Bharat Petroleum Corporation Limited Tender

Wish Manager Module , Prov and placing panel and tile based mgr modular workstation along with visitor panel with main partition thk as 52.4 mm and ht 1200mm incl. powder coated aluminium trims of size MAIN TABLE 1650 W X 750 D ERU 900 W X 450 D 1200 HT .Tiles on main spine Combination of top tiles are fabric or split fabric tackable or split white.The product is GREENGUARD BIFMA Level 2 Indoor Advantage Griha and GREENPRO certified. Board tile. Bottom tiles Plain metal. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in DL plus DL finish.Wire Mgmt Wires shall be taken into the system thru cable ducts from the junction boxe and it is carried upto the panels thru concealed conduits inside the blocks. MODESTY PANELS WITH ASSEMBLY LEG 25 MM THK PLB modesty has been given on the front of the main worktop which is attached to the partition on one end with gable end bkts and on the other end with metal powder coated frontier leg. Legs Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface Main table recta out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1650 mm w x 750 mm d and ERU table recta of size 900 mm w x 450 mm d. Worksurface Main table recta out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1650 mm w x 750 mm d and ERU table recta of size 900 mm w x 450 mm d. Pedestals Nova pedestal flat metal front full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3 dr equal to 2 box plus 1file. Total manager cubical required will be of 4nos as per proposed layout enclosed as per scope of work.

Upbeat Recta , Providing and fixing of desk based modular table of size W of 1200 mm x D 600 mm x H 750 mm with screen. The table will be desk based system with a platform understructure made up of a combination of MS. Tubes and plates. Providing metal powder coated Cube leg for standard workstation height of 750mm which helps to provide a stable and sturdy base for the worktops.Table top is made up of 25 mm thick Pre Laminated Board conforming to IS 12823. All the edges of table surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The table top should have the provisions for three numbers of Fabric T mould shared 19 mm thick screens on work suface of ht 450 mm which is mounted on Studs. Understructure comprising of metal powder coated cross connectors between legs and legs. which is made up of metal powder coated finish and the entire assembly is fixed to the worktop for extra support. Metal modesty is made with lazer cut perforated metal sheet which are mounted on legs with the help of the modesty mounting brackets. Modesty terminates at 400 mm from ground level. The product is UL GREENGUARD BIFMA Level 2 By SCS global Indoor Advantage By SCS global services Griha and GREENPRO certified Certificates can be verified on internet for verification. and also Bidder must visit the site and submit the layout along with bid before quoting offer so that similar product can be supplied as installed in the current scenario must be supplied. Product certificate are must to submit along with the bid. Total linear recta workstation required will be of 10 nos as per the proposed reuirement.

Revolving Mid Back Chair , The product comes with an overall SEAT SIZE 47.0 cm. Wx51.5 cm. D BACK SIZE 45.0 cm. Wx65.3 cm. H SEAT or BACK ASSEMBLY The seat is made up of 1.2 plus 0 1cm thk. hot pressed plywood measured as per QA method described in OCP QLTA PL14 18. The Back is made up of injection mould d glass filled nylon and upholstered using Quitted Leatherette fabric. SEAT SIZE Larger Seat Depth 47.0 cm W x 51 5 cm D BACK SIZE 45.0 cm. Wx65.3 cm. H HIGH RESILIENCE HR POLYURETHANE FOAM The HR polyurethane seat foam is moulded with density 45 2 kg m degree and hardness 16 plus 2 kgf as per IS7888 for 25 percent compression ARMRESTS The adjustable armrest is designed with the following features Up Down adjustment 8 steps 8.0plus0.5cm range Ht adjustable armrest structure which is Chrome plated and fitted with an armrest top. Fixed Armrest Top is PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY The Lumbar support consists of polypropylene pad with moulded polyurethane foam and covered with polyester fabric. The Ht of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumbar pad has an adjustment of 8.0 plus 0.5 cm in height FRONT PIVOT SYNCHRO MECHANISM The adjustable tilting mechanism is designed with the following features. 360 degree revolving type. Single point control. Front pivot for tilt with feet resting on ground ensuring more comfort. Tilt tension adjustment 4 position locking with anti shocK feature. Seat or back tilting ratio of 1.2 Pneumatic Ht Adjustment The pneumatic ht adjustment has adjustment stroke of 10.0 plus 0.3 PEDESTAL ASSEMBLY The pedestal is fabricated from 0.2 plus 0.02 cm thk HR sheet chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal is 66.0 plus 0 Scm. Pitch center dia. 76.0 plus 1.0 cm with castors. TWIN WHEEL CASTORS The twin wheel castors are injection moulded in black Nylon as per proposed layout enclosed as per scope of work.