Tripura State Electricity Corporation Limited Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Tripura government has posted on its website in a very hassle-free manner. BidAssist is designed in such a manner so as to provide information on all government tenders at one place without any inconvenience.
Costs
EMD
₹ 5,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Shifting Of Existing 33 Kv 11 Kv Lt Line And Service Connection From Panitilla 318.0 Km To Sidongchara 343.0 Km In Connection With Construction And Widening Of Nh8 44 Aa Road Within The Jurisdiction Of Electrical Subdivision Pecharthal
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_POWER_2711_1Bid Award Id
ViewTender No
GM Tech./2018-19/ 19 dated 16-01-2019Tender Authority
Tripura State Electricity Corporation Limited ViewPurchaser Address
-Website
http://https://www.tsecl.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supply of 11 mtr long Steel Tubular Pole conforming to ISS 2713 (P-I & II) 1980 with base plate (Designation 410 - SP - 56)Pole are painted with red oxide primer on top and middle section,conforming to IS:2074/1979 and hot dip galvanized on both surfaces of the bottom section of the pole and base plate conforming to IS-4736-1986,as per Technical specification of Section-V (A)
550
-
-
Erection of 11 mtr. long Steel Tubular pole with base plate,direct in earth including excavation, refilling and ramming etc. as required complete (1/6th of the length of the pole to be embedded in earth) as per direction of the Engineer-in-Charge.
550
-
-
Supply of 9 mtr long Steel Tubular Pole conforming to ISS 2713 (P-I & II) 1980 with base plate , (Designation 410 - SP - 32)Pole are painted with red oxide primer on top and middle section,conforming to IS:2074/1979 and hot dip galvanized on both surfaces of the bottom section of the pole and base plate conforming to IS-4736-1986,as per Technical specification of Section-V (A)
60
-
-
Erection of 9.0 mtr. long Steel Tubular pole with base plate,direct in earth including excavation, refilling and ramming etc. as required complete (1/6th of the length of the pole to be embedded in earth) as per direction of the Engineer-in-Charge.
60
-
-
Supply of Painted stay set complete (for HT & LT line)as per Specification of Section-V of the bid document
632
-
-
Supply of Galvanized stranded stay wire (7/2.5 mm)conforming to IS-209-1966,IS-2141-1968, IS-2629, IS-2633, IS-4826, IS-6745 & IS-12776.
3
-
-
Supply of 33 KV Stay Insulator, conforming to IS:5300/1969.
150
-
-
Supply of 11 KV Stay Insulator conforming to IS:5300/1969.
432
-
-
Supply of LT Stay Insulator conforming to IS:5300/1969.
50
-
-
Supply of Strain screw
32
-
-
Erection of painted stay set complete direct in earth with 16 mm. dia. 1.8 mtr. long painted stay rod, anchor plate of size 300 X 300 X 8 mm. thick, turn buckle of length 356 mm. with 300 mm. long threaded adjustable 16 mm. dia. MS rod , thimble, guy insulator as per IS specification, hot dip (heavy duty) galvanized stay stranded wire of size 7/2.5 mm. fastened with stay clamps as required. ( including supply of MS clamp & Nuts & Bolts as reqd)
632
-
-
Supply of triple pole (3 phase), 12 KV, 200 Amp. Manually gang operated, air brake switch, as per technical specification of Section-V of the bid document with and supply of clamps, nuts and bolts as par relevant IS.
14
-
-
Erection of 11 KV, 200 Amps. 3-phase GO Switch complete i/c fixing horizontally & vertically operating pipe & operating handle with nuts & bolts etc. as required.
14
-
-
Supply of 12 KV,3 phase 200 Amp. drop out fuse unit conforming to IS:-9385(Part-I to III) as amended till to date ,all farous part shall be hot dip galvanized as per IS:- 2633 along with Supply of nuts & bolts and bimetallic lugs as per relevant IS.
14
-
-
Erection of 11 KV DOF Set of three nos i/c necessary connection complete as per Technical Specification
14
-
-
Supply of 9 KV, 5 KN single pole metal oxide gapless surge type LA conforming to IS: 3070 (Part-III)& IS-2071(methods for H.V test)
42
-
-
Erection of 9 KV, 5 KA single pole metal oxide gapless surge type LA suitable for nominal system voltage of 11 KV, 3 phase, 50 Hz, AC supply. Normal Creepage distance 600 mm. conforming to ISS:3070/1993 (Set of 3 (three) nos.)
14
-
-
Supply of ACSR conductor conforming to IS:-398(Part-I & II) of 1996 with latest amendment and as per technical specification attached at Section-V of the bid document a) 6 /4.72 + 7/1.57 mm ACSR (Dog).
71
-
-
b) 6/1/2.59 mm ACSR (Weasel)
93
-
-
Laying, hoisting & stringing including binding, jumpering, etc. as required of ACSR (7/1.57/6/4.72 mm) DOG conductor ,as per direction of the Engineer-in-Charge.
70
-
-
Laying, hoisting & stringing including binding, jumpering, etc. as required of 6/1/2.59 mm ACSR (Weasel) conductor as per direction of the Engineer-in-Charge.
92
-
-
Supply, of 8 SWG G.I. wire as per ISS : 280/1978 amended latest with heavy coating as per ISS : 4826 / 1968 of tensile strength 55 to 95 Kgf /mm. and as per technical specification attached at Section-V of the bid document.
6.2
-
-
Laying, hoisting & stringing of 8 SWG G.I. wire as per ISS : 280/1978 amended latest with heavy coating as per ISS : 4826 I 1968 of tensile strength 55 to 95 Kgf/mm i/c fastening with cross arm & metallic parts for earth continuity wire and metal parts to earth electrode as per direction of the Engineer-in-Charge.
60
-
-
Supply of fabricated Sub-station Cross arm , 2.8 mtr. long made of 100 X 50 X 50 X 6 mm. MS channel painted with Steel primer of approved quality along with drilling of holes as required with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
21
-
-
Erection of Sub-station Cross arm , 2.8 mtr. long made of 100 X 50 X 50 X 6 mm. MS channel with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts & washers complete.
21
-
-
Supply of fabricated Transformer support Cross arm , 0.6 mtr. long made of 100 X 50 X 50 X 6 mm. MS channel painted with Steel primer of approved quality along with drilling of holes as required with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
14
-
-
Erection of Transformer support Cross arm , 0.6 mtr. long made of 100 X 50 X 50 X 6 mm. MS channel with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
14
-
-
Supply of fabricated MS channel bracket for G.O.S & D.O. fuse unit on double steel tubular pole or PCC pole or RS joist structure , 2.8 mtr. long made of 75 X 40 X 40 X 6 mm. MS channel painted with Steel primer of approved quality along with drilling of holes as required with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
28
-
-
Erection of fabricated MS channel bracket for G.O.S & D.O. fuse unit on double steel tubular pole or PCC pole or RS joist structure, 2.8 mtr. long made of 75 X 40 X 40 X 6 mm. MS channel with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts & washers complete.
28
-
-
Supply of fabricated Sub-station Cross arm , 2.2mtr. long made of 100 X 50 X 50 X 6 mm. MS channel painted with Steel primer of approved quality along with drilling of holes as required for 33 KV line on double Steel Tubular pole or PCC pole or R.S Joist with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
66
-
-
Erection of fabricated Sub-station Cross arm , 2.2mtr. long made of 100 X 50 X 50 X 6 mm. MS channel for 33 KV line with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
66
-
-
Supply of fabricated Sub-station Cross arm , 2.2mtr. long made of 75 X 40 X 40 X 6 mm. MS channel painted with Steel primer of approved quality along with drilling of holes as required for 11 KV line on double Steel Tubular pole or PCC pole or R.S Joist with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
166
-
-
Erection of fabricated Sub-station Cross arm , 2.2mtr. long made of 75 X 40 X 40 X 6 mm. MS channel for 11 KV line with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
166
-
-
Supply of fabricated Pole Top Cross arm , 0.3 mtr. long made of 100 X 50 X 50 X 6 mm. MS channel painted with Steel primer of approved quality along with drilling of holes as required for 33 KV line on single Steel Tubular pole or PCC pole or R.S Joist with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
132
-
-
Erection of fabricated Pole Top Cross arm , 0.3 mtr. long made of 100 X 50 X 50 X 6 mm. MS channel for 33 KV line on single Steel Tubular pole or PCC pole or R.S Joist with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
132
-
-
Supply of fabricated bottom Cross arm , 1.2 mtr. long made of 100 X 50 X 50 X 6 mm. MS channel painted with Steel primer of approved quality along with drilling of holes as required for 33 KV line on single Steel Tubular pole or PCC pole or R.S Joist with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
132
-
-
Erection of fabricated bottom Cross arm , 1.2 mtr. long made of 100 X 50 X 50 X 6 mm. MS channel for 33 KV line on single Steel Tubular pole or PCC pole or R.S Joist with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
132
-
-
Supply of fabricated MS Angle bracket for Gang operating bkt. of Sub-Station on double steel tubular pole or PCC pole or RS joist structure , 2.8 mtr. long made of 65x65x6 mm. MS Angle painted with Steel primer of approved quality along with drilling of holes as required with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
7
-
-
Erectionof fabricated MS Angle bracket for Gang operating bkt. of Sub-Station on double steel tubular pole or PCC pole or RS joist structure , 2.8 mtr. long made of 65x65x6 mm. MS Angle with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
7
-
-
Supply of fabricated Cross arm , 3.0 mtr. long made of 75 X 40 X 40 X 6 mm. MS channel painted with Steel primer of approved quality along with drilling of holes as required for 33 KV line on double Steel Tubular pole or PCC pole or R.S Joist with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
7
-
-
Erection of fabricated Cross arm , 3.0 mtr. long made of 75 X 40 X 40 X 6 mm. MS channel for 33 KV line on double Steel Tubular pole or PCC pole or R.S Joist with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
7
-
-
Supply of fabricated 1.2 mtr. long bottom cross arm by 75 X 40 X 40 X 6 mm. MS channel for 11 KV line on single steel tubular pole or PCC pole or RS joist painted with Steel primer of approved quality along with drilling of holes as required with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
129
-
-
Erection of fabricated 1.2 mtr. long bottom cross arm by 75 X 40 X 40 X 6 mm. MS channel for 11 KV line on single steel tubular pole or PCC pole or RS joist with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
129
-
-
Supply of fabricated 0.3 mtr. long top cross arm by 75 X 40 X 40 X 6 mm. MS channel for 11 KV line on single steel tubular pole or PCC pole or RS joist painted with Steel primer of approved quality along with drilling of holes as required with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
129
-
-
Erection of fabricated 0.3 mtr. long top cross arm by 75 X 40 X 40 X 6 mm. MS channel for 11 KV line on single steel tubular pole or PCC pole or RS joist , with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
129
-
-
Supply of fabricated ,2.5 mtr. long guard bracket by 65x65x6mm MS Angle for 33 KV line on double steel tubular pole or PCC pole or RS joist structure painted with Steel primer of approved quality along with drilling of holes as required with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
166
-
-
Erection of fabricated ,2.5 mtr. long guard bracket by 65x65x6mm MS Angle for 33 KV line on double steel tubular pole or PCC pole or RS joist structure , with 2( two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
166
-
-
Supply of fabricated ,1.7 mtr. long guard bracket by 65x65x6mm MS Angle for 11 KV line on single steel tubular pole or PCC pole or RS joist structure, painted with Steel primer of approved quality along with drilling of holes as required with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
129
-
-
Erection of fabricated ,1.7 mtr. long guard bracket by 65x65x6mm MS Angle for 11 KV line on single steel tubular pole or PCC pole or RS joist structure with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
129
-
-
Supply of fabricated diagonal cross bracing (1.7m long M.S. angle of size 65x65x6mm) on steel tubular pole or PCC pole or RS joist, for 11 KV/ 33 KV line, painted with Steel primer of approved quality along with drilling of holes as required with , ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
450
-
-
Erection of fabricated diagonal cross bracing (1.7m long M.S. angle of size 65x65x6mm) on steel tubular pole or PCC pole or RS joist, for 11 KV/ 33 KV line, along with drilling of holes as required with , ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
450
-
-
Supply of fabricated Horizontal cross bracing (1.3m long M.S. angle of size 65x65x6mm) on steel tubular pole or PCC pole or RS joist , for 11 KV/ 33 KV line, painted with Steel primer of approved quality along with drilling of holes as required with 2(two) nos clamp of 50x6 mm MS flat, , ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
450
-
-
Erection of fabricated Horizontal cross bracing (1.3m long M.S. angle of size 65x65x6mm) on steel tubular pole or PCC pole or RS joist, for 11 KV/ 33 KV line, along with drilling of holes as required with 2(two) nos clamp of 50x6 mm MS flat, , ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
450
-
-
Supply of fabricated LT 2 wire bracket ,0.55 mtr. long made off 50 X 50 X 6 mm. MS angle on steel tubular pole or PCC pole or RS joist, painted with Steel primer of approved quality along with drilling of holes as required with 1(one ) nos clamp of 50x6 mm MS flat, , ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
250
-
-
Erection of fabricated LT 2 wire bracket ,0.55 mtr. long made off 50 X 50 X 6 mm. MS angle on steel tubular pole or PCC pole or RS joist, along with drilling of holes as required with 1(one ) nos clamp of 50x6 mm MS flat, , ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
250
-
-
Supply of fabricated LT 4 wire 'C' bracket , 1.1 mtr. long made off 50 X 50 X 6 mm. MS angle on steel tubular pole or PCC pole or RS joist, painted with Steel primer of approved quality along with drilling of holes as required with 2(two ) nos clamp of 50x6 mm MS flat, , ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
115
-
-
Erection of fabricated LT 4 wire 'C' bracket , 1.1 mtr. long made off 50 X 50 X 6 mm. MS angle on steel tubular pole or PCC pole or RS joist, with 2(two ) nos clamp of 50x6 mm MS flat, , ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
115
-
-
Supply of Composite Polymeric Disc Insulator, ball and socket type for 11 KV and 33 KV system (EMS-70 KN) as per technical specification of Section-V of the bid document.
2226
-
-
Supply of , ball and socket type tension fittings of EMS-70 KN for 11 KV and 33 KV system (EMS-70 KN) complete, as per technical specification of Section-V of the bid document,
1170
-
-
Erection of Composite Polymeric Disc Insulator, ball and socket type for 11 KV and 33 KV system (EMS-70 KN) including tension fittings of EMS-70, to accommodate the relevant ACSR conductor size along with nuts and bolts, washer etc. as required in complete as per direction of the Engineer-in-Charge.
1170
-
-
Supply of Polymeric Pin insulator set complete for 11 KV system as per Technical specification of Section-V of the bid document.
1200
-
-
Erection of Polymeric Pin insulator set complete for 11 KV system as per direction of the Engineer-in-Charge.
1200
-
-
Supply of Polymeric Pin insulator set complete for 33 KV system as per Technical specification of Section-V of the bid document.
384
-
-
Erection of Polymeric Pin insulator set complete for 33 KV systemh necessary binding ctc. complete.
384
-
-
Supply of Porcelin Shackle insulator of size 3"x3.1/2" for LT line conforming to IS: 1445/ 1977 with up to date amendment. including supply of nuts, straps & bolt etc. as required.
1200
-
-
Erection of Porcelain Shackle Insulator (4x4.5" ) for LT system with mechanical strength of 5 KN conforming to ISS:731/1971 with hot dip galvanized M.S G.I Straps with bolts in complete (suitable for Rabbit/DOG conductor) as per direction of the Engineer-in-Charge
1200
-
-
Supply and erection of earthing set as per ISS : 3043 of 1966 and with latest amendment if any, 2.5 mtr long G.I. pipe (ISI marked) of 40 mm diameter with suitable holes on pipe circumference including a pair of clamps (made of 50 X 6 mm M.S. flat), galvanized nuts & bolts alongwith alternate layers of salt & charcoal including supply of 4.0 mtr long, 12mm dia PVC pipe for each earthing set etc. as required and as per direction of the Engineer-in-Charge.
132
-
-
Supply 11/0.433 KV, BIS certified, Energy efficiency level-II, Distribution transformer of following ratings, conforming to IS:-1180(Part-I) 2014,with bimetallic terminal connector and as per technical specification pf Section-V of the bid document. 25 KVA, 3-phase, 11/0.443 KV Distribution Transformer
3
-
-
Supply 11/0.433 KV, BIS certified, Energy efficiency level-II, Distribution transformer of following ratings, conforming to IS:-1180(Part-I) 2014,with bimetallic terminal connector and as per technical specification pf Section-V of the bid document. 63 KVA, 3-phase 11/0.443 KV Distribution Transformer
1
-
-
100 KVA, 3-phase, 11/0.443 KV Distribution Transformer
4
-
-
Erection & Commissioning of 25 KVA, 3-phase, 11/0.443 KV Distribution Transformer on pole structure at a height of 2440 mm (approx) above GL in double MS Channel support (100X50X50X6 mm Channel) with all necessary accessories and fittings as per Technical Specification.
3
-
-
Erection & Commissioning of 63 KVA, 3-phase, 11/0.443 KV Distribution Transformer on pole structure at a height of 2440 mm (approx) above GL in double MS channel support (100X50X50X6 mm Channel) with all necessary accessories and fittings as per Technical Specification.
1
-
-
Erection & Commissioning of 100 KVA, 3-phase 11/0.443 KV Distribution Transformer on pole structure at a height of 2440 mm (approx) above GL in double MS channel support (100X50X50X6 mm channel) with all necessary accessories and fittings as per Technical Specification.
4
-
-
Supply of single circuit rewireable porcelain Kit-kat fuse unit of 500V grade as per IS:- 2086/1993:- 200 Amps Cut-Out
21
-
-
Supply of single circuit rewireable porcelain Kit-kat fuse unit of 500V grade as per IS:- 2086/1993:- 100 Amps Cut-Out
30
-
-
Supply of 1100 Volt LT unarmoured single core , extruded PVC compound type ST-2, conforming to IS:- 5831/1984, testing specification- ISS: 1554 (P - I) / 1988 & IS:- 10810(method of test of cable) and supply of bimetallic lugs conforming to IS:- 8309: 1993, as required to meet the site condition 120 sqmm. PVC Cable
1.2
-
-
Supply of 1100 Volt LT unarmoured single core , extruded PVC compound type ST-2, conforming to IS:- 5831/1984, testing specification- ISS: 1554 (P - I) / 1988 & IS:- 10810(method of test of cable) and supply of bimetallic lugs conforming to IS:- 8309: 1993, as required to meet the site condition:- 70 sqmm PVC Cable
0.6
-
-
120 sqmm. Bi-metallic Lugs conforming to IS:- 8309: 1993
120
-
-
Supply of Straps with Nuts & Bolts as per technical specification detailed at Section_v of the bid document.
960
-
-
Fabricated D-Clamp made of 50X 6 mm MS flat.
200
-
-
Suppy of PVC insulated & PVC sheathed stranded Aluminium conductor with inner & outer sheath of extruded PVC compound type ST-2 conforming to IS:- 5831-1994 and conforming to testing standard of 1554(part-I) and IS:- 10810, for providing Single phase/ Three phase Service connection:- 4 sq mm PVC Cable
10
-
-
Suppy of PVC insulated & PVC sheathed stranded Aluminium conductor with inner & outer sheath of extruded PVC compound type ST-2 conforming to IS:- 5831-1994 and conforming to testing standard of 1554(part-I) and IS:- 10810, for providing Single phase/ Three phase Service connection:- 10 sq mm PVC Cable
2
-
-
Making connection from Transformer LT side to overhead LT Line via fuse unit of unarmored PVC cable 1100-V grade conforming to ISS: 1554 (P-I) /1988 of the following sizes and the cables shall be properly crimped by bi-metallic lugs at contact areas as per direction of the Engineer-in-Charge.
20
-
-
Supply and Erection of Protective Guarding by 8 SWG GI Wire as per technical specification along with 33 KV/ 11 KV Line across road/river/telecom line etc. in horizontal formation complete
1200
-
-
Supply and Erection of Protective Guarding by 8 SWG GI Wire as per technical specification along with LT Line across road/river/telecom line etc. in horizontal formation complete
500
-
-
Supply of Danger Plate (HT) as per technical specification detailed in section-V of the bid document.
400
-
-
Supply of Danger Plate (LT) as per technical specification detailed in section-V of the bid document.
140
-
-
Erection of Danger Plate on HT/LT Poles
540
-
-
Supply of barbed wires as per relevant IS, for use as anti-climbing devices on pole structures in helical form 7.5 cm. apart starting from ground level (1.5 Kg. / pole) as per direction of Engineer-in-charge.
1.3
-
-
Erection of Anti-climbing devices viz barbed wire on existing pole structures including supply of barbed wire confirming to IS:278 having four points barbed spaced 75 (+/- 12) mm apart shall be wrapped helically with a pitch of 75 mm around the limb of support and firmly commencing from the height of 3.5 M and up to 5 or 6 M (1.5 Kg. / pole) as per direction of the Engineer-in-Charge.
751
-
-
Supply and erection of Polythin pipe, 1/2" dia for drawing of GI wire for earthing connection.
170
-
-
Grouting with CC of ratio 1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm. nominal size) ilc supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required (@ 0.119 Cum per Steel Tubular Pole & @ 0.119 Cum per Stay Set, inclusive the cost of centering , Shuttering , propping and removal of forms etc .
163
-
-
Applying priming coat with ready mixed primer of approved quality on top and middle section of Steel Tubular Poles along with brackets i/c. painting (two or more coats) with Aluminium paint of approved quality to give an even shade as per Technical Specification.
739
-
-
Supply & erection of wooden plank (preferably karai wood) of size 24" x 10" x 1.5" for fitting, fixing of LT cut outs along with MS clamps, nuts & bolts and cable connections with termination by Lugs as per Specification.
40
-
-
Supply & erection of fabricated copper strip size of 50x8 mm, 20 cm long with 4 nos hole to connect the cable/DT LT Stud as required as per direction of the Engineering-in-Charge.
18
-
-
Providing Sub-Station protective fencing of 2.5 Mtr X 3.0 Mtr area,with Galvanized Steel (G.I.) chain link fence fabric conforming to IS:2721:2003, as per technical specification detailed in section-V of the bid document.
7
-
-
Hiring of Maruti van for supervision of proposed & dismantled HT/LT line
100
-
-
Supply of ISI marked, 19/33 KV, Earthed, Single core, 1 X 400 Sq.mm. XLPE insulated, screened, Power Cable as per IS 7098/II/1985 and latest amendments, with stranded Aluminium Conductor of H2/H4 grade as per IS: 8130-1984 with latest amendment and as per technical specification attached at Section-V of the bid document.
500
-
-
Manual Boring , Laying & commissioning of HT,50-400sqmm) XLPE insulated Power cable below the road surface through HDPE/GI pipe by AII Terrain Horizontal Directional Drilling / Digging across the road crossing without affecting the existing Road Surface at a depth of minimum 1100 mm. including excavation cable entry pits or as per site requirement of TSECL depending on approved route survey. The Cable entry pits should be filled by spreading of Sand.
300
-
-
Fitting , fixing of all sizes dia HDPE/GI pipe ( Horizontally or vertically) on Wall or Poles for riser to pole/Feeder pillar/Service etc. including supply of necessary wall mounting Clamp/Poles clamp with proper clamping as per Engineering requirement.
64
-
-
Laying and Commissioning of double run (2No Cable in same trench) TR XLPE/ XLPE insulated armoured power cable (35sqmm to 300sqmm) direct into earth including excavation of earth upto a depth of 1200mm (Width of the trench 60 cm.) including 1st class brick protection of two layer flat brick soling & divider/protection by bricks between 2cables, 300 mm. sand (River sand) cushioning and refilling and ramming the excavated soil as per direction of Engineer in charge.
120
-
-
Providing of T-shaped Pillar for cable line ID MARKING engraved with caption "POWER CABLE.LINE" (made of pre-cast RCC) of size(Pillar-3 ft. X 0.33 ft. X 0.33 ft.) and (T-section-3 ft.X0.33 ft.) by excavating earth including required painting of the of the engraved caption in black over yellow background as per technical requirement, direction of the Engineer-in-Charge. The Pillar shall be embedded in earth by 1.5 ft.
6
-
-
Supply , jointing and commissioning of Heat Shrink, Out Door Type End Termination Kits with lugs of 3M (M Seal) / Raychem make for 19/33 KV(E) XLPE insulated, screened Aluminium Conductor Single core , 1X400 Sq.mm, Power Cable.
8
-
-
Supply of 100 mm dia best quality heavy duty GI PIPE as per ISS 1239 of different length as per requirement of engineering.
400
-
-
Schedule-B (Civil works)
-
-
-
Earth work in excavation by manual means in foundation trenches or drains (nor exceeding 1.5 m in width or 10 sqmm on plan ) i/c dressing of sides and ramming of bottom, lift upto 1.5m i/c getting out the excavation soil and disposal of surplus excavated soil as directed within a lead of 50 m. for All kinds of soil , Boundary = 2x4x4.00x0.508x0.9 = 14.6 cum, Txr. Base = 2x2.1X2.1x0.45 = 3.96cum.
18.6
-
-
Supplying and Filling in plinth , under floor, foundation etc with sand from local querry with all lifts i/c spreading in horizontal layers, watering, grading to required slope,ramming, consulidating and compacting each layer , complete 2x4x4.00x0.508x0.075=1.22cum, 2x2.10x2.10x0.075= 0.66 cum. 2x 1.75x1.75x 1.1=6.75cum.
8.63
-
-
Providing and laying in foundation and plinth cement concrete 1:5:10 (1 cement:5river sand:10 jhama brick aggregate 40mm nominal size) excluding the cost of centering and shuttering 2x4x4.00x0.508x0.075 = 1.22 cum, Txr. Base= 2x2.10x 2.10 x0.075=0.66 cum, step = 2x0.90x0.90x0.075= 0.122 cum , total = 2.002 cum.
2
-
-
Reinforced cement work in wall 1:2:4 (1 cement:2 river sand: 4 Jhama brick aggregate 20mm nominal size) excluding the cost of centering, shuttering and reinforcement including Lintels, Beams, plinth beam, griders, upto floor five level,(i) 2x4x4.00x0.25x0.15 = 1.2 cum.(ii) 2x 2x2x 0.10= 0.8 cum
2
-
-
Mild steel & Medium / Tensile steel reinforcement for RCC work i/c straightening,cutting, bending, placing in position and binding all complete upto floor five level (i)10 mm dia cold twisted steel bar: 2x2x 14x 2x 0.6167 =35 kg (ii) 2x4x4x4x0.6167= 79 kg. lap & westage=10 % . Total 125 kg, (iii) 6mm dia plain bar, 2x4x40x0.65x0.22kg= 46 kg, Add wastage 10% , Total 51 Kg(Rounded).
176
-
-
Centering & shuttering i/c struting, proping etc. and removing of the same for (b) Lintels, beam, girders, bresummers and cantilever with shuttering Ply.(i) 2x4x2x4.00x0.15=9.6 sqm. (ii) 2x4x2.1x. 0.15= 2.5 sqm. Total= 24.3 Sq m
12
-
-
First class brick work in foundation and plinth in cement morter 1:5 (1 Cement: 5 River sand). Boundary=2x4x4x 0.60 x 0.254 = 4.87 cum, Txr. Base = 2x2.00x2.00x1.2x 0.254 =2.45 cum, Step=2x0.90x0.25x0.30=0.14cum and in side= 2x0.90x0.25x0.45=0.203cum, 2x0.90x0.254x0.60=0.27cum, 2x0.9x0.254x0.75=0.24cum, Total=19.49cum
8.3
-
-
12mm cement mortar plaster of mix 1:5 (1 Cement: 5 river sand, boundary=2x4x4x1.45= 46.4 sqm and Txr. Base=2x4x2.00x1.05=16.8sqm, 2x2.00x2.00=8 sqm, Steps 2x 0.9x 1.4= 2.5 sqm, steps side 2x2x 0.3= 1.2 sqm, Total=150 sqm.
75
-
-
Providing structural Steel work revited, bolted or welded in built up sections trusses & framed work, i/c cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required (a) in tees, angles and channels. Size of angle 65x65x6mm (W/m=5.8Kg), 2x12x2.0x 5.8 = 280kg, Size of angle 50x50x6mm (W/m=4.54Kg) 2x2x 14.5 x 4.54 = 264 Kg, 2x 2x 5.5x 4.54= 100 Kg, Total= 645 kg.(rounded)
645
-
-
Providing & fixing of hard drawn steel wire fabrick 75x25 mesh of weight not less than 7.75kg per sqm to frames ,bolted or welded i/c cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required etc. 2x 14.5x1.25=36.25 sqm, , 2x2x1.25x 0.75 = 3.75 sqm, Total = 40 sqm.
40
-
-
Cutting, clearing & disposal of jungle/tree of any girth from 3(three) meter either side of HT/LT line of providing required vertical and horizontal clearance as per provision of I.E. Rule.
18
-
-
Numbering of Pole/DT with black Japper paint after applying priming coats by red oxide primer followed by a painting 2 or more coats with synthetic enamel paint (Yellow Colour) of approved quality within a area of 8"X14" on pole /DT as reqd. as per direction of the Engineer-in-Charge. 3-phase 11/0.433 KV Distribution Transformers
17
-
-
LT/HT Composit pole
250
-
-
Schedule - C Uprooting / Dismantling and Re Erection with carrying of the items upto work side/ site storeyard of TSECL.
-
-
-
Uprooting of 9 mtr. Long PCC Pole.
201
-
-
Re erection of 9 mtr. Long PCC Pole.
78
-
-
Uprooting of 8 Mtr. Long PCC pole.
50
-
-
Re erection of 8 Mtr. Long PCC pole.
48
-
-
Up rooting of Stud by 9 mtr. Long PCC Pole
2
-
-
Up rooting of 9 mtr. Long S.T Pole.
34
-
-
Re erection of 9 mtr. Long S.T Pole.
25
-
-
Up rooting of 11 mtr. Long S.T Pole.
107
-
-
Up rooting of 8 mtr. Long S.T Pole.
28
-
-
Up rooting of Mini tower structure.
10
-
-
Up rooting of Rail Pole 90 lb
10
-
-
Dismantaling & Up rooting of Stay set complete.
372
-
-
Re erection of Stay set complete.
27
-
-
Dismantaling of SP top bracket including clamp nuts & bolts., for 11 KV / 33 KV line
93
-
-
Re erection of SP top bracket (0.3 m long of channel size 75x40x40x6mm) for 11 KV / 33 KV line.
24
-
-
Dismantaling of SP bottom bracket including clamp nuts & bolts for 11 KV / 33 KV line.
93
-
-
Re erection of SP bottom bracket (1.3 m long of channel size 75x40x40x6mm) for 11 KV line.
24
-
-
Dismantling of SP guard bracket including clamp nuts & bolts.forfor 11 KV / 33 KV line.
66
-
-
Re erection of SP guard bracket including clamp nuts & bolts.for for 11 KV / 33 KV line.
24
-
-
Dismantling of DP top / bottom bracket including clamp nuts & bolts, for 11 KV / 33 KV line.
64
-
-
Re erection of DP top / bottom bracket including clamp nuts & bolts, for 11 KV / 33 KV line.
9
-
-
Dismantling of DP guard bracket including clamp nuts & bolts,for 11 KV / 33 KV line.
30
-
-
Re erection of DP guard bracket including clamp nuts & bolts,for 11 KV / 33 KV line.
24
-
-
Dismantling of 1.7 m long Channel of size 75x40x40x6mm of 11 KV double feeder line bracket.including clamp nuts & bolts.
142
-
-
Re erection of of 1.7 m long Channel of size 75x40x40x6mm of 11 KV double feeder line bracket.including clamp nuts & bolts.
74
-
-
Dismantling of 2.2 m long Angle of size 65x65x6mm of 11 KV double feeder line bracket.including clamp nuts & bolts.
35
-
-
Re erection of 2.2 m long Angle of size 65x65x6mm of 11 KV double feeder line bracket.including clamp nuts & bolts.
14
-
-
Dismantling of Sub-station bracket (2.8 m long of Channel of size 100x50x50x6mm).including clamp nuts & bolts.
21
-
-
Re erection of Sub-station bracket (2.8 m long of Channel of size 100x50x50x6mm).including clamp nuts & bolts.
18
-
-
Dismantling of Sub-station bracket (2.8 m long of Channel of size 75x40x40x6mm).including clamp nuts & bolts.
21
-
-
Re erecton of Sub-station bracket (2.8 m long of Channel of size 75x40x40x6mm).including clamp nuts & bolts.
9
-
-
Dismantling of Sub-station bracket (2.8 m long of Angle of size 65x65x6mm).including clamp nuts & bolts.
14
-
-
Re erection of Sub-station bracket (2.8 m long of Angle of size 65x65x6mm).including clamp nuts & bolts.
9
-
-
Dismantling of Sub-station bracket (0.6 m long of Angle of size 100x50x50x6mm).including clamp nuts & bolts.
14
-
-
Re erection of Sub-station bracket (0.6 m long of Angle of size 100x50x50x6mm).including clamp nuts & bolts.
14
-
-
Dismantling of Horizontal/ diagonal cross bracing (angle of size 65x65x6mm)including clamp nuts & bolts.
80
-
-
Re erection of Horizontal/ diagonal cross bracing (angle of size 65x65x6mm)including clamp nuts & bolts.
80
-
-
Dismantling of DP bracket (2.2m long of channel size 75x40x40x6mm/ Angle size 65x65x6mm) for 11 KV GOS/DOF.including clamp nuts & bolts.
10
-
-
Re erection of DP bracket (2.2m long of channel size 75x40x40x6mm / Angle size 65x65x6mm) for 11 KV GOS/DOF.including clamp nuts & bolts.
10
-
-
Dismantling of LT 4 wire bracket (1.1m long of Angle of size 50x50x6mm).including clamp nuts & bolts.
10
-
-
Re erection of LT 4 wire bracket (1.1m long of Angle of size 50x50x6mm).including clamp nuts & bolts.
10
-
-
Re erection of LT 2 wire bracket (0.55m long of Angle of size 50x50x6mm).including clamp nuts & bolts.
210
-
-
Dismantling of LT 2 wire bracket (0.55m long of Angle of size 50x50x6mm).including clamp nuts & bolts.
210
-
-
Dismantling of Height extension bracket (2.5m long of Channel 75x40x40x6 mm).including clamp nuts & bolts.
20
-
-
Dismantling of 315 KVA Transformer with PVC cable connection & Cut out circuits
1
-
-
Re erection & commissionng of 315 KVA Transformer with all necessory accessories and fittings.
1
-
-
Dismantling of 100 KVA Transformerwith PVC cable connection & Cut out circuits
3
-
-
Re erection & commissionng of 100 KVA Transformer with all necessory accessories and fittings.
3
-
-
Dismantling of 63 KVA Transformer
1
-
-
Re erection & commissionng of 63 KVA Transformer with all necessory accessories and fittings.
1
-
-
Dismantling of 25 KVA Transformer with PVC cable connection & Cut out circuits
3
-
-
Re erection & commissionng of 25 KVA Transformer with all necessory accessories and fittings.
3
-
-
Dismantling of triple pole 11 KV GOS with necessary connections.
18
-
-
Re erection of triple pole 11 KV GOS with necessary connections.
3
-
-
Dismantling of triple pole 11 KV DO fuse unit with necessary connections.
18
-
-
Re erection of triple pole 11 KV DO fuse unit with necessary connections.
3
-
-
Dismantling of triple pole 11 KV LA set with necessary connections.
15
-
-
Re erection of triple pole 11 KV DO fuse unit with necessary connections.
15
-
-
Dismantling of Shackle insulator of 3"x3.1/2" size with straps & bolts.
887
-
-
Re erection of Shackle insulator of 3"x3.1/2" size with straps & bolts.
324
-
-
Dismantling 11 KV Porcelin Disc insulator (45 KN) with fittings..
1932
-
-
Re erection of 11 KV Porcelin Disc insulator (45 KN) with fittings..
54
-
-
Dismantling of 11 KVPorcelin Pin insulator (45 KN) with GI pin.
471
-
-
Re erection of of 11 KVPorcelin Pin insulator (45 KN) with GI pin.
66
-
-
Dismantling of 33 KVPorcelin Pin insulator with GI Pin..
475
-
-
Re erection of 33 KVPorcelin Pin insulator with GI Pin..
54
-
-
Dismanltling and coiling of ACSR Dog (7/1.57/64.72 mm/AAAC.
70
-
-
Dismanltling and coiling of ACSR (6/1/2.59 mm.
45
-
-
Dismanltling and coiling of GI guard wire (8SWG).
50
-
-
Dismanltling of Cradle guard (HT/LT).
950
-
-
Re erection of Cradle guard (HT/LT).
150
-
-
Dismantling and re erection of Service connection (single phase).
547
-
-
Dismantling and re erection of Service connection (three phase).
15
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements