr ovided 1 run of 3Cx10 sqmm Al. conductor XLPE insulated Armoured Cable) from ACDB to CPTR unit, provid ing the earthing arrangement. The work includes furnishing the test results by conducting all the NO LOAD and ON LOAD tests on the CP units and adjusting setting s as required and testing the pipeline section for full cathodic protection for entire stretch. The j ob complete in all respect shal l include cost of all labour, tools as per specifications and directions of the Site Engineer / Eng ineer-in-Charge."
-
-
-
48 V DC operated auto type Cathodic Protection Power Supply Module (CPPSM) unit of rating 25 V 25 A DC with SCADA linking facility
2
-
111345.72
230 V AC operated auto type Cathodic Protection Transformer Rectifier (CPTR) unit of rating 25 V 25 A DC with SCADA linking facility
2
-
80210.03
230 V AC Operated manual type Cathodic Protection Transformer Rectifier (CPTR) unit of rating 50V, 50A DC
1
-
22245.07
"DC distribution board:- Installation and commissioning of wall mounted DCDB including supply of all cable end lugs, cable glands, f ittings & fixtures and al l other required accessories, tools and tackles complete in all respects as per directions of Site Enginee r/Engineer-in-charge. Item includes supply and termination of 2 runs of 1cx25 sq. mm copper cable for Battery Bank"
1
-
4579.98
Installation of Flameproof CJB with accessories for distribution of current among pipelines
2
-
40793.26
Laying of anode header / cathode / reference cell cables at a minimum depth of 1 meter and connection to the CP unit / pipeline / ha lf cell etc. The work includes excavation, installation, supply of all required materials such as sealing materials, lugs, PVC slee v e, repair materials etc., and carrying out all works such as exposing pipe, coating repair, cad welding / pin brazing, backfilling e tc.,; in all types of strata and soil (including rock) by making the trench, back filling the trench, cable terminations, work co mpl ete in all respects including cost of all labour, material, tools etc. as per specification and instruction of Site Engineer / E ngin eer-In-Charge and approved drawings.
-
-
-
1cx35 sq. mm
2600
-
644249.32
1cx25 sq. mm
100
-
18389.12
2cx6 sq. mm
4000
-
780404.8
1cx10 sq. mm
150
-
34385.79
"Cable Laying Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in tra ys, in protective pipes, poles,columns, in conduits, in panels and on structures etc.;including the supply and instal lation of all r equired materials such as fixing clamps ,screws, cable straps, tags etc. as required (other than the supply of the conduits, ca bles, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tools, co nsumable materials etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge"
-
-
-
Power cables LT : OD upto 20 mm
3350
-
135350.72
Power cables LT : OD above 20 mm and upto 40 mm
100
-
5872.86
"CP Reading :- Measuring, recording and submitting the cathodic protection readings along the entire pipeline by repeated adjustment s of the settin gs of the CPTR/CPPSM units etc as per specifications for achieving full/maximum protection of all the stretches as per the criteria of protection mentioned in the specifications. Measuring the relevant readings at the cathodic protection stations and ""pipe to so il potential"" readings at all the test lead locations along the pipeline including the CP station parameters lik e current(AC/DC), voltage(AC/DC),circuit resistance,battery voltage/current etc.,preparing and submitting pipe to soil potential pro file, graphs and other data pertaining to the cathodic protection of the pipeline,job complete in all respects as per specificatio n and instructions of Site Engineer / Engineer-in-Charge, including cost of all labour, instruments and services rendered."
122
-
72499.7
"Final Commisioning of CP system Final Commissioning of the impressed current cathodic protection system for the mainline for achiev ing full protection as per protec tion criteria as mentioned in the specifictions through repeated adjustments of the CP units after installation of galvanic anodes f or hot spot protection and mitigation of AC/ DC interference, if any and submission of the result ant data to the owner and testing, measuring, recording and submitting all these data once again after the lapse of a period as per specifications / directions of the Site engineer / Engineer-in-Charge, including the cost of all labour tools and materials as requi red, complete in all respect."
1
-
135432.18
"Station CP readings and commissioning of station CP system:- Measuring, recording and submitting the cathodic protection readings for the station piping by repeated adjustments of the setting s of the TRUs etc for achieving full/ maximum protection as per the c riteria and priority of protection as mentioned in the specifi cations ., measuring the relevant readings and ""pipe to soil poten tial"" readings at all the test lead locations in the station in cluding the CP station parameters like current(AC/DC), voltage(AC/ DC) , circuit resistance etc. , preparing and submitting pipe t o soil potential profile, graphs and other data pertaining to the cathodic protection of the station CP system for all the station CP Systems installed as per respective item, job complete in all r espects as per specification and instructions of Site Engineer / E ngineer-in-Charge, including cost of all labour, instruments and services rendered."
1
-
71775.44
Electrical PCP Works- Composite
-
-
-
Zinc Anode for Hot spot protection : Supply, Installation , testing and commisioning of Zinc anode (minimum 10 Kg each) including it s tail cable of size of 1c x 25 sq.mm. XLPE/ PVC insulated stranded copper cable of total length 10 meter including PVC cap, specia l back-fill material ( filled in cotton sack) with sealing compound complete in all respect including its excavations, back filling e tc. as per specifications and drawings. The work complete in all respect shall include supply of all labour , tools etc. and shal l b e carried out as per the directions of the Site Engineer / Engineer-in-Charge and as per AFC drawings.
57
-
544407.82
Magnesium Anode : Supply, Installation , testing and commisioning of Magnesium anode (minimum 5 Kg each) including its tail cable o f size of 1c x 10 sq.mm. XLPE/ PVC insulated stranded copper cable of total length 10 meter including PVC cap, special back-fill ma t erial ( filled in cotton sack) with sealing compound complete in all respect including its excavations, back filling etc. as per s pe cifications and drawings. The work complete in all respect shall include supply of all labour , tools etc. and shall be carried o ut as per the directions of the EIC/ Site Engineer and as per AFC drawings.
24
-
184675.29
"Anode-deep well:- Supply & installation of Anode bed ( deep well type with MMO anodes) as per the approved configuration for Impre ssed Current Cathod ic Protection system including supply, laying & termination of all anodes, anode tail cable (XLPE insulated cop per conductor) suita ble with length for connecting upto Anode junction box without any joints in between including laying of PVC s leeve / trunk pipe, c asing pipe , centralizers, vent pipe & drawing all the lead wires through the pipe and connecting the same wi th Anode bus in Anode junction box including erection and providing foundation of Anode Junction Box as per specifications inlcudin g supply, excavation, backfill of earth etc. as per specification & also compacting the same with soil for restoring it to normal finished ground level all complete with all labour & material as per instruction of Site Engineer / Engineer-in-Charge, Specificat ions and approved drawi ngs. Note : Each Anode bed means anode bed at each location irrespective of number of anode strings required ."
2
-
1371027.01
"Station : Distributed type shallow:- Supply & installation of MMO type anodes as per the approved configuration for 'Impressed Cur rent Cathodic Protection' system of st ation piping / structures including all anodes, laying & termination of all anode tail cable (XLPE insulated copper conductor) suita ble with length for connecting upto Anode junction box without any joints in between includ ing supply and laying of PVC sleeve / tr unk pipe & drawing all the lead wires through the pipe and connecting the same with Anode bus in Anode junction box including erect ion, providing foundations of Anode Junction Boxes & Cathode Junction Boxes, providing cha in link fencing around Anode junction Box wherever required, as per specifications including supply of back fill material, excavati on, backfill of earth and filling the sand with requisite back fill material as per specification & also compacting the same with s oil for restoring it to normal finished gro und level all complete with all labour and material as per instruction of Site Engineer / Engineer-in-Charge, Specifications and ap proved drawings. Note : Supply of anode tail cable for distributed anodes for station C P are covered elsewhere in SOR"
1
-
421595.82
Test Lead Point : Supply, installation, testing & commissioning of Test Lead Point (TLP) fabricated MS Sheet with hinged front door , Heavy Guage MS pipe 100 mm nominal diameter, Phenolic laminated terminal plate, brass terminal bolts, neoprene gasket for front d o or, vandal proof concealed lock, etc as per latest revision of Standard AFC drawing (9200-99900-404-603-03 : STD-483). The work i nc ludes providing requisite concrete foundation of 600 mm x 600 mm x 800 mm at site, including MS hard pipe for cable entry throug h f oundation, erection of the TLP over concrete foundation, termination of cables to the brass terminal bolts inside TLP box, joint ing the cables to pipe (using cad welding/ pin brazing technique), repairing the damage to coat & wrap (with coating repair etc.), back filling the trenches, cleaning the site, applying epoxy paint / powder coating etc. The work also includes supply, installati on, l aying & termination of all XLPE, Cu cables of required length (as per site conditions) and size, lugs etc. The work includes s upply and fixing of a non-corrosive name plate containing the details like KM location, identification, TLP No., direction of flow, connec tion scheme, type etc., on the side of the TLP box, etc. The name plate shall also include the details of corrosion coupon wh erever installed, all as per the direction and specification detailed in the document complete with tools, tackles & other necessary requir ement. The work complete in all respects including all materials, tools, tackles, labour as per tender specifications, AFC d rawings & directions of the Site Engineer/Engineer-In-Charge.
-
-
-
TLP type "A" , Flameproof,Ex-d,IIA/IIB & weather proof as per specifications and drawing (With inbuilt provision of Voltmeter & push button for PSP Measurment)
7
-
159005.66
Type B (With Ingress Protection IP:55)
1
-
44419.52
Type B (Flameproof,Ex-d,IIA/IIB & weather proof as per specifications and drawing)
5
-
263910.78
Type C (With Ingress Protection IP:55)
1
-
29054.84
Type D (With Ingress Protection IP:55)
1
-
22540.14
Type DAC (With Ingress Protection IP:55)
1
-
34534.05
Flameproof,Ex-d,IIA/IIB Type DMV (With Ingress Protection IP:55) - with inbuilt provision of Voltmeter and Pushbutton for PSP Measu rment.
1
-
45461.6
Flameproof,Ex-d,IIA/IIB Type E (With Ingress Protection IP:55) - with inbuilt provision of Voltmeter and Pushbutton for PSP Measurme nt.
1
-
51800.27
"Corrosion coupon:- Supply and Installation of CS corrosion coupon with 1 sq. cm bare metal with 2 numbers 4 sq. mm lead of minimum 10 m long lead wit h in a distance of 0.5 M from the pipeline inclusive of cable & terminating the cable in the TLP terminal. The corrosion coupons are to be installed with specified Test lead points for which prior approval to be obtained from Owner. The item also includes supply, installation / laying & termination of all XLPE, Cu cables of required length (as per site conditions) and siz e as mentioned in the standard drawings, toggle switch, cable glands and lugs etc., complete in all respect. All as per the directio n and specification de tailed in the document complete with tools, tackles & other necessary requirement for preparation of the coup on. The work complete i n all respect shall include supply of all labour, tools etc complete as per the directions of the Site Engin eer and as per drawing n o. 9200-99900-404-601-08."
1
-
7091.87
"Cable Marker Supply, erection and installation of MS cable markers; including excavation,installation of the markers,cement concr ete grouting, back-filling etc. required as per drawings, specifications and directions of the Site Engineer,including the cost of all ma terials, labour,tools etc. complete in all respects as per the directions of Site Engineer / Engineer-in-Charge."
40
-
47141
PSP and DC pipeline current display meter:-Supply , installation, testing & commissioning of PSP display meter along with enclosure having microprocessor based unit with built-in GSM modem or ethernet connectivity, data logger facility with SD card memory of minim um 8 GB, high accuracy built-in The Real time clock(RTC) and provision for data transmission to SCADA system as per the direction a n d specification detailed in the document. The work complete in all respects including all materials, tools, tackles, labour as per t ender specifications, AFC drawings & directions of the Site Engineer/Engineer-In-Charge
1
-
42454.34
"Signal Isolators:-Supply,installation,testing & commissioning of two seperate 4-20mA converters((0 to 20 mV) & (0 to -2V) Input res pectively, 2x(4to20 mA) Output in each converter) in pre installed TLPs at SV/IPIG/CP locations as per the approved drawings and sp ecification detailed in the document. The work complete in all respects including all materials, tools, tackles, labour as per ten d er specifications, AFC drawings & directions of the Site Engineer/Engineer-In-Charge."
6
-
56039.76
Electrical CSW Supply
-
-
-
"SAFETY EQUIPMENT :- Supplying the following Safety Equipment as per directions of Site Engineer / Engineer-in-Charge"
-
-
-
RUBBER HAND GLOVES : Rubber hand gloves suitable for 11/6.6 KV operation with ISI mark.
13
-
46097.62
Supply and installation of 11/6.6 KV Discharge Rod
1
-
9650.39
Insulating Elastomer mats conforming to IS 15652:2006 of thickness 2 mm (Class A)
174
-
460200.14
Insulating Elastomer mats conforming to IS 15652:2006 of thickness 2.5 mm (Class B)
2
-
6041.72
Supply of fully charged CO2 fire extinguishers as per specifications (4.5 kg capacity as per IS: 2878 latest)
29
-
208971.27
Supply of fully charged CO2 fire extinguishers as per specifications (2 kg capacity as per IS: 2878 latest)
26
-
128675.91
Supply of fire buckets mounted on stand
26
-
96533.39
Supply of "The flameproof (Ex'd) and weatherproof (Minimum IP-65) Distribution Boards (with Spares) made up of Cast Alluminium Alloy LM-6 with 125 A, TPN busbar, 01 no. 100 Ampere, 4 Pole MCCB suitable for termination of cable of size up to 3.5Cx50 sqmm, Alumini u m Armoured cable. 01 additional spare entry suitable for 3.5CX50sqmm cable size shall be provided, which shall be plugged with fla me proof and weatherproof entry plug. 09 Nos. 32A, 3 Pole MCBs suitable for termination of 3C x 10 sq.mm., Armoured cable Breaking c apa city of MCB shall be 10 kA for 1 Sec and shall be C-curve application suitable for motor duty. It shall be certified for applica tion in Zone-I, Gas Group IIA & IIB, Temp class T3 and shall be of approved make as mentioned in the technical specifications. The item includes suply of flame proof double compression cable glands of nickel plated brass material for each cable entry 01 no. for cable entry of size up to 3.5C x 50 sq.mm., 02 no for 3.5 C x 25 Sq mm cable, 09 no. for 3Cx10 sqmm, Aluminium armoured cable. Cab le dime nsions shall be provided at drawings approval stage. Supply shall be as per technical specifications of flameproof DB attach ed with supply specifications."
3
-
315349.82
Electrical CSW Services
-
-
-
CABLE TRENCH :-Excavation in unpaved areas of earth in work sites for conventional cable trenches for a depth upto 1.5 metres incl uding shoring, strutting etc. (if necessary), backfilling the trench, job complete in all respects, including all labour and m aterials complete as per drawings, specification and directions of Site Engineer / Engineer-in-Charge
3900
-
3054669.54
WBM ROAD / CONCRETE BREAKING : WBM Road/concrete breaking for cable trenches including required shoring strutting etc., and repairin g of the road/dyke to original condition and disposing off excess materials (within the work site) job complete in all resp e cts including the cost of labour, tools, materials, load, lift hire charges of equipments, if any, complete as per drawings, sp ecification and directions of Site Engineer / Engineer-in-Charge
230
-
1158620.17
"Cable Laying Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in tra ys, in protective pipes, poles,columns, in conduits, in panels and on structures etc.;including the supply and instal lation of all r equired materials such as fixing clamps ,screws, cable straps, tags etc. as required (other than the supply of the conduits, ca bles, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tools, co nsumable materials etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge"
-
-
-
Power cables LT : OD upto 20 mm
33700
-
1361587.84
Power cables LT : OD above 20 mm and upto 40 mm
15300
-
898547.58
Power cables LT : OD above 40 mm and upto 60 mm
2600
-
247127.4
Power cables HT
400
-
56847.68
Control cables (T&I) : OD upto 20 mm
23000
-
2092494
Control cables (T&I) : OD above 20 mm and upto 30 mm
18600
-
1929229.2
Installation, laying of 2 Pair PVC insulated copper conductor un-armoured telephone cables in 16 mm/ 25 mm/ 32 mm PVC conduits from IDF through ceiling/ wall/trench and post-laying end to end testing of telephone cables. The job includes supply, installation, fix ing of wall mounted telephone socket outlet with 2 port telephone jack face plate (white/ cream colour) including RJ11 I/O with mod u lar plate & switch box/ gang box for fixing the face plate & accessories, supply and installation of PVC Conduits, all required ma te rials such as fixing clamps, screws, cable straps, tags etc. as required complete in all respects as per specifications & scope of work, drawings and directions of Site Engineer/ Engineer-in-charge including cost of all labour, tools & tackles, materials etc.
3000
-
570541.8
Installation, laying of Cat 6 LAN Cables in 16 mm/ 25 mm/ 32 mm PVC conduits from network switch through ceiling/wall/trench and pos t-laying end to end testing of cables. The job includes installation & fixing of Duplex (2 port) Face plate (Network I/O point) (wh i te/ cream colour) for Local Area Network including RJ45 I/O, modular plate & switch box/ gang box for fixing the face plate & acce ss ories, supply and installation of PVC Conduits, all required materials such as fixing clamps, screws, cable straps, tags etc. as req uired complete in all respects as per specifications & scope of work, drawings and directions of Site Engineer/ Engineer-in-char ge i ncluding cost of all labour, tools & tackles, materials etc.
3000
-
402781.2
Silent LT DG set : Erection, Installation including site transportation from owner designated location, connecting, testing and com missioning of owner supplied Emergency LT DG set including execution of terminal connection of power/control cable. The work shall i nclude grounding of alternator neutral, earthing, providing water pipe connection for Radiator water make-up complete with valve, so lenoid valve etc. piping for fuel line, fabrication, welding, erection and painting of owner supplied support structure (including s upply of shortfall support structure, if any) for exhaust piping, mounting on channels/AVM pads, installation of PLC based AMF panel , NIG panel, exhaust piping including insulation and cladding, fuel piping etc., materials, labour, tools and tackles, consumables e tc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge
13
-
716385.52
Connection and testing of 415 V AC 3 phase / 230 V AC single phase motors (including space heaters/thermistors wherever provided) / AC/DC Actuators including execution of terminal connection of control and power cables, earthing of the motor/actuator/ connecting t he thermistor, installing the controller in LT panel, earthing the motor frame, armour etc. as per the drawings, erection manuals, a nd as per directions of Site Engineer. Job complete in all respects including the cost of supplying and installation of all the re qu ired FLP/WP cable glands, reducers, adapeters, end lugs, GI earthing wire / strips, labour, tools, materials, etc., as required i n a ll respects for all types of motors/heaters/thermistors/actuators etc.
-
-
-
Capacity upto and including 1 KW
3
-
10466.01
Capacity above 1 KW and upto 2.5 KW
105
-
435514.69
Capacity above 2.5 KW but upto 7.5 KW
3
-
17116.96
Capacity above 7.5 KW but upto 50 KW
3
-
53455.56
"LT Panel: Erection, installation including site transportation from owner designated location, testing and commissioning of 415 V, owner supplied power-control- centres, motor control centres, soft starters,static voltage regulators, APFC panel etc. assembling a s required, installation on the already made foundation channels, aligning, levelling, grouting, assembling, making all the inter co nnections /outgoing/incoming power & control cable/ bus duct connection including making holes for cable entries as required as per drawing, specifications and directions of the Site Engineer/Engineer-in-Charge including cost of all materials, tools labour etc. co mplete in all respect including termination of all power, control cables, installation of thermistor controller, internal wiring, ea rthing of LT panels, supply of cable glands etc.complete as per cable schedule, drawings etc. "
-
-
-
"Weight of unit above 100 kg but upto and including 500 kg "
5600
-
459784.64
"Weight of unit above 3000 kg but upto and including 6000 kg "
14500
-
2157228.8
"HT SWITCHBOARD (6.6/11 KV): Erection, Installation including site transportation from owner designated location, testing and commis sioning of HT Switch Board consisting of VCB's and other accessories including termination of all LT/control cables, installation on foundation channels, drilling, cutting, welding, aligning, levelling, grouting, assembling and fitting all accessories / instrument s / relays, relay coordination, CT, PT, Numerical Relay with basic features like O/C, E/F and additional protections etc., connectio n of 230 V Supply / battery bank 110 V DC supply, earthing of HT Switchboard, making all the interconnections/ outgoing/incoming LT power & control cable connections including making holes for cable entries as required with materials i.e. WP Cable glands, end lugs , labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charg e Note: Commissioning assistance (Only Supervision) shall be provided by the supplier of the HT Switch Board:- Single VCB panel"
1
-
320112.06
"TRANSFORMER :-Installation, testing and commissioning of owner supplied (outdoor type -ONAN cooled) transformer, casting of foundat ion block, & erection of transformer over the rail and foundation channels, including transporting , unpacking, rigging,aligning, l e velling, grouting, assembling, fitting and fixing all accessories/instruments/ relays etc. supplied separately if any,etc., makin g all the interconnections & termination of all power (HT / LT) cables, control cables / busbar etc. as per drawings, including eart hi ng/grounding of transformer neutral as per drawing, equipments needed to completely install and commission the transformer Job c omp lete in all respect including cost of all labour, tools and materials and all services rendered complete, as per the drawings an d di rections of the Site Engineer / engineer-in-Charge. "
1
-
102983.11
FLP & WP Distribution Board Erection, installation including within site transportation, testing and commissioning of 415 V , Flame proof distribution boards (FLP-DB) under scope of supply of bidder, assembling as required, installation on the already made founda t ion channels, aligning, levelling, grouting, assembling, making all the inter connections /outgoing/incoming power & control cable / bus duct connection including making holes for cable entries as required as per drawing, specifications and directions of the Site E ngineer/Engineer-in-Charge including cost of all materials, tools labour etc. complete in all respect including termination of al l p ower , control cables, installation of thermistor controller, internal wiring, earthing of FLP-DB panels, supply of cable glands etc .complete as per cable schedule, drawings etc."
1200
-
98157.12
"Erection, Installation,Testing & Commissioning of the Owner supplied high mast tower with the help of suitable tools and plants, wi ring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1 . 5 sq. mm, lugs, MCB and all labour. Scope of work shall include erection & installation of high mast tower, cable connections, er ec tion & installation of luminaries & aviation lights, lightning finial, all accessories, cables, etc., erection, foundation casti ng & grouting of owner supplied FLP feeder pillar, end connection termination & laying of Owner supplied cable from feeder pillar to ba se compartment of high mast complete with all materials and labour as per instruction of Site Engineer/EIC. Earthing works for High Mast tower including construction of earth pits to be operated in relevant separate item:- For 30 M Height High Mast Tower"
2
-
170555.43
" Construction of shallow foundation with M20 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth complete with all materials and labour as per instruction of Site Engineer/EIC. Design of foundation sha ll be provided by IOCL. Piling work if required as per soil strata in foundation of high mast is not covered in this scope of work a nd shall be taken up separately:- For 30 M Height High Mast Tower"
2
-
456425.39
Installation of corrosion monitoring probes including 2" Flareweld on station piping at desired location and 12 O'Clock position for mounting of ER Probe under the supervision of site engineer. Flareweld assembly shall be supplied by owner. The job complete in al l respect with material, tools & tackles, consumables etc.
3
-
60362.88
Electrical CSW Composite
-
-
-
"GI CABLE TRAY Supply, installation & fixing of prefabricated perforated GI cable trays of width 150 mm, 300 mm, 450 mm & 600 mm as per site requir ement for laying of cables with standard rung spacings. Load for support span of 2.5 meter as 30, 60, 75 & 90 (in Kg /Mtr) respective ly with concentric static load as 70 Kg at the centre, with materials, labour, tools and tackles, consumables etc , as per drawings , specification and directions of Site Engineer / Engineer-in-Charge"
7593
-
1610602.86
"SAND FILLING Supplying and spreading of approved quality fine dry river sand in cable trenches including the cost of all material, transport, loa d and lift charges, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge"
2025
-
1833606.72
"BRICK SOLING Supply and laying of approved quality 75 mm thick second class brick flat soling with sand filling in the interstices, in cable tren ches for protectionincluding the cost of all brick and sand, labour, load and lift charges , tools and tackles etc , as per drawing s, specification and directions of Site Engineer / Engineer-in-Charge"
5530
-
5226519.13
"CABLE MARKER Supply, erection & installation of MS cable markers, including excavation, installation of the markers, cement concret e grouting, ba ckfilling, materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge"
470
-
1248964.75
"LT Cable joint (1.1 KV): Making straight through joints on Al/Cu conductor XLPE/PVC insulated armoured cable including the supply o f required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem/Mseal/3M) , materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge "
-
-
-
Power cables LT : OD upto 20 mm
3
-
15723.58
Power cables LT : OD above 20 mm and upto 40 mm
3
-
19522.71
Power cables LT : OD above 40 mm and upto 60 mm
5
-
46872.31
"HT Cable Termination (6.6/11 KV): Supply, termination and connection of XLPE cable termination kit (indoor type), heat shrinkable s leeve type of Raychem/M-Seal/CCI ma ke with all accessories, including cutting (tools and accessories for termination should meet th e selected standards), stripping of cable insulation providing copper cable end lugs and cable glands as required, restoration of in sulation, supplying and providing th e cable supporting clamps, straps, cable tags connection to the terminals of HT panel, VFDs, Is olators, transformer, DG etc., earthi ng of armouring, materials, labour, tools and tackles, consumables etc , as per drawings, spe cification and directions of Site En gineer / Engineer-in-Charge:-HT Cable of size upto 3cx240 sq. mm "
4
-
93570.27
"EARTH ELECTRODES Supplying, installation, testing of GI earthing electrode, including the supply and installation of the CI cover, charcoal /special backfill etc. and construction of chamber; complete as per drawings,specifications and directions of the Site E ngineer, Including the cost of all labour, tools, materials etc. complete in all respects."
43
-
799495.47
"ACE Chemrod Earthing:Supply, installation, testing and commissioning of ACE (Artificial concept of earthing with chemical rod) Chemrod earthing electrode by digging earthing Item includes the supply and installation of the CI/RCC cover in the earth pit, b a ckfilling etc. and construction of chamber; complete including excavation, backfilling and supply of all materials required for ma king earth pit as per drawings, specifications and directions of the Site Engineer, Including the cost of all labour, tools, mat eri als etc. complete in all respects. "
26
-
490427.16
"EARTHING SYSTEM SET (03 PITS) Supply, installation, testing of earthing system consisting of 3 earth pits of perforated GI pipes ea rthing electrodes and copper pl ate terminal block including construction of chamber using cement concrete with earthing pit cover a nd frame, supply of charcoal / / special backfill , salt etc including supply of interconnecting cables / strips including necessary welding etc complete as drawings , specifications and directions of the site engineer/Engineer-in-charge, including cost of tools, materials etc complete in all resp ects as per drawing. The job shall also include testing of each earth pit and the entire earthing system on whole. Note: Earthing for field instruments shall be provided from Station earth grid covered in Electrical SOR."
26
-
1780288
"EARTHING PLATE Supply & Installation of G.I. earthing plate as per drawing no. 9200-99900-404-009-00 outside the buildings. The ite m also includes grouting of the plate as shown in the drawing. The item should be complete in all respect including all materials, t ools, tackels et c. and as per direction of EIC / Site engineer."
40
-
70614.03
"EARTH STRIP / WIRE / ROPE / CABLE Supply, installing and testing of earthing strip/wire/rope/cable for completely making the earth ing grid system by supplying, layin g the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing g rid etc., complete as per drawings, specifications and directions of the Site engineer/Enginee r-in-charge, including the cost of al l labour, tools, materials, etc. complete in all respect. "
-
-
-
50 mm X 6 mm G.I. earthing strip
1125
-
367279.43
40 mm X 5 mm G.I. earthing strip
130
-
29593.93
25mm x 3 mm copper flat
75
-
53402.67
GI wire (8 SWG)
1285
-
90477.62
Copper cable as per specifications - 10 Sq.mm
550
-
117514.43
Copper cable as per specifications - 100 Sq.mm
250
-
564352.7
Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (a lready made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends , sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as requir ed Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions o f s ite engineer / Engineer-in-Charge.
-
-
-
25 mm
470
-
242437.84
50 mm
1076
-
1195848.11
100 mm
377
-
750265.29
"STEEL STRUCTURAL WORKS Supply, fabrication, erection, installation of steel structural works of any type and shape such as cable ra ks, cable trays, push bu tton control posts etc., as required job complete in all respects including the cost of all labour, tools, material etc., complete. and as per specifications and directions of site engineer/ Engineer-in-Charge. "
3004
-
492326.16
"FLP & WP JUNCTION BOX Supply, erection, installation, testing and commissioning of flameproof & weather proof junction box for providing cable terminatio n of motor, including connection and termination of earthing wire and conduits etc., including supply & installation of double compr ession cable glands & flame proof plugs for sealing all spare entries complete as per drawings, specifications and direction of the Site Engineer, including the cost of all labour, tools, consumable materials etc., complete in all respect:- 4 way junction box with 4 cable entries (4 x 3/4"") at bottom & 20 nos. terminals."
13
-
121999.02
"FLAME PROOF FITTINGS : Note: All equipment under this category shall be suitable for location in zone-I gas group IIA & IIB (Temp. class T3) area with a se parate terminal box for incoming cable and a separate terminal box for out going cable (where applicable), apart from separate enclo sure for each equipment including control gear etc. in IP 65 cast aluminium LM-6 certified enclosure. "
-
-
-
FLP/WP ROTARY SWITCH : Supply, installation, testing & commissioning of Flame proof weather proof ON/OFF Rotary Switch , IP65, LM6, including including supply & installation of double compression cable glands & flame proof plugs for sealing all spare entries etc., complete in all respects
13
-
83464.79
"FLP/WP EXHAUST FANS : Flame proof, weather proof, single phase, 12"" exhaust fan, IP65, LM6 type EF1001 of FCG or equivalent alongw ith supporting frame, bolts, louvers, flame proof motor, including supply & installation of double compression cable glands & flame proof plugs for sealing all spare entries, complete in all respects :- FLAMEPROOF EXHAUST FAN,12"", SUITABLE FOR Exd Gas Group II C , as per IS/IEC 60079-2007"
16
-
171508.94
FLAMEPROOF TUBELIGHT, 2x22Watt, LED, SUITABLE FOR Exd Gas Group II C, as per IS/IEC 60079-2007
32
-
346085.5
FLAMEPROOF LED FITTING 125W, Ex'd' (Flameproof) Flood Light Fixture, Aluminum (LM 6), Classification:-Zone 1&2, Gas Group:-IIA/IIB, IP 65, T6. Complete with optics, Glass-Toughened Clear Well Glass, Wire Guard: M.S. Epoxy Painted-(White Color) with provision of C able Entries: 2 Nos. x 3/4"" ET, Cable Glands: 2 Nos. x 3/4"" ET (Max. OD 20mm) - Ex'd'(IIA/IIB), DC, Brass Nickel Plated with PVC H ood. Blanking Plug: 1 No. x3/4"" ET - Ex'd', Brass Nickel Plated. Gasket: Neoprene, Hardware: SS 304, Earthing: External 2 Nos. (M 6) , Internal 1 No. (M5), Mounting Arrangement: withM.S. Bracket Suitable to Ceiling mounting (With Type 'B' Suspension Bracket / Ey e B olt). Finish: Epoxy Powder Coated Grey Shade 631 of IS-5.
14
-
430664.84
SHOCK TREATMENT CHART :Supply and installation of shock treatment chart framed in good quality glass in English / Hindi / Local Lan guage).
46
-
114003.2
CAUTION BOARD :Supply and installation of vitreous enamel caution boards suitable for 440 V/11KV/6.6 KV as per IS 255 including fi xing on the wall with all the required hardware etc. complete in English / Hindi/ Local Language.
26
-
65078.11
"STAINLESS STEEL INSCRIPTION PLATE : Supply and installation of approved quality stainless steel name inscription plates including a nodising, engraving the inscriptions, providing screws, etc. for equipments viz. motors, motor control centres, switchgears, push b u tton stations etc. as required, providing necessary holes tapping etc. and fixing the same complete in all respect as per the dire ction of Site Engineer/Engineer-in-charge including the cost of all labour, tools etc."
52
-
59683.64
"PLASTIC INSCRIPTION PLATE : Supply and installation of approved quality plastic name inscription plates including engraving the in scriptions, providing screws, etc. for equipments viz. motors, motor control centres, switchgears, push button stations etc. as req u ired, providing necessary holes tapping etc. and fixing the same complete in all respect as per the direction of Site Engineer/Eng ineer-in-charge including the cost of all labour, tools etc."
52
-
48518.58
"Point wiring Supplying, installation and testing with 1.5 Sq.mm stranded PVC insulated copper conductor wires for phase & neutral o f 650V grade i ncluding earthing by providing 1.5 Sq.mm earth insulated continutity wire of copper in PVC conduit (Supply & installa tion of PVC con duit covered elsewhere in SOR) recessed on wall/ceiling/ false celing including supply & installation of switch boxe s,junction boxes , pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . The circuit wiring with 4 Sq.mm PV C copper wire fro m D.B. to switchboard as required is also in the scope of the contractor."
-
-
-
1 light point controlled by 1 switch.
71
-
105732.04
2 light points controlled by 1 switch
21
-
37678.98
3 light points controlled by 1 switch
12
-
27449.44
4 light points controlled by 1 switch
3
-
8199.24
Wiring with PVC insulated 2.5 sqmm copper conductor wire for fan points (1 fan point controlled by 1 modular switch) including provi ding space for electronic regulator in switch box , providing and fixing fan hook in the ceiling as per specifications and drawings .
32
-
74597.15
"Wiring with PVC insulated 2.5 sqmm copper conductor wire for phase & neutral , 650 V grade including earthing , the third pin with 1.5 sqmm copper conductor earthing insulated continuity wire for exhaust/ wall bracket fan including providing and fixing of 5 pin 6 A modular socket and 10 A modular switch near the door or as as per specifications and drawings. The circuit wiring shall be with 4 sq. mm PVC copper wire from switchboard to 1st exhaust fan for multiple exhaust fans in one circuit. "
35
-
83941.84
Wiring for 250 V single phase and neutral 16 amps modular power plug point with PVC insulated 4 sq. mm. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 2.5 sq. mm copper conductor earthing insulated continuity wire, complete with providing and fixing of 6 pin 16/6A modular socket and 20/10 A modular switch (1 plug point per circuit) as per specif ications and drawings
21
-
76464.14
"Wiring as in item no. 1 for 250 V single phase and neutral 6 amps modular plug point with PVC insulated 2.5 sq. mm. copper conducto r wires for phase & neutral, 650 V grade including earthing, the third pin with 1.5 sq. mm copper conductor earthing insulated cont i nuity wire, complete with providing and fixing of 5 pin 6A modular socket and 10 A modular switch (1 plug point per circuit) as pe r specifications and drawings. The circuit wiring shall be with 4 sq. mm PVC copper wire from switchboard to 1st plug point for mult ip le exhaust fans in one circuit. "
70
-
185451.87
"Lighting Distribution Board / AC Distribution Board Supply , installation, testing and commissioning of TPN lighting / AC Distribut ion board of approved make as per appendix -1, with rating and feeders as per specification. The DB shall be of IP-42 protection cl ass and shall conform to IS 8623. The board shall be fitted with an acrylic door as per specifications and drawings "
-
-
-
"Type III Distribution Board : Double Door EURODB of Havells or equivalent approved make having bus bar 200 A TPN, 1 Incomer 125 A FP MCB Isolator with 125 A FP RCCB (Senstivity 100 mA) alongwith 3 numbers 63 A TPN MCB as per specification "
11
-
1174060.86
Type IV DIstribution Board : Double Door Translucent Euro DB of Havells or approved make as per appendix -1, having 100 A TPN Copper Bus bar, 1x63 A TPN MCB , 1x63 A RCCB (100 mA Sensitivity), 9x6A SP MCB & 6x20 A SP MCB as per specification
6
-
580351.07
Type V Distribution Board : Double Door, EURO DB of Havells or equivalent approved make having 200 A TPN Bus Bar, 1 x 100 A FP MCB, 1x100 A FP RCCB (100 mA Sensitivity), 9x32 A SPN Motor duty MCB as per specification
4
-
327868.9
Type -VI Light DB:-Euro DB DBOXx of Havells or equivalent make complete with bus bar, neutral links, earth links along with 1 x 6 A MCB SPN , 7x2 A SPN MCB , Digital time switch , 110 - 240 VAC 1 Phase - 2W, 1 C/O, Base/DIN based upon Lat/Long setting of locatio n working according sunrise and sunset and MNX 9-2P Power Contactors 9 A 2 Pole 1 NO or 1 NC of L&T or equivalent
10
-
162036.42
"Decorative Light fittings Supply, installation, connection, earthing and testing of the following fittings,including supply and ins tallation of drop pipes, ho oks, fittings, fixtures, nuts,bolts, supports, on walls, outlet box for regulators and all other require d materials etc. as per spec ifications, drawings and directions of the Site Engineer including cost of all labour, tools, materials etc. complete in all respect s.Make of the fittings can be the make mentioned in the respective SOR items or equivalent model from the approved make list given i n the specifications."
-
-
-
Supply and fixing of LED wall light cat. no. 35022 9W fitting of PHILLIPS or equivalent approved make complete with all accessories such as LED module, driver, optics, thermal sink, connector blocks etc including installation
19
-
47905.71
LED light fittings, Batten with 2XTLED-TMC501-2X TLED-36 W P3242 or equiavlent approved make with LEDs: Supply and fixing of wall mo unted/ suspended type weather proof light 2XTLED-TMC501-2X TLED or equiavlent approved make with LEDs, 36 W or more. LED Fitting o f PHILLIPS or equivalent approved make complete with all accessories such as LED module, driver, optics, thermal sink, connector bl oc ks etc including installation with LED of approved make.
33
-
128449.82
DN170C LED10S-6500 PSU WH:Supply and fixing of surface mounted weather proof light DN170C LED 15 W having 1000 lumens output fittin g of PHILLIPS or equivalent approved make complete with all accessories such as LED module, driver, optics, thermal sink, connector blocks etc including installation.
79
-
687490.97
LED light fittings, Recess mounting type, Sereno LED-RC869B LED 30S-6500 PSE W30L120 D8 or equivalent approved make with LEDs: Suppl y and fixing of recess mounted weather proof light Sereno LED-RC869B LED 30S-6500 PSE W30L120 D8 or equiavlent approved make with L EDs, 42 W or more, having 2950 lumens or more output. LED Fitting of PHILLIPS or equivalent approved make complete with all access or ies such as LED module, driver, optics, thermal sink, connector blocks etc including installation with LED of approved make.
12
-
98155.99
"Ceiling fan with electronic regulator & other accessories and fittings etc. of or approved make as per appendix -1 with the followi ng sweep size:- 56"" Sweep"
20
-
75669.62
12" Oscillating wall mounted bracket fan, noiseless, plastic moulded construction, rotary device for 3 step speed control integrated unit of approved make with all accessories complete in all respect.
1
-
9858.92
Supply, installation, testing and commissioning of swan neck lighting pole of 100mm nominal Diameter B class MS pipe (Height of bot tom of light fitting shall be 2 meters from FGL), having base Plate 200mmx200mmx5mm along with Flameproof (Exd IIA/IIB) and Weathe r proof 1x60W LED well glass light fitting complete with lamp and builtin control gear of approved make, including supply and instal la tion of earthing conductor of 8 SWG GI wire, nuts, bolts, Neck portion of lighting pole shall made up be of 50mm diameter GI pipe (ra dius of neck shall be 250mm). The pole shall be painted with 01 coat of primer and 02 coats of aluminium paint. The job shall al so i nclude supply and installation of 4 way Flameproof/weather proof junction box(with 4 cable entries) having minimum 4 Nos., 6A, 440V shrouded terminal, with double compression FLP glands/lugs with looping arrangement and supply and termination of 3C X 2.5 sq. mm. a rmoured copper PVC/XLPE insulated cable from JB to light fitting The job complete in all respects as per specifications, drawi ngs an d instructions of EIC / Site engineer.
72
-
2211296.4
Supply, installation, testing and commissioning of swan neck lighting pole of 100mm nominal Diameter B class MS pipe (Height of bot tom of light fitting shall be 5 meters from FGL), having base Plate 200mmx200mmx5mm along with Flameproof (Exd IIA/IIB) and Weath e rproof 2x18W LED well glass light fitting complete with lamp and builtin control gear of approved make, including supply and insta ll ation of earthing conductor of 8 SWG GI wire, nuts, bolts, Neck portion of lighting pole shall made up be of 50mm diameter GI pip e(r adius of neck shall be 250mm). The pole shall be painted with 01 coat of primer and 02 coats of aluminium paint. The job shall a lso include supply and installation of 4 way Flameproof/weather proof junction box(with 4 cable entries) having minimum 4 Nos., 6A, 440V shrouded terminal, with double compression FLP glands/lugs with looping arrangement and supply and termination of 3C X 2.5 sq. mm. armoured copper PVC/XLPE insulated cable from JB to light fitting The job complete in all respects as per specifications, drawi ngs a nd instructions of EIC / Site engineer
26
-
772116.5
"Exhaust fan Supply, installation, testing of single phase 230 V, industrial type heavy duty exhaust fan of GEC/Usha/Crompton Greave s or of appro ved make as per appendix -1 fitted/ provided with louvres, supports etc. including making the required opening on wall s, fixing and connecting the wires etc. including earthing the body of the fan, making good the opening on the wall etc. complete as per specifica tions, drawings and direction of Site Engineer including the cost of all labour, tools, materials etc. complete."
-
-
-
18" Sweep
7
-
78498.41
12" Sweep
29
-
200661.63
"PVC Conduit pipes Supply, installation, fixing in position, PVC conduit pipes, of ISI marked , in concrete, brick work etc. during or after constructi on by making grooves in the wall, ceiling etc. cutting threads and jointing the pipes with PVC couplers, providi ng necessary tees, b ends, junction boxes etc. with 12 SWG GI wire inside conduit without joint for concealed wiring, including maki ng good the concrete, brick work, surfaces etc. complete as per drawings and direction of Site Engineer / Engineer-in-charge includ ing cost of all labour , materials etc."
-
-
-
19 mm
1109
-
137182.63
25 mm
400
-
69955.12
32 mm
223
-
45791.62
"Supplying and laying reinforced cement concrete light duty hume pipe, non pressure type (NP3), centrifugally cast conforming to I. S.458 with 1:3:6 concrete casing at joints as required with necessary slope including excavation, backfilling, supply of collars, j ointing of pipes with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement: 2 fine sand), testing of joints, complet e in all respects as per specifications, drawing and the direction of the EIC/Site Engineer:- 300 mm dia"
30
-
91656.97
"Supply, installation and testing of Lightning arrestor on top of the MOV buiding or MOV CP buiding for diverting lightning surges t o the ground. The work shall include supply of 1.2 Meter long copper lightning arrestor with 5 spronged phenyl rod base plate etc. c omplete with necessary insulators including supply and fixing of 50 x 6 mm GI earthing strip of required length and connection to th e main earthing grid . "
13
-
71325.02
"Supply fixing and erection of moidular cable transit (MCT) for cable entry to building in proper frame including supply of peelable type, spare block, stay plates compression wedgs etc. with all accessories as per specification considering 20 % minimum spare in e ach module to be installed as per instruction of Engineer in charge/ site engineer :- Galvanised mild steel frame with packing spa ce of Min.120x240 mm with multi diameter blocks and accessories with peeling off arrange ment to adjust cable size from 3.5mm to 99m m outer dia"
8
-
394690.46
Mechanical - Mainline SERVICES
-
-
-
Equipment installation
-
-
-
Above Ground Equipment Installation: Taking delivery and transportation of equipments from designated Centralized warehouse location within the state (Details of warehouse given in SCC),, placing on pre-constructed foundations, assembling together all sub-assemblie s, levelling, alignment, grouting, cleaning and flushing by water, draining, checking, testing, dressing and making good of the foun dation and completing the work in all respects in accordance with the relevant drawings, manufacturer's installation instruction, s pecifications and instructions of Site Engineer / EIC.
-
-
-
Scrapper Launching Barrel 12”x16”x600#
1
-
147779.21
10"X14" x 600# Scrapper Launching Barrel
4
-
424733.59
12" Insulating Coupling 600#
1
-
16215.18
10" Insulating Coupling 600#
4
-
62286.21
4" x 600# Insulating Coupling
10
-
61169.08
Above ground Piping: Taking delivery & transporting of pipes from designated stock pile location /Designated godown both from outsid e & inside station premises. Taking delivery of pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designa ted location within station premises, transporting the same to site, fabrication and erection of above ground piping including cutti ng, edge preparation, bending, threading, lining up, welding and installing pipes and pipe fittings, flanges, elbows, equal and redu cing outlet tees ,concentric/eccentric reducers, y-type strainers, drain funnels, vent pipes and tapping for instruments such as pre ssure gauges, thermal relief valves, thermowells etc., installing above ground at all elevations connecting with equipment nozzles, valves, vessels, in line instruments etc., welded and threaded pipe line of different pressure ratings, flushing pipes by water afte r cleaning by compressed air, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, final clean ing-up and dispoal of wastes and surpluses including providing all inputs such as labour, material, equipments and consumables neces sary to perform the work (other than those specifically under taken by the owner in this contract) and completing the work in all re spects in accordance with the drawings, specifications and instructions of Site Engineer / EIC. Thickness and Grade mentioned in th e item are for reference only and may vary. Payment shall be based on OD
-
-
-
12.75" OD x 0.375" WT APL 5L
50
-
228384.28
4.5" OD x 0.237"WT ASTM A 106 Gr B/A333
205
-
556142.61
2.375" OD x 0.218"WT ASTM A 106 Gr B /A3
135
-
163277.72
1.315" OD x 0.179"WT ASTM A 106 Gr B /A
15
-
12502.22
Under ground piping for Process piping (with PU/3LPE Coating): Taking delivery of bare Pipes, pipe fittings, steel flanges, spiral w ound metallic gaskets & fasteners from designated location within station premises/outside stockpile loction transporting the same t o site, fabrication and erection of underground piping including cutting, edge preparation, bending, threading, lining up and weldin g, excavating, trenching in all kind of soil to specific depths as indicated in drawings and installing pipes and all types of pipe fittings like flanges, elbows, equal and reducing outlet tees, concentric/eccentric reducers, drain funnels, vent pipe and tapping f or instrument such as pessure gauges, thermal relief valves, thermowells etc., underground at elevations indicated in the drawing co nnecting with equipment nozzles, valves, vessels, in-line instruments etc.,Cleaning exposed steel surfaces of Bare Pipes, Pipe Joint s, Fittings, Flanges,equipment and valves etc. by sand blasting or with power wire brush (wherever sand blast cleaning is not possib le) free of dust, grease, mill scales etc. and applying single layer polyurethane coating(PU) using 100% solvent free elastomeric p lyurethane/ liquid epoxy, with approved materials ,Equipment etc, holiday detection of the coating, cleaning of coated pipes by wate r flushing after cleaning by compresed air,hydrostatic testing of each section to the specified pressure, draining the water, tie-in , back filling, restoration of site final cleaning up and disposal of water and surpluses, providing all inputs such as labour, mate rials equipment and consumable necessary to perform the work (other than those specifically undertaken to be supplied by the owner under the contract) and completing the work in all respects in accordance with the drawings, specifications and instructions of the Site Engineer / EIC. In case of 3LPE coated pipes, weld joints shall be PU coated.Thickness and Grade mentioned in the item are for reference only and may vary. Payment shall be based on OD Note:- Charges for applying single layer polyurethane coating(PU) using 1 00% solvent free elastomeric plyurethane/ liquid epoxy for exposed steel surfaces of Bare Pipes, Pipe Joints, Fittings, Flanges,equi pment and valves etc shall be paid under separate SOR Item.
-
-
-
12.75" OD x 0.375" WT APL 5L -U/G
50
-
296669.7
10.75"OD x 0.365" API 5L - U/G
100
-
553015.26
4.5" OD x 0.237"WT ASTM A 106 Gr B/A333 -U/G
72
-
172974.31
2.375" OD x 0.218"WT ASTM A 106 Gr B/A333 -U/G
55
-
81082.17
1.315" OD x 0.179"WT ASTM A 106 Gr B/A333 -U/G
30
-
39709.6
Valves: Taking delivery and transportation of valves of all types and pressure rating from designated location within station premi ses/ Centralized warehouse location within the state (Details of warehouse given in SCC) ,Taking delivery of from the designated loc ation within station premises, transporting the same to site, erecting above ground on preconstructed foundations or underground inc luding earth work in excavation and filling for under ground valves at elevations specified in the drawings, priming and painting of above ground valves, PU Painting of under ground portions (if applicable) including all inputs, labour, material and consumable (ot her than those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the d rawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC.
-
-
-
12"x ANSI 600# MOV F/F API 6D Ball Valve
2
-
38771.02
12"x ANSI 600# MOV W/W U/G API 6D Ball V
6
-
139575.83
12"x ANSI 600# HOV F/F API 6D Ball Valve
1
-
15508.42
10"x ANSI 600# MOV W/W U/G API 6D Ball V
9
-
174469.71
10"x ANSI 600# MOV F/F API 6D Ball Valve
4
-
64618.4
10"x ANSI 600# HOV F/F API 6D Ball Valve
4
-
51694.71
Ball Valve 4"x 600 sr. HOV F/F A/G
35
-
229727.12
Ball Valve 4"x 600 sr. HOV W/W U/G exten
30
-
246136.2
3"x ANSI 600# HOV F/F API 6D Ball Valve
2
-
8140.11
2"x ANSI 600# HOV F/F API 6D Ball Valve
66
-
179081.94
2"x ANSI 600# HOV W/W API 6D Ball/Ball V
26
-
54964.14
1"x ANSI 800# HOV W/W BS 5351 BALL VALVE
33
-
33740.73
4"x ANSI 600# F/F BS-1873/BS EN ISO 1576
25
-
164176.65
2"x ANSI 600# F/F BS-1873 GLOBE Valve
6
-
20851.31
Radiographic Inspection: Inspection of welding by radiographic method on all types of piping including processing of films and inter preting the results of weld quality and reporting the same to the Site Engineer together with recommendations as to the acceptabilit y or otherwise of the welds, submitting the finished radiographic films as may be approved or directed by Engineer-in-Charge inclusi ve of supply of all pesonnel, labour, materials, equipment, consumable, inputs, etc. and providing all services complete in all resp ects as envisaged in the contract documents. Note: i) Payment will be on the basis of number of welds of the respective size radiog raphed and shall be all inclusive for the complete job of radiographic inspection as envisaged in the contract document. ii) Radiog raphy not involving full girth weld will be paid at 50% of the rate for full girth weld for the respective size. iii) For set-on ty pe branch welding, the rate for radiography will be as applicable to the branch pipe size. iv) Repeat radiography of individual wel ds due to defective films or repair of welds shall be done at contractor's cost. In case where radiography is not possible: v) Verif ication by utrasonic testing shall be done at contractors cost. vi) Magenetic particle inspection as and where required shall be don e at Contractors cost.
-
-
-
12" NB Pipe Joints RT
1
-
3051.36
10" NB Pipe Joints RT
5
-
11543.88
2" NB Pipe Joints RT
90
-
66414.29
1" NB Pipe Joints RT
25
-
13562.63
Dismantling of Structures: Dismantling by opening joints or by gas cutting/ cold cutting (wherever required as per site condition) o f existing piping & steel structural such as HOT crane, support for pipes, pipe fittings, valves, plate forms, walkways, stairways e tc. including excavation work wherever required handling, loading into truck for purpose of weighing, shifting to the designated loc ation within the pump station premises and handing over, completing the work in all respect as per drawings, instruction of the Sit e Engineer / EIC
3
-
48806.55
Temporary Barricading: Providing Temporary Barricading made of GI/ steel sheet with angle iron frame (40x40x6) in panels of 1.5 to 2 .0m including lateral/ vertical angle bracing/ steel beam at bottom for stability, earth filling up to 300mm height above ground lev el, maintaining the barricading during construction at site, removing the same and clearing site after construction complete in all respects as per instructions of Site Engineer.
300
-
752189.82
Mechanical - Mainline Composite
-
-
-
Supply and Erection of Structural Steel: Supplying at site, steel structural items such as steel plates, bars, chequered plates, an gles, beams channels, commercial quality heavy pipes, C.I. Rollers, bolts & nuts, washers, grouting bolts, padding plates etc., fabr ication and erection of saddle supports and other type of supports for pipes manifolds and valves, fabrication and erection of platf orms walkways, stairways etc., sand blast/ power brush cleaning, priming and painting the finished structures including supply of al l other inputs such as labour, materials, consumable etc. necessary to perform and complete the work in all respect, in accordance w ith drawings, specifications and instructions of the Site Engineer / EIC.
11
-
1332845.07
Supply and Erection of Electroforged Grating Supplying at site, steel structural items such as steel plates, bars, fabrication of g ratings by electroforged method, after complete fabrication entire gratings shall be Hot Dip galvanized, gratings shall be normany of size 810mm X 250mm for steps and 1200mm X 1000 mm or 810mm X 1000 mm for platforms / walkways, or any size as advised by EIC. Pla cing gratings in a replaceable mannerbolting with base frame of ISA by suitable GI clamps and GI fasteners, including supply of all other inputs such as labour, materials, consumable etc. necessary to perform and complete the work in all respect, in accordance wit h drawings, specifications and instructions of the Site Engineer / EIC.
4
-
820535.14
Supply and Erection of GI Structural Supplying at site, GI structural items such as flat, bars, chequered plates, angles, beams cha nnels, commercial quality pipes,bolts & nuts, washers, grouting bolts, fabrication and erection of various structures items includin g supply of all other inputs such as labour, materials, consumable etc. necessary to perform and complete the work in all respect, i n accordance with drawings, specifications and instructions of the Site Engineer / EIC.
8
-
1591.4
Painting: Cleaning exposed steel surfaces of piping, equipment and valves etc. by abrasive blasting or with power wire brush (where ver abrasive blast cleaning is not possible) free of dust, grease, mill scales etc. priming with one coat of primer and painting th e surfaces with two coats as per specification, with approved materials, paints, brushes, labour, equipment etc. and completing the job in all respects as per specification and instructions of the Site Engineer / EIC. All materials including supply of paint are i n the scope of contractor.
-
-
-
Zinc Ethyl Slicate Primer
300
-
173810.46
High Build EPOXY MIO
300
-
125493
Isocynate Aliphatic Poly Urethene(PU)
300
-
159346.02
PU /liquid epoxy Coating of under ground piping: Cleaning exposed steel surfaces of piping, equipment and valves etc. by abrasive b lasting or with power wire brush (whereverabrasive blast cleaning is not possible) free of dust, grease, mill scales etc. and apply ing polyurethane coating(PU) using 100% solvent free elastomeric plyurethane/ liquid epoxy, with approved materials, labour, equipme nt etc. and completing the job in all respects as per specification and instructions of the Site Engineer / EIC. All materials incl uding supply of paint are in the scope of contractor.
65
-
156796.28
Copper Strips/ Flats for Jumpers for Flanged Joits of the Product Process Piping: Supply and Installation of one copper jumper per flanged joint across the flanged joints for valves, spool piece, branch offs etc., of product process piping, The job includes cutt ing drilling of holes of required size in the copper strips/ flats for bolting purpose and complete the works in all respects as per specifications & drawings and instructions of Site Engineer/ EIC. Note:- Copper jumpers shall be installed in all the flanged join ts of Product Process piping only and not in fire water lines.
-
-
-
Up to 30 mm wide x 3 mm thick Copper strip
120
-
88082.28
30 - 50 mm wide x 3 mm thick Copper strip
60
-
70687.43
Mechanical - Mainline Supply
-
-
-
Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical s pecifications from approved vendors specified in tender document.
-
-
-
Fasteners for Flanges 3" x 600# ( 0.75" Dia. X 6.75" Length ) - extended stud length for flanges with spectacle blind
1
-
772.86
Fasteners for Flanges 12" x 600# (1.250
6
-
3830.56
Fasteners for Flanges 10" x 600# (1.25
3
-
2622.43
Fasteners for Flanges 10" x 600# (1.250
10
-
6970.85
Fasteners for Flanges 4" x 600# ( 0.87
7
-
2501.21
Fasteners for Flanges 4" x 600# (0.875"
45
-
13516.07
Fasteners for Flanges 3" x 600# ( 0.75
8
-
1250.42
Fasteners for Flanges 3" x 600# (0.750"
3
-
388.87
Fasteners for Flanges 2" x 600# ( 0.62
48
-
6768.48
Fasteners for Flanges 2" x 600# ( 0.625" Dia. X 5.75" Length ) - extended stud length for flanges with spectacle blind
63
-
7112.85
Supply and delivery of Steel Flanges at respective stations as per Station wise Break up of material supply and as per technical spe cifications from approved vendors specified in tender document. Cost shall be inclusive of all chages including charges for inpsecti on of materials by approved TPI, Taxes etc.
-
-
-
3", WNRF FLANGE, ANSI - 600# (B 16.5)
7
-
32742.81
2", WNRF FLANGE, ANSI - 600# (B 16.5)
4
-
9352.54
12", BLRF FLANGE, ANSI - 600# (B 16.5)
101
-
114343.68
4", BLRF FLANGE, ANSI - 600# (B 16.5)
1
-
28633.29
2", BLRF FLANGE, ANSI - 600# (B 16.5)
5
-
24238.2
2", BLRF FLANGE, ANSI - 600# (B 16.5)
43
-
42670.31
1", BLRF FLANGE, ANSI - 600# (B 16.5)
25
-
13661.74
SPECTACLE BLINDS:Supply and delivery of following mentioned Spectacle Blinds at respective stations as per Station wise Break up of material supply and as per technical specifications indicated in tender documents.
-
-
-
12" Spectacle Blind 600# F/F A/G - ASTM
2
-
147839.58
4" Spectacle Blind 600# F/F A/G - ASTM
9
-
154918.83
2" Spectacle Blind 600# F/F A/G - ASTM
6
-
62758.82
Supply and delivery of pipe fittings at respective stations as per Station wise Break up of material supply and as per technical sp ecifications from approved vendors specified in tender document. Cost shall be inclusive of all chages including charges for inpsec tion of materials by approved TPI, Taxes etc.
-
-
-
4" SWMG ANSI 600#
7
-
5622.33
2" SWMG ANSI 600#
8
-
1868.18
12" x 4" ANSI 150# Un Equal Tee
4
-
38124.38
12" x 8" ANSI 600# Un Equal Tee cross ba
1
-
21819.99
4"x2" 600# Unequal Tee
22
-
34999.53
4" 600# Equal Tee
2
-
3296.66
12" x 8" ANSI 600# Un Equal Tee cross ba
5
-
2325.37
4" ANSI 600# 90 deg LR Bends
15
-
29357.22
2" ANSI 600# 90 deg LR Bends
2
-
1116.02
1" ANSI 600# 90 deg LR Bends
2
-
664.1
4"x2" 600# Unequal Tee
2
-
404.53
1" 3000 lbsHALF COUPLING
20
-
4018.84
4" 600# Equal Tee
1
-
4094.77
1" ANSI 600# Equal Tee
1
-
4228.53
4" ANSI 600# 90 deg LR Bends
1
-
6952.36
1" 3000 lbsHALF COUPLING
12
-
80035.72
Supply of ASTM A333 Gr.6 pipes at respective stations as per Station wise Break up of material supply and as per technical specific ations from approved vendors specified in tender document. Cost shall be inclusive of all chages including charges for inpsection o f materials by approved TPI, Taxes etc.
-
-
-
4.500" ODx 0.237" WT (Sch.STD) ASTM A 333 Gr 6 bare Pipe
313
-
591915.36
2.375" ODx 0.218" WT (Sch.XS) ASTM A 333 Gr 6 bare pipe
200
-
148130.12
1.315" ODx 0.179"WT (Sch.XS) ASTM A 333 Gr 6 Bare pipe
25
-
10507.61
" Supply of Valves at respective stations as per technical specifications from approved vendors in the tender document - Globe Valve s "
-
-
-
4"x ANSI 600# F/F BS-1873 GLOBE Valve
4
-
265107.63
2"x ANSI 600# F/F BS-1873 GLOBE Valve
6
-
158520.42
Supply and delivery of API 6D Ball valves for use in process piping at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document.
-
-
-
API 6D Ball Valve 4"x 600 sr. HOV F/F A/G
2
-
54964.35
API 6D Ball Valve 4"x 600 sr. HOV W/W U/G extended stem
6
-
162801.41
API 6D Ball Valve 4"x 600 sr. HOV F/F A/
5
-
329786.05
API 6D Ball Valve 4"x 600 sr. HOV W/W U/
5
-
271335.87
1" x 800# Ball valve HOV W/W ISO 17292
3
-
40561.32
Mechanical - CSW- Services
-
-
-
Insulating Coupling Erection: Taking delivery and transportation of equipments from designated Centralized warehouse location within the state (Details of warehouse given in SCC), and installation of Insulating Couplings of the following sizes and pressure class, at elevations specified in the drawing, checking resistance value by meggar test before and after erection levelling, aligning and c hecking, making welded connections to the piping, coating & wrapping and completing the work in all respects in accordance with the relevant drawings, manufacturer's installation instructions, specifications and instructions of Site Engineer / EIC.
-
-
-
Insulating coupling : 8" x 300#
3
-
36697.37
Above Ground Equipment Installation: Taking delivery and transportation of equipments from designated Centralized warehouse location within the state (Details of warehouse given in SCC),, placing on pre-constructed foundations, assembling together all sub-assemblie s, levelling, alignment, grouting, cleaning and flushing by water, draining, checking, testing, dressing and making good of the foun dation and completing the work in all respects in accordance with the relevant drawings, manufacturer's installation instruction, s pecifications and instructions of Site Engineer / EIC. Note: Weight of equipment is indicative only, Payment shall be done based on actual weight of equipment.
-
-
-
Single Basket Type Strainer - 8"x600#
6
-
244079.39
Above ground Piping: Taking delivery & transporting of pipes from designated stock pile location /Designated godown both from outsid e & inside station premises. Taking delivery of pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designa ted location within station premises, transporting the same to site, fabrication and erection of above ground piping including cutti ng, edge preparation, bending, threading, lining up, welding and installing pipes and pipe fittings, flanges, elbows, equal and redu cing outlet tees ,concentric/eccentric reducers, y-type strainers, drain funnels, vent pipes and tapping for instruments such as pre ssure gauges, thermal relief valves, thermowells etc., installing above ground at all elevations connecting with equipment nozzles, valves, vessels, in line instruments etc., welded and threaded pipe line of different pressure ratings, flushing pipes by water afte r cleaning by compressed air, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, final clean ing-up and dispoal of wastes and surpluses including providing all inputs such as labour, material, equipments and consumables neces sary to perform the work (other than those specifically under taken by the owner in this contract) and completing the work in all re spects in accordance with the drawings, specifications and instructions of Site Engineer / EIC. Thickness and Grade mentioned in th e item are for reference only and may vary. Payment shall be based on OD
-
-
-
10.75" OD x 0.365" APL 5L
258
-
1302296.9
8.625" OD x 0.322" / 0.375" / 0.438" WT
714
-
2881671.16
6.625" OD x 0.280" ASTM A 106 Pipe/A333
135
-
503902.54
4.5" OD x 0.237"WT ASTM A 106 Gr B/A333
23
-
62396.49
3.5" OD x 0.216"WT ASTM A 106 Gr B /A333
150
-
273788.91
2.375" OD x 0.218"WT ASTM A 106 Gr B /A3
350
-
423312.61
1.315" OD x 0.179"WT ASTM A 106 Gr B /A
350
-
291718.42
Above ground internal epoxy coated pipe for Fire Water Services: (with internal epoxy coating for repair at wending joints, Flanges & Fittings ) Taking delivery of internal epoxy coated pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fastene rs from designated location within station premises/Centralized warehouse within the state (as applicble) , transporting the same to site, fabrication and erection of above ground piping including cutting, edge preparation, bending, threading, lining up, welding and installing pipes and pipe fittings, flanges, elbows, equal and reducing outlet tees, concentric/eccentric reducers, y-type stra iners, drain funnels, vent pipes and tapping for instruments such as pressure gauges, thermal relief valves, thermowells etc., inst alling above ground at all elevations connecting with equipment nozzles, valves, vessels, in line instruments etc., welded an d threaded pipe line of different pressure ratings, flushing pipes by water after cleaning by compressed air, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, final cleaning-up and disposal of wastes and surpluses includin g providing all inputs such as labour, material, equipments and consumables necessary to perform the work (other than those specific ally under taken by the owner in this contract).The scope shall also include cleaning of internal surface of pipes conforming to SSP C SP-10 of flanges, fittings and at all location where coating has been distroyed due to welding and repairing the internal surface by application of 2-pack cold cured Isophthalic polyster acrylic co-polymer glass flake filled /Liquid epoxy / Equivalent with coati ng of thickness 700-1000 Microns. The locations where internal coating repair is expected would be at pipe end, Flanges ,pipe fitti ngs ,valve location so that the internal of pipe surface is not directly exposed to water and completing the work in all respects in accordance with the drawings, specifications and instructions of Site Engineer / EIC. Note:- 1) Charges for supply of pipe with in ternal coating shall be paid under separate SOR items.
-
-
-
12.75" ODx 0.250" WT IS3589 FE410 Pipe
1500
-
6485156.1
4.5" ODx 0.237" WT ASTM A 106 Gr B Pipe
300
-
502570.26
Under ground piping for Process piping (with PU/3LPE Coating): Taking delivery of bare Pipes, pipe fittings, steel flanges, spiral w ound metallic gaskets & fasteners from designated location within station premises/outside stockpile loction transporting the same t o site, fabrication and erection of underground piping including cutting, edge preparation, bending, threading, lining up and weldin g, excavating, trenching in all kind of soil to specific depths as indicated in drawings and installing pipes and all types of pipe fittings like flanges, elbows, equal and reducing outlet tees, concentric/eccentric reducers, drain funnels, vent pipe and tapping f or instrument such as pessure gauges, thermal relief valves, thermowells etc., underground at elevations indicated in the drawing co nnecting with equipment nozzles, valves, vessels, in-line instruments etc.,Cleaning exposed steel surfaces of Bare Pipes, Pipe Joint s, Fittings, Flanges,equipment and valves etc. by sand blasting or with power wire brush (wherever sand blast cleaning is not possib le) free of dust, grease, mill scales etc. and applying single layer polyurethane coating(PU) using 100% solvent free elastomeric p lyurethane/ liquid epoxy, with approved materials ,Equipment etc, holiday detection of the coating, cleaning of coated pipes by wate r flushing after cleaning by compresed air,hydrostatic testing of each section to the specified pressure, draining the water, tie-in , back filling, restoration of site final cleaning up and disposal of water and surpluses, providing all inputs such as labour, mate rials equipment and consumable necessary to perform the work (other than those specifically undertaken to be supplied by the owner under the contract) and completing the work in all respects in accordance with the drawings, specifications and instructions of the Site Engineer / EIC. In case of 3LPE coated pipes, weld joints shall be PU coated.Thickness and Grade mentioned in the item are for reference only and may vary. Payment shall be based on OD Note:- Charges for applying single layer polyurethane coating(PU) using 1 00% solvent free elastomeric plyurethane/ liquid epoxy for exposed steel surfaces of Bare Pipes, Pipe Joints, Fittings, Flanges,equi pment and valves etc shall be paid under separate SOR Item.
-
-
-
12.75" OD x 0.375" WT APL 5L -U/G
50
-
296669.7
8.625" OD x 0.322" / 0.375" / 0.438" WT
17
-
69220.44
6.625" OD x 0.280" ASTM A 106 Gr B/A333
30
-
98424.74
4.5" OD x 0.237"WT ASTM A 106 Gr B/A333
27
-
64865.37
3.5" OD x 0.216"WT ASTM A 106 Gr B/A333
30
-
61542.9
2.375" OD x 0.218"WT ASTM A 106 Gr B/A33
30
-
44226.64
1.315" OD x 0.179"WT ASTM A 106 Gr B/A3
30
-
39709.6
Under ground piping for Fire Water Services:(with internal epoxy coating for repair at welding joints, flanges and fittings) Taking delivery of bare Pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location within sta tion premises/from centralized wearhouse within the state (as applicable) transporting the same to site, fabrication and erection of underground piping including cutting, edge preparation, bending, threading, lining up and welding, excavating, trenching in all kin d of soil to specific depths as indicated in drawings and installing pipes and all types of pipe fittings like flanges, elbows, equa l and reducing outlet tees, concentric/eccentric reducers, drain funnels, vent pipe and tapping for instrument such as pessure gauge s, thermal relief valves, thermowells etc., underground at elevations indicated in the drawing connecting with equipment nozzles, va lves, vessels, in-line instruments etc., cleaning of coated pipes by water flushing after cleaning by compresed air,hydrostatic test ing of each section to the specified pressure, draining the water, tie-in, back filling, restoration of site final cleaning up and d isposal of water and surpluses, providing all inputs such as labour, materials equipment and consumable necessary to perform the wor k (other than those specifically undertaken to be supplied by the owner under the contract) .The scope shall also include cleaning of internal surface of pipes conforming to SSPC SP-10 of Flanges, fiitings and at all location where coating has been distroyed due to welding and repairing the internal surface by application of 2-pack cold cured Isophthalic polyster acrylic co-polymer glass flak e filled /Liquid epoxy / Equivalent with coating of thickness as per specifications. The locations where internal coating repair is expected would be at pipe end, Flanges ,pipe fittings ,valve location so that the internal of pipe surface is not directly exposed to water and completing the work in all respects in accordance with the drawings, specifications and instructions of Site Engineer / EIC. Note:- 1) Charges for applying polyurethane coating(PU) for exposed steel surfaces of Bare Pipes, Pipe Joints, Fittings, Flan ges,equipment and valves etc shall be paid under separate SOR Item. 2) Charges for supply of pipe with internal coating shall be pa id under separate SOR items.
-
-
-
12.75" ODx 0.250" WT IS3589 FE410 Pipe-U/G
100
-
717704.32
4.5" ODx 0.237" WT ASTM A 106 Gr B Pipe-U/G
20
-
52160.01
"Above ground piping for Air line: Taking delivery of pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fastener s from designated location within station premises, transporting the same to site, fabrication and erection of above ground piping i ncluding cutting, edge preparation, bending, threading, lining up, welding and installing pipes and pipe fittings, flanges, elbows , equal and reducing outlet tees, concentric reducers, drain funnels, vent pipes and tapping for instruments such as pressure gauges , thermal relief valves, thermowells etc., installing above ground at all elevations connecting with equipment nozzles, valv es, vessels, in line instruments etc., welded and threaded pipe line of different pressure ratings, flushing pipes by water after cl eaning by compressed air including air cleaning prior to installation of valve by card board/ Tin blasting method, hydrostatic testi ng of each section to the specified pressure, draining the water, tie-in, final cleaning-up and disposal of wastes and surpluses inc luding providing all inputs such as labour, material, equipments and consumables necessary to perform the work (other than those spe cifically under taken by the owner in this contract).completing the work in all respects in accordance with the drawings, specificat ions and instructions of Site Engineer / EIC."
-
-
-
2.375" ODx 0.218" WT ASTM A 106 Gr B Pipe F/A
150
-
214258.5
1.315" ODx 0.179" WT ASTM A 106 Gr B Pipe F/A
300
-
251247.96
"Under ground piping for Air piping: Taking delivery of pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fastene rs from designated location within station premises transporting the same to site, fabrication and erection of underground piping in cluding cutting, edge preparation, bending, threading, lining up and welding, excavating, trenching in all kind of soil to specific depths as indicated in drawings and installing pipes and all types of pipe fittings like flanges, elbows, equal and reducing outlet tees, concentric/eccentric reducers, drain funnels, vent pipe and tapping for instrument such as pessure gauges, thermal relief valv es, thermowells etc., underground at elevations indicated in the drawing connecting with equipment nozzles, valves, vessels, in-line instruments etc., cleaning the material surface by sandblast cleaning, coating and wrapping the pipes/pipe fittings with coaltar ba se tape coating material (including the supply of coating tape, precoat material etc.), holiday detection of the coating, cleaning o f coated pipes by water flushing after cleaning by compresed air prior to installation of valve, cleaning by card board/ Tin blastin g method, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, back filling, restoration of si te final cleaning up and disposal of water and surpluses, providing all inputs such as labour, materials equipment and consumable ne cessary to perform the work (other than those specifically undertaken to be supplied by the owner under the contract) and completin g the work in all respects in accordance with the drawings, specifications and instructions of the Site Engineer / EIC."
-
-
-
2.375" ODx 0.237"WT ASTM A 106 Gr B F/A/ U/G
30
-
74156.98
1.315" ODx 0.237"WT ASTM A 106 Gr B F/A/ U/G
60
-
142131.71
Valves: Taking delivery and transportation of valves of all types and pressure rating from designated location within station premi ses/ Centralized warehouse location within the state (Details of warehouse given in SCC) ,Taking delivery of from the designated loc ation within station premises, transporting the same to site, erecting above ground on preconstructed foundations or underground inc luding earth work in excavation and filling for under ground valves at elevations specified in the drawings, priming and painting of above ground valves, PU Painting of under ground portions (if applicable) including all inputs, labour, material and consumable (ot her than those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the d rawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC.
-
-
-
8"x ANSI 600# MOV F/F API 6D Ball Valve
44
-
721999
6"x ANSI 600# MOV F/F API 6D Ball Valve
5
-
61534.05
3"x ANSI 600# HOV F/F API 6D Ball Valve
3
-
12210.17
2"x ANSI 600# HOV F/F API 6D Ball Valve
30
-
81400.88
8"x ANSI 300# MOV F/F API 6D Ball Valve
30
-
443008.34
8"x ANSI 300# ROV F/F API 6D Ball Valve
6
-
99072.56
3"x ANSI 300# HOV F/F API 6D Ball Valve
6
-
26678.15
2"x ANSI 300# HOV F/F API 6D Ball Valve
35
-
128237.74
2"x ANSI 300# HOV W/W API 6D Ball Valve
3
-
10991.81
1"x ANSI 800# HOV W/W BS 5351 BALL VALVE
130
-
132918.03
2"x ANSI 300 # HOV F/F API 600 Gate-air
15
-
32946.96
1"x ANSI 800# HOV W/W API 602 Gate-air
30
-
53709.59
8"x ANSI 600# F/F API 6D Swing Check Val
4
-
96632.89
8"x ANSI 300# F/F API 6D Swing Check Va
3
-
65225.56
8" x ANSI 600# F/F Control Valve
3
-
81254.58
8" x ANSI 300# F/F Control Valve
3
-
72749.87
8"x ANSI 600 # F/F BS-1873 GLOBE Valve
5
-
69458.64
6"x ANSI 600 # F/F BS-1873 GLOBE Valve
5
-
49675.88
2"x ANSI 600# F/F BS-1873 GLOBE Valve
24
-
83405.23
8"x ANSI 300# F/F BS-1873/BS EN ISO 1576
3
-
35765.01
3"x ANSI 600# F/F BS-1873 GLOBE Valve
5
-
26064.19
3"x ANSI 300# W/W BS-1873/BS EN ISO 1576
3
-
14820.35
3"x ANSI 300# F/F BS-1873/BS EN ISO 1576
3
-
12350.32
2"x ANSI 300# F/F BS-1873/BS EN ISO 1576
14
-
38423.04
1"x ANSI 800# W/W BS-1873/BS EN ISO 1576
90
-
156748.01
1" X 1" Thermal Relief Valve F/F ANSI
43
-
106004.49
1" X 1" Thermal Relief Valve F/F ANSI
45
-
101404.01
12"x ANSI 150 # HOV F/F API 600 Gate Val
18
-
230510.71
4"x ANSI 150 # HOV F/F API 600 Gate Valv
30
-
166474.87
Monitor and Hydrant Taking delivery of hydrants and monitors rom thedesignated location, transporting the same to site, erecting ove r fire water line as per AFC drawings including all inputs, labour, material and consumable and completing the work in all respect s in accordance with the drawings ,manufacturer's installation instructions and specifications andinstructions of the Site Engineer /EIC.
-
-
-
High Volume Long Range Foam Monitor 750 GPM capacity stand post type with inlet flange of 4" X 150#
18
-
89168.07
Stand Post Type double way fire hydrent fitted with 2 Nos of single landing valve complete as per IS: 5290 alongwith 4" x150# WNRF F lange
60
-
337264.3
Radiographic Inspection: Inspection of welding by radiographic method on all types of piping including processing of films and inter preting the results of weld quality and reporting the same to the Site Engineer together with recommendations as to the acceptabilit y or otherwise of the welds, submitting the finished radiographic films as may be approved or directed by Engineer-in-Charge inclusi ve of supply of all pesonnel, labour, materials, equipment, consumable, inputs, etc. and providing all services complete in all resp ects as envisaged in the contract documents. Note: i) Payment will be on the basis of number of welds of the respective size radiog raphed and shall be all inclusive for the complete job of radiographic inspection as envisaged in the contract document. ii) Radiog raphy not involving full girth weld will be paid at 50% of the rate for full girth weld for the respective size. iii) For set-on ty pe branch welding, the rate for radiography will be as applicable to the branch pipe size. iv) Repeat radiography of individual wel ds due to defective films or repair of welds shall be done at contractor's cost. In case where radiography is not possible: v) Verif ication by utrasonic testing shall be done at contractors cost. vi) Magenetic particle inspection as and where required shall be don e at Contractors cost.
-
-
-
12" NB Pipe Joints
90
-
274622.58
10" NB Pipe Joints
75
-
173158.22
8" NB Pipe Joints
23
-
43708.97
6" NB Pipe Joints
57
-
78683.44
4" NB Pipe Joints
3
-
3920.51
3" NB Pipe Joints
180
-
156003.55
2" NB Pipe Joints
180
-
132828.59
1" NB Pipe Joints
450
-
244127.25
"Fabrication of Mitre Bends - Long Radius: (only for fire water piping) Taking delivery of pipes from designated locations, transpor ting the same to site and fabrication of carbon steel piping specials by cutting, edge preparation, welding, all types of testing in cluding radiography & including supply of all inputs such as labour, materials (other than those specifically undertaken to be suppl ied by the Owner under the contract), equipments, consumables etc. necessary to perform and completing the work in all respects in a ccordance with drawings, specifications and instructions of the Site Engineer / EIC."
-
-
-
12.75" OD More than 45 deg & up to 90 deg Bend
6
-
194998.71
Development of As Built Drawings, Data Sheets etc.: Development of as built drawings, data sheets, system details covering all addit ional facilities incorporated under this project in the station and furnishing them as reference document. Additionally, electronic copy of the documents shall also be furnished in compact disks/USB drive
1
-
290175.53
Temporary Barricading: Providing Temporary Barricading made of GI/ steel sheet with angle iron frame (40x40x6) in panels of 1.5 to 2 .0m including lateral/ vertical angle bracing/ steel beam at bottom for stability, earth filling up to 300mm height above ground lev el, maintaining the barricading during construction at site, removing the same and clearing site after construction complete in all respects as per instructions of Site Engineer.
1376
-
3450043.97
Dismantling of Structures: Dismantling by opening joints or by gas cutting/ cold cutting (wherever required as per site condition) o f existing steel structural such as support for pipes, pipe fittings, valves, plate forms, walkways, stairways etc. including excava tion work wherever required handling, loading into truck for purpose of weighing, shifting to the designated location within the pum p station premises and handing over, completing the work in all respect as per drawings, instruction of the Site Engineer / EIC.
3
-
48806.55
Dismantling of Piping (Aboveground): Dismantling of existing over ground piping works of all types and sizes by opening flange joint s or by gas cutting/ cold cutting or any other approved suitable means without damaging other portions of work. The job includes cu tting the pipes to required sizes as directed, taking out valves, flanges, tees, bends, gaskets nuts, bolts etc. attached supports a longwith any instruments such as pressure gauge, temperature gauge etc. handling, transporting and storing at owner's designated sto re in safe manner to avoid damage including supply of all labour, materials, equipments, consumables etc. necessary to perform and c omplete the work in all respects as per drawings, instructions of the Site Engineer / EIC (payment shall be made on linear measurem ent of dismantled piping including bends tees etc.). Note : The contractor shall indicate the piping system to be dismantled and sha ll take specific approval from the Site engineer before dismantling of pipe. Certain redundant pipes which in the opinion of the Own er need not be retrieived, those items shall not be dismantelled.
3
-
64933.94
Dismantling of Piping (Underground): Dismantling the existing under ground piping, locating, retrieving including excavating the pro per trenches by cutting the pipes without damaging other portions of work. The job includes cutting the pipes to required sizes as directed, taking out valves, flanges, tees, bends, gaskets, nuts, bolts etc., handling, transporting and storing at owner's designat ed store in safe manner to avoid damage including supply of all labour, materials, equipment consumables etc. necessary to perform a nd complete the work in all respects as per drawing, instructions of the Site Engineer / EIC. (Payment shall be made on the linear m easurement of dismantled piping including bend, tees, reducers etc.). Note : The contractor shall indicate the piping system to be d ismantled and shall take specific approval from the Site engineer before dismantling of pipe.Certain redundant pipes which in the op inion of the Owner need not be retrieived, those items shall not be dismantled.
3
-
90781.25
Piping Modification: Carrying out modification in already fabricated and/ or erected pipe due to change in drawing or as required by site condition, taking delivery of pipe, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated l ocation within station premises, transporting the same to site, cutting of pipe and / or weld joint , edge preparation, bending, lin ing up, welding and installing pipes and pipe fittings, flanges, elbows, equal and reducing outlet tees, concentric/eccentric reduce rs, y-type strainers, drain funnels, vent pipes and tapping for instruments such as pressure gauges, thermal relief valves, thermowe lls etc., installing above ground at all elevations connecting with equipment nozzles, valves, vessels, in line instruments etc., we lded and threaded pipe line of different pressure ratings, flushing pipes by water after cleaning by compressed air, hydrostatic tes ting of each section to the specified pressure, draining the water, tie-in, final cleaning-up and dispoal of wastes and surpluses in cluding providing all inputs such as labour, material, equipments and consumables necessary to perform the work (other than those sp ecifically under taken by the owner in this contract) and completing the work in all respects in accordance with the drawings, speci fications and instructions of Site Engineer / EIC. (Item is to be operated upon approval of SIte Enginner, Item covers only modifica tion / rework jobs.)
-
-
-
Pipe size 3 inch NB to 6 Inch NB
60
-
34655.89
Pipe size 8 inch NB and above
60
-
34655.89
Mechanical - CSW- Composite
-
-
-
Supply and Erection of Structural Steel: Supplying at site, steel structural items such as steel plates, bars, chequered plates, an gles, beams channels, commercial quality heavy pipes, C.I. Rollers, bolts & nuts, washers, grouting bolts, padding plates etc., fabr ication and erection of saddle supports and other type of supports for pipes manifolds and valves, fabrication and erection of platf orms walkways, stairways etc., sand blast/ power brush cleaning, priming and painting the finished structures including supply of al l other inputs such as labour, materials, consumable etc. necessary to perform and complete the work in all respect, in accordance w ith drawings, specifications and instructions of the Site Engineer / EIC.
3
-
363503.2
Supply and Erection of Electroforged Grating Supplying at site, steel structural items such as steel plates, bars, fabrication of g ratings by electroforged method, after complete fabrication entire gratings shall be Hot Dip galvanized, gratings shall be normany of size 810mm X 250mm for steps and 1200mm X 1000 mm or 810mm X 1000 mm for platforms / walkways, or any size as advised by EIC. Pla cing gratings in a replaceable mannerbolting with base frame of ISA by suitable GI clamps and GI fasteners, including supply of all other inputs such as labour, materials, consumable etc. necessary to perform and complete the work in all respect, in accordance wit h drawings, specifications and instructions of the Site Engineer / EIC.
3
-
615401.35
Supply and Erection of GI Structural Supplying at site, GI structural items such as flat, bars, chequered plates, angles, beams cha nnels, commercial quality pipes,bolts & nuts, washers, grouting bolts, fabrication and erection of various structures items includin g supply of all other inputs such as labour, materials, consumable etc. necessary to perform and complete the work in all respect, i n accordance with drawings, specifications and instructions of the Site Engineer / EIC.
26
-
5172.03
Painting: Cleaning exposed steel surfaces of piping, equipment and valves etc. by abrasive blasting or with power wire brush (where ver abrasive blast cleaning is not possible) free of dust, grease, mill scales etc. priming with one coat of primer and painting th e surfaces with two coats as per specification, with approved materials, paints, brushes, labour, equipment etc. and completing the job in all respects as per specification and instructions of the Site Engineer / EIC. All materials including supply of paint are i n the scope of contractor.
-
-
-
Zinc Ethyl Slicate Primer
2800
-
1622230.96
High Build EPOXY MIO
2800
-
1171268
Isocynate Aliphatic Poly Urethene(PU)
2800
-
1487229.52
PU /liquid epoxy Coating of under ground piping: Cleaning exposed steel surfaces of piping, equipment and valves etc. by abrasive b lasting or with power wire brush (whereverabrasive blast cleaning is not possible) free of dust, grease, mill scales etc. and apply ing polyurethane coating(PU) using 100% solvent free elastomeric plyurethane/ liquid epoxy, with approved materials, labour, equipme nt etc. and completing the job in all respects as per specification and instructions of the Site Engineer / EIC. All materials incl uding supply of paint are in the scope of contractor.
600
-
1447350.24
Copper Strips/ Flats for Jumpers for Flanged Joits of the Product Process Piping: Supply and Installation of one copper jumper per flanged joint across the flanged joints for valves, spool piece, branch offs etc., of product process piping, The job includes cutt ing drilling of holes of required size in the copper strips/ flats for bolting purpose and complete the works in all respects as per specifications & drawings and instructions of Site Engineer/ EIC. Note:- Copper jumpers shall be installed in all the flanged join ts of Product Process piping only and not in fire water lines.
-
-
-
Up to 30 mm wide x 3 mm thick Copper str
150
-
110102.85
30 - 50 mm wide x 3 mm thick Copper stri
150
-
176718.57
Medium Velocity Water Sprinkler System: Design, Detailed Engineering, supply, fabrication, erection/Installation and commissioning of complete medium velocity water sprinkler systems for Pump Shed, barrel area, filteration, metering and piping area at each locati on as per the details mentioned below: Design, detail engineering, drawing and development of scheme for automatic medium velocity water sprinkler system for the equipment andpiping area including supply of all material like Deluge valve(Wet Type/ Dry Type), Spra y nozzles, pressure switch, pressuer gauge, piping,valves, flanges, coupling, pipe fittings, brackets, clamps, fasteners, solenoid s witches, S.S piping, strainers, alongwith all accessories asper the approved scheme at site, erection and installation of piping,cab ling, equipments and instruments control panel etc, provision ofcompressed air/pneumatic piping from owner's compressed air headerlo cated near compressor room for Dry Type Deluge Valve includingdismantling, breaking of road etc.as required for setting out of thesy stem and making good the same,hooking up the system with the hydrantnetwork,sand blast cleaning, priming and painting (Zinc Ethyl Sl icatePrimer,High Build EPOXY MIO, Isocynate Aliphatic Poly Urethene(PU) insignal red colour); internal coating with liquid epoxy, Ca rrying outall electrical and instrumentation works to enable auto actuation of the deluge valve and medium velocity water sprinkler system based onalarm signal from QB sensors/ gas detectors/ flame detectors. Carryingout the electronic integration of the system wi th the control panel andproviding alarm and automatic actuation of the deluge valves withmanual over-ride provision, testing & commi ssioning of the systemincluding cost of all labour, services, materials tools & tackles consumables, first operation & funrnishing o f operation and maintenancemanuals on lumpsum basis as per specifications, International standard procedures, approved scheme, drawi ngs and the direction of SiteEngineer /EIC. Note:1. The control panel and control cosole with PC will be installed underthe work of Gas detection system and the MV system is to be integratedwith the exisitng system. 2. For System Designing/Area Calculation & inte r distances between block facilities refer the General layout plan and Assembly Piping Areaof respective Station. 3.Medium Velocity Water Sprinkler System for T-points at shall be designed considering wet type Deluge Valve as no compressed air is available at the se locations.
-
-
-
Medium Velocity Water Sprinkler System for Station consisting of Barrel area, filteration, metering and piping area etc IOC GORAKHPU R - 1 NO. HPCL GORAKHPUR - 1 NO. BPCL GORAKHPUR/BAITALPUR - 1 NO.
1
-
2868317.1
Mechanical - CSW- Supply
-
-
-
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document.
-
-
-
12" SWMG ANSI 150#
265
-
149251.71
12" SWMG ANSI 150#
8
-
1781.71
8" SWMG ANSI 300#
9
-
6456.43
4" SWMG ANSI 150#
30
-
19747.54
4" SWMG ANSI 300#
10
-
5012.29
3" SWMG ANSI 300#
3
-
972.69
6" SWMG ANSI 300#
17
-
2707.3
1" SWMG ANSI 300#
12
-
1074.6
8" SWMG ANSI 600#
11
-
10974.85
4" SWMG ANSI 300#
2
-
1958.28
3" SWMG ANSI 600#
1
-
404.86
2" SWMG ANSI 300#
10
-
2335.22
1" SWMG ANSI 600#
4
-
512.78
Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical s pecifications from approved vendors specified in tender document.
-
-
-
12" x 150# (0.875" Dia. X 5.50" Length )
886
-
148154.97
12" x 150# (0.875" Dia. X 5.50" Length )
798
-
61084.19
8" x 300# (0.875" Dia. X 6.25" Length)
151
-
40979.62
4" x 150# (0.625" Dia. X 4.00" Length )
73
-
24322.49
6" x 300# (0.750" Dia. X 5.25" Length)
288
-
40454.55
8" x 300# (0.875" Dia. X 6.25" Length)
72
-
12004.85
4" x 300# (0.75" Dia. X 5.00" Length )
12
-
1616.08
Fasteners for Flanges 8" x 300# (0.875" Dia. X 7.5" Length) - extended stud length for flanges with spectacle blind
30
-
4595.27
3" x 300# (0.75" Dia. X 4.75" Length )
50
-
5038.01
6" x 300# (0.750" Dia. X 5.25" Length)
127
-
9773.87
Fasteners for Flanges 2" x 300# (0.625"
144
-
14935.97
Fasteners for Flanges 6" x 300# (0.750" Dia. X 6.25" Length) - extended stud length for flanges with spectacle blind
183
-
12619.53
Fasteners for Flanges 8" x 600# (1.125
38
-
21551
Fasteners for Flanges 4" x 300# (0.75" Dia. X 5.75" Length ) - extended stud length for flanges with spectacle blind
108
-
47544.04
Fasteners for Flanges 6" x 600# (1.0"
5
-
1696.72
3" x 300# (0.75" Dia. X 4.75" Length )
19
-
5255.47
Fasteners for Flanges 3" x 600# ( 0.75
2
-
312.61
Fasteners for Flanges 2" x 300# /1" x 300# extended stud length for flanges with spectacle blind (0.625" Dia. X 4" Length )
11
-
1425.85
Fasteners for Flanges 2" x 300# (0.625" Dia. X 4.75" Length ) - extended stud length for flanges with spectacle blind
18
-
2538.18
1" x 300# (0.625" Dia. X 3.50" Length )
69
-
7790.27
Fasteners for Flanges 8" x 600# (1.125" Dia. X 10" Length) - extended stud length for flanges with spectacle blind
36
-
4610.35
Fasteners for Flanges 1" x 600# (0.625" Dia. X 5.0" Length ) - extended stud length for flanges with spectacle blind
14
-
1272.37
Supply and delivery of Steel Flanges at respective stations as per Station wise Break up of material supply and as per technical spe cifications from approved vendors specified in tender document. Cost shall be inclusive of all chages including charges for inpsecti on of materials by approved TPI, Taxes etc.
-
-
-
8", WNRF FLANGE, ANSI - 300# (B 16.5)-A
18
-
146646.48
6", WNRF FLANGE, ANSI - 300# (B 16.5)-A
30
-
156658.45
6", WNRF FLANGE, ANSI - 300# (B 16.5)-A
5
-
13481.62
3", WNRF FLANGE, ANSI - 300# (B 16.5)-A
8
-
12774.87
4", WNRF FLANGE, ANSI - 300# (B 16.5)-A
63
-
49229.43
3", WNRF FLANGE, ANSI - 300# (B 16.5)-A
22
-
15551.86
8", WNRF FLANGE, ANSI - 600# (B 16.5)
14
-
202954.31
2", WNRF FLANGE, ANSI - 300# (B 16.5)-A
20
-
195588.3
3", WNRF FLANGE, ANSI - 600# (B 16.5)
8
-
18705.08
1", WNRF FLANGE, ANSI - 300# (B 16.5)-A
10
-
11321.16
1", WNRF FLANGE, ANSI - 600# (B 16.5)
4
-
2919.84
8", WNRF FLANGE, ANSI - 600# (B 16.5)
15
-
118133.34
4", BLRF FLANGE, ANSI - 150# (B 16.5)
30
-
32618.62
6", WNRF FLANGE, ANSI - 600# (B 16.5)
18
-
109485.19
6", BLRF FLANGE, ANSI - 300# (B 16.5)-A
3
-
17051.26
3", WNRF FLANGE, ANSI - 600# (B 16.5)
6
-
19578.82
3", BLRF FLANGE, ANSI - 300# (B 16.5)-A
1
-
1892.09
12", BLRF FLANGE, ANSI - 150# (B 16.5)
13
-
10772.82
1", BLRF FLANGE,ANSI - 300# (B 16.5)-AS
10
-
3896.83
4", BLRF FLANGE, ANSI - 150# (B 16.5)
2
-
57266.58
10", BLRF FLANGE, ANSI - 600# (B 16.5)
12
-
280860.2
8", BLRF FLANGE, ANSI - 300# (B 16.5)-A
24
-
247056.03
6", BLRF FLANGE, ANSI - 600# (B 16.5)
3
-
26638.54
6", BLRF FLANGE, ANSI - 300# (B 16.5)-A
18
-
87257.53
4", BLRF FLANGE, ANSI - 300# (B 16.5)-A
9
-
19014.15
2", BLRF FLANGE, ANSI - 300# (B 16.5)-A
27
-
26792.99
1", BLRF FLANGE,ANSI - 300# (B 16.5)-AS
30
-
16394.09
12", BLRF FLANGE, ANSI - 600# (B 16.5)
300
-
1820767.14
10", BLRF FLANGE, ANSI - 600# (B 16.5)
30
-
24701.77
SPECTACLE BLINDS:Supply and delivery of following mentioned Spectacle Blinds at respective stations as per Station wise Break up of material supply and as per technical specifications indicated in tender documents.
-
-
-
8" Spectacle Blind 300# F/F A/G - ASTM
12
-
339370.45
6" Spectacle Blind 300# F/F A/G - ASTM
12
-
306855.55
4" Spectacle Blind 300# F/F A/G - ASTM
6
-
70858.13
3" Spectacle Blind 300# F/F A/G - ASTM
12
-
103781.33
2" Spectacle Blind 300# F/F A/G - ASTM
15
-
105918.57
1" Spectacle Blind 300# F/F A/G - ASTM
30
-
112796.44
8" Spectacle Blind 600# F/F A/G - ASTM A
11
-
476948.93
6" Spectacle Blind 600# F/F A/G - ASTM A
2
-
53558.76
2" Spectacle Blind 600# F/F A/G - ASTM
7
-
73218.62
1" Spectacle Blind 600# F/F A/G - ASTM
12
-
59274.61
Supply and delivery of pipe fittings at respective stations as per Station wise Break up of material supply and as per technical sp ecifications from approved vendors specified in tender document.
-
-
-
12" x 8" ANSI 150# Un Equal Tee
3
-
30921.19
12" x 6" ANSI 150# Un Equal Tee
3
-
29582.05
12" x 4" ANSI 150# Un Equal Tee
36
-
343119.46
4"x2" 300# Unequal Tee-ASTM A420 Gr.WPL6
18
-
28919.32
2"x1" 300# Unequal Tee-ASTM A420 Gr.WPL6
60
-
37201.86
4"x2" 600# Unequal Tee
3
-
4772.66
4"x1" 600# Unequal Tee
3
-
5342.71
3"x2" 600# Un Equal Tee
3
-
3837.22
3"x1" 600# Un Equal Tee
36
-
45049.62
2"x1" 600# Un Equal Tee
30
-
18571.9
4"x3" 300# Unequal Tee-ASTM A420 Gr.WPL6
2
-
4819.95
3"x2" 300# Unequal Tee-ASTM A420 Gr.WPL6
22
-
26509.83
3"x1" 300# Unequal Tee-ASTM A420 Gr.WPL6
15
-
24471.31
12" ANSI 150# Equal Tee
10
-
96103.09
8" ANSI 150# Equal Tee
3
-
17617.45
6" ANSI 150# Equal Tee
3
-
6945.8
4" ANSI 150# Equal Tee
15
-
20301.55
8" 300# Equal Tee
13
-
82968.54
3" 300# Equal Tee
21
-
12770.87
2" 300# Equal Tee
30
-
11328.71
1" 300# Equal Tee
29
-
10658.5
4" 600# Equal Tee
1
-
7773.99
3" ANSI 600# Equal Tee
12
-
19779.96
2" ANSI 600# Equal Tee
12
-
9838.51
1" ANSI 600# Equal Tee
9
-
4502.35
12" ANSI 150# 90 deg LR Bends
26
-
12091.91
4" ANSI 150# 90 deg LR Bends
26
-
223504.41
8" 300# 90 deg LR Bend
36
-
33631.84
3" 300# 90 deg LR Bend
20
-
75204.47
2" 300# 90 deg LR Bend
17
-
34638
12" ANSI 600# 90 deg LR Bends
12
-
3912.41
4" ANSI 600# 90 deg LR Bends
4
-
1469.38
3" ANSI 600# 90 deg LR Bends
1
-
11548.59
12" ANSI 150# 45 deg LR Bends
4
-
16185.07
4" ANSI 150# 45 deg LR Bends
12
-
23485.78
8" 300# 45 deg LR Bend
3
-
4475.52
6" 300# 45 deg LR Bend
1
-
558.01
16" x 600#, LR Elbow 45 deg,
2
-
664.1
12" ANSI 600# 45 deg LR Bends
36
-
196140.78
8" ANSI 600# 45 deg LR Bends
45
-
24291.66
4" ANSI 600# 45 deg LR Bends
7
-
14470.86
8"X6" 300# Concentric Reducer
6
-
10757.49
6"X4" 300# Concentric Reducer
8
-
57558.8
4"X3" 300# Concentric Reducer
1
-
6383.43
3"X2" 300# Concentric Reducer
4
-
8504.02
3"X1" 300# Concentric Reducer
4
-
3841.51
2"X1" 300# Concentric Reducer
12
-
62052.8
12"x 8"x CR x 600#
1
-
5171.07
10"x 8"x CR x 600#
3
-
11633.93
10"x 6"x CR x 600#
3
-
5816.96
8"x 6"x CR x 600#
3
-
2353.32
8"x 4"x CR x 600#
3
-
1178.57
4" x 3" x CR x 600#
3
-
785.7
3" x 2"CRx 600#
2
-
31579.7
3" x 1"CRx 600#
5
-
36819.72
10"x 6"x CR x 600#
6
-
41227.19
1" 3000 lbsHALF COUPLING
6
-
31481.86
8"x 4"x CR x 600#
2
-
10493.95
8"X2" 300# Weld-o-let
6
-
2092.35
3" x 2"CRx 600#
6
-
6312.74
6"X2" 300# Weld-o-let
6
-
6360.53
1" size 3000 lbs St. NIPPLE
16
-
3236.22
12" x 4" WELDOLET 150#,
34
-
6832.03
Supply of ASTM A106 Gr.B pipes at respective stations as per Station wise Break up of material supply and as per technical specific ations from approved vendors specified in tender document.
-
-
-
8"x2"x600# Weld-o-let
1
-
3454.97
8"X2" 300# Weld-o-let
4
-
4281.8
6"X2" 300# Weld-o-let
6
-
5085.85
4.5" ODx 0.237" WT ASTM A 106 Gr B bare
18
-
25008.61
4.5" ODx 0.237" WT ASTM A 106 Gr B bare
294
-
441219.79
2.375" OD x 0.218"WT ASTM A 106 Gr B bar
150
-
108888.63
1.315" OD x 0.179"WT ASTM A 106 Gr B B
150
-
47246.61
Supply of ASTM A333 Gr.6 pipes at respective stations as per Station wise Break up of material supply and as per technical specific ations from approved vendors specified in tender document.
-
-
-
6.625" ODx 0.280" WT (Sch.STD) ASTM A 333 Gr 6 bare Pipe
30
-
88461.06
4.500" ODx 0.237" WT (Sch.STD) ASTM A 333 Gr 6 bare Pipe
22
-
41604.27
3.500" ODx 0.216" WT (Sch.STD) ASTM A 333 Gr 6
104
-
128765.19
2.375" ODx 0.218" WT (Sch.XS) ASTM A 333 Gr 6 bare pipe
329
-
243674.05
1.315" ODx 0.179"WT (Sch.XS) ASTM A 333 Gr 6 Bare pipe
222
-
93307.53
Supply of IS: 3589, Gr. Fe 410 pipes with internal coating at respective stations as per Station wise Break up of material supply a nd as per technical specifications from approved vendors specified in tender document. Cost shall be inclusive of all charges inclu ding charges for bare pipe, internal coating, inpsection of materials by approved TPI, Taxes etc. Note: 1) Internal coating shall be carried out at site. 2) The rate for the Fire Water pipe is inclusive of internal coating. No separate payment shall be made for internal coating at site.
-
-
-
12.75" OD x 0.25" WT IS:3589 FE410 Pipe
1160
-
5527118.58
Supply and delivery of API 600 Gate valve for fire water service at respective stations as per Station wise Break up of material su pply and as per technical specifications from approved vendors specified in tender document. Cost shall be inclusive of all charges including charges for inpsection of materials by approved TPI, Taxes etc.
-
-
-
12"x ANSI 150# HOV F/F API 600 Gate Valve FW
13
-
721378.07
4"x ANSI 150# HOV F/F API 600 Gate Valve FW
22
-
279638
Supply and delivery of Globe Valves at respective stations as per Station wise Break up of material supply and as per technical spe cifications from approved vendors specified in tender document.Cost shall be inclusive of all charges including charges for inpsecti on of materials by approved TPI, Taxes etc.
-
-
-
8",600#,F/F, A/G BS-1873 GLOBE Valve
5
-
1214017.98
2"x ANSI 600# F/F BS-1873 GLOBE Valve
4
-
105680.28
8",300#,F/F, A/G BS-1873 GLOBE Valve
3
-
579068.28
2",300#,F/F, A/G BS-1873 GLOBE Valve
5
-
112842.99
1",800#,W/W, A/G GLOBE Valve ISO 15761
13
-
41465.25
Supply and delivery of Thermal relief valve(TRVs) at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document.Cost shall be inclusive of all charges including charge s for inpsection of materials by approved TPI, Taxes etc.
-
-
-
1" x 1" 600# x300# F/F TRV
43
-
868971.72
1" x 1" 300# x300# F/F TRV
45
-
687050.81
Supply of Fire Fighting Monitor/hydrant
-
-
-
High Volume Long Range Foam Monitor 750 GPM capacity stand post type with inlet flange of 4" X 150#
18
-
6331581.34
Stand Post Type double way fire hydrent fitted with 2 Nos of single landing valve complete as per IS: 5290 alongwith 4" x150# WNRF F lange
60
-
938863.93
FIRE FIGHTING EQUIPMENT: Supply and delivery of Fire Fighting Equipment at respective stations as per Station wise Break up of mater ial supply and as per techhnical specifications indicated in tender documents.
-
-
-
9 kg DCP Extinguisher
21
-
96695.28
4.5 kg CO2 Extinguisher
18
-
133485.12
2 kg CO2 Extinguisher
36
-
211171.48
2.5 kg clean agent extinguishers IS 1568
12
-
165537.06
2 kg clean agent extinguishers IS 15683
6
-
74616.19
Fire Hose Box for keeping 2 Nos. of 15 M Type B delivery hose and one no. jet nozzle
33
-
150717.27
Type B Delivery Hoses of 15 M length bearing IS-636 mark
84
-
679288.19
Jet Nozzles
42
-
196886.52
Fog Nozzle
6
-
41296.72
Universal Nozzle
6
-
34948.79
Water curtain nozzle
6
-
14839.61
Sand drum with scoop
12
-
30482.94
Pair of Rubber hand gloves for Electrical work bearing IS mark
6
-
7622.4
First Aid Box with Snake serum
3
-
5743.15
Fire Bucket
12
-
4912.25
Safety Helmet
30
-
11100.38
Strecher WITH BLANKET
6
-
31788.99
Explosimeter
6
-
232227.68
Rescuscitor
6
-
46464.98
Electrical Siren
3
-
107241.96
Hand Operated siren
3
-
47740.23
Water gel blanket
6
-
97537.12
Positive Pressure type self containing Breathing Apparatus
3
-
23345.06
Safety Torch
6
-
26881.84
Fire Proximity suit
3
-
23345.06
Wind socks
12
-
41402.14
PA system/ Loudhailer/ megaphone
3
-
116730.69
Red & Green flag (Pairs) 2 nos in each c
6
-
9106.3
Extinguisher box for 9 kg DCP Extinguish
15
-
74457.35
Dry Chemical Powder silliconised pot
300
-
101516.58
CO2 cartridge - 200 gm capacity for 9 kg
18
-
11622.74
Low temparature rubber hand gloves
12
-
114352.48
Low temparature protective clothing
6
-
2719513.95
Emergency Kit: Supply and delivery of Emergency Kit consisting oflisted emergency equipments as per Annexure-VII of OISD 117
3
-
3058308.34
Corrosion Coupon: Supply of TOR Fitting Complete With Plug & Cap and Full bore Threaded Ball Valve: TOR fitting complete with Caps, Plugs, O-Rings, Nipple & 2" 600# full bore threaded ball valve.
-
-
-
TOR fitting complete with Caps, Plugs, O-Rings, Nipple & 2" 600# full bore threaded ball/gate valve. 2" Thread-O-Ring fitting consis ts of 2" nipple (spool piece), cap, o-ring and plug & 2" 600# full bore threaded ball valve as per Technical Specifications indicate d in tender documents.
12
-
296522.01
RETRACTABLE CORROSION COUPON HOLDER, FOR 8" PIPE
5
-
11347.65
Supply and delivery of API 6D Ball valves, BS 5351, BS1868 Swing Check Valve for use in process piping at respective stations as pe r Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document.
-
-
-
3" F/F ANSI 300# A/G,API 6D BALL VALVE
3
-
125936.28
2" F/F ANSI 600# A/G, API 6D BALL VALVE
23
-
624072.09
2" F/F ANSI 300# A/G,API 6D BALL VALVE
17
-
475759.01
Supply and delivery of BS 5351 Ball valve for use in air line at respective stations as per Station wise Break up of material suppl y and as per technical specifications from approved vendors specified in tender document
-
-
-
2" F/F ANSI 300# A/G, BALL VALVE- BS 535
15
-
202806.6
1" W/W ANSI 800# A/G, BALL VALVE- ISO 17
10
-
192369.15
1" F/F ANSI 600# A/G, BALL VALVE- BS 535
20
-
440407.15
1" F/F ANSI 600# A/G, BALL VALVE- BS 535
2
-
40071.97
T&I - Telecom Works - Non ITC (Supply)
-
-
-
Supply of 40 mm OD HDPE pipe as per tender specifications
22
-
1489355.57
Supply of 89 mm OD, Schedule 80, API 5L Grade-B/ ASTM A106 MS pipe for cable conduit as per tender specifications
348
-
583938.29
T&I - Telecom Works - Non ITC (Composit)
-
-
-
Supply and Installation of GI Pipe of 100 mm nominal bore heavy class as per IS1239, sub ducted by 40 mm OD HDPE pipe (excluding sup ply of HDPE pipe), by boring or jacking method across railway crossing, including all necessary pipe fittings, cost of arranging bor ing machine, other associated machinery, tools, tackles, skilled manpower, labour etc. job complete in every respects as per the dir ections of Engineer-in-charge/ Site Engineer. Measurement shall be done by the length of the GI pipe used in the crossings
66
-
395352.37
T&I - Telecom Work - ITC (Supply)
-
-
-
Supply of OFC Jointing kits as per tender specifications
33
-
282131.2
Supply of Electronic Marker Locator cum Cable/ Pipe Locator, Fault Locator as per tender specifications
1
-
282721.77
Supply of full range (upto 8 feet) RF iD Disk type Electronic Markers as per tender specifications
33
-
72232.92
Supply of pre-fabricated printed KM markers for OFC & HDPE as per tender specifications
135
-
354244.97
Supply of Joint pit markers for OFC joint locations as per tender specifications
63
-
217929.94
Supply of pre-fabricated RCC (1:1.5:3) Joint Box with lid as per tender specifications
39
-
481978.96
Supply of RCC Transition pits for building entry points as per tender specifications
13
-
164075.87
Supply of wall mounted Fibre Termination Box (FMS) as per tender specifications
6
-
88739.87
Supply of OFC Jointing kits as per tender specifications
30
-
256482.91
Supply of full range (upto 8 feet) RF iD Disk type Electronic Markers as per tender specifications
30
-
65666.29
Supply of 2 Pair unarmoured Telephone Cable as per specifications
3000
-
184327.8
Supply of 20 Pair Armoured PIJF Underground Telephone Cable as per specifications
300
-
54055.8
Supply of 5 Pair Armoured PIJF Underground Telephone Cable as per specifications
2000
-
229746
Cat 6 UTP (LAN) Networking Cable as per tender specifications
3000
-
78517.2
Wall mounted telephone socket outlet with 2 port telephone jack face plate (white/ cream colour) including RJ11 I/O. The item includ es modular plate & switch box/ gang box for fixing the face plate.
170
-
63247.17
Duplex (2 port) Face plate (Network I/O point) (white/ cream colour) for Local Area Network including RJ45 I/O, modular plate & swit ch box/ gang box for fixing the face plate.
150
-
77306.52
Wall mounted Cabinet (switching closet) for housing Networking Equipment/ CCTV hardware, patch panel & accessories including power distribution boxes, MCBs/ Isolator Switches, required installation materials as per tender specifications
6
-
285282.58
24 port Industrial Grade Network Switch with Optical Interfaces as per tender specifications
6
-
1067675.61
Power cable 3 core x 2.5 mm2 Armoured, Copper as per tender specifications
1500
-
179407.2
600 VA UPS with battery back-up for LAN switch
6
-
51249.22
T&I - Telecom Work - ITC (Services)
-
-
-
Laying of HDPE pipe (excluding blowing of OFC) in mainline pipe trench at the bottom in all types of soil (including roads, canals, rivers, nullahs, water course crossings, submerged crossings, saltpan areas etc.) including supply and installation of suitable str aps for strapping the HDPE duct with mainline pipe for anti buoyancy, installation of HDPE duct accessories such as plastic couplers , end caps, end plugs, cable sealing plugs, supply and installation of warning tape, consumable guide rods, HDPE jointing, inspectio n of HDPE joints, testing the installed HDPE duct by blowing mandrel with compressed air, pressure testing the HDPE pipe after layi ng as per procedure and performing all work as per drawings, specifications and instruction of the Engineer-in-charge/ Site Engineer and provisions of the contract document for making the duct ready in all respect for OFC blowing. The job includes transportation, loading and unloading of HDPE ducts in nominal length of 1000 meters and duct accessories such as couplers, end caps, end sealing p lugs etc. to various sites along the entire ROW / HDD crossing locations as per specifications and directions of Engineer-in-charge / Site Engineer
30
-
661541.04
Laying of HDPE Pipe in trenches/ walls/ concrete structure/ panels etc. as per specifications & drawings & blowing/ laying of Owner supplied Aurmoured/Unarmoured Optical Fibre Cable in HDPE pipe, carrying out end to end testing of laid Optical fibre cables by taki ng OTDR traces and submitting the OTDR trace printouts to Site Engineer/ Engineer-in-charge. The job includes the supply and install ation of required materials such as fixing clamps, screws, tags etc. as required to complete the job in all respects as per drawings and directions of Site Engineer/ Engineer-in-charge including cost of all labour, tools & tackles, test instruments, materials etc. The job includes handing over the tested cables to the Telecom Works Contractor and providing necessary assistance/ support to the Telecom Works Contractor in commissioning of Local Area Network.
3000
-
761808
Trenching for laying of HDPE in Independent trench Excavation in unpaved areas of earth in work sites for conventional cable trenches for a depth upto 1.5 metres including shoring, strutting etc. (if necessary), backfilling the trench, as directed by Engineer-in-charge/ Site Engineer, including all labour and materials complete as per drawings and tender specifications
4950
-
1316970.27
Transportation (loading and unloading) of Owner supplied unarmoured Optical fibre cable (OFC) to various sites along Right of Way (R OW), pre laying testing of each cable drum for each fibre and taking the OTDR traces, submission of OTDR traces (in hard as well as soft copy) to Engineer-in-charge/ Site Engineer, blowing of OFC through contractor laid HDPE, jointing / splicing of OFC, post insta llation testing of OFC for each fibre for each drum laid & taking OTDR traces, submission of OTDR traces (in hard as well as soft co py) to Engineer-in-charge/ Site Engineer as per the scope, specifications and directions of Engineer-in-charge/ Site Engineer
62
-
2251229.77
Installation of OFC jointing kits as per drawings, specifications and directions of Engineer-in-charge/ Site Engineer
63
-
754803.01
Installation of RF iD type Electronic Markers as per tender specifications. The job includes configuration & programming of the Elec tronic markers to write information data as per directions of Engineer-in-charge/ Site Engineer.
63
-
56464.2
Installation of pre-fabricated printed KM markers for OFC & HDPE as per tender specifications, drawings and directions of Engineer-i n-charge/ Site Engineer
135
-
200628.79
Installation of OFC Joint pit markers at every joint location as per specifications, drawings and directions of Engineer-in-charge/ Site Engineer
63
-
87588.87
Installation of pre-fabricated RCC (1:1.5:3) Joint Box with lid as per tender specifications, drawings and directions of Engineer-i n-charge/ Site Engineer.
63
-
214135.63
Installation of Transition Pits at building entry points as per tender specifications, drawings and directions of Engineer-in-charge / Site Engineer
13
-
118045.9
Installation of wall mounted Fibre Termination Box (FMS) as per tender specifications and directions of Engineer-in-charge/ Site Eng ineer
6
-
50592.9
Installation of Wall mounted Cabinet (switching closet) for housing Networking Equipment/ CCTV hardware, patch panel & accessories including power distribution boxes, MCBs/ Isolator Switches, required installation materials as per tender specifications
6
-
52373.66
T&I - Telecom Work - ITC (Composite)
-
-
-
Supply, erection and installation of GI Pipe of 100 mm nominal bore medium Class B as per IS1239 subject to owner's approval includi ng the supply & installation of all necessary pipe fittings such as bends, sockets, elbows, tees etc. bending, threading, clamping, plugs, packings, bushing etc. as required for sub ducting HDPE duct as per directions of Engineer-in-charge/ Site Engineer including cost of all labour, tools, materials complete in all respects.
110
-
161608.79
Supply and installation of IDF (intermediate distribution frame) / Distribution box of 20 Pair capacity with mounting arrangement a s per specifications
3
-
14534.67
Supply and installation of IDF (intermediate distribution frame) / Distribution box of 10 Pair capacity with mounting arrangements as per specification.
3
-
14602.54
Supply and installation of MDF (Main distribution frame) /Distribution box of 50 Pair capacity as per specifications
3
-
19470.07
Laying of HDPE conduit and blowing of OFC cable inside the SV/MOV premises along the boundary wall, line item includes supply & ins tallation of suitable clamps , connectors, fixture, corner bends, tools & tackles (comprising of anchor bolts/nuts/accessories etc) required for OFC entry inside SV/MOV loctaionalong the boundary wall by clamping of HDPE conduit at a height of 1 meter above the finished ground level and extending it along the length of boundary wall at 1 meter height upto the transition pit inside SV/RCP bui lding as per attached drawing no. STD-793-00. The line item includes all sevices required for blowing of OFC cable iin HDPE conduit inside the MOV/SV loctaion as per STD - 793 drawing.
2000
-
88311.2
T&I - Instrumentation Works (Supply)
-
-
-
Supply of Pressure Indicators (PI) of the range 0 to 100 Kg / Cm2 as per the technical specifications attached in the Tender.
4
-
21073.76
Supply of Pressure Indicators (PI) of the range 0 to 200 Kg / Cm2 as per the technical specifications attached in the Tender.
18
-
125320.67
Supply of cable glands - flame proof and weather proof including EP/WP certificates. Glands suitable for 40 C X 1.5sqmm cables. 5/4"
26
-
10795.06
Supply of cable glands - flame proof and weather proof including EP/WP certificates. Glands suitable for 12 C X 1.5sqmm cables. 1"
26
-
7008.54
Supply of cable glands - flame proof and weather proof including EP/WP certificates. Glands suitable for 4 C X 1.5sqmm cables. 1/2"
26
-
2937.61
Supply of Plugs - flame proof and weather proof including EP/WP certificates. Plugs 5/4"
26
-
2037.77
Supply of Plugs - flame proof and weather proof including EP/WP certificates. Plugs 1"
26
-
2037.77
Supply of Plugs - flame proof and weather proof including EP/WP certificates. Plugs 1/2"
26
-
1002.62
Supply of Reducers- flame proof and weather proof including EP/WP certificates. Reducers 1" to 1/2"
26
-
6760.95
Supply of Reducers- flame proof and weather proof including EP/WP certificates. Reducers 1" to 3/4"
26
-
7430.39
Fitting, Bushing, 25.4 MM X 12.7 MM NPT(F), Material: Carbon Steel, Manufacturing Process: Forged, Material Specification: A105, End Finish: Threaded, conform to ANSI 16.11 [ SAP code 4323020064]
92
-
8402.54
Supply and placing in position 5 mm thick steel checkered plates over cable ducts, valves, pits etc including keeping provision of h oles for lifting arrangement and providing lifting arrangement complete in all respect inclusive of cost of all labour, material, ca rriage etc as per specification & the direction of the engineer in-charge/site engineer
40
-
221792.8
Scrapper Detector Switch (12" 600#), Type: Vane, Body Material: Stainless steel, End connection: Flanged, Switch action: DPDT, Voltage:24 VDC, Current: 1A complete as per tender specifications.
1
-
76670.62
Jacking Bracket for 600# & 900#.[ SAP Code 8195999153]
1
-
56668.84
Scrapper Detector Switch (10" 600#), Type: Vane, Body Material: Stainless steel, End connection: Flanged, Switch action: DPDT, Voltage:24 VDC, Current: 1A complete as per tender specifications.
2
-
145247.5
T&I - Instrumentation Works (Services)
-
-
-
As built documentation for each station covering a) Control /signalling cable layout drawings, b) Cable trench details, c) Cable m arker details, d) Earth grid layout, e) Field instrument termination details, f) Cable schedule, g) Junction box wiring details, h) Earth resistivity measurement data, i) Field panel termination details, j) Calibration data of all instruments tested as per scope. , k) OTDR Traces of the laid OFC as applicable for respective stations
13
-
1840597.67
T&I - Instrumentation Works (Composite)
-
-
-
Installation, testing and commissioning of Pressure Indicator (PI) of various ratings as per drawings, recoomendations of OEM and d irections of Engineer in-charge/ Site engineer
7
-
33932.66
INSTALLATION OF PI+PS/PT: Installation, assistance in testing and commissioning of Pressure gauges and Pressure switches (PI+PS) / p ressure Gauge and pressure transmitter (PI+PT) of various ratings as per the directions of Engineer-in-charge/ Site engineer and dra wings
15
-
141722.48
INSTALLATION OF PT / PS: Installation, assistance in testing and commissioning of Pressure Transmitter (PT) / Pressure Switch (PS) o f various ratings as per the directions of Engineer in-charge/ Site engineer and drawings.
49
-
522883.03
INSTALLATION OF DPT: Installation, assistance in testing and commissioning of Differential Pressure Transmitter (DPT) as per the dir ections of Engineer in-charge/ Site engineer and drawings.
6
-
92344.3
INSTALLATION OF TEMPERATURE TRANSMITTER WITH THERMOWELL: Installation and assistance in testing & commissioning of temperature eleme nts/temperature transmitter(TT) by making necessary holes on the pipes, welding the socket for thermowell on the pipe including sup ply of boss, silicon paste etc as per the directions of engineer in-charge/site engineer and drawings.
5
-
46676.97
INSTALLATION OF SURFACE MOUNTED TEMPERATURE TRANSMITTER Installation and assistance in testing & commissioning of Surface Mounted te mperature elements/temperature transmitter (TT) by by welding the weld pad on the surface of the pipe, silicon paste as per the dir ections of engineer in-charge/site engineer and drawings.
15
-
195736.34
INSTALLATION OF EMERGENCY SHUTDOWN SWITCH: Installation and testing of emergency shut - down (ESD) Push button. This includes mounti ng of termination box as per the drawings, specification and instruction of Engineer in-charge/ Site engineer, replacement of broken glass covers and painting it in red colour.
18
-
218331.69
INSTALLATION & TESTING OF SCRAPPER DETECTOR: Installation, assistance in testing and commissioning of Scrapper Detector of various ratings aas per OEM recommandations, vendor drawings, directions of engineer in-charge/site engineer and other approved drawings.
3
-
19709.09
FLOW METER INSTALLATION - Taking delivery, shifting to installation site within the station premises, erecting and installing of the flow meter along with reducers and flow meter electronics/ flow transmitter. Providing assistance to control system vendor/meter su pplier in testing and commissioning of the turbine/ ultrasonic / coriolis mass flow meter / clamp on ultrasonic ete etc.. Making str uctural supports and fittings, clamps, screws, nuts, bolts, making the cable supports and terminating cables at panel and field ends . Mounting the junction boxes as per drawings,manufacturer's instructions, specification and direction/instruction of engineer in-ch arge/site engineer. Job shall include termination of cables at both fiels ends and control panel ends, supply of suitable size non-f lame proof cable glands at control panel and the cost of all labour, tools, materials, etc. including labelling, tagging using SS pl ates painting, glanding, ferruling complete in all respect.
8
-
186351.92
INSTRUMENTATION JOBS FOR PRESSURE CONTROL VALVE / FLOW CONTROL VALVE - Testing of control valve and field electronics, including fab rication of all structural supports and fittings, termination of related cables at field, panel & MCC end, after loop testing as per vendors drawing and direction of the site engineer. Mounting of junction box if any, supply of non flame proof cable glands for pa neland MCC end. The works includes tagging, labelling, glanding andferruling at both panel and field ends.
8
-
199360.15
INSTALLATION OF JUNCTION BOX/ PUSH BUTTON STATION - for MOV/ROSOV: Installation of non-flame proof junction box, explosion proof / flame proof junction boxes, Push button stations for MOV/ROSOV for marshalling of control cables, terminating the cables at field a nd control panel end, mounting the junction boxes/Push button station, connecting to earthing grid by supplying and installing all t he required materials such as supporting structure, canopy, cable gland hood, cement concrete, painting, GI wire etc. (excluding sup ply of the Junction Boxes/Push button station) in all respects complete as per specifications, drawings and direction of site Engine er including supply of suitable size non-flame proof cable glands at Control Panel end and the cost of labour,tools, materials, glan ding, ferruling etc. complete in all respects.
94
-
589040.66
INSTRUMENTATION JOBS FOR MOTOR OPERATED VALVES (MOV)/ROSOV/ROV - Carrying out the instrumentation and control system jobs on the alr eady erected actuator assembly of motor operated valves (MOV)by making the necessary cable connection at field and control panel end (excluding the supply of cables) calibrating the control components, adjusting the limit switches, testing the whole assembly as p er drawings specifications and direction of the engineer in-charge/site engineer complete in all respect, including supply of suitab le size non-flame-proof cable glands, ferruls, drilling/cutting of plate for fixing glands at Control Panel end and the cost of all labour, tools, glanding, ferruling, consumables etc.
110
-
743168.6
INSTALLATION OF CONTROL PANEL/CONSOLE DESK/ UPS/ RIO/ RTU/ PLC/ ACDB - Taking delivery, shifting the panels to installaion site and erection, installation, testing of Control panels, mounted with all the instruments, power supply units, UPS & battery banks logic control systems , barriers, providing assistance to control system vendor for commissioning of control system including panels, cont rol/console desk etc. installation on already made foundations or fixing on walls, or steel structure or fixtures aligning, levellin g, grouting, inter-wiring outgoing, incoming cable terminations as required, earthing, testing, complete in all respects as per draw ings, specifications and directions of the engineer in-charge/site engineer, including supply of suitable size non-flame proof cable glands for all incoming/outgoing cables and the cost of the materials, tools, labour, glanding, ferruling etc. complete in all resp ects.The indicated quantity is cumulative weight of panels.
8000
-
335120
STEEL STRUCTURAL WORKS - Supply, fabrication, erection and installation of steel/GI structural works of any type and shape such as c able racks, trays, push button, control posts, ladders, lugs, chain link, fencing, angles, joints, channels, plates, flats, bars etc as required as per specifications, drawings, directions of site engineer/engineer in-charge, inlcuding cost of all labour, material s, tools, consumables etc complete in all respects. Job is inclusuve of taking delivery from owner's go down and shifting to site wh erever required.
850
-
137882.41
Supply & installation of MAGNETIC PROXIMITY SWITCH with suitable junction box for termination of leads/cable for extending contact t o control system for unauthorised entry of building / MOV fencing.
20
-
314936.34
AIR CONDITIONER CASSETTE TYPE - Supply & Installation of 1.8T Cassette Type ACs flushed with false ceiling (Daiken / Hitachi / Car rier) along with 5KVA Voltage Stablizer & MS stand for outdoor unit, refregerant piping, drain piping complete as per instruction of EIC / Site Engineer
24
-
4292891.45
Installation of Manual Call Point (Explosion Proof & Weather Proof) in Hazardous area, terminating the cables at field and control p anel end, connecting to earthing grid by supplying and installing all the required materialssuch as supporting structure, cement con crete, painting, GI wire etc.(excluding supply of the Manual Call Point) complete in all respectsas per specifications.
12
-
45646.32
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%