Tripura State Electricity Corporation Limited Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Tripura government has posted on its website in a very hassle-free manner. BidAssist is designed in such a manner so as to provide information on all government tenders at one place without any inconvenience.
Tripura State Electricity Corporation Limited - TSECL Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date23 May 2023
Closing Date9 Jun 2023
Tender Amount₹ 2,97,65,572
Costs
EMD
₹ 5,95,311Document Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Infrastructure Development Under Bodhjungnagar And Rk Nagar Industrial Area
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_POWER_38616_1Bid Award Id
ViewTender No
DGM/ED-JRN/2023-24/02Tender Authority
Tripura State Electricity Corporation Limited ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Design, Engineering, manufacturing, Supply of 36kV,400A, 25kA for 3 seconds, 3-ph double break center rotating type (DBCR), Gang Operated, isolator along with Support Insulators, Operating Mechanism, Base Channel down Pipe and all required accessories complete as per technical specifications, scope of works and approved drawings With earth switch
1
-
-
Design, Engineering, manufacturing, Supply of 36kV, 400A, 25kA for 3 seconds, 3-ph double break center rotating type (DBCR), Gang Operated, isolator along with Support Insulators, Operating Mechanism, Base Channel down Pipe and all required accessories complete as per technical specifications, scope of works and approved drawings Without earth switch
6
-
-
Supply of 33 KV Single Phase, outdoor type 2 Core C.T of ratio 200-100 / 1-1 Amp with suitable burden & class of accuracy complete with associated terminal box connecting link etc. and as per relevant IS and technical specification in the BID document
3
-
-
Supply of 33 KV single phase outdoor type PT of suitable burden and accuracy class having following PT ratios 33000V/√3/110V/√3.associated with outdoor terminal box and bi- metalic clamps.
3
-
-
Supply of 10 KA, 30 KV Static Station Valve type Metal Oxide heavy duty lightning surge arrestor of class 3 suitable for operation on 33 KV system conforming to IS: 3070 (P-1) / 1974and latest amendments and as per technical specification in the BID document.
3
-
-
Supply of 33 KV control and relay panel simplex type complete with differential relay, 2- over current & 1-earth fault combined relay,1 Unit of differential relay, auxiliary relay, 1-Voltmeter, 3-Ammeter, CT operated static tri-vector meter(TVM), internal panel wiring, semaphore for VCB breaker & isolator, mimic bus diagram (size 4 mm thick X 10 mm. width) with the panel name: a) 5 MVA , 33/11KV Transformer Control & Relay panel.
1
-
-
Design, Engineering, Supply of 11 KV, 800 Amps, 25 KA for 3 seconds, 350 MVA rupturing capacity Indoor Vaccum Circuit Breaker, complete with Control & Relay Pannel Simplex type with 3Phase pannel top mounted PT of ratio: 11000 /110Volt,110 Volt DC actuated electrical closing mechanism and internal wiring, Numerical as well as electromechanical protection by 2-Over current & 1-earth fault combined ( Micom or other reputed make) digital & electromechanical relays for integrated protection,1 no.electromechanical AREVA Master Trip Relay, auxiliary relays as required,1 no.L&T / SECURE make "Tri- Vector" Meter(SCADA compatible with communication facility) 3- Ammeter, 1 -Voltmeter, 1 -C.T operated static KW meter , with panel bus mounted C.T and integral earthing facility including inernal arc tested panel conforming to relevant ISS/IEC as reqd.including standard indication facilities as per requirement detailed in bid document. CTR = 600-300/ 1-1-0.577. PTR = 11000/√3 / 110/√3.
1
-
-
Design, Engineering, Supply of 11 KV, 800 Amps, 25 KA for 3 seconds, 350 MVA rupturing capacity Indoor Vaccum Circuit Breaker, complete with Control & Relay Pannel Simplex type with 3Phase pannel top mounted PT of ratio: 11000 /110Volt,110 Volt DC actuated electrical closing mechanism and internal wiring, Numerical as well as electromechanical protection by 2-Over current & 1-earth fault combined ( Micom or other reputed make) digital & electromechanical relays for integrated protection,1 no.electromechanical AREVA Master Trip Relay, auxiliary relays as required,1 no.L&T / SECURE make "Tri- Vector" Meter(SCADA compatible with communication facility) 3- Ammeter, 1 -Voltmeter, 1 -C.T operated static KW meter , with panel bus mounted C.T and integral earthing facility including inernal arc tested panel conforming to relevant ISS/IEC as reqd.including standard indication facilities as per requirement detailed in bid document. CTR = 400-200/ 1-1
2
-
-
Supply of Galvanised steel materials for granty Structures of Switchyard as per approved design & bill of materials and technical specification of Bid document.
10
-
-
Supply of Galvanised nuts & bolts with washer and foundation bolts etc. as per approved design & bill of materials and technical specification of Bid document.
0.5
-
-
Supply of 40 mm. dia Aluminium. pipe for equipment bus having current carrying capacity 400A as per relevant IS and technical specification of Bid document.
60
-
-
Supply of Ball & Socket type 70KN, 11 KV disc insulator as per relevant IS and technical specification of Bid document.
50
-
-
Supply of Al. tension clamp suitable for 70 KN ball & socket type disc insulator with ACSR( DOG ) conductor.(Steel- 7/1.57, Al- 6/4.72)as per relevant IS and technical specification of Bid document.
40
-
-
Supply of ACSR( DOG ) conductor.(Steel- 7/1.57, Al- 6/4.72).as per relevant IS and technical specification of Bid document.
200
-
-
Supply of GI Suspension clamp suitable for ACSR(DOG).
30
-
-
Supply of GI "T" - clamp suitable for ACSR (DOG) conductor in one end and 40 mm. dia Al. tube on other end.
30
-
-
Supply of Flexible bimetallic clamp for isolator, CT, PT, breaker, transformer & LA etc.
40
-
-
Supply of Three & half Core, 1.1 KV, 70 Sq. mm. XLPE insulated armoured LT power cable in cable trench and as per engineering requirement and best practice and as per direction of Eng-In-Charge as detailed herein after in this document.
150
-
-
Supply of Heat shrink joint kit suitable for 11 KV XLPE cable of size:i)300mm2 single core (indoor type)(1 no spare) as per relevant IS and technical specification of Bid document.
4
-
-
Supply of Heat shrink joint kit suitable for 11 KV XLPE cable of size:ii)300 mm2 single core (outdoor type)(1 no spare) as per relevant IS and technical specification of Bid document.
4
-
-
Supply of 11 / 6.35 (E), 3-core, 120 mm2, XLPE insulated cable suitable to connect 11 KV indoor breaker with outgoing A.B. switch box as per relevant IS and technical specification of Bid document.
300
-
-
Supply of 11 / 6.35 (E), 1-core, 300 mm2, XLPE insulated cable suitable to connect from Transformer to 11 KV incomer breaker with outgoing A.B. switch box as per relevant IS and technical specification of Bid document.
100
-
-
Supply of Heat shrink jointing kit suitable for 11 KV XLPE cable.i) 3-core,120 mm2 (indoor type) as per relevant IS and technical specification of Bid document.
6
-
-
Supply of Heat shrink jointing kit suitable for 11 KV XLPE cable ii) 3-core, 120 mm2 (outdoor type) as per relevant IS and technical specification of Bid document.
6
-
-
Supply of 1100 Volts grade armoured type Control cable PVC, insulated PVC sheathed, 2.5 mm2 stranded copper conductor of following capacity & Core as per IS:1554(Part-I)1988.a) 2 Core 2.5 mm3 as per relevant IS and technical specification of Bid document.
150
-
-
Supply of 1100 Volts grade armoured type Control cable PVC, insulated PVC sheathed, 2.5 mm2 stranded copper conductor of following capacity & Core as per IS:1554(Part-I)1988. b) 4 Core 2.5 mm2 as per relevant IS and technical specification of Bid document.
200
-
-
Supply of 1100 Volts grade armoured type Control cable PVC, insulated PVC sheathed, 2.5 mm2 stranded copper conductor of following capacity & Core as per IS:1554(Part-I)1988. c) 7 Core2.5 mm2 as per relevant IS and technical specification of Bid document.
150
-
-
Supply of 1100 Volts grade armoured type Control cable PVC, insulated PVC sheathed, 2.5 mm2 stranded copper conductor of following capacity & Core as per IS:1554(Part-I)1988. d) 12 Core 2.5 mm2 as per relevant IS and technical specification of Bid document.
150
-
-
Supply of 110V, 300 AH capacity Sealed & Maintenance Free (SMF) Battery Bank at 10 hour discharge rate comprising of 55 Nos.'Standby Valve Regulated Lead Acid (VRLA) Cells' of 2 Volt each (Average Discharge Voltage 1.90 VPC) as per specification in the Bidding / Tender Document.
1
-
-
Supply of Battery Charger with ±1% Digitally Controlled Regulation suitable for above 110 Volt VRLA Battery Bank with Float and Boost (FC & BC) charging arrangement with all Standard protections housed in free Standing Cabinet of 2.0 mm. gauge as per specification detailed in the Bidding / Tender Document.
1
-
-
Supply of 110V DC distribution panel made of steel sheet (14 SWG) and suitable for floor mounting as per detailed technical specification in the tender document.
1
-
-
Supply of 415 Volt, 3-Ph. 4-wire, 50 HZ AC Distribution Board housed in steel sheet (14 SWG) floor mounting type (vertical) panel for catering auxiliary power supply of the Sub-Station consisting of 1 no.200A incoming, 4 Nos. 63A & 2 Nos. 32 A outgoing Switch etc. as per requirement, technical specification of this tender document.
1
-
-
a) GI Steel materials (Angle, Channel & GI. flat of different size).
1
-
-
b) 45 KN, 11 KV disc insulator with disc fittings.
50
-
-
c) 11 KV Pin insulator including G. I. Pin.
40
-
-
d) 11 KV 3-pole 400 Amp polymeric type G. O. S. (Air Break Switch)
8
-
-
e) 11 KV 3-pole polymeric type D. O. F. unit.
1
-
-
f) GI. nuts & bolts assorted size.
235
-
-
g) ACSR( DOG ) conductor.(Steel- 7/1.57, Al- 6/4.72).
300
-
-
h) 50x6 mm GI flat for clamp
40
-
-
I) GI Straps Nuts & Bolts assorted size
8
-
-
Supply of full galvanised 9.0 mtr long ST Pole direct in Earth in/c Excavation , Back filling & ramming etc as Required ( the poles should be Burried 1/6 th of it's length) as per Technical Specification.
12
-
-
Supply of GI Channel (75x40x40x6mm)
564
-
-
Supply of 11 KV polymaric Disc insulator as per relevant IS and technical specification of Bid document.
90
-
-
Supply of 11 Disc fittings ( ball & socket type ) as per relevant IS and technical specification of Bid document.
90
-
-
Supply of 11 KV polymaric Pin insulator as per relevant IS and technical specification of Bid document.
80
-
-
Supply of triple pole ( 3 ph , 12 KV , 400 A manually Gang operated air Brek switch (polymeric type) including necessary Connection as per relevant IS and technical specification of Bid document.
10
-
-
Supply of A.C.S.R DOG ( 100 sqmm) or equivalent AAS inc laying , hoisting, binding & jumpering with PG clamp etc as required as per TS
0.4
-
-
Supply of GI Nuts and Bolts (Assorted size)
120
-
-
Supply of 95 sq mm Lug's(Aluminium)
60
-
-
Supply of 120sq mm Lug's(Aluminium)
60
-
-
Supply of 3 phase, 3 core, 185 sqmm,6.35/11KV, XLPE insulated aluminium power cable direct in earth i/c excavation of earth upto a trench depth of 1200mm & a width of 500mm in/c supply & protection by two layer 1st class brick soiling, 150 mm layer of sand cushioning, refiling & ramming as per direction of Eng-in- charge. i)11 KV Bus to 11 KV granty 150x4 =600mtr (For 132Kv Sub-station Budjungnagar )as per relevant IS and technical specification of Bid document.
0.6
-
-
Supply of indoor cable end termination with heat shrinkaqble jointing kit complete with all accessories in/c lugs suitable for following size of 3 Core, 185 sqmm XLPE aluminium conductor cable of 11 kv grade as required.Up to185sqmm. (For 132Kv Sub-station Budjungnagar ) and as per relevant IS and technical specification of Bid document.
8
-
-
Supply of Outdoor cable end termination with heat shrinkaqble jointing kit complete with all accessories in/c lugs suitable for following size of 3 Core, 185 sqmm XLPE aluminium conductor cable of 11 kv grade as required.Up to185sqmm. (For 132Kv Sub-station Budjungnagar ) and as per relevant IS and technical specification of Bid document.
8
-
-
Supply of 125 mm dia TATA/JINDAL/BANSAL make (Medium Class) GI pipe as per IS 1239 of different length by all terrain horizontal direction drilling/dagging manually across the road crossing without effecting the existing road. (For 132Kv Sub-station Budjungnagar ).
24
-
-
Supply of 11 KV, 1250 Amps, 25 KA for 3 seconds, 350 MVA rupturing capacity Indoor Vaccum Circuit Breaker, complete with Control & Relay Pannel Simplex type with 3Phase pannel top mounted PT of ratio: 11000 /110Volt,110 Volt DC actuated electrical closing mechanism and internal wiring, Numerical as well as electromechanical protection by 2-Over current & 1-earth fault combined ( Micom or other reputed make) digital & electromechanical relays for integrated protection,1 no.electromechanical AREVA Master Trip Relay, auxiliary relays as required,1 no.L&T / SECURE make "Tri- Vector" Meter(SCADA compatible with communication facility) 3- Ammeter, 1 -Voltmeter, 1 -C.T operated static KW meter , with panel bus mounted C.T and integral earthing facility including inernal arc tested panel conforming to relevant ISS/IEC as reqd.including standard indication facilities as per requirement detailed in bid document. CTR = 400-200/ 1-1 (For 132Kv Sub-station Budjungnagar ).
4
-
-
Supply of GI Breaket Clamp Made by 50x6mm(For 132Kv Sub-station Budjungnagar ).
180
-
-
Supply of 8 mtr long PCC pole(For 132Kv Sub-station Budjungnagar ) as per relevant IS and technical specification of Bid document.
345
-
-
Supply of 9 mtr long PCC pole (For 132Kv Sub-station Budjungnagar )as per relevant IS and technical specification of Bid document.
8
-
-
Supply of ACSR (6/1/2.59 mm dia) weasel conductor(For 132Kv Sub-station Budjungnagar )as per relevant IS and technical specification of Bid document.
0.5
-
-
Supply of 11 KV Polimeric Pin Insulator i/c. GI Pin(For 132Kv Sub-station Budjungnagar ).
60
-
-
Supply of 11 KV Polymer composite 45 KN Disc Insulator(For 132Kv Sub-station Budjungnagar ).
45
-
-
Supply of 11 KV Disc Fittings(For 132Kv Sub-station Budjungnagar )as per relevant IS and technical specification of Bid document.
45
-
-
Supply of 11 KV, 400 Amps polymeric type GOS 3-phase.(For 132Kv Sub-station Budjungnagar )as per relevant IS and technical specification of Bid document.
3
-
-
Supply of 11 KV polymeric type DOF Set, 3-phase.(For 132Kv Sub-station Budjungnagar )as per relevant IS and technical specification of Bid document.
3
-
-
Supply of 9 KV, 5 KA 11 KV polymeric Lightening Arrestor.(For 132Kv Sub-station Budjungnagar )as per relevant IS and technical specification of Bid document.
9
-
-
Supply of 75X40X40X6 mm GI Channel.(Galvanised)(For 132Kv Sub-station Budjungnagar ).
0.53
-
-
Supply of 100X50X50X6 mm GI Channel.(Galvanised)(For 132Kv Sub-station Budjungnagar ).
0.37
-
-
Supply of 65X65x6 mm GI Angle (Galvanised)(For 132Kv Sub-station Budjungnagar ).
0.45
-
-
Supply of 63 KVA, 50 HZ, outdoor type 11/0.433 KV AC Distribution Transformer on Sub-Station Channel base at a height of 2440 mm (approx) above Ground Level with required connection by ACSR from 11 KV line to Transformer via GOS & DOF fastened straining screw, clamp, nuts & bolts as required as per Technical Specification.
3
-
-
Supply of 70 sqmm. Bi-metallic Lugs
48
-
-
Supply of 70 sq.mm PVC Cable as per relevant IS and technical specification of Bid document.
180
-
-
Supply of 10 sq.mm PVC Cable as per relevant IS and technical specification of Bid document.
1220
-
-
Supply of 100 Amp Cut-Out as per relevant IS
27
-
-
Supply of Stay Set complete(galvanised)as per relevant IS and technical specification of Bid document.
320
-
-
Supply of Stay insulator (LT)as per relevant IS
320
-
-
Supply of GI Stranded stay wire (7/2.5 mm)as per relevant IS
1600
-
-
Supply of LT AB cable 3x25+1x16+1x25 sq.mm as per relevant IS and technical specification of Bid document.
15
-
-
Supply of LT Insulation Piercing Connectors (IPC) for making Tee/Tap- off/Service connectors to an ABC/Bare Overhead Line suitable forLT AB Cable 25 sq mm to 95 sq mmas per relevant IS and technical specification of Bid document.
590
-
-
Supply of Dead End/Anchoring Assembly comprising of 'tension bracket', wedge type tension clamp, flexible stainless steel rope for fixing of tension clamp to bracket suitable for 25-95 sqmm bare messenger wire (For LT AB Cable) as per relevant IS and technical specification of Bid document.
295
-
-
Supply of Suspension Assembly Comprising of 'suspension bracket', movable connecting links,galvanised suspension clamp, bracket clamp, nuts & bolts (Suitable for 25-95 sqmm bare messenger wire) for LT AB Cableas per relevant IS and technical specification of Bid document.
395
-
-
Supply of Galvanised steel made 'Eye Hook' with hot dip galvanised nuts & bolts.(Suitable for all size cable) for LT AB Cable as per relevant IS and technical specification of Bid document.
355
-
-
Supply of 1-phase, 200 Amps. all weather proof FRP multi connection LT SERVICE MAIN DISTRIBUTION BOXES as per relevant IS and technical specification of Bid document.
500
-
-
Supply of Galvanised pole clamp for dead end-clamp assembly for 9 mtr. long PCC poleas per relevant IS and technical specification of Bid document.
900
-
-
Supply of Pre-Insulated Jointing sleeve for 25 sqmm LT AB Cable.
700
-
-
Supply of GI Nuts & Bolts (Assorted Size)
870
-
-
Supply of 8 SWG GI wire
10.5
-
-
Supply of Reel insulator (4-10 sq.mm)
506
-
-
Supply of Fabricated bracket clamp of assorted size of 50x6 mm GI flat.
1000
-
-
Supply of GI Stay Clamp i/c GI Nuts & Bolts etc as required
490
-
-
Supplying of outdoor LED Luminious complete with power coated die cast housing and heat resistant tempered glass / diffuser including necessary connection etc as required. 80 Watt LED street light i/c. SPDas per relevant IS and technical specification of Bid document.
335
-
-
Supply of Galvanised LED Street Light Bracket Including Galvanised Bkt Clamp With N& B and other required for installation of the light on PCC Pole.
335
-
-
Supply of 1.5 sq mm cupper wire for connection of street light from existing LT line as per provision of I.E. Rule.
2.8
-
-
Supply of Mild steel sheet Three phase 80A LT Kiosk Box with 04 nos 100A Cut out including Metering Arrengement for providing service connection.
10
-
-
Supply of 1 ph service connection materials(execpt energy meter).
10
-
-
Erection of 5 MVA 33/11 kV, 3 ph, 50 Hz, ONAN, Cu Wound, Outdoor Conventional type Power Transformer along with transformer oil, Buchholtz relay, breather, OTI & WTI, Marshalling Box, Conservator tank, oil level indicator, valves, 2 sets of 50x8 mm GS Neutral Earthing strips {(with braided conductor on bushing end), isolating link, isolation with insulators}, Vent explosion plug, control wiring between sensing equipment and marshalling box, cable supporting tray on the body of transformer, transformer wheels, LV/HV bushing etc as required as per technical specifications, approved drawings and scope of the work uincluding including supply of 90lb rail pole, 3.5mtr long, 2nos for each transformer as rail track as per direction of the Engineer-in-Charge.
1
-
-
Erection of 33 KV, 1250A, 750 MVA rupturing capacity, outdoor Vacuum Circuit Breaker complete with motor operated spring closing (Local / Remote) arrangement with all accessories including lattice support structure,foundation bolts,G.I. nuts & bolts,washers etc. as required and as per relevant ISS complete operative on 110V DC as per direction of the Engineer-in-Charge.
1
-
-
Erection of 36kV,400A, 25kA for 3 seconds, 3-ph double break center rotating type (DBCR), Gang Operated, isolator along with Support Insulators, Operating Mechanism, Base Channel down Pipe and all required accessories complete as per technical specifications, scope of works and approved drawings With earth switch as per direction of the Engineer-in-Charge.
1
-
-
Erection of 36kV, 400A, 25kA for 3 seconds, 3-ph double break center rotating type (DBCR), Gang Operated, isolator along with Support Insulators, Operating Mechanism, Base Channel down Pipe and all required accessories complete as per technical specifications, scope of works and approved drawings Without earth switch as per direction of the Engineer-in-Charge.
6
-
-
Erection of 33 KV Single Phase, outdoor type 2 Core C.T of ratio 200-100 / 1-1 Amp with suitable burden & class of accuracy complete with associated terminal box connecting link etc as per direction of the Engineer-in-Charge.
3
-
-
Erection of 33 KV single phase outdoor type PT of suitable burden and accuracy class having following PT ratios 33000V/√3/110V/√3 associated with outdoor terminal box and bi- metalic clamps as per direction of the Engineer-in-Charge.
3
-
-
Erection of 10 KA, 30 KV Static Station Valve type Metal Oxide heavy duty lightning surge arrestor of class 3 suitable for operation on 33 KV system conforming to IS: 3070 (P-1) / 1974 and latest amendments and as per direction of the Engineer-in-Charge
3
-
-
Erection of 33 KV control and relay panel simplex type complete with differential relay, 2- over current & 1-earth fault combined relay,1 Unit of differential relay, auxiliary relay, 1-Voltmeter, 3-Ammeter, CT operated static tri-vector meter(TVM), internal panel wiring, semaphore for VCB breaker & isolator, mimic bus diagram (size 4 mm thick X 10 mm. width) with the panel name: a) 5 MVA , 33/11KV Transformer Control & Relay panel as per direction of the Engineer-in-Charge.
1
-
-
Erection of of 11 KV, 800 Amps, 25 KA for 3 seconds, 350 MVA rupturing capacity Indoor Vaccum Circuit Breaker, complete with Control & Relay Pannel Simplex type with 3Phase pannel top mounted PT of ratio: 11000 /110Volt,110 Volt DC actuated electrical closing mechanism and internal wiring, Numerical as well as electromechanical protection by 2-Over current & 1-earth fault combined ( Micom or other reputed make) digital & electromechanical relays for integrated protection,1 no.electromechanical AREVA Master Trip Relay, auxiliary relays as required,1 no.L&T / SECURE make "Tri- Vector" Meter(SCADA compatible with communication facility) 3- Ammeter, 1 -Voltmeter, 1 -C.T operated static KW meter , with panel bus mounted C.T and integral earthing facility including inernal arc tested panel conforming to relevant ISS/IEC as reqd.including standard indication facilities as per requirement detailed in bid document. CTR = 600-300/ 1-1-0.577. PTR = 11000/√3 / 110/√3 and as per direction of the Engineer-in-Charge.
1
-
-
Erection of 11 KV, 800 Amps, 25 KA for 3 seconds, 350 MVA rupturing capacity Indoor Vaccum Circuit Breaker, complete with Control & Relay Pannel Simplex type with 3Phase pannel top mounted PT of ratio: 11000 /110Volt,110 Volt DC actuated electrical closing mechanism and internal wiring, Numerical as well as electromechanical protection by 2-Over current & 1-earth fault combined ( Micom or other reputed make) digital & electromechanical relays for integrated protection,1 no.electromechanical AREVA Master Trip Relay, auxiliary relays as required,1 no.L&T / SECURE make "Tri- Vector" Meter(SCADA compatible with communication facility) 3- Ammeter, 1 -Voltmeter, 1 -C.T operated static KW meter , with panel bus mounted C.T and integral earthing facility including inernal arc tested panel conforming to relevant ISS/IEC as reqd.including standard indication facilities as per requirement detailed in bid document. CTR = 400-200/ 1-1 and as per direction of the Engineer-in-Charge.
2
-
-
Erection of Galvanised steel materials for granty Structures of Switchyard as per approved design & bill of materials as per direction of the Engineer-in-Charge.
10
-
-
Erection of Galvanised nuts & bolts with washer and foundation bolts etc. as required.
0.5
-
-
Erection of 40 mm. dia Aluminium. pipe for equipment bus having current carrying capacity 400A as per direction of the Engineer-in-Charge.
60
-
-
Erection of Ball & Socket type 70KN, 11 KV disc insulator as per direction of the Engineer-in-Charge.
50
-
-
Erection of Al. tension clamp suitable for 70 KN ball & socket type disc insulator with ACSR( DOG ) conductor.(Steel- 7/1.57, Al- 6/4.72) as per direction of the Engineer-in-Charge.
40
-
-
Erection of ACSR( DOG ) conductor.(Steel- 7/1.57, Al- 6/4.72) as per direction of the Engineer-in-Charge.
200
-
-
Erection of GI Suspension clamp suitable for ACSR(DOG) as per direction of the Engineer-in-Charge.
30
-
-
Erection of GI "T" - clamp suitable for ACSR (DOG) conductor in one end and 40 mm. dia Al. tube on other end as per direction of the Engineer-in-Charge.
30
-
-
Laying in position, pulling,connection & commissioning of Three & half Core, 1.1 KV, 70 Sq. mm. XLPE insulated armoured LT power cable in cable trench and as per engineering requirement and best practice and as per direction of Eng-In-Charge as detailed herein after in this document.
150
-
-
Erection of Heat shrink joint kit suitable for 11 KV XLPE cable of size:i)300 mm2 single core (indoor type)(1 no spare) as per direction of the Engineer-in-Charge.
4
-
-
Erection of Heat shrink joint kit suitable for 11 KV XLPE cable of size:ii)300 mm2 single core (outdoor type)(1 no spare) as per direction of the Engineer-in-Charge.
4
-
-
Erection of 11 / 6.35 (E), 3-core, 120 mm2, XLPE insulated cable suitable to connect 11 KV indoor breaker with outgoing A.B. switch box as per direction of the Engineer-in-Charge.
300
-
-
Erection of 11 / 6.35 (E), 1-core, 300 mm2, XLPE insulated cable suitable to connect from Transformer to 11 KV incomer breaker with outgoing A.B. switch box as per direction of the Engineer-in-Charge.
100
-
-
Erection of Heat shrink jointing kit suitable for 11 KV XLPE cable.i) 3-core, 120 mm2 (indoor type) as per direction of the Engineer-in-Charge.
6
-
-
Erection of Heat shrink jointing kit suitable for 11 KV XLPE cable.ii) 3- core, 120 mm2 (outdoor type) as per direction of the Engineer-in-Charge.
6
-
-
Erection of 1100 Volts grade armoured type Control cable PVC, insulated PVC sheathed, 2.5 mm2 stranded copper conductor of following capacity & Core as per IS:1554(Part-I)1988.a) 2 Core 2.5 mm3 as per direction of the Engineer-in-Charge.
150
-
-
Erection of 1100 Volts grade armoured type Control cable PVC, insulated PVC sheathed, 2.5 mm2 stranded copper conductor of following capacity & Core as per IS:1554(Part-I)1988. b) 4 Core 2.5 mm2 as per direction of the Engineer-in-Charge.
200
-
-
Erection of 1100 Volts grade armoured type Control cable PVC, insulated PVC sheathed, 2.5 mm2 stranded copper conductor of following capacity & Core as per IS:1554(Part-I)1988c) 7 Core2.5 mm2 as per direction of the Engineer-in-Charge.
150
-
-
Erection of 1100 Volts grade armoured type Control cable PVC, insulated PVC sheathed, 2.5 mm2 stranded copper conductor of following capacity & Core as per IS:1554(Part-I)1988 d) 12 Core 2.5
mm2 as per direction of the Engineer-in-Charge.
150
-
-
Installation & commissioning of 110V, 300 AH capacity Sealed & Maintenance Free (SMF) Battery Bank at 10 hour discharge rate comprising of 55 Nos.'Standby Valve Regulated Lead Acid (VRLA) Cells' of 2 Volt each (Average Discharge Voltage 1.90 VPC) as per direction of the Engineer-in-Charge.
1
-
-
Erection of Battery Charger with ±1% Digitally Controlled Regulation suitable for above 110 Volt VRLA Battery Bank with Float and Boost (FC & BC) charging arrangement with all Standard protections housed in free Standing Cabinet of 2.0 mm. gauge as per direction of the Engineer-in-Charge.
1
-
-
Erection of 110V DC distribution panel made of steel sheet (14 SWG) and suitable for floor mounting as per direction of the Engineer-in-Charge.
1
-
-
Erection of 415 Volt, 3-Ph. 4-wire, 50 HZ AC Distribution Board housed in steel sheet (14 SWG) floor mounting type (vertical) panel for catering auxiliary power supply of the Sub-Station consisting of 1 no.200A incoming, 4 Nos. 63A & 2 Nos. 32 A outgoing Switch etc as required and direction of the Engineer-in-Charge.
1
-
-
Erection of GI Steel materials (Angle, Channel & GI. flat of different size).
1
-
-
Erection of 45 KN, 11 KV disc insulator with disc fittings.
50
-
-
Erection of 11 KV Pin insulator including G. I. Pin.
40
-
-
Erection of 11 KV 3-pole 400 Amp G. O. S. (Air Break Switch)
8
-
-
Erection of 11 KV 3-pole D. O. F. unit.
1
-
-
Erection of ACSR( DOG ) conductor.(Steel- 7/1.57, Al- 6/4.72) as required and direction of the Engineer-in-Charge.
300
-
-
Renovation existing 33 KV line from 132 KV Substation to Rubber Park including straightaning of pole, jungle clearing , stringing of conductor, Adjustment of stay set etc
1
-
-
Erection of 8.0 mtr. long PCC Pole pirect in earth including excavation, refilling and ramming etc. as required complete (1 /6 th of the length of the pole to be embedded in earth) as required and direction of the Engineer-in-Charge.
345
-
-
Erection of 9.0 mtr. long PCC Pole. direct in earth including excavation, refilling and ramming etc. as required complete (1 /6 th of the length of the pole to be embedded in earth) as required and direction of the Engineer-in-Charge.
8
-
-
Laying, hoisting & stringing of ACSR (6/1/2.59 mm) Weasel Conductor including binding, jumpering, etc. as reqduired & as per direction of the Engineer-in-Charge.
0.5
-
-
Erection of GI Stay Set complete direct in earth with 16 mm. dia. 1.8 mtr. long painted stay rod, anchor plate of size 300 X 300 X 8 mm. thick, turn buckle of length 356 mm. with 300 mm. long threaded adjustable 16 mm. dia. GI rod , thimble, guy insulator as per IS specification, hot dip (heavy duty) galvanized stay stranded wire of size 7/2.5 mm. fastened with stay clamps as required. ( including supply of GI clamp & Nuts & Bolts as reqd) and Grouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 river sand: 4 jhama brick aggregate of 20 mm. nominal size) ilc supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming along with centering and shuttering as required ( @
0.119 Cum per stay set as per TSECL Specification)
320
-
-
Erection of 11 KV Polimeric Pin Insulator including G.I Pin for 11 KV system with mechanical strength of 10 KN conforming to ISS:731/1971 with hot dip galvanized M.S forged 11 KV G.I pin alongwith galvanized hexagonal nuts, G.I flat washer and G.I spring washer conforming to ISS: 2486(P-II)/1974 etc. as required in complete as per direction of the Engineer-in-Charge(For 132Kv Sub-station Budjungnagar ).
60
-
-
Erection of Polimeric Disc Insulator Ball and Socket type i/c fittings for 11 KV system (EMS-45 KN) conforming to ISS:731/1971 in angle and dead end locations including tension fittings of EMS-45 KN to accommodate the relevant ACSR conductor size along with nuts and bolts, washer etc. as required in complete as per direction of the Engineer-in-Charge.(For 132Kv Sub-station Budjungnagar ).
45
-
-
Erection of 11 KV, 400 Amps GOS 3-phase complete i/c fixing horizontally & vertically operating pipe & operating handle with nuts & bolts etc. as required (For 132Kv Sub-station Budjungnagar )as per direction of the Engineer-in-Charge.
3
-
-
Erection of 11 KV 3-phase DO Fuse complete with nuts & bolts etc. As required and as per direction of the Engineer-in-Charge.
3
-
-
Erection of 9 KV, 10 KA 11 KV polymeric lightening Arrestor i/c. necessary connection complete as per direction of the Engineer-in Charge.
9
-
-
Erection of 2.8 mtr. long made of 75 X 40 X 40 X 6 mm. MS Channel for Sub-Station GOS, DOF bracket as per direction of the Engineer-in-Charge.
12
-
-
Erection of 2.2 mtr. long made of 75 x 40 x 40x 6 mm. MS Channel for double pole top bracket as per direction of the Engineer-in-Charge.
10
-
-
Erection of 0.3 mtr. long made of 75 x 40 x 40x 6 mm. MS Channel for single pole top bracket as per direction of the Engineer-in-Charge.
9
-
-
Erection of 1.2 mtr. long made of 75 x 40 x 40x 6 mm. MS Channel for single pole bottom bracket as per direction of the Engineer-in-Charge.
6
-
-
Erection of 1.5 mtr. long made of 75 x 40 x 40x 6 mm. MS Channel for tapping bracket as per direction of the Engineer-in-Charge.
6
-
-
Erection of 2.8 mtr long made of 100x50x50x6 mm. MS Channel for transformer base as per direction of the Engineer-in-Charge.
9
-
-
Erection of 0.8 mtr long made of 100x50x50x6 mm. MS Channel for transformer base as per direction of the Engineer-in-Charge.
6
-
-
Erection of 3.2 mtr long made of 100x50x50x6 mm. MS Channel for transformer sub-station top bracket as per direction of the Engineer-in- Charge.
3
-
-
Erection of 2.5 mtr. long made of 65x65x6 mm MS Angle for double pole guard bracket as per direction of the Engineer-in-Charge.
3
-
-
Erection of 2.8 mtr. long made of 65x65x6 mm MS Angle for GOS handle, DOF bracket as per direction of the Engineer-in-Charge.
3
-
-
Erection of 1.5 mtr long made of 65x65x6 mm. MS Angle for single pole guard bracket. as per direction of the Engineer-in-Charge.
3
-
-
Erection of 3.2 mtr long made of 65x65x6 mm. MS Angle for sub-station guard bracket. as per direction of the Engineer-in-Charge.
3
-
-
Erection of 2 mtr long 4-wire LT C-bracket i/c. clamp, nuts & bolts by 65X65X6 mm MS Angle as per direction of the Engineer-in-Charge.
24
-
-
Supply & Erection of earthing set as per ISS : 3043 of 1966 and with latest amendment if any, 2.5 mtr long G.I. pipe (ISI marked) of 40 mm diameter with suitable holes on pipe circumference including a pair of clamps (made of 50 X 6 mm M.S. flat), galvanized nuts & bolts along with alternate layers of salt & charcoal including supply of 4.0 mtr long, 12mm dia PVC pipe for each earthing set etc. as required and as per direction of the Engineer-in-Charge.
12
-
-
Erection & commissioning of 63 KVA, 50 HZ, outdoor type 11/0.433 KV AC Distribution Transformer on Sub-Station Channel base at a height of 2440 mm (approx) above Ground Level with required connection by ACSR from 11 KV line to Transformer via GOS & DOF fastened straining screw, clamp, nuts & bolts as required as per Technical Specification and as per direction of the Engineer-in-Charge.
3
-
-
Erection of 70 sq. mm PVC Cable i/c fitting fixing 100 ampere cut out on wooden plank making connection from Transformer LT side to overhead LT Line via fuse unit of unarmored PVC cable 1100-V grade conforming to ISS: 1554 (P-I) /1988 of the following sizes and the cables shall be properly crimped by bi-metallic lugs at contact areas as per direction of the Engineer-in-Charge. (Karai Wooden Plank 500X300X25 mm will be supplied by the Contractor)
5
-
-
Laying, hoisting and drawing of 1.1 KV Class, LT 3-phase, Aerial Bunched Cable of size 3X25+1CX16+1X25 sqmm for LT Overhead line on existing pole as required and as per direction of the Engineer-in-Charge.
15000
-
-
Erection and fitting fixing of LT Insulation Piercing Connectors (IPC) for making Tee/Tap-off/Service connectors to an ABC/Bare Overhead Line suitable for LT AB Cable 25 sq mm to 95 sq mm as required and as per direction of the Engineer-in-Charge.
590
-
-
Erection & fitting fixing of Dead End/Anchoring Assembly comprising of tension bracket wedge type, galvanised tension clamp, flexible stain steel rope for fixing of tension clamp (Suitable for 25-95 sq mm bare messenger wire) on existing pole with the help of galvanised Clamp (made of 2nos, 50X6mm Flat) and nuts & bolts including supply of galvanised clamp, nuts & bolts etc. (For LT AB Cable) as required and as per direction of the Engineer-in-Charge.
295
-
-
Erection & fitting fixing of Suspension Assembly Comprising of 'suspension bracket', movable connecting links, galvanised suspension clamp, bracket clamp, nuts & bolts (Suitable for 25-95 sq mm bare messenger wire) on existing pole with the help of galvanised clamp (made of 2nos, 50X6mm Flat) and nuts & bolts including supply of galvanised clamp, nuts & bolts etc. for LT AB Cable as required and as per direction of the Engineer-in-Charge.
395
-
-
Erection & fitting fixing of galvanised steel made 'Eye Hook' with hot dip galvanised nuts & bolts. (Suitalble for all size cable) for LT AB Cable as required and as per direction of the Engineer-in-Charge.
355
-
-
Erection & Commissioning of pole mounted 1-phase, 200 Amps all weather proof Polycarbonate multi connection LT SERVICE MAIN DISTRIBUTION BOXES
500
-
-
Erection of Pre-Insulated jointing sleeve for 25 sq. mm LT AB cable.
700
-
-
Erection in/c supply of Pre-Insulated Bi-metallic Socket for 25 sqmm LT
AB Cable.
550
-
-
Cutting, clearing & disposal of jungle/tree of any girth from 3(three) meter either side of HT/LT line of providing required vertical and horizontal clearance as per provision of I.E. Rule.
13
-
-
fixing of outdoor LED Luminious complete with power coated die cast housing and heat resistant tempered glass / diffuser including necessary connection etc as required. 72 Watt LED street light i/c. SPD as per direction of the Engineer-in-Charge.
335
-
-
Erection of Mild steel sheet Three phase 80A LT Kiosk Box with 04 nos 100A Cut out including Metering Arrengement for providing service connection as required and as per direction of the Engineer-in-Charge.
10
-
-
Extension of 1 ph service connection.
10
-
-
Detailed Survey of the proposed Street light by taking a suitable number of trial pits along with the route including submission of layout Drawing of Surveyed riute with respect to landmark and showing and highlighting all major parameter clearance with respect to parmanent installation of power line, gas line and other obstracles likely to be faced etc. ( for both overhead and under ground during execution as necessary)
13
-
-
Supply & fixing of PVC casing and capping in/c. all accessories as required (Make :
Presto - plast / Precision) a) 25 mm X 10 mm.
100
-
-
Supply & fixing of PVC casing and capping in/c. all accessories as required (Make : Presto - plast / Precision) b) 40 mm X 20 mm.
60
-
-
Supply & Erection of PVC insulated copper conductor cable in existing PVC casing - capping / conduit in/c. necessary connection as required. (Make: - Havell's / National / Plaza.)a) 2 X 1.5 Sq. mm.
150
-
-
Supply & Erection of PVC insulated copper conductor cable in existing PVC casing - capping / conduit in/c. necessary connection as required. (Make: - Havell's / National / Plaza.)b) 2 X 4 Sq. mm.
100
-
-
Supply & Erection of PVC insulated copper conductor cable in existing PVC casing - capping / conduit in/c. necessary connection as required. (Make: - Havell's / National / Plaza.)c) 2 X 6 Sq. mm.
50
-
-
Supply & fixing of accessories for PVC casing and capping in/c. necessary connection as required. Make: - Anchor / Precision / Cona (Nice) / SSK /J.J. Deluxe (Fancy).a) Ceiling rose.
20
-
-
fixing of accessories for PVC casing and capping in/c. necessary connection as required. Make: - Anchor / Precision / Cona (Nice) / SSK /
J.J. Deluxe (Fancy).b) Angle lamp holder.
20
-
-
Supply & fixing of accessories for PVC casing and capping in/c. necessary connection as required. Make: - Anchor / Precision / Cona (Nice) / SSK / J.J. Deluxe (Fancy).c) 5/6 Amp. piano switch.
50
-
-
Supply & fixing of accessories for PVC casing and capping in/c. necessary connection as required. Make: - Anchor / Precision / Cona (Nice) / SSK / J.J. Deluxe (Fancy).d) 5/6 Amp. socket.
8
-
-
Supply & fixing of accessories for PVC casing and capping in/c. necessary connection as required. Make: - Anchor / Precision / Cona (Nice) / SSK /J.J. Deluxe (Fancy).e) 15/16 Amp.piano switch.
5
-
-
fixing of accessories for PVC casing and capping in/c. necessary connection as required. Make: - Anchor / Precision / Cona (Nice) / SSK /J.J. Deluxe (Fancy)f) 15/16 Amp. 5 pin socket.
5
-
-
fixing of accessories for PVC casing and capping in/c. necessary connection as required. Make: - Anchor / Precision / Cona (Nice) / SSK /J.J. Deluxe (Fancy)g) Ding dong call bell.
1
-
-
Supply & fixing of 415 volt, 63 amp. TPN main switch (Rewireable) front handle in/c. drilling holes on wooden board and connection as required. (Make: Havells / HPL / Standard).
1
-
-
Supply & fixing of 6 ways metal enclosure for 240/415 Volts MCB (SP/SPN/DP/FP) complete with necessary bus bar, earth bar, neutral link etc. including connection as required. (Make: - Havells / HPL / Standard).
2
-
-
Supply & fixing of 5 to 32 Amps. rating 240 Volts 'G' Series MCB of single pole in the existing MCB DB complete with connection etc. as required. (Make: - Havells / HPL / Standard).
10
-
-
Supply & Erection of earthing with 40 mm dia. GI perforated pipe of 4.5 mtr. Long with masonary enclosure on top etc. as required.
1
-
-
Supply of salt and charcoal for pipe earth elctrode as required.
2
-
-
Supply & fixing of 8 swg GI wire on surface or in conduit pipe for loop earthing.
10
-
-
Laying earth connection from earth electrode with 8 swg GI wire / copper wire in 15 mm dia. G.I. pipe from earth electrode as required.
12
-
-
Fixing of double box type FTL fittings complete with 2 nos. 40 / 36 watt copper ballast, 2 nos. 40/36 watt flurosent tube, starter, holder, pf improving capacitor etc. in/c. connection as required. (Make: - Phillips / Crompton / Bajaj).
8
-
-
a) Fixing of accessories for PVC casing and capping in/c. necessary connection as required. 102 mm X 102 mm, size wooden formica board with bakelite cover.
30
-
-
b) Fixing of accessories for PVC casing and capping in/c. necessary connection as required. 102 mm X 178 mm, size wooden formica board with bakelite cover.
8
-
-
c) Fixing of accessories for PVC casing and capping in/c. necessary connection as required. 152 mm X 203 mm, size wooden formica board with bakelite cover.
4
-
-
d) Fixing of accessories for PVC casing and capping in/c. necessary connection as required. 203 mm X 300 mm, size wooden formica board with bakelite cover.
6
-
-
e) Fixing of accessories for PVC casing and capping in/c. necessary connection as required. 254 mm X 300 mm, size wooden formica board with bakelite cover.
4
-
-
Supply & Fixing of 1200 mm sweep ceilling fan including fixing of regulator and wiring in down rod of standard length etc. as required. (Make: - Crompton / Khaitan /Orient / USHA).
5
-
-
Supply & Fixing of 18 watt CFL in the existing angle holder. (Make: - Phillips / Bajaj /Orpat.
15
-
-
Erection of 9.0 mtr long ST Poledirect in Earth in/c Excavation , Back filling & ramming etc as Required ( the poles should be Burried 1/6 th of it's length) as per Technical Specification and as per direction of the Engineer-in-Charge.
12
-
-
Ereection of fabricated MS channel / Angle cross arms with clamps , N/B Complete as reqd on poles as per T.S a) 2.8 mtr. Long MS Ch (75X40X40X6mm) for GOS base support. and as per direction of the Engineer-in-Charge.
28
-
-
Erection of 11 KV polymaric Disc insulator as per required and as per direction of the Engineer-in-Charge.
90
-
-
Erection of 11 KV polymaric Pin insulator as per required and as per direction of the Engineer-in-Charge.
80
-
-
Erection & connection of triple pole ( 3 ph , 12 KV , 200 A manually Gang operated air Brek switch including necessary Connection as per required and as per direction of the Engineer-in-Charge.
10
-
-
Stringing of A.C.S.R DOG ( 100 sqmm) or equivalent AAS inc laying , hoisting, binding & jumpering with PG clamp etc as required as per TS
0.4
-
-
Laying & comissioning of 3 phase, 3 core, 185 sqmm,6.35/11KV, XLPE insulated aluminium power cable direct in earth i/c excavation of earth upto a trench depth of 1200mm & a width of 500mm in/c supply & protection by two layer 1st class brick soiling, 150 mm layer of sand cushioning, refiling & ramming as per direction of Eng-in- charge. i)11 KV Bus to 11 KV granty 150x4 =600mtr as per required and as per direction of the Engineer-in-Charge.
0.6
-
-
Erection of indoor cable end termination with heat shrinkaqble jointing kit complete with all accessories in/c lugs suitable for following size of 3 Core, 185sqmm XLPE aluminium conductor cable of 11 kv grade as required.Up to
185sqmm as per required and as per direction of the Engineer-in-Charge.
8
-
-
Erection of Outdoor cable end termination with heat shrinkaqble jointing kit complete with all accessories in/c lugs suitable for following size of 3 Core, 185sqmm XLPE aluminium conductor cable of 11 kv grade as required.Up to 185sqmm as per required and as per direction of the Engineer-in-Charge.
8
-
-
Laying of 125 mm dia TATA/JINDAL/BANSAL make (Medium Class) GI pipe as per IS 1239 of different length by all terrain horizontal direction drilling/dagging manually across the road crossing without effecting the existingroad as per required and as per direction of the Engineer-in-Charge.
24
-
-
Erection testing and commissioning of 11 KV, 1250 Amps, 25 KA for 3 seconds, 350 MVA rupturing capacity Indoor Vaccum Circuit Breaker, complete with Control & Relay Pannel Simplex type with 3Phase pannel top mounted PT of ratio: 11000 /110Volt,110 Volt DC actuated electrical closing mechanism and internal wiring, Numerical as well as electromechanical protection by 2-Over current & 1-earth fault combined ( Micom or other reputed make) digital & electromechanical relays for integrated protection,1 no.electromechanical AREVA Master Trip Relay, auxiliary relays as required,1 no.L&T / SECURE make "Tri- Vector" Meter(SCADA compatible with communication facility) 3- Ammeter, 1 -Voltmeter, 1 -C.T operated static KW meter , with panel bus mounted C.T and integral earthing facility including inernal arc tested panel conforming to relevant ISS/IEC as reqd.including standard indication facilities as per requirement detailed in bid document. CTR = 400-200/ 1-1 (For 132Kv Sub-station Budjungnagar ) and as per direction of the Engineer-in-Charge.
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements