Hapur Pilakhua Development Authority Tender

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 140 TO 150 Watt. Confirming to IP 65 and above Protection complete in all respects CAT- AAA PWD SOR S.I. No. 1454/2018

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-incharge.PWD SOR S.I. No. 503/2018

10 sq. mm

M.S. or iron work of heavy size such as trusses , built up gates, record racks, roof work , Gates including rivetting or welding where necessary, PWD SOR Civil S.I. No. 503 /2017 ( Roaled Steel Beam Size 150 x 50 mm )

Supply and burying of 40mm dia x 4.5 meters long G.I. pipe vertically for earthing having 12 mm dia. holes spaced 75 mm apart drilled up to 2 meter from the bottom complete with earthing lead of No. 6 to 8 SWG GI wire in G.I. pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) up to switch board, 30 cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal / coke and salt at least 150 mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. PWD SOR S.I. No. 701/2018

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. DSR S.I. No. 14.15.1/2018

63 mm dia (OD-63 mm & ID-51 mm nominal) @109-4%=104.64

Cement concrete with 2 cm gauge approved stone grit coarse sand & cement in the proporetion of 4:2:1including supply of all material labour tool and plant etc. required proper completion of the work. SIN-279(a)

Supply and erection of 600 mm long cross arm of 50 mm x 50mm x 6 mm mild steel angle iron with necessary clamps, bolts, nuts etc. on poles complete in all respects including painting with aluminium paint. PWD SOR S.I. No. 625/2018

S/F of Rectanguler 50 x50 x6mm M.S. angle iron and 50x5mm M.S. flate iron pole top bracket for 4 No. flood light.

S/F of 32 Amp. 415 V metal clad T.P.N. rewireable type switch fuse unit on angle iron bracket complete in all respects. CAT -B PWD SOR S.I. No. 315/2018

Detailed Specfication of LED Street Light

S/F of 45-50 watt factory wired LED light fitting, having pressure di-cast aliminium housing, complete LED light fitting must be approved from Bueru of Indian Standard- IS-10322(Part 5/Section 3) 2012 and conforming IP-66/67 proctection level, follow LM-78/79 test report and approved in AAA catagary in UP PWD Lucknow. LED fixture must have proper heat desipation. working temprature 5-50 degree celcious, having surge proection, for electronic driver, Surge protection device having 10 KA rating. Driver efficency more then 85%, CR70, Driver must have voltage regulation from 140-280 v, 50 Hz. , lumen out put of LED module must be 100-Lum per Watt, warm white colour, Each LED module must have optical lance for uniform distribution of light. These LED light fixture will be installed on the 50mm dia- 5mm thickness B class GI pipe bracket bended on suitable angle fixed with 50mm x 6mm iron pole clamp (2 set) with nuts and bolts. For connection of these LED light having 40/76 fiexible copper wire or 2.5mm strended 2 core- pvc insulated PVC sheathed aluminum cable with suitable langht.