Municipal Corporation Tender

First class brick work in foundation and plinth including cost of all materials as required complete. In cement mortar 1:4 (1 cement : 4 fine sand).

Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete. In cement mortar 1:4 (1 cement : 4 fine sand).

12 mm cement plaster of mix: Cement mortar 1:4 (1 cement : 4 fine sand).

Neat cement punning.

Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per specifications & approval/ direction of the Engineer -in-Charge:(a) 80 mm thick c.c. paver block of M-35 grade with approved colour, design and pattern.

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants, as required and as per direction of the Engineer-in-charge.

Supply & installation of pre-painted Galvalume sheets for roofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550mpa steel grade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTMA792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, havingepoxy primer coat of 5 micronon both side. Sheet shouldhaveprotectiveguardfilmof25micronsminimum to avoid scratcheswhiletransportatioandshoulbe supplied in singlelength upto 12 metre or as desired by Engineer-incharge.The sheet shall be fixedusing self drilling/self tapping screws of size (5.5x 55mm) with EPDMwashers filled withwhitelead complete upto anypitch in horizontal/ vertical or curved surfacesexcluding the cost ofpurlins, rafters and trusses andincluding cutting to size and shape wherever required and as per direction of Engineer-in-charge. 0.45 mm thickness.

Supply & installation of pre-painted Galvalume sheetsroofing accessories in 550mpa steel steel grade, madeout of Cold rolled steel coated with Zinc-Aluminialloy coating of 43.5% Zn, 55% Al and 1.5% Siliconconfirming to AASTM A792/A792M and AS1397, Alloycoating AZ150/AZ70,colour coated with high qualitypolyester coating, top coated of modified polyester of 20micron, back side coat of 5 micron, having epoxy primercoat of 5 micron on both side etc. complete as perdirection of Engineer-in-charge. Sheet should haveprotective guard film of 25 microns minimum toavoid scratches while transportation. Sheet shouldhave protective guard film of 25 microns minimumto avoid scratches while transportation. The sheetshall be fixed using self drilling /self tapping screwswith EPDM washers complete forRidges/Valley/Gutter/Flashing of width 610mm: 0.50 mm thickness.

Steel work in built up tubular (round, square orrectangular hollow tubes etc.) trusses etc., includingcutting, hoisting, fixing in position and applying apriming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete.

Providing structural steel work in single section fixed with or without connecting plate including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.

Finishing walls with textured exterior paint of requiredshade of approved brand and manufacture on old work( one or more coats ) including preparation of surface asrequired complete as per direction of the Engineer incharge.

Finishing with epoxy paint ( one or more coats ) ofapproved brand and manufacture at all locations prepared and applied as per manufacturer's specification on old work including preparation of surface etc. as required complete as per direction of the Engineer in charge:- On cooncrete work.

Finishing with epoxy paint ( one or more coats ) ofapproved brand and manufacture at all locations prepared and applied as per manufacturer's specification on old work including preparation of surface etc. as required complete as per direction of the Engineer in charge:- On steel work.

12 mm cement plaster of mix: Cement mortar 1:4 (1 cement : 4 fine sand).

Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framedand fixed in position : Local Teak wood.

Providing and fixing panelled / or panelled and glazedshutters for doors, windows and clerestory windowsincluding ISI marked bright finished / blackenamelled M.S butt hinges with necessary screwsexcluding panelling and or glazing, which will be paidfor separately but including the wooden beading of 20× 12 mm for fixing panelling and or glazing as perdirection of Engineer-In-Charge.

Demolishing cement concrete manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge:- Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-RCC work in beams, lintels, bands, plain window sills, staircases and spiral staircases excluding precast spiral staircase. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size).

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering shuttering including struttings, propping etc. and removal of form work for: Suspended fioors, roofs, landings,balconies and access platform with timber planks

Providing and laying Polished Granite stonflooring in required design and patterns, in linearas well as curvilinear portions of the building allcomplete as per the architectural drawings withPolished Granite stone slab jet Black, Cherry Red,Elite Brown, Cat Eye or equivalent over 20 mm(average) thick base of cement mortar 1:4 (1cement : 4 fine sand) laid and jointed with cementslurry and pointing with white cement slurryadmixed with pigment of matching shadeincluding rubbing , curing and polishing etc. allcomplete as specified and as directed by theEngineer-in-Charge. 14 mm thick stone slab.