Tripura State Electricity Corporation Limited Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Tripura government has posted on its website in a very hassle-free manner. BidAssist is designed in such a manner so as to provide information on all government tenders at one place without any inconvenience.
Tripura State Electricity Corporation Limited - TSECL Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date6 Sep 2022
Closing Date21 Oct 2022
Tender Amount₹ 35,83,76,497
Costs
EMD
₹ 71,67,530Document Cost
₹ 25,000Tender Fee
Refer Documents
Summary
Work Of Distribution Infra At West Tripura District Under Rdss Scheme
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_POWER_31874_1Bid Award Id
ViewTender No
AGM(DPandC)/TSECL/ RDSS/INFRA/LR/22-23/001Tender Authority
Tripura State Electricity Corporation Limited ViewPurchaser Address
-Website
http://https://www.tsecl.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
8 M long Steel Tubular poles with welded steel base plate of Designation 540 SP 15 (IS 2713, Pt I, II, III 1980) galvanized.
3829
-
-
PCC Pole (8 mtr/140Kg )
3
-
-
LT AB Cable 3x50 +1x16+1x35 sq.mm (As per IS 7098 (Part-II) 1985 ,IS 8130 1984, IS 5831 1984, IS 3975 1988 , IS 398 Part-IV 1979)
601.7
-
-
Galvanised Stay Set with anchor plate (200x200x6mm), 50x8mm stay
clamp, nut bolts, 2 Nos. turn buckles, 1.8 m long, 16 mm diameter solid GS Stay rod etc. as required as per technical specification, approved drawings and scope of work.
2188
-
-
Guy Insulator
2188
-
-
Stay Wire (7/4 mm, 8 SWG) (4 Nos)
10940
-
-
Suspension clamp Assembly with straps & buckles (50 Sq. mm)
3282
-
-
Dead End Clamp assembly with straps & Buckles ( 35-50)Sq. mm
2188
-
-
Anchor Clamp
4376
-
-
IPC Main 16-95 and Tap 4-50 sq mm
54700
-
-
Pole Clamp
13675
-
-
Eye Hook
13675
-
-
Distribution Box 3 Phase 25-50 Sq. mm (Type A- Single Phase/Type B- Three Phase)
7658
-
-
Stay Clamp of Ms Flat (50x6mm)
9846
-
-
Nuts & Bolts with washers (assorted)
3938.4
-
-
Engineering, drawing & supply of 3-ph 35 Sq. mm AB Cable (8 mtr GI Pole) in replacement work Along with accessories As per IS standard , Approved Technical Specification & drawings.
-
-
-
8 M long Steel Tubular poles with welded steel base plate of Designation 540 SP 15 (IS 2713, Pt I, II, III 1980) galvanized.
1225
-
-
PCC Pole (8 mtr/140Kg)
2
-
-
LT AB Cable 3x35 +1x16+1x25 Sq. Mm (As per IS 7098 (Part-II) 1985 ,IS 8130 1984, IS 5831 1984, IS 3975 1988 , IS 398 Part-IV 1979)
192.5
-
-
Galvanised Stay Set with anchor plate (200x200x6mm), 50x8mm stay
clamp, nut bolts, 2 Nos turn buckles, 1.8 m long, 16 mm diameter solid GS Stay rod etc. as required as per technical specification, approved drawings and scope of work.
700
-
-
Guy Insulator
700
-
-
Stay Wire (7/4 mm/8 SWG) (4 Nos)
4200
-
-
Suspension clamp Assembly with straps & buckle (50 Sq. mm)
1050
-
-
Dead End Clamp assembly with straps & Buckles ( 35-50) Sq. mm
700
-
-
Anchor Clamp
1400
-
-
IPC Main 16-95 and Tap 4-35 sq mm
17500
-
-
Pole Clamp
4375
-
-
Eye Hook
4375
-
-
Distribution Box 3 Phase 25-35 Sq. mm (Type A- Single Phase/Type B- Three Phase)
2450
-
-
Stay Clamp of Ms Flat (50x6mm)
3150
-
-
Nut & Bolts with washers (assorted)
1260
-
-
HVDS Works
-
-
-
Engineering, drawing & supply of 1 KM 11KV line using ACSR (weasel) on 9 mtr Long GI Pole supports with Span of 50 Meters having cross bracing in each Double pole as per TS & approved Drawing. (in HVDS Work)
-
-
-
9 M long Steel Tubular poles with welded steel base plate of Designation 540 SP 28 (IS 2713, Pt I, II, III 1980) As per approved drawing.
1100
-
-
PCC Pole (9 mtr/180Kg)
5
-
-
M.S Angle (65x65x6mm) (Length 2.5 m)
20000
-
-
M.S Channel (75x40x6)mm (Length 1.5 m)
12240
-
-
Galvanised Stay Set with anchor plate (200x200x6mm), 50x8mm stay
clamp, nut bolts, 2 Nos turn buckles, 1.8 m long, 16 mm diameter solid GS Stay rod etc as required as per technical specification, approved drawings and scope of work.
1000
-
-
GI Stranded Stay wire 7/3.15 mm dia
3750
-
-
Stay insulator (HT)
750
-
-
11 KV polymer Disc insulator
1350
-
-
11 KV Disc Fittings
1350
-
-
11 KV polymer Pin insulator
2850
-
-
A.C.S.R 6/2.59+1/2.59 mm 30 Sq. mm Al (Weasel) (Considering 3% sag)
155
-
-
G.I Wire ( 8 SWG )
11900
-
-
Nut & Bolts with washers (assorted)
2400
-
-
Stay Clamps of Ms Flat (50x6mm)
1000
-
-
Bracket Clamps of Ms Flat (50x6mm)
5050
-
-
Engineering, drawing & supply of 1 KM 11KV line using ACSR (Rabbit) on 9 mtr Long GI Pole supports with Span of 50 Meters having cross bracing in each Double pole as per TS & Approved Drawing. (In HVDS work)
-
-
-
9 M long Steel Tubular poles with welded steel base plate of Designation 540 SP 28 (IS 2713, Pt I, II, III 1980) As per approved drawing.
1232
-
-
M.S Angle (65x65x6mm) (Length 2.5 m)
2240
-
-
M.S Channel (75x40x6)mm (Length 1.5 m)
12880
-
-
Galvanised Stay Set with anchor plate (200x200x6mm), 50x8mm stay
clamp, nut bolts, 2 Nos turn buckles, 1.8 m long, 16 mm diameter solid GS Stay rod etc as required as per technical specification, approved drawings and scope of work.
840
-
-
GI Stranded Stay wire 7/3.15 mm dia
4088
-
-
Stay insulator (HT)
840
-
-
11 KV polymer Disc insulator
1232
-
-
11 KV Disc Fittings
1232
-
-
11 KV polymer Pin insulator
3080
-
-
A.C.S.R 6/3.35 + 1/3.35 mm 50 Sq.mm Al (Rabbit)
173.6
-
-
G.I Wire ( 8 SWG )
13328
-
-
Nut & Bolts with washers (assorted)
2688
-
-
Stay Clamps of Ms Flat (50x6mm)
840
-
-
Bracket Clamps of Ms Flat (50x6mm)
5488
-
-
Engineering, drawing & supply of new 11/0.4 KV, outdoor type, oil immersed 25 KVA Distribution Transformer Substations with all accessories as per scope of work, approved drawings and technical specifications: (HVDS Work)
-
-
-
9 M long Steel Tubular poles with welded steel base plate of Designation 540 SP 32 (IS 2713, Pt I, II, III 1980). as per Technical Specification, approved Drawing & Scope of works
194
-
-
50 sqmm single core XLPE Aluminium Conductor, Stranded, unarmoured cable. as per Technical Specification, approved Drawing & Scope of works.
7760
-
-
70 sqmm single core XLPE Aluminium Conductor, Stranded, unarmoured cable. as per Technical Specification, approved Drawing & Scope of works.
3880
-
-
P G clamp for 30/50 sq.mm AS per IS 8309
582
-
-
11 KV pin Insulator ( Polymer) with GI Pin and Hardware fittings. as per scope of work. as per Technical Specification, approved Drawing & Scope of works
291
-
-
11 KV disc Insulator (Polymer) 45 KN with Strain H/W Fitting. as per scope of work. as per Technical Specification, approved Drawing & Scope of works
291
-
-
11 KV, 600 A, 3-pole Horizontal/Vertical Mounting type, Gang Operated, AB Switch along with Support Insulators, Base Channel, down Pipe, Arcing Horns etc. AB Switch for Distribution Transformer Substation.as per Technical Specification, approved Drawing & Scope of works
97
-
-
11 KV Lightening Arrestor S/stn.Type Heavy Duty 9 KV, 10 KA Distribution Class Lightening Arrester for DT.as per technical specification, approved drawings and scope of work.
97
-
-
11/0.433 KV outdoor type, oil immersed, Distribution Transformer 25 KVA, 3 phase Aluminium wound DTR. Stack type CRGO Core fitted. as per IS 2026 IS1180 (Part-1): 2014 and its amendments 1, 2, 3 and 4, CRGO/Amorphous core, Energy Efficiency Level 1, carrying Bureau of Indian Standard Certificate mark with all accessories as per scope of work, approved drawings and specifications.
97
-
-
Clamp (50 x 6 mm Flat) for Top Channel [GALVANIZED]
388
-
-
Clamp (50 x 6 mm) for AB switch base channel [GALVANIZED]
388
-
-
Stay clamp side/angle (50 x 10 mm)
388
-
-
MS Channel (100x50x6 mm) for 11 KV AB switch [GALVANIZED]
194
-
-
11KV Top Channel (100x50x6) 9.56 kg per meter [GALVANIZED]
291
-
-
MS Angle for L T distribution bus (35 x 35 x6 mm) [GALVANIZED]
97
-
-
Transformer Base Channel (100x50x6 mm) [GALVANIZED]
194
-
-
MS Channel (75x40x6 mm)for supporting H.G fuse & L.A [GALVANIZED]
194
-
-
Transformer belting (50x50x6 mm) & belting support (40x40x6 mm)[GALVANIZED] (L=2.5m)
194
-
-
Clamp (50 x 6 mm) for Transformer base channel [GALVANIZED]
582
-
-
Clamp (50 x 6 mm) for Transformer belting [ GALVANIZED]
388
-
-
Clamp (50 x 6 mm) for LT bus & H.G fuse set [ GALVANIZED]
388
-
-
Male female contact of 11 KV AB Switch 600 Amp
97
-
-
Complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 Nos.) as per technical specifications, approved drawings and scope of works.
388
-
-
Aluminium binding wire
970
-
-
GI Wire No. 8 SWG
970
-
-
M S Nuts , Bolts and Washers (Assorted). Galvanized.
2037
-
-
Aluminium Tape
970
-
-
Stone Base plate for 11/415 KV DSS
194
-
-
Anti-climbing Devices (Barbed wire) 2.5 mm Dia /12 SWG Galvanized
776
-
-
Miscelenious Hardwares ( Inc. safety equipment, Sign Board(as per approved drawing)
97
-
-
LT Distribution box suitable for 25 KVA transformer (100 A, isolator & 6 SP MCCB of 100 A). Outdoor mounting type Distribution box made of MS sheet of thickness not less than 18 SWG CRCA sheet/ SMC Distribution Box, dust and moisture vermin, weather proof with degree of protection with suitable bus bars, earthing cum neutral bus, earthing terminals, box illumination, front door operated with proper locking arrangement, lugs, mounting channel frame, internal wiring with FRLS cables, danger plate, numbering, back clamps, hardware as per scope of the work, technical specifications and approved drawings suitable for following transformer: (as per technical specifications, approved drawings and scope of works)
97
-
-
MS Flat (75x40x6 mm)[ GALVANIZED]
970
-
-
Earth clamp for earthwire (50 x 6 mm)[GALVANIZED]
194
-
-
11 KV Earthing (Chemical) with 3 Nos pipe earthing using 20mm dia GI pipe 2 mtrs. Long. making earth grid using 50x6mm GI Flat and riser and connecting risers to various equipment as per technical specifications, scope of works and approved drawings.
97
-
-
Danger Plate 11KV as per technical specifications, scope of works and approved drawings.
194
-
-
11 kV, 3-ph, Drop Out fuse units (set of 3 units) along with Support Insulators, Base Channel, fuse barrel etc. complete as per technical specifications, scope of works and approved drawings.
97
-
-
OPC CEMENT
388
-
-
Engineering, drawing & supply of new 11/0.4 KV, outdoor type, oil immersed 63 KVA Distribution Transformer Substations with all accessories as per scope of work, approved drawings and technical specifications: (HVDS Work)
-
-
-
9 M long Steel Tubular poles with welded steel base plate of Designation 540 SP 32 (IS 2713, Pt I, II, III 1980). as per Technical Specification, approved Drawing & Scope of works
18
-
-
50 sqmm single core XLPE Aluminium Conductor, Stranded, unarmoured cable. as per Technical Specification, approved Drawing & Scope of works.
720
-
-
70 sqmm single core XLPE Aluminium Conductor, Stranded, unarmoured cable. as per Technical Specification, approved Drawing & Scope of works.
360
-
-
P G clamp for 30/50 sq.mm AS per IS 8309
54
-
-
11 KV pin Insulator ( Polymer) with GI Pin and Hardware fittings. as per scope of work. as per Technical Specification, approved Drawing & Scope of works
27
-
-
11 KV disc Insulator (Polymer) 45 KN with Strain H/W Fitting. as per scope of work. as per Technical Specification, approved Drawing & Scope of works
27
-
-
11 KV, 600 A, 3-pole Horizontal/Vertical Mounting type, Gang Operated, AB Switch along with Support Insulators, Base Channel, down Pipe, Arcing Horns etc. AB Switch for Distribution Transformer Substation.as per Technical Specification, approved Drawing & Scope of works
9
-
-
11 KV Lightening Arrestor S/stn.Type Heavy Duty 9 KV, 10 KA Distribution Class Lightening Arrester for DT.as per technical specification, approved drawings and scope of work.
9
-
-
11/0.433 KV outdoor type, oil immersed, Distribution Transformer 63 KVA, 3 phase Aluminium wound DTR. , Stack type CRGO Core fitted. as per IS1180 (Part-1): 2014 and its amendments 1, 2, 3 and 4, CRGO/Amorphous core, Energy Efficiency Level 1, carrying Bureau of Indian Standard Certificate mark with all accessories as per scope of work, approved drawings and specifications.
9
-
-
Clamp (50 x 6 mm Flat) for Top Channel [GALVANIZED]
36
-
-
Clamp (50 x 6 mm) for AB switch base channel [GALVANIZED]
36
-
-
Stay clamp side/angle (50 x 10 mm)
36
-
-
MS Channel (100x50x6 mm) for 11 KV AB switch [GALVANIZED]
27
-
-
11KV Top Channel (100x50x6) 9.56 kg per meter [GALVANIZED]
18
-
-
MS Angle for L T distribution bus (35 x 35 x6 mm) [GALVANIZED]
9
-
-
Transformer Base Channel (100x50x6 mm) [GALVANIZED]
18
-
-
MS Channel (75x40x6 mm)for supporting H.G fuse & L.A [GALVANIZED]
18
-
-
Transformer belting (50x50x6 mm) & belting support (40x40x6 mm)[GALVANIZED]
18
-
-
Clamp (50 x 6 mm) for Transformer base channel [GALVANIZED]
54
-
-
Clamp (50 x 6 mm) for Transformer belting [ GALVANIZED]
36
-
-
Clamp (50 x 6 mm) for LT bus & H.G fuse set [ GALVANIZED]
36
-
-
Male female contact of 11 KV AB Switch 600 Amp
9
-
-
Complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 Nos.) as per technical specifications, approved drawings and scope of works.
36
-
-
Miscellaneous spares.
9
-
-
LT Distribution box suitable for 63 KVA transformer (200 A, isolator & 6 SP MCCB of 100 A). Outdoor mounting type Distribution box made of MS sheet of thickness not less than 18 SWG CRCA sheet/ SMC Distribution Box, dust and moisture vermin, weather proof with degree of protection with suitable bus bars, earthing cum neutral bus, earthing terminals, box illumination, front door operated with proper locking arrangement, lugs, mounting channel frame, internal wiring with FRLS cables, danger plate, numbering, back clamps, hardware as per scope of the work, technical specifications and approved drawings suitable for following transformer: as per technical specifications, approved drawings and scope of works.
9
-
-
Aluminium binding wire
90
-
-
8 SWG GI Wire
90
-
-
M S Nuts , Bolts and Washers (Assorted). Galvanized.
189
-
-
Aluminium Tape
90
-
-
Stone Base plate for 11/415 KV,D.S.S.
18
-
-
Anti-climbing Devices (Barbed wire) 2.5 mm Dia /12 SWG Galvanized
90
-
-
Miscelenious Hardwares ( Inc. safety equipment, Signboard (as per approved drawing),etc.
9
-
-
MS Flat (75x40x6 mm)[ GALVANIZED]
90
-
-
Earth clamp for earthwire (50 x 6 mm)[GALVANIZED]
18
-
-
11 KV Earthing (Chemical) with 3 Nos pipe earthing using 20mm dia GI pipe 2 mtrs. Long. making earth grid using 50x6mm GI Flat and riser and connecting risers to various equipment as per technical specifications, scope of works and approved drawings.
9
-
-
Danger Plate 11KV as per technical specifications, scope of works and approved drawings.
18
-
-
11 kV, 3-ph, Drop Out fuse units (set of 3 units) along with Support Insulators, Base Channel, fuse barrel etc. complete as per technical specifications, scope of works and approved drawings.
9
-
-
OPC Cement & other aggregates
54
-
-
Engineering, drawing & supply of LT line 3-phase 5 wire using LT AB Cable 35 sq mm support on 8 Mtr Long STP pole as per TS & approved drawing (HVDS Work)
-
-
-
8 M long Steel Tubular poles with welded steel base plate of Designation 540 SP 15 (IS 2713, Pt I, II, III 1980) galvanized
650
-
-
LT AB Cable 3x35 +1x16+1x25 Sq. mm
28.6
-
-
Galvanised Stay Set with anchor plate (200x200x6mm), 50x8mm stay
clamp, nut bolts, 2 Nos turn buckles, 1.8 m long, 16 mm diameter solid GS Stay rod etc as required as per technical specification, approved drawings and scope of work.
468
-
-
Stay Insulator
468
-
-
Stay Wire (7/4)mm 8 SWG
2340
-
-
Suspension clamp Assembly with straps & buckle (35-50mm)
520
-
-
Dead End Clamp assembly with straps & Buckles ( 35-50)mm
104
-
-
Anchor Clamp
208
-
-
IPC Main 16-95 and Tap 4-35 sq mm
2600
-
-
Pole Clamp
650
-
-
Eye Hook
650
-
-
Distribution Box 3 Phase Type A- Single Ph. /Type B- Three Ph.
364
-
-
Stay Clamp of Ms Flat (50x6mm)
468
-
-
Nut & Bolts with washers (assorted)
187.2
-
-
Engineering, drawing & supply of AB Cable Single Phase 25 Sq.mm new line on 8 mtr GI STP Poles As per TS & Approved drawing ( HVDS Work)
-
-
-
8 M long Steel Tubular poles with welded steel base plate of Designation 540 SP 15 (IS 2713, Pt I, II, III 1980) galvanized
250
-
-
LT AB Cable 1X25 +1x16+1x25 Sq. mm (As per IS 7098 (Part-II) 1985 ,IS 8130 1984, IS 5831 1984, IS 3975 1988 , IS 398 Part-IV 1979)
11
-
-
Galvanised Stay Set with anchor plate (200x200x6mm), 50x8mm stay
clamp, nut bolts, 2 Nos turn buckles, 1.8 m long, 16 mm diameter solid GS Stay rod etc as required as per technical specification, approved drawings and scope of
work.
180
-
-
Stay Insulator
180
-
-
Stay Wire (7/4 mm/8 SWG)
900
-
-
Suspension clamp Assembly with straps & buckle (25-50 Sq.mm)
200
-
-
Dead End Clamp assembly with straps & Buckles ( 25-50 sq. mm)
40
-
-
Anchor Clamp
80
-
-
IPC Main 16-95 and Tap 4-35 sq mm
1000
-
-
Pole Clamp
250
-
-
Eye Hook
250
-
-
Distribution Box 3 Phase Type A- Single Ph. /Type B- Three Ph.
140
-
-
Stay Clamp of Ms Flat (50x6mm)
180
-
-
Nut & Bolts with Washers (assorted)
72
-
-
Feeder Bifurcation Work
-
-
-
Engineering, drawing & supply of AB Cable Three Phase 50 Sq.mm new line 8 mtr GI STP Pole. As per Technical Specification and approved drawing. (Feeder bifurcation work)
-
-
-
8 M long Steel Tubular poles with welded steel base plate of Designation 540 SP 15 (IS 2713, Pt I, II, III 1980) galvanized
75
-
-
LT AB Cable 3x50 +1x16+1x35 sq.mm
3.3
-
-
Galvanised Stay Set with anchor plate (200x200x6mm), 50x8mm stay
clamp, nut bolts, 2 Nos turn buckles, 1.8 m long, 16 mm diameter solid GS Stay rod etc as required as per technical specification, approved drawings and scope of work.
57
-
-
Stay Insulator
57
-
-
Stay Wire (7/4 mm/8 SWG)
300
-
-
Sespension clamp Assembly with straps & buckle (35-50 Sq. mm)
75
-
-
Dead End Clamp assembly with straps & Buckles ( 35-50 Sq. mm)
24
-
-
Anchor Clamp
24
-
-
IPC Main 16-95 and Tap 4-50 sq mm
300
-
-
Pole Clamp
75
-
-
Eye Hook
75
-
-
Distribution Box 3 Phase 25-50 Sq.mm TypeA- Single Phase, Type B- Three Phase
60
-
-
Stay Clamp of Ms Flat (50x6mm)
57
-
-
Nut & Bolts with Washers(assorted)
29
-
-
Engineering, drawing & supply of new 11/0.4 KV, outdoor type, oil immersed 100 KVA Distribution Transformer Substations with all accessories as per scope of work, approved drawings and technical specifications: (Feeder Bifurcation work)
-
-
-
9 M long Steel Tubular poles with welded steel base plate of Designation 540 SP 32 (IS 2713, Pt I, II, III 1980). as per Technical Specification, approved Drawing & Scope of works
6
-
-
50 sqmm single core XLPE Aluminium Conductor, Stranded, unarmoured cable. as per Technical Specification, approved Drawing & Scope of works.
240
-
-
70 sqmm single core XLPE Aluminium Conductor, Stranded, unarmoured cable. as per Technical Specification, approved Drawing & Scope of works.
120
-
-
P G clamp for 30/50 sq.mm as per IS 8309
18
-
-
11 KV pin Insulator ( Polymer) with GI Pin and Hardware fittings. as per scope of work. as per Technical Specification, approved Drawing & Scope of works
9
-
-
11 KV disc Insulator (Polymer) 45 KN with Strain H/W Fitting. as per scope of work. as per Technical Specification, approved Drawing & Scope of works
9
-
-
11 KV, 600 A, 3-pole Horizontal/Vertical Mounting type, Gang Operated, AB Switch along with Support Insulators, Base Channel, down Pipe, Arcing Horns etc. AB Switch for Distribution Transformer Substation.as per Technical Specification, approved Drawing & Scope of works
3
-
-
11 KV Lightening Arrestor S/stn.Type Heavy Duty 9 KV, 10 KA Distribution Class Lightening Arrester for DT.as per technical specification, approved drawings and scope of work.
3
-
-
11/0.433 KV outdoor type, oil immersed, Distribution Transformer 100 KVA, 3 phase Aluminium wound DTR. Stack type CRGO Core fitted. as per IS1180 (Part-1): 2014 and its amendments 1, 2, 3 and 4, CRGO/Amorphous core, Energy Efficiency Level 1, carrying Bureau of Indian Standard Certificate mark with all accessories as per scope of work, approved drawings and specifications.
3
-
-
Clamp (50 x 6 mm Flat) for Top Channel [GALVANIZED]
12
-
-
Clamp (50 x 6 mm) for AB switch base channel [GALVANIZED]
12
-
-
Stay clamp side/angle (50 x 10 mm)
12
-
-
MS Channel (100x50x6 mm) for 11 KV AB switch [GALVANIZED]
9
-
-
11KV Top Channel (100x50x6) 9.56 kg per meter [GALVANIZED]
6
-
-
MS Angle for L T distribution bus (35 x 35 x6 mm) [GALVANIZED]
3
-
-
Transformer Base Channel (100x50x6 mm) [GALVANIZED]
6
-
-
MS Channel (75x40x6 mm)for supporting H.G fuse & L.A [GALVANIZED]
6
-
-
Transformer belting (50x50x6 mm) & belting support (40x40x6 mm)[GALVANIZED]
6
-
-
Clamp (50 x 6 mm) for Transformer base channel [GALVANIZED]
18
-
-
Clamp (50 x 6 mm) for Transformer belting [ GALVANIZED]
12
-
-
Clamp (50 x 6 mm) for LT bus & H.G fuse set [ GALVANIZED]
12
-
-
Male female contact of 11 KV AB Switch 600 Amp
3
-
-
complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 Nos.) as per technical specifications, approved drawings and scope of works.
12
-
-
Necessary miscellaneous Spares
3
-
-
LT Distribution box with suitable rating MCCB for incomer & Kit-Kat for two no outgoing feeder suitable for 3-Phase 11/0.4 kV, 100 kVA, Distribution Transformer alongwith energymeter suitable for pole mounting as per TS
3
-
-
Aluminium binding wire
30
-
-
GI Wire No. 8
30
-
-
M S Nuts , Bolts and Washers (Assorted). Galvanized.
63
-
-
Aluminium Tape
30
-
-
Stone Base plate for 11/ 415 KV DSS
6
-
-
Anti-climbing Devices (Barbed wire) 2.5 mm Dia /12 SWG Galvanized
30
-
-
MS Flat (75x40x6 mm)[ GALVANIZED]
30
-
-
Earth clamp for earthwire (50 x 6 mm)[GALVANIZED]
6
-
-
11 KV Earthing (Chemical) with 3 Nos pipe earthing using 20mm dia GI pipe 2 mtrs. Long. making earth grid using 50x6mm GI Flat and riser and connecting risers to various equipment as per technical specifications, scope of works and approved drawings.
3
-
-
Danger Plate 11KV as per technical specifications, scope of works and approved drawings.
6
-
-
Miscelenious Hardwares ( Inc. safety equipment, Sign board (as per approved drawing),etc.
3
-
-
11 kV, 3-ph, Drop Out fuse units (set of 3 units) along with Support Insulators, Base Channel, fuse barrel etc. complete as per technical specifications, scope of works and approved drawings.
3
-
-
OPC CEMENT
18
-
-
Engineering, drawing & supply of new 11/0.4 KV, outdoor type, oil immersed 63 KVA Distribution Transformer Substations with all accessories as per scope of work, approved drawings and technical specifications: (Feeder Bifurcation Work)
-
-
-
9 M long Steel Tubular poles with welded steel base plate of Designation 540 SP 32 (IS 2713, Pt I, II, III 1980). as per Technical Specification, approved Drawing & Scope of works
24
-
-
50 sqmm single core XLPE Aluminium Conductor, Stranded, unarmoured cable. as per Technical Specification, approved Drawing & Scope of works.
960
-
-
70 sqmm single core XLPE Aluminium Conductor, Stranded, unarmoured cable. as per Technical Specification, approved Drawing & Scope of works.
480
-
-
P G clamp for 30/50 sq.mm as per IS 8309
72
-
-
11 KV pin Insulator ( Polymer) with GI Pin and Hardware fittings. as per scope of work. as per Technical Specification, approved Drawing & Scope of works
36
-
-
11 KV disc Insulator (Polymer) 45 KN with Strain H/W Fitting. as per scope of work. as per Technical Specification, approved Drawing & Scope of works
36
-
-
11 KV, 600 A, 3-pole Horizontal/Vertical Mounting type, Gang Operated, AB Switch along with Support Insulators, Base Channel, down Pipe, Arcing Horns etc. AB Switch for Distribution Transformer Substation.as per Technical Specification, approved Drawing & Scope of works
12
-
-
11 KV Lightening Arrestor S/stn.Type Heavy Duty 9 KV, 10 KA Distribution Class Lightening Arrester for DT.as per technical specification, approved drawings and scope of work.
12
-
-
11/0.433 KV outdoor type, oil immersed, Distribution Transformer 63 KVA, 3 phase Aluminium wound DTR. Stack type CRGO Core fitted. as per IS1180 (Part-1): 2014 and its amendments 1, 2, 3 and 4, CRGO/Amorphous core, Energy Efficiency Level 1, carrying Bureau of Indian Standard Certificate mark with all accessories as per scope of work, approved drawings and specifications.
12
-
-
Clamp (50 x 6 mm Flat) for Top Channel [GALVANIZED]
48
-
-
Clamp (50 x 6 mm) for AB switch base channel [GALVANIZED]
48
-
-
Stay clamp side/angle (50 x 10 mm)
48
-
-
MS Channel (100x50x6 mm) for 11 KV AB switch [GALVANIZED]
36
-
-
11KV Top Channel (100x50x6) 9.56 kg per meter [GALVANIZED]
24
-
-
MS Angle for L T distribution bus (35 x 35 x6 mm) [GALVANIZED]
12
-
-
Transformer Base Channel (100x50x6 mm) [GALVANIZED]
24
-
-
MS Channel (75x40x6 mm)for supporting H.G fuse & L.A [GALVANIZED]
24
-
-
Transformer belting (50x50x6 mm) & belting support (40x40x6 mm)[GALVANIZED]
24
-
-
Clamp (50 x 6 mm) for Transformer base channel [GALVANIZED]
72
-
-
Clamp (50 x 6 mm) for Transformer belting [ GALVANIZED]
48
-
-
Clamp (50 x 6 mm) for LT bus & H.G fuse set [ GALVANIZED]
48
-
-
Male female contact of 11 KV AB Switch 600 Amp
12
-
-
complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 Nos.) as per technical specifications, approved drawings and scope of works.
48
-
-
Miscellaneous Hardwares spares
12
-
-
LT Distribution box suitable for 63 KVA transformer (200 A, isolator & 6 SP MCCB of 100 A). Outdoor mounting type Distribution box made of MS sheet of thickness not less than 18 SWG CRCA sheet/ SMC Distribution Box, dust and moisture vermin, weather proof with degree of protection with suitable bus bars, earthing cum neutral bus, earthing terminals, box illumination, front door operated with proper locking arrangement, lugs, mounting channel frame, internal wiring with FRLS cables, danger plate, numbering, back clamps, hardware as per scope of the work, technical specifications and approved drawings suitable for following transformer: as per technical specifications, approved drawings and scope of works.
12
-
-
Aluminium binding wire
120
-
-
GI Wire No. 8 SWG
120
-
-
M S Nuts , Bolts and Washers (Assorted). Galvanized.
252
-
-
Aluminium Tape
120
-
-
Stone Base plate for 11/415 KV DSS.
24
-
-
Anti-climbing Devices (Barbed wire) 2.5 mm Dia /12 SWG Galvanized
120
-
-
Miscellaneous Hardwares ( Inc. safety equipment, Sign Board (As per Approved Drawing), etc)
12
-
-
MS Flat (75x40x6 mm)[ GALVANIZED]
120
-
-
Earth clamp for earthwire (50 x 6 mm)[GALVANIZED]
24
-
-
11 KV Earthing (Chemical) with 3 Nos pipe earthing using 20mm dia GI pipe 2 mtrs. Long. making earth grid using 50x6mm GI Flat and riser and connecting risers to various equipment as per technical specifications, scope of works and approved drawings.
12
-
-
Danger Plate 11KV as per technical specifications, scope of works and approved drawings.
24
-
-
11 kV, 3-ph, Drop Out fuse units (set of 3 units) along with Support Insulators, Base Channel, fuse barrel etc. complete as per technical specifications, scope of works and approved drawings.
12
-
-
OPC CEMENT
72
-
-
Engineering, drawing & supply of 11KV line using ACSR (Rabbit) on 9 mtr Long GI Pole supports with Span of 50 Meters having cross bracing in each Double pole As per technical Specification & approved drawings. (Feeder Bifurcation Work)
-
-
-
9 M long Steel Tubular poles with welded steel base plate of Designation 540 SP 32 (IS 2713, Pt I, II, III 1980). as per Technical Specification, approved Drawing & Scope of works
572
-
-
M.S Angle (65x65x6mm)
8840
-
-
M.S Channel (75x40x6 mm)
5590
-
-
Galvanised Stay Set with anchor plate (200x200x6mm), 50x8mm stay
clamp, nut bolts, 2 Nos turn buckles, 1.8 m long, 16 mm diameter solid GS Stay rod etc as required as per technical specification, approved drawings and scope of work.
390
-
-
Stranded GI Stay wire 7/3.15 mm dia
1794
-
-
Stay insulator (HT)
390
-
-
11 KV polymer Disc insulator
702
-
-
11 KV Disc Fittings
702
-
-
11 KV polymer Pin insulator
1482
-
-
A.C.S.R 6/3.35+1/3.35mm, 50 sq.mm Al. (Rabbit)
80.6
-
-
G.I Wire ( 8 SWG )
5460
-
-
Nut & Bolts with washers. (assorted)
1040
-
-
Stay Clamps of Ms Flat (50x6mm)
390
-
-
Bracket Clamps of Ms Flat (50x6mm)
2340
-
-
Engineering, drawing & supply of LT line 3-phase 5 wire using LT AB Cable 35 sq mm support on 8 Mtr Long STP pole As per technical Specification & Approved drawing(Feeder Bifurcation Work)
-
-
-
8 M long Steel Tubular poles with welded steel base plate of Designation 540 SP 15 (IS 2713, Pt I, II, III 1980) galvanized
75
-
-
LT AB Cable 3x35 + 1x16 + 1x25 Sq.mm
3.3
-
-
Galvanised Stay Set with anchor plate (200x200x6mm), 50x8mm stay
clamp, nut bolts, 2 Nos turn buckles, 1.8 m long, 16 mm diameter solid GS Stay rod etc as required as per technical specification, approved drawings and scope of work.
54
-
-
Stay Insulator
54
-
-
Stranded GI Stay wire 7/4 mm dia
270
-
-
Sespension clamp Assembly with straps & buckle (35-50 Sq. mm)
60
-
-
Dead End Clamp assembly with straps & Buckles ( 35-50 Sq. mm)
12
-
-
Anchor Clamp
24
-
-
IPC Main 16-95 and Tap 4-35 sq mm
300
-
-
Pole Clamp
75
-
-
Eye Hook
75
-
-
Distribution Box 3 Phase 25-35 Sq. mm (Type A- Single Phase/Type B- Three Phase)
42
-
-
Stay Clamp of Ms Flat (50x6mm)
54
-
-
Nut & Bolts with washers (assorted)
21.6
-
-
Other Works
-
-
-
Engineering, drawing & supply of Capacitor bank 2.4 MVAR As per Technical Spec & approved Drawings. (Other Works)
-
-
-
11 kv VCB with control pannel complete set & CT & PT & structure for capacitor bank
2
-
-
Out door capacitor bank set (2.4 MVAR)complete with structure & reactor voltage transformer etc. (As per IS 13925 , IS 5553)
2
-
-
11 kv XLPE cable 3Cx 95sq mm. armoured
100
-
-
11 kv cable box kit
8
-
-
Rail pole 13 mtr long 60 kg
4
-
-
Stone Pad 300x300x75 mm
4
-
-
33 kv top channel 125x65mm 3.2 mtr long GI
2
-
-
Cross Bracing set 50x50x6 mm
2
-
-
33 kv composite polymer pin insulator with nut & washer.
6
-
-
E clamp
6
-
-
33 kv composite polymer type disc insulator with hardware fitting
12
-
-
earth wire clamp for 9 mtr long ST pole
2
-
-
PP & Clamp for 13 mtr Rail pole
4
-
-
Bracing Clamp for Rail pole(Top end Bottom)
4
-
-
Stay clamp for Rail pole
12
-
-
Number plate with clamp
2
-
-
Danger board
2
-
-
PG clamp for Panther conductor
24
-
-
MS nut & Bolts with washers (Assorted).
8
-
-
Aluminium binding wire(5mm dia)
10
-
-
Aluminium binding tape
10
-
-
Aluminium Paint
10
-
-
Red oxide Paint
10
-
-
Earthing Pipe 40 mm dia 7 fit
2
-
-
GI wire 6 SWG
2
-
-
Barbed wire
8
-
-
Rod type Earthing Complete including GI wire 6 SWG
2
-
-
Replacement of of 11 kV VCB with CT & CR Panel from existing 11KV VCB & its accessories as per approved drawing and Technical Specification. (Other Works)
-
-
-
11 KV VCB, 12KV, Outdoor type, 630 A, 25 KA for 3 sec. rupturing capacity
CT 600-400-200-100/1-1A, 2 Core, Accuracy 1.0, & VA Burden 15 VA & 15 VA
PT 11KV / 110V, Accuracy class 1, VA Burden 100VA, Single Core
2
-
-
Structure for 11 KV CT [Galvanized]
2
-
-
Structure for 11 KV PT [Galvanized]
2
-
-
2.5 sq mm CU 10 C control cable (Armoured)
60
-
-
Replacement of 11 KV AB switch 400 A As per approved drawing & Technical Specification. (Other Works)
-
-
-
9.0 mtr long Galvanised Steel Pole
18
-
-
M.S Angle (65x65x6mm)
180
-
-
M.S Channel (75x40x6) mm
720
-
-
Stay set complete
18
-
-
Stranded wire 7/3.15 mm Dia
90
-
-
Stay insulator (HT)
18
-
-
11 KV polymer Disc insulator
54
-
-
11 KV Disc Fittings
54
-
-
11 KV polymer Pin insulator
27
-
-
11kV GOS/AB Switch
9
-
-
11kV DOF/HG Fuse
9
-
-
A.C.S.R (Weasel/Rabbit)
0.9
-
-
G.I Wire ( 8 SWG )
45
-
-
Nut & Bolts with washer (assorted)
27
-
-
Stay Clamps of MS Flat (50x6mm)
18
-
-
Bracket Clamps of MS Flat (50x6mm)
90
-
-
Coil Earthing
18
-
-
30-50 sqmm Bimetallic Lugs
108
-
-
Erection
-
-
-
LT Cable related works (Replacement)
-
-
-
Erection, testing & commissioning of 3-ph 50 Sq. mm AB Cable Replacement Work (8 Mtr GI STP Pole) Replacement work as per approved Drawing.
-
-
-
Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Project Manager for LT line.
547
-
-
Excavation of pole pits (of dept 1/6th of pole length) in all type of soil as per scope of work, approved drawings and specifications.
3829
-
-
Erection of 8 mtr STP(GI)/PCC poles for LT overhead line by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (8SWG GI wire), pole numbering including cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) or/and 200 mm average size bolders mixed with excavated earth etc as per scope of work, approved drawings and specifications:
3829
-
-
Stringing of Three Phase LT Aerial Bunched Cable (3Cx50+1x35+1x16 sq.mm), sq. mm with bare messenger wire including erection of eyehooks & eyehook clamps, suspension & dead clamps and all accessories as per approved drawings. This would include supply & erection of jointing kits, end caps, connectors for ABC to ABC tapping including supply of connectors (IPC Type-I & Type- II) used for tapping Including removal of existing LT bare conductor line & fixtures, depositing to stores of employer.
547
-
-
Erection of complete stay set with GI stay wire ,Including Excavation of stay pit in all kind of soil , binding of stay wire, by providing Guy stay insulator and
0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.
2188
-
-
Erection of 3 Phase LT distribution boxes/kiosk on the LT poles including all calmps & material required for mounting connections & sealing.
7658
-
-
Erection, testing & commissioning of 3-ph 35 Sq. Mm AB Cable Replacement (8 Mtr GI STP Pole) Replacement work As per approved drawing.
-
-
-
Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Project Manager for LT line.
175
-
-
Excavation of pole pits (of dept 1/6th of pole length) in all type of soil as per scope of work, approved drawings and specifications.
1225
-
-
Erection of 8 mtr STP (GI)/PCC poles for LT overhead line by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (8SWG GI wire), pole numbering including cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) or/and 200 mm average size bolders mixed with excavated earth etc as per scope of work, approved drawings and specifications:
1225
-
-
Stringing of Three Phase LT Aerial Bunched Cable (3Cx35+1x25+1x16 sq.mm), sq. mm with bare messenger wire including erection of eyehooks & eyehook clamps, suspension & dead clamps and all accessories as per approved drawings. This would include supply & erection of jointing kits, end caps, connectors for ABC to ABC tapping including supply of connectors (IPC Type-I & Type- II) used for tapping Including removal of existing LT bare conductor line & fixtures, depositing to stores of employer.
175
-
-
Erection of complete stay set with GI stay wire ,Including Excavation of stay pit in all kind of soil , binding of stay wire, by providing Guy stay insulator and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.
700
-
-
Erection of 3 Phase LT distribution boxes/kiosk on the LT poles including all calmps & material required for mounting connections & sealing.
4
-
-
HVDS Works
-
-
-
Erection, testing & commissioning of 11KV line using ACSR (weasel) on 9 mtr Long GI Pole supports with Span of 50 Meters having cross bracing in each Double pole (HVDS Work) As per approved drawing.
-
-
-
Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Project Manager for 11 KV line
50
-
-
Excavation of pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:
1050
-
-
Erection of 9 mtr STP (GI) /PCC poles for 11 KV overhead lines by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (8SWG GI wire), pole numbering including cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) or/and 200 mm average size bolders mixed with excavated earth etc as per scope of work, approved drawings and specifications:
1050
-
-
Stringing of S/C 3- ph, 3-wire, 11 KV line with ACSR Weasel conductor (Average span 45 meters).This includes all activities i.e. installation of polymer insulators with mounting hardware , stringing of conductor, binding of conductor with pin insulator using preformed insulator binding, mid span jointing, repairing of conductor using repair sleeve if unavidable, fixing of anti climbing device & danger plate on all 2/3/4 Pole structures & road crossing poles, jumpering etc. complete in all respect. This includes supply and installation of repair sleeves, mid span joint, danger plate.
50
-
-
Erection, testing & commissioning of Pre-fabricated steel items like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, transformer mounting structure, DO mounting channel, Transformer clamping set, bracket, clamps, cross bracings, bracings, strain clamp, guarding channels, back clamp and MS nut, bolts & washers etc as per technical specification, approved drawings and scope of work.
1050
-
-
Erection of complete 11KV stay set with GI stay wire (7x3.15 mm dia),Including Excavation of stay pit in all kind of soil , binding of stay wire, by providing Guy stay insulator and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.
1000
-
-
Installation of Strut Pole as per approved drawing including escavation work and all necessary hard ware fittings
50
-
-
Erection, testing & commissioning of earthing arrangement using 8 SWG GI Wire, GI nuts, bolts & washers as per technical specification, approved drawings and scope of work.
1050
-
-
Erection, testing & commissioning of 11KV line using ACSR (Rabbit) on 9 mtr Long GI Pole supports with Span of 50 Meters having cross bracing in each Double pole (HVDS Work) As per approved drawing.
-
-
-
Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Project Manager for 11 KV line
56
-
-
Excavation of pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:
1176
-
-
Erection of 9 mtr STP (GI)/ PCC poles for 11 KV overhead lines by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (8SWG GI wire), pole numbering including cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) or/and 200 mm average size bolders mixed with excavated earth etc as per scope of work, approved drawings and specifications:
1176
-
-
Stringing of S/C 3- ph, 3-wire, 11 KV line with ACSR Rabbit conductor (Average span 45 meters).This includes all activities i.e. installation of polymer insulators with mounting hardware , stringing of conductor, binding of conductor with pin insulator using preformed insulator binding, mid span jointing, repairing of conductor using repair sleeve if unavidable, fixing of anti climbing device & danger plate on all 2/3/4 Pole structures & road crossing poles, jumpering etc. complete in all respect. This includes supply and installation of repair sleeves, mid span joint, danger plate.
56
-
-
Erection, testing & commissioning of Pre-fabricated steel items like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, transformer mounting structure, DO mounting channel, Transformer clamping set, bracket, clamps, cross bracings, bracings, strain clamp, guarding channels, back clamp and MS nut, bolts & washers etc as per technical specification, approved drawings and scope of work.
1176
-
-
Erection of complete 11KV stay set with GI stay wire (7x3.15 mm dia),Including Excavation of stay pit in all kind of soil , binding of stay wire, by providing Guy stay insulator and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.
1176
-
-
Installation of Strut Pole as per approved drawing including escavation work and all necessary hard ware fittings
56
-
-
Erection, testing & commissioning of earthing arrangement using 8 SWG GI Wire, GI nuts, bolts & washers as per technical specification, approved drawings and scope of work.
1176
-
-
Erection, testing & commissioning of 11/.433 KV DSS With 25 KVA Distribution Transformer (HVDS Work) As per approved drawing.
-
-
-
Erection of 9 M long STP/PCC poles with welded steel base plate of Designation 540 SP 32 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt. including Excavation of pole pit (of depth 1/6th of pole length) in all type of soil, by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material ( 8SWG GI wire), pole numbering including cement concrete foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) & backfilling of soil etc. as per scope of work, approved drawings and specifications:
194
-
-
Excavation of stay pit in all type of soils and Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 Nos.) with all accessories and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) etc. complete as per technical specifications, approved drawings and scope of works.
388
-
-
Erection, testing, commissioning of 11/0.4 KV Distribution Transformer 25 KVA 3 phase Aluminium wound DTR. Pre-fabricated steel items like DC cross arm (100x50x6 mm), back clamps, pole clamp, DO mounting channel (100x50x6 mm), transformer mounting channel (100x50x6 mm), transformer clamping set (50x50x6 mm), transformer belting set ( 50x50x6 mm), earth clamp (50x6mm), MS flat (75x40x6mm) ,Clamp (50 x 6 mm) for LT bus & H.G fuse set. , all MS material must be Hot Dip Galvanized and MS nuts, bolts & washers, hardware with all its accessories, including 11 kV Disc insulator with strain hardware & 11 KV Pin insulator with GI pin with their hardware fittings and Erection of Outdoor mounting type Distribution box made of MS sheet. dust and moisture vermin, weather proof with degree of protection IP 33 as per IS 13947. 1.1 KV XLPE Aluminium Conductor, Stranded, unarmoured cable for connection of transformer LV bushing to Distribution Box and Distribution box to overhead line. including PG Clamps, bi- metallic connectors, hardware with all accessories, AB Switch for Distribution Transformer Substation. Distribution Class Lightening Arrester for DT. Drop Out fuse units (set of 3 units) along with Support Insulators, Base Channel, fuse barrel etc. complete as per technical specification, approved drawings and scope of work.
97
-
-
Erection, testing and Commissioning of 3 Nos pipe chemical earthing using 20mm dia GI pipe 1.2 m long, as per IS 1161, making earth grid using 50x6mm GI Flat and riser and connecting risers to various equipment, 8 SWG GI wires, GI nuts, bolts & washers etc. complete as per scope of work, approved drawings and technical specifications,
582
-
-
Erection, testing & commissioning of 11/.433 KV DSS With 63 KVA Distribution Transformer (HVDS Work) As per approved drawings.
-
-
-
Erection of 9 M long STP/PCC poles with welded steel base plate of Designation 540 SP 32 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt. including Excavation of pole pit (of depth 1/6th of pole length) in all type of soil, by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material ( 8SWG GI wire), pole numbering including cement concrete foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) & backfilling of soil etc. as per scope of work, approved drawings and specifications:
18
-
-
Excavation of stay pit in all type of soils and Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 Nos.) with all accessories and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) etc. complete as per technical specifications, approved drawings and scope of works.
36
-
-
Erection, testing, commissioning of 11/0.4 KV Distribution Transformer 63 KVA 3 phase Aluminium wound DTR. Pre-fabricated steel items like DC cross arm (100x50x6 mm), back clamps, pole clamp, DO mounting channel (100x50x6 mm), transformer mounting channel (100x50x6 mm), transformer clamping set (50x50x6 mm), transformer belting set ( 50x50x6 mm), earth clamp (50x6mm), MS flat (75x40x6mm) ,Clamp (50 x 6 mm) for LT bus & H.G fuse set. , all MS material must be Hot Dip Galvanized and MS nuts, bolts & washers, hardware with all its accessories, including 11 kV Disc insulator with strain hardware & 11 KV Pin insulator with GI pin with their hardware fittings and Erection of Outdoor mounting type Distribution box made of MS sheet. dust and moisture vermin, weather proof with degree of protection IP 33 as per IS 13947. 1.1 KV XLPE Aluminium Conductor, Stranded, unarmoured cable for connection of transformer LV bushing to Distribution Box and Distribution box to overhead line. including PG Clamps, bi- metallic connectors, hardware with all accessories, AB Switch for Distribution Transformer Substation. Distribution Class Lightening Arrester for DT. Drop Out fuse units (set of 3 units) along with Support Insulators, Base Channel, fuse barrel etc. complete as per technical specification, approved drawings and scope of work.
9
-
-
Erection, testing and Commissioning of 3 Nos pipe chemical earthing using 20mm dia GI pipe 1.2 m long, as per IS 1161, making earth grid using 50x6mm GI Flat and riser and connecting risers to various equipment, 8 SWG GI wires, GI nuts, bolts & washers etc. complete as per scope of work, approved drawings and technical specifications,
27
-
-
Erection, testing & commissioning of LT line 3-phase 5 wire using LT AB Cable 35 sq mm support on 8 Mtr Mtr Long GI pole As per approved drawings. (HVDS Work)
-
-
-
Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Project Manager for LT line.
26
-
-
Excavation of pole pits (of dept 1/6th of pole length) in all type of soil as per scope of work, approved drawings and specifications.
650
-
-
Erection of 8 mtr STP(GI)/PCC poles for LT overhead line by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (8SWG GI wire), pole numbering including cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) or/and 200 mm average size bolders mixed with excavated earth etc as per scope of work, approved drawings and specifications:
650
-
-
Stringing of Three Phase LT Aerial Bunched Cable (3Cx35+1x25+1x16)sq.mm, with bare messenger wire including erection of eyehooks & eyehook clamps, suspension & dead clamps and all accessories as per approved drawings. This would include supply & erection of jointing kits, end caps, connectors for ABC to ABC tapping including supply of connectors (IPC Type-I & Type- II) used for tapping .
26
-
-
Erection of complete stay set with GI stay wire (7x3.15 mm dia),Including Excavation of stay pit in all kind of soil , binding of stay wire, by providing Guy stay insulator and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.
468
-
-
Erection of 3 Phase LT distribution boxes/kiosk on the LT poles including all calmps & material required for mounting connections & sealing.
364
-
-
Erection, testing & commissioning of AB Cable Single Phase 25 Sq.mm new line (8 Mtr GI STP Pole) As per approved drawing HVDS Work
-
-
-
Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Project Manager for LT line.
10
-
-
Excavation of pole pits (of dept 1/6th of pole length) in all type of soil as per scope of work, approved drawings and specifications.
250
-
-
Erection of 8 mtr STP(GI)/PCC poles for LT overhead line by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (8SWG GI wire), pole numbering including cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) or/and 200 mm average size bolders mixed with excavated earth etc as per scope of work, approved drawings and specifications:
250
-
-
Stringing of Three Phase LT Aerial Bunched Cable (1Cx25+1x25+1x16 sq.mm), sq. mm with bare messenger wire including erection of eyehooks & eyehook clamps, suspension & dead clamps and all accessories as per approved drawings. This would include supply & erection of jointing kits, end caps, connectors for ABC to ABC tapping including supply of connectors (IPC Type-I & Type- II) used for tapping .
10
-
-
Erection of complete stay set with GI stay wire (7x3.15 mm dia),Including Excavation of stay pit in all kind of soil , binding of stay wire, by providing Guy stay insulator and
0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.
180
-
-
Erection of Single Phase LT distribution boxes/kiosk on the LT poles including all calmps & material required for mounting connections & sealing.
140
-
-
Feeder Bifurcation Works
-
-
-
Erection, testing & commissioning of AB Cable Three Phase 50 Sq.mm new line (8 Mtr GI STP Pole) As per approved drawing in Feeder Bifurcation work
-
-
-
Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Project Manager for LT line.
3
-
-
Excavation of pole pits (of dept 1/6th of pole length) in all type of soil as per scope of work, approved drawings and specifications.
75
-
-
Erection of 8 mtr STP(GI) /PCC poles for LT overhead line by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (8SWG GI wire), pole numbering including cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) or/and 200 mm average size bolders mixed with excavated earth etc as per scope of work, approved drawings and specifications:
75
-
-
Stringing of Three Phase LT Aerial Bunched Cable (3Cx50+1x35+1x16 sq.mm), sq. mm with bare messenger wire including erection of eyehooks & eyehook clamps, suspension & dead clamps and all accessories as per approved drawings. This would include supply & erection of jointing kits, end caps, connectors for ABC to ABC tapping including supply of connectors (IPC Type-I & Type- II) used for tapping .
3
-
-
Erection of complete stay set with GI stay wire (7x3.15 mm dia),Including Excavation of stay pit in all kind of soil , binding of stay wire, by providing Guy stay insulator and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.
54
-
-
Erection of 3 Phase LT distribution boxes/kiosk on the LT poles including all calmps & material required for mounting connections & sealing.
42
-
-
Erection, testing & commissioning of AB Cable Three Phase 35 Sq.mm new line (8 Mtr GI STP Pole) as per approved drawing in Feeder Bifurcation work
-
-
-
Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Project Manager for LT line.
3
-
-
Excavation of pole pits (of dept 1/6th of pole length) in all type of soil as per scope of work, approved drawings and specifications.
75
-
-
Erection of 8 mtr STP(GI)/PCC poles for LT overhead line by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (8SWG GI wire), pole numbering including cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) or/and 200 mm average size bolders mixed with excavated earth etc as per scope of work, approved drawings and specifications:
75
-
-
Stringing of Three Phase LT Aerial Bunched Cable (3Cx35+1x25+1x16 sq.mm), sq. mm with bare messenger wire including erection of eyehooks & eyehook clamps, suspension & dead clamps and all accessories as per approved drawings. This would include supply & erection of jointing kits, end caps, connectors for ABC to ABC tapping including supply of connectors (IPC Type-I & Type- II) used for tapping .
3
-
-
Erection of complete stay set with GI stay wire (7x3.15 mm dia),Including Excavation of stay pit in all kind of soil , binding of stay wire, by providing Guy stay insulator and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.
54
-
-
Erection of 3 Phase LT distribution boxes/kiosk on the LT poles including all calmps & material required for mounting connections & sealing.
42
-
-
Erection, testing & commissioning of 11/.433 KV DSS With 100 KVA Distribution Transformer as per approved drawing.
-
-
-
Erection of 9 M long STP/PCC poles with welded steel base plate of Designation 540 SP 32 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt. including Excavation of pole pit (of depth 1/6th of pole length) in all type of soil, by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material ( 8SWG GI wire), pole numbering including cement concrete foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) & backfilling of soil etc. as per scope of work, approved drawings and specifications:
6
-
-
Excavation of stay pit in all type of soils and Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 Nos.) with all accessories and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) etc. complete as per technical specifications, approved drawings and scope of works.
12
-
-
Erection, testing, commissioning of 11/0.4 KV Distribution Transformer 100 KVA 3 phase Aluminium wound DTR. Pre-fabricated steel items like DC cross arm (100x50x6 mm), back clamps, pole clamp, DO mounting channel (100x50x6 mm), transformer mounting channel (100x50x6 mm), transformer clamping set (50x50x6 mm), transformer belting set ( 50x50x6 mm), earth clamp (50x6mm), MS flat (75x40x6mm) ,Clamp (50 x 6 mm) for LT bus & H.G fuse set. , all MS material must be Hot Dip Galvanized and MS nuts, bolts & washers, hardware with all its accessories, including 11 kV Disc insulator with strain hardware & 11 KV Pin insulator with GI pin with their hardware fittings and Erection of Outdoor mounting type Distribution box made of MS sheet. dust and moisture vermin, weather proof with degree of protection IP 33 as per IS 13947. 1.1 KV XLPE Aluminium Conductor, Stranded, unarmoured cable for connection of transformer LV bushing to Distribution Box and Distribution box to overhead line. including PG Clamps, bi- metallic connectors, hardware with all accessories, AB Switch for Distribution Transformer Substation. Distribution Class Lightening Arrester for DT. Drop Out fuse units (set of 3 units) along with Support Insulators, Base Channel, fuse barrel etc. complete as per technical specification, approved drawings and scope of work.
3
-
-
Erection, testing and Commissioning of 3 Nos pipe chemical earthing using 20mm dia GI pipe 1.2 m long, as per IS 1161, making earth grid using 50x6mm GI Flat and riser and connecting risers to various equipment, 8 SWG GI wires, GI nuts, bolts & washers etc. complete as per scope of work, approved drawings and technical specifications,
9
-
-
Erection, testing & commissioning of 11/.433 KV DSS With 63 KVA Distribution Transformer As per approved drawing (Feeder Bifurcation Work)
-
-
-
Erection of 9 M long STP/PCC poles with welded steel base plate of Designation 540 SP 32 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt. including Excavation of pole pit (of depth 1/6th of pole length) in all type of soil, by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material ( 8SWG GI wire), pole numbering including cement concrete foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) & backfilling of soil etc. as per scope of work, approved drawings and specifications:
24
-
-
Excavation of stay pit in all type of soils and Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 Nos.) with all accessories and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) etc. complete as per technical specifications, approved drawings and scope of works.
48
-
-
Erection, testing, commissioning of 11/0.4 KV Distribution Transformer 63 KVA 3 phase Aluminium wound DTR. Pre-fabricated steel items like DC cross arm (100x50x6 mm), back clamps, pole clamp, DO mounting channel (100x50x6 mm), transformer mounting channel (100x50x6 mm), transformer clamping set (50x50x6 mm), transformer belting set ( 50x50x6 mm), earth clamp (50x6mm), MS flat (75x40x6mm) ,Clamp (50 x 6 mm) for LT bus & H.G fuse set. , all MS material must be Hot Dip Galvanized and MS nuts, bolts & washers, hardware with all its accessories, including 11 kV Disc insulator with strain hardware & 11 KV Pin insulator with GI pin with their hardware fittings and Erection of Outdoor mounting type Distribution box made of MS sheet. dust and moisture vermin, weather proof with degree of protection IP 33 as per IS 13947. 1.1 KV XLPE Aluminium Conductor, Stranded, unarmoured cable for connection of transformer LV bushing to Distribution Box and Distribution box to overhead line. including PG Clamps, bi- metallic connectors, hardware with all accessories, AB Switch for Distribution Transformer Substation. Distribution Class Lightening Arrester for DT. Drop Out fuse units (set of 3 units) along with Support Insulators, Base Channel, fuse barrel etc. complete as per technical specification, approved drawings and scope of work.
12
-
-
Erection, testing and Commissioning of 3 Nos pipe chemical earthing using 20mm dia GI pipe 1.2 m long, as per IS 1161, making earth grid using 50x6mm GI Flat and riser and connecting risers to various equipment, 8 SWG GI wires, GI nuts, bolts & washers etc. complete as per scope of work, approved drawings and technical specifications,
36
-
-
Erection, testing & commissioning of 11KV line using ACSR (Rabbit) on 9 mtr Long GI Pole supports with Span of 45 Meters having cross bracing in each Double pole (Feeder Bifurcation Work)
-
-
-
Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Project Manager for 11 KV line
26
-
-
Excavation of pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:
546
-
-
Erection of 9 mtr STP (GI) /PCC poles for 11 KV overhead lines by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (8SWG GI wire), pole numbering including cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) or/and 200 mm average size bolders mixed with excavated earth etc as per scope of work, approved drawings and specifications:
546
-
-
Stringing of S/C 3- ph, 3-wire, 11 KV line with ACSR Rabbit conductor (Average span 45 meters).This includes all activities i.e. installation of polymer insulators with mounting hardware , stringing of conductor, binding of conductor with pin insulator using preformed insulator binding, mid span jointing, repairing of conductor using repair sleeve if unavidable, fixing of anti climbing device & danger plate on all 2/3/4 Pole structures & road crossing poles, jumpering etc. complete in all respect. This includes supply and installation of repair sleeves, mid span joint, danger plate & anti-climbing device.
26
-
-
Erection, testing & commissioning of Pre-fabricated steel items like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, transformer mounting structure, DO mounting channel, Transformer clamping set, bracket, clamps, cross bracings, bracings, strain clamp, guarding channels, back clamp and MS nut, bolts & washers etc as per technical specification, approved drawings and scope of work.
546
-
-
Erection of complete 11KV stay set with GI stay wire (7x3.15 mm dia),Including Excavation of stay pit in all kind of soil , binding of stay wire, by providing Guy stay insulator and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.
546
-
-
Installation of Strut Pole as per approved drawing including escavation work and all necessary hard ware fittings
26
-
-
Erection, testing & commissioning of earthing arrangement using 8 SWG GI Wire, GI nuts, bolts & washers as per technical specification, approved drawings and scope of work.
546
-
-
Other Works
-
-
-
Erection, testing & commissioning of Capacitor bank 2.4 MVAR as per approved drawing. (Other Works)
-
-
-
Design, Engineering, Manufacturing, Assembly, Inspection, Testing at manufacturer's works before Despatch, Packing, Supply, Delivery at site and subsequent Storage for Providing additional capacitor bank for 2.4 MVAR Auto type substation mounted with all associated equipment like 11 KV VCB , C& R Panel, CTs, 11 KV Substation class LA ,Isolators of approved ratings with earth switch, RVT, Red Oxide/Alluminium painting , 2.5 Sq.mm PVC armoured stranded Cu control cable, protection circuits and equipment , earthing etc. Obtain TSECL approval to carry out the Installation of capacitor bank in existing 33/11 Kv Sub-stations as per TS, Drawing and scope of work . [Consisting of but not limited to the following items, subject to site requirement]
2
-
-
Replacement of of 11 kV VCB with CT & CR Panel from existing 11KV VCB & its accessories as per approved drawing. (Other Works)
-
-
-
Replacement of of 11 kV VCB with CT & CR Panel from existing 11KV VCB & its accessories as per approved drawing. (Other Works)
2
-
-
Replacement of 11 KV AB switch 400 A As per approved drawing . (Other Works)
-
-
-
Erection, testing & commissioning of new 11 kV, 3-ph, 400 A, 3 Pin type, Vertical Mounting type, Gang Operated, AB Switch along with Support Insulators, Base Channel, down Pipe, Arcing Horns etc. complete as per technical specifications, scope of works and approved drawings
9
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements