Municipal Corporation Tender

First class brick work foundation and pinth including cost of all materials as required complete In cement mortr 1:4(1cement:4 fine sand)

Providing and laying flat brick soling layer on prepared subgrade according to lines grades and cross-sectionshown on the drawing filling joints with earth free from clay with a plasticity index not exceeding 6 watering and rolling the same with three wheeled road roller 80-100KN as per MORD technical Specication clause 412.

Half brick masonry work with First class brick work foundation and pinth including cost of all materials as required complete In cement mortr 1:4(1cement:4 fine sand)

Supply & Installation of pre-painted Galvalume Sheets for roofing/cladding (size,Shape and pitch of corrugation as approved by Engineer-in charge) in 550 MPA steel grade made out of cold rolled steel coted with Zinc-Aluminium alloy coating of 43% Zn 55% Al and 1.5 % silicon confirming to ASTM A792/A79m and AS 1397 Alloy coating AZ150/AZ70 colour coated with high quality polyster coating top coated of modified polyeste of 20 micron back side coat of 5 micron having epoxy pamer coat of 5 micron on both side sheet should have protective guard film of 25 micron minimum to avoid scratches whiletransportion and should be supplied in single length upto 12 meter or as desired by Engineer-in-charge the sheet shall be fixed using self drilling /self tapping screws of size(5.5 x55 mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required 0.50 mm thickness.

Providing and laying in position cement concrete of specified grade excluding the cost of centering shuttering grade excluding the cost of centering and shuttering All work plinth level 1:2:4(1cement:2fine snd:4 gradd stone aggregate 20 mm nominal size)

Steel work in built up tubular (round,square or rectangular hollow tubes etc.) trusses etc including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with specal washer etc complete

Supply & Installation of pre-painted Galvalume Sheets for roofing/cladding (size,Shape and pitch of corrugation as approved by Engineer-in charge) in 550 MPA steel grade made out of cold rolled steel coted with Zinc-Aluminium alloy coating of 43% Zn 55% Al and 1.5 % silicon confirming to ASTM A792/A79m and AS 1397 Alloy coating AZ150/AZ70 colour coated with high quality polyster coating top coated of modified polyeste of 20 micron back side coat of 5 micron having epoxy pamer coat of 5 micron on both side sheet should have protective guard film of 25 micron minimum to avoid scratches whiletransportion and should be supplied in single length upto 12 meter or as desired by Engineer-in-charge the sheet shall be fixed using self drilling /self tapping screws of size(5.5 x55 mm) with EPDM washers filled with white lead complete for Ridges/valley Gutter flashing of width 610mm

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement All work upto plinth level 1:1.5:3(1cement:1.5 fine sand:3 grded stone aggregate 20 mm nominal size)

Reinforcement for RCC work including straightening cuting bending placing in position and binding complete upto plinth level thermo-Mechanically Treated bars grade Fe 500D or

12mm cement plaster of mix In cement mortar 1:4(1cement :4fine sand)

Neat cement punning

Finishing with duluxe Multi surface paint system for interiors and exteriors using primer as per manufactures specifications [Payment shall be made after submission of Test certificate issued by the Manufacture] Painting steel work with deluxe multi Surface paint to give an even shade.Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.80 ltr/10 sqm of approved brand and manufacture.