Dakshinanchal Vidyut Vitran Nigam Limited Tender

Carriage of 25 KVA Transformer from Store Centre, Mathura to pit site with loading & unloading at both ends

Carriage of 100 KVA Transformer from Store Centre, Mathura to pit site with loading & unloading at both ends

Carriage of 250 KVA Transformer from Store Centre, Mathura to pit site with loading & unloading at both ends

Carriage of Line material i.e. conductor, G.I. wire TPMO stay rod, disc insulator, cross arm, Angle channel and other required material from Store Center at 132 KV substation Mathura to the site of work including loading and unloading of material at both ends.

Erection of single pole structure 8.5 Mtrs on PCC Pole by digging of pits fitting of all relevant accessories as per RESPO norms.

Erection of single pole structure 9/11 Mtrs on ST Pole by digging of pits fitting of all relevant accessories as per RESPO norms.

Erection of Double pole structure 8.5 Mtrs on PCC Pole by digging of pits fitting of all relevant accessories as per RESPO norms.

Erection of Double pole structure 9/11 Mtrs on ST Pole by digging of pits fitting of all relevant accessories as per RESPO norms.

Construction of Section pole/“T” pole for L.T./H.T. line on the erected pole as per RESPO manual and as per direction of supervising engineer. It including the cost of all labour, T&P, etc. required for proper completion of work.

Installation of stay set with grouting and nuzzling etc. as per RESPO drawing along with all routine material to be used for such works.

Earthing of poles by fixing earthing rods and binding with earth wire as per standard norms including cost of labour T&P and required material for such work.

Laying, sagging stringing and binding of ACSR Weasel Conductor on the erected PCC pole/STP including jumpering as per RESPO manual.

Laying, sagging stringing and binding of ACSR Dog Conductor on the erected PCC pole/STP including jumpering as per RESPO manual.

Laying, sagging stringing and binding of Arial Bunch Conductor on the erected PCC pole/STP including jumpering as per RESPO manual.

Laying, sagging stringing and binding of LT PVC Cable on the erected PCC pole/STP including jumpering as per RESPO manual.

Chopping of Tree branches to Clear the route properly.

Mounting of 16 KVA Transformer on the Double pole/Plinth structures and connections thereof.

Mounting of 25 KVA Transformer on the Double pole/Plinth structures and connections thereof.

Mounting of 100 KVA Transformer on the Double pole/Plinth structures and connections thereof.

Mounting of 250 KVA Transformer on the Double pole/Plinth structures and connections thereof.

Cutting of CC Road for making depth foundation for erection of pole.

Grouting of PCC/ST pole in ratio 1:4:8 cement, sand and brick ballast as per standard norms, including cost of all grouting material.

Construction of plinth of 250 KVA T/f size 5’x5’x4’ above ground level and one. Ft. below the ground level of 9’’ after excavation of 4 earth brick ballast shall be provided and hammering will be done properly. After that a retaining wall of 9 width by first class brick in ratio 1:4 of cement and sand shall be made. The earth shall be filled up to one ft. below the top of the plinth. after this brick ballast shall be provided upto 6 from the earth level and proper hammering shall be done. One No. Jall of 12 mm. MS tore shall be fixed in the hollow of plinth and one. Ft. thick RCC in ration of cement, sand and stone ballast shall be laid on the top of the plinth. The 12 mm. thick plastering shall be done all around the plinth in 1:4 ratio of cement and sand. The contractor shall be responsible to complete the work as per direction of Supervision Engineer. It includes the cost of all material, labour, T & P, carrier etc. required for proper completion of work.

Body and neutral earthing of 250 KVA and above transformer installed by digging of pit up to water level depth (approx. 100 FT) and then inserting 1-1/4” dia GI pipe of “B” grade, conforming to the requirement of IS specification and then connecting the top of the inserted pipe and transformer body through GI strip of size 50 x 6 mm with the help of nut and bolt or through gas welding, as per direction of supervising engineer. It includes the cost of all material, laborer, T&P, carrier etc. required for proper completion of work.

Making of wire mesh fencing around constructed 250 KVA T/f plinth 4mtr. x 3 mtr. with proper grouting Erection and construction of Toe-wall around the transformer plinth including digging of pits and making wall 9 inch wide & 30 cm. under the ground level and 30 cm. up to the ground level and making pocket Filling the concreting for grouting of wire mesh fencing and plastering around the wall in ratio 1:4 cement and sand providing of one no. main gate in the wire mesh fencing for shifting the transformer size of gate 8 ft. x 4ft. including fixing of dandala for locking system, (Size of angle iron 50x50x6mm. and size of wire mesh fencing 1.5x2 sq. inch wire gauge 10 SWG.) All material/labour will be arranged by the contractor.

Re-nuzzling of old stay set by opening old binding for better straightening of pole and re-sag the existing conductor of H.T/L.T line properly as per direction of supervising engineer.

Straightening of tilted pole structure on 8.5 Mtr. Long PCC Pole at various places by straightening of pole including the cost of labour ,T&P charges required for proper completion of work (inside/outside village)

Providing Bamboo sticks suitable for 4 wire on the lade conductors it include the cost of bamboo sticks, binding wire labourer, T & P carrier etc. required for completion of work.

Guarding of 11 KV line by laying two nos. GI wire parallel and fixing of lacings (tilli) at a distance at 2-3 mtrs. as per direction of supervising engineer/RESPO manual. It includes the cost o f labour T&P carriage etc required for proper completion.

Fixing of Distribution Box on erected PCC Pole.

Re-sagging of loose H.T/L.T line as per direction of supervising engineer. It includes the cost of labour, T&P etc required for proper completion of work.(work will be done inside and outside of village)

Removal/Dismantling of consumer’s cable service connection from existing line feeding consumer supply.

Re-installation of consumer’s cable service connection from existing line feeding consumer supply.

Dismantle of old/damaged ACSR weasel conductor/G.I. Wire from the existing line and its bundling and stacking in roll and send to J.E. Store/ Mathura Store.

Straightening of tilted Single pole at various places by straightening of pole including the cost of labour ,T&P charges required for proper completion of work (inside/outside village)

Removal/Carriage of 25/63 KVA Transformer from site to J.E. Store Centre, Mathura with loading & unloading at both ends

Removal/Carriage of 100 KVA Transformer from site to J.E. Store Centre, Mathura with loading & unloading at both ends