Urban Development Department Tender

Cautionary / Mandatory / Facility Information- Providing and fixing of Cautionary (900mm triangle)/ Mandatory(600mm circle) / Facility Info(600mmx800mm) made out of Type XI Retro Reflective Sheeting confirming to IRC:67:2012 and ASTMD 4956-09. Base Sheeting shall be of White Color Type XI Retro Reflective Sheeting & logos done by screen printing in black colour ,borders by screen printing in red colour for Cautionary & Mandatory and blue colour for facility information as per IRC 67-2012 and fixed over 4 mm Aluminium composite material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted with grey colour and fixed over back support frame of 25 mm x 25 mm x 3 mm all round and mounted on a vertical post of 75 mm dia MS Pipe with clear height of not less than 2.1 m from the ground level to the bottom of the board. The sign post should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30 cm height. The sign post shall be firmly fixed in to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including cost and conveyance of all materials, equipment, machinery and labor with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by the Engineer-in-Charge. 10 years pre-qualification warranty as per clause 6.9 of IRC 67-2012 for Type XI retro reflective sheeting from the manufacturer & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 including 3 years outdoor weather exposure report for the retro reflective sheeting offered shall be submitted by the contractor for technical qualification in the tender. Corporation Logo / branding shall be done with Digital Printing Signage with 10 years warranty, refer detailed specification for Digital Printing

Gantry Type Signage

Gantry: • Over Head Gantry structure made of steel work in built up tubular (round, square or rectangular hollow tubes etc. trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. The whole gantry shall be painted with 2 Coat of Epoxy paint of desired color. • Gantry shall be erected on two nos. foundation of size 3500mm x 2000mm x 2580mm with pedestal size of 900mm x 900mm x 1830mm and footing of size 3500mm x 2000mm x 600mm of RCC of 1: 2: 4 and PCC of 1:4:8 in size 3550mm x 2050mm x 150mm with reinforced steel of 1750Kg, 12mm dia and 10mm dia TOR steel with 12 foundation bolts of 1220mm length and 25mm dia for one foundation complete with center shuttering. • Height of Gantry Should be as per the permissible guideline of NHAI & State Highway. Foundation Concrete: Concrete shall be of M20 grade.