East Central Railway Tender

DRM/Engineering acting for and on behalf of The President of India invites E-Tenders against Tender No 15-MGS-SRDEN1-19-20 Closing Date/Time 18/10/2019 12:00 Hrs. Bidders will be able to submit their original/revised bids upto closing date and time only. Manual offers are not allowed against this tender, and any such manual offer received shall be ignored. Contractors are allowed to make payments against this tender towards tender document cost and earnest money only through only payment modes available on IREPS portal like net banking, debit card, credit card etc. Manual payments through Demand draft, Banker cheque, Deposit receipts, FDR etc. are not allowed. 1. NIT HEADER Name of Work Provision of anti flood measure like De-watering System, cover shed etc. at newly constructed LHS/RUB no 2 and 21 in ARA-SSM section under ADEN/XBKJ Bidding type Normal Tender Tender Type Open Bidding System Single Packet System Tender Closing Date Time 18/10/2019 12:00 Date Time Of Uploading Tender 25/09/2019 20:56 Pre-Bid Required No Pre-Bid Query Date Time Not Applicable Advertised Value 12818840.59 Tendering Section WORKS I Bidding Style Single Rate for Each Schedule Bidding Unit Earnest Money (Rs.) 214100.00 Validity of Offer ( Days) 45 Tender Doc. Cost (Rs.) 5000.00 Period of Completion 4 Months Contract Type Works Contract Category Expenditure Bidding Start Date 04/10/2019 Are Joint Venture (JV) firms allowed to bid No Ranking Order For Bids Lowest to Highest Expenditure Type Capital (Works) 2. SCHEDULE S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit Schedule B-All SOR ITEMS AS schedule A 12818840.59 Above/ Below/Par 1 109200 1200.00 Sqm 713.34 856008.00 11.27 952480.10 Item Description:- Providing and fixing permanently colour coated trapezoidal profiled sheet of depth 28-30mm at 195-205mm pitch distance with precisely engineered "Rib & Flute" design. Profiled sheets shall be min. 0.5mm TCT/0.45mm BMT high tensile zinc aluminium alloy coated zincalume / galvalume steel sheet (550 mpa yield strength) having a coating of mass of 150 gsm zinc-aluminium coating AZ-150 total on both sides as per, AS 1397:1993 finished with 20 microns approved colour coating of Silicon Modified Polyester (SMP) / Super Polyester paint coat on exposed surface over a primer coat of 5 microns and a back coat of 5 microns on reverse side over a 5 microns primer coat. There shall be 2 small ribs/square flutes between profiles for providing additional strength. The sheet to be fixed over the purlins with hexagonal head self drilling suitable fasteners with neoprene / EPDM washer on crests of the sheet 2 101091 150.00 Metre 392.70 58905.00 11.27 65543.59 Item Description:- Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm +/- 5% total coated thickness (TCT) thick Zinc coating 120 gsm as per IS:277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : Ridges plain (500-600mm) 3 081031 35000.00 Kg 87.27 3054450.00 11.27 3398686.52 Item Description:- Structural steel work welded in built up sections, trusses and framed work, girders, stagings, racks, etc including cutting, bending, straightening, hoisting, fixing in position, including applying a priming coat of approved steel primer, complete - upto 6m height above GL In RSJ, tees, angles and channels 4 081032 4500.00 Kg 84.23 379035.00 11.27 421752.24 Item Description:- Structural steel work welded in built up sections, trusses and framed work, girders, stagings, racks, etc including cutting, bending, straightening, hoisting, fixing in position, including applying a priming coat of approved steel primer, complete - upto 6m height above GL In flats, plates , round or square bars 5 121091 3000.00 Sqm 42.95 128850.00 11.27 143371.40 I