Indian Oil Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Indian Oil Corporation Limited - IOCL Tender
Security and Emergency Services
Eprocure
Opening Date16 Dec 2024
Closing Soon15 Jan 2025
Tender Amount₹ 10,37,27,348.87
Costs
EMD
₹ 2,61,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Revamping Of Fire-fighting System And Associated Facilities Including Extension Of Fire Control Room At Indian Oil Bhawan Noida
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PLHO_182642_1Tender No
PLCC/Fire Fighting/HR/24131Tender Authority
Indian Oil Corporation Limited ViewPurchaser Address
-Website
http://https://www.iocl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Bidders_help_Document_for_Preferencial_ Bidding_20230207_v1
Special_Instructions_to_the_Bidders_20230207_version_1a
BOQ Items
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe for wet riser & sprinkler System conforming to IS: 3589 / IS: 1239 with all accessories like all fittings (upto 50mm dia threaded M.S.forged fittings and above 50 mm dia MS forged fittings with welded joints shall be used) including elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on floor / wall /ceiling with suitable size clamps, hangers, structural steel supports as per specification. And PVC pipe sleeve to be provided wherever the pipes are crossing the walls/floors and sealing the sleeves as per consultants requirements including cutting holes and chases in brick, R.C.C work and making good the same to original conditions complete in all respects. Radiographic inspection cost is included in the item
-
-
-
... More
a)25 mm dia(4.04mm thickness) screwed joint
2625
-
2116986.38
... More
b)32 mm dia(4.05mm thickness)screwed joint
250
-
230613.3
... More
c) 40 mm dia(4.05mm thickness)screwed joint
1100
-
1232892.32
... More
d) 50 mm dia(4.5mm thickness)screwed joint
610
-
847017.45
... More
e)65 mm dia(4.5mm thickness)
650
-
1137184.88
... More
f)80 mm dia(4.85mm thickness)
635
-
1297472.89
... More
g)100 mm dia(5.4mm thickness)
200
-
553903.8
... More
h)150 mm dia(5.4mm thickness)
700
-
2711848.86
... More
Providing two coats of synthetic enamel paint of approved shade over a coat of primer including painting of legends, arrows showing direction of flow as per the approval of the architects / consultants complete in all respects.Paints shall have VOC concentration zero or less than limit as per OSHA requirement. Paints manufacturer shall be as per technical specifications.
-
-
-
... More
a)25 mm dia
2625
-
133192.5
... More
b)32 mm dia
250
-
13275
... More
c) 40 mm dia
1100
-
58410
... More
d) 50 mm dia
610
-
37429.66
... More
e) 65 mm dia
650
-
42185
... More
f) 80 mm dia
635
-
51701.7
... More
g)100 mm dia
200
-
16520
... More
h)150 mm dia
700
-
90860
... More
Providing, laying, jointing, testing & commissioning in trenches the following sizes of M.S. class `C' (heavy class) pipes conforming to IS: 3589 / IS: 1239 with accessories like fittings including tees, elbows, reducers, flanges, rubber gaskets, G.I. nuts, bolts and washers and providing 150mm thick fine sand layer all around the pipe, including excavation in all kind of soil/ hard rock, refilling, ramming and removing the excavated surplus material and making good the same complete as required including 'Providing protection to embedded M.S pipes and fittings by wrapping 4mm thick pypkote protection including proper overlaps on joints as per technical specification. Radiographic inspection cost is included in the item
-
-
-
... More
a) 80 mm dia
110
-
346566
... More
b) 150 mm dia
150
-
1398300
... More
Providing, fixing, testing & commissioning Orifice plate made out of 8 mm thick stainless plate for pipe to reduce pressure upto 3.5 Kg/sqcm complete in all respects.
-
-
-
... More
a) 65 mm dia
1
-
21240
... More
b) 80 mm dia
8
-
202960
... More
c) 100 mm dia
20
-
590000
... More
d) 150 mm dia
28
-
892080
... More
Providing, fixing, testing & commissioning gun metal ball valve suitable for pressure 15 Kg/Cm2 and confirming to IS: 778 of the following size including providing necessary union / flange complete in all respects.
-
-
-
... More
a) 25 mm dia
48
-
61171.2
... More
b) 50 mm dia
48
-
152928
... More
Supplying, fixing, testing & commissioning of butterfly valve of PN 1.6 rating with bronze / gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets, etc. confirming to IS 13095 of following sizes as required complete in all respects. This item includes cost of mating flanges.
-
-
-
... More
a) 65 mm dia
8
-
37305.56
... More
b) 80 mm dia
36
-
194410.14
... More
c) 100 mm dia
15
-
108401.35
... More
d) 150 mm dia
50
-
485613.66
... More
e) 200 mm dia
1
-
16483.76
... More
f) 250 mm dia(lever operated)
2
-
44281.88
... More
Providing, installation, testing & commissioning of C.I. horizontal flap type non-return valve of following sizes confirming to IS:5312 suitable for pressure of 15 Kg/Sqcm with flanges, nuts, bolts, washer & painting etc. complete as required.
-
-
-
... More
a) 65 mm dia
6
-
41741.06
... More
b) 200 mm dia
1
-
31740.49
... More
Providing, fixing, testing & commissioning of C.I. wafer type check valve suitable for pressure 15 Kg/Sqcm. with flanges, Nut, bolts & washers, painting etc. complete as required.
-
-
-
... More
a) 80 mm dia
2
-
8496
... More
b) 150 mm dia
3
-
29736
... More
Providing, fixing, testing & commissioning single acting air release valve with brass gate valve, flanges/ union, Suitable for sprinkler/ wet riser system with all necessary connections complete in all respects.
-
-
-
... More
a. 25 mm dia
8
-
169920
... More
Providing & fixing double flanged flexicon rubber expansion joint with unit control of standard length as per maufacturers specs. Tested to a pressure of 15Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required. (Each quantity is considered as Pair for instalattion on both side of Pumps)
-
-
-
... More
a) 80 mm dia
2
-
14632
... More
b) 150 mm dia
3
-
38763
... More
Providing, installation, testing & commissioning of Stainless Steel `Y' strainer fabricated out of 1.6mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange tested to a pressure of 15 Kg/sqcm including rubber gasket, flanges, nuts, bolts and washers complete as required.
-
-
-
... More
a) 80 mm dia
2
-
10210.89
... More
b) 150 mm dia
4
-
48318.55
... More
Providing, fixing, testing & commissioning gun metal fire hydrant valve with 80 mm N.B. flanged inlet, brass spindal, one no. 63 mm dia. double headed female instantaneous outlet type. G.M. coupling ,blank cap, chain. Conforming to IS:5290. Including tapping from wet riser complete as required.
55
-
532180
... More
Providing, fixing, testing & commissioning swinging type First Aid hose reel in red colour with 36 mts long and 20 mm dia heavy duty rubber water hose, 20 mm dia globe valve stop cock, terminating with G.M. coupling & nozzle of 5mm outlet with shut off valve confirming to IS 8090 - 1976 complete with drum and brackets for fixing on wall, bolts & nuts conforming to IS:884-1969 complete as required.
52
-
724048
... More
Providing and Fixing Hose pipe, 63 mm dia and 15 mts long, duly reinforced, rubber lined suitable for bursting pressure not less than 22 Kg/Sqcm conforming to IS: 636-2018 type A with gun metal heavy duty instantaneous type coupling (Pair male & female parts) conforming to IS: 903:1993 duly bound with GI wire, rivets etc. complete as required
104
-
586431.02
... More
Providing and fixing 63 mm dia instantaneous pattern branch short gunmetal pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling complete as required. Detailed specification shall be as per CO-HSE Specification for Jet nozzle with Branch Pipe attached with this tender.
52
-
136179.93
... More
Providing and fixing 63 mm dia instantaneous pattern Universal branch (Triple Purpose Nozzle) gunmetal pipe with 20 mm nominal internal diameter size nozzle suitable for inter connection to hose pipe coupling complete as required. Detailed specification shall be as per CO-HSE Specification for Universal Nozzle with Branch Pipe attached with this tender.
52
-
294528
... More
Providing and fixing standard firemans axe with heavy rubber handle.
52
-
36816
... More
Providing and fixing inlet breaching having C.I. body four way gun metal 63 mm dia instantaneous inlets conforming to IS 903 fitted with non return valves, 25 mm dia gun metal drain cock, blank cap, brass chains and 150 mm dia flanges with all accessories suitable for local fire tender complete as required.
2
-
73160
... More
Providing and fixing inlet breaching having C.I. body two way gun metal 63 mm dia instantaneous inlets conforming to IS 903 fitted with non return valves, 25 mm dia gun metal drain cock, blank cap, brass chains and 100 mm dia flanges with all accessories suitable for local fire tender complete as required.
4
-
80240
... More
Providing and fixing weather proof cabinet of size 0.8 x 0.6 x 0.25 mtr made out of M.S. sheet of 16 Gauge thickness having central opening and fitted with minimum 2 mm thick UV resistance acrylics transparent sheet in front door fitted in double door. (should be able to withstand exposure upto 480C) suitable to accomodate, external yard hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man's axe. Finish paint colour shall be “Golden Yellow” having luminance and other values as stipulated in Table 1 of IS 5:2007. (latest amendments). Other details as per CO-HSE sepcification for Fire Hose Box attached with the tender. It shall be mounted at the specific external hydrant point complete as required with pedestal,pipe etc. as per direction of Engineer-In-Charge
6
-
50976
... More
Providing and fixing 4 mm thick glass door of size 2.1 m x 1.2 m with anodized aluminium frame of size 0.10 x 0.05 M with centre opening for fire hose cabinet complete in all respects. Suitably marked on the outside with the letters "FIRE HOSE" including locking arrangement. All aluminium work to be painted with Fire Red color paint (Shade No. 536 of IS:5).
52
-
860880.8
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe of followng sizes for suction & delivery headers of required length conforming to IS: 3589 / IS: 1239 suitable for 15 Kg/Sqcm working pressure with end flange connections having inlet & outlet flanged connections as per drawing, 150 mm dia pressure gauge with stop cock including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall / ceiling with suitable clamp / support frame complete in all respects and painting with two coats of synthetic enamel paint of approved shade over a coat of primer including painting of legends, arrows showing direction of flow as per the approval of the architects / consultants.Paints shall have VOC concentration zero or less than limit as per OSHA requirement. Paints manufacturer shall be as per technical specifications.
-
-
-
... More
a) 150 mm dia
10
-
38740.7
... More
b) 200 mm dia (Wall thickness 6.3mm)
15
-
88824.97
... More
c) 250 mm dia (Wall thickness 6.3mm)
15
-
108271.25
... More
Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all accessories as per manufacturer's specifications.
-
-
-
... More
a) CO2 gas nozzle type - 4.5kg capacity (IS:15683). Detailed specification shall be as per CO-HSE Specification for 4.5 Kg CO2 extinguisher attached with this tender.
100
-
896800
... More
b) ABC dry powder stored pressure type 4 kg capacity (IS:15683).
50
-
377600
... More
Obtaining Fire NOC of IndianOil PLHO building from local fire authority at initial & various other stages of works, including preparation & submission of necessary reports, drawings, documents as per requirement of local fire authority. This work shall include all necessary associated costs which are not explicity mentioned above but are mandatory to have fire authority approval for NOC, complete in all respect. All necessary liasioning for obtaining Fire NOC will be under scope of Contractor & no extra payment shall be made for the same. Only Goverment fees (if any) necessary for obtaining Fire NOC as per laid down Govt. policy shall be reimbursed by IOCL based on actual bill from Fire Deptt. / Govt.
1
-
389400
... More
Providing, fixing, testing & commissioning of cast iron foot valve complete with flange - 150mm dia.
2
-
18644
... More
Providing, fixing, testing & commissioning of 15 mm dia C.P.brass quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories complete in all respect.
-
-
-
... More
a) Pendant type with heavy duty adjustable SS rosette plate
177
-
100150.46
... More
b) Concealed type
1400
-
2177666.4
... More
c) Upright type
1378
-
779702.44
... More
Providing, fixing, testing & commissioning of Installation Control Valve with turbine type automatic Alarm Gong to be connected with control valve, drain & test valve as per manufacturer's specifications complete in all respect.
-
-
-
... More
a) 150 mm dia
4
-
174640
... More
Providing, fixing, testing & commissioning of Inspectors Test Assembly complete with test valve, sight glass sectional drain valve, union with corrosion resistant orifice all complete strictly as per drawing.
-
-
-
... More
a) 50 mm dia
48
-
339840
... More
Providing, fixing, testing & commissioning of MS air cushion tank on top of each riser fabricated from 10mm thick MS plate, 250 mm in diameter and 1.2 m in height with dished ends fabricated from 12mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure guage with gun metal stop cock complete with all accessories as required.
8
-
169920
... More
Providing and fixing electrically operated flow indicating switches with threaded connection for indicating water flow in sprinkler branch line on each floor with necessary local junction box installed in an accessible place close to flow switch with 2 core 1.5 sqmm FRLS copper cable (2XWY) from flow switch to junction box including all materials for fixing the junction box/cables complete in all respects.
50
-
488919.43
... More
Providing and fixing 2 core x 1.5 sq.mm copper conductor PVC sheathed insulated FRLS cable (2XWY) in 20 mm dia conduit including cost of conduit and clamping the same with M.S. clamps painted with 3 coats of enamel paint over a coat of primer complete in all respects. (for connection from each floor to annunciation panel installed in the fire control panel).
800
-
396480
... More
Providing and fixing 28 zone Annunciation panel (as per IS 2189) for the Sprinkler System on A.C. supply with standby battery complete in all respects as per approved makes. Panel shall have following parameters. a) Operates on 230 V AC, 50 Hz AC supply b) Sprinkler annunciation panel shall be microprocessor based indication panel. The panel shall give the indication of activation of flow switch device. Panel shall have LED indication giving a bright light for long distance visibility. c) Zone wise annunciation window for zone status including control and power cabling
2
-
1227200
... More
Supply, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 psi (Burst) with branch line (Inlet) 25 mm NPT male thread to sprinkler head (outlet) 15 mm NPT female thread with reducer, nipple, 2 side brackets, centre bracket, stockbar of following sizes complete as required. The flexible connectors shall be supported through false ceiling through clamps or as directed at site complete in all respects.
-
-
-
... More
Size - 1500 mm
2250
-
4470515.55
... More
Providing and fixing signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+ -10%) containing lumigen II as base chemical, covered under UV stablized coating and of appropriate size (Glo-lite or Equivalent Make) including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats anchor fasteners etc. complete in all respects as diercted by Engineer-in-charge. Unit - Square inch
8700
-
251517
... More
Providing, jointing and testing of automaticaly operated Halotron fire extinguishers (Cap-5kg,temperature rating-5kg,temperature rating-68degc ,test pressure-30bar) complete with all accessories / fittings.-Minimax or Equivalent make. (Modular Type-Ceiling/Wall Mounted)
42
-
1635480
... More
Providing & installing MS 24 gauge fire buckets (capacity of each bucket = 9 lts) filled with sand including MS stand for hanging the buckets.All MS items shall be painted with two coats of primer & two coats of paint of approved colour.
-
-
-
... More
Set of four buckets with stand
4
-
34928
... More
Providing, jointing and testing of automaticaly operated gas based fire extinguishers for electrical panel complete with complete tubing & all associated accessories/fittings.
10
-
920400
... More
SUB-HEAD B :FIRE PUMPS & EQUIPMENTS
-
-
-
... More
Supply, installation, testing and commissioning of electrically driven Main Fire Pumps, suitable for automatic operation consisting of the following: a) Fire Pump 2850 LPM at 100 M; Single/ Multi stage Pump, CI Casing Bronze Impeller, SS shaft, SS Sleeve with Mech Seal, Balance Seal, Gland Plate SS, SS Sleeve, Pump with SS Pressure Gauge at Pump Suction and Discharge flange, coupled with High Efficiency IE2 Motor / 4 Pole, MS Heavy Base Frame with Bottom and Top Mounting Plates, Pin Bush Coupling with safety margin of over 2, Coupling Guard, High Tensile Fasteners. Pump set provided with AVM Pads heavy duty design for vibration elimination level. The pump should meet the condition of Local fire Authority. Location-Pump room at Basement level. Motor Capacity shall be as per Pump requirement & to be proposed by vendor for approval. b) Suitable Reinforced cement concrete foundation with cement concrete plaster complete with antivibration arrangement of cushy foot mountings. c) O&M spares are to be quoted inclusive of this item.
2
-
1899800
... More
Supply, installation, testing and commissioning of Diesel Engine driven fire pump suitable for automatic operation comprising of the following: a) Fire Pump 2850 LPM at 100 m single/ multi stage Pump with CI Casing Bronze Impeller, SS shaft, SS Sleeve with Mech Seal, Balance Seal, Gland Plate SS, SS Sleeve, Pump with SS Pressure Gauge at Pump Suction and Discharge flange, coupled with Diesel Engine 1500 RPM, MS Heavy Base Frame with Bottom and Top Mounting Plates, Pin Bush Coupling with safety margin of over 2, Coupling Guard, High Tensile Fasteners. Pump set provided with AVM Pads heavy duty design for vibration elimination. The pump should meet the condition of Local fire Authority. Location-Pump room at basement level. b) Air Cooled Diesel engine of speed 1500 RPM for the above pump with automatic starting mechanism and other accessories including fuel tank (fabricated from 3mm MS sheet painting with two coats of synthetic enamel paint over a coat of primer) capacity atleast 500L or 110% of the 8 Hours fuel consumption of the FF Engine whichever is higher & upon approval of EIC as per technical specification for selected Engine (fitted with Magnetic oil level indicator, MH with cover drain valve, Air vent hydraulic pumps including structural supports (painted with approved shade), 2 Nos. x 12 volt battery, heat exchanger with necessary piping connections & fittings flexible coupling, coupling guard & exhaust pipe as per drawing complete as required. c) Common base plate for (a) and (b) from M.S. channel of required size. d) Suitable Reinforced cement concrete foundation with plaster, Antivibration arrangement of cushy foot mountings. e) 24 volts, 180 AH Lead battery - Exide make (12 volts - 2 Nos.) with boost / trickle charger for starting the engine automatically as required. f) O&M spares are to be quoted inclusive of this item
1
-
1639610
... More
Supply, installation, testing and commissioning of Jockey pump comprising of the following: a) Fire Pump 180 lpm at 100 m (Jockey Pump) Single/ Multi stage Pump with CI Casing Bronze Impeller, SS shaft, SS Sleeve with Mech Seal, Balance Seal, Gland Plate SS, SS Sleeve, Pump SS Pressure Gauge at Pump Suction and Discharge flange, coupled with High Efficiency IE2 Motor / 2 Pole, MS Heavy Base Frame with Bottom and Top Mounting Plates, Pin Bush Coupling with safety margin of over 2, Coupling Guard, High Tensile Fasteners. Pump set provided with AVM Pads heavy duty design for vibration elimination. The pump should meet the condition of Local fire Authority. Location-Pump room at basement level. Motor Capacity shall be as per Pump requirement & to be proposed by vendor for approval. b) Suitable Reinforced Cement Concrete foundation with plaster, Antivibration arrangement of cushy foot mounting. c) O&M spares are to be quoted inclusive of this item
2
-
601800
... More
Providing, fixing, testing and commissioning of pressure vessel (minimum 450 mm dia & 2000 mm height-shell -10 mm, dished ends-12mm) for pressurization of hydrant system complete with pressure switches, pressure gauge, valves at outlet/ drain to operate as per operating sequences including 80 mm dia drain valve, air release valve with stop cock on the top Duly painted from inside and outside complete as required.
2
-
101480
... More
Control Panel for fire fighting equipments in Plant Room:- PANEL-1 Design, manufacture, supply, installation, testing and commissioning of the following intergrated, cubicle type, dead front, extensible, sheet steel control panel anchoring the panel to the foundation. The panel shall be duly powder coated and suitable for 500 volts, 50 cycles, 4 wire supply. Quoted price shall include 25 mm thick rubber mats over 50 mm thick wood platform, wiring, cabling cable tray, control wiring, power cablling and copper earthing from control panel to various equipment like motor starters, pump motor, etc. The panel shall have separate compartments for bus bar and cable alleys. The following components and accessories shall be mounted within each control panel. a) One No. Incoming MCCB complete with MFM including the following: i) Over voltage and under voltage tripping mechanism for persistent voltage fluctuations of ± 10% of the rated voltage for more than 5 minutes. ii) CT operated over current and earth fault realy (IDMT) with indicating lamps. iii) Phase indicating lamps with toggle switches. iv) Indication lamps for ON/OFF/TRIP starters of motor. b) Copper bus bar sleeves type, rated at 400 amps for three phase & neurtal phase bus bar shall have maximum current density of 1 amps per sq.cm. and the neutral bus bar of not less than 50% capacity. UOUTGOING: c) Outgoing feeders with Soft starters (Model-PSTX-ABB/ equivalent) with Single Phase Preventor and out going feeder to wet riser pump motor(3 Nos.-120 hp each appx, 2 Working & 1 Spare). The compartment shall contain CT operated ammeter of suitable range with selector switch and an indicating lamp with fuse and toggle switch for`ON'/`TRIP'status of motor. d) Direct on-line (DOL) starter with single phase preventer, thermal overload relay, power contactor etc. and outgoing feeder to jockey pump motor(3 Nos.-15 hp each appx., 2 Working & 1 Spare). The compartment shall contain CT operated ammeter of suitable rang and an indicating lamp with fuse and toggle switch for `ON'/`TRIP' status of pump motors. e) Necessary cable alleys space for spare switches, internal wiring and copper earthing of all equipment shall also be included. All switch gears/control gears shall be motor duty rating. f) 1 No. 40 amps, 1No. 60 amps MCCB's as spare. All MCCB's to be suitable for motor duty. g) Providing & fixing AMF autostart panel with pressure switch for diesel engine complete with battery charger and all accessories, wiring & cabling including connection to diesel engine complete as required ready for working h) Control Panel as described above. Syncronisation with Fire Alarm System including S/I/T/C of following: i. Design of Panel on based on new Fire Alarm Sytem to be given by the contractor ii. All control / power wiring from fire fighting panel and main fire alarm panel including termination All Motor starter components such as MCCB/Contactor/Thermal overload/ single phase preventor relays/CT etc. rating shall be as per type-2 coordination chart in line with IEC 60947
1
-
1486800
... More
Providing and laying 52 mm thick cement concrete flooring with metallic hardner topping, under layer of 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer of 12 mm thick metallic concrete hardner consisting of mix 1:2 (1 cement : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compound such as IRONITE NO. 1 of IRONITE CO. OF INDIA LTD. or aproved equivalent mixed in the ratio 4:1 (4 parts of cement : 1 part of metallic floor hardening compound of approval quality) by weight, inclusive of cost of finishing, labour, material, equipment, etc. as per specifications and directions of the Engineer-in-Charge
150
-
191292.75
... More
SUB-HEAD C ---MISCELLANEOUS
-
-
-
... More
Dismantling of existing installation in Basement Pump Room including old pumps alongwith motors, engine & associated piping, Spinkler line in basement area, Wet Riser Line, Down Comer Line, yard area hydrants, inlet points, associated accessories etc. This shall also include dismantling of exsiting foundation of pumps & disposal of all unserviceable material and mulba to contractor's own borrowed area/ local authorities declared mulba off-loading site outside IndianOil Building complex. Brief description of items included in this are FF / Hydrant Pumps (1 No. motor operated & 1 No. engine operated), Sprinkler Pump (1 No. motor operated) & Jockey Pump (1 No. motor operated), 4 Nos. Wet Risers, Down Comer; 8 Nos. yard hydrants & 4 Nos. inlet points in the yard area and the Sprinkler system at basement including their associated accessories and pipelines.
1
-
755200
... More
Salvage value of old pumps alongwith motors, engine & associated piping, Spinkler line in basement area, Wet Riser Line, Down Comer Line, yard area hydrants, inlet points, associated accessories etc. This shall also include removal of these materials from IndianOil Building Complex. Brief description of items included in this are FF / Hydrant Pumps (1 No. motor operated & 1 No. engine operated), Sprinkler Pump (1 No. motor operated) & Jockey Pump (1 No. motor operated), 4 Nos. Wet Risers, Down Comer; 8 Nos. yard hydrants & 4 Nos. inlet points in the yard area and the Sprinkler system at basement including their associated accessories and pipelines
1
-
-434240
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum moisture resistant board.
12323.11
-
18985372.68
... More
Dismantling aluminium/ gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by the Engineer-in-Charge. The job also include removal of Existing Electrical fixture/ cables/ earthing in each floor and stacking of material with in 50 meters lead as directed by the Engineer-in-Charge.
12323.11
-
669916.46
... More
Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to designated location/ approved municiple dumping ground for lead up to 10 Km and for all lifts, complete as per directions of the Engineer-in-Charge. [Note: This item shall also be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicles of 3.5 cum or more.]
500
-
184162.6
... More
Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, claddings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cutting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. and supplying & applying painting with two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of "EPILUX 610" Primer of M/s BERGER or any other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of concrete work).
20
-
3016311.75
... More
Providing and applying two or more Coats of Plastic Emulsion paint of suitable shade of approved brand over Gypsum false Ceiling (New work) including providing and applying white cement based putty of average thickness of 1 mm over the ceiling surface to prepare the surface even and smooth prior to painting, complete in all respect.
132646
-
6417413.48
... More
Providing and applying synthetic enamel paint of approved quality and shade in two or more coats including primer wherever required, on any existing or new surface including preparation of base by rubbing sand paper, etc complete all labour,materials tools and tackles as directed
1500
-
235958.7
... More
S/I/T/C of Overhead Tanks (3 Nos. of 10000 ltr & 1 Nos. of 5000 ltr) including the dismantling of old installation and its removal from the site.
1
-
1032500
... More
Construction brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500 x 450mm precast RCC horizontal grating with frame complete as per standard design.
1
-
6903
... More
SUB-HEAD D - FIRE CONTROL ROOM EXTENSION
-
-
-
... More
CONCRETE CHIPPING
-
-
-
... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
-
-
-
... More
50mm average thickness
5
-
1291.39
... More
Steel Work
-
-
-
... More
Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, claddings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cutting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. including preparation of detailed fabrication drawings & structrual design as per site requirement along with design calculations vetted by a structural engineer for submission to Engineer-in-Charge for approval before start of fabrication, supplying & applying painting with two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of "EPILUX 610" Primer of M/s BERGER or any other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of concrete work).
6.5
-
1127346.49
... More
PCC
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources]
15
-
121505.9
... More
Stone Flooring
-
-
-
... More
Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete : Red sand stone slab
-
-
-
... More
40 to 50 mm thick
90
-
103210.47
... More
RCC Flooring
-
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
-
-
-
... More
1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources]
90
-
898991.5
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level :
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500 D or more
10000.69
-
1080718.02
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
200
-
73728.76
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
400
-
379813.68
... More
Tile Flooring
-
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joints with white cement and matching pigments etc., complete : Size of Tile 600x600 mm
100
-
194198.5
... More
Brickwork
-
-
-
... More
Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
... More
Cement mortar 1:4 (1 cement : 4 coarse sand)
25
-
252664.25
... More
Plastering
-
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :
-
-
-
... More
1:4 (1 cement: 4 fine sand)
220
-
87664.32
... More
Painting
-
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
220
-
32784.88
... More
Relocating FAP and other Panels & equipments
-
-
-
... More
Dismantling & shifting of the Fire Alarm Panel & other Panels & equipments as shown in the proposed extension drawing
1
-
60180
... More
SUB-HEAD E --- FIRE ALARM SYSTEM REPLACEMENT
-
-
-
... More
Fire Panel & Annunciators
-
-
-
... More
Supply, Installation, Testing & Commissioning of - Microprocessor based Multi-loop, True Peer-to-Peer Networkable Addressable Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 event plus 1000 alarm log history events, QWERTY keypad for programming. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop. Each loop shall have a capacity of minimum 300 analog addressable devices. The panel shall work in degrade mode in case of CPU failure. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition.The panel shall have c Integrated 8 channel Digital Voice Evacuation System Controller capable of broadcasting Evacuation Messages on same peer-to-peer Network and 2 ways Communication Fire Fighters System capable of supervising all the speaker circuits with adequate zone control and accessories. Failure of Fire Panel CPU shall not result in failure of DVC operation. The Fire Fighters Telephone System shall be capable of having minimum 30 Telephones in conference in multiple FFT Risers. Designed to meet UL864, 10th Edition .Panel should seamlessly integrate with the existing panel (BIDDER SHOULD HAVE MANUFACATURER AUTHORIZATION FORM (MAF) FOR THIS PARTICULAR PROJECT ON OEM LETTERHEAD), (DISTRIBUTOR CERTIFICATE OR SUBDEALER AUTHORIZATION IS NOT ACCEPTABLE) Approved Make & Model: Notifier / JCI(IFC series) / Schrack / Gamewell; NFS2-3030
-
-
-
... More
2-loop
1
-
853314.64
... More
Supply, Installation, Testing & Commissioning of - Network card for networking Approved Make & Model: Notifier / JCI(IFC series) / Schrack / Gamewell; NCM-W
4
-
269855
... More
S/I/T/C of Network Repeater Panel with minimum 10" Color Touch Screen display/ QWERTY Keypad, mapping minimum 2,00,000 points on network. The NRP shall act as an independent node Communicating on the peer to peer network and shall not be dependant on the Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of NRP operation. UL & FM Approved only. Approved Make & Model: Notifier / JCI(IFC series) / Schrack / Gamewell; NCA-2+ABS-TD+CHS-2d+NCM-MF
1
-
456896
... More
Supply, Installation, Testing & Commissioning of - Digital Audio Amplifier shall be dual channel capable of processing Two of 8 audio channels and total of 50 W at 70.7 VRMS output along with necessary enclosures. The Digital Audio Amplifier shall be fully monitored for fault and alarm reporting. The proposed Digital Audio Amplifiers shall (be Wall/Panel Mounted) not be rail mounted / dependant on Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of Amplifier operation. Approved Make & Model: Notifier / JCI(IFC series) / Schrack / Gamewell; DAA2-5070E
5
-
1146452.6
... More
Supply, Installation, Testing & Commissioning of - Addressable Multi-criteria Photo-Thermal Detector with sensitivity range of 0.5 to 4.0% obs/ft.The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing Approved Make & Model: Notifier / JCI(IFC series) / Schrack / Gamewell; FSP/951T + B501/WHITE
1350
-
5743832.31
... More
Supply, Installation, Testing & Commissioning of Addressable Rate of Rise Heat Detector rated at 8.3 deg C/min. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. Approved Make & Model: Notifier / JCI(IFC series) / Schrack / Gamewell; FST/951R + B501/WHITE
60
-
227032.24
... More
Supply, Installation, Testing & Commissioning of Addressable Duct Smoke Detector. The duct detector shall have an air velocity rating from 100 to 4000 ft/min. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. Approved Make & Model: Notifier / JCI(IFC series) / Schrack / Gamewell; DNR + FSP/951 + DST1.5
25
-
426520.74
... More
Supply, Installation, Testing & Commissioning of Addressable Manual Call Point (Pull down / Break Glass Type). The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Approved Make & Model: Notifier / JCI(IFC series) / Schrack / Gamewell; F/MCP/GLASS
75
-
348041.3
... More
Supply, Installation, Testing & Commissioning of Addressable Control Module for Sounders / Strobes / Sounder cum Strobes. The control module shall provide supervised NAC output rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. Approved Make & Model: Notifier / JCI(IFC series) / Schrack / Gamewell; FCM/1
85
-
470273.6
... More
Supply, Installation, Testing & Commissioning of Addressable Relay Module for AHU, Access Control, Lifts, Staircase Pressurization, Fire Suppression & other Third Party Outputs. The relay module shall provide contact rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. Approved Make & Model: Notifier / JCI(IFC series) / Schrack / Gamewell; FRM/1
90
-
559001.75
... More
Supply, Installation, Testing & Commissioning of Addressable Monitor Module for Sprinklers, Panic Bars & other Third Party Inputs. The monitor module shall monitor potential free contacts. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. Approved Make & Model: Notifier / JCI(IFC series) / Schrack / Gamewell; FMM/1
50
-
260583.53
... More
Supply, Installation, Testing & Commissioning of Isolator Module for Isolating short / dewired / loose circuits with automatic resetting arrangement. Isolator Base can also be proposed, however in that case needs to be considered with each detector & module. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. Approved Make & Model: Notifier / JCI(IFC series) / Schrack / Gamewell; ISO/X
75
-
309484.5
... More
Supply, Installation, Testing & Commissioning of Sounder cum Strobe rated at 80 dBA @ 3m for Audible annunciation and 115cd flashintg at 1 Hz for visual indication. UL Listed Approved Make & Model: SYSTEM SENSOR / Notifier / JCI; SYS/HS
75
-
348041.3
... More
Supply, Installation, Testing & Commissioning of Supply, Installation, Testing and Commissioning of Directional Sounders with 20 hz to 20 khz operating frequency with minimum 8 distinct sound patterns to indicate corridors, Exit doors, Move upward, move down ward etc. to direct Occupants for fast & safe Evacuation as specified in NFPA 72 - 2007 edition complete with Modules Approved Make & Model: Notifier / JCI(IFC series) / Schrack / Gamewell; PF24V
50
-
1838302.53
... More
Supply, Installation, Testing & Commissioning of 2W Multi-Tap (0.25W; 0.5W; 1W; 2W), Ceiling Mount Speakers. The speakers shall be of same make as that of the Control Panel & Amplifiers. They shall be compatible with supplied Amplifiers and shall work on 70.7Vrms. UL Listed Approved Make & Model: Notifier / JCI(IFC series) / Schrack / Gamewell; NF-SP100CI/UL
105
-
275264.91
... More
Supply, Installation, Testing & Commissioning of 2W Multi-Tap (0.25W; 0.5W; 1W; 2W), Wall Mount Speakers. The speakers shall be of same make as that of the Control Panel & Amplifiers. They shall be compatible with supplied Amplifiers and shall work on 70.7Vrms. UL Listed Approved Make & Model: Notifier / JCI(IFC series) / Schrack / Gamewell; SPRL
45
-
312918.3
... More
Supply, Installation, Testing & Commissioning of Response Indicator Approved Make & Model: HONEYWELL / Notifier / JCI (IFC series) / Schrack; RI/007C
600
-
154110.36
... More
Cables & Conduits, Civil and Accessories
-
-
-
... More
Supply, Laying, Testing & Commissioning of Supply of Cat6 UTP Cable Armoured Approved Make & Model: Dlink / Polycab / Finolex; UTP-CAT6
305
-
29630.57
... More
Supply, Laying, Testing & Commissioning of Supply of 1000V grade 2 core 1.5sqmm. Stranded Copper Conductor XLPE low smoke halogen free insulated with fire-rated glass mica tape, LSZH inner & outer sheathed, Armoured Fire Survival Cable confirming to BS 7846:2015, Fire Resistance as per BS 8434-2:2003, including suitable size MS saddles fixing of bolts, screw, cable glands for each detector back box complete in all respect as per site requirement. Approved Make: Polycab / Finolex / RR Cable / Rashi
10000
-
3146706
... More
All civil work including RCC Floor cutting approx 25 Mtr. Repairing and fixing in appropriate condition. Other Civil job for removal and cutting of Floor tiles as per site requirement complete in all respect.
1
-
107085
... More
Supply and Fixing in Position of 1.2mm thick M.S. hexagoanl outlet boxes for housing smoke detectros//heat detectors in the grid /POP Ceiling including providing suitable GI bracket supports on the grid etc.. Complete in all respects.
1500
-
472005.9
... More
Supply & Installation 25MM OR 32MM dia GI Conduit with all accessories concealed / exposed in F. Ceiling / Wall Complete as required including appropriate Junction Box or pull boxes with 3mm thick perspex sheet cover plate complete with 1.6 mm dia G.I. pull wire as per conduite site.
500
-
166970
... More
SUB-HEAD F - ELECTRICAL WORK
-
-
-
... More
Supply, installation & fixing of prefabricated perforated GI cable trays with tray cover of width 150 mm, 300 mm, 450 mm & 600 mm as per site requirement for laying of cables with standard rung spacings. Load for support span of 2.5 meter as 30, 60, 75 & 90 (in Kg/Mtr) respectively with concentric static load as 70 Kg at the centre, with materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge.
200
-
45267.16
... More
Supply, installation & fixing of prefabricated perforated Aluminium cable trays with tray cover of width 150 mm, 300 mm, 450 mm & 600 mm as per site requirement for laying of cables with standard rung spacings. Load for support span of 2.5 meter as 30, 60, 75 & 90 (in Kg/Mtr) respectively with concentric static load as 70 Kg at the centre, with materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge.
200
-
138409.28
... More
EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the earthing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer-in-charge, including the cost of all labour, tools, materials, etc. complete in all respect:
-
-
-
... More
50 mm X 6 mm G.I. earthing strip
100
-
34138.58
... More
40 mm X 5 mm G.I. earthing strip
250
-
59716.85
... More
25mm x 4 mm copper flat
100
-
92689
... More
25mm x 3 mm copper flat
200
-
169266.28
... More
Decorative Light fittings - Supply, installation, connection, earthing and testing of the following fittings, including supply and installation of drop pipes, hooks, fittings, fixtures, nuts,bolts, supports, on walls, outlet box for regulators and all other required materials etc. as per specifications, drawings and directions of the Site Engineer including cost of all labour, tools, materials etc. complete in all respects.Make of the fittings can be the make mentioned in the respective SOR items or equivalent model from the approved make list given in the specifications:
-
-
-
... More
LED Ceiling Point: Supply and fixing of surface/recess mounted LED ceiling light fitting type Mainstream spot Aura 15W of PHILLIPS or equivalent approved make complete with all accessories such as LED module, driver, optics, thermal sink, connector blocks etc including installation.
200
-
591644.92
... More
PVC Conduit pipes - Supply, installation, fixing in position, PVC conduit pipes, of ISI marked , in concrete, brick work etc. during or after construction by making grooves in the wall, ceiling etc. cutting threads and jointing the pipes with PVC couplers, providing necessary tees, bends, junction boxes etc. with 12 SWG GI wire inside conduit without joint for concealed wiring, including making good the concrete, brick work, surfaces etc. complete as per drawings and direction of Site Engineer / Engineer-in-charge including cost of all labour, materials etc.
-
-
-
... More
19 mm
100
-
12936.34
... More
25 mm
250
-
45925.6
... More
32 mm
50
-
11022.97
... More
Point wiring - Supplying, installation and testing with 1.5 Sq.mm stranded PVC insulated copper conductor wires for phase & neutral of 650V grade including earthing by providing 1.5 Sq.mm earth insulated continutity wire of copper in PVC conduit (Supply & installation of PVC conduit covered elsewhere in SOR) recessed on wall/ceiling/ false celing including supply & installation of switch boxes,junction boxes, pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . The circuit wiring with 4 Sq.mm PVC copper wire from D.B. to switchboard as required is also in the scope of the contractor:
-
-
-
... More
4 light points controlled by 1 switch
100
-
275006.08
... More
3 light points controlled by 1 switch
50
-
114082.4
... More
2 light points controlled by 1 switch
50
-
92419.37
... More
1 light point controlled by 1 switch
50
-
75267.48
... More
Wiring with PVC insulated 2.5 sqmm copper conductor wire for phase & neutral , 650 V grade including earthing , the third pin with 1.5 sqmm copper conductor earthing insulated continuity wire for exhaust/ wall bracket fan including providing and fixing of 5 pin 6 A modular socket and 10 A modular switch near the door or as as per specifications and drawings. The circuit wiring shall be with 4 sq. mm PVC copper wire from switchboard to 1st exhaust fan for multiple exhaust fans in one circuit.
10
-
24666.96
... More
Wiring for 250 V single phase and neutral 16 amps modular power plug point with PVC insulated 4 sq. mm. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 2.5 sq. mm copper conductor earthing insulated continuity wire, complete with providing and fixing of 6 pin 16/6A modular socket and 20/10 A modular switch (1 plug point per circuit) as per specifications and drawings.
50
-
187818.24
... More
Wiring for 250 V single phase and neutral 6 amps modular plug point with PVC insulated 2.5 sq. mm. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 1.5 sq. mm copper conductor earthing insulated continuity wire, complete with providing and fixing of 5 pin 6A modular socket and 10 A modular switch (1 plug point per circuit) as per specifications and drawings.
15
-
41003.29
... More
Supplying and drawing following size of FRLS PVC insulated, copper conductor, single core cable in the existing surface/ recessed, PVC / steel conduit / PVC casing and capping as required. Note: Only ISI marked cables shall be used.
-
-
-
... More
1 x 1.5 sq.mm
500
-
23889.1
... More
2 x 1.5 sq.mm
500
-
37553.5
... More
3 x 1.5 sq.mm
100
-
10244.76
... More
2 x 2.5 sq.mm
400
-
42196.8
... More
3 x 2.5 sq.mm
100
-
14801.92
... More
2 x 4.0 sq.mm
100
-
15821.44
... More
Cat 6 UTP (LAN) Networking Cable as per tender specifications
800
-
23146.88
... More
Supply of 2 Pair unarmoured Telephone Cable as per specifications
800
-
53402.08
... More
Installation, laying of Cat 6 LAN Cables in 16 mm/ 25 mm/ 32 mm PVC conduits from network switch through ceiling/wall/trench and post-laying end to end testing of cables. The job includes supply, installation & fixing of Duplex (2 port) Face plate (Network I/O point) (white/ cream colour) for Local Area Network including RJ45 I/O, modular plate & switch box/ gang box for fixing the face plate & accessories, supply and installation of PVC Conduits, all required materials such as fixing clamps, screws, cable straps, tags etc. as required complete in all respects as per specifications & scope of work, drawings and directions of Site Engineer/ Engineer-in-charge including cost of all labour, tools & tackles, materials etc.
800
-
98525.28
... More
Installation, laying of 2 Pair PVC insulated copper conductor un-armoured telephone cables in 16 mm/ 25 mm/ 32 mm PVC conduits from IDF through ceiling/ wall/trench and post-laying end to end testing of telephone cables. The job includes supply, installation, fixing of wall mounted telephone socket outlet with 2 port telephone jack face plate (white/ cream colour) including RJ11 I/O with modular plate & switch box/ gang box for fixing the face plate & accessories, supply and installation of PVC Conduits, all required materials such as fixing clamps, screws, cable straps, tags etc. as required complete in all respects as per specifications & scope of work, drawings and directions of Site Engineer/ Engineer-in-charge including cost of all labour, tools & tackles, materials etc.
800
-
139910.24
... More
Supply, fixing and connection of Philips/approved equivalent make LED Down lighter, suitable for Recessed mounting made of pressure diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE_Venture ranGE-Venture of 150 to 265 Volts AC, P.F 0.9, SurGE_Venture protection: 2KV, THD
-
-
-
... More
18W
100
-
240836.82
... More
15W
250
-
564343.85
... More
9W
200
-
292925.56
... More
12W
200
-
421276.52
... More
Supplying following way, horizontal type,TPN, sheet steel, MCB distribution board, 415V, with acrylic door cover, on surface/ recess, complete with tinned copper busbar, neutral busbar, earth, bar, dinbar, interconnections, powder painted etc. as required. (But without MCB/RCCB/Isolator) as per IS 8623; IS 13032; IEC 61439-3 as per direction of engineer-in-charge. Makes: Legrand/ Hager/L&T
-
-
-
... More
(8 +36) 12 Way TPN DB Horizontal with IP 42
20
-
170746.24
... More
(8 +24) 8 Way TPN DB Horizontal with IP 42
30
-
168012.29
... More
Supplying and fixing 5amps To 32amps.Rating, 240/415volts 50Hz, 10KA 'G' series, miniature circuit breaker (suitable for motor and other inductive load sand conforming to IS 8828:1996, IEC 60898:2002) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. asrequired. Note: ISI marked MCBs of Havells/Loadster/IndoKopp make shall be used as per direction of Engineer-In-Charge.
-
-
-
... More
Single pole
800
-
225398.88
... More
Supplying and fixing following rating, four pole, (three phase and neutral) 415volts, residual current circuit breaker (RCCB), ISI marked, having a sensitivity current up to indicated milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked RCCB shall be used.
-
-
-
... More
63 Amp, 4 Pole RCCB, 30mA
50
-
258507.91
... More
Copper LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density40%
-
-
-
... More
CU,3CX2.5 mm²,2XWY
500
-
55312.5
... More
CU,3CX4 mm²,2XWY
500
-
74723.5
... More
CU,4CX4 mm²,2XWY,
500
-
94099.1
... More
Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density40%
-
-
-
... More
AL,4CX16 mm²,A2XFY
200
-
22936.84
... More
AL,3.5CX25 mm²,A2XFY
200
-
29318.28
... More
AL,4CX25 mm²,A2XFY
200
-
32700.16
... More
AL,3.5CX35mm²,A2XFY
200
-
38378.32
... More
Supply, fixing and connection of Philips/approved equivalent make LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F 0.9, SurGE-Venture protection: 2KV,THD
-
-
-
... More
(36/40W (600MMX600MM) SQUARE TYPE)
400
-
2156247.04
... More
24W
200
-
443925.44
... More
12W
100
-
128342.7
... More
SUB-HEAD G - STAIRCASE PRESSURIZATION WORKS & EMERGENCY LIGHTING
-
-
-
... More
AXIAL FANS FOR PRESSURIZATION
-
-
-
... More
Supply lifting shifting and installation of tube Axial Flow fans complete with Galvanised casing, hub and blades , TEFC squirrel cage motors with Fan shall be complete with factory fitted bell mouth inlet cone to ensure uniform inlet flow & to avoid swirl at the fan inlet, back draft damper, rectangular flange connection to facilitate easy connection with duct at site, necessary vibration isolation arrangement including spring type vibration isolators and rubber grommet etc. as required. Motor shall be suitable for operation on 415±10% volts, 50Hz, 3 phase AC power supply.
-
-
-
... More
Capacity -21000 CFM @ 30 mm SP - Staircase Pressurization MAKE: Fanair /Maico /Airflow /Krugger /Humidin
4
-
611712
... More
INSTALLATION WORK
-
-
-
... More
AIR DISTRIBUTION
-
-
-
... More
Supply, installation and testing of factory fabricated ductwork of galvanised sheet metal, fire retardant gaskets, slip on flanges, GI fully threaded rods, GI channel supports etc. in accordance with the approved shop drawings and specifications.
-
-
-
... More
22 gauge galvanised sheet steel (Make Jindal/TATA)
100
-
186912
... More
24 gauge galvanized sheet steel
235
-
415950
... More
Discreet Grills -Make -Unique/Airflow
-
-
-
... More
Aluminium Grills powder coated with Aluminium Dampers
44
-
75284
... More
Supply, installation and testing of Extruded MS Louver with bird screen without Damper in accordance with the the approved shop drawings and specifications.
4
-
82600
... More
DOL STARTER L&T WITH MPCB - L&T /SEIMENS
-
-
-
... More
Upto 5.5 kW Direct online starter, 8A TP 50kA, MPCB with OLR range 5.5-8A SPP, 12A delta contactor with start, stop, on, off, trip & auto/manual push buttons.(AHU & FAN) (Weather Proof Casing)
4
-
306328
... More
Supplying, unloading, storing, laying, testing and commissioning of following sizes of 1.1 kV grade XLPE insulated, FRLS (Heavy duty) copper conductor/Aluminium armoured cables suitable for working voltage upto and including 1100 Volts, laid and tied on existing overhead cable trays; confirming to NFPA-70, BS -6724 and BS6724 including providing MS supports and clamps for fixing to supports in an approved manner, providing fire retardant sealant where required complete as required and as per specifications. Circuit identification tag should be attached with the concerned cable alongwith the test report of following sizes of cable to be submitted by the contractor at the time of delivery of material at site.
-
-
-
... More
4 core, 6 Sq.mm 2XWY- Make Polycab/Kei
320
-
207680
... More
Supply installation testing and commissioning of control cable between fire panel starter panelwithin MS conduit
700
-
289100
... More
Fabricating and installing following size of perforated G.I cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly supported from the floor as required.
-
-
-
... More
150 mm width X 50 mm depth X 1.6 mm thickness
320
-
198240
... More
Providing and fixing 8 SWG dia G.I. wire on surface or in recess for loop earthing as required.
500
-
110625
... More
Supply, fabrication, installation and testing the flexible connections constructed of fire resistant double resin sleeve as per the approved shop drawings.
8
-
43140.8
... More
Complete testing and balancing of the axial fan system and automation with fire alarm panel
4
-
181720
... More
EMERGENCY LIGHT
-
-
-
... More
Supply and installation of double fog beam with 6 inch exit display with visibility of 60 foot with inbuilt SMF 12 Volt 7 AH Exide battery with backup of 90 min.
40
-
277300
... More
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474 ,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.
150
-
62613.75
... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: (b) Fabricating and supplying serrated M.S. hot dip galvanised/Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. (d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. (e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. ?The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub-head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places. Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL (National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr 2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME-331-09 testing method for a range up to 2000 ml. 3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01-05 testing method for a range upto 2000 ml 4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm 5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test, Tests to be conducted on site. 6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml"
11
-
38906.77
... More
Providing, assembling and supplying vision glass panels (IGUS) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6 mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6 mm thick, spacer tube 12 mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge. The IGUS shall be assembled in the factory/workshop of the glass processor. ?(Payment for fixing of IGU Panels in the curtain glazing shall be paid separately as per relevant SOR item) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (i) Coloured tinted float glass 6 mm thick substrate with reflective soft coating on face # 2, + 12 mm Airgap + 6 mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement."
10
-
37467.48
... More
Extra for openable side / top hung vision glass panels (IGUS) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge.
4
-
14796.78
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: (A) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (B) Providing, fabricating, supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF/ Lumiflon based fluoropolymer resin coating of approved colour and shade on face #1 and polymer (Service) coating on face #2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (C) The fastening brackets of Aluminium alloy 6005 T5/ MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing. The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in square metre up to two decimal places.
20
-
111552.95
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%