Indian Oil Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Indian Oil Corporation Limited - IOCL Tender
Energy, Oil and Gas
Eprocure
Opening Date7 Nov 2024
Closing Date7 Jan 2025
Tender Amount₹ 6,11,28,776
Costs
EMD
₹ 1,53,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PLHO_181773_1Bid Award Id
ViewTender No
PLCC/KGPL-CSW/M/24113Tender Authority
Indian Oil Corporation Limited ViewPurchaser Address
-Website
http://https://www.iocl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Special_Instructions_to_the_Bidders_20230207_version_1a
BOQ Items
... More
"Valves: Taking delivery of valves of all types and pressure rating from the designated Centralized warehouse location within the st ate (Details of warehouse given in SCC), transporting the same to site, erecting above ground on preconstructed foundations or nde r ground including earth work in excavation and filling for under ground valves at elevations specified in the drawings, priming and painting of above ground valves, PU Painting of under ground portions (if applicab le) including all inputs, labour, material and c onsumable (other than those specifically undertaken to be supplied by the owner) and completing the work in all respects in accorda nce with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC. "
-
-
-
... More
18" x ANSI 600# MOV W/W API 6D Ball Valve
2
-
59561.7
... More
2" x ANSI 600# HOV F/F API 6D Ball Valve
1
-
2315.77
... More
4" x ANSI 600# HOV F/F API 6D Ball Valve
5
-
28009.25
... More
4" x ANSI 600# HOV W/W API 6D Ball Valve
10
-
70023.09
... More
1" x ANSI 800# HOV W/W BS 5351 BALL VALVE
15
-
13089.5
... More
MAINLINE-GROUP11-COMPOSITE-ITC
-
-
-
... More
10 MECHANICAL
-
-
-
... More
Painting: Cleaning exposed steel surfaces of piping, equipment and valves etc. by abrasive blasting or with power wire brush (wherev er abrasive blast cleaning is not possible) free of dust, grease, mill scales etc. priming with one coat of primer and painting the surfaces with two coats as per specification, with approved materials, paints, brushes, labour, equipment etc. and completing the j o b in all respects as per specification and instructions of the Site Engineer / EIC. All materials including supply of paint are in t he scope of contractor.
-
-
-
... More
Painting: Zinc Ethyl Slicate Primer_Cleaning exposed steel surfaces of piping, equipment and valves etc. by sand blasting or with po wer wire brush (wherever sand blast cleaning is not possible) free of dust, grease, mill scales etc. priming with one coat of prime r and painting the surfaces with two coats as per specification, with approved materials, paints, brushes, labour, equipment etc. an d completing the job in all respects as per specification and instructions of the Site Engineer / EIC.
74.99
-
38087.09
... More
Painting: High Build EPOXY MIO_Cleaning exposed steel surfaces of piping, equipment and valves etc. by sand blasting or with power w ire brush (wherever sand blast cleaning is not possible) free of dust, grease, mill scales etc. priming with one coat of primer an d painting the surfaces with two coats as per specification, with approved materials, paints, brushes, labour, equipment etc. and c om pleting the job in all respects as per specification and instructions of the Site Engineer / EIC.
159.99
-
58667.82
... More
Painting: Isocynate Aliphatic Poly Urethene(PU)_Cleaning exposed steel surfaces of piping, equipment and valves etc. by sand blastin g or with power wire brush (wherever sand blast cleaning is not possible) free of dust, grease, mill scales etc. priming with one c o at of primer and painting the surfaces with two coats as per specification, with approved materials, paints, brushes, labour, equ ip ment etc. and completing the job in all respects as per specification and instructions of the Site Engineer / EIC.
51.73
-
24086.33
... More
PU /liquid epoxy Coating of under ground piping: Cleaning exposed steel surfaces of piping, equipment and valves etc. by sand blasti ng or with power wire brush (wherever sand blast cleaning is not possible) free of dust, grease, mill scales etc. and applying sin g le layer polyurethane coating(PU) using 100% solvent free elastomeric plyurethane/ liquid epoxy, with approved materials, labour, eq uipment etc. and completing the job in all respects as per specification and instructions of the Site Engineer / EIC.
9
-
19031.57
... More
"Copper Strips/ Flats for Jumpers for Flanged Joints of the Product Process Piping: Supply and Installation of one copper jumper per flanged joint across the flanged joints for valves, spool piece, branch offs etc., of product process piping, The job includes cut t ing drilling of holes of required size in the copper strips/ flats for bolting purpose and complete the works in all respects as p er specifications & drawings and instructions of Site Engineer/ EIC. Note: Copper jumpers shall be installed in all the flanged joi nts of Product Process piping only and not in fire water lines. "
-
-
-
... More
Copper Strips/ Flats for Jumpers for Flanged Joits of the Product Process Piping: Up to 30 mm wide x 3 mm thick Copper strip_H1
54
-
34747.15
... More
Copper Strips/ Flats for Jumpers for Flanged Joits of the Product Process Piping: 30 - 50 mm wide x 3 mm thick Copper strip_H2
50
-
51638.57
... More
CSW-GROUP11-SERVICES-ITC
-
-
-
... More
10 INSTRUMENTATION
-
-
-
... More
Service
-
-
-
... More
Scrapper Detector Switch (18" 600#), Type: Vane, Body Material: Stainless steel, End connection: Flanged, Switch action: DPDT, Voltage:24 VDC, Current: 1A complete as per tender specifications. (BPC Bhopal-1, IPIG-2, Bina-2)
2
-
134674.72
... More
Installation, testing and commissioning of Pressure Indicator (PI) of various ratings as per directions of Engineer in-charge/ Site engineer and Drawings (BPC Bhopal-1, IPIG-3, Bina-3)
7
-
31130.12
... More
As built documentation for all stations covering a) Control /signalling cable layout drawings, b) Cable trench details, c) Cable marker details, d) Earth grid layout, e) Field instrument termination details, f) Cable schedule, g) Junction box wiring details, h) Earth resistivity measurement data, i) Field panel termination details, j) Calibration data of all instruments tested as per scope, k) OTDR Traces of the laid OFC. (BPC Bhopal-1, IPIG-1, Bina-1, 5 SV Locations-5)
4
-
519563.02
... More
20 MECHANICAL
-
-
-
... More
" Vertical Submersible type Motor Driven Water filling Pumping Unit (Q=30 KL/hr ,H= 40 MCL, Approx UnitWeight = 1 MTx1 No. = 2 MT) T aking delivery of the following pumping units with electrical motors from designated location within station premises/centralized w arehouse(details given in SCC), shifting/transporting to site, placing over Tank Nozzle, assembling together all sub-assemblies, ali gnment, grouting, levelling, checking, providing assistance for taking trial run of electrical motor on no-load, coupling the pump & motor, carrying out the trial run of the complete unit, testing, making final alignment and complete work in all respects in acc or dance with the relevant drawings, manufacturer's installation instruction, specifications and instructions of Site Engineer / EIC . Note: Weight of equipment is indicative only, Payment shall be done based on actual weight of equipment "
1
-
51913.3
... More
"Motor Driven F/F Jockey Pump Unit Installation: Taking delivery of motor driven Fire Fighting Pumping unit from designated storage location within the pump station/centralized war ehouse(details given in SCC), shifting and placing the equipments on the pre-cons tructed foundation, levelling, grouting and aligni ng the equipment, assembling together of all sub-assemblies, auxiliaries, mountin gs, fittings, interconnecting piping etc., carrying out trial run of complete unit, making final alignment, checking and testing of the complete unit and completing the work in all re spects in accordance with the specification, drawings, manufacturer's installat ion instructions, technical specifications and as per the instruction of the Site Engineer / EIC. Note: 1. The auxiliaries and moun tings shall include but not limited to pipe works etc. 2. Electrical & Instrumentation connections are not included in this item. J ockey Pump Unit with Q-10 Kls/Hr, H-105 MCL "
1
-
55946.33
... More
"Engine Driven F/F Pumping Units Installation: Taking delivery of engine driven Fire Fighting Pumping unit from designated storage location within the pump station, shifting and placing the equipments on the pre-constructed foundation, levelling, grouting and al igning the equipment, assembling together of al l sub-assemblies, auxiliaries, mountings, fittings, interconnecting piping etc., car rying out trial run of complete unit, making fin al alignment, checking and testing of the complete unit and completing the work in all respects in accordance with the specification , drawings, manufacturer's installation instructions, technical specifications and as per the instruction of the Site Engineer / EIC . Note: 1. The auxiliaries and mountings shall include but not limited to pipe wo rks etc. 2. Electrical & Instrumentation connections are not included in this item. Fire fighting Pumping Unit with Q= 450 Kl/Hr.,H = 120 MCL"
7.5
-
215796.28
... More
"Above Ground Equipments Installation: Taking delivery and transportation of equipments from designated Centralized warehouse locati on within the state (Details of warehouse given in SCC), placing on pre-constructed foundations, assembling together all sub-assemb l ies, levelling, alignment, grouting, cleaning and flushing by water, draining, checking, testing, dressing and making good of the foundation and completing the work in all respects in accordance with the relevant drawings, manufacturer's insta llation instructio n, specifications and instructions of Site Engineer / EIC. Note: Weight of equipment is indicative only, Payment shall be done based on actual weight of equipment "
-
-
-
... More
Single Basket Type Strainer - 16" x 600#
7
-
214618.84
... More
"Above Ground Equipments Installation: Taking delivery of equipments, shifting/transporting within station premises, placing on pre -constructed foundations, assembling to gether all sub-assemblies, levelling, alignment, grouting, cleaning and flushing by water, d raining, checking, testing, dressing and making good of the foundation and completing the work in all respects in accordance with the relevant drawings, manufacturer's ins tallation instruction, specifications and instructions of Site Engineer / EIC. Note: Weigh t of equipment is indicative only, Payment shall be done based on actual weight of equipment "
-
-
-
... More
Y - Type Strainer -3" X3"X150#/ 4" x4"- 150#
1
-
24092.66
... More
"Under ground piping for Fire Water Services:(with internal epoxy coating for repair at welding joints, flanges and fittings) Taking delivery of bare Pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location within sta tion premises / Centralized warehouse (as applicable) transporting the same to site, fabrication and erection of underground piping including cutting, edge preparation, bending, threading, lining up and welding, excavating, trenching in all kind of soil to specifi c depths as indicated in drawings and installing pipes and all types of pipe fittings like flanges, elbows, equal and reducing outle t tees, concentric/eccentric reducers, drain funnels, vent pipe and tapping for instrument such as pressure gauges, thermal relief v alves, thermowells etc., underground at elevations indicated in the drawing connecting with equipment nozzles, valves, vessels, in-l ine instruments etc., cleaning of coated pipes by water flushing after cleaning by compressed air hydrostatic testing of each sectio n to the specified pressure, draining the water, tie-in, back filling, restoration of site final cleaning up and disposal of water a nd surpluses, providing all inputs such as labour, materials equipment and consumable necessary to perform the work (other than thos e specifically undertaken to be supplied by the owner under the contract) .The scope shall also include cleaning of internal surface of pipes conforming to SSPC SP-10 of Flanges, fiitings and at all location where coating has been destroyed due to welding and repa iring the internal surface by application of 2-pack cold cured Isophthalic polyster acrylic co-polymer glass flake filled /Liquid ep oxy / Equivalent with coating of thickness as per specifications. The locations where internal coating repair is expected would be a t pipe end, Flanges, pipe fittings ,valve location so that the internal of pipe surface is not directly exposed to water and complet ing the work in all respects in accordance with the drawings, specifications and instructions of Site Engineer / EIC. Note:- 1) Char ges for applying polyurethane coating(PU) for exposed steel surfaces of Bare Pipes, Pipe Joints, Fittings, Flanges, equipment and va lves etc shall be paid under separate SOR Item. 2) Charges for supply of pipe with internal coating shall be paid under separate SOR items. "
-
-
-
... More
12.75" ODx 0.250" WT IS3589 FE410 Pipe U/G
60
-
367522.8
... More
"Valves: Taking delivery of valves of all types and pressure rating from the designated Centralized warehouse location within the st ate (Details of warehouse given in SCC), transporting the same to site, erecting above ground on preconstructed foundations or nde r ground including earth work in excavation and filling for under ground valves at elevations specified in the drawings, priming and painting of above ground valves, PU Painting of under ground portions (if applicab le) including all inputs, labour, material and c onsumable (other than those specifically undertaken to be supplied by the owner) and completing the work in all respects in accorda nce with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC. "
-
-
-
... More
16" x ANSI 600# MOV F/F API 6D Ball Valve
9
-
198539.09
... More
3" x ANSI 300# HOV F/F API 6D Ball Valve
2
-
7589.64
... More
"Valves: Taking delivery of valves of all types and pressure rating from the designated location within station premises / Centraliz ed warehouse (as applicable), transporting the same to site, erecting above ground on preconstructed fou ndations or underground inc luding earth work in excavation and filling for under ground valves at elevations specified in the drawin gs, priming and painting o f above ground valves, PU Painting of under ground portions (if applicable) including all inputs, labour, material and consumable (o ther than those specifically undertaken to be supplied by the owner) and completing the work in all respec ts in accordance with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC.- Globe valve "
-
-
-
... More
2"x ANSI 300# W/W BS-1873/BS EN ISO 15761 GLOBE Valve
1
-
2810.82
... More
"Valves: Taking delivery of valves of all types and pressure rating from the designated location within station premises / Centraliz ed warehouse (as applicable), transporting the same to site, erecting above ground on preconstructed fou ndations or underground inc luding earth work in excavation and filling for under ground valves at elevations specified in the drawin gs, priming and painting o f above ground valves, PU Painting of under ground portions (if applicable) including all inputs, labour, material and consumable (o ther than those specifically undertaken to be supplied by the owner) and completing the work in all respec ts in accordance with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC.- Thermal Relief Valves "
-
-
-
... More
1" x 1" Thermal Relief Valve F/F ANSI 600# x 300
16
-
33663.8
... More
1" x 1" Thermal Relief Valve F/F ANSI 300# x 300
9
-
17309.01
... More
"Installation of Valves(for Fire water Lines-Tanks & Piping) : Taking delivery of valves of all types and pressure rating from thede signated location within station premises / Centralized warehouse (as applicable), transporting the same tosite, erecting above grou nd on preconstructed foundations or undergroundincluding earth work in excavation and filling for under ground valvesat elevations s pecified in the drawings, priming and painting of aboveground valves, flood coating and wrapping of under ground portions (ifapplica ble) including all inputs, labour, material and consumable (otherthan those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the drawings,manufacturer's installation instructions and specifications andi nstructions of the Site Engineer /EIC. Note:The cost of construction of Valve foundations shall be measured &paid separately under r espective civil items. - Gate valves "
-
-
-
... More
14"x ANSI 150 # HOV F/F API 600 Gate Valve FW
1
-
15237.55
... More
12"x ANSI 150 # HOV F/F API 600 Gate Valve FW
8
-
87437.15
... More
10"x ANSI 150 # HOV F/F API 600 Gate Valve FW
3
-
25809.4
... More
6"x ANSI 150 # HOV F/F API 600 Gate Valve FW
2
-
13913.73
... More
4"x ANSI 150 # HOV F/F API 600 Gate Valve FW
20
-
94720.49
... More
3"x ANSI 150 # HOV F/F API 600 Gate Valve FW
2
-
5051.77
... More
2"x ANSI 150 # HOV F/F API 600 Gate Valve FW
2
-
4263.08
... More
"Installation of Valves(for Fire water Lines-Tanks & Piping) : Taking delivery of valves of all types and pressure rating from thede signated location within station premises / Centralized warehouse (as applicable), transporting the same tosite, erecting above grou nd on preconstructed foundations or undergroundincluding earth work in excavation and filling for under ground valvesat elevations s pecified in the drawings, priming and painting of aboveground valves, flood coating and wrapping of under ground portions (ifapplica ble) including all inputs, labour, material and consumable (otherthan those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the drawings,manufacturer's installation instructions and specifications andi nstructions of the Site Engineer /EIC. Note:The cost of construction of Valve foundations shall be measured &paid separately under r espective civil items. - Swing Check valves "
-
-
-
... More
4"x ANSI 150 # F/F BS 1868 Swing Check Valve FW
1
-
2128.78
... More
3"x ANSI 150 # F/F BS 1868 Swing Check Valve FW
1
-
3000.98
... More
2"x ANSI 150 # F/F BS 1868 Swing Check Valve FW
1
-
2000.65
... More
High Volume Long Range Foam Monitor 750 GPM capacity stand post type with inlet flange of 4" X 150# HVLR
5
-
21139.46
... More
Stand Post Type double way fire hydrant fitted with 2 Nos of single landing valve complete as per IS: 5290 alongwith 4" x 150# WNRF Flange
11
-
52771.49
... More
Development of As Built Drawings , Data Sheets etc: Development of as built drawings, data sheets, system details covering all addit ional facilities incorporated under this project in the station and furnishing them as reference document. Additionally, electronic copy of the documents shall also be furnished in compact disks- For all stations, T-Point, IPIG and SV stations
1
-
247655.5
... More
"Temporary Barricading: Providing Temporary Barricading made of GI/ steel sheet with angle iron frame (40x40x6) in panels of 1.5 to 2 .0m including lateral/ vertical angle bracing/ steel beam at bottom for stability, earth filling up to 300mm height above"
500
-
1069959.1
... More
30 ELECTRICAL
-
-
-
... More
B Service
1
-
1.18
... More
Excavation in unpaved areas of earth in work sites for conventional cable trenches for a depth upto 1.5 metres including shoring, strutting etc. (if necessary), backfilling the trench, job complete in all respects, including all labour and materials comple te as per drawings, specification and directions of Site Engineer / Engineer-in-Charge
590
-
413668.12
... More
"Cable Laying Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles,columns, in conduits, in panels and on structures etc.;including the supply and install ation of all required materials such as fixing clamps ,screws, cable straps, tags etc. as required (other than the supply of th e conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all lab our, tools, consumable materials etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge." Power cables LT : OD upto 20 mm
6165
-
222969.56
... More
"Cable Laying Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles,columns, in conduits, in panels and on structures etc.;including the supply and install ation of all required materials such as fixing clamps ,screws, cable straps, tags etc. as required (other than the supply of th e conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all lab our, tools, consumable materials etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge." Power cables LT : OD above 20 mm and upto 40 mm
5550
-
291757.95
... More
"Cable Laying Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles,columns, in conduits, in panels and on structures etc.;including the supply and install ation of all required materials such as fixing clamps ,screws, cable straps, tags etc. as required (other than the supply of th e conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all lab our, tools, consumable materials etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge." Control cables (T&I) : OD upto 20 mm
4850
-
395001.46
... More
Installation, laying of 2 Pair PVC insulated copper conductor un-armoured telephone cables in 16 mm/ 25 mm/ 32 mm PVC conduits from IDF through ceiling/ wall/trench and post-laying end to end testing of telephone cables. The job includes supply, installation, fix ing of wall mounted telephone socket outlet with 2 port telephone jack face plate (white/ cream colour) including RJ11 I/O with modu lar plate & switch box/ gang box for fixing the face plate & accessories, supply and installation of PVC Conduits, all required mate rials such as fixing clamps, screws, cable straps, tags etc. as required complete in all respects as per specifications & scope of work, drawings and d irections of Site Engineer/ Engineer-in-charge including cost of all labour, tools & tackles, materials etc. 02 Pair PVC insulated Cu unarmoured
550
-
93631.23
... More
Installation, laying of Cat 6 LAN Cables in 16 mm/ 25 mm/ 32 mm PVC conduits from network switch through ceiling/wall/trench and pos t-laying end to end testing of cables. The job includes installation & fixing of Duplex (2 port) Face plate (Network I/O point) (whi te/ cream colour) for Local Area Network including RJ45 I/O, modular plate & switch box/ gang box for fixing the face plate & access ories, supply and installation of PVC Conduits, all required materials such as fixing clamps, screws, cable straps, tags etc. as req uired complete in all respects as per specifications & scope of work, drawings and directions of Site Engineer/ Engineer-in-charge i ncluding cost of all labour, tools & tackles, materials etc. Cat-06 LAN cable in 16mm / 25mm / 32mm PVC conduit etc
400
-
48077.92
... More
Silent LT DG set : Erection, Installation including transportation from owner designated location, connecting, testing and commissi oning of owner supplied Emergency LT DG set including execution of terminal connection of power/control cable. The work shall includ e grounding of alternator neutral, earthing, providing water pipe connection for Radiator water make-up complete with valve, solenoi d valve etc. piping for fuel line, fabrication, welding, erection and painting of owner supplied support structure (including supply of shortfall support structure, if any) for exhaust piping, mounting on channels/AVM pads, installation of PLC based AMF panel, NIG panel, exhaust piping including insulation and cladding, fuel piping etc., materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge LT DG set with PLC based AMF panel, fuel tank etc
4
-
197318.61
... More
Connection and testing of 415 V AC 3 phase / 230 V AC single phase motors (including space heaters/thermistors wherever provided) / AC/DC Actuators including execution of terminal connection of control and power cables, earthing of the motor/actuator/ connecting t he thermistor, installing the controller in LT panel, earthing the motor frame, armour etc. as per the drawings, erection manuals, a nd as per directions of Site Engineer. Job complete in all respects including the cost of supplying and installation of all the requ ired FLP/WP cable glands, reducers, adapeters, end lugs, GI earthing wire / strips, labour, tools, materials, etc., as required in a ll respects for all types of motors/heaters/thermistors/actuators etc. Capacity above 1 KW and upto 2.5 KW
33
-
122527.05
... More
Connection and testing of 415 V AC 3 phase / 230 V AC single phase motors (including space heaters/thermistors wherever provided) / AC/DC Actuators including execution of terminal connection of control and power cables, earthing of the motor/actuator/ connecting t he thermistor, installing the controller in LT panel, earthing the motor frame, armour etc. as per the drawings, erection manuals, a nd as per directions of Site Engineer. Job complete in all respects including the cost of supplying and installation of all the requ ired FLP/WP cable glands, reducers, adapeters, end lugs, GI earthing wire / strips, labour, tools, materials, etc., as required in a ll respects for all types of motors/heaters/thermistors/actuators etc. Capacity above 7.5 KW but upto 50 KW
1
-
15950.57
... More
"LT Panel: Erection, installation including transportation from owner designated location, testing and commissioning of 415 V, owne r supplied power-control- centres, motor control centres, soft starters, APFC panel etc. assembling as required, installation on the already made foundation channels, aligning, levelling, grouting, assembling, making all the inter connections /outgoing/incoming po wer & control cable/ bus duct connection including making holes for cable entries as required as per drawing, specifications and dir ections of the Site Engineer/Engineer-in-Charge including cost of all materials, tools labour etc. complete in all respect including termination of all power, control cables, installation of thermistor controller, internal wiring, earthing of LT panels, supply of cable glands etc.complete as per cable schedule, drawings etc. " Weight of unit above 1000 kg but upto and including 3000 kg
2000
-
235952.8
... More
FLP & WP Distribution Board Erection, installation including within site transportation, testing and commissioning of 415 V , Flame proof distribution boards (FLP-DB) under scope of supply of bidder, assembling as required, installation on the already made founda t ion channels, aligning, levelling, grouting, assembling, making all the inter connections /outgoing/incoming power & control cable / bus duct connection including making holes for cable entries as required as per drawing, specifications and directions of the Site E ngineer/Engineer-in-Charge including cost of all materials, tools labour etc. complete in all respect including termination of al l p ower , control cables, installation of thermistor controller, internal wiring, earthing of FLP-DB panels, supply of cable glands etc .complete as per cable schedule, drawings etc.
800
-
58424.16
... More
Erection, Installation,Testing & Commissioning of the Owner supplied high mast tower with the help of suitable tools and plants, wir ing of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5 sq. mm, lugs, MCB and all labour. Scope of work shall include erection & installation of high mast tower, cable connections, erect ion & installation of luminaries & aviation lights, lightning finial, all accessories, cables, etc., erection, foundation casting & grouting of owner supplied FLP feeder pillar, end connection termination & laying of Owner supplied cable from feeder pillar to bas e compartment of high mast complete with all materials and labour as per instruction of Site Engineer/EIC. Earthing works for High Mast tower including construction of earth pits to be operated in relevant separate item. For 30 M Height High Mast Tower
2
-
152675.81
... More
Construction of shallow foundation with M20 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth complete with all materials and labour as per instruction of Site Engineer/EIC. Design of foundation shall be provided by IOCL. Piling work if required as per soil strata in foundation of high mast is not covered in this scope of work and shall be taken up separately. For 30 M Height High Mast Tower
2
-
408577.5
... More
Installation of corrosion monitoring probes including 2 Flareweld on station piping at desired location and 12 O'Clock position for mounting of ER Probe under the supervision of site engineer. Flareweld assembly shall be supplied by owner. The job complete in all respect with material, tools & tackles, consumables etc.
2
-
36023.25
... More
CSW-GROUP11-COMPOSITE-ITC
-
-
-
... More
10 CIVIL
-
-
-
... More
Earth work in excavation by mechanical m
-
-
-
... More
All kinds of soil
51.78
-
7087.78
... More
Centering and shuttering including strut
-
-
-
... More
Foundations, footings, bases of columns,
366.57
-
77362.67
... More
Steel reinforcement for R.C.C. work incl
-
-
-
... More
Thermo-Mechanically Treated bars of grad
7283.67
-
448558.81
... More
6 mm cement plaster of mix :
-
-
-
... More
1:3 (1 cement : 3 fine sand)
109.96
-
17205.22
... More
Supplying and providing non-shrinkable c
320
-
20605.63
... More
Supply and construction of sand pad foun
60.3
-
59229.74
... More
20 INSTRUMENTATION
-
-
-
... More
Composite
-
-
-
... More
INSTALLATION OF PI+PS/PT: Installation, assistance in testing and commissioning of Pressure gauges and Pressure switches (PI+PS) / Pressure Gauge and Pressure Transmitter (PI+PT) of various ratings as per the directions of Engineer-in-charge/ Site engineer and drawings. (BPC Bhopal-4, IPIG-2, Bina-2)
8
-
69342.56
... More
INSTALLATION OF PT / PS: Installation, assistance in testing and commissioning of Pressure Transmitter (PT) / Pressure Switch (PS) of various ratings as per the directions of Engineer in-charge/ Site engineer and drawings. (BPC Bhopal-10, IPIG-4, Bina-4, 5 SV Locations-10)
17
-
166425.58
... More
INSTALLATION OF DPT: Installation, assistance in testing and commissioning of Differential Pressure Transmitter (DPT) as per the directions of Engineer in-charge/ Site Engineer and drawings (BPC Bhopal-2)
2
-
28239.15
... More
INSTALLATION OF SURFACE MOUNTED TEMPERATURE TRANSMITTER: Installation and assistance in testing & commissioning of temperature elements/temperature transmitter(TT) by welding the weld pad on the surface of the pipe, silicon paste etc as per the directions of engineer in-charge/site engineer and drawings. (BPC Bhopal-1, IPIG-2, Bina-2, 5 SV Locations-5)
5
-
59856.74
... More
INSTALLATION OF SCRAPPER DETECTOR: Installation, assistance in testing and commissioning of Scrapper Detector of various ratings as per OEM recommendations, vendor drawings, directions of engineer in-charge/site engineer and other approved drawings. (BPC Bhopal-1, IPIG-2, Bina-2)
2
-
12054.2
... More
INSTALLATION OF EMERGENCY SHUTDOWN SWITCH/ MANUAL CALL POINT: Installation and testing of emergency shut - down (ESD) Push button/ Manual Call Point. This includes mounting of termination box as per the drawings, specification and instruction of Engineer in-charge/ Site engineer, replacement of broken glass covers and painting it in red colour. (BPC Bhopal-5, IPIG-2)
6
-
66766.45
... More
INSTALLATION OF FLOW METER : Taking delivery, shifting to installation site within the station premises, erecting and installing of the flow meter along with reducers and flow meter electronics/ flow transmitter. Providing assistance to control system vendor/meter supplier in testing and commissioning of the turbine/ ultrasonic / coriolis mass flow meter / clamp on ultrasonic etc.. Making structural supports and fittings, clamps, screws, nuts, bolts, making the cable supports and terminating cables at panel and field ends. Mounting the junction boxes as per Drawings,manufacturer's instructions, specification and direction/instruction of engineer in-charge/site engineer. Job shall include termination of cables at both fiels ends and control panel ends, supply of suitable size non-flame proof cable glands at control panel and the cost of all labour, tools, materials, etc. including labelling, tagging using SS plates painting, glanding, ferruling complete in all respect. (BPC Bhopal-4)
4
-
85480.43
... More
TESTING AND COMMISSIONING OF PCV / FCV: Testing of control valve and field electronics, including fabrication of all structural supports and fittings, termination of related cables at field, panel & MCC end, after loop testing as pervendors drawing and direction of the site engineer. Mounting of junction box if any, supply of non flame proof cable glands for paneland MCC end. The works includes tagging, labelling, glanding and ferruling at both panel and field ends. (BPC Bhopal-2)
2
-
45723.65
... More
Installation of explosion proof/flame proof junction boxes, non-flame proof junction box for marshalling of control cables, terminating the cables at field and control panel end, mounting the junction boxes, connecting to earthing grid by supplying and installing all the required materials such as supporting structure, cement concrete, painting, GI wire etc. (excluding supply of the Junction Boxes) in all respects complete as per specifications, drawings and direction of site Engineer including supply of suitable size non-flame proof cable glands at Control Panel end and the cost of labour, tools, materials, glanding, ferruling etc. complete in all respects. (BPC Bhopal-25, IPIG-6, Bina-6, 5 SV Locations-10)
34
-
195460.63
... More
Carrying out the instrumentation and control system jobs on the already erected actuator assembly of motor operated valves (MOVs) & Remote Operated Valves (ROVs) by making the instrument air connection (in ROVs) & necessary cable connection at field and control panel end (excluding the supply of cables) calibrating the control components, adjusting the limit switches, testing the whole assembly as per drawings specifications and direction of the engineer in-charge/site engineer co mplete in all respect, including supply of suitable size non-flame-proof cable glands, ferruls, drilling/cutting of plate for fixing glands at Control Panel end and the cost of all labour, tools, glanding, ferruling, consumables etc. (BPC Bhopal-28, IPIG-12, Bina-12, 5 SV Locations-5)
42
-
260319.35
... More
STEEL STRUCTURAL WORKS: Supply, fabrication, erection and installation of steel/GI structural works of any type and shape such as cable racks, trays, push button, control posts, ladders, lugs, chain link, fencing, angles, joints, channels, plates, flats, bars etc as required as per specifications, drawings, directions of site engineer/engineer in-charge, inlcuding cost of all labour, materials, tools, consumables etc complete in all respects. Job is inclusive of taking delivery from owner's go down and shifting to site wherever required.. (BPC Bhopal-250 KG, IPIG-50 KG, Bina-50 KG, 5 SV Locations-100 KG)
300
-
44642.94
... More
MAGNETIC PROXIMITY SWITCH: Supply & installation of Magnetic Proximity switch with suitable junction box for termination of leads/ cable for extending contact to control system for unauthorised entry of building / MOV fencing. (IPIG-2, 5 SV Locations-10)
3
-
43338.8
... More
INSTALLATION OF MANUAL CALL POINT (EXPLOSION PROOF & WEATHER PROOF): Installation of Manual Call Point (Explosion Proof & Weather Proof) in Hazardous area, terminating the cables at field and control panel end, connecting to earthing grid by supplying and installing all the required material such as supporting structure, cement concrete, painting, GI wire etc. (excluding supply of the Manual Call Point) complete in all respects as per specifications. (BPC Bhopal-3)
2
-
6979.39
... More
30 MECHANICAL
-
-
-
... More
Supply and Erection of Structural Steel: Supplying at site, steel structural items such as steel plates, bars, MS gratings, chequere d plates, angles, beams channels, commercial quality heavy pipes, C.I. Rollers, bolts & nuts, washers, grouting bolts, padding plat e s etc., fabrication and erection of saddle supports and other type of supports for pipes manifolds and valves, fabrication and ere ct ion of platforms walkways, stairways etc., sand blast/ power brush cleaning, priming and painting the finished structures includi ng supply of all other inputs such as labour, materials, consumable etc. necessary to perform and complete the work in all respect, in accordance with drawings, specifications and instructions of the Site Engineer / EIC.
18
-
1911911.8
... More
Painting: Cleaning exposed steel surfaces of piping, equipment and valves etc. by abrasive blasting or with power wire brush (wherev er abrasive blast cleaning is not possible) free of dust, grease, mill scales etc. priming with one coat of primer and painting the surfaces with two coats as per specification, with approved materials, paints, brushes, labour, equipment etc. and completing the j o b in all respects as per specification and instructions of the Site Engineer / EIC. All materials including supply of paint are in t he scope of contractor.
-
-
-
... More
Zinc Ethyl Slicate Primer
130
-
66026.43
... More
High Build EPOXY MIO
390
-
143011.75
... More
Isocynate Aliphatic Poly Urethene(PU)
390
-
181590.32
... More
"PU /liquid epoxy Coating of under ground piping: Cleaning exposed steel surfaces of piping, equipment and valves etc. by sand blast ing or with power wire brush (wherever sand blast cleaning is not possible) free of dust, grease, mill scales etc. and applying sing le layer polyurethane coating(PU) using 100% Solvent free elastomeric polyurethane/ liquid epoxy, with approved materials, labour, equipment etc. and completing the job in all respects as per specification and instructions of the Site Engineer / EIC."
54
-
114189.43
... More
"Copper Strips/ Flats for Jumpers for Flanged Joints of the Product Process Piping: Supply and Installation of one copper jumper per flanged joint across the flanged joints for valves, spool piece, branch offs etc., of product process piping, The job includes cut t ing drilling of holes of required size in the copper strips/ flats for bolting purpose and complete the works in all respects as p er specifications & drawings and instructions of Site Engineer/ EIC. Note: Copper jumpers shall be installed in all the flanged joi nts of Product Process piping only and not in fire water lines. "
-
-
-
... More
Up to 30 mm wide x 3 mm thick Copper strip
40
-
25738.63
... More
30 - 50 mm wide x 3 mm thick Copper strip
40
-
41310.86
... More
HOT/EOT CRANE: 5 Ton cap HOT crane Fire Fighting Pump Shed_Design, manufacture, inspection & testing at manufacturer's works and sup ply of HOT/ EOT cranes (having main girder beam with box type construction) as per specifications, taking delivery, shifting / tra n sporting within the pump station premises and erecting on the shed Girder, assemblies / sub-assemblies, auxiliaries, girders etc, al igning checking for free movement of the crane from one end to other and cross movement, cleaning by sand blasting, priming, pain tin g as per painting schedule testing of the crane with specified load in presence of the manufacturer's representative including p rovi ding all labour, materials, equipments and consumables necessary to perform and complete the works in all respects as per speci ficat ions, drawings and instructions of Site Engineer / EIC.
1
-
2618701.04
... More
Medium Velocity Water Sprinkler System (Automatic) : Design, Detailed Engineering, supply, fabrication, erection/Installation and co mmissioning of complete medium velocity water sprinkler systems for, barrel area, filtration, metering and piping area at each loca t ion as per the details mentioned below: Medium Velocity Water Sprinkler System: Automatic Medium velocity water Sprinkler System f or, barrel area, filtration, metering and Piping Area: Design, detail engineering, drawing and development of scheme for automatic m edium velocity water sprinkler system for the equipment and piping area including supply of all material like Deluge valve(Wet Type/ Dry Type), Spray nozzles, pressure switch, pressure gauge, piping, valves, flanges, coupling, pipe fittings, brackets, clamps, fast eners, solenoid switches, S.S piping, strainers, along with all accessories as per the approved scheme at site , erection and instal lation of piping, cabling, equipments and instruments control panel etc, provision of compressed air/pneumatic piping from owner's c ompressed air header located near compressor room for Dry Type Deluge Valve including dismantling, breaking of road etc. as required for setting out of the system and making good the same, hooking up the system with the hydrant network, sand b last cleaning, primi ng and painting (Zinc Ethyl Silicate Primer, High Build EPOXY MIO, Isocynate Aliphatic Poly Urethane(PU) in sign al red colour); int ernal coating with liquid epoxy, Carrying out all electrical and instrumentation works to enable auto actuation o f the deluge valve and medium velocity water sprinkler system based on alarm signal from QB sensors/ gas detectors/ flame detectors. Carrying out the electronic integration of the system with the control panel and providing alarm and automatic actuation of the del uge valves with manual over-ride provision, testing & commissioning of the system including cost of all labour, services, materials tools & tackles consumables, first operation & furnishing of operation and maintenance manuals on lump sum basis as per specificatio ns, Internation al standard procedures, approved scheme, drawings and the direction of Site Engineer /EIC. Note:1. The control panel and control con sole with PC will be installed under the work of Gas detection system and the MV system is to be integrated with the existing system . 2. For System Designing/Area Calculation & inter distances between block facilities refer the General layout plan and Assembly Pip ing Area of respective Station.
1
-
2514406.66
... More
Medium Velocity Water Sprinkler System (Manual): Design, Detailed Engineering, supply, fabrication, erection/Installation and commis sioning of complete medium velocity water sprinkler systems for, barrel area and piping area at each location as per the details me n tioned below: Medium Velocity Water Sprinkler System: Manual Medium velocity water Sprinkler System for, barrel area and Piping Ar ea: Design, deta il engineering, drawing and development of scheme for manual medium velocity water sprinkler system for the barrels (Scraper Launching Barrel and Scraper receiving Barrel) and piping area including supply of all material like Deluge valve(Wet Typ e), Spray nozzles, pressure switch, pressure gauge, piping, v alves, flanges, coupling, pipe fittings, brackets, clamps, fasteners, solenoid switches, S.S piping, strainers, along with all acces sories as per the approved scheme at site, erection and installation of piping, equipments etc, including dismantling, breaking of r oad etc. as required for setting out of the system and making good t he same, hooking up the system with the hydrant network, sand bl ast cleaning, priming and painting (Zinc Ethyl Silicate Primer, Hig h Build EPOXY MIO, Isocynate Aliphatic Poly Urethane(PU) in signa l red colour); internal coating with liquid epoxy. Testing & commi ssioning of the system including cost of all labour, services, mat erials tools & tackles consumables, first operation & furnishing of operation and maintenance manuals on lump sum basis as per speci fications, International standard procedures, approved scheme, d rawings and the direction of Site Engineer /EIC. Note: For System Designing/Area Calculation & inter distances between block facilit ies refer the General layout plan and Assembly Piping Area of respective Station.
1
-
1508643.99
... More
40 ELECTRICAL
-
-
-
... More
C Composite
1
-
1.18
... More
Supplying and spreading of approved quality fine dry river sand in cable trenches including the cost of all material, transport, loa d and lift charges, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge
264
-
215525.11
... More
Supply and laying of approved quality 75 mm thick second class brick flat soling with sand filling in the interstices, in cable tren ches for protectionincluding the cost of all brick and sand, labour, load and lift charges , tools and tackles etc , as per drawin g s, specification and directions of Site Engineer / Engineer-in-Charge
460
-
391972.16
... More
Supply, erection & installation of MS cable markers, including excavation, installation of the markers, cement concrete grouting, ba ckfilling, materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Enginee r / Engineer-in-Charge
84
-
201252.26
... More
Supplying, installation, testing of GI earthing electrode, including the supply and installation of the CI cover, charcoal /special backfill etc. and construction of chamber; complete as per drawings,specifications and directions of the Site Engineer, Including the cost of all labour, tools, materials etc. complete in all respects.
28
-
469368.55
... More
Supply, installation, testing of earthing system consisting of 3 earth pits of perforated GI pipes earthing electrodes and copper pl ate terminal block including construction of chamber using cement concrete with earthing pit cover and frame, supply of charcoal / / special backfill , salt etc including supply of interconnecting cables / strips including necessary welding etc complete as drawin gs , specifications and directions of the site engineer/Engineer-in-charge, including cost of tools, materials etc complete in all r esp ects as per drawing No. :9200-99900-405-030-00. The job shall also include testing of each earth pit and the entire earthing sys tem on whole. Note: Earthing for field instruments shall be provided from Station earth grid covered in Electrical SOR.
8
-
493873.33
... More
"EARTH STRIP / WIRE / ROPE / CABLE Supply, installing and testing of earthing strip/wire/rope/cable for completely making the earth ing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing e lectrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer- in-charge, including the cost of all labour, tools, materials, etc. complete in all respect. "
1
-
1.18
... More
25mm x 3 mm copper flat
145
-
93083.53
... More
GI wire (8 SWG)
80
-
5078.72
... More
Copper cable as per specifications - 100 Sq.mm
37
-
75304.33
... More
Copper cable as per specifications - 10 Sq.mm
170
-
32751.96
... More
Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (a lready made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of s ite engineer / Engineer-in-Charge.
1
-
1.18
... More
50 mm
8
-
8016.07
... More
100 mm
16.4
-
29425.68
... More
Supply and installation of shock treatment chart framed in good quality glass in English / Hindi / Local Language).
13
-
29047.67
... More
Supply and installation of vitreous enamel caution boards suitable for 440 V/11KV/6.6 KV as per IS 255 including fixing on the wal l with all the required hardware etc. complete in English / Hindi/ Local Language.
8
-
18053.34
... More
Supply and installation of approved quality stainless steel name inscription plates including anodising, engraving the inscriptions, providing screws, etc. for equipments viz. motors, motor control centres, switchgears, push button stations etc. as required, prov i ding necessary holes tapping etc. and fixing the same complete in all respect as per the direction of Site Engineer/Engineer-in-ch arge including the cost of all labour, tools etc.
7
-
7243.61
... More
Supply and installation of approved quality plastic name inscription plates including engraving the inscriptions, providing screws, etc. for equipments viz. motors, motor control centres, switchgears, push button stations etc. as required, providing necessary ho l es tapping etc. and fixing the same complete in all respect as per the direction of Site Engineer/Engineer-in-charge including the cost of all labour, tools etc.
7
-
5888.64
... More
"Point wiring Supplying, installation and testing with 1.5 Sq.mm stranded PVC insulated copper conductor wires for phase & neutral o f 650V grade including earthing by providing 1.5 Sq.mm earth insulated continutity wire of copper in PVC conduit (Supply & installat ion of PVC conduit covered elsewhere in SOR) recessed on wall/ceiling/ false celing including supply & installation of switch boxes, junction boxes, pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . The circuit wiring with 4 Sq.mm PVC c opper wire from D.B. to switchboard as required is also in the scope of the contractor."
1
-
1.18
... More
1 light point controlled by 1 switch.
6
-
8055.84
... More
2 light points controlled by 1 switch
6
-
9705.97
... More
Wiring with PVC insulated 2.5 sqmm copper conductor wire for fan points (1 fan point controlled by 1 modular switch) including provi ding space for electronic regulator in switch box , providing and fixing fan hook in the ceiling as per specifications and drawings .
7
-
14712.22
... More
Wiring with PVC insulated 2.5 sqmm copper conductor wire for phase & neutral , 650 V grade including earthing , the third pin with 1 .5 sqmm copper conductor earthing insulated continuity wire for exhaust/ wall bracket fan including providing and fixing of 5 pin 6 A modular socket and 10 A modular switch near the door or as as per specifications and drawings. The circuit wiring shall be with 4 sq. mm PVC copper wire from switchboard to 1st exhaust fan for multiple exhaust fans in one circuit.
12
-
25947.92
... More
Wiring for 250 V single phase and neutral 16 amps modular power plug point with PVC insulated 4 sq. mm. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 2.5 sq. mm copper conductor earthing insulated continuity wire, complete with providing and fixing of 6 pin 16/6A modular socket and 20/10 A modular switch (1 plug point per circuit) as per specif ications and drawings
3
-
9848.42
... More
Wiring as in item no. 1 for 250 V single phase and neutral 6 amps modular plug point with PVC insulated 2.5 sq. mm. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 1.5 sq. mm copper conductor earthing insulated conti n uity wire, complete with providing and fixing of 5 pin 6A modular socket and 10 A modular switch (1 plug point per circuit) as per s pecifications and drawings. The circuit wiring shall be with 4 sq. mm PVC copper wire from switchboard to 1st plug point for mult ipl e exhaust fans in one circuit.
3
-
7165.77
... More
FLAMEPROOF TUBELIGHT, 2x22Watt, LED, SUITABLE FOR Exd Gas Group II C, as per IS/IEC 60079-2007
4
-
39170.52
... More
FLAMEPROOF LED FITTING 125W, Ex'd' (Flameproof) Flood Light Fixture, Aluminum (LM 6), Classification:-Zone 1&2, Gas Group:-IIA/IIB, IP 65, T6. Complete with optics, Glass-Toughened Clear Well Glass, Wire Guard: M.S. Epoxy Painted-(White Color) with provision of C able Entries: 2 Nos. x 3/4 ET, Cable Glands: 2 Nos. x 3/4 ET (Max. OD 20mm) - Ex'd'(IIA/IIB), DC, Brass Nickel Plated with PVC Hood . Blanking Plug: 1 No. x3/4 ET - Ex'd', Brass Nickel Plated. Gasket: Neoprene, Hardware: SS 304, Earthing: External 2 Nos. (M6), In te rnal 1 No. (M5), Mounting Arrangement: withM.S. Bracket Suitable to Ceiling mounting (With Type 'B' Suspension Bracket / Eye Bolt ). Finish: Epoxy Powder Coated Grey Shade 631 of IS-5.
14
-
389946.67
... More
FLAMEPROOF EXHAUST FAN,12, SUITABLE FOR Exd Gas Group II C, as per IS/IEC 60079-2007
2
-
19411.66
... More
"FLP & WP JUNCTION BOX Supply, erection, installation, testing and commissioning of flameproof & weather proof junction box for pro viding cable termination of motor, including connection and termination of earthing wire and conduits etc., including supply & insta llation of double compression cable glands & flame proof plugs for sealing all spare entries complete as per drawings, specification s and direction of the Site Engineer, including the cost of all labour, tools, consumable materials etc., complete in all respect." 4 way junction box with 4 cable entries (4 x 3/4) at bottom & 20 nos. terminals.
4
-
33844
... More
"FLP/WP SWITCH CUM SOCKET : Supply, erection, installation, testing and commissioning of flameproof /weatherproof switch cum socket /welding receptacle of approved makes to be installed on walls, coloumns, structures, including supply & installation of double com pression cable glands & flame proof plugs for sealing all spare entries etc., including connection and termination of earthing wire and conduits., etc. complete as per drawings, specifications and direction of the Site Engineer, including the cost of all labour, t ools, consumable materials etc. complete in all respect. " 415V, 63A, Switch & Socket with Plug (No. of Pins 3P +N+ E), Model EPSS 1 563-61 of Baliga or Equivalent approved make
1
-
18488.66
... More
FLP/WP DISTRIBUTION BOARDS : Supply, erection, installation, testing and commissioning of flameproof /weather proof (IP-65) distrib ution board as per technical specification of types mentioned for lighting purpose in MLPU / booster shed etc., including connection and termination of power cables, earthing wire and conduits etc. including including supply & installation of double compression ca ble glands & flame proof plugs for sealing all spare entriescomplete as per drawings, spe cifications and direction of the Site Engi neer, including the cost of all labour, tools, consumable materials etc. complete in all respect. Outdoor Type, floor mounted, flame proof, weatherproof (IP 65) Lighting Distribution board Type-I DB with Bus bar - 100 A TPN, Incomer - 1 no. 63 A TPN MCB & Outgoing - 9 no. 10 A SPN, MCB
1
-
90089.6
... More
Supply, installation, testing and commissioning of swan neck lighting pole of 100mm nominal Diameter B class MS pipe (Height of bot tom of light fitting shall be 2 meters from FGL), having base Plate 200mmx200mmx5mm along with Flameproof (Exd IIA/IIB) and Weathe r proof 1x60W LED well glass light fitting complete with lamp and builtin control gear of approved make, including supply and instal la tion of earthing conductor of 8 SWG GI wire, nuts, bolts, Neck portion of lighting pole shall made up be of 50mm diameter GI pipe (ra dius of neck shall be 250mm). The pole shall be painted with 01 coat of primer and 02 coats of aluminium paint. The job shall al so i nclude supply and installation of 4 way Flameproof/weather proof junction box(with 4 cable entries) having minimum 4 Nos., 6A, 440V shrouded terminal, with double compression FLP glands/lugs with looping arrangement and supply and termination of 3C X 2.5 sq. mm. a rmoured copper PVC/XLPE insulated cable from JB to light fitting The job complete in all respects as per specifications, drawi ngs an d instructions of EIC / Site engineer.
6
-
166140.06
... More
Supply, installation, testing and commissioning of swan neck lighting pole of 100mm nominal Diameter B class MS pipe (Height of bot tom of light fitting shall be 5 meters from FGL), having base Plate 200mmx200mmx5mm along with Flameproof (Exd IIA/IIB) and Weath e rproof 2x18W LED well glass light fitting complete with lamp and builtin control gear of approved make, including supply and insta ll ation of earthing conductor of 8 SWG GI wire, nuts, bolts, Neck portion of lighting pole shall made up be of 50mm diameter GI pip e(r adius of neck shall be 250mm). The pole shall be painted with 01 coat of primer and 02 coats of aluminium paint. The job shall a lso include supply and installation of 4 way Flameproof/weather proof junction box(with 4 cable entries) having minimum 4 Nos., 6A, 440V shrouded terminal, with double compression FLP glands/lugs with looping arrangement and supply and termination of 3C X 2.5 sq. mm. armoured copper PVC/XLPE insulated cable from JB to light fitting The job complete in all respects as per specifications, drawi ngs a nd instructions of EIC / Site engineer
2
-
53943.96
... More
Ceiling fan with electronic regulator & other accessories and fittings etc. of or approved make as per appendix -1 with the followin g sweep size:- 56 Sweep
7
-
23878.09
... More
Exhaust fan Supply, installation, testing of single phase 230 V, industrial type heavy duty exhaust fan of GEC/Usha/Crompton Greaves or of approved make as per appendix -1 fitted/ provided with louvres, supports etc. including making the required opening on walls, fixing and connecting the wires etc. including earthing the body of the fan, making good the opening on the wall etc. complete as p er specifications, drawings and direction of Site Engineer including the cost of all labour, tools, materials etc. complete.
1
-
1.18
... More
18 Sweep
8
-
80883.71
... More
12 Sweep
3
-
18715.24
... More
Supply, installation and testing of Lightning arrestor on top of the MOV buiding or MOV CP buiding for diverting lightning surges to the ground. The work shall include supply of 1.2 Meter long copper lightning arrestor with 5 spronged phenyl rod base plate etc. c o mplete with necessary insulators including supply and fixing of 50 x 6 mm GI earthing strip of required length and connection to t he main earthing grid .
4
-
19786.48
... More
Galvanised mild steel frame with packing space of Min.120x240 mm with multi diameter blocks and accessories with peeling off arrange ment to adjust cable size from 3.5mm to 99mm outer dia
4
-
178081.82
... More
CSW-GROUP11-COMPOSITE-NON ITC
-
-
-
... More
10 CIVIL
-
-
-
... More
Supplying and filling in plinth with sand
8.97
-
8954.75
... More
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
... More
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
23.16
-
4686.07
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:3:6 (1 cement : 3 coarse sand (Zone-III) : 6 graded stone aggregate 20 mm nominal size)
19.9
-
106695.36
... More
1:4:8 (1 cement : 4 coarse sand (Zone-III) : 8 graded stone aggregate 40 mm nominal size)
79.4
-
386889.12
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal siz e) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
60.39
-
29593.65
... More
Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm down size) mixed with approved brand of water proofing compound @ 1Kg/50 Kg bag of cement, in roof grading, coping, in bed concrete etc. at all heights & depths , including providing centering and shuttering, scaffolding, watering, curing, vibrating, etc. complete in all respects inclusive o f cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer.
3.38
-
26584.12
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Suspended floors, roofs, landings, balconies and access platform
128
-
58818
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
166.57
-
62149.56
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
70.67
-
35979.24
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto pli nth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more
3984.61
-
245388.9
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above pl inth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500 D or more
2595.68
-
159852.94
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in :
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
18.92
-
97821.14
... More
Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) non-decorative type, core of block board construc tion with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face ven e ers on both faces of shutters:
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
6.96
-
11812.8
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrange ments for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27 . 5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 (Part-1) and M.S. top co ver of required thickness for rolling shutters.
-
-
-
... More
80 x 1.25 mm M.S. laths with 1.25 mm thick top cover
25.2
-
63510.45
... More
Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, cl addings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cu t ting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. including p re paration of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supply ing & applying painting with two coats of epoxy paint EPILUX 155 High Build Enamel over a coat of EPILUX 610 Primer of M/s BERGER o r an y other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour , mat erials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of c oncret e work).
3.24
-
376306.84
... More
Supplying, fitting and fixing hot dip galvinised barbed line wire through holes in fencing posts (already made in the body of the po st), tightening and fixing the wire in tight condition with straining bolts (straining bolts at end post) including the cost of cut t ing and lapping joints, making holes, straining bolts, galvanised staples, binding wires etc. complete in all respects inclusive o f cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Engineer-in-Charge.
1562
-
799839.28
... More
Supplying and placing in position 5.0 mm thick steel chequered plates over cable ducts, valve pits etc. including provision for lift ing arrangements complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specific a tions and directions of the Engineer-in-Charge.
50
-
244976.85
... More
Supplying, fitting and fixing punched tape concertina spiral coil of 50 turns per coil having core wire of 2.6 mm diameter made of h igh carbon spring steel of high tensile strength as per IS:4454 (Part-I, Grade-II) having minimum galvanising coating thickness equ i valent to 230 grams per square metre and low carbon steel strip of 0.5 mm thickness having a series of barbes punched all along th e length on both sides of the strip at regular interval as per IS:513, DD quality having minimum galvanising coating thickness of 12 m icrons. Hardness of tape should be between 137-180 VPN (Victor Penetration Number). The coil should be clipped sufficiently at re gul ar intervals. The coil should not be stretched for more than 6.0 m length and the minimum diameter of the coil in the closed con diti on should not be less than 600 mm complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as p er dr awings, specifications and directions of the Engineer-in-Charge.
639.51
-
284899.91
... More
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting m ortar bedding, and joints filled with acid and/or alkali resisting cement as per IS:4457, complete as per the direction of Engineer - in-Charge.
-
-
-
... More
In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)
-
-
-
... More
Acid and alkali resistant tile
29.66
-
34641.81
... More
In dado/ skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)
-
-
-
... More
Acid and alkali resistant tile
15.45
-
19231.03
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match t he shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
-
-
-
... More
25 mm thick
102.4
-
129042.48
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to IS:15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of c ement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joint with whit e cement & matching pigments etc. complete.
-
-
-
... More
Size of Tile 600x600 mm
10.74
-
13266.81
... More
Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class designation 50 la id to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all lab o ur, materials, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer.
78.5
-
48707.94
... More
Providing and laying 52 mm thick cement concrete flooring with metallic hardner, under layer of 37 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer of 15 mm thick metallic concrete hardner consi s ting of mix 1:2 (1 cement : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compound such as IRONITE NO . 1 of IRONITE CO. OF INDIA LTD. or aproved equivalent mixed in the ratio 4:1 (4 parts of cement : 1 part of metallic floor harde nin g compound of approval quality) by weight, inclusive of cost of finishing, labour, material, equipment, etc. as per specificatio ns a nd directions of the Engineer-in-Charge.
46.02
-
45154.53
... More
Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat :
-
-
-
... More
With common burnt clay F.P.S. (Non Modular) brick tiles of Class Designation 10
35
-
16250.72
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including fini shing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
-
-
-
... More
In 75x75 mm deep chase
105
-
17481.05
... More
Providing and fixing on wall face Unplasticised Rigid PVC (UPVC) rainwater pipes conforming to IS:13592 Type-A, including jointing w ith seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion: (i) Single socketed pipes :
-
-
-
... More
110 mm diameter
60.12
-
15461.98
... More
Providing and fixing on wall face Unplasticised-PVC (UPVC) moulded fittings/ accessories for Un-plasticised Rigid PVC rainwater pipe s conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion :
-
-
-
... More
Coupler :
-
-
-
... More
110 mm
12
-
1340.39
... More
Single Push-fit Coupler :
-
-
-
... More
Bend 87.5 Degrees :
-
-
-
... More
110 mm Bend
10
-
1230.62
... More
Providing and laying 20 mm thick pre-cast cement concrete tiles of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregates 1 2.5 mm nominal thickness) grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compund by w eight of cement over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) finished neat etc. complete in all respects inclusi ve of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
648.05
-
945443.26
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
-
-
-
... More
Water thinnable cement primer
1330.44
-
53486.95
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wa ll surface to prepare the surface even and smooth complete.
64.74
-
6153.28
... More
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approv ed brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
-
-
-
... More
Two coats
1502.95
-
81207.91
... More
Providing and laying design mix cement concrete of M-30 grade in roads/ taxi tracks/ runways, using cement content as per design mix , using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design c riteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by us in g needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work w ith sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wi de x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as p er di rection of the Engineer-in-Charge. [Notes: (1) Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid se parate ly. (2) Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separa tely].
-
-
-
... More
Cement concrete prepared with batch mixing machine
278.02
-
2085398.61
... More
Providing and fixing in position pre-moulded joint filler in expansion joints. (Note: Unit CM shall mean PER CENTIMETRE DEPTH PER CE NTIMETRE WIDTH PER METRE LENGTH).
124
-
297.03
... More
Construction of granular sub-base by providing close graded material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thicknes s with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per s pecifications and directions of the Engineer-in-Charge.
-
-
-
... More
With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
155.35
-
353251.48
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into t h e sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver block s as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction o f the Engineer-in-Charge.
-
-
-
... More
60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern.
1848.4
-
1520845.78
... More
Supplying & fixing in position pre-cast cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate) kerb stone of size 450 mm high, 150 mm average thick & 600 mm long, each stone joined with 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) over a base of cement mortar, including excavation, bed concrete 300 wide & 100 thick in cement concrete 1:3:6 concrete, painting of expo s d surfaces etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and d irection of Site Engineer.
1230
-
1179131.87
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid.
2
-
7440.11
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includ ing painting of fittings and brackets, cutting and making good the walls wherever require :
-
-
-
... More
White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap
7
-
13842.77
... More
Providing and fixing C.P. Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of the Engineer-in-Charge .
2
-
1730.49
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete :
-
-
-
... More
Flexible Pipe :
-
-
-
... More
32 mm diameter
7
-
557.96
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board grou nd fixed to wooden cleats with C.P. brass screws and washers complete.
6
-
5340.3
... More
Providing and fixing toilet paper holder :
-
-
-
... More
C.P. Brass (Ref. Make: JAQUAR, Model: Cat. No.-1151 or approved equivalent).
6
-
2515.88
... More
Providing and fixing soil, waste and vent pipes :
-
-
-
... More
100 mm diameter
-
-
-
... More
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS:3989
38
-
38109.96
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including al l CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & f ittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-In-Charge.
-
-
-
... More
15 mm nominal outer dia pipes-exposed
15
-
2333.21
... More
20 mm nominal outer dia pipes-exposed
23
-
4503.34
... More
Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete :
-
-
-
... More
15 mm nominal bore
2
-
625.12
... More
Providing and fixing Un-plasticised PVC (UPVC) connection pipe with brass unions:
-
-
-
... More
45 cm length :
-
-
-
... More
20 mm nominal bore
9
-
811.79
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Ref. Make: SINTEX or approved equivalent), I S:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but wit h out fittings and the base support for tank.
-
-
-
... More
Rectangular Tank
1750
-
13794.2
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms .
-
-
-
... More
15 mm nominal bore
7
-
4229.78
... More
Providing and fixing 15mm diameter C.P. brass tap as per following with C.P. brass flange including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specificatio ns and directions of the Engineer-in-Charge. :
-
-
-
... More
Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0021 or approved equivelent)
9
-
13101.15
... More
Providing and fixing 15mm diameter C.P. brass angle valve as per following with C.P. copper connecting pipe 375mm long or as require d including nuts, washers, C.P. brass flange, etc. including cutting & making good the walls wherever required, etc. complete in al l respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in- Ch arge.
-
-
-
... More
Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 0053 or approved equivalent)
13
-
19551.9
... More
Providing and fixing 15mm diameter C.P. brass stop cock with wall flange (Ref. Make: JAQUAR, Model: Cat. No. 0933 or approved equiva lent), male end with C.P. copper connecting pipe 375mm long or as required including nuts, washers, C.P. brass flange etc. includin g cutting & making good the walls wherever required complete in all respects inclusive of cost of all materials, labour, tools, tac kl es etc. as per specifications and directions of the Engineer-in-Charge.
8
-
12452.78
... More
Providing and fixing the following washroom fittings, complete in all respects; inclusive of cost of all materials, labour, tools, t ackles etc. as per specifications and directions of the Engineer-in-Charge. :
-
-
-
... More
Stainless steel liquid soap container (spring loaded push type) with lid and brackets fixed to P.V.C. cleats with C.P. brass screws, etc.
6
-
12006.19
... More
C.P. brass double coat hook (Ref. Make: JAQUAR, Model: Cat. No. 1161 or approved equivalent).
6
-
6119.1
... More
Providing and laying non-pressure NP-2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in t he proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
... More
300 mm dia. R.C.C. pipe
22
-
12413.55
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diam eter, 1.8 m long complete as per standard design. :
-
-
-
... More
With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5
3
-
67514
... More
Constructing brick masonry Septic Tank with brickwork in cement mortar 1:6 including R.C.C. 1:2:4 (1 cement : 2 sand : 4 graded coar se aggregate) top slab, C.I. cover all as per standard drawing, etc. complete in all respects inclusive of cost of all materials, l a bour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
-
-
-
... More
For 10 Users
1
-
121487.97
... More
Providing and fixing self cleaning S.C.I. heavy quality Floor/ Nahani trap with 100mm diameter inlet and 100mm diameter outlet, 125m m C.P. brass grating (heavy type) with or without vent arm including cost of cutting and making good the walls and floors, jointing with lead caulked joints, connecting with waste water pipe etc. complete in all respects inclusive of cost of all materials, labour , tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
5
-
7793.72
... More
Providing and fixing 32mm diameter (Nominal Bore) brass ball valve of approved quality complete with high pressure copper floats, co mplete in all respects inclusive of cost of all materials, labour, tools, tackles, etc. complete as per specifications and directio n s of the Engineer-in-Charge.
4
-
22938.92
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of require d dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neop re ne gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required includi ng cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectura l d rawings and the directions of the Engineer-In-Charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
For fixed portion :
-
-
-
... More
Powder coated aluminium (Minimum thickness of powder coating 50 micron)
123.58
-
51701.83
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittin gs wherever required including the cost of EPDM rubber/ neoprene gasket required. (Fittings shall be paid for separately) :
-
-
-
... More
Powder coated aluminium (Minimum thickness of powder coating 50 micron)
242.11
-
117209.03
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket et c. complete as per the architectural drawings and the directions of Engineer-In-Charge. (Cost of aluminium snap beading shall be pa i d in basic item) :
-
-
-
... More
With float glass panes of 5.50 mm thickness
36.46
-
39829.42
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS:6315, having brand logo embossed on the body/ plate with double spring mechanism and door weight up to 125 Kg, for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass piv ot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-In-Charge. :
-
-
-
... More
With stainless steel cover plate minimum 1.25 mm thickness
11
-
24590.48
... More
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per d irection of the Engineer-In-Charge.
-
-
-
... More
Powder coated (Minimum thickness 50 micron) aluminium tubular handle bar
4
-
2216.75
... More
Providing and fixing 100 mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making g ood etc. complete.
12
-
4687.67
... More
Filling the gap in between Aluminium/ Stone/ Wood frame and adjacent RCC/ Brick/ Stone/ Wood/ Ceramic/ Gypsum work by providing weat her/ structural non-sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of t h e Engineer-In-Charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600.
-
-
-
... More
Up to 5 mm depth and 5 mm width
93
-
9780.03
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, blac k finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of m e mbrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and che mi cal parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C as 650/450 N/5 cm. (b) Tear strength in longitudinal and transverse direction as 300/250N. (c) Softening point of membrane not less than 150°C. (d) Cold flexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done thr ough the authorised applicator of the manufacturer of membrane :
-
-
-
... More
3 mm thick
165.08
-
74921.82
... More
Construction of open surface drain complete as per drawing including necessary excavation, refilling, disposal of surplus earth, pro viding and laying one layer of flat brick and cement concrete 1:3:6 (150 mm thick) at bottom, lining with brick masonry in cement m o rtar 1:4 (1 cement : 4 coarse sand), plastering exposed surface with 18 mm thick cement mortar 1:4 1:4 (1 cement : 4 coarse sand) wi th a floating coat of neat cement, rounding off corners etc. complete as per specification, drawing and directions of the Site En gin eer/ Engineer-in-Charge.
-
-
-
... More
450 mm x 450 mm rectangular section radial drain.
6
-
15194.6
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refi l ling & testing of joints complete as per direction of the Engineer-In-Charge.
-
-
-
... More
100 mm nominal outer dia pipes
26
-
45778.86
... More
CSW-GROUP11-SUPPLY-ITC
-
-
-
... More
10 INSTRUMENTATION
-
-
-
... More
Supply
-
-
-
... More
Supply of Pressure Indicators (PI) of the range 0 - 100 kg/cm2 as per the technical specifications attached in the Tender.
2
-
9666.61
... More
Supply of cable glands - flame proof and weather proof including EP/WP certificates. Glands suitable for 40 C X 1.5sqmm cables. (BPC Bhopal-2, IPIG-2, Bina-2, 5 SV Locations-10)
8
-
3047.23
... More
Supply of cable glands - flame proof and weather proof including EP/WP certificates. Glands suitable for 12 C X 1.5sqmm cables. (BPC Bhopal-2, IPIG-2, Bina-2, 5 SV Locations-10)
8
-
1978.34
... More
Cable glands - suitable for 4C X 1.5
8
-
829.3
... More
Supply of Plugs - flame proof and weather proof including EP/WP certificates. Plugs 5/4" (BPC Bhopal-2, IPIG-2, Bina-2, 5 SV Locations-10)
8
-
575.18
... More
Supply of Plugs - flame proof and weather proof including EP/WP certificates. Plugs 1" (BPC Bhopal-2, IPIG-2, Bina-2, 5 SV Locations-10)
8
-
575.18
... More
Supply of Plugs - flame proof and weather proof including EP/WP certificates. Plugs 1/2" (BPC Bhopal-2, IPIG-2, Bina-2, 5 SV Locations-10)
8
-
283.01
... More
Supply of Reducers- flame proof and weather proof including EP/WP certificates. Reducers 1" to 1/2" (BPC Bhopal-2, IPIG-2, Bina-2, 5 SV Locations-10)
8
-
1908.48
... More
Supply of Reducers- flame proof and weather proof including EP/WP certificates.. Reducers 1" to 3/4" (BPC Bhopal-2, IPIG-2, Bina-2, 5 SV Locations-10)
4
-
1048.69
... More
Supply of Bushing 1" Butt Welded x 1/2" FNPT, Material: Carbon Steel, Manufacturing Process: Forged, Material Specification: A105, End Finish: Threaded, conform to ANSI 16.11 (BPC Bhopal-17, IPIG-8, Bina-8, Spare-8, 5 SV Locations-10)
29
-
2429.96
... More
Supply and placing in position 5 mm thick steel checkered plates over cable ducts / trench etc including keeping provision of holes for lifting arrangement as per drawing complete in all respect inclusive of cost of all labour, material, carriage etc as per specification & the direction of the engineer in-charge/site engineer (BPC Bhopal-5 Sq.M, IPIG-1 Sq.M, 5 SV Locations-5 Sq.M)
8
-
40694.9
... More
20 MECHANICAL
-
-
-
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document.
-
-
-
... More
2" SWMG ANSI 600#
6
-
1250.89
... More
Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical s pecifications from approved vendors specified in tender document.
-
-
-
... More
Fasteners for Flanges 14" x 150# (1.000 Dia. X 6.00 Length )
48
-
11591.38
... More
Fasteners for Flanges 12" x 150# (0.875 Dia. X 5.50 Length)
360
-
53745.7
... More
Fasteners for Flanges 10" x 150# (0.875 Dia. X 5.25 Length )
168
-
23622.28
... More
Fasteners for Flanges 8" x 150# (0.750 Dia. X 4.75 Length)
16
-
1681.64
... More
Fasteners for Flanges 6" x 150# (0.750 Dia. X 4.50 Length)
16
-
1420.15
... More
Fasteners for Flanges 4" x 150# (0.625 Dia. X 4.00 Length )
396
-
27064.86
... More
Fasteners for Flanges 3" x 150# (0.625 Dia. X 4.00 Length )
20
-
1127.84
... More
Fasteners for Flanges 2" x 150# (0.625 Dia. X 3.75 Length )
16
-
905.48
... More
Fasteners for Flanges 1 1/2" x 150# (0.500 Dia. X 3.25 Length)
8
-
579.52
... More
Supply and delivery of following mentioned Spectacle Blinds at respective stations as per Station wise Break up of material supply a nd as per technical specifications indicated in tender documents (As per ASME B16.48)
-
-
-
... More
12" Spectacle Blind 600# F/F A/G - ASTM A105
1
-
65992.27
... More
" Supply of Valves at respective stations as per technical specifications from approved vendors in the tender document - Globe Valve s "
-
-
-
... More
8"x ANSI 600# F/F BS-1873 GLOBE Valve
1
-
216764.12
... More
" Supply of Valves at respective stations as per technical specifications from approved vendors in the tender document - Thermal Rel ief Valves "
-
-
-
... More
1" x 1" 600# x300# F/F TRV
16
-
288661.8
... More
1" x 1" 300# x300# F/F TRV
9
-
122673.53
... More
Supply of Fire Fighting Monitor/hydrant
-
-
-
... More
High Volume Long Range HVLR Foam Monitor 750 GPM capacity stand post type with inlet flange of 4" X 150#
5
-
1570153.02
... More
Stand Post Type double way fire hydrant fitted with 2 Nos of single landing valve complete as per IS: 5290 alongwith 4" x 150# WNRF Flange
11
-
153665.55
... More
Supply and delivery of Fire Fighting Equipment at respective stations as per Station wise Break up of material supply and as per tec hnical specifications from approved vendors specified in tender document.
-
-
-
... More
9 kg DCP Extinguisher
11
-
45217.91
... More
4.5 kg CO2 Extinguisher
8
-
52964.25
... More
2 kg CO2 Extinguisher
16
-
83788.87
... More
2.5 kg clean agent extinguishers IS 15683 Marked
6
-
73892.05
... More
2 kg clean agent extinguishers I S 15683 Marked
4
-
44409.3
... More
Fire Hose Box for keeping 2 Nos. of 15 M Type B delivery hose and one no. jet nozzle
11
-
44851.22
... More
Type B Delivery Hoses of 15 M le ngth bearing IS-636 mark
22
-
158829.25
... More
Jet Nozzles
5
-
20925.18
... More
Fog Nozzle
2
-
12289.28
... More
Universal Nozzle
2
-
10400.24
... More
Water curtain nozzle
2
-
4416.06
... More
Sand drum with scoop
6
-
13606.98
... More
Pair of Rubber hand gloves for E lectrical work bearing IS mark
2
-
2268.34
... More
First Aid Box with Snake serum
2
-
3418.15
... More
Fire Bucket
8
-
2923.76
... More
Safety Helmet
10
-
3303.29
... More
Strecher WITH BLANKET
2
-
9459.94
... More
Explosimeter
2
-
69107.46
... More
Rescuscitor
1
-
6913.66
... More
Electrical Siren
1
-
31913.61
... More
Hand Operated siren
2
-
28413.57
... More
Water gel blanket
2
-
29025.59
... More
Positive Pressure type self cont aining Breathing Apparatus
2
-
13894.29
... More
Safety Torch
2
-
7999.64
... More
Fire Proximity suit
2
-
13894.29
... More
Wind socks
2
-
6160.36
... More
PA system/ Loudhailer/ megaphone
1
-
34737.3
... More
Red & Green flag (Pairs) 2 nos i n each colour
2
-
2709.92
... More
Extinguisher box for 9 kg DCP Ex tinguishers
7
-
31020.35
... More
CO2 cartridge - 200 gm capacity for 9 kg
7
-
4035.26
... More
Low temparature rubber hand gloves
2
-
17014.8
... More
Low temparature protective clothing
2
-
809286.53
... More
Emergency Kit: Supply and delive ry of Emergency Kit consisting oflisted emergency equipments as per Annexure-VII of OISD 117
2
-
1820213.3
... More
Corrosion Coupon: Supply of TOR Fitting Complete With Plug & Cap and Full bore Threaded Ball Valve: TOR fitting complete with Caps, Plugs, O-Rings, Nipple & 2" 600# full bore threaded ball valve.
-
-
-
... More
Supply of TOR Fitting Complete With Plug & Cap and Full bore Threaded Ball Valve: TOR fitting complete with Caps, Plugs, O-Rings, N ipple & 2" 600# full bore threaded ball valve
2
-
44120.25
... More
Corrosion Coupon: Supply of TOR Fitting Complete With Plug & Cap and Full bore Threaded Ball Valve: RETRACTABLE CORROSION COUPON HOL DER, 16"
2
-
7311.33
... More
Supply of Y-type strainer(Cast /Plate Fabricated Body), F/F connection, as per below mentioned sizes & rating and flow detail and as per technical specifications indicated in tender documents. ( Each strainer shall be supplied with 1 set of companion WNRF Flanges, Gaskets & Fasteners,02 Nos. cover Gaskets, 1 filter element)
-
-
-
... More
Y-type Strainer 10" x ANSI 150#
2
-
844344.37
... More
Y-type Strainer 4" x ANSI 150#
1
-
103658
... More
Supply and delivery of Fire Fighting Equipment at respective stations as per Station wise Break up of material supply and as per tec hnical specifications from approved vendors specified in tender document
-
-
-
... More
Jockey Pump Unit with Q-10 Kls/Hr, H-105 MCL with Spares and Commissioning Services as per technical specifications
1
-
189008.74
... More
Supply of Water filling Pumping Unit:
-
-
-
... More
Vertical Submersible type Motor Driven Water filling Pumping Unit with Spares and Commissioning Services as per technical specificat ions. (Q=30 Kl/Hr.,H= 40 MCL)
1
-
283819.98
... More
Supply and delivery of BS 5351 Ball valve for use in air line at respective stations as per Station wise Break up of material suppl y and as per technical specifications from approved vendors specified in tender document
-
-
-
... More
2" F/F ANSI 300# A/G, BALL VALVE BS 5351 Air Line HOV
1
-
17173.86
... More
1" F/F ANSI 600# A/G, BALL VALVE BS 5351 Air Line HOV
1
-
17887.23
... More
30 ELECTRICAL
-
-
-
... More
A Supply
1
-
1.18
... More
SAFETY EQUIPMENT Supplying the following Safety Equipment as per directions of Site Engineer / Engineer-in-Charge RUBBER HAND GLOVES : Rubber hand gloves suitable for 11/6.6 KV operation with ISI mark.
4
-
12853.5
... More
SAFETY EQUIPMENT Supplying the following Safety Equipment as per directions of Site Engineer / Engineer-in-Charge Insulating Elastomer mats conforming to IS 15652:2006 of thickness 2 mm (Class A)
44
-
105457.31
... More
SAFETY EQUIPMENT Supplying the following Safety Equipment as per directions of Site Engineer / Engineer-in-Charge Insulating Elastomer mats conforming to IS 15652:2006 of thickness 2.5 mm (Class B)
2
-
5475.01
... More
SAFETY EQUIPMENT Supplying the following Safety Equipment as per directions of Site Engineer / Engineer-in-Charge Supply of fully charged CO2 fire extinguishers as per specifications (4.5 kg capacity as per IS: 2878 latest)
9
-
58770.02
... More
SAFETY EQUIPMENT Supplying the following Safety Equipment as per directions of Site Engineer / Engineer-in-Charge Supply of fully charged CO2 fire extinguishers as per specifications (2 kg capacity as per IS: 2878 la test)
8
-
35878.89
... More
SAFETY EQUIPMENT Supplying the following Safety Equipment as per directions of Site Engineer / Engineer-in-Charge Supply of fire buckets mounted on stand
8
-
26916.56
... More
SAFETY EQUIPMENT Supplying the following Safety Equipment as per directions of Site Engineer / Engineer-in-Charge Supply and installation of 11/6.6 KV Discharge Rod
1
-
8745.2
... More
The flameproof (Ex'd) and weatherproof (Minimum IP-65) Distribution Boards (with Spares) made up of Cast Alluminium Alloy LM-6 with 125 A, TPN busbar, 01 no. 100 Ampere, 4 Pole MCCB suitable for termination of cable of size up to 3.5Cx50 sqmm, Aluminium Armoured cable. 01 additional spare entry suitable for 3.5CX50sqmm cable size shall be provided, which shall be plugged with flameproof and w eatherproof entry plug. 09 Nos. 32A, 3 Pole MCBs suitable for termination of 3C x 10 sq.mm., Armoured cable Breaking capacity of MC B shall be 10 kA for 1 Sec and shall be C-curve application suitable for motor duty. It shall be certified fo r application in Zone- I, Gas Group IIA & IIB, Temp class T3 and shall be of approved make as mentioned in the technical specificati ons. The item include s suply of flame proof double compression cable glands of nickel plated brass material for each cable entry 01 no. for cable entry o f size up to 3.5C x 50 sq.mm., 02 no for 3.5 C x 25 Sq mm cable, 09 no. for 3Cx10 sqmm, Aluminium armoured cabl e. Cable dimensions shall be provided at drawings approval stage. Supply shall be as per technical specifications of flameproof DB a ttached with supply specifications.
2
-
192519.22
... More
MAINLINE-GROUP-11-SERVICE-EXTRA ITEM
-
-
-
... More
10 MECHANICAL
-
-
-
... More
"Radiographic Inspection: Inspection of welding by radiographic method on all types of piping including processing of films and inte rpreting the results of we ld quality and reporting the same to the Site Engineer together with recommendations as to the acceptabil ity or otherwise of the wel ds, submitting the finished radiographic films as may be approved or directed by Engineer-in-Charge incl usive of supply of all peson nel, labour, materials, equipment, consumable, inputs, etc. and providing all services complete in all respects as envisaged in the contract documents. Note: i) Payment will be on the basis of number of welds of the respective size ra diographed and shall be all inclusive for the complete job of radiographic inspection as envisaged in the contract document. ii) Ra diography not involving full girth weld will be paid at 50% of the rate for full girth weld for the respective size. iii) For set-o n type branch welding, the rate for radiography will be as applicable to the branch pipe size. iv) Repeat radiography of individual welds due to defective films or repair of welds shall be done at contractor's cost. In case where radiography is not possible: v) V erification by utrasonic testing shall be done at contractors cost. vi) Magenetic particle inspection as and where required shall be done at Contractors cost. "
-
-
-
... More
1" NB Pipe Joints RT
100
-
46300.84
... More
"Valves: Taking delivery of valves of all types and pressure rating from the designated Centralized warehouse location within the st ate (Details of warehouse given in SCC), transporting the same to site, erecting above ground on preconstructed foundations or nde r ground including earth work in excavation and filling for under ground valves at elevations specified in the drawings, priming and painting of above ground valves, PU Painting of under ground portions (if applicab le) including all inputs, labour, material and c onsumable (other than those specifically undertaken to be supplied by the owner) and completing the work in all respects in accorda nce with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC. "
-
-
-
... More
4" x ANSI 600# HOV F/F API 6D Ball Valve
2
-
11203.7
... More
MAINLINE-GROUP-11-COMPOSITE-EXTRA ITEM
-
-
-
... More
10 MECHANICAL
-
-
-
... More
Painting: Cleaning exposed steel surfaces of piping, equipment and valves etc. by abrasive blasting or with power wire brush (wherev er abrasive blast cleaning is not possible) free of dust, grease, mill scales etc. priming with one coat of primer and painting the surfaces with two coats as per specification, with approved materials, paints, brushes, labour, equipment etc. and completing the j o b in all respects as per specification and instructions of the Site Engineer / EIC. All materials including supply of paint are in t he scope of contractor.
-
-
-
... More
"PU /liquid epoxy Coating of under ground piping: Cleaning exposed steel surfaces of piping, equipment and valves etc. by sand blast ing or with power wire brush (wherever sand blast cleaning is not possible) free of dust, grease, mill scales etc. and applying sing le layer polyurethane coating(PU) using 100% Solvent free elastomeric polyurethane/ liquid epoxy, with approved materials, labour, equipment etc. and completing the job in all respects as per specification and instructions of the Site Engineer / EIC."
21.6
-
45675.77
... More
CSW-GROUP11-SERVICE-EXTRA ITEM-ITC
-
-
-
... More
10 INSTRUMENTATION
-
-
-
... More
Service
-
-
-
... More
Installation, testing and commissioning of Pressure Indicator (PI) of various ratings as per directions of Engineer in-charge/ Site engineer and Drawings (BPC Bhopal-1, IPIG-3, Bina-3)
2
-
8894.32
... More
20 MECHANICAL
-
-
-
... More
"Under ground piping for Fire Water Services:(with internal epoxy coating for repair at welding joints, flanges and fittings) Taking delivery of bare Pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location within sta tion premises / Centralized warehouse (as applicable) transporting the same to site, fabrication and erection of underground piping including cutting, edge preparation, bending, threading, lining up and welding, excavating, trenching in all kind of soil to specifi c depths as indicated in drawings and installing pipes and all types of pipe fittings like flanges, elbows, equal and reducing outle t tees, concentric/eccentric reducers, drain funnels, vent pipe and tapping for instrument such as pressure gauges, thermal relief v alves, thermowells etc., underground at elevations indicated in the drawing connecting with equipment nozzles, valves, vessels, in-l ine instruments etc., cleaning of coated pipes by water flushing after cleaning by compressed air hydrostatic testing of each sectio n to the specified pressure, draining the water, tie-in, back filling, restoration of site final cleaning up and disposal of water a nd surpluses, providing all inputs such as labour, materials equipment and consumable necessary to perform the work (other than thos e specifically undertaken to be supplied by the owner under the contract) .The scope shall also include cleaning of internal surface of pipes conforming to SSPC SP-10 of Flanges, fiitings and at all location where coating has been destroyed due to welding and repa iring the internal surface by application of 2-pack cold cured Isophthalic polyster acrylic co-polymer glass flake filled /Liquid ep oxy / Equivalent with coating of thickness as per specifications. The locations where internal coating repair is expected would be a t pipe end, Flanges, pipe fittings ,valve location so that the internal of pipe surface is not directly exposed to water and complet ing the work in all respects in accordance with the drawings, specifications and instructions of Site Engineer / EIC. Note:- 1) Char ges for applying polyurethane coating(PU) for exposed steel surfaces of Bare Pipes, Pipe Joints, Fittings, Flanges, equipment and va lves etc shall be paid under separate SOR Item. 2) Charges for supply of pipe with internal coating shall be paid under separate SOR items. "
-
-
-
... More
12.75" ODx 0.250" WT IS3589 FE410 Pipe U/G
30
-
183761.4
... More
"Installation of Valves(for Fire water Lines-Tanks & Piping) : Taking delivery of valves of all types and pressure rating from thede signated location within station premises / Centralized warehouse (as applicable), transporting the same tosite, erecting above grou nd on preconstructed foundations or undergroundincluding earth work in excavation and filling for under ground valvesat elevations s pecified in the drawings, priming and painting of aboveground valves, flood coating and wrapping of under ground portions (ifapplica ble) including all inputs, labour, material and consumable (otherthan those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the drawings,manufacturer's installation instructions and specifications andi nstructions of the Site Engineer /EIC. Note:The cost of construction of Valve foundations shall be measured &paid separately under r espective civil items. - Gate valves "
-
-
-
... More
12"x ANSI 150 # HOV F/F API 600 Gate Valve FW
2
-
21859.29
... More
"Installation of Valves(for Fire water Lines-Tanks & Piping) : Taking delivery of valves of all types and pressure rating from thede signated location within station premises / Centralized warehouse (as applicable), transporting the same tosite, erecting above grou nd on preconstructed foundations or undergroundincluding earth work in excavation and filling for under ground valvesat elevations s pecified in the drawings, priming and painting of aboveground valves, flood coating and wrapping of under ground portions (ifapplica ble) including all inputs, labour, material and consumable (otherthan those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the drawings,manufacturer's installation instructions and specifications andi nstructions of the Site Engineer /EIC. Note:The cost of construction of Valve foundations shall be measured &paid separately under r espective civil items. - Swing Check valves "
-
-
-
... More
4"x ANSI 150 # F/F BS 1868 Swing Check Valve FW
1
-
2128.78
... More
30 ELECTRICAL
-
-
-
... More
"Cable Laying Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles,columns, in conduits, in panels and on structures etc.;including the supply and install ation of all required materials such as fixing clamps ,screws, cable straps, tags etc. as required (other than the supply of th e conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all lab our, tools, consumable materials etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge." Power cables LT : OD above 20 mm and upto 40 mm
3930
-
206596.17
... More
"LT Panel: Erection, installation including transportation from owner designated location, testing and commissioning of 415 V, owne r supplied power-control- centres, motor control centres, soft starters, APFC panel etc. assembling as required, installation on the already made foundation channels, aligning, levelling, grouting, assembling, making all the inter connections /outgoing/incoming po wer & control cable/ bus duct connection including making holes for cable entries as required as per drawing, specifications and dir ections of the Site Engineer/Engineer-in-Charge including cost of all materials, tools labour etc. complete in all respect including termination of all power, control cables, installation of thermistor controller, internal wiring, earthing of LT panels, supply of cable glands etc.complete as per cable schedule, drawings etc. " Weight of unit above 1000 kg but upto and including 3000 kg
950
-
112077.58
... More
CSW-GROUP11-COMPOSITE-EXTRA ITEM-ITC
-
-
-
... More
10 CIVIL
-
-
-
... More
Providing and laying in position specifi
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand (Zon
162.35
-
1098012.14
... More
20 INSTRUMENTATION
-
-
-
... More
Composite
-
-
-
... More
INSTALLATION OF PI+PS/PT: Installation, assistance in testing and commissioning of Pressure gauges and Pressure switches (PI+PS) / Pressure Gauge and Pressure Transmitter (PI+PT) of various ratings as per the directions of Engineer-in-charge/ Site engineer and drawings. (BPC Bhopal-4, IPIG-2, Bina-2)
1
-
8667.82
... More
INSTALLATION OF TEMPERATURE TRANSMITTER: Installation and assistance in testing & commissioning of temperature elements/temperature transmitter(TT) by making necessary holes on the pipes, welding the socket for thermowell on the pipe including supply of boss, silicon paste etc as per the directions of engineer in-charge/site engineer and drawings. (BPC Bhopal-2)
13
-
111336.8
... More
INSTALLATION OF CONTROL PANEL/ CONSOLE DESK/ UPS/ RIO/ RTU/ PLC/ ACDB: Taking delivery, shifting the panels to installation site and erection, installation, testing of Control panels/ RTU panel, mounted with all the instruments, power supply units, UPS & battery banks logic control systems , barriers, providing assistance to control system vendor for commissioning of control system including panels, control desk etc. installation on already made foundations or fixing on walls, or steel structure or fixtures aligning, levelling, grouting, inter-wiring outgoing, incoming cable terminations as required, earthing, testing, complete in all respects as per drawings, specifications and directions of the engineer in-charge/site engineer, including supply of suitable size non-flame proof cable glands for all incoming/outgoing cables and the cost of the materials, tools, labour, glanding, ferruling etc. complete in all respects.The indicated quantity is cumulative weight of panels. (BPC Bhopal-1000 KG, IPIG-500 KG, 5 SV Locations-2500 KG)
1564
-
60090.13
... More
STEEL STRUCTURAL WORKS: Supply, fabrication, erection and installation of steel/GI structural works of any type and shape such as cable racks, trays, push button, control posts, ladders, lugs, chain link, fencing, angles, joints, channels, plates, flats, bars etc as required as per specifications, drawings, directions of site engineer/engineer in-charge, inlcuding cost of all labour, materials, tools, consumables etc complete in all respects. Job is inclusive of taking delivery from owner's go down and shifting to site wherever required.. (BPC Bhopal-250 KG, IPIG-50 KG, Bina-50 KG, 5 SV Locations-100 KG)
1800
-
267857.64
... More
MAGNETIC PROXIMITY SWITCH: Supply & installation of Magnetic Proximity switch with suitable junction box for termination of leads/ cable for extending contact to control system for unauthorised entry of building / MOV fencing. (IPIG-2, 5 SV Locations-10)
6
-
86677.61
... More
30 MECHANICAL
-
-
-
... More
Supply and Erection of Structural Steel: Supplying at site, steel structural items such as steel plates, bars, MS gratings, chequere d plates, angles, beams channels, commercial quality heavy pipes, C.I. Rollers, bolts & nuts, washers, grouting bolts, padding plat e s etc., fabrication and erection of saddle supports and other type of supports for pipes manifolds and valves, fabrication and ere ct ion of platforms walkways, stairways etc., sand blast/ power brush cleaning, priming and painting the finished structures includi ng supply of all other inputs such as labour, materials, consumable etc. necessary to perform and complete the work in all respect, in accordance with drawings, specifications and instructions of the Site Engineer / EIC.
21.89
-
2325097.19
... More
40 ELECTRICAL
-
-
-
... More
Supply, installation & fixing of prefabricated perforated GI cable trays of width 150 mm, 300 mm, 450 mm & 600 mm as per site requir ement for laying of cables with standard rung spacings. Load for support span of 2.5 meter as 30, 60, 75 & 90 (in Kg/Mtr) respectiv e ly with concentric static load as 70 Kg at the centre, with materials, labour, tools and tackles, consumables etc , as per drawin gs , specification and directions of Site Engineer / Engineer-in-Charge
9782
-
1870619.69
... More
Supplying, installation, testing of GI earthing electrode, including the supply and installation of the CI cover, charcoal /special backfill etc. and construction of chamber; complete as per drawings,specifications and directions of the Site Engineer, Including the cost of all labour, tools, materials etc. complete in all respects.
11
-
184394.79
... More
"EARTH STRIP / WIRE / ROPE / CABLE Supply, installing and testing of earthing strip/wire/rope/cable for completely making the earth ing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing e lectrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer- in-charge, including the cost of all labour, tools, materials, etc. complete in all respect. "
1
-
1.18
... More
50 mm X 6 mm G.I. earthing strip
3450
-
1015510.95
... More
Copper cable as per specifications - 100 Sq.mm
393
-
799854.11
... More
Supply, erection & installation of cable conduits made up of GI pipes of medium class 'B' subject to owner's approval in trenches (a lready made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of s ite engineer / Engineer-in-Charge.
1
-
1.18
... More
100 mm
82
-
147128.42
... More
Supply, fabrication, erection, installation of steel structural works of any type and shape such as cable raks, cable trays, push bu tton control posts etc., as required job complete in all respects including the cost of all labour, tools, material etc., complete . and as per specifications and directions of site engineer/ Engineer-in-Charge.
1400
-
206863.44
... More
"Point wiring Supplying, installation and testing with 1.5 Sq.mm stranded PVC insulated copper conductor wires for phase & neutral o f 650V grade including earthing by providing 1.5 Sq.mm earth insulated continutity wire of copper in PVC conduit (Supply & installat ion of PVC conduit covered elsewhere in SOR) recessed on wall/ceiling/ false celing including supply & installation of switch boxes, junction boxes, pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . The circuit wiring with 4 Sq.mm PVC c opper wire from D.B. to switchboard as required is also in the scope of the contractor."
1
-
1.18
... More
2 light points controlled by 1 switch
6
-
9705.97
... More
Wiring for 250 V single phase and neutral 16 amps modular power plug point with PVC insulated 4 sq. mm. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 2.5 sq. mm copper conductor earthing insulated continuity wire, complete with providing and fixing of 6 pin 16/6A modular socket and 20/10 A modular switch (1 plug point per circuit) as per specif ications and drawings
7
-
22979.65
... More
Wiring as in item no. 1 for 250 V single phase and neutral 6 amps modular plug point with PVC insulated 2.5 sq. mm. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 1.5 sq. mm copper conductor earthing insulated conti n uity wire, complete with providing and fixing of 5 pin 6A modular socket and 10 A modular switch (1 plug point per circuit) as per s pecifications and drawings. The circuit wiring shall be with 4 sq. mm PVC copper wire from switchboard to 1st plug point for mult ipl e exhaust fans in one circuit.
7
-
16720.14
... More
LED light fittings, Batten with 2XTLED-TMC501-2X TLED-36 W P3242 or equiavlent approved make with LEDs: Supply and fixing of wall mo unted/ suspended type weather proof light 2XTLED-TMC501-2X TLED or equiavlent approved make with LEDs, 36 W or more. LED Fitting o f PHILLIPS or equivalent approved make complete with all accessories such as LED module, driver, optics, thermal sink, connector bl oc ks etc including installation with LED of approved make.
29
-
101776.78
... More
12 Inch Oscillating wall mounted bracket fan, noiseless, plastic moulded construction, rotary device for 3 step speed control integr ated unit of approved make with all accessories complete in all respect.
1
-
8888.69
... More
Supplying and laying reinforced cement concrete light duty hume pipe, non pressure type (NP3), centrifugally cast conforming to I.S .458 with 1:3:6 concrete casing at joints as required with necessary slope including excavation, backfilling, supply of collars, jo inting of pipes with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement: 2 fine sand), testing of joints, complete i n all respects as per specifications, drawing and the direction of the EIC/Site Engineer. 300 mm dia
104
-
286475.11
... More
CSW-GROUP11-COMPOSITE-EXTRA ITEM-NON ITC
-
-
-
... More
10 CIVIL
-
-
-
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
... More
Along the external wall where apron is not provided using chemical emulsion @ 7.5 litres/ sqm of the vertical surface of the substru cture to a depth of 300 mm including excavation channel along the wall & rodding etc. complete:
-
-
-
... More
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
3403
-
62160.56
... More
Supplying and filling selected earth/ moorum (excluding black cotton soil) from Contractor's own borrow areas including royalty, wit h all leads and lifts in low laying areas and filling to required grade and level including watering, compacting at optimum moistur e content to 90% of Proctor's density, consolidation and rolling with 8 to 10 tonne power roller in layers not exceeding 20 cm th ic kness, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications a nd direction of Site Engineer.
3502.24
-
1439936.87
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:2:4 (1 cement : 2 coarse sand (Zone-III) : 4 graded stone aggregate 20 mm nominal size)
294.08
-
1754262.44
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal siz e) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
68.9
-
33765.87
... More
Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm down size) mixed with approved brand of water proofing compound @ 1Kg/50 Kg bag of cement, in roof grading, coping, in bed concrete etc. at all heights & depths , including providing centering and shuttering, scaffolding, watering, curing, vibrating, etc. complete in all respects inclusive o f cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer.
3.39
-
26662.71
... More
Providing and laying 40 mm thick CC 1:2:4 Damp Proof Course with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone ch ips 6 mm down size) laid to proper level & line including providing shuttering, applying two coats of bitumen applied @ 1.50 Kg/sqm and spreading an even layer of coarse sand over hot bitumen, etc. complete in all respects inclusive of cost of all labour, materia l s, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer.
7.37
-
4398.83
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishi ng and reinforcement - All work up to plinth level :
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III): 3 graded stone aggregate 20 mm nominal size)
82.12
-
555390.57
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fille ts, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centerin g , shuttering, finishing and reinforcement :
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III) : 3 graded stone aggregate 20 mm nominal size)
73.3
-
569960
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 Degree landings, balconies, shelves, chajjas , lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the co s t of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III) : 3 graded stone aggr eg ate 20 mm nominal size)
89.56
-
720293.73
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
71.57
-
15103.5
... More
Weather shade, Chajjas, corbels, etc. including edges.
33.82
-
19201.31
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to fl oor V level in all shapes and sizes in :
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
41.02
-
249189.69
... More
Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) non-decorative type, core of block board construc tion with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face ven e ers on both faces of shutters:
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
3.77
-
6398.6
... More
Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, cl addings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cu t ting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. including p re paration of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supply ing & applying painting with two coats of epoxy paint EPILUX 155 High Build Enamel over a coat of EPILUX 610 Primer of M/s BERGER o r an y other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour , mat erials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of c oncret e work).
24.55
-
2848699.64
... More
Supplying, fitting and fixing hot dip galvinised barbed line wire through holes in fencing posts (already made in the body of the po st), tightening and fixing the wire in tight condition with straining bolts (straining bolts at end post) including the cost of cut t ing and lapping joints, making holes, straining bolts, galvanised staples, binding wires etc. complete in all respects inclusive o f cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Engineer-in-Charge.
839.84
-
430049.31
... More
In dado/ skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)
-
-
-
... More
Acid and alkali resistant tile
28.12
-
34992.65
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match t he shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
-
-
-
... More
25 mm thick
12
-
15123.57
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cemen t: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and pol i shing complete.
8.68
-
11700.37
... More
Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, i n skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey ce ment slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete.
66.52
-
53911.78
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of first quality conforming to IS:15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including pointing the joints with white cement and ma t ching pigment, etc. complete.
23.51
-
17609.66
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 ce ment : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
... More
Size of Tile 600x600 mm
44.5
-
54199.1
... More
Providing and laying 20 mm thick pre-cast cement concrete tiles of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregates 1 2.5 mm nominal thickness) grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compund by w eight of cement over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) finished neat etc. complete in all respects inclusi ve of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
70.53
-
102893.64
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :
-
-
-
... More
1:6 (1 cement : 6 fine sand)
79.95
-
16112.1
... More
Finishing walls with textured exterior paint of required shade :
-
-
-
... More
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
792.11
-
129846.62
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :
-
-
-
... More
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
1960.73
-
204920.99
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wa ll surface to prepare the surface even and smooth complete.
841.29
-
79964.15
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into t h e sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver block s as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction o f the Engineer-in-Charge.
-
-
-
... More
60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern.
2742
-
2256091.28
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid.
2
-
7440.11
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includ ing painting of fittings and brackets, cutting and making good the walls wherever require :
-
-
-
... More
White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap
4
-
7910.15
... More
Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by the Engineer-in-Charge.
5
-
1386.26
... More
Providing and fixing C.P. Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of the Engineer-in-Charge .
4
-
3460.99
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete :
-
-
-
... More
Flexible Pipe :
-
-
-
... More
32 mm diameter
4
-
318.84
... More
Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS-15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Eng i neer-in-Charge.
-
-
-
... More
2025 (25 mm OD) pipe
40
-
11512.08
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including al l CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & f ittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-In-Charge.
-
-
-
... More
15 mm nominal outer dia pipes-exposed
15
-
2333.21
... More
20 mm nominal outer dia pipes-exposed
10
-
1957.97
... More
Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete :
-
-
-
... More
15 mm nominal bore
2
-
625.12
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Ref. Make: SINTEX or approved equivalent), I S:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but wit h out fittings and the base support for tank.
-
-
-
... More
Rectangular Tank
750
-
5911.8
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms .
-
-
-
... More
15 mm nominal bore
2
-
1208.51
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS-8931 :
-
-
-
... More
15 mm nominal bore
6
-
3105.71
... More
Providing and fixing C.P. brass Towel Ring 300mm diameter, fixed to P.V.C. cleats with C.P. brass screws, etc. complete.
6
-
8038.49
... More
Providing and laying non-pressure NP-2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in t he proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
... More
300 mm dia. R.C.C. pipe
8
-
4514.02
... More
Constructing brick masonry Septic Tank with brickwork in cement mortar 1:6 including R.C.C. 1:2:4 (1 cement : 2 sand : 4 graded coar se aggregate) top slab, C.I. cover all as per standard drawing, etc. complete in all respects inclusive of cost of all materials, l a bour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
-
-
-
... More
For 30 Users
1
-
138054.52
... More
For 10 Users
1
-
121487.97
... More
Providing and fixing 32mm diameter (Nominal Bore) brass ball valve of approved quality complete with high pressure copper floats, co mplete in all respects inclusive of cost of all materials, labour, tools, tackles, etc. complete as per specifications and directio n s of the Engineer-in-Charge.
2
-
11469.46
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of require d dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neop re ne gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required includi ng cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectura l d rawings and the directions of the Engineer-In-Charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
For fixed portion :
-
-
-
... More
Powder coated aluminium (Minimum thickness of powder coating 50 micron)
49.03
-
20511.54
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittin gs wherever required including the cost of EPDM rubber/ neoprene gasket required. (Fittings shall be paid for separately) :
-
-
-
... More
Powder coated aluminium (Minimum thickness of powder coating 50 micron)
117.96
-
57103.3
... More
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per d irection of the Engineer-In-Charge.
-
-
-
... More
Powder coated (Minimum thickness 50 micron) aluminium tubular handle bar
26
-
14408.86
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, blac k finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of m e mbrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and che mi cal parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C as 650/450 N/5 cm. (b) Tear strength in longitudinal and transverse direction as 300/250N. (c) Softening point of membrane not less than 150°C. (d) Cold flexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done thr ough the authorised applicator of the manufacturer of membrane :
-
-
-
... More
3 mm thick
235.75
-
106995.97
... More
Providing and fixing 75mm diameter P.V.C. pipe (4 Kg/sq.cm) for Weep Holes in Masonry/ RCC wall including providing 230x230x230 mm s ize (approx.) filter using pebles of 40mm & down size in every weep hole on retaining side etc. complete in all respects inclusive o f cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.
33.6
-
9234.02
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refi l ling & testing of joints complete as per direction of the Engineer-In-Charge.
-
-
-
... More
100 mm nominal outer dia pipes
36
-
63386.11
... More
CSW-GROUP11-SUPPLY-EXTRA ITEM-ITC
-
-
-
... More
10 INSTRUMENTATION
-
-
-
... More
Supply
-
-
-
... More
Supply of Pressure Indicators (PI) of the range 0 - 100 kg/cm2 as per the technical specifications attached in the Tender.
7
-
33833.13
... More
Supply and placing in position 5 mm thick steel checkered plates over cable ducts / trench etc including keeping provision of holes for lifting arrangement as per drawing complete in all respect inclusive of cost of all labour, material, carriage etc as per specification & the direction of the engineer in-charge/site engineer (BPC Bhopal-5 Sq.M, IPIG-1 Sq.M, 5 SV Locations-5 Sq.M)
9
-
45781.76
... More
20 MECHANICAL
-
-
-
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document.
-
-
-
... More
2" SWMG ANSI 600#
12
-
2501.79
... More
Supply and delivery of Fire Fighting Equipment at respective stations as per Station wise Break up of material supply and as per tec hnical specifications from approved vendors specified in tender document.
-
-
-
... More
Fog Nozzle
3
-
18433.91
... More
Universal Nozzle
9
-
46801.07
... More
Electrical Siren
1
-
31913.61
... More
30 ELECTRICAL
-
-
-
... More
Supplying the following Safety Equipment as per directions of Site Engineer / Engineer-in-Charge Insulating Elastomer mats conformin g to IS 15652:2006 of thickness 2.5 mm (Class B)
2
-
5475.01
... More
Supplying the following Safety Equipment as per directions of Site Engineer / Engineer-in-Charge Supply of fully charged CO2 fire ex tinguishers as per specifications (4.5 kg capacity as per IS: 2878 latest)
2
-
13060
... More
The flameproof (Ex'd) and weatherproof (Minimum IP-65) Distribution Boards (with Spares) made up of Cast Alluminium Alloy LM-6 with 125 A, TPN busbar, 01 no. 100 Ampere, 4 Pole MCCB suitable for termination of cable of size up to 3.5Cx50 sqmm, Aluminium Armoured cable. 01 additional spare entry suitable for 3.5CX50sqmm cable size shall be provided, which shall be plugged with flameproof and w eatherproof entry plug. 09 Nos. 32A, 3 Pole MCBs suitable for termination of 3C x 10 sq.mm., Armoured cable Breaking capacity of MC B shall be 10 kA for 1 Sec and shall be C-curve application suitable for motor duty. It shall be certified fo r application in Zone- I, Gas Group IIA & IIB, Temp class T3 and shall be of approved make as mentioned in the technical specificati ons. The item include s suply of flame proof double compression cable glands of nickel plated brass material for each cable entry 01 no. for cable entry o f size up to 3.5C x 50 sq.mm., 02 no for 3.5 C x 25 Sq mm cable, 09 no. for 3Cx10 sqmm, Aluminium armoured cabl e. Cable dimensions shall be provided at drawings approval stage. Supply shall be as per technical specifications of flameproof DB a ttached with supply specifications.
2
-
192519.22
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements