Public Works Department Tender

Brick masonry work in cement mortar in substructure complete excepting pointing & plastering, as per drawing & MoRD technical specification Clauses 602, 603, 604, 1202 and 1204

Plastering with cement mortar (1:4) 15 mm thick on brickwork in substructure as per MoRD technical specification Clauses 613.4 & 1204.

Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per MoRD Technical Specification Clause 301.5

Flat brick soling :- Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412.

Brick on edge soling :-- Providing and laying brick on edge soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with sand, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412.

Cast in situ cement concrete M-20 kerb. Construction of cement concrete kerb with top and bottom width 115 & 165 mm respectevly 250 mm high in M-20 grade PCC on M-10 grade foundation 150 mm thick, foundation heaving 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per drawing and MoRTH technical specification clauses 409. A) Using Concrete mixer.

80 mm thick factory made c.c interlocking paver block of M -35Grade Providing and laying thick factory made Chamfered edge cement concrete paver blocks of required strength, thickness& Size/shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding/laying of inter locking paver blocks into the sand bedding layerthrough vibratory compaction by using palte vibrator , filling the joints with fine sand and cutting of paver blocks as per required size and pattern , finishing and sweeping extra sand in footpath ,parks,lawn, drive ways or light traffic parkingetc complete as per specifications& approval / direction of Engineer -in -Charge.(a)80 mm thick c.c paver block of M-35 withapproved colour, design and pattern.